Wyniki wyszukiwania: iner

Sortowanie

12 331 modeli

P
PrintablesSytan

Mini Hanging Storage Container

This was an unintentional remix. I actually started a design for a pill container on my own, and then found this one, which was very similar! I reverse engineered their lid design, as my first one was trash, and then I improved upon it as…

Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu

Pobrania
22 676
Polubienia
5055
Ocena
4,92
P
PrintablesLolcio

Soap dish, Sponge dryer with drainer. INDX gcode included

The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…

Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu

Pobrania
8928
Polubienia
1476
Ocena
4,94
P
PrintablesPsychProd

FAST Print In-Spool Desiccant (Silica Gel) Container with Hygrometer

FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…

Wydruk około 4,26 €–5,21 € nettoWstępna wycena jednego wariantu

Pobrania
7422
Polubienia
1358
Ocena
4,83
P
Printablesvandragon_de

COS - the Container Ship

A container or cargo ship belongs to every bath tub fleet. I once drew a small and a particularly large version. The swimming characteristics are still very good even when fully loaded. Have fun printing :) Video: Print instructions Video…

Wydruk około 3,65 €–4,46 € nettoWstępna wycena jednego wariantu

Pobrania
6057
Polubienia
888
Ocena
4,94
P
PrintablesExlipsis

Flippy Friendly Butterfly Knife Balisong Trainer {NO SCREWS NEEDED!}

BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…

Wydruk około 3,59 €–4,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
5344
Polubienia
250
Ocena
4,56
P
PrintablesTomek

Super fast silica gel desiccant spool container - vase mode

About I really love original Silica gel spool container by @gdrag. However I wanted to achieve Three additional goals: Make a spiral (vase) print to reduce filament and time, Add some distance between side holes and internal wall of the…

Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
4611
Polubienia
812
Ocena
4,88
P
Printables3DLabPrint

Qtrainer – simple trainer plane

Although not as fancy as other planes, this QB based trainer is going to be a workhorse of your daily flying. Transferring from foamies get used to a different behavior of scale weighted and rigid planes with this durable, easily…

Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu

Pobrania
3592
Polubienia
513
Ocena
3
P
Printableslaurens

cigarette container with lighter

there is a better model!!! V4 link I designed this container for the holidays near the pool to keep my cigarettes dry. Print this without support and with a layer height of 0.2 to keep the threads nice. Update 15-aug-22: For easy printing…

Wydruk około 4,19 €–5,12 € nettoWstępna wycena jednego wariantu

Pobrania
3372
Polubienia
709
Ocena
4,79
P

Egg Maze Container cactus pattern

Egg-shaped puzzle container with “cactus like” ribbed pattern on the outside. This maze is not complex, without too many long dead-ends; but there are no external indicators of where the “pointers” in the maze are located. Designed to…

Wydruk około 3,79 €–4,63 € nettoWstępna wycena jednego wariantu

Pobrania
2586
Polubienia
279
Ocena
5
P
PrintablesMrViddy

Chopstick Cheaters Helpers Trainers

Inspired by the design from FUN CHOP chopstick helpers. Great for rounded chop sticks as well. Recommend Print in PETG for flex and strength. Recommend 100% Infill FunChop chopstick Helpers (Amazon Link⬇) https://a.co/d/1i6oWUr

Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2460
Polubienia
460
Ocena
4,95
P
Printables3d modely

cat for beginers gcode

Jednoduchá kočka pro začínající tiskaře v souborech pro stažení najdete i gcode který si můžete stáhnout pokud jste začátečníci a nemáte zkušenosti se slicerem. Nezapomeňte se kouknout na můj profil kde najdete další moje modely. A simple…

Wydruk około 1,52 €–1,85 € nettoWstępna wycena jednego wariantu

Pobrania
2250
Polubienia
10
Ocena
0
P
Printablesvandragon_de

Trucks for my Container Ships

So that the fun of the game continues even outside the bathtub, I provide two trucks to transport the containers. So let's get to the fun of the game.

Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu

Pobrania
2101
Polubienia
352
Ocena
4,86
P
Printablesbuchnema

Ultra-slim Pocket Pill Case – Thin Compact Medicine Container for Travel or Everyday Carry

This compact pill case is designed for situations where a full-size pill organizer would be unnecessary or impractical. Its ultra-slim form factor makes it ideal not only for travel, but also for everyday situations such as g oing out for…

Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu

Pobrania
1771
Polubienia
373
Ocena
4,76
P
PrintablesSzeez

THE balisong trainer

It got 2 types of blades and 3 types of handles 1 blade of choice blade fillers optional if using the blade with triangles needed if using the blade with lines 2 handles of choice optional infill for the triangle ones 2 pivots optional 4…

Wydruk około 4,38 €–5,35 € nettoWstępna wycena jednego wariantu

Pobrania
1700
Polubienia
191
Ocena
4,86
P
PrintablesUko

Prusament Screw-Top Container v2

These are parts that you can use to convert a Prusament spool cardboard core into a container. Insert the top and bottom parts from both sides into a spool core. The "teeth" on the parts align with the teeth on the original spool sides.…

Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu

Pobrania
1675
Polubienia
529
Ocena
4,89
P
PrintablesSouzoumaker

Sprout Growing Mason Jar Strainer

Earlier this year I got into growing sprouts. While living in my dorm room at college, I wanted a more convenient way to strain the water from the mason jar and came up with this print. It's a meshed strainer lid for wide mouth or regular…

Wydruk około 1,00 €–1,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1605
Polubienia
226
Ocena
4,89
P
PrintablesDesmodromic

Silica Gel Dessicant Container Funnel

This is a remix of gdrag's excellent Silica gel spool container cap / lid, modified with a large funnel to make filling easier. The funnel is twice the diameter of the container opening so it really helps to keep from spilling those…

Wydruk około 2,41 €–2,95 € nettoWstępna wycena jednego wariantu

Pobrania
1601
Polubienia
261
Ocena
4,97
P
Printablesmichelegz

Silica gel container - Fast Print - Wavy surface

I really liked the original model by @gdrag and the idea of @Lorro to use a wavy mesh. So I combined the two to get a smooth external surface with the wavy mesh. It prints faster avoiding retractions and with less vibrations. The bottom…

Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu

Pobrania
1598
Polubienia
205
Ocena
4,97
P
PrintablesDaniel Frank

12 Gauge Shotgun Shell Container

Container for small stuff (BB balls, toothpicks, etc.) in style of 12 gauge shotgun shell inspired with look of original Doom game. Preferably print the top part in red and bottom in gold (brass). Thread might go little tough at first but…

Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu

Pobrania
1285
Polubienia
142
Ocena
5
P
PrintablesTerence

MMU2S Idler Tension Screw Retainer & Thumbscrew

A solution to eliminate the hide and seek game every time the MMU2S door is flipped. No disassembly or extra components required, reuse existing tension screws and springs, I printed the bases separately in a darker colour and I can…

Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu

Pobrania
1219
Polubienia
228
Ocena
4,74
P
Printablescalipsoii

Tiny keychain pill container

Update 2026-01-01: I'm adding a revised version of this (v13) with updated thread tolerances to print on a wider variety of printers. You still need to use a 0.25mm nozzle and I recommend PETG as it oozes better than PLA and generally…

Wydruk około 0,60 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1159
Polubienia
185
Ocena
4,29
P
PrintablesTmpx64

Universal sink strainer

Mine was missing when I moved in. I had a scare once with an earing falling in the sink and decided to act. Printer to the rescue. Here's a link to another improved version that doesn't require any supports: If you’d like to support my…

Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu

Pobrania
930
Polubienia
254
Ocena
4,92
P
PrintablesDao

Card container for Nintendo Switch games

Containers to store cards for Nintendo Switch games. Containers with lids for 3, 5, 10, 15, 20 cards. Snap feature keeps the lid secured to the container. Customise the lid with a negative volume, new feature available in Prusaslicer. No…

Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
918
Polubienia
142
Ocena
5
P
PrintablesEricFrenk

Can Strainer | Kitchen Gadget

The 0.5" model is good for just straining the liquid. The 1" model is better for things like tuna cans where you want to remove a majority of the liquid.

Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
910
Polubienia
146
Ocena
5
P
Printablesargoroots

Gridfinity base for Systainer 3

Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.

