Wyniki wyszukiwania: iame

Sortowanie

1678 modeli

P
PrintablesTom

InFiDEL - Inline Filament Diameter Estimator (lowcost)

The InFiDEL is a cheap (< $5) filament diameter sensor that can be calibrated to provide surprisingly precise filament diameter readings in real-time. While firmware support is currently sparse, the idea is to use the sensor to correct…

Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu

Pobrania
2426
Polubienia
676
Ocena
5
P
Printables3DP_Johnny

Simple curtain eyelet, 41mm inner diameter

My kid bedroom curtains had some eylets detached from the fabric, so as a replacement designed this simple model with 41 mm inner diamenter (similar to the original ones). .Printed on a MK3S+; . Filament clear PETG; .0,15 Layer height;

Wydruk około 0,88 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
273
Polubienia
18
Ocena
0
P
Printables3DJG

Adaptable tray for telescope tripod (diameter 1.5 - 1.75 - 2 inch and 40mm)

Adaptable tray for telescope, for 1.75 and 2 inch tripods, with different inclinations and optional holders for tablets. (See also: https://www.printables.com/model/1040019-frame-for-models-of-telescope-trays ) After making several models…

Wydruk około 0,91 €–1,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
214
Polubienia
37
Ocena
5
P
PrintablesElias Ozol

3 part hinge with 3 x 3 mm diameter hole, length: 41 mm, width: 2 x 13 mm

If you are in need of a hinge with holes of a diameter of 3 mm you are in luck! length: 41 mm, width: 2 x 13 mm, 3 holes: 3 mm One end is open which I have melted wider as soon as it is assembled with a soldering iron but you can use an…

Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu

Pobrania
207
Polubienia
19
Ocena
5
P
PrintablesB0L1V3R

A holder for screwdrivers with 9mm and 13mm diameter

The mounts were printed with a layer height of 0.3. in PETG. No supports are required.

Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
186
Polubienia
32
Ocena
0
P
PrintableszdenekGGS

Potentiometer knob with an axis diameter of 4 mm

One and two-color knobs with an inner diameter of 4 mm on the axis of the potentiometer. It is perfectly suited to a music mixer, for example the DELTA AVE type. The original buttons fall out, these are a bit tighter. Tightness can be…

Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu

Pobrania
162
Polubienia
16
Ocena
5
P
Printablesron

Large spool holder (300mm or 350mm diameter - 2.5, 3.5, 5kg). Smooth rolling.

Large spool holder. PTFE contact. No spool swinging. Maximum spool size is 105mm width at the axis. There are two configurations. One is for 300mm max diameter spool, then usual 2.2kg spool fits ( SpoolHolder-rxxx - d300-I3D-1). The other…

Wydruk około 20,58 €–25,15 € nettoWstępna wycena jednego wariantu

Pobrania
130
Polubienia
14
Ocena
5
P
PrintablesElias Ozol

PC fan cover 120 mm, 3 mm diameter holes

This is a fan cover for a 120 mm fan with holes of a diameter on 3 mm

Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
109
Polubienia
9
Ocena
4,5
P
PrintablesStevenTh

Hamster wheel 130mm diameter with spindle without bearings

The hamster wheel for my daughters class pet was squeaky and barely held on. Since it's a very small hamster, I did not find any small enough wheels that could hold onto the cage. Hence I've designed something myself. Wheel specifications…

Wydruk około 0,46 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
102
Polubienia
7
Ocena
5
P
PrintablesSamm_saa

Cylindrical wall air vent [diameter 100]

Grille d'aération de diamètre 100.

Wydruk około 3,97 €–4,85 € nettoWstępna wycena jednego wariantu

Pobrania
88
Polubienia
8
Ocena
5
P
Printableshitjim

Trash bag roll holder / dispenser + storage - up to 120mm diameter

I tried a few trash bag holder / dispenser designs and they were pretty good. Ultimately I made this, combining the features I needed and avoiding the snags. Handle a variety of brands, roll sizes - especially larger ones (we usually use…

Wydruk około 19,82 €–24,22 € nettoWstępna wycena jednego wariantu

Pobrania
68
Polubienia
21
Ocena
5
P
PrintablesManuelM

CR10 Spool Adapter - Inner spool diameter D50 mm (Grilon3)

