1693 modeli
Prusa Steel Sheet Holder for 2, 3 or 4 steel sheets. Print instructions Print in PETG or PLA with 0.3 layer hight and 5% cubic infill. Added a new, wider steel sheet holder for 2 sheets.
Wydruk około 2,68 €–3,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The remake of Puse RC1 and RC2 face shield. RC3 is mix of RC1 and RC2, it has extra space for glasses/goggles and better side protection. If you are printing it for someone else, please wash hands very well and carry mask/shield when…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
Prusa Mini Steel Sheet Holder for 3 steel sheets based on iFreyz's Model you can also add Extended Stability Feet to join 2 holders
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
This is an addition to the 'Prusa Steel Sheet Holder 2er, 3er and 4er' to improve stability. Problem: the surface area of the 2 slot version of the sheet holder is small and the sheets are tall, this causes the holder to fall on the side…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena jednego wariantu
Printable Sheet Holder for your Origginal Prusa Enclosure for 2 or 3 Sheets with one Tool Holder (allen key). Update 01.12.2022: Added a slot to insert a square nut. Square nuts come from spare parts. STL files with the _nut extension.…
Wydruk około 10,27 €–12,55 € nettoWstępna wycena jednego wariantu
Liked the design, but didn't want to screw holder to table. So I created version with balance support.
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
Prusa CORE One Print Sheet holder Simple magnetic print sheet holder for your Prusa CORE One. This model uses 6x3mm magnets commonly found in Voron projects. This model fits 3 Prusa print sheets. Check out the remixes for different magnet…
Wydruk około 2,73 €–3,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
JERRARI3D.com Modular solution for storing steel sheets under your enclosure or table top. This version is FULLY ADJUSTABLE in width and depth Supported Printer Sheet Sizes Ex. Prusa Mini, Creality Ender 3 Minimum sheet size: 175mm wide x…
Wydruk około 2,40 €–2,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the print sheet holder designed by Waldmops. This a stand alone version. I printed in PETG but it should work with PLA Infill: 15% Layer Height: 0.2mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 6,20 €–7,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
More information on this weave can be found here https://www.mailleartisans.org/weaves/weavedisplay.php?key=11 it has a very strong directional element that makes it look like scales. this is just a small section but larger parts will be…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
Chester the Cheetah Mascot for Cheetos
Wydruk około 12,07 €–14,75 € nettoWstępna wycena jednego wariantu
JERRARI3D.com Modular solution for storing large steel sheets under your enclosure or table top. This version is FULLY ADJUSTABLE in width and depth Supported Printer Sheet Sizes Ex. Prusa XL, Voron, etc. Minimum sheet size: Any width x…
Wydruk około 5,57 €–6,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Extended Stability Feet to connect 2 Prusa Steel Sheet Holder and / or Prusa MINI Steel Sheet Holder based on Angelo's model
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
A new redesigned version GEN2 Steel Sheet holder is available now: GEN2 Steel Sheet Holder V2 for Lack Enclosures _____________________________________________________________ The Gen2 Steel Sheet Holder for Prusa MK2.5 and MK3 is part of…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Yes, it's another steel sheet holder for the MK3/MK3S/MK52. But this one is for the Ikea PLATSA. There wasn't any yet, so it's fine 😉 Made to have a tight grip on both Prusa's smooth and textured sheets. With any other sheets, fitment may…
Wydruk około 4,86 €–5,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3D-printed Metal Bending Tool for Sheet Metal fitting for a Heuer Front 120 vice. Tested with 1mm aluminum and 0,8mm steel - I didn't see any wear on the tool parts during bending. Printed on a Prusa Mini in PET-G with 12 perimeters and…
Wydruk około 21,71 €–26,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple holder for two Prusa Mini steel sheets.
