1876 modeli
I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A filament indicator for Prusament classic spools (non NFC) . Update 2026-01-27: Added v2 with small corrections on weights, added TPU To be placed over the 4 consecutive fully open hexagons (see picture). It snaps in the hexagons around…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
This is ECI mag block for a Ruger 10/22. Keeps the bolt from closing.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It is not really an impact, it's more an indicator. Easy to print and easy to handle. Print it with PETG! Scale calculation: D(wish) /4,5*100% UPDATE: 22.12.23: I made the model a little bit stronger, because it is broken during drilling…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Für den Mk3s gemacht, andere haben evtl einen anderen Führungsstangen-Abstand. Ein einfacher Halter, um eine Messuhr an die X-Achsen Führung zu klipsen. Die Messuhr ist auf gleicher Position wie die Nozzle und kann händisch in x Richtung…
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
Yet another design of extruder indicator for Prusa printers. Pro tip: if the part stops rotating with the extruder glue a small piece of paper on the magnet (e.g. use a paper circle from puncher and a glue stick) to ensure friction…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Heavily inspired by all the different rotation indicators flying around. Very thin and lean version. I primarily did this to have something fitting to the magnets that are flying around in the office and to test the variants feature of my…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bracket to adapt the Sunshine PIP dial indicator to the Ender 3 Neo V2 and alike head style.
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
This is ECI mag block for a Ruger 10/22 or Ruger Precision Rifle. Keeps the bolt from closing.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had a heck of a time trying to find an extruder indicator that will work with my new V3 SE. The few that were out there did not give me what I wanted. So, I took the good work of Toni H and updated it to work with the new extruders that…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Since the CORE One does not have a handle to slide the vent open and closed, I decided to create one. After I created an initial handle, I wanted to see if it was open/closed at a glance. I printed in PETG, though should work fine in any…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a custom-designed self-watering insert for the IKEA SKÅDIS container , turning it into a clean and functional planter with a removable reservoir and water level indicator . Designed for simplicity, ease of use, and better plant…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I added headlights to my Troybilt snowblower and thought lights shining down where I'm walking would be helpful. I created this 90 degree bracket to hold "Ricoy 3/4" Round LED Underbody Rock Front Rear Side Marker Indicators Light…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A small holder for Multifix Aa to holde an Indicator for centering the Workpiece. The indicator has a stem diameter of 8 mm for mounting and a max size of the face of 62 mm. To use it, you need two M3 screws an 3 M3 nuts. The print file…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
I could not find a battery cover, so I created one myself. I don’t want unprotected batteries in my bag! So here it is: the DJI Flip Intelligent Battery cover. Fits nicely into place, locked using the battery-locks. As a bonus you can use…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any Metroid fans around? Here is my take on Samus' emblem that you can use as an extruder indicator. Print in PETG or PLA with 100% infill and glue 2x 8x3mm magnets to the back of the print. For multiple colors use print stops where…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
EN: The funnel (for throat diameters min. 30mm) has a float gauge in the middle, which indicates the fill level while the liquid is being poured. This is useful where it is not easy to see inside, for example when pouring petrol into the…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanted a spare RC Masthead Wind Indicator. 1.5mm SS rod, K&S #5126 3/32" brass tube, lead fishing weight, 3D printed vane, 4mm SS bead w/ 1.5 mm hole, 22 gauge wire insulation, super glue and silver solder.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of @Extrutim's excellent extruder indicator/visualizer that stays centered and uses press-fit magnets.
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Voici des indicateur de taille de buse pour votre imprimante Prusa XL, La nouvelle version se clips sans à avoir a détaché le tube guide fils.
Wydruk około 6,22 €–7,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made an turnigne indicator out of my logo, maybe you like it to :) PLA works great. Two versions availabel: -) for one 5x5x5mm magnet, just glue it in the hole (5,2x5,2mm) -) for one Ø8x3mm magnet, glue it on the back side
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
A simple level indicator for nearly every vessel. You only need a transparent hose with an outer diameter of 10mm, two zip ties and some screws. Happy printing :)
Wydruk około 3,06 €–3,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is based on Matthias Wandel's indicator mount for his table saw fence for micro adjustments to rip sizes. I printed this at 0.2mm layer heights with a “color change” at layer 11/2.2mm to put some magnets in. My magnets are about 11mm…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
The joseph joseph cutting board set does not have an indicator for each cutting board. I then printed this simple indicator to associate each cutting board with a different type of food fruit-meat-vegetable-fish. Support required. Il set…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Default as modeled Glue a magnet to the back after printing.