Wydruk około 3,39 €–4,14 € nettoWstępna wycena jednego wariantu

Pobrania
901
Polubienia
145
Ocena
5
P
Printablesmuddymaker

Star Trek Container

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE December 19th 2023-Increased the thread tolerance.…

Wydruk około 3,79 €–4,63 € nettoWstępna wycena jednego wariantu

Pobrania
866
Polubienia
211
Ocena
4,7

Carabiner Size S

Hey there :) This Carabiner is locked through tention and thus distributes the force through both arms. Its interlocking parts are designed to resist shear forces without requiring supports when printed. It is perfect for keychanes or to…

Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
803
Polubienia
119
Ocena
4,5
P
Printablestgirao

7 Cigarette container with slide cap (V2)

This is a 7 Cigarette container with a slide cap. The box should be printed in PLA and the cap in ABS for smooth slide! Note that if both are PLA the cap slide does not work properly (too stiff). The assembly of the cap is made by forcing…

Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu

Pobrania
803
Polubienia
175
Ocena
4,75
P
Printables3d modely

dog for beginers gcode

Jednoduchý pes pro začínající tiskaře v souborech pro stažení najdete i gcode který si můžete stáhnout pokud jste začátečníci a nemáte zkušenosti se slicerem. A simple dog for beginning printers in the download files you will also find…

Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu

Pobrania
750
Polubienia
7
Ocena
0
P
PrintablesKCxStrange

Shoe Tie Trainer

I designed this for my wife's class she teaches to help the kids learn to tie their shoes. I printed it at 70% Scale. I designed it so you can set a color change for the top half of the shoe to make it look similar to "Converse" shoes.

Wydruk około 1,99 €–2,43 € nettoWstępna wycena jednego wariantu

Pobrania
673
Polubienia
131
Ocena
5
P
Printablessh

V2 Partitioned Carabiner + lock hook (more stiff)

use ❗PETG❗ or some flexible material (do not use PLA) Info: carabiner modification of my previous model this variation is more stiff (harder to open, harder to insert key ring through the gap) Dimensions: its height is 7,5 cm (bigger by…

Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
647
Polubienia
116
Ocena
5
P
PrintablesdarthGinger

Stackable Lego Storage Containers

Stackable Lego storage boxes in 3 sizes. Two variations of each size exist, one with a space to insert magnets and one without. The magnets are small, inexpensive, and help keep the lid more secure but will work just fine without them.…

Wydruk około 7,40 €–9,05 € nettoWstępna wycena jednego wariantu

Pobrania
637
Polubienia
115
Ocena
4,5

Carabiner Size L

Hey there :) This Carabiner is the large version , there is a small and medium as well. It is locked through tention and thus distributes the force through both arms. Its interlocking parts are designed to resist shear forces without…

Wydruk około 1,24 €–1,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
614
Polubienia
102
Ocena
4,86
P
PrintablesStefan R

Tütenhalter / Container for Soups

Mein Ziele bei diesem Modell waren: Ordnung im Küchenschrank Stabil Sparsam im Filamentverbrauch Schneller Druck Da nur Tüten in diese Box kommen, braucht der Boden nicht durchgängig zu sein, das spart Filament und beschleunigt den Druck.…

Wydruk około 4,72 €–5,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
546
Polubienia
68
Ocena
5
P
PrintablesaRGiRob

mini containers pet bottle caps upcycle

In these mini containers you can put, for example, nozzles, washers, small screws, nuts etc. Three dimensions from 10,15 2 20mm high, both open and closed (the open ones for example I use them to contain the silica gel). The caps are…

Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu

Pobrania
539
Polubienia
96
Ocena
5
P
PrintablesSteveS42

Laundry Detergent Cup Drainer

Update Use this remix for the larger 237 fl. oz. jugs. _______________________________________________________ I found this design about 3 years ago on Thingiverse by davwilso. https://www.thingiverse.com/thing:2748680 I liked the idea…

Wydruk około 4,44 €–5,43 € nettoWstępna wycena jednego wariantu

Pobrania
506
Polubienia
78
Ocena
5
P
Printableshmatostech

Sink drain strainer

This drain strainer is a perfect fit for Fiat Ducato Burstner Ixeo Plus 724 campervan sink.

Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
499
Polubienia
49
Ocena
5
P
Printablesjcjames_13009

Mirka DEROS Orbital Sander Handler for Systainer

Design Starting from the two following models: https://www.printables.com/model/122734-systainer-150mm-sander-holder https://www.printables.com/model/135647-mirka-deros-wallmount-double I designed in Fusion 360 a new handler compatible…

Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu

Pobrania
479
Polubienia
77
Ocena
4,5
P
PrintablesSirPrintsALot

Festool Sys3 Organizer 2x4x0.5 stackable container with 8 compartments

Just wanted a version that had 8 equal compartments instead of 6 like the original model.

