Wyniki wyszukiwania: heater

Sortowanie

1091 modeli

P
PrintablesPython-1

60 degrees heater bed cable cover

Less stress on the wiring and more gap for twisting than shorter model. Slightly longer (9mm) but less prone to insulation melting. Modified from original Prusa model files. Use with original clip

Pobrania
1096
Polubienia
147
Ocena
4,93
P
Printablesfifindr

Heater Bleeder

Use 3 walls and tree supports on build plate only for water catcher. A simple tool that makes bleeding radiators cleaner and more convenient by catching the water released from the bleed valve. The design consists of two parts : A…

Pobrania
787
Polubienia
331
Ocena
5
P
PrintablesKrennW

Code for Heater with AutoOff, AutoHum, Second Sensor, Fan-Control, LED-Control, Color Labeld Display. Bracket X with place for second and third Mosfet

The files are made for a MMU3 (here with MK4) Whereas the Chars (I|O, + and -) are changeable Also the used Extruder, here Main (Display 1) = 3, I|O, + and - = 1 Bracket X for place for two additional mosfet (fan and Led strip) There is…

Pobrania
119
Polubienia
25
Ocena
5
P
Printablesecsv

Wemos D1 Mini Heater fan controller

There is a large list of radiator fan mounting models Alvomane's Radiator Booster UppsalaHenrik's 2x92mm fan ducts for radiator djtifosi' Radiator Blower Fan with magnetic holder simlrh's Radiator Fan schranzistor's Radiator amplifier…

Pobrania
117
Polubienia
40
Ocena
4
P
PrintablesWaffleStaffel

Diesel Heater 5kW-8kW air intake guard

Spliced together Silver_Surfer234 's 2kw intake screen and Schaffer.la 's linear drain screen to make a less restrictive screen, increasing the air flow by approximately 20% or more. This is especially helpful when you have extensive…

Pobrania
85
Polubienia
15
Ocena
5
P
PrintablesDan

Camper RV Water Heater Drain Plug Wrench

This is a tool to tighten or loosen a travel trailer camper hot water heater drain plug. Works with 1 1/8" hex head drain plugs. When printing, be sure to have extra thick walls. I used PETg with 10 layers of thickness on the walls giving…

Pobrania
75
Polubienia
13
Ocena
0
P
PrintablesFokieH

Gehaeuse Heizung / Enclosure Heater

UPDATE 12.11.2024: (Keine Änderungen an Bauteilen / No changes on part design) Ich Empfehle die Löcher für die M3 Gewinde aufzubohren und Messing Gewinde einzuschmelzen, dies funktioniert deutlich besser und ist auch viel Robuster / I…

Pobrania
68
Polubienia
22
Ocena
5
P
PrintablesColicab

Shaft (rod) for Junkers boiler/gas heater knob

Cut whole or rest of original shaft, drill 5mm hole with 3mm diameter and insert rod. Shaft is cut so carefully insert to match old values, e.g. on 0. Designed to be little loose in order to easy future removal. Tested in PLA and PET.…

Pobrania
61
Polubienia
3
Ocena
0
P
Printablesjrsone

Nikon Z 14-24mm lens focus clamp / dew heater

This clamp mechanism is meant to lock the focus on the Nikon Nikkor Z 14-24mm f/2.8 lens, and integrates two polyimide heater strips to prevent dew/frost from collecting on the lens during astrophotography. This is better than the typical…

Pobrania
28
Polubienia
9
Ocena
0
P
PrintablesLeskar Ta Tiz

Cat fingersaver for heaters

Please, print only in heat resistant materials, PETG or above. Super please, check dimensions, I have added pictures so you can do this easier. This piece is meant to avoid MochiZapata and NaraKnope safe, as they like to play and run over…

Pobrania
25
Polubienia
4
Ocena
0
P
PrintablesLucianociri

Soportes fijos para partantes satelites home theater

Los imprimí en PLA con relleno 100% para mejorar la resistencia.

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesJed LaRue

Theater Chair Mug platform

Theater Chair Mug Platform I made this so we could use our theater chair cup holders for Mugs with handles.

