116 modeli
HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The orange Gyro 7 in the pictures is printed in 0.20mm layer height Printing Material: PETG (PLA makes the joints too loose when using the normal skeleton and too tight for the tight Skeleton . Assembly is also more difficult in PLA.)…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to do a jointed model for the Printables contest. Jace1969 (who has a ton of great SW models) had this ATST model, but it was a solid model so I diced it up and added 14 joints to make it into a posable design. I was trying to…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Lucky 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
Mini 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Easy 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Introduction: Thanks @soozafone again for sharing the Dummy 13 to the community. It is a great framework/foundation for facilitating other creators. After fixing the chest and make it more organic, I think it is time to improve other…
My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water This is a new design with print in place jointed legs, in the original the legs clipped on…
As small as I could go with functional, working ball joints. Fused the armor and frames together except for the interconnecting, moveable joints. 0.12mm layer 2 walls, 50% infill Auto tree support, build plate, critical Print time <45min…
在 Cinema 4D 中设计了一条时尚可爱的铰链蛇！眼睛是为多色打印预设的。A1 @mini 用户可以缩小模型以便于打印。希望你会喜欢它！~
I had issues printing the frame of Mini 13 with no supports, so I remixed it with some simple supports built in. Inspired by this for Lucky 13 by basti30 : https://www.printables.com/model/154760-lucky13-easy-print-without-brim Printed…
Hey everyone! Exciting news – we've just launched the AnkerMake Model Platform. Here, you can access models designed by AnkerMake users themselves, as well as our latest official designs. What's more, we're currently running a model…
Set of tools for your MINI 13 , LUCKY 13 , EASY 13 and DUMMY 13 Printable Jointed Figures. This set includes three groups of tools - basic household tools, kitchen utensils and garden tools: Basic tools (purple) Wrench Hammer Kitchen…
Set of tools for your MINI 13 , LUCKY 13 , EASY 13 and DUMMY 13 Printable Jointed Figures. This set includes the typical sword, pickaxe, axe and shovel - exactly as you know it from Minecraft :) Printing Without any support 0.15 layer…
This is a 1/3 scale ball jointed doll I designed mostly as a way for me to get acquainted with Blender. This model is my third blender sculpt and my first bjd, plus I've never actually seen a ball jointed doll in real life sooo.. have low…
A simple 3D scorpion I designed for Printable's Jointed Figures contest. It has 45 fully functional joints and can bend into hundreds of positions. Tips: — The ball joints may be hard to snap in. Use a pair of needle-nose pliers if you…
This is a Giganotosaurus model consisting of 11 parts, capable of limited articulation after assembly. The leg joints are printed as a single piece, with a 0.2 mm gap reserved for movement. If the joints cannot move, it means the…
"A hare is not a pet but a person. Hares are clever and brave and loving, and they have fairy blood in them. It’s a grand thing to have a hare for a friend. One doesn’t often, because they have a lot of dignity and keep themselves to…
NOTE - This is a failed project! I'm giving up on this design and moving on to other things.... I'm leaving the files up just encase anyone else is brave enough and wants to experiment with it. This is a Realistic Sunfish Jointed Swimbait…
this will make a great match with the sword
Print in PETG print with supports Print with brim infill 30% Print this before you watch Deadpool 3
I have modified slightly the distance between the joints in order to print it smaller. If you want to print it bigger it is better to use my other original file http://www.thingiverse.com/thing:1168292 Print instructions Category: Animals…
[update 2024-01-01]: i have fully redesigned the joint, now it is easier to print, the connection to the ball is stronger, and the screw is better too. I have not updated this model with it yet, i plan to do it in the coming weeks (also…
To assemble: Print the model. Glue 2 - 4 BBs, depending on how hard you want it to float, into each of the 4 weight chambers. (Leave a few loose if you want the bait to rattle) Bend and glue wire in for the joint hardware, line tie and…
A ball jointed doll with 5 points of articulation in the neck, shoulders, and hips. strung together with elastic. This doll also has interchangeable arm and leg poses. I'm a young teen creator who has always had a passion for dolls, and I…
