P
PrintablesMadmission
FIAT 500 GPS Blue&Me Mobile Halterung
Es wird ein Magnet benötigt, wie im Link oder ähnlich.…
- Pobrania
- 321
- Polubienia
- 12
- Ocena
- 5
Wyniki wyszukiwania: gps
1319 modeli
P
PrintablesBenjamin Tamasi
Nextbase 522GW Dashcam Click&Go PRO GPS Mount 3M Base
My Nextbase 522GW came with two adapters for attaching to the window, a suction cup and a flat plastic base for use with a small piece of 3M VHB. I had only used the suction cup for years and now that I want to permanently attach it with…
- Pobrania
- 235
- Polubienia
- 19
- Ocena
- 5
P
PrintablesVK3BQ
Leo Bodnar MINI GPS bracket Icom IC-9700 IC9700 9700
This is a Mount to place the Leo Bodnar 10MHz reference mini GPS module on the side of the ICOM IC-9700 radio. This uses 2x M4x8mm screws (MAX 8mm, or you will damage the radio) I printed this side on, with supports on build plate only,…
- Pobrania
- 186
- Polubienia
- 8
- Ocena
- 0
P
Printablesgorajewsky_fpv
BetaFPV Pavo Pico / Pavo20 / Femto GPS mount BZ121 gps holder
Uchwyt GPS BetaFPV Pavo Pico / Pavo20 / Femto BZ121
- Pobrania
- 175
- Polubienia
- 9
- Ocena
- 0
P
Printableswerztimo
Garmin GPSMAP Holder
The mout should work with all Garmin GPSMAP devices (tested with GPSMAP 65s). The mounting holes are spaced accordingly (31x41mm, ⌀ 5mm). The mount is very tight initially, but it gradually becomes a little looser and easier to put on.…
- Pobrania
- 156
- Polubienia
- 18
- Ocena
- 5
P
Printablesnakor
Carpuride GPS holder for KTM 1290 super adventure
3D printed Carpuride GPS holder, with holes for screws and nuts. Steel head bolts 6 hexagonal internal Ø5 x L.20 mm
- Pobrania
- 141
- Polubienia
- 5
- Ocena
- 0
P
PrintablesEGutierrez
2015 Subaru outback GPS Mount
Clip mount v2 Having the original model in place these last couple of months, I liked the simplicity, but truth be told I missed having the vent accessible. So here is an updated version that straddles the emergency lights button and…
- Pobrania
- 91
- Polubienia
- 11
- Ocena
- 4,5
P
Printableserdnatter
GEPRC Cinebot 30 Gopro and TBS M8.2 GPS mount
GEPRC Cinebot 30 GoPro mount with integrated mount for TBS M8.2 GPS module Remixed “Cam mount for GEPRC Cinebot 30 (Gopro 8 9 10 11 12 & DJI Action 2)” form Lenny B FPV The picture shows the part printed with Prusament PETG, 0.15mm, 100%…
- Pobrania
- 88
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMarkus_94
Spacer SIGMA SPORT GPS MOUNT / GARMIN MOUNT
Distanzscheiben für Sigma Sport Navihalter, da ohne Scheibe mein ROX 4.0 kontakt zum Vorbau hat. Längere Schrauben ist notwendig → Original M3x6 (Senkschraube) Spacers for Sigma Sport navi mounts, as my ROX 4.0 has contact with the stem…
- Pobrania
- 48
- Polubienia
- 4
- Ocena
- 0
P
Printablespaw3D
SpeedyBee Maser 5 v2 - Mateksys M10Q-5883 GPS Compass Mount Rear (20x20 mm)
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. It mounts the module to the drone's rear. Special care was taken to design the mount such that the module sits…
- Pobrania
- 46
- Polubienia
- 2
- Ocena
- 0
P
Printablespaw3D
SpeedyBee Maser 5 v2 - Mateksys M10Q-5883 GPS Compass Mount Top (20x20 mm)
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. Instead of mounting the module to the drone's rear, the mount moves it to the front. The main purpose is to get…
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLaurens
Narvie GPS Tracker Bike Holder - Bottle cage mount
Useful for mounting a Narvie GPS Tracker to your bike's bottle-mount. Fits around the Narvie GPS Tracker , which will fit a bit loose, so you could use some tape to fill the gaps.
