Wyniki wyszukiwania: hoe

Sortowanie

3381 modeli

P
Printablesfifindr

Shoe Horn

A compact shoe horn designed to help slide your foot into a shoe more easily. Place the tool over the heel area of the shoe, slide your foot in, then simply pull the shoe horn out. Useful as a small everyday helper for sneakers, casual…

Pobrania
6042
Polubienia
1392
Ocena
4,97
P
PrintablesCodeName X

Shoe organizer_Less Filament. More Power. Fits All shoe Sizes.

<033125 Adds> Update "v5" for more clear honeycomb shape. WTF? Differences from the Great Original 3D Model: Added a toe hole to accommodate shoes over 20cm. Reassigned the honeycomb holes. Adjusted the stiffener pillar angle for improved…

Pobrania
3533
Polubienia
1114
Ocena
4,9
P
Printablesecoiras

Big Shoe Horn

This is a remix of "shoe horn | no support" by cashew675, which you can find here: https://www.thingiverse.com/thing:4119614 I liked the original design very much and especially the fact that it could be printed on the side, as this means…

Pobrania
3217
Polubienia
299
Ocena
4,76

Hot Shoe Cover

Standard camera hot shoe cover. Some cameras like my Nikon D850 and D750 do not come with a hot shoe cover, and the original manufacturer part is around 10 bucks each - for a tiny piece of f-ing plastic. I know there are numerous other…

Pobrania
2621
Polubienia
263
Ocena
4,89
P
PrintablesUloPe

Stackable Shoe Rack (metric version)

Side panel to construct a (stackable) shoe rack from 18x200mm wood boards. Fits exactly on an MK3(S) printbed. The model is customizable on OnShape via variables . This is a re-model for metric wood boards of the original:…

Pobrania
1974
Polubienia
753
Ocena
4,94
P
Printablestransformat

Folding Shoe Rack or Shelf - Print-in-Place

Folding Shoe Rack or Shelf - Print-in-Place When the whole family comes to visit again, just unfold your foldable shoe rack and the mess will disappear. It could also serve as a temporary shelf, e.g. for DIY projects. Printing Print the…

Pobrania
1653
Polubienia
625
Ocena
4,92
P
Printablessh

👟 Shoe horn - angled end (no support)

Info: big shoe horn angled end, so you can hang it on any hanger length: 27,8cm Print info: 6 perimeters, so it is completly made of perimeters 0.2mm layers PETG no supports use wide brim (like 8mm), so it sticks well to textured PEI…

Pobrania
1615
Polubienia
126
Ocena
4,86
P
PrintablesMajlen

Shoe organizer

Jednoduchý a přitom funkční. Nutno přizpůsobit rozměry (já tisknu x 180, y 100, z 75 - na fotce boty vel.37).

Pobrania
1076
Polubienia
137
Ocena
5
P
PrintablesRatasich

Cold Shoe (for Storage Cheese Plate)

Designed for the Storage Cheese Plate , this print can be attached with a single ¼" screw .

Pobrania
967
Polubienia
55
Ocena
5
P
Printablesburtworks

Hot Shoe / Cold Shoe Mount for Webcam

This is a Hot Shoe / Cold shoe mount to mount a webcam on top of a camera. ¼-20 thread tripod mount. I used this to mount my webcam for Octoprint on top of my DSLR I'm using for Octolapse within Octoprint. It's very light duty even when…

Pobrania
942
Polubienia
87
Ocena
4,75

Running shoe keychain (Nike)

A simple keychain of a running shoe. Modeled using a picture of the Nike Air Zoom Pegasus Here is a similar model of a Saucony and Adidas running shoe that I made. Slicer instructions: The STL has 5 different parts (bodies). You can…

Pobrania
822
Polubienia
84
Ocena
4,67
P
PrintablesGokburt

The ultimate space-saving shoe hanger and dryer (modular!)