Wydruk około 4,30 €–5,26 € nettoWstępna wycena jednego wariantu

Pobrania
479
Polubienia
117
Ocena
5
P
PrintablesEpicMount

Trainer Front Wheel Stand for Mountain Bike

This front wheel stand 2.4" 27.5 and 2.5" 29" mountain bike wheels I trimmed a few mm off the bottom and printed that in TPU to add padding as well as adding a layer of felt on the bottom to prevent scratching my wood floor. Fits a MK3…

Wydruk około 9,90 €–12,09 € nettoWstępna wycena jednego wariantu

Pobrania
472
Polubienia
85
Ocena
5
P
PrintablesMigueppc

Japanese Joinery - Kanawa Tsugi

This 3D printable piece features identical geometry on both sides and is designed to be printed twice using model 'A.' Whether used as a standalone piece or incorporated into your projects, it delivers exceptionally satisfying and…

Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu

Pobrania
450
Polubienia
70
Ocena
5
P
PrintablesSteveS42

Laundry Detergent Cup Drainer Larger Tray and Screw-on

After reviewing a few comments, it became clear to me that the new jugs not only had a larger diameter screw-on, but the cup was larger too. My wife likes to use the original small cup and I am guilty of not thoroughly investigating the…

Wydruk około 5,66 €–6,92 € nettoWstępna wycena jednego wariantu

Pobrania
449
Polubienia
63
Ocena
4,83
P
PrintablesMatthias

Silika-Dose Silica-Tin Silica-Container

Anwendung: Drehknopf lockern, Deckelverschluss drehen und Silika-Gel einfüllen. Der Deckelverschluss dient als Einfüllhilfe. Deckelverschluss wieder verschließen und Drehknopf fest ziehen. Die passende kleine Schaufel findest du hier:…

Wydruk około 1,34 €–1,63 € nettoWstępna wycena jednego wariantu

Pobrania
434
Polubienia
55
Ocena
5
P
PrintablesGuyzerr

Seive / Strainer

I needed a simple strainer for a specific application so I created this. For my needs it works real well. Made with generic PLA at 20% infill

Wydruk około 12,74 €–15,58 € nettoWstępna wycena jednego wariantu

Pobrania
430
Polubienia
28
Ocena
5
P
Printablesticat

ESP32 NerdMiner housing with stand

Another housing for the ESP32 development board with a 240*320 pixel display. Suitable for these two boards: ESP32-2432S028R https://de.aliexpress.com/item/1005007774435209.html ESP32-2432S028 2xUSB…

Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu

Pobrania
414
Polubienia
25
Ocena
0
P
PrintablesLele88

Carabiner Ring Small - Piccolo Moschettone ad Anello

A small carabiner to avoid losing small items. Printing time 4 minutes, filament used 0.18 meters Un piccolo moschettone per non perdere oggetti di piccole dimensioni. Tempo di stampa 4 minuti, filamento usato 0.18 metri

Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu

Pobrania
413
Polubienia
41
Ocena
4,67
P
PrintablesGarage Maker

Silicagel container for Fixdry Dehydrator

silicagel remain dry when the dehydrator is on and keep dry the filament spool when the timer is off. I never reminder wich temparature and time used for different filament for this reason I include the requirement fromt the manufacturer…

Wydruk około 4,22 €–5,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
402
Polubienia
23
Ocena
0

sink strainer

PLA 200/60 Fan 100% No raft

Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu

Pobrania
401
Polubienia
25
Ocena
5
P
Printables75echo

Roadworks Container- scale models for diorama 1/14, 1/16 ,1/12,1/10

Printed at 100% fits 1/16 scale or resize in your slicer to fit desired scale.

Wydruk około 14,97 €–18,30 € nettoWstępna wycena jednego wariantu

Pobrania
394
Polubienia
65
Ocena
0
P
PrintablesJon003

Drawer Organizers for Festool SORTAINER SYS 4 TL-SORT/3, with no slip indentations!