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
Printablesalecharp
Decathlon GPS mount attachement
WARNING: The two new screws holes which this model is adding to the GPS mount might not be at the same location as the one on Garmin's mount. This is, to my knowledge, only compatible with…
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
Printablesmuzi.works
H2T - Case for Heltec T114 with GPS running Meshtastic
A GPS enabled Meshtastic® case for the Heltec T114 board with GPS module. Install the buttons, board, GPS module, SMA Pigtail and snap the 2 halves of the case together. Secure with a M3 screw for a rock solid enclosure. License and Fair…
- Pobrania
- 6748
- Polubienia
- 895
- Ocena
- 4,88
P
PrintablesAdi CEvil
3D-Printed Enclosure for Heltec V4（GPS）
This is a cool case. Designed for Heltec WiFi LoRa 32 (V4) with GPS module support. Hardware: 3000mAh battery, PCB, antenna, GPS module. Three M2.5×8 self-tapping screws required. Personal use only. Commercial rights and custom design:…
- Pobrania
- 2234
- Polubienia
- 160
- Ocena
- 4,44
P
PrintablesAlley Cat
Heltec T114 Pocket GPS Case
Commercial Use and Attribution Notice: Alley Chat HT114 Pocket Pro © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…
- Pobrania
- 2035
- Polubienia
- 242
- Ocena
- 5
P
Printablesslabua
Heltec LoRa32 V3 Meshtastic Case with Encoder/Buzzer/GPS/Environment sensor, M5Stack CardKB Keyboard-ready
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
- Pobrania
- 1769
- Polubienia
- 432
- Ocena
- 4,78
P
PrintablesAdi CEvil
3D-Printed Case for Heltec V4（GPS）
This is a cool case. Designed for Heltec WiFi LoRa 32 (V4) with GPS module support. Hardware: 3000mAh battery, PCB, antenna, GPS module. Three M2.5×8 self-tapping screws required. Personal use only. Commercial rights and custom design:…
- Pobrania
- 1447
- Polubienia
- 101
- Ocena
- 4,4
P
PrintablesThe Bengineer
GEPRC Mark5/4 28mm GPS mount (BE280)
28mm GPS mount for the GEPRC Mark5 and Mark4 FPV drone frame. The VTX antenna mount is for TBS-style antennas, and the receiver antenna mount is for standard T-antennas. My reason for using a 28mm GPS instead of the usual 18–25mm one is…
- Pobrania
- 1129
- Polubienia
- 47
- Ocena
- 5
P
PrintablesTom_Ash
3D-Printed Enclosure for Heltec V4（GPS）Fixed
There are several problems with the original case, this remix aims at solving them all: - Can't enter dfu - Can't connect and disconnect battery - There is to little space for the battery (thickness) - The battery pushes onto the gps…
- Pobrania
- 1127
- Polubienia
- 125
- Ocena
- 4,71
P
PrintablesAlex
SpeedyBee Mario 5 GPS Mount for 21x21mm GPS module such as HGLRC M100-5883
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…
- Pobrania
- 1106
- Polubienia
- 44
- Ocena
- 5
P
Printablesnbss
KTM 890 Adventure GPS Mount
Created GPS Mount after waiting for KTM Powerparts GPS mount (A61012992044) being on backorder. There are two file versions. One that fits the 890-R windscreen and the other for the S-model windscreen. The S-model version extends out…
- Pobrania
- 1082
- Polubienia
- 41
- Ocena
- 5
P
PrintablesMircea
BN220 GPS mount for GEPRC Mark5
BN220 GPS mount for GEPRC Mark5 Allows the BN220 GPS module to be mounted on a GEPRC Mark5 with the TBS Crossfire configuration. Besides the BN220, it also houses the VTX antenna and the Immortal Crossfire T antenna. The VTX antenna and…
- Pobrania
- 1038
- Polubienia
- 43
- Ocena
- 5
P
PrintablesAlley Cat
Heltec T114 Slim Pro GPS Case
Commercial Use and Attribution Notice: Alley Chat HT114 Slim Pro © 2024 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…
- Pobrania
- 921
- Polubienia
- 120
- Ocena
- 5
P
PrintablesKelignor
GEPRC mark 4 7 inch GPS(BN880) + two sma mount
This is my first design of mount for BN 880 GPS and two sma connector from DJI air unit. Printed in Flexfill 98A with 0,4 nozzle at 0,2 layer height
- Pobrania
- 910
- Polubienia
- 41
- Ocena
- 0
P
PrintablesAlex
SpeedyBee Mario 5 GPS Mount for 25x25mm GPS module BZ-251
This remixed part provides a mounting for 25x25 mm BZ-251 GPS module on a SpeedyBee Mario 5 frame. As I don't own such GPS, please let me know if it fits.