Tired of shoes cluttering your entryway or taking up precious floor space in your closet? Meet the ultimate 3D-printable shoe hanger : the simplest, most effective way to organize your footwear and speed up the drying process. Whether…

Pobrania
787
Polubienia
403
Ocena
5
P
PrintablesTony Borisov™

The best hack for your sneakers / Make your shoes look neat

If you have sneakers like mine, the 3.4mm hole would best fit you. If not explore the rest of the models. The model is tested and I didn't have to readjust my laces for 1 week, despite of running, walking and other sports. Let's see if I…

Pobrania
742
Polubienia
407
Ocena
4,88
P
PrintablesWP_Master

Montessori kids game "Lacing Shoe"

Model inspired by wooden lacing shoe. Great oportunity how to use your printer. Kids will be happy. No extra printing instruction. Print without supports, 10% infill, add 3 perimeters for extra durability. Two colors for bottom part are…

Pobrania
590
Polubienia
223
Ocena
4,83
P
PrintablesPrint-Head

(Thicker) Mini SHOE Horn with HONEYCOMB Cut-Out | REMIX

(Thicker) Mini Shoe Horn with HONEYCOMB Cut-Out | REMIX Made a HONEYCOMB Cut-Out remix from the great original model and added a hole/honeycomb version for the thicker version of the shoe horn as well, the original hole was a bit too…

Pobrania
474
Polubienia
101
Ocena
5

Running shoe keychain (Adidas)

A simple keychain of a running shoe. Modeled using a picture of the Adidas Duramo SL Here is a similar model of a Saucony running shoe that I made. Slicer instructions: The STL has 5 different parts (bodies). You can customize the slicing…

Pobrania
407
Polubienia
60
Ocena
5
P
Printablesjcjames_13009

E-Nable UnLimbited Phoenix Hand

I wanted to present and share with you a project I worked on for E-Nable community that aim to make free and low-cost prosthetic upper limb devices for children and adults I 3D printed using Prusament PLA on my Prusa MINI+ and assembled…

Pobrania
399
Polubienia
53
Ocena
5
P
PrintablesToby3D

Shoe Eyelet

Made from PLA 0.1mm layer height 20%infill Glue Version requires Glue Click Version with slightly inner diameter is more durable

Pobrania
369
Polubienia
61
Ocena
5
P
Printablesedjsage

Small Shoe Mat/Drip Tray

This is a simple shoe mat/drip tray. Use it for whatever. I made this specifically for my son so he could have his own spot for his toddler shoes. https://ko-fi.com/edjsage

Pobrania
367
Polubienia
54
Ocena
5
P
Printablesalexander2.0

Shoe display stand

-new version available (name: Shoe-display-stand-new ) -make sure to print it with a brim

Pobrania
318
Polubienia
27
Ocena
5
P
PrintablesMatt B

X-Carve Dust shoe for Dewalt 611 spindle

This remixed dust shoe is designed to work with the Inventables Spindle Carriage, P/N 80033 for the Dewalt 611. The upper dust shoe and support arms now contain slots for nuts (both square and hex). This should allow for…

Pobrania
289
Polubienia
39
Ocena
4,67
P
PrintablesWheelDeal

Chevy Tahoe Keychain

Colour change at 3mm can be done without mmu

Pobrania
283
Polubienia
29
Ocena
5
P
PrintablesGokburt

Low poly mini shoehorn - shoe horn

Start your day with something unique! I made a low poly version of a mini shoehorn, that I think looks cool. It works surprisingly well, and it's as easy to use as the original :) I printed it in PLA. Slicer settings : 0.20mm layer height…

Pobrania
261
Polubienia
57
Ocena
5
P
PrintablesNeva

Shoe dryer (no supports needed)

no supports needed, just use some brim

Pobrania
260
Polubienia
100
Ocena
5
P
PrintablesKmanSweden

Ooni Karu 12" shoes

Shoes to help keep your Ooni Karu pizza oven from not slipping off the table. I'll use doublesided tape and a screw to fasten. General shape from thing:4629146 by Tom7688.