Wydruk około 0,36 €–0,45 € nettoWstępna wycena jednego wariantu
I wanted to upgrade my quad's headlights and indicators from the originals to these: HIGHSIDER pro Headlight Dual-Stream Next LED https://www.highsider.de/produkt/highsider-dual-stream-next-led-scheinwerfer/ Kellermann Rhombus S Dark LED…
Wydruk około 2,39 €–2,92 € nettoWstępna wycena jednego wariantu
I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…
These Dial Indicator Mounts are specifically designed for the Clockwise Dial Indicator and rebranded variants of it. May work with others untested. Here is Amazon link to purchase Clockwise Dail Indicator Clockwise Dail Indicator with…
A bicycle chain gets longer, when it is worn. This tool helps detecting when is stretched by 0.5% and 1% respectively. Those are two key points to detect when a chain needs changing. 0% is the stretch of a new chain obviously Below 0.5% a…
Hello everyone! Keep your batteries organised in style with this unique mini beer crate battery holder ! Designed as a remix from the original model on Printables, this version comes with practical enhancements like battery indicators…
I still had some black showing on my printer so I made this Extruder Indicator for the Ender 3 V3 SE. I love watching it spin around when printing. https://www.facebook.com/KD9WNR/videos/734574294767306?idorvanity=347538964267031
I noticed there's nothing like this on Printables so I upload my remix of spricvector's design (https://www.thingiverse.com/thing:2213031), which is also a remix of FactoryStandard's original model…
Universal Door Sliding Sign A simple frame with sliding pane to select between two large 5x5cm signs. The signage is just a simple sheet of paper and can be exchanged from above. The template (to be printed and cut-out) is also included…
A poop/purge basket designed for Bambu Lab A1 Mini. It was designed to be light weight and friction mounted to the purge wiper. This Mini version is 40mm tall. This remix changes : Included BambuLab logo added fill-indicator holes
This is my take on a dirty/clean dishwasher indicator. There are some amazing versions of this print out there, but this was how I wanted mine. Print Instructions PETG seems to work well at 0.2mm layer height. Try out some more materials…
An extuder motor indicator made from a 3D Printable Jet Engine's fan by CATIAV5FTW - scaled down to 25%, with a cone or without. Link to this awesome printable jet engine here: Thingiverse There are three versions: With an integrated cone…
Simracing LED Flag Indicator based on an Arduino Nano and an 8x8 WS2812 LED matrix. You can indicate flags, gear, pit limiter, or whatever you like. If you like, you can put the diffusor cover on top. Frotn part with integrated diffusor…
After learning about the rotation indicators for the extruder motor, I loved the idea, but I didn't really like any of the designs I was seeing. I wanted a gear/cog but couldn't find any I liked. So I made my own, I just wanted one but…
Ever forget to close up your gas cylinders and then donate your bottle gas to the atmosphere? This project fits onto a 5-lobe Sherwood cylinder gas valve and provides an instant visual indicator if the valve is opened or closed: The…
A while ago I saw an extruder indicator consisting of a hamsterwheel and a silhouette of an hamster in it ( https://www.thingiverse.com/thing:3139180 ). I re-designed the wheel from scratch, took a pikachu model from Thingiverse (…
This is a parametric planter with a vented, self-watering reservoir and water level indicator. I designed this in Fusion 360 and have included STLs for a 4", cylindrical version with interchangeable smooth, fluted, and knurled variants in…
A very easy-to-build Airspeed Indicator for flight simulation. It comes in two different versions: either articulation by an SG-90 micro servo or with a 28BYJ-48 stepper motor (recommended). UPDATE 2024-12-21: Fusion 360 Source added…
This is a slightly modified version of the original Attitude Indicator by ZockZock . It provides a new designed bezel (as pdf) and a profiled indicator for two color print (white on black). Design and color scheme resembles the original…
A simple extruder indicator. Two rotating arrows as you know them from loading screens. Required magnet: 8x3mm or 6x3mm If you like check out my other designs too!
Compact keychains Only 10-15min printing per keychain! 6mm keyring hole 2mm tall body (i printed it in PLA and is strong enought) 1mm tall text Print Settings: 0.2mm Layer Height Material : PLA or PETG To achieve multicolour prints with a…
Remix of a remix of a remix, I really wanted the replacement to be as similar as possible to the original part, so I added a Beyerdynamic logo and L/R indicators. IMPORTANT: Printed with a 0.25mm nozzle using Prusaslicer 2.5 with Arachne…
This is a simple water level indicator for the hydroponic tower. I adapted a lid for this and fitted it with a hole and a guide for the swim body. The swim body have to be printed with three outer walls and hollow.
