1278 modeli
This is a holder for Husqvarna batteries. It will hold and lock the batteries i place so you kan mount it with screws in your car, on the wall, or on the ceiling, and it cant fall out. There are two versions. One for the BLi300 Battery,…
Wydruk około 14,45 €–17,66 € nettoWstępna wycena jednego wariantu
Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieser Halter ist für eine Motorsäge, Heckenschere oder auch andere Geräte gedacht die hängend gelagert werden. Für eine gute Haltbarkeit sollte die Füllung mindestens 80% betragen. Viel Spaß beim drucken. Bitte geben Sie mir noch ein…
Wydruk około 11,33 €–13,85 € nettoWstępna wycena jednego wariantu
Husqvarna keychain. Printed with Prusament PLA standard settings. Colours: PLA Prusa Orange & Gentleman's Grey
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Ground screw for fix Husqvarna automower base https://www.az-shop.cz/cms/fiskars/products/automaticke-sekacky/nahradni-dily/pripevnovaci-srouby-pro-nabijeci-stanici-k-sekackam-automower.jpg
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
A satisfying snap for your Bondhus Hex wrench sets. Pivot case in out our for easy removal. For standard 1" pegboard
Wydruk około 3,14 €–3,84 € nettoWstępna wycena jednego wariantu
Hello, Simple but functional Husqvarna lawnmower cable holder for model LC356VP. I have modelled it after the original part for a friend and I printed it in 100% infill, both PLA, PETG and ABS (wanted to try out all plastics to ensure how…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena jednego wariantu
This remix adapts the original caddy from the HP series servers it was designed for to a Hitachi HUS (Hitachi Unified Storage) SFF 24 bay drive chassis. The drive bays are deeper than typical Dell or HP servers and hard to source (200mm).…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Slightly reinforced and remodelled from scratch to be able to print. PLA, 50% infill. Supports needed and included in gcode. The hole in the middle might require slight filing to sit perfectly on the axle.
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
A remix of Sascha4532's excellent r600 wheel, split into two parts to allow for re-printing of the tyre as and when it wears out. The main wheel body can be printed in PETG or PLA, and the tyre was printed in TPU. You can use m5 bolts to…
Wydruk około 12,89 €–15,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
i like this pushing lawn mower so much, but these small hooks are so so bad. print with petg, no fan and 100% infill.
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Baby Dog Husky Clay character kawaii 3D Model
If this proves popular, I will work on some other Dinosaurs and Prehistoric Creatures,as well as accessories and variants of this model if requested. I could possibly do things like battle wounds, dino-rider armor, a wall mountable bust,…
If you download the model, please don't forget to leave a like. Thank you! <3 Immerse yourself in the graceful world of abstract art with this exclusive 3D print file, featuring a minimalistic interpretation of a Husky. This design…
An articulated dinosaur skeleton with a removable skull. Two Parasaurolophus (duckbill) style skulls are included. Easy to print and should not need supports. Print with 2 or 3 walls @.16 layer height. You may need to add a brim for…
--Updated V2 Available Now!-- Features 3mm alignment pins and better clearance! Use standard nails as alignment pins for more consistent driving. This is a fork seal driving tool for use with 48mm diameter dirt bike forks. This was…
I designed this, because I really wanted one, but only had a small printer. (150x150x150) So I cut it into smaller pieces, and gave it a go! I used Acrylic brown paint, with a black wash. I think it turned out pretty Good!!