- Pobrania
- 885
- Polubienia
- 36
- Ocena
- 0
P
PrintablesGolden4
Segway Navimow GPS 90° wall mount
This is a remix from @massis to mount the Navimow's GPS receiver with a 90° angle.
- Pobrania
- 852
- Polubienia
- 38
- Ocena
- 4,67
P
Printablesandreirusu99
GepRC Mark5 GPS, vTX and RX antenna mount
The part accepts a BN-220 GPS module, a standard vTX pigtail with a flange mount, and standard 3mm antenna tubes (included with the Mark5 frame kit) Prints without support. Can be printed in PETG or TPU, depends on what you prefer. Photos…
- Pobrania
- 821
- Polubienia
- 41
- Ocena
- 5
P
PrintablesYorikMol
SpeedyBee Mario 5 Single Antenna+GPS+XT60
I needed a mount for a single SMA adapter, an 18mm x 18mm GPS, and an XT60 connector. There was no such variant among the models provided by Speedy Bee, so I took the closest original model, which already had mounting for the XT60 and SMA…
- Pobrania
- 706
- Polubienia
- 20
- Ocena
- 0
P
Printablesunpaved studio
DJI O3 GPRC Mark 4 Upgrade with Antenna, GPS and Crossfire Holder
Hey there, I have created this model to upgrade my GPRC Mark 4 frame with the new DJI O3 air unit. I have made 2 Version: Version 1 with DJI O3, antenna and GPS mount: The bottom left and right part to hold the DJI O3 Air Unit in place.…
- Pobrania
- 650
- Polubienia
- 37
- Ocena
- 0
P
PrintablesRadmuffins
Enclosure for AgOpenGPS PCBv4.xSTD v4
Enclosure for PCBv4.xSTD for AgOpenGPS. Enclosure has 2 removable sides, PCB can be inserted from both. This version is fully 3d printable. You can choose from many face and back plates available. But F9P users can only connect antenna…
- Pobrania
- 639
- Polubienia
- 12
- Ocena
- 0
P
PrintablesFlaszynski
GEPRC Cinebot30 GPS mount
Hi, I've made remix existing Geprc GPS mount and fit it to use with GEPRC Cinebot30. You can use it with two antenas RX and VTX. Best to print from TPU or other flexible filament.
- Pobrania
- 629
- Polubienia
- 29
- Ocena
- 4,5
P
PrintablesAlex
GEPRC Cinelog 30 v3 GPS Mount for 121 GPS (12mm) Cinelog30 Cinelog30v3
I used canopy model from GrabCad and tinkered simple mount for GPS. I used black PETG till layer 86, paused, changed filament to TPU, reduced temperature and printer the upper part with it. Came out nicely. But it can be fully printed…
- Pobrania
- 620
- Polubienia
- 28
- Ocena
- 0
P
PrintablesHD_Creator
Meshtastic Heltec V3 housing with space for GPS and battery
Usecase Meshtastic is a open source community project that aims to provide a off-grid, decentralized, mesh network that runs on affordable, low-power devices. https://meshtastic.org/ This design offers a snap-housing for one of the…
- Pobrania
- 607
- Polubienia
- 82
- Ocena
- 5
P
PrintablesVoltaic Enclosures
Meshtastic Vehicle Utility Node Enclosure for LoRa - Supports GPS and a Wide Voltage Input
This is a water resistant compact enclosure designed for RAK Wireless baseboards (RAK19007 and RAK19003). Use it in your car, under your roof eave, or use it for quick deployment situations. ---------------------- Buy it pre-built and…
- Pobrania
- 596
- Polubienia
- 175
- Ocena
- 5
P
PrintablesFAB1150
TTGO T-Beam V1.1 case for big GPS antenna
This is a remix of tpatrickwalsh's TTGO T-beam v1.1 (and v1.0) case ( https://www.thingiverse.com/thing:4753247 ), modified to fit the bigger GPS antennas for better reception. I have found that the bigger antenna is a must, as the…
- Pobrania
- 586
- Polubienia
- 49
- Ocena
- 4,8
P
PrintablesClint J.