I made this model from scratch, but this is a remix from another model for an Esun spool adapter, but I do not remember from where I got it. I just added a nut for a sturdy fit. Easy and fast to print with PLA or PETG, 15% infill and 0,2…

Wydruk około 4,03 €–4,92 € nettoWstępna wycena jednego wariantu

Pobrania
62
Polubienia
4
Ocena
5
P

Large Diameter Beam Compass

Two sliders can be attached to any length 5/8" to ¾" thick wood beam to allow drawing or cutting a circle. If you prefer not to use a wood scrap, you can print the beam consisting of multiple beam extensions that press fit together. The…

Wydruk około 3,66 €–4,47 € nettoWstępna wycena jednego wariantu

Pobrania
60
Polubienia
6
Ocena
3
P
Printableswenjuk

Hooks for 2mm diameter wire mesh

Hooks for 2mm diameter wire mesh. The pen has a diameter of 4mm, and the end ball has a diameter of 6mm. No Supports needed. Happy printing.

Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu

Pobrania
58
Polubienia
3
Ocena
0
P
PrintablesOpenscaddad

Star Tree Topper (7" diameter)

The two pieces must be printed twice. The pieces can then be assembled with a rod passing through the middle. The rod can then be lashed to the tree to hold up the topper. I printed this at full scale with natural PLA. The crown shape…

Wydruk około 4,61 €–5,64 € nettoWstępna wycena jednego wariantu

Pobrania
49
Polubienia
12
Ocena
0
P
PrintablesYousef alnasser

Precision Diameter and Angle Gauge

3D design of a ruler for measuring the diameter of a circle and an angle gauge. Ideal for use in engineering and educational projects, this tool allows for precise and easy measurements, making it a great resource for students and…

Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu

Pobrania
41
Polubienia
5
Ocena
5
P
PrintablesMatt

Ball 60 mm Diameter MMU Soluble Supports

60 mm Diameter ball with soluble support interface for the MMU. The filament pictured is color changing PLA and the soluble PVA for the support interface. It is purple when it is cold and pink when it is warm, my daughters love it and it…

Wydruk około 4,65 €–5,69 € nettoWstępna wycena jednego wariantu

Pobrania
37
Polubienia
1
Ocena
0
P
PrintablesMichał

Circle Stencils 22mm & 32mm diameter

Small circle stencils. Designed for tracing 20mm and 30mm pencil borders for painting watercolour miniatures (+2mm to account for 1mm pencil line). Looks really neat printed with Prusament PLA Vanilla White .

Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu

Pobrania
26
Polubienia
3
Ocena
0
P
PrintablesSica

Wire 50 mm diameter roll

A better 3d printed roll for easy use of wires or soldering wire. I received as a gift almost half of kilo of soldering wire in a messy squashed box. I had to untangled it and roll it to something useful so I needed this kind of roll.

Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu

Pobrania
25
Polubienia
0
Ocena
0
P
PrintablesFARI Brussels

Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu

Pobrania
23
Polubienia
1
Ocena
0
P
PrintablesPincoyo

Astronomy : Counterweight Adapter Diameter from 31.75mm to 25 mm (1" 1/4 to 1")

This astronomical adapter allows the use of 1" 1/4 (31.75 mm) internal diameter astronomical mount counterweights on 1" (25.4 mm) diameter rods. The adapter is drilled to allow passage for the counterweight locking screw on the rod. The…

Wydruk około 0,81 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
21
Polubienia
3
Ocena
0
P
Printablesdick

Skadis T-Nut ring with 18mm inner diameter

This is a horizontal ring with an inner diameter of 18mm for mounting on the IKEA Skadis board. The included freecad file should be parametric enough to create any other sizes required. I use it to secure the end of a digital caliper, to…

Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
17
Polubienia
5
Ocena
0
P
Printablessrirachachacha

Wera Gridfinity Screwdriver Rack 1x2 - Larger Diameter 14.55mm

Remix of Wera Gridfinity Screwdriver Rack 1x2 that includes larger holes (14.55mm max diameter) for other screwdriver models (specifically, in my case, a set of Teckman T3 - T5 torx drivers).