Pobrania
199
Polubienia
9
Ocena
0
P
Printablesby890 tom

Canon 80D 90D Hot Shoe Cover

Fully wrapped hotshoe cover, 0.15 ply height, PrusaSlicer slicing. No support required, slow printing speed. When pushing in the hot shoe, you will hear a "click" sound, indicating that it has been installed.

Pobrania
180
Polubienia
16
Ocena
5
P
PrintablesHubble

Shoei SRL Neotec 2 GoPro mount

My roommate has the same helmet as me, but a different GoPro. The small session GoPro can easily be side mounted without catching too much wind, and with this mount, my roommate is still able to open the chin guard whilst filming. A…

Pobrania
176
Polubienia
11
Ocena
5

WorkBee CNC router shop-vac dust shoe

A dust shoe for the De-walt (Probably fits others) router on the Workbee CNC router. Requires 8 x 8mm Neo Magnets, 2 x M10 bolts (or threaded bar), 2 M5 bolts, and a brush strip. The 2 M10 bolts or bar are for locating pegs, the screw…

Pobrania
175
Polubienia
24
Ocena
0
P
PrintablesOzRocky

Tripod Coldshoe

My camera’s remote receiver normally mounts on the hotshoe of the camera, which is fine and good unless you also want to mount a flash or flash transmitter. When I’m doing product photography, I usually have the camera tripod mounted and…

Pobrania
175
Polubienia
39
Ocena
0
P
PrintablesERiK004

Rode wireless go hotshoe 90° switch

I adjusted it for the camcorder. So I redesigned the hotshoe and added a little more space for the Wirelesss GO II. Thank him for his work! Upravil jsem to pro videokameru. Takže jsem předělal hotshoe a přidal trochu více místa pro…

Pobrania
174
Polubienia
30
Ocena
5
P
PrintablesExtra Fox

Cold Shoe Light Stand

I got a light box to see if that would help with taking pictures of the things I make. Whether it's helping is surely debatable, but that doesn't stop me from wanting to find ways to make things for it. I already had a small light-panel…

Pobrania
170
Polubienia
39
Ocena
5
P
PrintablesdeSteini

Canon Speedlite Flash Hotshoe Cover

Protection cover for Canon Speedlite series' hotshoe Successfully tested on: Canon Speedlite 430EX III-RT Canon Speedlite 470EX-AI Canon Speedlite 600EX II-RT

Pobrania
154
Polubienia
27
Ocena
5
P
PrintablesFerTech

DJI OM4 - Cold Shoe Mount

I needed to mount my Rode Microphone Go 2 transmitter in the DJI OM4 gimbal, but it doesn't have a cold shoe mount. I searched everywhere and couldn't find a nice and easy adapter so I created one quickly on Tinkercard (sorry I am not a…

Pobrania
153
Polubienia
23
Ocena
5
P
Printablesdeluc

Shoelaces lacing system

Years ago I backed a kickstarter project that sold those shoe things where I didn't need to bind them anymore and make them look better. Now I recreated them because I used all of them. After installing them you can cut your shoelaces :)…

Pobrania
145
Polubienia
38
Ocena
5
P
PrintablesRaymond Ernst

Pentax Flash Hot Shoe cover

Cover for all pentax dlsr cameras, with a fixed hot shoe

Pobrania
144
Polubienia
5
Ocena
5

Kid's Shoe Measurement Device

This is a print in place design for a tool to accurately size kid's shoes. It is as large as can be printed diagonally on a Prusa Mini+. Supports are required only under the slider in the circular cut outs. Either use a sharpie to color…

Pobrania
132
Polubienia
18
Ocena
5
P
PrintablesJirka B

Shoehorn half-moon hanger

Simple shoehorn hanger. Two variants - one with hole for screw and second one without it. Recommended print settings Resolution: 0.15 Supports: No