===============Update 30Aug=============== a lot of people don't know where to view the bed mesh, you just need to go to your browser. Go to http://192.168.50.229/#/home change the ip to your machine ip, enter the page, then change the…
My Flight Simulation Sixpack Family keeps growing: A fully 3D printed Gyro Compass. Articulation by two standard stepper motors similar to the Altimeter and an encoder for the Heading Bug adjustment. UPDATE 2024-12-21: Fusion 360 source…
This is a little extruder indicator in the shape of a modern wind turbine. I was inspired by the Dutch-style windmill extruder indicators in Prusa's video here: To attach to your motor, you will need either two 8 x 3 mm disk magnets or a…
Umpire's 4-dial and 3-dial Indicators These indicators have the dials in the traditional order of strikes, balls, outs, inning. If you prefer a “count order” you can find them here. There are two options of indicator: a four dial…
Self Watering Plant Pot With Water Indicator The original outer pot is 150 mm in diameter for the inside pot to fit. I use silver silk filament from Ziro bought on Amazon for 259 swedish krona. If you wish other dimension you can message…
I really like to see the automatic Z correction doing it's job during prints. To see the tiny movements of the Z correction (Is it working? Is my bed level?), you can just clip this print to an unused part of the leadscrew. No tools or…
(Copied from the original listing on Maker World) DF54 true zero indicator that uses the original screw. Tight fit so it might work without the screw as well. Do not mind the reflections in the picture. Printed with High Quality BBL A1…
Just another design for an extruder rotation indicator/visualizer. Print, glue a 8x3mm Neodymium magnet to it and snap it onto your extruder motor. I have used CorrugatorSupercilii's OpenSCAD Turbine Propeller Generator to generate the…
This was designed to be used with a cylindrical magnet (8mm diameter by 10mm long) This is a press fit, no glue is required... Print instructions 200 microns works fine !
Edit: I added a mirrored STL for anyone that has the indicator on the right side and not the left as I have. To install this addon just print the original planter glue the floater to the indicator and press this addon behind the indicator…
Keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 34mm x 23mm 6mm Keyring hole
Super simple visualizer that stays out of the way. And it prints in like 5 minutes. Just use a small magnet to mount like all the others.
New Models added, Hexagon, Ring and Rectangular. Need to give credit to ticktock for the original idea. The indicator uses a green 1206 SMD LED and 22k-ohm SMD resistor. Wanted low current draw and low brightness from LED. Obviously the…
A sailing friend of mine needed a vertical 'Little Hawk' style wind indicator that can be mounted at the front of their monohull dinghy i.e. where the painter is tied. I found Kieran's design. But when printed, I found the balance was…
Always been a fan of the radioactivity sign, so now that i finally have my own 3D printer i couldn't resist to make my own extruder indicator! Compliment it with: 40x40 Fan Cover Radioactive/honeycomb…
A poop/purge basket designed for Bambu Lab A1 Mini. It was designed to be light weight and friction mounted to the purge wiper. This Mini version is 40mm tall. This remix changes : Included BambuLab logo added fill-indicator holes…
Ender 3 Sprite Extruder Rotation Indicators Sprocket and Hexagon
This new hex key holder design has numeric indicators on the front to show the size of the hex keys. I've uploaded two versions of this new design: One with only the numeric hex key sizes (hex_key_holder_without_indicators) One with a…
An indicator to the timemore sculptor 078(s), to help with setting the grind size.
I loved the look of Ardjan's non-flat hamster extruder indicator, but when I read they downgraded a Pikachu model to create the hamster I felt that an incredible opportunity was missed. Thus, I went back to the original Pikachu…
Build Video Here Config Video Here 🛒Buy it as a Kit or Assembled: https://captainbobsim.com/product/heading-indicator-kit-or-assembled/ Bill 'o Materials: x2 BYJ48 Stepper Motors (and Drivers) http://ebay.us/aS1yyZ or…
Wind indicator, without additional bearings. Printed from PLA. After printing the bearings gently hold and move them, then add some oil. The blades for the windmill should be printed with supports. Bearings should be printed at a height…
Today we'll be building an Airspeed indicator for the Cessna 172! This Thingiverse will soon become outdated. For the most up to date models, check out the GitHub: https://github.com/CaptainBobSim/The-Cessna-172-Project-V3 (check section…
My CR-touch may be working, but for whatever reason, my prints are not using the stored bed mesh. (Yes I added M420 S1 blah blah blah) Creality support is dismal and I needed to get back to printing! I designed this indicator mount to be…
Never forget to put the right bin out again! This wheelie bin model is part of a project which tells you which coloured recycle bin is due to be collected. The code checks your local council for up to date information and this device…
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 30mm x 27mm 6mm Keyring hole