Wydruk około 3,29 €–4,02 € nettoWstępna wycena jednego wariantu

Pobrania
11
Polubienia
6
Ocena
0
P
PrintablesDET-Man

KID'nR XL - Keep It Dry ... and Rolling for the Larger Diameter Spools! (Silica Gel Box)

You like 🥰 the KID'nR filament spool silica gel boxes, but your spools don't fit as they have a larger inner core diameter? Here it is the KID'nR XL : All the features as the standard model but now for spools from 56mm - 90mm inner core…

Pobrania
7670
Polubienia
63
Ocena
5
P
PrintablesMartin

Stargate with Iris 80cm in diameter

This is my Stargate intended to be mounted on a wall. The gate is 80cm in diameter and it comes with separable Iris. The inner ring rotates and it has a preparation for eventual lihting. It is a kit and theoretically does not require any…

Pobrania
3760
Polubienia
1613
Ocena
4,91
P
PrintablesAaron Schneider

Outerdiameter_measuring_tool_1

This Tool can be used to measure the outerdiameter of something. You can either print the numbers in the same color as the rest of the model or you can print the numbers in a different color. To find out how to do this, please read the PDF

Pobrania
3624
Polubienia
243
Ocena
4,65
P
PrintablesJoris Calvat

Spiral cable wrap - 2mm to 20mm Inner Diameter

The listed diameter in file names refers to the inner diameter of each piece, allowing precise cable organization. When printing, be sure to add a brim at the base to ensure secure adhesion to the print bed. With the Prusa MK4S, no…

Pobrania
3304
Polubienia
1505
Ocena
4,83
P
PrintablesMediaMan3D

Adapter Rings for 250g Filament Spools for Bambu Lab X1-Carbon AMS (140-154mm diameter)

UPDATE 12-16-2022: Added support for Stronghold and AMOLEN 250g spools. ---- Eryone spools are a different size (150mm diameter), so I modified the original design in a couple of ways. This should work for any filament spool that is…

Pobrania
3275
Polubienia
475
Ocena
4,63
P
PrintablesMaxGyver

Boat Propeller 20cm, 13cm and 10cm diameter, 10mm shaft

Boat Propeller I designed to electrically drive my canoe. It can be driven with a battery drill. Edit: /* To clear things up a bit. 20cm_10mm.3mf is a propeller with 20cm diameter and a hole for a shaft with 10mm diameter. 30° tip angle;…

Pobrania
3137
Polubienia
159
Ocena
4,83
P
PrintablesAMTprojects

Fillet diameter radius gauge | Workshop coaster

What it is A compact gauge to determine inner and outer radii/diameter, ranging from 1 to 20 mm. It also works well as a coaster. What to print There are multiple variants awaiting you: central gauge version 1 measures from 1 to 10 mm in…

Pobrania
2907
Polubienia
1117
Ocena
4,85
P
PrintablesJSchell1309

Muzzle Thread Protector - Threaded 1/2-28 - Various Lengths, Diameters, and Designs

Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…

Pobrania
2158
Polubienia
93
Ocena
5
P
Printablesvictor_frncy

diameter gauge

Find the diameter of parts by successive tests on the gauge as in the image below: The numbers on the gauge are the diameters and range from 2 to 15mm.

Pobrania
1975
Polubienia
138
Ocena
4,17
P
PrintablesJens83

Paint mixer 40mm diameter for small paint cans

This mixer is designed to fit into a cordless drill and can be used to mix paint in smaller paint cans. I tested this extensively and it works great, you can nicely control that not too much air is dragged into the paint and the mixing…

Pobrania
1861
Polubienia
187
Ocena
4,96
P
PrintablesHemRobotics

Hole diameter measuring keychain

A hole diameter measuring tool which you can keep in your pocket. It can be used to check diameter of a hole where other tools might not reach due to tight space. The 14mm variant can measure 14mm, 12mm, …, 4mm diameter. And the 15mm…

Pobrania
1512
Polubienia
267
Ocena
4,93
P
PrintablesAztairya

Cute Siamese Cat Bookmark

Excessively cute siamese cat bookmark. 140x50mm 40x50mm, 3.2mm thick for the kitty 90x25mm, 1mm thick for the bookmark Can be printed without an AMS. Other cats are available in this collection: Cute cat bookmarks Printing instructions:…

Pobrania
1504
Polubienia
449
Ocena
4,71
P
PrintablesNikolica

M2 M2.5 M3 M4 M5 M6 Washers (many diameters)

Help: Every washer is 1mm high , if you want higher washer just scale it in Z direction by this formula to get desired height : height[in mm] = percentage/100 ID - Inner diameter, OD - Outer diameter Expectations: Don't expect a washer…