Pobrania
124
Polubienia
11
Ocena
0
P
PrintablesFrogg

Very very tall monster high doll shoes

Monster high doll shoes, 136.982 mm tall

Pobrania
121
Polubienia
18
Ocena
0
P
PrintablesLeo

1/4 inch to hotshoe adapter

Small adapters are lifesavers, anytime. This adapter screws onto a ¼ inch camera mount and converts it to a hotshoe. So now you can attach all your hotshoe accessories to any camera mountable tripod or stand. I needed to mount a LED light…

Pobrania
116
Polubienia
23
Ocena
0
P
Printablesa123qwertz567

Remix of Leifheit Click System Holder by DirkHoefle

I wanted to store some of my Leifheit cleaning equipment on a wall or under a cupboard. So i searched for printable mounts. I found the mount provided by DirkHoefle and printed it. Unfortunately it broke for me on second use because PLA…

Pobrania
115
Polubienia
9
Ocena
0
P
PrintablesMacbambi

Mobile Schuhlüfter - Trockene Schuhe unterwegs. Mobile shoe dryer ->USB<-

English see below. Es gibt nun auch ein Variante für flache Straßenschuhe, siehe Remix . Ich habe mich immer darüber geärgert, wenn ich unterwegs nach einem langen Marsch oder einen Lauf im Regen feuchte Schuhe hatte. Im Hotel findet man…

Pobrania
110
Polubienia
40
Ocena
0
P
Printableslargenlarsen

Bed Bug Stopping Bed Leg Shoes

I helped an organization with around 100 apartments located in TN & KY find a way to stop bed bug spread. Limited research shows that devices like this help to stop the spread, and maybe even kill them off. Supposedly bed bugs like…

Pobrania
103
Polubienia
7
Ocena
0
P
Printablescrashkg

Shoe Stretcher Plug

Use these plugs in your shoe stretcher to help areas that are tight in your shoes. Print with the plug facing up and use brim. Happy Printing!

Pobrania
98
Polubienia
11
Ocena
0
P
PrintablesThunfischToni

Shoe Stacker

This is my attempt at designing a supportless shoe stacker with low filament usage. PLA compatible! I plan to play around with the thickness of the walls/ceiling, to see how low I can go before it gets unstable. I also want to make a…

Pobrania
97
Polubienia
11
Ocena
5
P
PrintablesCG0072

X-Carve Dust Shoe glass

A model to exchange the glass in the Dust Shoe.

Pobrania
80
Polubienia
11
Ocena
0
P
PrintablesSJM

Hot Shoe Cover for Canon EOS APS-C DSLR to work with internal flash

Fix for the still not fitting version. Now working for DSLR like 80D,70D,60D,… Settings Value Infill 15% Perimeters 2 Layer Height 0.20 mm Material PETG (PLA) Supporting Material only on surface / bed Comments printed on MK4 with MMU3…

Pobrania
74
Polubienia
6
Ocena
0
P
PrintablesJadozub

Volantex Phoenix SpeedyBee F405 Wing Mini FC Top Plate & Wobbly Wing Fix

This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…

Pobrania
74
Polubienia
6
Ocena
0
P
PrintablesThrorin

3D Baby Shoes - Sugar Paste Cutter (Fondant) for decorating cakes.

This is a Cutter - Engraver i made for a Pastry Chef i made a few years ago. She wanted to decorate a birthday cake with 3D Baby Shoes made out of Sugar Paste (Fondant). There are 6 pieces that cuts sugar paste and combining all pieces…

Pobrania
65
Polubienia
13
Ocena
0
P
PrintablesKPV

HDZero Goggle Rail Cold Shoe Mount

Addition for the HDZero Goggles, to add a cold shoe mount via the front rails. Enables you to use cold shoe compatible microphones such as the Rode VideoMicro. There are two files, as the cold shoe mount is rotated 7.5 degrees relative to…

Pobrania
51
Polubienia
1
Ocena
0
P
PrintablesJadozub

Volantex Phoenix V2 Replacement Motor Mount

The original motor mount for Volantex aircraft is crap, as any collision motor first cuts it clean off the rest of the fuselage. This motor mount replaces the entire nose section, providing strong support of the motor and better cooling.…

Pobrania
51
Polubienia
1
Ocena
0
P
PrintablesFuturaprint

The Windshield De-icing Scraper: Power and Efficiency Inspired by a Backhoe Shovel!