In Greek mythology Sisyphus or Sisyphos (/ˈsɪsɪfəs/; Ancient Greek: Σίσυφος Sísuphos) was the king of Ephyra (now known as Corinth). He was punished for his self-aggrandizing craftiness and deceitfulness by being forced to roll an immense…
My Automower has always lacked a bit of downforce on the rear wheels – so I designed this spoiler. It fits perfectly on the lid without interfering with normal maintenance or service. I highly recommend printing the spoiler with the fuzzy…
Longer Version (13.04.2026): Upon request, I created a longer version that is better suited for loose soil. Despite its height, this screw can still be printed on the Prusa Mini. As with all models, no supports are required. Please note…
The “Cute Husky Keychain” features an adorable husky with a friendly expression, this keychain is perfect for dog lovers and anyone who appreciates the loyalty and charm of these beloved pets. Features: Fast to Print: Quickly add this…
This Husky Statue features a sleek and modern design with smooth contours, making it an easy print for most 3D printers. The model is ideal for display on a desk, shelf, or as a thoughtful gift for dog lovers. Best Print Settings:…
Threaded oil funnel to fit most 250, 350 & 450 KTM / Husky / Gasgas motocross bikes. The funnel threads directly into your existing oil reservoir for easier oil refills. Air vent integrated into funnel to allow for fast pours with no…
Edit, 18. 6. 2026: Set the Model to free for all! Happy printing! If you want to support my work and see more FlexiDinos become a Club Member! Edit, 14. 8. 2026: Massively reconstructed the model, improved over all stability and joints,…
This is a remix to fit a utility blade in the “Wrapping paper cutter” by Over_ I have tested Husky blades, and Milwaukee iron-carbide edge blades. The husky ones drop straight in, and the Milwaukee ones are a hair tight, but do fit. The…
I wanted to make my own rendition of Parasaurolophus skull, which was also easy to print. I tried to be accurate when sculpting it, but I'm no paleontologist, so I'm sorry in advance to all the dinosaur experts I might offend with this!…
Background Codenamed Operation Dawn: 13th Dec 2003, American military forces conducted a search at 2 location outside the town of ad-Dawr. At first unsuccessful but a continued search led to a soldier kicking a piece of flooring, exposing…
This is a 2-part snap-together protective case for the HuskyLens AI vision sensor v1.1. The case & camera can be mounted with M3 screws. Holes in front are for bilateral white LEDs, RGB LED and lens. Raised arcs on top protect the control…
Flexi Parasaurolophus dinosaur From 9 vertebrae the dinosaur is very flexible and its movement is smooth and comfortable
https://en.wikipedia.org/wiki/Deinonychus
Flexi Parasaurolophus Dimension de l'objet 128x64 mm épaisseur 12 mm Le Parasaurolophus était un des dinosaures ornithischiens au sous ordre des ornithopodes . Il était bipède et herbivore et vivait dans ce qui allait devenir le Midwest…
My mower got stuck in the slopes in the garden in heavy rain with the original wheels. This is a wheel with more grip than the original due to larger spikes. This is a replacement wheel for the Husqvarna Automower that should fits these…
Amazing husky dog 3d model with alot of details.
Update: I originally posted this model on Thingiverse a while ago, and had updated and added mods for it there but not here. I will eventually move them over to this site, but for now if you want the most current version you can still…
USS Massachusetts, launched September 23, 1941, is a South Dakota class battleship. Massachusetts took part in Operation Torch and destroyed the incomplete Jean Bart. She also fired the first and last 16-inch shells of WW2. Print Settings…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
The old hush, i thought id throw it here after my etsy got nuked and its quite old and outdated, but maybe youll get a kick out of it. takes anything between 4 and 6mm strings and uses worker talon mags, needs a tall buildplate and will…
Small spacers, two different sizes. Printed mine in ABS and it's been hassle free for three years. Excellent throttle control. Undo your throttle and pop them in. It's that easy.
Low poly 3D model of a Siberian Husky. Optimized for games, animations, AR/VR, and 3D printing. A stylized and detailed asset, perfect for pet projects, collectibles, or renders.
Cookie cutter made in the shape of a husky illustration. 3 Versions available with varying indents, depending what you want to go for. Notes: Printed it in PETG with high layer height to get it done fast, should work for all layer heights…
I recently uploaded a version of this, that was sliced into 3 pieces, and I got some requests to make an unsliced version, so here we are! Thanks everyone for your kind words and feedback! *please note, that the photos are from a sliced…
Medieval mace - this is a medieval weapon, widely used during the Hussite Wars. An extension of the great original model with a handle, while keeping the original holes. No need to adjust the size of the original model from @WikiFiser, it…
Articulated Husky Designed by Teal Cat Creative Please support our work and purchase a commercial license via our Patreon if you intend on selling our prints!
A spare wheel for the Husqvarna Automower 305. Since the originals are too expensive I have drawn this replacement. I hope that it is durable and also copes well with slopes. But that will show over time. Rim and profile are screwed,…
Hello everyone, This is my design for a Deinonychus statue. A high-precision model!! I hope you like it. If you have any questions, please feel free to ask. Happy printing!