I wanted to make some drawer organizers for the Festool Sortainer that grabbed the indentations in the bottom of the Sortainer drawers, so that when you hadn't filled the drawer, the boxes would not slide around. This also keeps them…

Wydruk około 29,06 €–35,51 € nettoWstępna wycena jednego wariantu

Pobrania
381
Polubienia
60
Ocena
5
P
Printablesvictoriadouglas

The Flatliner - Cartoonist's Nib Holder

The Flatliner is an update to the classic nib holder design, with features and specialization for modern cartooning and calligraphy. Designed and refined by working professionals, the Flatliner includes: Snap-fitted cap hexagonal…

Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu

Pobrania
378
Polubienia
46
Ocena
4,83

Carabiner Size M

Hey there :) This Carabiner is the medium version , there is a small and large as well. It is locked through tention and thus distributes the force through both arms. Its interlocking parts are designed to resist shear forces without…

Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
376
Polubienia
55
Ocena
5
P
Printablessh

🍴 Cutlery drainer/dryer/box - hanging possibility

Intro: i got inspiration at print from Maciey, but i needed different properties. so i have created my own model (Blender file attached) Characteristics: inner area: all edges rounded, including inner bottom corners ! → ✅ easy cleaning…

Wydruk około 7,91 €–9,67 € nettoWstępna wycena jednego wariantu

Pobrania
367
Polubienia
24
Ocena
5
P
PrintablesSteveS42

Sink Strainer for Garbage Disposal

I like this design. I wanted one for my garbage disposal side, but the dimensions were not right. I didn't want to scale it, so I created a Fusion 360 design using the eyeball method. The design (included) is set for 85mm diameter and…

Wydruk około 2,05 €–2,50 € nettoWstępna wycena jednego wariantu

Pobrania
365
Polubienia
38
Ocena
4,8
P
PrintablesBasementLAB

Remover Tool for Snap Rivet - Fastener - Retainer Clip

Remover Tool for Snap Rivet - Fastener - Retainer Clip Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Hand Tools

Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu

Pobrania
348
Polubienia
46
Ocena
4,67
P
PrintablesJakub Kříž

Awesome BrainZap! PillBox / Pill Container / Pill Box / Capsule

The pillbox that's fun to open, even if you don't want to take your pills. It's amazing for daily usage because it is fun to use it. It is not just another PillBox, this is Awesome BrainZap! PillBox . PillBox is designed to store your…

Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu

Pobrania
346
Polubienia
26
Ocena
0
P
Printablesargoroots

Flat base for Systainer 3

Flat base for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.

Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu

Pobrania
327
Polubienia
44
Ocena
0
P
PrintablesHellBz3D

Beer Crate - Kleiner-Klopfer

Here is a little remix, because a friend asked me, to make a birthday present for her. Here you can place 6 small knocker bottles . These boxes are also stackable, but not compatible with the other original boxes

Wydruk około 5,69 €–6,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
318
Polubienia
29
Ocena
0
P
PrintablesAtaris

Bottle drainer

2pieces just assemble togeher. No gluing. Material: PETG. Layer height: 0.25mm infill: 25%

Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu

Pobrania
316
Polubienia
43
Ocena
4,83
P
PrintablesMadeinSwabia

Sink Strainer / Gully Cover - Sieb für den Waschbecken-Abfluss

Hello friends from all over the world :) This is my sink strainer / gully cover in the bathroom. The diameter of my sink is 40mm. If someone likes this Design, it would be great if you also give it a like and post a make ;) - - - - - - -…

Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu

Pobrania
303
Polubienia
27
Ocena
4,8
P
PrintablesFlorianMayerle

Robust tablet holder (I-Pad) for home bike or trainer (landscape or portrait)» #NoSupportNeeded

Universal tablet mount for home trainer bikes or similar. There are two versions available to download, one for landscape and one for portrait. Only two parts differ for the two versions. In “Other Files” you will find the Assembly…

Wydruk około 9,90 €–12,10 € nettoWstępna wycena jednego wariantu

Pobrania
301
Polubienia
42
Ocena
5
P
Printables75echo

Container roadworks(Compact) scale models for diorama 1/14, 1/16 ,1/12,1/10

printed at 100% fits 1/16 scale or resize in your slicer to fit desired scale.