Dive into the world of de-icing with this unique windshield scraper! Inspired by the robustness of a backhoe shovel, this scraper is designed to tackle the toughest winter conditions. Its ingenious design offers an extended de-icing…

Pobrania
49
Polubienia
12
Ocena
5
P
Printables3DJG

Lucky horseshoe Tensegrity

I hope riding this tensegrity brings you good luck, pal! Printing with 2 perimeters gives good results. I recommend using supports as seen in the image. The pieces fit together tightly, but depending on printing tolerances you may need…

Pobrania
49
Polubienia
8
Ocena
0
P
PrintablesJP

SHOEI GoPro Shin mount (no glue)

You just need to plug it into the lower small air vent of your SHOEI helmet (all newer versions seem to have the same front and air vents. As shown i jused the SHOEI TC-10. For easy removal you just need to press the sides close to the…

Pobrania
49
Polubienia
6
Ocena
0
P
PrintablesFalco

IKEA Shoehorn holder.

Filament : GST 3D. Pla+ Support : None. G code. with All top-Ironing.

Pobrania
48
Polubienia
6
Ocena
0
P
PrintablesM. Vávra

Háček na lžíci na boty (Shoehorn hook)

Můj první vlastní model. Potřeboval jsem háček na lžíci na boty místo hřebíčku. Oproti obvyklým háčkům je plochý a zahnutá lžíce na něm lépe drží. Na spodní straně má 0,5mm drážku pro 19mm šírokou oboustrannou lepící pásku. Nakonec jsem…

Pobrania
44
Polubienia
4
Ocena
5
P
PrintablesPeter Farell

Phoenician Openwork Furniture Plaque with a Horned Griffin.

Phoenician Openwork Furniture Plaque with a Horned / Winged Sphinx / Griffin : Restoration This piece is a famous Phoenician / Neo-Assyrian carved ivory furniture inlay from the Nimrud Ivories collection. In museum catalogs (such as The…

Pobrania
42
Polubienia
13
Ocena
0
P
PrintablesMacbambi

Improved Shoe Dryer - Verbesserte Schuhlüfter

Whenever I'm out and about and my shoes get damp, I'm grateful for these shoe fans. They dry my shoes quickly. After three years of experience with these shoe fans, I've only received positive feedback. For this model, I've made some…

Pobrania
36
Polubienia
29
Ocena
5
P
Printablesbriancmoses

Hotshoe Mount for Microphone Arm

I designed a hotshoe adapter for my Neewer NW-35 Pro Microphone Stand so that I could store my Zoom H1N recorder on the microphone arm. In addition to this model a 11-12mm M3 bolt is used to hold the hotshoe adapter in place. This is a…

Pobrania
35
Polubienia
7
Ocena
0
P
PrintablesMaladaptive

Tecumseh Snowthrower Skid Shoes

Skid shoes for snow throwers that have 2.5" spaced mounting holes. Reversible once one side wears out. Can be used to replace worn out skids or instead of stock metal skids to prevent scratching your driveway/patio material. Material:…

Pobrania
34
Polubienia
5
Ocena
0
P
Printablesaith53

Shoe cabinet stopper / Fijacion tope para zapatero

Stopper for shoe cabinet Measures: Inner width 8 mm Inner height 11 mm Outer width 10 mm Outer height 16 mm Total height 27 mm Printed with PLA+, without supports, 235º nozzle, 65º bed, 200mm/s speed. Fijación tope para zapatero Medidas:…