LABEL TABS ADDED!!! I added models with tabs so that you can put on 1/2" labels for the contents. I also added some clip on labels if you already have boxes printed OR if you want them a different color. The clip on tabs work for the…
If you have a 23+ KTM, Gas Gas or Husqvarna you know removing the new radiator cap is nearly impossible! Works on all 23+ KTM/GasGas/Husqvarna Austrian bikes. Print in PETG, TPU, ASA 100% infill with backing
Filament load/unload issues? MMU2 taking too much space? Not with this Sisyphus Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to almost three revolutions. Use two curved nuts to attach the spool to the…
Revolutionize Your Seed Cleaning Process Tired of spending hours tediously cleaning your harvested seeds? This 3D printable seed separator offers a quick and easy solution that saves time and money using ordinary house hold equipment - a…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Printable scan of a Deinonychus claw.
Husqvarna/Stihl Heckenscheere/Motorsäge Wandhalterung.
TL;DR Found the original on thingiverse and remixed it to be successfully printable without support. The older version needed support under one side of the head. update 2023.0506 added a flat version, to fix the issue at the eyes added a…
New and improved! Some have asked for one that is chamfered and stronger. So here it is. I've also included the f3d file. -------------------------------------- My 701 had the fork cables banging off the forks. Plus I wanted them off the…
Launch pad for Hot Wheels tracks. As you can see on the pictures it is pretty easy to mount. You only need an additional rubber band. We recommend to print GRIP & BOX in PETG and the BOLT in PLA. The grip can be screwed with 2x 10x4mm…
I use the brake line guide on my 2018 KTM EXC F450 which is equipped with a navigation tower for rallye racing. It will fit on all bikes with a similar fork. The updated version is short and got an offset in order to get more clearance…
This is a model to replace a broken or old KTM or Husqvarna side stand base used in enduros (like the EXC) and some motocross bikes. I have uploaded two models, one with a hole in the middle so you can add a standard M8x30 bolt for…
no modifications to drawer required, everything is purely friction fit! and its solid! allows you to divide up the drawers in your husky tool cabinet fusion files included (large printer required due to mechanical requirements of system)…
CHECK OUT MY REMIXES FOR ADDITIONAL VARIATIONS! I've created two variations to add removable label holders for your standard and heavy duty Husky toolboxes. In my experience, the aluminum extrusion used on the standard vs. heavy duty…
These accessories allow you to expand the functionality of the Husky Build-Out mobile toolbox system by adding custom attachments to the bottom of the toolbox. The cleats and corners securely mount to the underside, enabling you to attach…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Oil drain tube for KTM Husqvarna Gasgas The thread is M12 x 1.5. Compatibility: All KTM from 2009 All Husqvarna from 2014 All GasGas from 2021 Print in TPU or PETG Instructions: Lay the bike on its side with the drain bolt facing up, the…
This is my design of a shooting patch dispenser, BOM: Printed Parts Plastic sheet(optional for windows) 3x M3 Flat Head Screw (25-27mm or ~1 Inch) - For the Single Dispenser Version OR 3x M3 Flat Head Screw (~50mm) - For the Double…
Drawer divider for the Husky shallow drawers
Object description: Grinding fixture for resharpening a Husqvarna Lawnmover Saftey Blade, alternative blades and similar blades for other electric lawnmover types. You can save about 8 Euro = 8 Dollar (at the time of publishing) per…
It is my own desing (no remix). The wheel has been designed to fit an Husquarna Automower 308. Print instructions PETG. The dimensions are set for the cover to hold without glue after treating both parts (wheel + cover) with epoxy (ex:…
A husky design Category: Toy & Game Accessories
Wanted to lay out Gridfinity in the drawers of my Husky table, so I figured I'd post the pre-measured baseplates so you don't have to! I used the Original Gridfinity 5x5 baseplate to start, and adjusted the file along the edges. The…
1:36 scale model of a deinosuchus. The model features detailed scale texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer height or with a resin printer. The files…
PLA. Nozzle/boquilla 0.2mm Layer/capa 0.15mm
Huskylens cover take an M2 screw for the hinge. Or try to use filament instead I added a mockup of the camera as well This design is still in progress.