Wydruk około 5,35 €–6,54 € nettoWstępna wycena jednego wariantu
A simple tablet and/or sheet music holder I designed for my Alesis Nitro Mesh E-Drum rack. Since it is a customizable OpenSCAD design it's possible to create variants fitting other racks, as long as the is a horizontal pipe at the right…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holds up to 5 sheets Name of each sheet readable → easy selection Sheets safely embedded in the holder with stops → no sliding out Small footprint in desk space and in filament usage L x B x H = 265 x 90 x 276 mm Printed with HF nozzle…
Wydruk około 5,38 €–6,57 € nettoWstępna wycena jednego wariantu
I modified Haymount 's IKEA SKADIS MK3/s Steel Sheet holder , to fit two Mini(+) Steel Sheets to be mounted on the Ikea Skadis pegboard. I have included the .step file if you need to modify something. Print instructions You will need some…
Wydruk około 3,49 €–4,26 € nettoWstępna wycena jednego wariantu
I liked the idea of the "Stability Feet for Prusa Sheet Holder", but I wanted to screw the feet into the top of my enclosure. It makes the Sheet Holder removable but the whole thing is much more steady since it is mounted into the top of…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prusa Steel Sheet Holder for 2 steel sheets Software PrusaSlicer Filament: PLA or PETG File: .STL or .gcode Supports: Everywhere Infill: 20% Or Recommend: File .3mf (3D Manufacturing Format) Thank You ;-)
Wydruk około 7,51 €–9,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the Expandable Steel Sheet Holder remix for the Prusa Box enclosure. I have tested the version for the modular display for the Prusa Box (see pictures) but I haven’t tested the version for the stock Prusa Box (that’s why i have…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
28 April 2023: I will no longer be supporting revisions to this model. You can use it as is, and add negative shapes to fit the dimension of your tape/magnets. I have been so busy that this has fallen off the list of priorities. It's…
Wydruk około 17,47 €–21,35 € nettoWstępna wycena jednego wariantu
Same as the original with hidden screws but cut down to four sheets and scaled up so you can put your sheets in landscape orientation. Print instructions Rotate the object by [0, 0, 33°] and print the infill with an angle of 78° .
Wydruk około 10,14 €–12,40 € nettoWstępna wycena jednego wariantu
EN: if you dont have a rod at home for the gadget- print one! Exact size for A4-sheets. Material: PLA Layers: 0.3 Supports: no see also https://www.printables.com/de/model/834685-mini-photo-booth-rod-for-a3-sheet…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Just a remix of the 2 sheet holder from the original STL "sheet-hol der-2er-new.stl". Remix to stagger the back side of each slot so that it is easier to align the sheets when inserting.
Wydruk około 5,12 €–6,26 € nettoWstępna wycena jednego wariantu
Enjoying your Lack Enclosure Drawers from Jerrari, but also think Whity's Expandable Steel Sheet Holder looks real cool? Why choose one when you can have both! Prints as right and left brackets that mount to the A1/R1 versions of the…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This holder fits Prusa MK2/MK3/MK4 steel sheet size. It is not compatible with Prusa Mini or XL steel sheets. For mounting options, please see the the original model . Please note that you don't need to mirror this model whether you want…
Wydruk około 2,98 €–3,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the same great design, but without the slots for the mini sheets. It also has a wider base for stability, a cutout to save materials, and sealed slot-bottoms so the sheets don't scratch my wood shelves. Print instructions PETG…
Wydruk około 4,15 €–5,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for five Prusa XL Steel Sheets. All sheet sizes fit this holder. I designed this holder from four parts. Stable with simple design and hexagonal pattern. The possibility of simple color combinations. There is a 15 mm gap between…
Wydruk około 6,52 €–7,97 € nettoWstępna wycena jednego wariantu
Use this bracket to stretch your bedsheet. Just buy a 2 cm wide rubber band, fold it, push it through the hole, make a loop and secure it with a wedge. Do that at the both ends. The rest is easy, just put the insert from the opposite side…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original feet fall off if you raise the sheet-holder. I added snaphooks to avoid this. Now they stay at the sheet-holder without use of glue. Works for 3x sheet-holder. I used PLA, but i am sure it also works with PETG. Fits perfect…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ Organize your build plates of all sizes in style! This minimalist, premium-looking holder is designed to fit the IKEA SKÅDIS pegboard and securely store up to…
Wydruk około 1,97 €–2,41 € nettoWstępna wycena jednego wariantu