Pobrania
31
Polubienia
6
Ocena
0
P
PrintablesHallender

Topographical Map of Northstar Resort at Tahoe, CA

My family goes to Northstar every winter as my kids are in the ski/snowboard teams there. Always wanted to have a topographical map of the resort. =) Obtained the data from https://touchterrain.geol.iastate.edu/main. BTW, the print file…

Pobrania
30
Polubienia
4
Ocena
0
P
PrintablesDoctaylor

IKEA Ställ shoe cabinet peg

Replaces broken or damaged ikea Ställ retaining shoe cabinet bracket pin peg. Printed at 45 angle with 5 layer walls

Pobrania
26
Polubienia
3
Ocena
0
P
PrintablesDracoMalfoy

Shoe Stars

Bling out your shoes with shoe stars!

Pobrania
25
Polubienia
11
Ocena
0
P
PrintablesIbixPrint

Shoe eyelet reinforcement

The laces on my shoes where a bit too good and cut into the fabric. So I designed these reinforcements which reinforce the hole and have a lace guide to guide the pressure to the foot.

Pobrania
23
Polubienia
4
Ocena
0
P
PrintablesSJM

Shoei Mount for GoPro Helmet Gen 3 (Neotec 3, GT-Air 3, J-Cruise 3) for right side Helmet Accessories Connector (1 of 3)

Shoei Gen3 GoPro Mount for right side Helmet Accessories Connector. Print-in-place. Generation 3 Helmets are: Neotec3, GT-Air3, J-Cruise3 https://www.printables.com/model/1832676-shoei-vertical-mount-for-gopro-adapter-helmet-gen…

Pobrania
22
Polubienia
4
Ocena
0
P
Printablesmeagerfindings

Monitor Paper Holder Mount (Cold Shoe)

I often transcribe my handwritten notes to Obsidian and wanted a way to not look down at my desktop. Now I can clip notes to my screen. This clip is shown with the wonderful Photo Clamp which has 3 cold shoe attachments on it.

Pobrania
21
Polubienia
4
Ocena
0
P
PrintablesPaulo

Laser Rangefinder Cold-shoe Holder

I wanted to have a mini laser rangefinder to carry along with my Zeiss Ikon Nettar and I didn't want to use the included mini strap, so I designed it to hold it and use it at the same time to properly focus the camera. My design was based…

Pobrania
19
Polubienia
3
Ocena
0
P
Printablessukangorok

Hotshoe Adapter for The Modular Mini Tripod

Hotshoe adapter that bolts into the base plate of the modular mini tripod. The photo and the model is different because I figured after printing that the sides are not really needed. I cut it from the model to save printing time and…

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesSJM

Shoei vertical Mount for GoPro Adapter Helmet Gen 3 (Neotec 3, GT-Air 3, J-Cruise 3) for right side Helmet Accessories Connector (2 of 3)

Shoei Gen3 GoPro vertical Clip-Mount for right side Helmet Accessories Connector. Print-in-place. Generation 3 Helmets are: Neotec3, GT-Air3, J-Cruise3…

Pobrania
17
Polubienia
2
Ocena
0
P
Printablessteffanders

Shoehorn wall bracket

We got a new shoehorn which was too to big and too beautiful for the drawer. It is a famous i.e. amazon article which you can get in different length and from different sellers. It must be fixed like a sculpture and easily accessible for…

Pobrania
16
Polubienia
4
Ocena
0
P
Printableshaavardok

Velbon DF 50 Shoe Wall Mount

Background This christmas my father got a Bosch Cross Line Laser that could be fitted to our tripod that my parents bought with a SLR camera to take the obligatory christmas photos. We needed some neat way to store the cross line laser,…

Pobrania
16
Polubienia
3
Ocena
0
P
PrintablesAlvomane

Shoehorn Holder for 34mm Railing Tubes | Schuhanzieher-/Schuhlöffel-Halter für 34mm Geländerrohre

These are three different shoehorn holders for mounting on 34mm tubes. Two M3x10 screws with a maximum head diameter of 5.5mm are required for mounting. The 27mm wide version in particular fits perfectly for a widely used strongly curved…

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesZotrax

Shoehorn holder for lobby cabinet

If you have shelf holes in your lobby cabinet, this is for you. Step-file included, if hole size is not 5mm.