Husqvarna brand keychain, with a simple and easy design for a quick impression and low material cost.
The Issue I recently purchased a Husky 9-drawer mobile workbench and I loved it immediately except for one thing. The drawers have a soft close mechanism which requires extra opening effort over typical ball bearing drawers. Because of…
When pouring from large bar oil containers, the forward grip of the chainsaw got in the way. This funnel “moves” the hole to the side and out from under that grip.
Filament load/unload issues? MMU2 taking too much space? Not with this Sisyphus Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to almost three revolutions. Use two curved nuts to attach the spool to the…
Holder for the Husky 3/8" ratchet (8.25")
(CZ)Jednoduchý model husitského palcátu Palcát jsem designoval pro kolegu který měl maškarní ples a šel za husitského bojovníka. Díra v modelu je 28,2mm, nicméně se ve sliceru dá zmenšit/zvětšit na základě vaší tyčky. Fotky jsou s…
More Gridfinity bins! This is a 2x6x3 bit with a cut out designed for my Husky digital calipers.
❄ Just in time for the last snowy days of the year… ❄ Meet my cute little Husky 🐶💖 Well… it was supposed to be a Husky 😅 But then I thought… pink is way cuter , right? So here we are (: This fluffy baby has all the winter vibes, big shiny…
I broke/lost the latch to my beloved husky toolbox. I made this as an exercise in fusion so it's not perfect. If you need the other part that connects the latch to the lid, there's a great file by robiscash on thingiverse.…
Massachusetts, USA (MA) Topographic Relief Map with Rivers and Coastal Waters Massachusetts, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
Parasaurolophus dinosaur. Have fun
I bought a set of hex wrenches and needed a way to keep them organized, perfect task for a 3D printer. I printed it with a 0.8mm nozzle, .4mm layer height, one perimeter, 15% infill and no supports. There is a helper brim on the small end…
Love reading but struggle to multitask? Do you find your hands are too small to hold a book with one hand or too large to comfortably use both without looking awkward? This innovative page holder is the perfect solution for you! I…
These 3D-printable accessories enable you to expand the functionality of the Husky Build-Out mobile toolbox system. The cleats and corners attach to the bottom of any flat surface, allowing you to securely lock custom work surfaces onto…
Replacement front wheel assembly for Husqvarna Automower. You will need a set of two 626ZZ bearings (6mm inner diameter, 19mm outer diameter). Axle locker can be replaced by a 6mm star lock washer. If you decide to print the locker, make…
I printed the lever and adjuster in both PLA and PETG using the built in profiles in PrusaSlicer but with 50% infill. Both levers have worked well for test rides. I plan to do some trail riding to see how the lever holds up, but so far…
Refer to original model for printing recommendations, installation procedure, and version selection. I used Avery Mini Business Cards - 1 "x 3" 5329 (https://a.co/d/acuTRJT)
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- The CF Dog – Husky captures the breed’s alert and…
This is a holder for Husqvarna batteries. It allows the batteries to be charged in place. The back is open, so you can mount a spring if you want. The the battery will fly out when you release it. NOTE!! There is a couple of small taps…
this is still a work in progress. but print with abs, ASA or PETG for best results with adaptive layer Hight. The small part is supposed to pressfit on the axel.
Used for later Husqvarna enduro models, replaces the headlight so you don't break it during crash. Two versions, you can print with the Husqvarna Logo as well. (the one on the picture is upside down, printed it wrong). Added another…
Spare maintenance tool to open body on Husqvarna Automover 305. Tho tool has a protruded edge at the back to allow easier removal from its space. When the tool is inserted into its space the distance should be facing downward.
The Convair B-58 Hustler was a supersonic strategic bomber, capable of flying at Mach 2. It was made to fly high and fast to avoid Soviet interceptors. The B-58 was unlike other bombers, that begin it had no bomb bay or weapon pylons.…
It can be stored down or up. Push the head of the ratchet down to angle the handle up for easier grasping.
Compsognathus dinosaur. Have fun
For husky, wolf and dog lovers. An easy print to hang items like keys or leashes. Printing Instructions: Orient with the largest flat side on the bed. More perimeter lines (3+) would be best for the strength of the hooks. You can use…