SpeedyBee Mario 5 GPS Mount for BZ-181
This part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting a GPS module on a SpeedyBee Mario 5 frame. If anyone knows what filament SpeedyBee actually uses for their yellow parts please…
- Pobrania
- 535
- Polubienia
- 27
- Ocena
- 0
P
PrintablesLWC
Meshtastic FakeTAK "Commander" Tacticool big boi water Resistant, RUGGED, ATAK, GPS, outdoor node
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
- Pobrania
- 522
- Polubienia
- 121
- Ocena
- 5
P
PrintablesIllia Leoshko
Heltec LoRa32 V3 Meshtastic Case with Encoder/Buzzer/Vibro/GPS/Environment sensor/Belt clip/M5Stack CardKB Keyboard-ready
Printing Recommendations: Use adaptive layer heights (up to 0.2mm max) for optimal surface quality and faster print times. Tree supports recommended for clean and easy support removal. Components: Heltec LoRa32 V3 NEO-6M GPS Module…
- Pobrania
- 513
- Polubienia
- 120
- Ocena
- 4,67
P
PrintablesGleb Mayorov
Compact case for Heltec v4 GPS Meshtastic node
Description Compact printed case for Heltec V4 Meshtastic client with GPS. External dimensions are 74x44x21.7mm. This case meant to be used with this default Heltec V4 GPS set: Required BOM 803048 Li-Po battery (consider buying with…
- Pobrania
- 448
- Polubienia
- 52
- Ocena
- 5
P
Printablesps915
ImpulseRC APEX Antenna Mount + GPS (M8N) + Crossfire
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
- Pobrania
- 443
- Polubienia
- 18
- Ocena
- 0
P
PrintablesNordfpv
GEPRC Mark5 Dual-SMA and GPS holder
A replacement part to add 2 SMA connectors to the Mark5 together with a GEPRC GPS (M8 and M10) Everything is pretty tight but it fits. Print in TPU. A well tuned machine can print it without supports.
- Pobrania
- 437
- Polubienia
- 27
- Ocena
- 0
P
PrintablesLoopFPV
Speedybee Mario 5 Dual Antenna GPS WS-M181 XT60
Hey FPV Guys, it's a ugly quick'n'dirty combination of different Things. For the Speedybee Mario5 Frame: - WS Dual Antenna - XT60 Mountable Plug Connector - WS M181 GPS Print with TPU Infill 15% and Organic support
- Pobrania
- 427
- Polubienia
- 30
- Ocena
- 0
P
PrintablesGt6k
Improved Garmin GPS mount - USB type for Skoda Citigo, VW Up and SEAT Mi
This is version 2 of the Garmin GPS mount for the later type fitting in the 2017 Citigo, Up and Mi which have a USB socket under the base. The neck has as a 17.4mm radius ball to match the standard socket on Garmin GPS brackets. It should…
- Pobrania
- 408
- Polubienia
- 41
- Ocena
- 4,5
P
PrintablesJ4DP
TPU DJI O4 Antenna + 21mm GPS Mount for Speedy Bee Mario 5
This is my attempt at making the new DJI O4 Air Unit compatible with the SpeedyBee Mario 5 frame and an HGLRC M100-5883 GPS module. The mount should also fit a variety of 21mm GPS modules, though I haven’t tested it with others. It must…
- Pobrania
- 384
- Polubienia
- 18
- Ocena
- 5
P
PrintablesIvan Ignáth
Heltec V4 case with GPS, 18650 and switch
Case for Heltec LoRa32 V4 - https://www.aliexpress.com/item/1005010609328381.html GPS module simple antenna 18650 battery (soldered leads) mini slide switch https://www.aliexpress.com/item/1005005508763350.html Inspired by…
- Pobrania
- 372
- Polubienia
- 48
- Ocena
- 5
P
PrintablesPlomek
Dual antenna, gps and elrs mount for Mark4 V2 frame
This is a dual-antenna, GPS and 2.4GHz elrs antenna mount designed for the 7/8/9/10inch Mark4 V2 frame. Antenna used: Foxeer Lollipop V4 Gps used: HGLRC M100, It may also be compatible with other GPS modules. The mount is ideal for…
- Pobrania
- 365
- Polubienia
- 10
- Ocena
- 0
P
PrintablesCody Tolene
Flipper Zero - Minimalist WiFi Dev Board Case (Antenna + GPS + SD)
A minimalistic 3D printable case for the Flipper Zero Wi-Fi Dev Board . There are two variations of this case, a larger XL version and a normal size MD version. The XL version has a larger under-cavity for addons such as a GPS module. The…
- Pobrania
- 356
- Polubienia
- 44
- Ocena
- 5
P
PrintablesSimple3D
Case for Heltec T114 V2 Meshtastic Radio with GPS and two 3000mAh Lipo batteries
I wanted a Heltec T114 V2 meshtastic radio case that would fit with the GPS module. I didn't see any. I also wanted one that would hold two of the larger 3000mAh Lipo batteries. I made it to snap together so no hardware would be required.…
- Pobrania
- 354
- Polubienia
- 47
- Ocena
- 5
P
PrintablesNordfpv
GEPRC Mark5 GPS and SMA mount
A mount for GEPRC M8 GPS and a regular SMA connector for the Mark5. I believe other GPS like the BN220 will fit but I have not tested it. Everything sit very tight but it works as this model is intended to be printed in TPU. Print with…
- Pobrania
- 350
- Polubienia
- 17
- Ocena
- 0
P
PrintablesVitaliy Lymar
Mount Foxeer M10Q-250 GPS module for Mark 4
Foxeer M10Q-250 GPS module for quadcopter frame GEPRC Mark 4.