Pobrania
10
Polubienia
2
Ocena
0
P
PrintablesReviloRedab

Chopstick Cheaters (not just) for the kids

ChopstickCheaters to let your kids eat with chopsticks. Easy and fast print and a lot of fun! V2 now prints with no supports. Use PETG to be able to put them in the dishwasher. PLA works fine but may not stand the heat. Made for…

Pobrania
6672
Polubienia
2904
Ocena
4,84
P
PrintablesIBNobody

MK4 Nextruder Nozzle Change Heater Block Clamp

Background As many of you have found, it is easier to swap MK4 Nextruder nozzles in-place rather than to disconnect and swap out the entire heater block. Problem In-Place Nozzle Swaps pose some amount of risk in that you have to hold onto…

Pobrania
4234
Polubienia
1027
Ocena
4,98
P
PrintablesMrViddy

Chopstick Cheaters Helpers Trainers

Inspired by the design from FUN CHOP chopstick helpers. Great for rounded chop sticks as well. Recommend Print in PETG for flex and strength. Recommend 100% Infill FunChop chopstick Helpers (Amazon Link⬇) https://a.co/d/1i6oWUr

Pobrania
2460
Polubienia
460
Ocena
4,95
P
PrintablesNoizie Works

Qidi Plus 4 chamber heater shell replacement

UPDATE: I have replaced the files with STEP so it's easier to remix as QIDI changed up the mounting locations and i don't have acces to this data. Attempt this fix at your own discretion! Only work on the heater with the power off and the…

Pobrania
1099
Polubienia
217
Ocena
4,67

Thumper and Morrigan "Cheater" metal gear transmissions

!!!!!! It has come to my attention that not all 40T gears are the same. Some have a much bigger shoulder and are much thicker. I got mine on Amazon. link below. The wrong 40T has an option of a shaft up to 15mm, The cheaper version only…

Pobrania
978
Polubienia
134
Ocena
5
P
Printablescothyh

TZ V2 Hotend (Bambulab Hotend Derivative) CAD with sock and heater

Cut out the sock and heater from Said's model and pasted onto this version

Pobrania
944
Polubienia
59
Ocena
5
P
PrintablesKeram

TZ E3 V2 Hotend (Bambulab Hotend Derivative) CAD with sock and heater

Heatsink was completely reworked, collets were remade as close to original as possible. Since provided model was fused into one solid, E3 Collet is rough estimation according to drawings/photos. CAD is accurate to provided technical…

Pobrania
896
Polubienia
73
Ocena
5
P
PrintablesFruntke

V2 - UPDATE: TRUMA Heater Airflow Deflector for Motorhome – 360° Adjustable Direction

UPDATE: V2 Da die vorherige erste Version nach Benutzung und anschließender Fahrt mit dem Wohnwagen immer wieder herausfiel oder sich sehr leicht lösen ließ, habe ich mich dazu entschlossen das Teil so zu modifizieren, dass es nun in die…

Pobrania
825
Polubienia
56
Ocena
5
P
PrintablesWürth

Würth T-bleed key for Heaters

T-Bleed key for Heaters The Würth Air Bleeder Tool is designed to facilitate the removal of air from the heaters/radiator, which is essential for maintaining heatrer efficiency and preventing potential loss of heating capacity due to…

Pobrania
815
Polubienia
146
Ocena
4,82
P
PrintablesFunkyArt

Heater bleeder (Heizungsentlüfter)

It is again the time to throw the heaters on, also the time to bleed the heaters. I have already printed something similar some years ago but unfortunately no longer found therefore I have tinkered a new one. No support needed, just part…

Pobrania
783
Polubienia
181
Ocena
4,83
P
PrintablesHawwwran

Better Bathroom radiator heater towel hook hanger

Simple and stable hanger hook. Click fits Stays tightly on place 2cm rail diameter Print instructions PETG is the best, but PLA works great as well. 0.3mm layer height is just fine.

Pobrania
766
Polubienia
115
Ocena
4,86
P
PrintablesMyco Dogs

Induction Coil Heater/Sterilizer

Print flat sides down no supports. To use, plug into 12v 10amp power supply. Insert tool into coil and hold down the button until it glows, this usually takes a few seconds. Assembly instructions: Insert both the button and the power…

Pobrania
734
Polubienia
46
Ocena
0
P
PrintablesAllTheHobbies

Sovol SV06 Bed Heater Cord Support

Relieve rubbing of the cord on the table, corner and frame. Keep cord parallel to the bed movement. Presses onto cord no fastening required.

