Wyniki wyszukiwania: holes

Sortowanie

2931 modeli

P
PrintablesSovey

Saddle Ruler Square with marking holes for woodworking inches

This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…

Pobrania
1970
Polubienia
701
Ocena
5
P
PrintablesThebigfoot

Shimano XT 4 pistons brake bleed block 21 holes

Since was almost impossible to find a bleed block for my Shimano brakes I've checked the measurements of the original one and printed it. Works great! Print and check thickness should be between 10 and 10.2mm to get regular bleeding of…

Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
841
Polubienia
47
Ocena
5
P
PrintablesIgnacio Vidal

Oddish Planter Eyesmile drain with holes

Hi, this is just a remix of the magnificent work done by the original creator. I've just add some holes on the bottom of the pot to drain the excess of water (when the pot is in the exterior) I've printed in 0.28 layer Hight. No supports…

Pobrania
351
Polubienia
40
Ocena
5
P
PrintablesSirHair

Viking Horn with Holes for Hanging around Neck

Great Viking Horn from @MoyYep, but added holes so my son could hang it around his neck during field day. Check MoyYep's description for more info https://www.printables.com/model/443011-viking-horn

Wydruk około 8,50 €–10,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
175
Polubienia
32
Ocena
5
P
PrintablesDaveDude

Adjustable cap to close openings and holes self-holding (e.g. sink) / Verschluss für Öffnungen

Sometimes you just have a whole that needs to be covered. Easy solution. Use this print, re-size it and done! For me it was a little gabe in my sink that annoyed me for years…finally i fixed it and was wondering how many of you just need…

Pobrania
148
Polubienia
13
Ocena
5
P
Printablesatkianth

'Gem Rock' Mount for Your Articulating Dragon with Filled in Holes and Infill Added

I was having trouble getting this to print without infill using Overture PETG rock white. The bridging that was happening on the light holes were also giving me trouble. Since I wasn't planning to put lights into the bottom, I added some…

Pobrania
119
Polubienia
13
Ocena
4,5
P
Printables3Dprintfun

US Amazon Prusacaster Four Mounting Holes

This is the kit you will need to purchase for printing this: Fistrock DIY Electric Guitar Kit Beginner Kit It shows 3 holes for the bridge on the Amazon page, but it is four. Story The Prusacaster was always one of my dream 3D printing…

Pobrania
97
Polubienia
16
Ocena
0
P
Printablessh

Metal board hook (with squared holes) - which fits in provided lock hole (use this negative into any object, which you want to hang).

UPDATE 13.1.2022: added bigger version, no support needed, better hook stability When: when you have metal board with squared holes when you want to hang on it any of your prints especially when your print has its back side printed as…

Pobrania
96
Polubienia
6
Ocena
0
P
Printablesxro

Oral-B CrossAction Travel Toothbrush Cover with air-holes

Best printed with higher layer height for speed but anything works. I printed with 0.6mm nozzle at 0.3mm layer height in PLA on a water-patterned PER printbed and painted-on organic supports. Supports are required and pre-added in the…

Pobrania
49
Polubienia
9
Ocena
0
P
PrintablesMolot

Trindet Power Inlet 42×27 mm with 50 mm spaced mounting holes

Voron Trident skirt option to fit the Shurter 4302.2001 and other inlet options with 50mm spaced m3 mounting holes. Use washers and nuts, this model is not designed to fit heatset inserts as the forces when plugging and unplugging cable…

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesLincoln Beuster
Pobrania
16
Polubienia
3
Ocena
0

Mid-Century Modern Planter Pot, with Drainage Holes, Drip Tray, Multiple Sizes

(2.0) Update: New versions to counteract the “benchy hull line” If you're not sure what I mean by “benchy hull line”, read this article. I have rounded out the bottom interior of the planter to counteract the slight layer shift our…

Pobrania
17 954
Polubienia
5097
Ocena
4,97
P
Printablesraykamp

Prusa i3 MK3s black PSU replacement frame brace with M4 bolt holes

This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…

Pobrania
11 350
Polubienia
450
Ocena
4,94

Modern Trio Planter, with Drainage Holes, Drip Tray

Update: I have uploaded a revised version of this model that decreases the angle on the curve on the bottom of the planter to improve print quality on the overhang. This revision also improves the tolerances on the tray so the planter…