The Printables version will not be updated. The best place to get it is here ! Find the MobiFlight code under Section 2/Instrument Bill 'o Materials: 3D Printed Parts Arduino Mega 2560 (can be shared with other components) x2 BYJ48…
This will give an indication of whether the tension on both belts are equal
This adapter allows to attach a indicator dial to the print head of Bambu Lab Printers (P1P, P1S, X1, X1C) to measure bed flatness. I am using a STEINLE 3105 (EAN 4251285620469) to do the actual measurements. If the adapter does not fit…
The Printables version will not be updated. The best place to get it is GitHub ! Find the code under Section 2/Instruments/VSI To navigate all of the files on your journey towards homecockpitness, * Source Files is where you'll find all…
Overview A nozzle indicator for your 3d printers. I have forgotten too many times to not have one of these and it gets more difficult the more printers you have. Double sided tape is required to affix the indicator where wanted. Printing…
Inspired by the Nextruder gearbox, I created this visualizer. The extruder indicator looks very similar to a cycloid gearbox, although it is actually only a half one. Google it, it's an interesting concept! The middle part rotates…
Jet engine has spiry top but I like more spherical one ;) Print instructions I suggest print with 1mm brim and leave it there at 0.15mm layer
I really wanted a trap I could tell was occupied at a glance as I would have it set in the my porch most of the year round so I added a flag which pops up as soon as the inner door of the trap is lifted. This doesn't otherwise affect how…
This is my Print in place - Compliant mechanism using Dial indicator! No supports, no assembly, just print and use! See how it works, and how it was designed!: https://youtu.be/RFkn6gMkz78 All clearances are 0.3mm/ 0.4mm/ 0.5mm, so most…
This filament spool gauge/indicator gives you a rough idea of how much filament you have left to work with. The hanging loop is a 50mm diameter whole which is fairly typical of most spools. You can hang this on the spindle with your…
The “universal” mount will work with most dial indicators and fit's into most tool holders. The all-in-one model fits an AXA quick change tool post and replaces the back of your dial indicator. That way you're not tying up an expensive…
I wanted to do something to increase a safety on roads... So I upgraded and remodeled a Loose Wheel Nut Indicator to everyone, who have a truck, delivery truck, trailer or big pickup. I remodeled a great model by FullSendFab from…
This has direction indicators for if the direction changes so you don't forget. The small arrow goes on the side with the lip. Make sure the arrows are facing opposite directions. The reason for the larger arrow is so that gravity keeps…
I made this dial indicator bracket that utilizes the LIDAR bracket for mounting to the print head. It uses (1) M4x15 socket cap screw w/ nut, & (2) 3mm heat-set inserts and the factory screws that hold the LIDAR on. Note that the LIDAR…
Extrusion indicator in the shape of the Open Hardware symbol. Requires two 8x3mm magnets and some superglue. Print instructions No supports. One color change. After it's printed, please scrape the recess so that the magnets will sit flat.…
There are a lot of dial indicator mounts out there, but I wanted to make one that would be able to be mounted to a 2020 extrusion, as opposed to your hot end, as there are so many different types out there. I am no longer using the stock…
This is a remix of the original Extruder Indicator with a longer connector to prevent it from falling off.
I designet a simple strike indicator for fly fishing
A remix of the original from @Mikolas Zuza Because I have the awesome extruder motor cooler from @wda https://www.thingiverse.com/thing:4280200 and the brilliant RHD CS Nozzle for the MK2.5/3S from @RH_Dreambox…
It's a Bat Extruder Rotation Indicator for Ender 3 S1 pro print it slow at first because there are many small parts
DJI Mini 3 / Mini 3 Pro / Mini 4 Pro Battery Case for Intelligent Flight Battery with snap on. After a flight I often forgot witch battery in my bag is recharged. You can switch the mechanical indicator on the bottom from Full to Empty.…
A simple bracket to be able to easily read height to bed from a Sprite Extruder on an Ender 3 S1 Pro or Plus. Stop using the "paper trick!" With an Allen wrench, this allows simple removal, installation, and some height adjustment for the…
There are many extruder movement indicators, and I was looking for something simple, so here is my own take. This is a collection of a number of indicators, printed in two colors (black and orange Prusament PETG in my case, to complement…
Jan24. Minor updates to some angles and tolerances following Xmas 23 present builds. Modified indicator which now holds a more central position when in the extreme ‘up’ (out of water) position. Code for Mk4 added alongside updated Mk3…
This a flex filament connector for SPC serial ports commonly found on digital calipers and indicators, for those wanting to build a DIY DRO or simply read the data off the calipers over serial. Update : check out #EspDRO which uses an…
Video about holder Designed to fit Gridfinity baseplates designed by ZackFreedman Holds Mitutoyo 513-473-10 test indicator or any other similarly sized indicators.