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesPomi

Stopper for a tilting shoe rack (Sconto).

Printed using PLA with 4 perimeters. Use superglue to bond the plate and the pin.

Pobrania
12
Polubienia
8
Ocena
0
P
Printablestom

Wandhalterung für Radschuhe mit SPD Platten/ Wall mount for cycling shoes with SPD cleats

Mit dieser Halterung könnt ihr eure Radschuhe an die Wand hängen. Ich habe darauf geachtet, dass sich die Schuhe einfach einhängen lassen. Die Halterung wird mit 2 Senkkopfschrauben mit einem Durchmesser von 3 mm befestigt. Ich selbst…

Pobrania
10
Polubienia
2
Ocena
0
P
PrintablesMuad´Dib

Krytka saněk blesku (Hot shoe cover)

Krytka saněk blesku. (Hot shoe cover).

Pobrania
10
Polubienia
4
Ocena
0
P
PrintablesGFS

Cold shoe witch lock. Quick assembly: cable-tie handle or neodymium magnets.

With an additional latch, the cold shoe will better secure your accessories. Cold shoe witch lock. Mounting primarily on mobile devices, where vibrations can cause the mounting screw to loosen. Mounting photographic accessories such as…

Pobrania
10
Polubienia
6
Ocena
0
P
PrintablesYamiGhor

VanShoes

Are you tired of stinky shoes inside the Campervan? Are you tired of leaving outside and put on your weat shoes because the puddle of the night rain? You don't want insects on your shoes? NO PROBLEM! You can install the VanShoes to your…

Pobrania
10
Polubienia
3
Ocena
0
P
Printablessezar2022

Drinking cup with expensive shoes

To asemble this get 2 shoes and glue stick shoes whatever your want position

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesQuantumStellar

Shoelace Charm 4 piece

Lace Tag Shoelace Charm glock spice up your shoes with these!

Pobrania
8
Polubienia
2
Ocena
0
P
Printables3DPrint68

Rond de serviette Phoenix

Rond de serviette Phoenix multimateriaux

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesSJM

Shoei horizontal Mount for GoPro Adapter Helmet Gen 3 (Neotec 3, GT-Air 3, J-Cruise 3) for right side Helmet Accessories Connector (3 of 3)

Shoei Gen3 GoPro horizontal Clip-Mount for right side Helmet Accessories Connector. Print-in-place. Generation 3 Helmets are: Neotec3, GT-Air3, J-Cruise3 Vertical Version:…

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesChorchie

Cold Shoe Monitor Mount for homemade teleprompter

This model is designed to use this monitor from Amazon: https://a.co/d/0rkTGwB And this cold shoe adapter: https://a.co/d/13R9GcO I use this phone tripod mount to hold the phone and to provide the front cold shoe to hold the monitor…

Pobrania
5
Polubienia
0
Ocena
0
P
Printablesquattro

Headphone Shoehorn

Those headband headphones are phantastic. However.. The fabric gets dirty over time and has to be washed. Of course without the electronics. Taking them out is easy, getting the speakers back in is hard. This tool helps to put the…

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesJed LaRue

Skateboard Shoelace Armor

Wanted to protect my shoelaces from the grip tape of my skateboard. Printed in PETG to be strong and slightly flexible. Slide the shoelace saver along the lace while guiding the lace inside to attach easier.

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesJordi

Shoe organizer

Organizer for shoes. 2023-02-17 Added versions with holes that should print fatser and use less material. 2023-02-26 Added a version of the model without a base.