Pobrania
731
Polubienia
104
Ocena
4,89
P
PrintablesOneTwo

Anycubic Kobra S1 Fan duct (almost 360°) for upgraded hotends with ceramic heater (not for stock)

Was looking for a good fan duct with 360° cooling and good nozzle visibility of Kobra S1 and decided to make this one for upgraded hotends (with ceramic heater). The model is easy to print with or without supports (up to you). Please…

Pobrania
711
Polubienia
106
Ocena
3

NexGen3D: Chamber Heater

Im proud to release the version 1 of my universal chamber heater, the control system and power setup will be up to you, I will add these details later on the next version. BOM: 1 x 24v 7530 Dual Ball Bearing GDStime Blower Fan…

Pobrania
621
Polubienia
313
Ocena
5
P
PrintablesDarkSunShine

Opel Astra H Heater Mix Flap (Mischklappe ) repair adapter (2004-2010)

How to diagnose a failed heater flap: There is no hot air blowing from the HVAC in the Astra, First checked the coolant in the engine, if there is none, you might have a bigger problem. Check if the the mix flap solenoid is working by…

Pobrania
608
Polubienia
21
Ocena
0
P
Printablesosirisad

Ford 2.0L Heater Hose Disconnect Tool

You can buy this model printed in PETG along with the needed gaskets so you don't have to buy a 50 pack, message me! Disconnects the Heater Hose Fittings on 2012-2018 Ford Focus 2.0L and 2013-2016 Ford Escape 2.0L Eco Boost. This video…

Pobrania
579
Polubienia
24
Ocena
5
P
Printableszemlin

Creality K2 Plus Chamber Heater Recirc Mod

Updated - On my second K2 the 90mm fan spacer interfered a bit with the purge chute, so I opened up the clearances around that a bit more. It wasn't sitting right on the can and got pushed in enough to interfere with the blades and cause…

Pobrania
569
Polubienia
121
Ocena
5
P
Printablesjmynheir

Seatbelt Cheater Ford Focus

Seatbelt cheater designed for a 2010 Ford Focus. For all legal purposes, or whatever, I'm not your mom. Category: Vehicles

Pobrania
564
Polubienia
31
Ocena
0
P
PrintablesPugwash

Diesel Heater Control Panel Wall Mount

This is a replacement wall mount plate for the control panel of the popular Chinese diesel heaters, as used in many self-built motorhomes. It clips the control panel into place the same as the original mount using the same screw…

Pobrania
523
Polubienia
61
Ocena
5
P

Qidi Plus 4 Safer Chamber Heater [Updated]

Remix of Noizie Works awesome chamber heater shell replacement, with several design improvements. He has given me his blessings to remix the hell out of this. Removed previous thermocoupler wire path. Added through barrier wire path.…

Pobrania
513
Polubienia
119
Ocena
5
P
PrintablesKraemer

EcoFlow WAVE 2 Portable Air Conditioner with Heater Exhaust duct connectors

Fits EcoFlow WAVE 2 Portable Air Conditioner with Heater exhaust ducts E and D. It is hard to cut a perfect circle, so print these, screw and/or glue it to the board for a perfect fit. Cut the board to the size of your window and put some…

Pobrania
487
Polubienia
30
Ocena
5
P
PrintablesNolson 8

Diesel Heater Tent Vent

HARDWARE NEEDED: 4 x m5 heated inserts 4 x m5x12 screws 4 x m3 heated inserts 4 x m3x8 screws PRINT SETTINGS: Base: Infill: 20% Walls: 3 Support: Yes, Normal (manual) Tube: Infill: 20% Walls: 4 Support: Yes, Tree (auto) Controller Mount:…

Pobrania
467
Polubienia
38
Ocena
5
P
PrintablesHawwwran

Symmetric Rail / Panel heater hook hanger

Dead simple but very useful symmetric hook hanger. Hang it on bathroom rail heater. It click fits! It stops on the bars under the one you hang it on (stops wiggling). Hang it on the panel heater. It fits in the top holes. Useful to hang…

Pobrania
459
Polubienia
54
Ocena
5
P
PrintablesNodashi

Diesel Heater Legs

Simple model to elevate the diesel heater so the exhaust pipe does not come in contact with anything. This is for the tall and slim all in one models. I used 4 M5 screws that thread into the plastic foot. But if you have a screw long…