Here is the model I created for Steel sheets. It holds two sheets, on either side of the table. I have included individual .STL files for all parts, .3MF files for combined middle and right/left holders that go on the legs of the table…
Wydruk około 3,66 €–4,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a place to put my spare build plates and had no room on my table. So this model mounts right on the side on the enclosure. 2 M3 screws work great at securing it to the enclosure. Prints in about an hour! If you like the work I do…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
I really like the remixed print sheet holder, but could not use it anymore with my Ikea Drybox Mount . So I created this remix which makes the print sheets accessible from the side. Like the original the holder gets mounted with two M3…
Wydruk około 4,99 €–6,09 € nettoWstępna wycena jednego wariantu
Steel sheet holder that is graduated so that you can see what sheets are in the holder without moving others out the way. It also allows you to see them inside an enclosure without opening the enclosure and potentially ruining a print.…
Wydruk około 9,94 €–12,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Additional part to the mini photo booth If you dont have a rod at home for the gadget- print one! Exact size for A3-sheets. Material: PLA Layers: 0.3 Supports: no For A4-sheets see:…
Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu
Print 2x Print resolution: 0,15 Supports: no material: pla Don't forget add photo
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
Changes It is thicker so it is easier to grip during removal from sheet. Thicker also keeps the parts further apart and allows for more sheet ‘bunching’ to fit between the parts. The “very thin” section is now thicker. The original had a…
Wydruk około 0,59 €–0,73 € nettoWstępna wycena jednego wariantu
This is a small model that can be printed in different contrasing colours, but i can assure you that any colour will do it justice! It has taken a little while to make so please post a make and leave a like to show your appriciacion.
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
Remixed version of the Sheet Holder by RoboMagus (https://www.prusaprinters.org/prints/35073-prusa-steel-sheet-holder-open-front) adapted to the size of the prusa mini sheets (80,78% X and Z axis, 80% Y Axis) with tighter sheet slots and…
Wydruk około 3,49 €–4,27 € nettoWstępna wycena jednego wariantu
Just another printbed holder. It should be able to stand by itself, without any glue.
Wydruk około 5,07 €–6,20 € nettoWstępna wycena jednego wariantu
With the release of the PP powder print sheet the XL now has a repertoire of 5 different sheets. For comfort, it's very convenient to have a dedicated storage for each type, especially during calibrations. This remix of the ArISSH can…
Wydruk około 14,71 €–17,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The XL enclosure marked the arrival of the 4th steel sheet. It felt quite cumbersome to have the 3 slot version full with the remaining 3 and when having to run a calibration, toss the 4th one somewhere in the meantime. Now with this 4…
Wydruk około 13,89 €–16,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a sheet of the hoodoo hex pattern, wilI l update it with a few sizes and the parametric model when done.
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
I have an IKEA Skadis board right next to my printer. I'm currently going through it and organizing it into half functional tools that I use around my printer often and the other half being different prints I have made in the past. I…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu
Back Gauge Add-On The back gauge helps bending same lengths several times without the need of marking your sheets before. Just set the leg length, tighten the bolts and bend as usual. Just one sheet after another without interferring. You…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As you may already know due to the covid_19 medical supplies are running out quickly and people who are at the front lines are struggling to keep themselves safe. To try and help I have designed a quick and easy design of a face shield…
Wydruk około 0,85 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Jobo 1500 series tank system does not officially support processing 4x5 sheet film. This insert fits 2 sheets and requires atleast 3 35mm film spools of vertical space. So you need the 1530 tank module to fit it. It prints in two part…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🇺🇸 Do you know the problem of your bed sheet always being all messed up in the morning? Me too. That's why I created this little holder that prevents your bed sheet from slipping. Grabs your sheet and gets fixated by the matress. 🇩🇪…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Die Prusa MK3* MK4* PIE-Halterung ermöglicht die platzsparende Aufbewahrung der Platten unter einem Regal.