Pobrania
8136
Polubienia
3730
Ocena
4,96
P
Printablesquibeck

Boomerang V4 better aerodynamics (no holes)

Ultralight High-Performance Boomerang V4 (No Holes) The upgraded V4 edition of the iconic ultralight boomerang, engineered for maximum flight stability and impressive range! Weighing in at under 18 grams , this high-performance boomerang…

Pobrania
5415
Polubienia
911
Ocena
4,53
P
PrintablesMcLovin

Cabinet Door Spray Bottle Holder (no holes/adhesive)

Print Settings: No supports needed (as long as your printer can handle bridges fine.) Layer height : 0.32mm (you could go lower, but thicker layers will make it stronger) Walls : minimum 3-5 Infill : doesn't matter; anything >10% should…

Pobrania
4963
Polubienia
3121
Ocena
4,87

Aztec Pattern Debossed Planter Pot, with Drainage Holes, Drip Tray

This Aztec Pattern Planter is the perfect size for any small to medium cacti, succulent, or other houseplant. The design includes a series of drainage holes, as well as an optional, custom-fitted drip tray. The default size of the planter…

Pobrania
4847
Polubienia
1363
Ocena
4,95

Aspire Planter with Drainage Holes and Drip Tray

Aspire Planter: The Aspire Planter is the perfect size for small to medium sized houseplants, succulents, or cacti. The planter features built-in drainage holes and a drip tray that is perfectly contoured to the bottom of the planter,…

Pobrania
4035
Polubienia
1200
Ocena
4,94
P
PrintablesCrosslink

IKEA Skadis Wall Panel with standoffs, 6x6, 5x5, 4x4 holes and other sizes

IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…

Pobrania
3173
Polubienia
843
Ocena
4,67
P
PrintablesBababbak
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
3083
Polubienia
1092
Ocena
4,5
P
PrintablesTache

Gridfinity Hex Bit Holders with Larger Hex Holes

Other hex bit holders that I have tried were too small for all my miscellaneous bit's widths, so I have made better holders. These models are for hex bit holders which have larger 6.6 mm, 6.7 mm, 6.8 mm, and 6.9 mm hex bit cutouts. I am…

Pobrania
3032
Polubienia
455
Ocena
4,95
P
PrintablesMik3D

Fat Hamster with Key chain holes

Layer Height 0.2 Wall loop 3 No Supports Infill 5% Size can be adjusted

Pobrania
2708
Polubienia
368
Ocena
5

Classy Stand Planter - Mid-Century Modern Style Planter - with Drainage Holes - Drip Tray

Update: v3 Release All three parts of the planter have been updated for this release. The main change is to the drainage pot. Now, the interior overhang is much less steep, enabling printing without supports ! The bottom interior surface…

Pobrania
2474
Polubienia
1330
Ocena
5
P
Printablesbw3dp

Parametric, stackable PCB standoffs (M2-M14 holes)

These are fully-stackable PCB stands and hole gauges. I made three step sizes, 1mm, 2mm, and 3mm. The peg diameters go from M2-M14 (M2, M2.5, M3, M4, M5, M6, M7, M8, M10, M12, M14), and have a 4x step base. These are great for putting…

Pobrania
2349
Polubienia
1123
Ocena
4,91
P
Printablesjanth

Universal Plastic Lid Hanger/Holder (IKEA 365+, Lidl, No Brand, etc.) without Screw Holes

For detailed information, please check the original model . Please only comment here regarding the missing screw holes; anything else should be commented with the original model here .

Pobrania
2153
Polubienia
907
Ocena
4,63
P
PrintablesDohara

Bone Dragon Keychain with 2 holes

Bone Dragon Keychain with 2 holes Print in place No supports needed (but can help) Please "Like", review and upload make. I spend a lot of time designing and allow it all to be used for free (including commercially). If you'd like to help…

Pobrania
2125
Polubienia
355
Ocena
4,85
P
PrintablesDamo T

Bambu Lab x 5 Build Plate Holder. With and without hexagon holes

This is my first upload (please be kind) a model of a build plate holder i designed for 5 plates in Solidworks and printed it on my Bambu X1 Carbon in PLA. It fits the all the Bambu plates PEI, textured etc. It also fits the Prusa (MK3s+)…