Wydruk około 8,55 €–10,45 € nettoWstępna wycena jednego wariantu

Pobrania
300
Polubienia
69
Ocena
0
P
PrintablesJakub Kočí

Hazardous materials container

This is my design of a stalker-like artifact container. It is a simple box with sci-fi design. It has few openings for upgrading with electronics, for example small display with buttons that can be connected to arduino and serve as a…

Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu

Pobrania
299
Polubienia
93
Ocena
0
P
PrintablesSteveS42

Laundry Detergent Cup Drainer Larger

The most recently purchased jugs of all® detergent have a larger diameter screw-on cap. My guess is they are standardizing with the rest of the industry as the new cap is the same size as OxiClean™ and several other bottles of various…

Wydruk około 4,52 €–5,52 € nettoWstępna wycena jednego wariantu

Pobrania
278
Polubienia
24
Ocena
5
P
PrintablesSteveS42

Tuna Can Drainer (Style B)

My wife has 2 styles of commercial tuna can drainers. But when the can company went to pull tab lids, the commercial models quit working as the diameter of the new lid was slightly smaller. I took some measurements and studied the…

Wydruk około 3,66 €–4,47 € nettoWstępna wycena jednego wariantu

Pobrania
272
Polubienia
35
Ocena
5
P
Printablesserbji

Mini container - pills

Malá krabička na suplementy, vitamíny, šroubky. Šroubovatelná a tisknutelná bez podpor.

Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu

Pobrania
269
Polubienia
43
Ocena
5
P
PrintablesCoMet

Silica Screw Container

Model uses layer specific setting of prusa slicer, prints sequential. Thanks to animatorgeek for his fine model.

Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu

Pobrania
261
Polubienia
32
Ocena
5
P
PrintablesGreatOldOne

GT2 Timing Belt Joiner

A simple joiner that allows you to connect two ends of a length of 6mm wide GT2 timing belt. The joiner is shaped so it does not interfere with the teeth of the belt. Print with largest surface down. Slip the ends of the timing belt into…

Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
258
Polubienia
19
Ocena
3
P
PrintablesTom

Sortiment for Qbrick Systainer One 2.0 - Drawer 3.0 Ultra HD

Sortiment for QBrick ONE 2.0 DRAWER 3 TOOLBOX EXPERT RED Ultra HD Box Size : S , M , L , .…

Wydruk około 19,01 €–23,24 € nettoWstępna wycena jednego wariantu

Pobrania
257
Polubienia
83
Ocena
0
P
PrintablesMateo Van Damme

Silica Gel container for drybox

To keep my filament dry I use a set of dryboxes. Each box has this container in it. I wanted a way to keep the silica gel beads from jumping around and sticking to the spools but still be able to contact the air as much as possible.…

Wydruk około 0,86 €–1,06 € nettoWstępna wycena jednego wariantu

Pobrania
256
Polubienia
34
Ocena
5
P
PrintablesEFY

Best Sink Filter Strainer 38mm - 45mm Compatible

Design Description: Sink Drain Filter This design is a specially crafted sink drain filter aimed at enhancing the cleanliness and functionality of sink drains. Compared to traditional sink drains, it is more efficient and user-friendly.…

Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu

Pobrania
249
Polubienia
30
Ocena
5
P
Printablesnmckayjr

Handy Dandy Soap Container

Living in a college dorm, I found myself unable to cary a bar of soap back and forth to the bathroom without making a huge mess. And yes, I know I could buy a soap container for relatively cheap, but I'm an engineering major with a 3D…

Wydruk około 3,88 €–4,74 € nettoWstępna wycena jednego wariantu

Pobrania
246
Polubienia
20
Ocena
5
P
PrintablesTrachtorBeam

Universal Spool Roller | 1 KG Filament Spool | Plastic House 3.7L Container

Print in PETG using standard PETG printing parameters or some other tough plastic like ASA. I used Inland PETG and printed with Prusa's generic PETG parameters. Part is thin, so infill 15% will be fine. PLA will work fine too, but…

Wydruk około 5,04 €–6,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
245
Polubienia
44
Ocena
0
P
PrintablesArjan Knulst

Respiratory Muscle Trainer (RMT)

Respiratory Muscle Trainers (RMTs) are proven to be useful in improving the condition of patients after breathing-related conditions like COVID-19 or COPD. These RMT devices are neither well-available nor affordable in most Low- and…

Wydruk około 3,74 €–4,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
234
Polubienia
44
Ocena
0
P
PrintablesPark Jin

Crayon-shaped Crayon Container

A simple crayon container for children to keep their crayons safe! Hello! I'm a teacher, and I designed this crayon container because my students needed a way to organize their crayons. I wanted to create something fun so they would love…

Wydruk około 4,51 €–5,52 € nettoWstępna wycena jednego wariantu

Pobrania
230
Polubienia
50
Ocena
5
P
PrintablesPhiRequiem

Carabiner ring on Nalgene water bottle PLA, PETG (stl, step, gcode)

Carabiner Ring Attachment for Nalgene Water Bottles – PLA/PETG/Nylon Version A practical 3D-printed carabiner ring designed to secure a Nalgene water bottle to backpacks, gear loops, or climbing packs. Material Performance: This model…

Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu

Pobrania
226
Polubienia
29
Ocena
5
P
PrintablesSnuff Klko

Minerva McGonagall funko POP!