- Pobrania
- 346
- Polubienia
- 19
- Ocena
- 4
P
PrintablesNameOfTheDragon
SpeedyBee Mario 5 XT60-SMA-GPS
Print with supports on build-plate only. I found a brim helps to keep it on the build plate.
- Pobrania
- 346
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDL
FPV Apex Frame GPS and Antenna Mount
simple mount for antenna mount for GPS on top
- Pobrania
- 340
- Polubienia
- 16
- Ocena
- 0
P
PrintablesMazigazi
GOKU GM10 Pro V3 GPS holder for iFlight Chimera 7 Pro V2
A GOKU GM10 Pro V3 GPS holder that fits the original parts of iFlight Chimera 7 Pro V2 backend. It is designed so that the GPS can be slid into the holder although it's a tight fit. Also has a lip on the top for extra protection. Print in…
- Pobrania
- 337
- Polubienia
- 15
- Ocena
- 0
P
PrintablesPunsiPuny
Faketec V4 case Meshtastic MeshPhone with GPS and Oled
Updates Added a new front part version that fits the (NEW) 0.96" OLED , since the old version was designed for the original OLED size. Thank you @JLO_2137313 for the feedback! Added a version that fits 18650 batteries . It’s a bit…
- Pobrania
- 334
- Polubienia
- 50
- Ocena
- 5
P
PrintablesBooomit
HGLRC M100 GPS Mount
A simple mount for the HGLRC M100 GPS module. Versions: - Plain - Flightory Mini Plank Hatch fitted
- Pobrania
- 332
- Polubienia
- 19
- Ocena
- 5
P
PrintablesTimurey
Faketec nrf52 Meshtastic Case with Encoder/Buzzer/GPS/Environment sensor, M5Stack CardKB Keyboard-ready
09.02.2026 Update: add new Front part with new necenano support, which uses low-profile USB-C connector. 18.02.2024 Update: add Base.stl file and upgraded step file In relation to the original model: - the profile of the adjoining surface…
- Pobrania
- 329
- Polubienia
- 55
- Ocena
- 5
P
Printablesdoppiozero
GPS - Ublox NEO 6M case
External dimensions of NEO 6M gps 25.7x36.5mm Bottom part is transparent to see status LEDs. Screw M3x10 ISO 7046 2pcs Screw M3x6 ISO 7046 2pcs Average print time: 50min Print Settings Printer: Hephestos2 Rafts: No Supports: No…
- Pobrania
- 327
- Polubienia
- 18
- Ocena
- 5
P
Printablespkrolik
iflight nazgul xl5 v5 mount crossfire buzzer gps antenna
nazgul xl5 mount crossfire buzzer gps PS. Mogę wydrukować i wysłać na terenie Polski.
- Pobrania
- 324
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMarcalot
Cinebot30 M8.2 & M10 GPS and Antenna holder
I used Sainsmart TPU with some supports in the right places (paint on supports) - easily removable. The second model uploaded is for the M10 GPU and I've updated the model for easy antenna Install / removal. I made a cut at the back of…
- Pobrania
- 324
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMichal Novotný
Apex 5 gps mount
Rear mount for HGLRC M100-5883, VTX and ELRS antenna. Printed without supports.