Pobrania
1409
Polubienia
122
Ocena
5
P
PrintablesUncleFrankSays

UFS-114 2" Wide Tape Dispenser, 3" Inside Diameter

The original design was great https://www.prusaprinters.org/prints/22608 but there is always room for improvement. The original designer, Tetralite, did his own update and made a version 3. https://www.prusaprinters.org/prints/74621 . I…

Pobrania
1296
Polubienia
537
Ocena
4,92
P
Printableskrisvda

Triple & quadruple gravity broom holder + gear for smaller diameter broom sticks

A remix of LoboCNC's Gravity Broom Holder , integrating 3 and 4 holders within a single block. For compact storage of multiple brooms or other tools, requiring fewer screws for mounting on the wall. Adjacent holders have been slightly…

Pobrania
1236
Polubienia
164
Ocena
4,81
P
PrintablesEmkatech (Mike)

Centring Square – Center Finder for Round Diameters

The Centring Square is an essential tool for precision work. It helps you easily find the center of round diameters – perfect for drilling, marking, or alignment tasks. Why choose this tool? ✔ Always useful in the workshop and for 3D…

Pobrania
1235
Polubienia
530
Ocena
5
P
PrintablesAztairya

Cute Siamese Cat Keychain with Blue Eyes

Excessively cute siamese cat keychain. 40x50mm, 3.2mm thick Other cats are available in this collection: Cute Cat Keychains Check out the bookmark versions in this collection: Cute Cat Bookmarks Printing instructions: Start with Beige…

Pobrania
1188
Polubienia
511
Ocena
5
P
PrintablesBaGooN

Silica Gel Container 40mm Diameter

The original size 50mm diameter was too large inside my dry box, while simply resized it to 80% would have made the slit too narrow, so I designed a container optimized for a 40mm diameter. This container is 40 mm in diameter and has a 1…

Pobrania
1135
Polubienia
176
Ocena
4,94
P
Printables3dprintedman

A 100% 3d Printable Table (16" Diameter, 20.5" height, fits MK3 volume)

This is an original design for a full scale side table made entirely from 3d printed parts. It was inspired by the Print-Tables contest, celebrating the launch of Printables.com. Each individual part fits within the build volume of a MK3…

Pobrania
1133
Polubienia
335
Ocena
5
P
PrintablesH3dSprint

Peristaltic pump - nominal diameter Ø8mm - for fluids like cooling water, water, engine oil and other similar

All designed parts of the peristaltic pump are printed out of PETG. For the hose I have choosen silicon to avoid high forces by rotating the impeller. The hexagon shaft where the impeller is put-on have two interfaces, on one side an…

Pobrania
1014
Polubienia
236
Ocena
4
P
PrintablesD-King
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
1012
Polubienia
81
Ocena
5
P
Printablesdodasch

Bike Fork Seal Tool / All Diameter All Brands

Use plenty of solid top/bottom layers when printing. I used 6 solid layers PETG, then 60% full honeycomb infill and had no issues with durability. The models are all tested!

Pobrania
1001
Polubienia
208
Ocena
5
P
Printablesdavidmakes

Fillet diameter radius gauge | 22-40mm edition

Updates 23-03-04 Radius measurement was incorrect due to incorrect application of the ‘decorative’ edge. Resulting in a 0.7mm radius measurement error. This has now been corrected Increased size of text slightly on the joining ledge to…

Pobrania
981
Polubienia
104
Ocena
4,79
P
PrintablesPsi-
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
832
Polubienia
297
Ocena
5
P
Printablesmirabatek

Pill Box (80mm Diameter)

This is travel box for pills with three compartments. It is bigger alternative of my small Pill Box . The diameter is 80mm and total height is 25mm. The cross is printed separately and glued to the lid. Recomended layer height for good…

Pobrania
770
Polubienia
102
Ocena
5
P
Printablesmchangcreative

Espresso portafilter paper filter cutter (multiple diameters)

Update 12/18/23: I have found that using a square of shelf gripper, liner, foam under the cutter prevents the base from rotating. See third photo. Press firmly on the spindle with one hand while rotating the blades with the other. Cut two…