Pobrania
1424
Polubienia
160
Ocena
5
P
PrintablesSovey

Saddle Ruler Square with Metric marking holes for woodworking

This Metric saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking…

Pobrania
1402
Polubienia
457
Ocena
4,86
P
PrintablesSrg_Whoopsie

SKR Mini E3 V3 With Mounting Holes

simply modified the pcb in the supplied step file from bigtreetech to include the mounting holes, as shown in the 3d pdf file they supply. i was unable to work out how to keep the coloring, everytime i exported to obj itd fail, so i added…

Pobrania
1315
Polubienia
49
Ocena
5
P
PrintablesValhalalala

[REMIX] Stone Pillars for Gloomhaven with 6x3 magnet Holes for Maghex

All I did was add holes in the bottom of Robagon 's and liquidlogic 's pillars for 6x3 magnets to use them in Xevin 's MagHex Gloomhaven Tile System (links below) but other magnetic systems will work too. It was an easy and fast edit on…

Pobrania
1281
Polubienia
295
Ocena
4,83
P
PrintablesScubaSteve

Paper Towel holder Remix with Screw holes

The holes are sized for standard US grabber screws. “Softened” the look required some minor changes to the hex pattern.

Pobrania
1275
Polubienia
243
Ocena
4,92
P
PrintablesBart_Pe

Pistachio bowl with holes

Cubic / Grid infil - 10% Wall loops 4 Surface pattern - monotonic lines Layer heigh - 0.2

Pobrania
1226
Polubienia
142
Ocena
4,86
P
Printablesspdwalrus

Mushroom Shelf magnet with 6x3mm magnet holes

Mushroom Shelf magnet with 6x3mm magnet holes

Pobrania
1209
Polubienia
300
Ocena
4,75
P
PrintablesLorenzo Codena

Helical Self Watering Pots with draining holes

ENG: This pot can be used both as a self watering pot and as a classic pot with draining holes but with a modern design cover pot, since the bottom of the internal pot doesn't touch the one of the cover and allows the water to drain,…

Pobrania
1134
Polubienia
180
Ocena
5
P
PrintablesBoogie

Samsung Galaxy SmartTag 2 bicycle case for bottle mounting holes

Samsung Galaxy SmartTag 2 bicycle case for bottle mounting holes. I recommend 100% infill. Case height: 12 mm

Pobrania
1111
Polubienia
124
Ocena
4,5
P
Printablesthipilopo

Telecaster guitar with hexagonal holes

A fully printable Telecaster with a hexagonal pattern in the body. The guitar is the same size as a normal Telecaster, so normal parts fit. All the parts are connected with pegs and glue, so no tools are needed. Printing All parts are…

Pobrania
1110
Polubienia
259
Ocena
4,8
P
Printablesthall72

Lego Compatible (32000.dat) Technic Brick 1 x 2 with Holes

This model is compatible with the lego system.

Pobrania
1103
Polubienia
56
Ocena
4,25
P
Printablespjvenda

Wago 221 Inline Junction Box for flex wire 2, 3, 5 and 5 core with screw holes

Electrical safety warning: Messing with electrics is dangerous and kills. Please don't attempt to use this junction box if you are not familiar with electric safety procedures and regulations in force in your country. Your safety is not…

Pobrania
1071
Polubienia
507
Ocena
4
P
PrintablesAdam L

Mini Hinge Gear Assortment, PrintInPlace, Countersunk Holes

Note: Picture shows one size, but all 3 sizes from the original post have been adapted for countersunk holes and are included in the 3MF/STEP files. I love the strong and clever design of these hinges that @ESoderberg came up with,…

Pobrania
1070
Polubienia
379
Ocena
5
P
PrintablesMarekZeman91

Bambu AMS Disconnect Tool (remix: no text, no holes)

Bambu AMS Disconnect Tool remix without text and holes

Pobrania
1019
Polubienia
57
Ocena
4,95
P
Printablesensoniq2k

Fully enclosed MMU2 wheel buffer with screw holes and PTFE clamp

For my printer enclosure I needed something with screw holes so I added some. Also I designed a clamp for the PTFE tubes so they won't get sucked in. Just use a M3 10mm screw and a hex nut (there should be enough in the MMU2 spare parts…

Pobrania
1008
Polubienia
88
Ocena
4,67
P
Printablesthall72

Lego Compatible (3701.dat) Technic Brick 1 x 4 with Holes

This model is compatible with the lego system.