- Pobrania
- 322
- Polubienia
- 15
- Ocena
- 0
P
PrintablesAdventure Mike
Kove 450 Rally GPS / Tablet/ CarPlay C7 / GoPro Mount Upper and lower mounting points RAM Ball
This is a tablet mount for the Kove 450 Rally (Non pro version) that can be 3D printed. I am mounting a Samsung Tab A7 Lite in a rugged case with it in the lower position or an AMPS bolt pattern RAM Ball with a Garmin GPS or a Motorcycle…
- Pobrania
- 320
- Polubienia
- 11
- Ocena
- 5
P
Printablesadityakamath
GPS module (gy-neo6mv2) holder
Updated the original part to fit my GPS module. It might not work for every single module since different manufacturers sell the same part with different dimensions. Feel free to update the attached .f3d file.
- Pobrania
- 313
- Polubienia
- 11
- Ocena
- 0
P
PrintablesDtmpts
Bunnings Paint Pole to GPS thread for surveyors
Converter that fits Australian painters pole thread to a standard 5/8th 11 thread used by surveying equipment. A painters pole is a cheap alternative for extending your radio aerial nice and high. Print instructions I have had success…
- Pobrania
- 309
- Polubienia
- 15
- Ocena
- 5
P
PrintablesMihăiţă Bişog
FlyFishRC M10 Mini GPS Reference Model and Reference GPS Holder
Some time ago I got one of these mini GPS units to put on my quad after I lost the previous GPS unit in a crash. Turns out this unit is quite decent and, comparatively, pretty cheap so I'm quite happy with it. One problematic thing was…
- Pobrania
- 308
- Polubienia
- 9
- Ocena
- 0
P
Printablesmassis
Segway Navimow GPS mount
Mount for a Segway Navimow GPS antenna, made to fit on a standard 90mm wood beam as I wanted to mount mine up on top of our pergola in the backyard.
- Pobrania
- 308
- Polubienia
- 20
- Ocena
- 0
P
PrintablesPhil
iFlight / HSKRC XL5 XL6 XL7 XL8 XL9 GPS BN-880 VTx Antenna and Crossfire Antenna Mount
Tested on my HSKRC XL Frame (XL9 Arms), which is very close to the iFlight XL7. Standoffs in my case are 5mm (which could differ from the iFlight model), so the holes are tailored to that size. I added a TBS crossfire antenna holder to…
- Pobrania
- 306
- Polubienia
- 10
- Ocena
- 0
P
PrintablesÁlvaro García
Soporte GPS
Modelo de soporte gps FPV, inicialmente para Frame geprc Mark4 pero funcional para varios modelos mas, el primero es para uso único del soporte, el que viene con “+ armour” es para usarlo con el cover del frame.
- Pobrania
- 305
- Polubienia
- 22
- Ocena
- 3
P
PrintablesCalRal
Speedybee Mario 5 - Dual Antenna - XT60 (NO GPS)
Thanks to LoopFPV. Great TinkerCAD model that took less than a minute to make exactly what I wanted. FYI: The Hatchbox TPU does NOT match the yellow of the factory TPU parts. Printer brand: Creality Printer: Ender 3 Pro Supports: Yes…
- Pobrania
- 300
- Polubienia
- 24
- Ocena
- 5
P
PrintablesVoxel3D_NL
GEPRC MK5D (Mark5) M10 GPS mount for DJI O3 / ELRS
I wanted to mount the HLGRC M100-5883 10th-gen GPS module to my GEPRC MK5D frame (Deadcat version). I could not find any mounts that use the stock antenna mounts, allowing for easy ELRS antenna and DJI O3 antenna fitting. Therefore I made…
- Pobrania
- 300
- Polubienia
- 12
- Ocena
- 5
P
Printablespkrolik
22mm GPS mount for SpeedyBee Master 5 V2
22mm GPS mount for SpeedyBee Master 5 V2
- Pobrania
- 297
- Polubienia
- 12
- Ocena
- 0
P
PrintablesDjiM
GPS and antenna mount for FPV drone (optional XT60e)
Backpack module for 5" FPV quadcopters. Please do verify the dimensions of your quadcopter: backpack is 20mm high. Check that your frame has at least this height. mounting points are separated by 24mm (measured center-to-center) mounting…
- Pobrania
- 292
- Polubienia
- 15
- Ocena
- 0
P
PrintablesLaho
25mm GPS mount for SpeedyBee Master 5 V2
A GPS mount for the speedybee Master 5 V2. Print it in TPU with 20% infill.