Pobrania
720
Polubienia
118
Ocena
5
P
PrintablesRVfan

QIDI Box adapter for filament rolls with less diameters like SUNLU rolls

This adapter is designed for the QIDI Box, which is a multi material system. Some filament spools—such as SUNLU rolls with a diameter of only ~195 mm—are too small to rest properly on the front and rear rollers. Instead, they sit on the…

Pobrania
719
Polubienia
87
Ocena
5
P
PrintablesLMF5000

Hole Diameter Tester

As you all know, 3D-printed holes usually come out smaller than designed. This Thing consists of 10 holes designed with diameters of exactly 10, 9, 8, 7, 6, 5, 4, 3, 2 and 1mm. Print it out and use calipers to see how much shrinkage your…

Pobrania
715
Polubienia
24
Ocena
5
P
PrintablesBaGooN

Silica Gel Container 40mm Diameter Vase Mode

I previously designed a silica gel container with a diameter of 40mm as it was needed. and this time, I have changed the design to allow for printing the bottle in vase mode. Printing in vase mode results in reduced printing time and…

Pobrania
706
Polubienia
154
Ocena
5
P
PrintablesBuildX

#0092 Paracord / Rope Winder (4mm diameter)

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I tried a few paracord winders to organize my paracord, but none worked as I had…

Pobrania
696
Polubienia
116
Ocena
5
P
PrintablesJim

Ventilation grille garage diameter 100mm / Lüftungsgitter Garage Durchmesser 100mm

Ein Ersatzteil, falls das alte brökelig wird und keine Gitter mehr besitzt. Ich habe meines mit einem schwarzen ABS Filament gedruckt, da es besser für outdoor geeignet ist. Veränderungen dürfen gerne vorgenommen werden.

Pobrania
637
Polubienia
51
Ocena
4,4
P
Printablescaesar_1111

Beer - Soda Can Helmet - insect protection - fits EU 0,5l and 0,33l can (66mm diameter)

I was able to remix of the beer bottle helmet for FDM printing ( https://www.printables.com/model/236264-beer-bottle-helmet-insect-protection-bierflaschenh ) and I love the design, Now I was faced with the ban of glass bottles on my…

Pobrania
596
Polubienia
83
Ocena
5
P
PrintablesSpitzspot

Giant 90mm diameter M&M candy

.20 mm layer height WITH supports Instagram https://www.instagram.com/spitzspot/ Print instructions Category: Food & Drink

Pobrania
558
Polubienia
61
Ocena
5
P
PrintablesStuxned

Festool vacuum hose clip for cable (build 2021 - diameter 39mm)

I have designed this clip for the new 2021 Festool vacuum hose. It is custom-made for the new diameter.

Pobrania
533
Polubienia
87
Ocena
5
P
PrintablesKingCharles

Multiboard Gluestick Holder 25mm Diameter

You need a “Snap” to attach this part to a multiboard wall. Visit https://www.multiboard.io/ for more information.

Pobrania
527
Polubienia
83
Ocena
5
P
PrintablesNico

3-way Pipe Connector 90°, 16mm diameter, 50mm depth

Pipe connector three-way corner piece 90° for pipes with a 16mm diameter. 50mm depth. Can be scaled up if necessary for larger pipes.

Pobrania
511
Polubienia
51
Ocena
5
P
PrintablesAuri3D

Rueda Loca para Canica "15-16 mm Diametro" ( Crazy Wheel for Marble 15-16 mm Diameter )

Esta rueda loca ha sido diseñada para ser compatible con canicas de 15 a 16 mm de diámetro. Es un componente esencial para tus proyectos de robótica y movimiento, permitiéndote crear mecanismos de ruedas locas con facilidad. Detalles del…

Pobrania
505
Polubienia
11
Ocena
0
P
PrintablesJaygrid

Phone Car holder and charger 17mm diameter ball

I have an old holder that have a 17mm diameter ball but do not charge the phone so I made this Print the washer in tpu, I think there are rubber washer in hardware store can fit there if you can print it. I include a CD stand with ball so…

Pobrania
504
Polubienia
72
Ocena
4,67
P
PrintablesMick

Radius diameter finder inside and outside gauge keychain

Bonjour les amis. UPDATE 22 FEV 2023 Seconde version avec les numeros qui ne traverse pas complètement la pièce afin de pouvoir faire un changement de couleur comme dans le…