Pobrania
457
Polubienia
63
Ocena
5
P
Printablesprouting

Puller Nozzle Heater and Thermistor Connector Elegoo Centauri Carbon -Updated16Feb26-

Tool for remove the XH 2pin connector nozzle heater of centauri carbon Updated (16Feb26): Added New puller for ZH 2pin with printed spring. Updated (15Jan26): Added New puller for XH 2pin with printed spring. This version prevents the…

Pobrania
450
Polubienia
77
Ocena
5
P

Panda Breath Heater Mount for Snapmaker U1

I recommend printing from PETG CF, better from PA CF. Attention - the upper elements must be compressed. The special feature of the mount is that you can quickly remove and put back the heater.

Pobrania
438
Polubienia
80
Ocena
5
P
PrintablesKutilman Yuri

Radiator degassing / Heater venting drain tool

Radiators/water heaters should be degassed before the heating season to increase efficiency of the heating and prevent issues. Every time I used a cup or almost anything to vent the radiators I got water on the floor or on the wall.…

Pobrania
437
Polubienia
180
Ocena
5
P
PrintablesFleeeinIan3D

Centauri Carbon 7.5 mm Panel Spacer with Wire Relief for Chamber Heater (Creality)

Before you print, please read everything below carefully... What: Based off of SE3Ds 7.5 mm panel spacer, I modified one of the lower pieces to have two wire relief holes to be able to route a creality chamber heater inside the printer.…

Pobrania
426
Polubienia
61
Ocena
4,92
P
PrintablesE3D

Connector clips for HeaterCore wiring

MODEL DETAILS Connector clips for the joint of your wiring where the HeaterCore and extension cables meet. This is not a mandatory part of the installation. You will need 4x cable ties. RECOMMENDED PRINT SETTINGS No support material is…

Pobrania
403
Polubienia
66
Ocena
4,67
P
Printablesgam3fr33k

Tragedy and Comedy Theater Masks

Remixed model to lay flat for wall mounting.

Pobrania
395
Polubienia
24
Ocena
0

Truma heater vent air splitter

For a 55 mm ID air outlet. You can connect a 22 mm OD hot air pipe to the four outlets and plug them in your wet shoes/boots . Test print with PETG, 0.25 mm layer with supports. It's possibly better to use ABS/ASA but I don't have this…

Pobrania
363
Polubienia
35
Ocena
0
P
PrintablesNoizie Works

Printable PTC heater all-in-one enclosure module

Printed in ABS you can watch more instructions in this video: https://youtu.be/Fi0ZqGbZryw Editor note: I want to add that installing some kind of fuse is gonna be a good idea and if you pass the wire true the metal to use a rubber…

Pobrania
345
Polubienia
122
Ocena
5
P
PrintablesTinker

Resin printer heater

This is a remix of ANYCUBIC MONO X HEATER by JVJV - Thingiverse I found that there was a need for more room inside for cable management, so I have extended the compartment for the thermostat. Text below is copied from the original…

Pobrania
342
Polubienia
95
Ocena
4,67
P
Printablesstew675

Qidi Plus 4 Lengthways Chamber Heater Casing

Replacement Chamber Heater Cover Unit for Qidi Plus 4 Model Update: I've added a revision to the original model that includes a more curved path towards the outlet which slightly improves the overall air-flow. These models will have the…

Pobrania
339
Polubienia
112
Ocena
5
P
PrintablesSabineL

Heater vent key - Heizungsentlüfter-Schlüssel

Needed a quick key to vent my heaters where the skrew driver slit was dead. Works in normal german central water heaters. Used PLA, but PETG would be more stable. Used Prusa Mini+ with 0.4 Nozzle.

Pobrania
336
Polubienia
31
Ocena
4,6
P
PrintablesDLD Design Fab

4 inch 90° RV Heater Duct Elbow

RV 4 inch flex hose repair elbow. This was created to address sharp 90° transitions in RV's like the Forest River Salem Cruise Lite that lead to broken/torn heater flex hose. Under the fridge, a 4 inch flex hose is routed right behind the…

Pobrania
333
Polubienia
28
Ocena
5
P
PrintablesAdrunkleaf

Wago mounts for Honey Badger Bed Heater

These wago holders are used to mount the wagos included in the Honey Badger bed heater installation kit. Use the 412 for 2 port wagos, and the 413 for 3 port. Use standard Voron print settings.