- Pobrania
- 289
- Polubienia
- 9
- Ocena
- 5
P
PrintablesZan Hecht
Threaded nut for GPS/Phone Mount
The nut ID is 0.8", OD (not including wings) is 1.2", and height is just under 0.5". Thread is a slightly oversized 15/16"-12 (12 threads per inch). Original nut was ABS. Category: Replacement Parts
- Pobrania
- 288
- Polubienia
- 17
- Ocena
- 0
P
PrintablesSzymon Szpularz
Volador VX5 T700 GPS Mount HGLRC M100 5883 and other
GPS mount for FlyFish Volador VX5 for the original antenna mount, compatible with all GPS units with dimensions of 21x21mm. No screws are required to mount the module. Print settings: Material - TPU Infill - 50% Walls - 3
- Pobrania
- 285
- Polubienia
- 17
- Ocena
- 0
P
PrintablesDaniel
F405 wing support+gps Speedybee
I used PETG, 15 % infill, 0.2 Quality Standard. M3 + nuts. Print with support. F405 and GPS were getting hot, so I left holes and space for air to flow. 4 x M3x8 + nuts 2 x M3x8 + nuts
- Pobrania
- 283
- Polubienia
- 18
- Ocena
- 0
P
PrintablesRandy
Cinelog30 v3 GPS 25x25x8.2
Cinelog30 v3 GPS GEPRC M10 mount 25x25x8.2
- Pobrania
- 283
- Polubienia
- 11
- Ocena
- 5
P
Printableslachtan86
GEPRC CineLog35 V2 GPS mount
Hey! GEPRC CineLog35 V2 GPS mount. GPS module is used Bainianxing-BU1025TF with UBX-M10050-KB + Flash Memory, supports GPS, Glonass, Galileo, BeiDou at same time. GPS module buy here edit 31.3.2023 v1.2 - added Walksnail and some minor…
- Pobrania
- 282
- Polubienia
- 8
- Ocena
- 0
P
Printablesideenwerk.me
TTGO/TBeam 1.1 case with loop for paracord/carabiner (and big GPS-antenna)
may be used with rdzsonde, meshtastic and others while hiking, to fix it securely to the vest/belt/backpack.
- Pobrania
- 280
- Polubienia
- 24
- Ocena
- 5
P
Printablescoreboot
Volador VX3/VX3.5 Walksnail WS-M181 front GPS mount
Print Settings Printer brand: Kingroon Printer: Kingroon KP3S Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament material: TPU Filament brand: Kingroon
- Pobrania
- 279
- Polubienia
- 10
- Ocena
- 0
P
Printablesadammelancon
USB Dongle Monitor Clip for WiFi, RTL-SDR, GPS, etc...
Can hold USB dongles such as an Alfa Wifi adapter, or an RTL-SDR adapter to the back of your laptop screen. It's pretty universal, although the part that clips onto the monitor is designed for my Framework laptop. Fusion 360 Link:…
- Pobrania
- 278
- Polubienia
- 51
- Ocena
- 4,33
P
PrintablesMatt H
Mark5 FPV Front GPS Mount Plate TPU - BZ-251
This mount is designed to securely position a BZ-251 GPS on the front of the Mark 5 FPV frame. It offers an optimal GPS placement, provided you are not using an action camera . The front of the mount fits snugly against the connector to…
- Pobrania
- 276
- Polubienia
- 8
- Ocena
- 0
P
PrintablesLWC
Meshtastic "FakeCAP" ultra Slim NRF52 GPS node
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
- Pobrania
- 275
- Polubienia
- 64
- Ocena
- 5
P
PrintablesDmytro
HGLRC M100 GPS zip tie mount
HGLRC M100-5883 GPS zip tie mount for a FPV frame. This model is designed to fit securely on the top plate of the GepRC Mark4 7" drone frame. Recommended Print Settings: Material: TPU or ELASTAN (TPU 95A used in this case) Infill: 20%…
- Pobrania
- 272
- Polubienia
- 10
- Ocena
- 0
P
PrintablesSoulta
GPS Antenna Collar-Clip for Tracker/Garmin/Ultracom
This is meant to be a replacement fr the Antenna clip that is usually shipped with Collarmounted Dog tracking GPS (i.e. Tracker, Garmin or Ultracom Collars). Since they usually break early in the products life i decided to print a sturdy…
- Pobrania
- 271
- Polubienia
- 8
- Ocena
- 0
P
Printables406FPV
Flywoo GM10 nano gps mount
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20mm standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex tpu.If…
- Pobrania
- 270
- Polubienia
- 12
- Ocena
- 5
P
PrintablesAlex
SpeedyBee Mario 5 GPS Mount for 15x15mm GPS module such as HGLRC M100 MINI
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 15x15 mm HGLRC M100-MINI GPS module on a SpeedyBee Mario 5 frame.