Pobrania
497
Polubienia
82
Ocena
4,88
P
Printableseponra

Pikachu Planter - 65mm inner diameter

Ive got another request from my gf, that she now wanted another Planter, this time with Pikachu. So i went and took this model, tuned the triangle count down so the model was around ~2mb, uploaded it to tinkercad (im learning Fusion 360…

Pobrania
496
Polubienia
103
Ocena
4,8
P
PrintablesNico

Beyblade X Arena (diameter 40 cm)

Possible to print in 2 colors with MMU to print logo Diameter : 40 cm

Pobrania
490
Polubienia
50
Ocena
0
P
PrintablesRedAura

eSUN Refill Spool (54mm inner diameter)

I increased the inner diameter to 54mm and changed the thread. Thread tolerance = 0.35 mm so calibrate the flow rate beforehand. Material used = ~150 grams Edit: 22.11.2024: Now the whole model can be printed without support. added thread…

Pobrania
487
Polubienia
44
Ocena
5
P
PrintablesBasementLAB

U-Strap Clamp - 2 Holes 50/60/80/100mm diameter

U-Strap Clamp - Tension Tube Clip Conduits Strap Clamps for Pipe Fixing on Various Surfaces For mounting plain or insulated pipes Dimensions available: Ø 50mm Ø 60mm Ø 80mm Ø 100mm Update: 16/05/2025 added Extra Strong Version 14/11/2025…

Pobrania
486
Polubienia
47
Ocena
5
P
PrintablesThePie

4 Inch Diameter PVC End Cap

4 Inch PVC End Cap designed to be a tight fit and 3D printed with TPU filament. End cap is a snug fit on this PVC Y pipe. https://www.amazon.com/gp/product/B07K2YKGWB/

Pobrania
472
Polubienia
13
Ocena
0
P
PrintablesStef Dunlap

Push Pin Fridge Magnet (5mm diameter magnet)

This was made to have a very tight fit with the magnet so that glue wouldn't be required. Depending on your magnet manufacturer, you may need to resize the width and height by a tenth of a millimeter or so. I printed with 0.20mm layer…

Pobrania
455
Polubienia
88
Ocena
5
P
PrintablesLCruz3D

Smaller Toggle Switch Cover - Diameter 6

All credit for this system of cover to toggle switches goes to the original uploader firstgizmo . Big thanks to you, for your model and your share of the step files. I only made changes to accommodate smaller toggle switches like these:…

Pobrania
453
Polubienia
163
Ocena
4,6
P
PrintablesSoupy Prints

Cable/Wire Clamp with Chamfered edges, 10mm Diameter x 5mm screw (Resizable)

This is a simple cable clamp for mounting cables to surfaces. The screw hole has a diameter of 5mm, and the cable hole has a diameter of 10mm. This design is resizable, so only one file has been supplied (Though, I can create more sizes…

Pobrania
451
Polubienia
107
Ocena
5
P
Printablesaniva

Secure-Snap Cardboard Spool Ring for QIDI Box (Jar-Lid Fit, Various Diameters) (stp, step)

Secure-Snap Cardboard Spool Ring for QIDI Box - various diameters 3mf is the QIDI Studio Project for ASA (smooth plate) The Problem If you use cardboard spools in the new QIDI Box, you know the struggle: most adapter rings rely on a…

Pobrania
445
Polubienia
51
Ocena
4
P
PrintablesSurfalex2000

Kitchen Paper Roll Holder 11cm diameter

An adjustable paper roll holder for 11cm diameter size paper rolls. Print instructions Print settings Material: PLA Infill: 15% Supports: No

Pobrania
421
Polubienia
79
Ocena
4,8
P
PrintablesUncleFrankSays

UFS-105 Copper Pipe Diameter Gage, External Measurement

This is my original design. It is similar to a circle template. The circles match the outside diameter of copper pipe made to imperial standard gage. This was a tool of necessity. I needed a quick way to check every section of installed…

Pobrania
398
Polubienia
28
Ocena
0
P
Printablestom TTU

Shower shelf for many rod diameters.