Pobrania
24 922
Polubienia
8597
Ocena
4,93

Crocs Shoes - Fully 3d-printed

Fully 3d printed crocs shoes “CrocsL/R” and “Holder” printed with Overture TPU ( https://amzn.to/40n8I0D) (390 g) for the shoes I used: 2 walls 15% infill (gyroid) for the holder 2 walls 5% infill (monotonic) “Mount1/2” printed with PLA…

Pobrania
24 129
Polubienia
3527
Ocena
4,87
P
PrintablesBowedFurball

3d printed Running Shoes

3d printed running shoes that you can wear Use TPU filament

Pobrania
18 515
Polubienia
2527
Ocena
4,4
P
PrintablesAlbeart3D

Mini Shoe Horn (Last meters | no support)

Mini compact shoe horn to clip on your shoes and protect them, easy to to print and slip in!

Pobrania
12 021
Polubienia
2520
Ocena
4,97
P
PrintablesPrintThatBoii

Cute Christmas tree with shoes

This is a scalable Christmas tree with shoes because everything is better with some shoes and a face XD. The first tree is at scale 75% the middle is at 100% and the right one is at 50%. You can go bigger if you want. note that the…

Pobrania
8867
Polubienia
2277
Ocena
4,95
P
PrintablesCarWalkerMail

Air Jordan One / 1 - Finger Shoe

Finger diameter at base is 17 mm. Scale a model so that it suits your needs! High Quality OBJ - mm

Pobrania
7848
Polubienia
750
Ocena
4,85
P
PrintablesPhD3DP

shoe horn | no support

Shoe horn design taught by Kevin Kennedy Except the side is cut flat and chamfered for no-support 3D printing. One reason to add yet another shoe horn is that the exist ones are either too short or need support or need post processing.…

Pobrania
7082
Polubienia
622
Ocena
4,97
P
PrintablesCalebTimoteo

Cute Christmas tree with shoes (print in place)

Completely print in place. No breaking it loose, no supports. Added a tree with a star and an ornament tree Nozzle: 0.4mm Layer: 0.2-0.28 (Recommended) Scale it as you like :) Legs from the famous Zou Ghost model by Tower of Creation!…

Pobrania
7027
Polubienia
1404
Ocena
4,86
P
Printables3D Print Life

Waverrior - 3D Shoes

Waverrior - 3D Shoes by Dhafinrezky on Thingiverse

Pobrania
6309
Polubienia
1015
Ocena
4
P
PrintablesMZ4250

Phoenix

Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…

Pobrania
4741
Polubienia
379
Ocena
4,75
P
PrintablesHeber

Barbie Doll Shoes

This pair of Barbie heels began as a special request from my granddaughter, who wanted new shoes for her collection. Choose your favorite color and scale the model in PrusaSlicer to fit your doll’s foot size. Printing Instructions…

Pobrania
4713
Polubienia
301
Ocena
4,69
P
PrintablesMZ4250

Dragon Phoenix

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Pobrania
4009
Polubienia
620
Ocena
4,69
P
PrintablesVinors3DLab

Side Lace Lock – No‑Tie Shoelace Holder for the Last Eyelet

A lightweight, ultra‑compact and efficient system designed to lock your shoelaces without tying a knot . These side lace locks attach directly to the last eyelet of your shoe (one on each side) and guide the lace through a multi‑stage…

Pobrania
3991
Polubienia
1637
Ocena
5
P
PrintablesC1RKT

Rugged Shoe Clip Hangers

A supper strong option to keep your footwear off the ground! This shoe hanger is designed to fit most shoes including your flip-flops! Here's a cool cost-effective remix by @PRIma:…

Pobrania
3623
Polubienia
1780
Ocena
4,97
P
PrintablesFabioGhiro

Fast Shoes Organizer

NEW VERSION AVAILABLE! Thank you very much for your feedback. I’ve created version 2 of this shoe organizer, which now features a clasp to keep the top in place. Keep writing for more suggestions! ADDED MK4 PROFILES! (slower than a…

Pobrania
3441
Polubienia
1502
Ocena
4,88