- Pobrania
- 269
- Polubienia
- 20
- Ocena
- 5
P
PrintablesBen Blackburn
DJI Avata GPS Upper
Replacement upper cover for the DJI Avata's GPS module. Requirements: 0.25mm nozzle required Very small features that interface with clips that will not print with standard nozzle. Soldering iron or similar Clear piece for LED uses…
- Pobrania
- 269
- Polubienia
- 26
- Ocena
- 5
P
PrintablesOctfx
SpeedyBee Mario 5 Foxeer M10Q 180 GPS Mount
Remixed SpeedyBee Mario 5 GPS Mount for the Foxeer M10Q 180 GPS
- Pobrania
- 268
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDrew
H1+ Heltec V4 with GPS, colorful edition
Muzi Works has a great assembly document in their website for putting this thing together, the PDF attached is directly from them and it is an excellent writeup. For Bambulab files, please download off of Makerworld…
- Pobrania
- 265
- Polubienia
- 22
- Ocena
- 0
P
PrintablesMarcalot
Cinebot 30 Flywoo GM10 mini v3 GPS / DJI 03 Antenna holder
Original Antenna mount by "lukaskroll" on Thingiverse. I have modified one of his models to accommodate the GM10 Mini v3 GPS.
- Pobrania
- 263
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLWC
LWC Meshtastic "BEACON" rugged, waterproof** GPS outdoor node
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
- Pobrania
- 256
- Polubienia
- 133
- Ocena
- 0
P
PrintablesWeirdCan
GEPRC Mark4 GPS front mount for TBS M8-2
Even if a GEPRC Mark 4 HD isn't a long range quad, a GPS may come in handy. Either as a fail safe or as a speedmeter. I couldn't find a mount for the front of the quad so I made one from scratch. There are two designs. One for the factory…
- Pobrania
- 255
- Polubienia
- 20
- Ocena
- 5
P
PrintablesFrancois Rainville
Canyon CP0018 GPS mount
Strong Mount for your Canyon Ultimate with CP0018 integrated cockpit. Tested on : 2023 Canyon Ultimate CF SL 2022 Canyon Grail CF SL You will need : - A Trigo TRP1815 for garmin aliexpress Link :…
- Pobrania
- 253
- Polubienia
- 24
- Ocena
- 4
P
PrintablesBoy Sandy G. A.
Speedybee Mario 5 - XT60 - 18mm GPS - 2 SMA Antenna
It is a Speedybee Mario 5 TPU design which has XT60 slot, 18mm GPS, and 2 SMA antenna
- Pobrania
- 253
- Polubienia
- 11
- Ocena
- 0
P
PrintablesOlivier Cassignac
H1 iv Case for Heltec V4 + GPS (Modified Muzi Works H1)
The remix by @tehspiah works great with Heltecv4. As I'm using the official GPS, I needed to fit the GPS in so I added a little cavity in the TOP part.
- Pobrania
- 252
- Polubienia
- 21
- Ocena
- 0
P
PrintablesflyOnMap
FPV SpeedyBee Mario 5 Custom TPU for XT60, Iflight GPS, 2 x SMA and vertikal ELRS Antenna
FPV SpeedyBee Mario 5 Custom TPU with follow parts: XT60 iFlight BLITZ M10 GPS V2 2 x SMA vertikal ELRS Antenna mount Short Video about this model you can find hier:
- Pobrania
- 252
- Polubienia
- 6
- Ocena
- 0
P
Printablesink
H2T - Case for Heltec T114 with screen protector and GPS
I bought a amazon kit - Mesh Node T114 with screen protector & GPS-Modul & 950mAh Akku, nRF52840 MCU SX1262 LoRa-Chip https://www.amazon.de/dp/B0F65D568Z (non referal) I modified the muzi.work H2T Remix case by NextGen, so that a Heltec…
- Pobrania
- 251
- Polubienia
- 28
- Ocena
- 4
P
PrintablesMr. Poke
AgOpenGPS steer gear
https://aliexpress.com/item/1005003981684365.html 2024. 08. 19. Add motor_gear12-4x4 steering_gearMTZ_NEW
- Pobrania
- 251
- Polubienia
- 12
- Ocena
- 0