Pobrania
332
Polubienia
42
Ocena
5
P
PrintablesDominik

hook fot towel-heater / Haken für Handtuch-Heizung

This hanger will clamp to the heater and stick. Use the f3d file to adjust all parameter according to your needs. Print Settings Printer Brand: Anycubic Printer: Photon Rafts: Doesn't Matter Supports: No Resolution: 0,02 Infill: 10%…

Pobrania
326
Polubienia
25
Ocena
5
P
PrintablesJeffTH

75mm Diesel Heater Pipe Connector

Use a filament that can withstand the temperatures. ABS works fine.

Pobrania
326
Polubienia
31
Ocena
5
P
PrintablesAndrey Puchkov

Chamber heater for FlashForge 5m

Нагреватель строго рекомендую печатать из термостойкого материала, в идеале не поддерживающего горение. При использовании нагревателя на 200 Вт рекомендую использовать внешнее реле на ток не ниже 20 Ампер Терморегулятор:…

Pobrania
323
Polubienia
157
Ocena
5
P
PrintablesHargoHub

Chopstick Cheaters - 5 Models

These are helpful when someone is still learning how to use chopsticks. Depending on how the chopsticks break, you might need to shave down the wood a bit to make it fit properly Printing notes: The “Basic” Chopstick Cheater in the photo…

Pobrania
313
Polubienia
37
Ocena
0
P
Printableskluiten

Diesel Heater in a Weatherproof Case

These parts were inspired from a design by KeeganBuilds (YouTube). I modeled these parts in OpenSCAD to fit the components from a 2 kW diesel heater kit and have included the .SCAD files below so others can modify to fit heaters with…

Pobrania
308
Polubienia
52
Ocena
5
P
PrintablesEdinSimon

Tentbox Cargo Diesel Heater Adaptor

Adaptor to change the 80mm Dia to one which can be between the zipper. Fusion360 files included.

Pobrania
298
Polubienia
52
Ocena
5
P
PrintablesDenat Studio

Truma E2400 Heater Exhaust Cover D95mm

I had this second hand gas heater, the Truma E2400, but this part was missing and it appears to be smaller in diameter than the spare parts you can buy …. So I designed one (from pictures & measurement of the parts you screw it on) and…

Pobrania
293
Polubienia
20
Ocena
5
P
PrintablesScott Tate

Seat Belt cheater for 2021 Ford Ranger

Seat Belt cheater for 2021 Ford Ranger

Pobrania
280
Polubienia
31
Ocena
5
P
Printablesbartosslajos

Valeo 656134A - C Gear (Replacement Renault Clio II/Thalia Air heater flap actuator motor gear)

Renault Clio II. / Thalia ventillation system one of the gear usually breaks. This is a replacement gear. Need some voltage reduction to not breake the 3D printed gear.

Pobrania
268
Polubienia
19
Ocena
5

Elegoo Centauri Carbon active chamber with Creality Chamber Heater

Хочу поделиться с вами моделями, которые я делал в ходе модернизации своего принтера Elegoo Centauri Carbon, чтобы получить активную камеру. Всего это 5 файлов: Фиксация проводов для вывода их из камеры (2 файла), рампа для циркуляции…

Pobrania
264
Polubienia
66
Ocena
5
P
PrintablesR3men

K1 / K1c / K1se SSR Mount for Bed Heater Upgrade

Print Install 2x 3*3*5 heat inserts Attach an SSR with 2 M3 screws Attach the mount on the rib next to the motherboard. BOM: 2x 3*3*5 heat inserts 2x M3 screws Creality K1 series heatbed upgrade - Graphite Bed available on Aliexpress: K1…

Pobrania
263
Polubienia
20
Ocena
5
P
PrintablesPC2CV

Peugeot 407 Heater flap reinforcement

Reinforcement parts for a Peugeot 407 heater flap. As used in this video The steel spine is not shown here as it is not 3D printed but easy to make elsewhere. The parts were printed from PETG 5 perimeters with 50% infill to give as much…