Quick to print, consider its size. I created it to fit to rods for diameters from 16 mm to 26 mm. No supports. No additional hardware or tools are needed. Only printed parts. Nut from back fits to all uploaded sizes. Nut is slim and you…

Pobrania
394
Polubienia
122
Ocena
5
P
Printablestobias Dahl

3D Printable Spray Can Holder for Honeycomb Storage Wall (70 mm Diameter)

Description : This custom-designed spray can holder is specifically crafted for use with honeycomb storage walls. Featuring a snug fit for a 70 mm diameter slot, this holder keeps your spray cans neatly organized and easily accessible.…

Pobrania
383
Polubienia
71
Ocena
4,88
P
PrintablesAlex

Stream Deck mk.1 Holder/Bracket/Mount for 32mm diameter poles

The Parts are split into bodies which allows for easier printing without support. Parts are labeled A,B and C which are meant to be glued together. Be careful to glue them in the correct orientation. There is a Fusion 360 file attached so…

Pobrania
378
Polubienia
79
Ocena
5
P
Printablesaussie-printing

4mm round hole (170mm diameter sieve)

A round sieve with 170mm. diameter and 4mm. holes.

Pobrania
372
Polubienia
20
Ocena
0
P
Printables3DeMode101

Rammstein Beads – 2 versions / 2 diameters

— English Version below — *** Update 01.04.2025: Alle Modelle wurden auch in einer horizontalen Version hochgeladen. Für Schuhbänder zum Beispiel *** *** Update 27.03.2025: Es waren irrtümlicher weise in beiden Ordnern die eckige Version.…

Pobrania
365
Polubienia
240
Ocena
5
P
PrintablesMetikumi

Chair Feet in many Diameters and Angles - Floor Protection - Rev. C

I designed these feet to protect a wooden floor from the metal-pipe legs of a couple of chairs. With the exact angle of the legs, the base of the feet is flat on the floor, reducing the risk of damaging the floor. Update 2025-08-06: This…

Pobrania
364
Polubienia
53
Ocena
5
P
Printablesthall72
Pobrania
360
Polubienia
35
Ocena
5
P
PrintablesChewbugga

Throw Lever (quick zoom change) for Ø42mm ring diameter

Always wanted a throw lever to quickly change the zoom level on my Vortex Crossfire 3-9x40 scope, so I made one. Actually two, one with a straight lever and one with an angled one to interfere less with the bolt handle (see images). My…

Pobrania
358
Polubienia
48
Ocena
5
P
PrintablesPrimermecos

ear plug - flesh tunnel in 20 mm and 10 mm diameter

I remix this thing to create a flesh tunnel and made a hole with a bulge in it. The wall of the 20 mm and the 10 mm tunnel is at least 1mm thick (in the middle a bit more). I have not tried to print the tunnels with a fdm printer yet…

Pobrania
355
Polubienia
23
Ocena
5
P
PrintablesAMTprojects

Fillet diameter radius gauge | Key worm

What it is A gauge to determine inner and outer radii/diameter, ranging from 1 to 15 mm in 1 mm increments. For some reason victornpb's model triggered me to design a gauge that does inner and outer fillets/radii in one piece. I wanted to…

Pobrania
354
Polubienia
84
Ocena
4,6
P
PrintablesBarebaric

Router bit holder for 6mm and 8mm shaft diameter

This model includes the following objects: A bar that holds router bits at an angle and that can be screwed or glued to a base plate. Lengths: 200 mm (7 bits) 250 mm (9 bits) 300 mm (10 bits) 340 mm (12 bits) A 6mm insert An 8mm insert I…

Pobrania
345
Polubienia
95
Ocena
5
P
Printablesazmisov

Support diameter calibration

This file helps you figure out what size supports to use, and quickly check for any problems your supports may have with a specific exposure. Before printing this file, first find your desired exposure using one of the many fast, flat…

Pobrania
343
Polubienia
14
Ocena
5
P
PrintablesWhiteDragonD

Hole Gauge Calibration Diameter block test, with raised numbers

Check out Version 2: https://www.printables.com/model/1481683-hole-gauge-calibration-v2-diameter-block-test-with I kept guessing at hole sizes for support rod inserts into models. This print allows for rod insertion testing to know what…

Pobrania
342
Polubienia
36
Ocena
5
P
PrintablesD-King
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
336
Polubienia
27
Ocena
0
P
PrintablesJarda

Kropítko na zahradní konev průměr 34mm - Sprinkle for garden watering can diameter 34mm

Kropítko na zahradní konev průměr 34mm - Sprinkle for garden watering can diameter 34mm

Pobrania
326
Polubienia
39
Ocena
5
P
PrintablesTomas Horacek

Fully parametric, 6 blades, variable pitch wind turbine (2.7m in diameter) - STEP files included

This 3D printed turbine features : Full variable pitch control Huge size 1200mm blades 2700mm wind turbine Includes 6 blades for improved low wind performance ( RPM monitoring Supports a lot of generators/motor types Has a slip ring to…

Pobrania
326
Polubienia
43
Ocena
0
P
PrintablesNC10

Printable, tool-free 3/8" Nut & bolt & a 1.5" diameter cap for 3/8" hex head metal bolts & nuts.