Pobrania
951
Polubienia
57
Ocena
4,67
P
PrintablesJeepingJohnny

Soap dish - With and without drain holes.

Some people have asked me for a drain version. I have added two versions. With and without drain holes. I suggest you use rubber feet like these for the one with drain holes. So, it has some elevation to drain out the bottom. AUSTOR 318…

Pobrania
901
Polubienia
87
Ocena
4,94
P
PrintablesOverMaintained

Metric Ruler with Measuring Holes

Print your desired color for the body, then change filament at the last 0.3mm to make the labels stand out.

Pobrania
901
Polubienia
71
Ocena
4,78
P

Gravity Broom Holder with Vertical Screw Holes

Decided to remix my remix and make the original gravity broom holder but with through-holes for screws vertically aligned to anchor into a wood wall stud (or whatever vertically aligned anchoring medium you want!) Made the countersinks…

Pobrania
896
Polubienia
80
Ocena
5

AR-15 Enhanced Trigger Guard with Holes

Enhanced Trigger Guard for the fingy that do the worky

Pobrania
879
Polubienia
86
Ocena
0
P
Printablesfuchsr

Hanging Bird House with Holes for Drainage/Air Flow

A straightforward remix of @TripleGWorkshop 's Droplet Hanging Bird House. I liked it the best of its kind: It's a nice shape that prints easily, has a good-sized front opening and built-in break-away support for the landing perch. What I…

Pobrania
875
Polubienia
149
Ocena
4
P
Printablesjangrewe

The Prusacaster with Guitar Strap Mounting Holes

These are the same parts as provided by the “official” Prusacaster model, just with 4.7mm diameter holes added at the supposedly optimal locations for guitar strap buttons. The seemingly strange diameter of 4.7mm is simply so that…

Pobrania
866
Polubienia
189
Ocena
5
P
Printablesthall72
Pobrania
841
Polubienia
64
Ocena
0
P
PrintablesSvettis

Pliers/Cutters Holder for Pegboard Square Holes CC 38mm

A Pliers/Cutters holder for pegboards with Square 9mm holes and a center-center (CC) distance of 38mm. 6 Holes, each 15x15mm. I printed with a raft so the supports for the pegs would have something to print on.

Pobrania
823
Polubienia
83
Ocena
4,75
P
PrintablesNick14

Prusa mini Handle with speed holes.

My take on a handle for the Prusa mini. Printed from PET or PLA works also. 0.2mm layer heights 4 shells 8 top and bottom layers 30% infill No support needed Requires 2x m6x12mm cap screws and 2x 3030 extrusion T nuts for install. Links…

Pobrania
805
Polubienia
137
Ocena
4,97
P
Printablesthall72
Pobrania
803
Polubienia
72
Ocena
4,25
P
PrintablesBoogie

Samsung Galaxy SmartTag 2 bicycle case for bottle mounting holes

Samsung Galaxy SmartTag 2 bicycle case for bottle mounting holes. I recommend 100% infill. Case height: 12 mm

Pobrania
780
Polubienia
71
Ocena
5
P
PrintablesErer2001

4x 3.5 inch hard drive cage on 140 mm fan mount (Extra holes for Masterbox Q300L/Q500L)

Mount four 3.5 inch hdd on a 140 mm fan mount. The extra 8 holes are for stability and works on Coolermaster Q300L and Q500L cases. Ender 3 v2 0.6 nozzle PETG Category: Computer

Pobrania
764
Polubienia
112
Ocena
5
P
PrintablesZakoplex

Under Desk Drawer with Keeper, Middle Section, & No holes.