Pobrania
260
Polubienia
10
Ocena
0
P
Printablesindymusician

Heater Stand for PTC Heater

I designed this to get my PTC heater up off of the heated enclosure floor to allow airflow for the fan. Printed in ASA. No supports. The heater I used was this: Constant temperature Electric fan heater PTC fan Auto heater Small space…

Pobrania
257
Polubienia
54
Ocena
5
P
Printableskadous

Heater vent key / Klíč na odvzdušnění topení

This is a tool for the home services. This model is prepare for a heater vent repair. Size of the square inside is 5x5 mm. Printing: Is it better to print it from PETG or ABS in laying down positionto make the tool stronger. For the print…

Pobrania
257
Polubienia
26
Ocena
4,5
P
Printablesscottrouse

RV Water Heater Anode Port Cover

This is a threaded plug that is designed to fit in the anode port of a Suburban brand hot water heater commonly found in RVs and travel trailers. The plug has a grid-shaped vent to allow for airflow into and out of the water heater…

Pobrania
256
Polubienia
47
Ocena
5
P
PrintablesMrDic

Lego Heater Shield (Wolfpack & Blank) 10:1

I decided to make my Lego Skeleton in to a castle era model. Looking online there were not any high quality shield STLs available. Using a stl from printablebricks as a template, I rebuilt it in tinkercad and included the classic Wolfpack…

Pobrania
255
Polubienia
47
Ocena
0
P
PrintablesJevermeister

Voron V0.1 3x Wago 221-412 mount for the bed heater

Voron V0.1 3x Wago 221-412 mount for the bed heater Based on the Voron V2 / 2020 mounts by Boingomw which you can find at https://github.com/boingomw/VoronUsers/tree/master/printer_mods/Boingomw/Wago_mount Use 2x M3x8 SHCS to secure them.…

Pobrania
248
Polubienia
36
Ocena
5
P
Printables3DPrintDemon

TARTARUS Heater Core Module! PTC chamber heater enclosure. Top Hat Voron 2.4

…Please be sure to hit like & post a make, I'd love to see your prints! WARNING! If you do not know how to wire this system correctly & safely I STRONGLY recommend you DO NOT attempt to print or use this model as you are dealing with…

Pobrania
246
Polubienia
146
Ocena
0
P
Printablesglennvr698

Centauri Carbon Cradle for Chitu Mini Heater H2

Description Here is a mounting solution for Chitu Systems Mini Heater H2 inside the Centauri Carbon. Installation This mounts to the M3 threaded hole located on the left side of the printers base. I used Fleeeinlan3D's version of SE3D's…

Pobrania
245
Polubienia
37
Ocena
5
P
Printablestyler

Prop opera glasses / theater binoculars

Designed this prop opera glasses / theater binoculars for a friends birthday. There are holes so you can look through them. I printed them "looking" upwards. Supports are needed for the middle bit and under the arm. Enjoy! Category: Props

Pobrania
244
Polubienia
9
Ocena
0
P
Printablesbloblob

Mystery Science Theater 3000 Modular Silhouette

This is a modular 3D printable silhouette based on the TV show Mystery Science Theater 3000 (MST3K). Put it on the your TV, computer screen, or even a window! MST3K Silhouette.stl has the 3 characters and is just over six seats wide, and…

Pobrania
243
Polubienia
41
Ocena
0
P
Printables4cmclean

Mars 4 Ultra Resin Printer Heater Bracket with Antenna Mounting

A heater mounting bracket for the Elegoo Mars 4 Ultra Resin printer using a specific off the shelf 12v 5 amp heater unit. https://www.amazon.com/dp/B0BL6WZPM9?psc=1&ref=ppx_yo2ov_dt_b_product_details…

Pobrania
239
Polubienia
26
Ocena
5
P
Printables@3DTimeSculpt

Elegoo Centauri Carbon Chamber Heater

I designed this Chamber Heater Adapter for the Elegoo Centauri Carbon to be a clean, secure, and fully reversible way to add active chamber heating to the printer—without drilling, cutting, or permanent modifications. This model is an…

Pobrania
237
Polubienia
60
Ocena
5
P
PrintablesVicoBim

Theater Mask - The innocent

An artistic mask, perfect for home decoration, artistic performances, costumes, or simply experimenting with painting and finishes. In this file, you will find the mask with or without the attachment system. I also added a .3mf files to…