Wydruk około 21,86 €–26,71 € nettoWstępna wycena jednego wariantu
I love the vertical format of the original holder, and wanted to incorporate it into my gridfinity system. My goal was to use the smallest grid section possible, which is 1x7. I trimmed the ends of the outer blocks so it can be printed…
Wydruk około 4,57 €–5,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After building my printer and doing the first designs, I realised I was leaving a finger prints on the print sheet every time. Of course I still clean everything anyway, but wanted a way to remove things. I now of course have found…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Prusa Steel Sheet Holder for 7 steel sheets. Simple design, nothing fancy. Printed in Galaxy Red Prusament PLA with .25mm SPEED profile, 70g of filament.
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
Model je připraven ve dvou verzích. verze 1. (IQOS_ALL_PRINT-lock_version_0.2mm_PETG_MINI_9h59m) není potřeba po dokončení lepit lepidlem. Vrchní díl se spojí pouze spojakma. verze 2. (IQOS_ALL_PRINT-glued_version_0.2mm_PETG_MINI_9h45m)…
Wydruk około 8,23 €–10,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sandpaper sheets and sticks storage/organizer. 4.125"W x 9"D x 3.75"H with 5x 3/8" slots for sandpaper sheets. Included a sidecar with a 6"x1.25"x1.25" bin for sanding sticks and a 2"x1.25"x1.25" bin for whatever you can think of.
Wydruk około 36,03 €–44,03 € nettoWstępna wycena jednego wariantu
I've added 2 holes for the screw heads for using with the Cable Cover. You need 3x M3x8mm
Wydruk około 30,13 €–36,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description This is a remix of G.wrks Spare steel sheet holder wall mount (thanks a lot!). It removes the screw holes for mounting with adhesive strips. It also adds wedges at the back that make the strip ends accessible after mounting. I…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Airsoft Sniper VSR Remington 700 sheet for legs. It is a replacement sheet, if you need it, the original one is lost or destroyed. It fits perfectly! It…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
See the picture with the distance of the screw holes, my be you don't have to drill. Print the model twice, no support. Drucken Sie das Modell zweimal aus, für oben und unten. Sie benötigen vier Spax Schrauben. Sehen Sie sich das Bild mit…
Wydruk około 2,51 €–3,07 € nettoWstępna wycena jednego wariantu
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
This is a buildplate holder for 5 buildplates of the Prusa MK3 / MK3S / MK3S+ / MK4 / MK4S / CoreOne with an added handle for improved stability, and thanks to that it is also easier to move around. It fits perfectly to the Ikea lack…
Wydruk około 10,79 €–13,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I added 0.2mm tolerances to the orignal knob and the connector. Print Settings: Same as in the original Model!
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
Built to go along with Jerrari's Lack Table Sheet holder (https://www.printables.com/model/295913-gen2-steel-sheet-holder-v2-for-lack-enclosures) it fills the gap at the top and pulls the cases together, making the steel sheet holder…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In my water bed, the bed sheet tends to get pulled off from the corners of movements in the bed. The idea was to fasten them to the corners somehow to prevent this from happening. Fortunately, there are some round holes in the base plate…
Wydruk około 4,55 €–5,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die Halterungen ermöglichen staubfereien Aufbewahrung den Druckplatten unter einer Regal.
Wydruk około 27,05 €–33,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
I made this holder for my Hurricane Sheet Metal Hand Seamers, I have 3" and 6" versions that take up a log of space laying down so I thought hanging from a overhead shelf would be most efficient. The 6" seamer is quite heavy so I made the…
Wydruk około 3,83 €–4,68 € nettoWstępna wycena jednego wariantu
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
Ich habe den Steel Sheet Holder für vier Bleche. Daher habe ich diesen Remix erstellt. I have the Steel Sheet Holder for four sheets. So I made this remix.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Wydruk około 1,94 €–2,37 € nettoWstępna wycena jednego wariantu
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
You can join cover and holder by 2 pieces of M3x6 screw, or you can use attached pins.