Quick remix of Paul's cool Under Desk Drawers with a hidden keeper so it doesn't pull out too far and a no-holes drawer option . All parts fit in a MK4/3 single print. Twisting keeper allows for less fumbles during assembly while still…

Pobrania
755
Polubienia
169
Ocena
5

Stone Pillars Planter Pot, with Drainage Holes and Tray, Icelandic/Nordic Design

See below for important print settings. Inspired by the basalt stone columns located in southern Iceland, this planter features a stone-like texture that captures the natural beauty of Reynisfjara beach. This planter also features a…

Pobrania
745
Polubienia
377
Ocena
5
P
PrintablesOG_3D

DIN A4 Wandprospekthalter mit Bohrlöchern (Wall brochure holder with drill holes)

DIN A4 Wandprospekthalter mit Bohrlöchern (Wall brochure holder with drill holes)

Pobrania
726
Polubienia
37
Ocena
5
P
PrintablesMooseBoys

Filament outlet with PTFE pneumatic connection for Sunlu S2 Dryer with holes for M3 screws (remake)

I re-made JBE's remix of the original connector by Phil-ip with the following improvements: Regenerated from original model without using re-meshing, avoiding geometry noise. Added internal taper to lower part of M10 thread, eliminating…

Pobrania
712
Polubienia
110
Ocena
4,9
P
PrintablesMiklas

desiccant bin for Qidi Box "with smaller holes"

Improved Qidi Box Desiccant Bin – Reduced Hole Size + 3 Variants This is my remix of the awesome silica gel holder originally designed by @R985_3546396 . His model works great and fits perfectly in the Qidi Box — but after printing it, I…

Pobrania
711
Polubienia
66
Ocena
5
P
Printablesthall72

Lego Compatible (3894.dat) Technic Brick 1 x 6 with Holes

This model is compatible with the lego system.

Pobrania
700
Polubienia
49
Ocena
4
P
Printableshotrodclint

EGO String Trimmer Wall Mount with Stud Holes

I printed it in Bambu Lab basic PLA (one of the filaments that came with my P1S). Printed at 20% infill, 4 walls, and the base printed at 100% infill for resistance to flexing when loaded.

Pobrania
687
Polubienia
82
Ocena
4,5
P
Printablesmaxelman

Gridfinity xacto knife holder - with magnet holes

Holds an x-acto knife point-down without a cap for easy grabbing! Optionally holds this blade holder: https://www.amazon.com/gp/product/B00004Z2U0/

Pobrania
675
Polubienia
79
Ocena
4,87
P
Printablesthinkingalaud

Geometric Origami Planter with drainage holes

Remix of Geometric Origami Planter: non vase mode and with drainage holes.

Pobrania
671
Polubienia
76
Ocena
5
P
Printablesmarkury

Mini Laundry Basket with Oval Holes

I couldn't find any decent printable laundry basket designs so I had to make one myself. This one is similar to this irl basket from walmart minus the gray handles: Scale to your desired size and fill it with tiny frogs. Print it upside…

Pobrania
668
Polubienia
76
Ocena
4
P
Printablesaussie-printing

1-5mm. sieves square holes

1mm. 1.5mm. 2mm. 2.5mm. 3mm. 3.5mm. 4mm. 4.5mm. 5mm. Sieves with square holes. 100mm.x100mm. Note:1-3mm. holes are likely going to be printed slightly smaller.

Pobrania
666
Polubienia
28
Ocena
0
P
Printablesatom

Perfect Gridfinity Holes

TL;DR This STL is meant to be used as a Negative Volume modifier to fix Zack's messy, sloppy holes found in the bottom of (nearly) all Gridfinity parts. In your slicer, add this STL to your Gridfinity part(s) as a negative volume .…

Pobrania
653
Polubienia
207
Ocena
5
P
Printablesthall72
Pobrania
643
Polubienia
78
Ocena
3
P
PrintablesGorroth 1007

iPhone 13 Mini Case with Lanyard holes

Made an iPhone 13 Mini Case with holes for a lanyard and some hex design in the back. Print laying on the back in TPU with supports. Once printed i suggest to make a cut underneath the buttons so they can be pressed more easily.…

Pobrania
629
Polubienia
39
Ocena
5
P
Printablessh

🔩 Frame with nuts holes and eyelet for Lockable Contour Gauge

Info: remixed original frame 2 part, so it contains holes for M3 nuts assembly result is then more robust and tough no space between 2 frame parts also added eyelet so it can be hanged other original model parts can be reused

Pobrania
628
Polubienia
67
Ocena
5
P
Printablesaussie-printing

5-10mm. sieves square holes

5mm. 5.5mm. 6mm. 6.5mm. 7mm. 7.5mm. 8mm. 8.5mm. 9mm. 9.5mm. 10mm. Sieves with square holes. 100mm.x100mm.