Pobrania
233
Polubienia
45
Ocena
5
P
PrintablesAnthony S

Phrozen Sonic Mighty 8K/12K riser/lid spacer and PTC heater frame

This is a mod for the Phrozen Sonic Mighty 8K/12K. It is a lid spacer/riser and frame for a PTC heater and W2310 temperature controller. The spacer is used so that there is no drilling/cutting of the cover and base for cabling and…

Pobrania
228
Polubienia
27
Ocena
0
P
PrintablesNylon

Xerox Interlock Cheater

Tool for bypassing Xerox door interlock switches. A must-have for performing repairs on any Xerox production press. Compatible with most Xerox interlock switches 8 minute print No post-processing F3D file included Recommended settings: No…

Pobrania
228
Polubienia
11
Ocena
0
P
PrintablesXboxusr666

Ender 3 S1 Heater Block Wrench

Example picture was made on hatchbox petg with 4 perimeters and 7 top and bottom layers, .16 layer height 80% infill probably overkill but it works

Pobrania
224
Polubienia
38
Ocena
4,75
P
PrintablesStefan

Kids Gloves Dryer - Towel Warmers/Heater Hook

Winter has come and the children are outside all the time. They only come in briefly to eat at lunchtime. The robe drips every time. And the space on the towel dryer is tight. Towel dryer? There is no room for towels here! :D I designed a…

Pobrania
224
Polubienia
103
Ocena
5
P
PrintablesAlli Price

Fail-safe Chamber Heater SSR for Qidi Plus 4

This project enhances the safety and reliability of a the Qidi Plus4 chamber heater by upgrading critical components and adding multiple layers of protection. The modifications include replacing the original 5A Solid State Relay (SSR)…

Pobrania
221
Polubienia
112
Ocena
5
P
Printablesthedailymarc

ender 3 v3 se fan shroud for k1 ceramic heater

I am providing two files, I personal used the one without the notch and then cut it out my self. I made the second one with the notch after I found out it wouldnt fit. vent ring can be found on @Conrad_F89, or go to the remixed link you…

Pobrania
221
Polubienia
24
Ocena
0
P
PrintablesExotechd

Diesel Air Heater Vent 90"

In Diameter 75.8 mm Chinese diesel Air Heater Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Automotive

Pobrania
213
Polubienia
32
Ocena
5
P
PrintablesDarbooka

Propane tank heater stand for Coleman 1lb tanks

Made this for a heater that attaches to a Coleman 1lb propane tank. Without the stand, the slightest nudge would make it fall over. With the stand, it can be smacked around and will stay upright. Printed in PETG, no supports, 15% gyroid…

Pobrania
210
Polubienia
17
Ocena
5
P
PrintablesMarcin Bielecki

Towel hook Clothes radiator heater

This is a very simle print to organise your towels on the radiator. Quick installation, no drilling or gluing required. It can be easily hung Any position on the radiator at different heights and any time intervals.

Pobrania
209
Polubienia
19
Ocena
4,67
P
PrintablesAndizzle

Creality K2 Plus Chamber Heater Recirc Mod - Magnetic

Uses 8x2 magnets Might not need to use all slots depending on how strong your magnets are.

Pobrania
205
Polubienia
42
Ocena
5
P
Printablesglennvr698

Centauri Carbon Display Mount for Chitu Mini Heater

Description Display mount for Chitu Mini Heater that mounts to the left side of the printer. There are 2 screws in the base that will need to be replaced with M3x8 screws. I tossed in the step file for anyone who would like to modify it…

Pobrania
205
Polubienia
32
Ocena
4,8
P

Creality K1C/K1 Chamber Heater

BOM: 1 x 12032 Blower Fan. I unscrewed the side blower and turned it over. 1 x 220v 45x55x15 300w PTC Heater Core. Buy there and disassemble it https://www.aliexpress.us/item/2251832781637089.html 7 x M3 Heat Inserts 4 x M3 20mm or longer…

Pobrania
200
Polubienia
131
Ocena
5
P
PrintablesBoba Fett

Theater of Magic Trunk - Bally 1995 Pinball Game

This is a Theater of Magic Trunk. Theater of Magic is a Bally 1995 pinball game that is quite well regarded. The trunk is a main target and the original and replacements crack and break. Occasionally flexible replacements have been made…