Wydruk około 5,25 €–6,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3D printing sheets holder for Prusa printers with name on it.
Wydruk około 5,31 €–6,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
made this to keep glass off the ground
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The assembled unit is an insert in music folders. It is used to hold and organize original sheet music for singers in choirs. The sheet music holder is made up of two parts which can easily be printed on a small print bed. They fit…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
Motivation For Christmas I got a special present from my son: A 45x32cm photo printed on metal sheet by displate.com For mounting this poster, a 80x80mm magnet needs to be glued to the wall. The magnet then can hold the metal sheet paster…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
"Slightly" overengineered flexible steel sheet holder for MK and MINI printers to be screwed to a shelf. It's also extendable to as many as you want. Variants for other steel sheets: Prusa XL Bambu Lab A1 Support my work For non-Prusa…
Easy Install version Snap-On set of bed sheet aligners. Compatible with factory bracket, Also Strain Relief & Cable Chain Anycubic Cable Drag Chain Anycubic Strain Relief PETG Print with 15% to 20% infill. Left Mount needs support:…
Since i got powder coated sheets, i had to put multiple sheets somewhere So i made this sheet holder! Nothing special just a simple shape but at the bottom, there are hexagonal holes to let the air go through tho I removed my logo areas…
Back Left Mount V3 Now compatible with Cable Drag Chain OEM Strain Relief Installation: 1, Hook the bottom corner under bed of OEM bracket first. 2. Hold the corner you hooked bring it around the bed. 3. Then press down on top of bed…
JERRARI3D.com Modular solutions for storing steel sheets for the PRUSA i3 (MK2.5 and MK3) and Bambu Labs (X1 and P1P) Unlike my original steel sheet holder the GEN2 Steel Sheet Holder V2 does not require a backer mounted on the underside…
I used Prusament PLA Prusa Galaxy Black for printing. It would be nice to use a different color for each part of the ashtray. width: 100mm height: 120mm
A two-piece corner clamp designed to help keep your fitted sheet from slipping off the mattress. The base sits against the mattress corner, underneath the fitted sheet. Pull the sheet over the base, then fit the outer clip to hold the…
Keep your Prusa i3 steel sheets organized and dust-free with this sturdy, under-table storage solution. Designed for all recent Prusa i3 models with a standard bed size, this holder will not fit the Prusa Mini due to its smaller bed…
hit the like button if you downloaded it, so i can get the prusa meter , thanks Update 2024.10.12 (V2) Wall thickness 2 mm, strong enough for a case and faster to print Dummy Case depth 25 mm Toolbox depth option, Short 25mm, Medium 30mm,…
What started out as a remix has now been completely overhauled in CAD to require a bit less Y-overtravel and be a bit more robust. If you are here to reprint a specific part, or using parts from other remixes, it may not fit together…
Updates: V1.1 - 1/14/2024 - Google depreciated their QR code generator. I have converted to using quickchart.io for QR code generation. Some changes in the setup instructions, some changes on the backend though. Changes noted here: ●…
This is a wall mount holder for the Prusa MK3 and MK3s steel sheets. It´s easy to take the sheets out, because it is arranged in stages. I designed two versions: SheetHolder3x and SheetHolder5x
The included files let your turn the bed model in PrusaSlicer / SuperSlcer into a textured PEI style build plate with grid markings. The specific shape of this bed is modeled after the included Ender 31 Pro PEI sheet. Note: I've included…
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…
A holder for three Flashforge Adventurer 5M build plates.
Experiment with 3D printed mesh sheet. Requirement: Print at 0.2mm layer height Optional: Do filament swap/color change on second layer in your slicer to get funky colors.
![[PRUSA] BOX Enclosure Expandable Steel Sheet Holder](https://media.printables.com/media/prints/78667/images/855690_2b1f6920-39c4-45a0-8651-1081fe7299bc/5a577f7e-5478-4eb7-8e3a-fe4728e46728.jpeg)