I needed a “tool free” 3/8" diameter bolt and nut for an outdoor application. The thread pattern on this 1.25" (31mm) long bolt matches conventional 3/8" metal bolts. I also included a separate 1.5" diam cap to fit over the head of 3/8"…

Pobrania
323
Polubienia
24
Ocena
5
P
PrintablesLion

Aesthetic Truss Parallettes / Push Up Bar (40 / 28 mm diameter)

UPDATE February 2026 - It turns out that on hot surfaces the rod loosens because the materials gets too soft and deforms under load. On the other hand, I have one pair that I use only indoor, and it holds up well 1,5 years already.…

Pobrania
321
Polubienia
65
Ocena
5
P
PrintablesHeikit

Customizable Parametric Ring Washer Spacer Ring Tube Seal Generator with variable inner and outer diameter roundings and bulge

I needed a special Ring and couln't find it so I created a ring generator. The model uses OpenSCAD (free and open source software). If you are not used to OpenSCAD see https://openscad.org/ It would be nice if you post your make. Thank you

Pobrania
317
Polubienia
21
Ocena
5
P
PrintablesAuri3D

Rueda Loca para Canica "21-22 mm Diametro" ( Crazy Wheel for Marble 21-22 mm Diameter )

Esta rueda loca ha sido diseñada para ser compatible con canicas de 21 a 22 mm de diámetro. Es un componente esencial para tus proyectos de robótica y movimiento, permitiéndote crear mecanismos de ruedas locas con facilidad. Detalles del…

Pobrania
314
Polubienia
5
Ocena
0
P
PrintablesAaron Schneider

Innerdiameter_measuring_tool_1

This Tool can be used to measure the Innerdiameter of something. You can either print the numbers in the same color as the rest of the model or you can print the numbers in a different color. To find out how to do this, please read the PDF

Pobrania
314
Polubienia
107
Ocena
4,57
P
Printables3dkat

Plant pot with saucer 10, 12 and 15cm diameter

Designed in Fusion 360, simple flower pot with spiral decoration. Drainage hole in the bottom. Fitting saucer. Does not leak from sides. I have designed more sizes - diameters 10, 12 and 15cm. Also available 12cm without hole Print with…

Pobrania
312
Polubienia
35
Ocena
0
P
PrintablesNC10

Trash Bag Holder Dispenser XL Plus for large 6"/150mm diameter trash bag rolls (SamsClub Hefty 33 Gal Rolls)

I wanted a larger version of the well designed, sturdy, simple to print original Trash Bag Holder XL. Large 33 gal trash bags in family size boxes from Sams Club, Costco, BJ's etc will fit in this larger version. I also added mounting…

Pobrania
310
Polubienia
45
Ocena
5
P
PrintablesJarda

Kropítko na zahradní konev průměr 25mm - Sprinkle for garden watering can diameter 25mm

Kropítko na zahradní konev průměr 25mm - Sprinkle for garden watering can diameter 25mm

Pobrania
299
Polubienia
33
Ocena
5
P
PrintablesAhmad

IKEA Yuppienalle Phone Stand (print-in-place) REMIX - Reduced Pin Diameter

Original model pin tolerance was too tight, I reduced the pin's diameter and now works perfectly. I printed it in PLA and only 5% infill and feels light and sufficiently strong. Tougher material and higher infill density would be best,…

Pobrania
294
Polubienia
20
Ocena
4
P
Printablesfoglie0p

Funnel with mini spout 7mm diameter

I needed a funnel to fit in a 7mm OD hole to fill up with sand. Quick model in Fusion 360. Nothing fancy, just a basic funnel to into small holes. Spout is 40mm long. OD is 7mm at the bottom. Top of funnel is 80mm diameter. 100mm height.

Pobrania
292
Polubienia
10
Ocena
5