Print & acrylic draw

Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu

Pobrania
224
Polubienia
45
Ocena
0
P
Printables-Koso-

Lid for Woven Heart Container

I printed the Woven Heart Container for a gift, but I thought it needed a lid, so I made one! Smooth lid fits nicely and I added a rope style handle which matches the container style. Printing 0.15 mm layer height for good quality/speed…

Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu

Pobrania
215
Polubienia
69
Ocena
0
P
PrintablesApollo

Carabiner with integrated Airtag

This is a remix of this carabiner: https://www.thingiverse.com/thing:1008943 I really liked this carabiner for my keyring. I thought i could get rid of some clutter and integrate the airtag directly into my carabiner. Well it works. You…

Wydruk około 1,87 €–2,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
213
Polubienia
67
Ocena
4,67
P
PrintablesPeter Farell

Spring Spiraling Pot / Container

Spring Spiraling Pot / Container

Wydruk około 17,40 €–21,27 € nettoWstępna wycena jednego wariantu

Pobrania
208
Polubienia
72
Ocena
0
P
PrintablesLele88

Carabiner - Moschettone

A simple carabiner quick and easy to print. Printing time 11 minutes, used filament 1.03 meters Un semplice moschettone facile e veloce da stampare. Tempo di stampa 11 minuti, filamento usato 1.03 metri

Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu

Pobrania
207
Polubienia
12
Ocena
5
P
PrintablesHaggerty3D

Dice Container - Wooden Box - Print-in-Place

Summary I designed this dice container to resemble a wooden box. It has 4 individual hinged drawers that can hold up to 3 dice each. Additionally, the top storage is designed to fit standard 1" base miniatures. All drawers and lid stay…

Wydruk około 19,17 €–23,43 € nettoWstępna wycena jednego wariantu

Pobrania
201
Polubienia
110
Ocena
0
P
PrintablesAWSW

Philips / Saeco LatteGo milk container tip-over protection holder

Philips / Saeco LatteGo milk container tip-over protection holder. I am using a Philips Series 5400 fully automatic coffee machine since a few weeks and i like it a lot. Especially cleaning the parts is 10x faster and easier done than on…

Wydruk około 4,94 €–6,04 € nettoWstępna wycena jednego wariantu

Pobrania
195
Polubienia
24
Ocena
5
P
Printableskvriet

Earplug keychain container

This is a keychain container for your earplugs. The container consists of two parts that screw into each other. Print settings: Material: PLA Layer height: 0.2mm (otherwise the screw thread won't print correctly) Advanced: in PrusaSlicer,…

Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu

Pobrania
193
Polubienia
16
Ocena
4,8
P
Printablesmarin.cak

Container ship benchy

Just a container ship version of benchy with separately printed containers that fit in this ship The ship can hold six containers firmly Have fun

Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu

Pobrania
190
Polubienia
54
Ocena
5
P

Lego Duplo Container Ship (stable floating & no supports!)

Summary This is the a realistic and stable floating container ship fully compatible with Lego Duplo. Key features - Very stable floating container ship with good water holding - Floats well even with a full load (see pictures) - fully…

Wydruk około 2,58 €–3,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
188
Polubienia
32
Ocena
0
P
PrintablesAnthem212

Spüle Erweiterung Deluxe / Sink Extension Deluxe / Drainer / Kitchendrainer / Ablage /Cutlery

UPDATE 01.03.2022: Alternativ für gerade Oberflächen habe ich noch die vier Fußteile abgeändert und hinzugefügt. Zusätzlich habe ich noch Befestigungsklammern für den Korb hochgeladen für zusätzliche Stabilität. Alternatively, for…

Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu

Pobrania
180
Polubienia
39
Ocena
5
P
Printablesjan.sildberger

Trainer Front Wheel Stand for Mountain Bike remix

Fits to MK3/MK4 bed when placed diagonally.