Pobrania
197
Polubienia
16
Ocena
5

Solar Pool Heater

A K'nex/TinkerToy/underfloor heating inspired solar heating system for your small outdoor pool. Mine takes a 500 gallon pool from 65F to over 90F in one sunny Colorado day when used with the black pool cover. I filled a 5 gallon bucket in…

Pobrania
194
Polubienia
298
Ocena
0
P
PrintablesAndys1957

Dream Theater (Majesty) Logo + Keychain

Dream Theater (Majesty) Logo + Keychain FCStd, STL, Step

Pobrania
194
Polubienia
18
Ocena
4
P
PrintablesHD_Creator

Pulley for Mk3S to feed filament from heater box

The story behind this part Printing out of a dry box had not worked out for me so far, as I have no means of placing a drybox above my printer where it is located. On the other hand, I finally got tired of unloading my PETG filament every…

Pobrania
192
Polubienia
60
Ocena
5
P
PrintablesCarmelo Padula

How to add 115V/220V AC Chamber heater to Creality K1 Series or any klipper printer

WARNING: Disconnect your printer from AC power before proceeding. Death or serious injury may result from attempting to work on your printer while it is plugged into AC power. How to install a chamber heater the safe way My main gold is…

Pobrania
191
Polubienia
72
Ocena
0
P
PrintablesElevation

Chinese diesel heater air intake adapter

A friend needed an adapter for the air intake of his cheap chinese heater to a standard fire hose copling. The intent ist to create a mobile heating box. So this maybe useful for similar projects. Please note: This is meant for the intake…

Pobrania
189
Polubienia
27
Ocena
0
P
PrintablesJames Bufkin

Snapmaker J1 or J1S tophat printable remix with Chamber Heater

Printable side panels and corners. Use M4x12 screws with inserts. The holes on the corners are good enough that you don't need inserts. You can use nuts and M4 bolts to attach the panels together. You need 6 short panels,2 long panels, 4…

Pobrania
189
Polubienia
20
Ocena
5
P
Printableskoz

Anycubic Photon Mono 2 mini heater spacer

Introduction Resin printers are typically kept in cold garages or sheds, as they're messy and smelly. However, this often subjects them (and their contents) to low temperatures, which can make it difficult to print, especially if you live…

Pobrania
189
Polubienia
23
Ocena
0
P
PrintablesAWarchol

Chamber Heater Mounting Bracket

Safety First! 110V PTC heaters have live mains voltage on the heating coil. Only for use by those knowledgeable and comfortable with mains wiring. I made an DIY insulated enclosure for my Creality Ender 5 Pro to print ABS/ASA. I was able…

Pobrania
188
Polubienia
39
Ocena
5
P
PrintablesHenk

Seat Belt Cheater

First of all: Do not use this device to drive without a seatbelt! I do not accept any liability. You are responsible for your own decisions! In my car I there is a problem with the seat belt alarm for the middle seat in the second row.…

Pobrania
187
Polubienia
26
Ocena
5
P
PrintablesNozzle

heater knob Bomann Heißlüfter Schalter

A replacement knob that fits a Boman heater.

Pobrania
186
Polubienia
12
Ocena
5
P
PrintablesJohannes

greek theater

this is a model of a greek theater. it is not any specific thater but a model that follows is simmilar in its design.

Pobrania
186
Polubienia
11
Ocena
5
P
PrintablesGustyWaders

Nextruder Nozzle Wrench for Extruder with Sock that Nests Inside Heater Block Clamp

I subtracted the chamfer of Mike Ant's module from FluffyBunny's model. Now it works for an extruder with a sock and nests neatly inside IBNobody's MK4 Nextruder Nozzle Change Heater Block Clamp. I'm sorry it looks that way.

Pobrania
186
Polubienia
32
Ocena
4,8
P
PrintablesDsk001

Alien3D Drink Cooler / Heater

This is the project for the Alien3D Aug UFO Box It is a drink cooler/heater using a Peltier plate, a heat sink and a fan. WARNING! If you are going to use it as a drink heater, it can reach temps above ~130F/~55C. It is not safe to touch…

Pobrania
185
Polubienia
24
Ocena
4,89