Pobrania
627
Polubienia
22
Ocena
0
P
Printablesthall72

Lego Compatible (3703.dat) Technic Brick 1 x 16 with Holes

This model is compatible with the lego system.

Pobrania
625
Polubienia
38
Ocena
0
P
Printablestakara

Articulated lizard with holes for magnets

I cut some holes for neodymium magnets with 3 mm diameter and 2 mm thickness. There is only one layer between the build bed and the magnets. It was a tight fit for me, so it may depend on the calibration of your printer if it works for…

Pobrania
613
Polubienia
111
Ocena
4,5
P
PrintablesTyler Bletsch

Pulley generator with hex hole and hub holes support (useful in FRC)

Based on Parametric Pulley Library which in turn was based on Parametric Pulley , this tweak to the old pulley generator adds support for hexagonal holes with chamfer and an array of round holes in a pattern (common on hubs). The creation…

Pobrania
608
Polubienia
37
Ocena
0
P
PrintablesKommander92

MG90S horn 2mm holes

This is a custom-designed servo horn made specifically for the MG90S micro servo . It’s intended for projects that require 2 mm-diameter connections , such as lightweight linkages, control arms, or small mechanical assemblies. Although I…

Pobrania
604
Polubienia
15
Ocena
0
P
Printablesthinkingalaud

Planter 12 - Succulent Life with drainage holes

Planter 12 - Succulent Life, but with drainage holes.

Pobrania
601
Polubienia
111
Ocena
5
P
Printablesthinkingalaud

Dragon Scales Pot with drainage holes

Remix of Dragon Scales Pot: non vase mode and has drainage holes.

Pobrania
600
Polubienia
114
Ocena
5
P
PrintablesUko

Original Prusa Enclosure Double Sheet Holder (M3 Bolt Holes)

Remixed a very nice model, but reduced the number of sheets to 2 (I have 3 in standard rotation: smooth, satin, and tex. Mount directly with 6mm M3 bolts. For mounting point suggestion check the original model explanatory pictures

Pobrania
587
Polubienia
191
Ocena
4,95
P
Printablesthall72
Pobrania
580
Polubienia
32
Ocena
4,5
P
PrintablesFleeeinIan3D

SE3D Elegoo Centauri Carbon Toolhead Cover - Lightened and ∞ Symbol - Holes or Slotted Vents

More Remix Notes: This is of course based off of the very cool: SE3D Elegoo Centauri Carbon Toolhead Cover UPDATE: Please consider downloading this other, latest remix, it is what I was going for initially and the fan mounting is SO MUCH…

Pobrania
579
Polubienia
126
Ocena
5
P
PrintablesSoloo

Camping Tent Rope Fastener Guyline Tensioner Lock 3 Holes Rope Tensioner Camping Accessory

These three hole rope tensioners are great! I couldn't believe this model wasn't already on thingiverse. Use them for any rope. Tents etc. Category: Sport & Outdoors

Pobrania
570
Polubienia
63
Ocena
5

Gridfinity Bins - No Magnet Holes

I don't use magnets in my gridfinity set up so I've started making bins without magnet holes. They print slightly faster and cleaner as there are no spaghetti-filled holes to worry about. I use a minimalistic base but these should work…

Pobrania
548
Polubienia
69
Ocena
5
P
PrintablesSchmidt

Small Vice Body With Mounting Holes

Get the rest of the parts here: https://www.printables.com/model/955648-small-vise

Pobrania
543
Polubienia
226
Ocena
5
P
PrintablesJamesonThug

Mushroom Shelves with 12X3 Magnet Holes

I liked the idea of using these mushroom shelves to use as fridge magnets, but I prefer to use 12x3mm magnets, so I modeled some. I used the origional models as a starting point, repaired, reoriented them, then added the holes. The holes…

Pobrania
541
Polubienia
185
Ocena
5
P
PrintablesDvora3D

Xbox Series S + HDD 2.5" Stand - Circles Holes

New Version: Xbox Series S + External HDD Stand - Clean, Circles and S Patterns by Dvora3D | Download free STL model | Printables.com The model has 4 holes for pads of 19mmX20mm. Maximum area for external HDD (2.5"): 140mmX80mmX15.8mm. If…

Pobrania
531
Polubienia
76
Ocena
5
P
PrintablesYourigh

Hex phone holder + holes for speaker

Remix: * loaded to Fusion360 * adjusted bottom holes - speaker port * Printed with PLA

Pobrania
526
Polubienia
56
Ocena
4,8
P
Printablesthinkingalaud

70's Style Planter with drainage holes

Remix of Pot and planter - 70's style design: non vase mode and has drainage holes.