Wydruk około 7,58 €–9,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
173
Polubienia
15
Ocena
0
P
PrintablesBooks

McMaster-Carr 5 Gallon Isopropyl Alcohol Container Spout

A threaded screw-on spout for the 5-gallon isopropanol drum from McMaster-Carr. Several spout designs available. Still in testing.

Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu

Pobrania
162
Polubienia
17
Ocena
5
P
PrintablesPhilip_TPD

Kinder-Küche kleiner Teller

Kleiner Teller für die Kinder spiele Küche

Wydruk około 4,08 €–4,99 € nettoWstępna wycena jednego wariantu

Pobrania
157
Polubienia
8
Ocena
0
P
PrintablesApfelhobbit

Dessicant container for Ikea drybox (Samla 22L)

Stable box for the desiccant which goes under the spoolholders of the ikea drybox (Samla, 22L). https://www.printables.com/de/model/98008-drybox-for-4-spools-ikea-samla-22l-based/files

Wydruk około 4,98 €–6,08 € nettoWstępna wycena jednego wariantu

Pobrania
157
Polubienia
16
Ocena
0
P
PrintablesOndřej Kleger

Compact kitchen dish drainer

My reccomended print settings: PLA or PETG 4 perimeters 7 top solid layers basic support needed (look at the picture) Suggestion: glue a self-adhesive rubber pads on the bottom

Wydruk około 16,49 €–20,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
156
Polubienia
16
Ocena
5
P
PrintablesLine Arc Line

Modular PTFE Joiner - DIN Rail Mount

I was tired of using double-sided tape to fasten my tubing to the back of my enclosure. I wanted something that was solidly attached, but could still be changed at a moment's notice. My solution was to use DIN rail to make a modular…

Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu

Pobrania
153
Polubienia
64
Ocena
0
P
PrintablesSteveS42

Tuna Can Drainer (Style A)

My wife has 2 styles of commercial tuna can drainers. But when the can company went to pull tab lids, the commercial models quit working as the diameter of the new lid was slightly smaller. I took some measurements and studied the…

Wydruk około 2,26 €–2,77 € nettoWstępna wycena jednego wariantu

Pobrania
151
Polubienia
21
Ocena
5
P
Printablesaki3d.ca

Houndstooth Container

I designed this cup with a houndstooth pattern for a friend, but I love it so much I am printing in different sizes for around the house. It can hold pens, dog bones, and really whatever you wish. It’s a cup. The design prints with no…

Wydruk około 15,39 €–18,81 € nettoWstępna wycena jednego wariantu

Pobrania
150
Polubienia
28
Ocena
5
P
Printableswoelpi

IKEA 365+ 10.8l sliding desiccant container for Drybox

This desiccant box uses the lid of the IKEA 365+ 10.8l. I wanted to be able to remove the desiccant more easily than other solutions and came up with attaching the desiccant container to the lid. It is assembled with doulbe sided acyrlic…

Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu

Pobrania
150
Polubienia
48
Ocena
4,5
P
PrintablesEttil Vrye

VW Caddy/T4 Car Headliner Clip

This is the small clip that holds the VW Caddy/T4 headliner against the ceiling, which usually break during dismantling. The original VW part-number is: 701867549 . I printed it in PETG, split in half, horizontally and glued the two…

Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
149
Polubienia
19
Ocena
0
P
PrintablesTache

Replacement Holder for SKÅDIS "Container with Lid"

This is a replacement for the original SKÅDIS “ Container with Lid ” item (803.359.09). The commercial version might fall out of the holder as you pull it out. This version provides a sturdy holder for the bin. Printing Note: Print…

Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu

Pobrania
145
Polubienia
39
Ocena
5
P
PrintablesRobertusMaximus

Death Valley APC Container Carrier

Death Valley APC Container Carrier For your up armoured death-dealing troops, deliver these contains that can brook no delays. The mutants, aliens, heretics, and worse are on the march. All converging on your beloved district inside the…

Wydruk około 2,29 €–2,79 € nettoWstępna wycena jednego wariantu

Pobrania
144
Polubienia
24
Ocena
0
P
PrintablesSirPrintsALot

Anti-Theft Systainer AirTag Holder

I wanted a good way to hide an Apple AirTag inside of a Systainer so I made a 3D model to print that would hold an AirTag inside the handle. Let me know if you have any ideas on how I could improve the design or a better place to hide it.

Wydruk około 0,23 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
143
Polubienia
53
Ocena
5