Pobrania
517
Polubienia
79
Ocena
5

Toilet Paper Holder with Holes for Screws

Great model, but I don't trust tape to hold mine up. Made screw holes so that two #6 or #8 drywall screws can be inserted flush with the design to mount this on a wall. Printed in PLA at 0.2mm on Prusa Mini, bump up to 4 perimeters if you…

Pobrania
516
Polubienia
71
Ocena
5

Flashforge Adventurer 5M Pro 3 holes buildplate handle.

This is a model extracted from the Orca slicer model for the Flashforge Adventurer 5MPro buildplate. Has been modified to use with bigger inserts keeping rigidity, so the buildplate holes need to be drilled to 7mm. I used M3x4x5 inserts…

Pobrania
516
Polubienia
69
Ocena
0
P
PrintablesHitLuca

Modern geometric Succulent plant pot with drainage holes

My usual watering schedule for potted plants is adding water until it comes out from the drainage holes on the bottom. In this case it would be a problem, since the small vases don't have any! I just added them in order to avoid having…

Pobrania
511
Polubienia
77
Ocena
5
P
PrintablesSerpent10i

Gridfinity Base Template with Improved Holes (And Weight Slots - if you want them)

The original gridfinity designs have a small error where a circle is attempted to be printed in mid air while extruding the screw holes area. Without supports this causes both the screw and magnet holes to be unusable without some extra…

Pobrania
500
Polubienia
83
Ocena
5
P
PrintablesBringus Studios

Feet With Screw Holes For Original Xbox

Print in TPU and then hot glue them where the originals were

Pobrania
499
Polubienia
46
Ocena
5
P
Printablesfnese

skull planter no holes

the same model but i sculpted out the holes in blender ( I left the big main one on top )

Pobrania
495
Polubienia
76
Ocena
4,86
P
PrintablesBasementLAB

U-Strap Clamp - 2 Holes 50/60/80/100mm diameter

U-Strap Clamp - Tension Tube Clip Conduits Strap Clamps for Pipe Fixing on Various Surfaces For mounting plain or insulated pipes Dimensions available: Ø 50mm Ø 60mm Ø 80mm Ø 100mm Update: 16/05/2025 added Extra Strong Version 14/11/2025…

Pobrania
486
Polubienia
47
Ocena
5
P
PrintablesGizmoTheKing

Gridfinity Plain Bins (no screw holes)

Standard gridfinity bins modified to remove the screw holes in the bottom for fast printing without supports.

Pobrania
482
Polubienia
27
Ocena
0
P
Printables_KaszpiR_

Gridfinity soldering iron tip holder with locks, 16 holes

About I wanted to have more compact version for more tips with option that tips will not fall off if held sideways or upside down. I took original ‘Bin - 1x1x3 - pmcquay.stl’, added fill and holes with tiny locks inside the holes that…

Pobrania
479
Polubienia
56
Ocena
4,91
P
Printablesthall72
Pobrania
476
Polubienia
63
Ocena
0
P
Printablesetotheipi

Mount for 3x5wire WAGO connectors with mains power labels, holes for Voron DIN clip

Redesign of a Wago mount (from Voron) with embossed labels for my RatRig V-Core-3. It has two countersunk holes 55mm apart for fixing it to Voron's really cool printable DIN clips. I have included the STEP and F3D files so you can modify…

Pobrania
476
Polubienia
79
Ocena
5
P
Printablesebeeche

Prusa MK3 Heatbed Cable Support (Easy Clip On) with holes

It's a very simple print, no special needs other than using supports from the build plate. I used: PETG 0.2 layer height Supports from build plate Print time: 43 mins (non hacked/tuned MK3S)

Pobrania
472
Polubienia
75
Ocena
4,79

Original Lattice Planter - with Drainage Holes and Tray

This planter is designed with the intention of creating a visually attractive design that is also easy to print. The pictured print was done using a 0.6mm nozzle and 0.2mm layer height to save printing time, but it could easily be done…

Pobrania
471
Polubienia
145
Ocena
4,86