This is a Spinosaurus model consisting of 13 parts, with an assembled length of about 28cm and capable of limited articulation. The leg joints are printed as a single piece, with a 0.2 mm gap reserved for movement. If the joints cannot…
"Intelligence, like a weapon, must be honed." MODEL: Recon SERIES: Blackbird STYLE: Anti-caution When running there are few things more valuable than information. This simple fact makes the RECON SHELL a lethal addition to any crew. The…
I've always had an interest in figures and when I found this model it was just amazing. The basic and wonderful look cought my eye instantly. But when ı printed it it was missing something…It was the articulation! It isn't that bad but…
This is a Carnotaurus model consisting of 11 parts, with an assembled length of about 25cm and capable of limited articulation. The leg joints are printed as a single piece, with a 0.2 mm gap reserved for movement. If the joints cannot…
This is my 3rd and favorite phone stand. Very stable with all sizes even with a standard iPad down to an iPhone 5S size. The stand is collapsable and will easily pack away if you are on the move. The joint is nice and snug with a very…
This is just a prototype for an idea I'm playing around with using the new technique of printing on fabric. I did not come up with this idea I am just trying to find new creative ways of using it. I believe the original idea came from…
A fish-shaped keychain, articulated and printed in a single piece. Practical and original, it's perfect as a daily accessory or a small gift. The simple and flexible design makes it pleasant to handle and durable for everyday use.
Print in PLA or PETG with supports. Be extra careful when removing the supports from the mask, as it is thin and could break with enough rough handling. I recommend organic supports for this model. Please add a make if possible! :)
Bad Bird from Samurai Pizza Cats. There's not much merch from this show so I decided to make my own. This is my first complex print project from 2016. The joints are simple, and he may need to be glued in order to hold a pose. The file is…
“This shell was built for war.” MODEL: DESTROYER SERIES: LOCUS DESTROYERS are designed for aggressive conflict resolution. They are military-grade tools of war engineered to seamlessly integrate a mobile combat suite, providing a RUNNER…
This is a jointed, shark-inspired mechanical toy. Its articulated, fishbone-shaped design allows you to effortlessly create your preferred poses. The files are only for private use, you can find commercial license on MakeItReal . Join my…
Introducing the Crocodile Hinge Toy Model – a captivating replica of a crocodile with seamlessly articulated joints that allow for effortless and flexible movement. This remarkable model requires no additional support or assembly,…
This is a Triceratops model consisting of 9 parts, capable of limited articulation after assembly. The leg joints are printed as a single piece, with a 0.2 mm gap reserved for movement. If the joints cannot move, it means the dimensions…
So that you don't make the same mistakes that I had done, I have split most all of the armature parts in half so that they can be easily assembled without risk of snapping the open ends of the ball joints. Parts are modeled to be…
2nd attempt at a doll, will update as i modify it. head will be reworked in the future; all limbs have the left side, duplicate and flip for the right side; made hands and feet so that they can be attached with s hooks; head has slots for…
Hello makers! Let me introduce little furry friend of Lucky 13. As the original model, cat is fully 3D printable, modular, jointed figure. All of the bricks were redesign by myself based on soozafone project, so they can be not fully…
A Santa version of the DUMMY 13
"It's not yours until you exfil." MODEL: Thief SERIES: Icon Only those who were there know the truth, but the story goes that the first THIEF SHELL was an inside job—a specialized SHELL developed in-house at SEKGEN to serve in a raid of a…
Holder for Magsafe charger that is mounted to the back of your monitor using the VESA100 mounting holes using two M4x25mm bolts. The backplate of my monitor arm is 3mm thick so you might want to use longer or shorter bolts depending on…
PLA or PLA+ will work just fine. You can print it with PETG if you like it sturdier. 92 mm inner diameter. 60 - 70 mm depth.
"Preparing scavenger protocol... R O O K O N L I N E" A ROOK frame is a scavenger's best friend. These base robotic frames are typically utilized by the UESC and various corporations for manual and heavy labor. RUNNERS have taken to…
Recommended settings: (100% scale and 0.4 nozzle) Material Parts PETG, ABS, ASA Layer height First layer 0.2 mm Other layers 0.15 mm Number of perimeters 2 Infill 20%, rectilinear First layer speed 25% of default Elephant foot…
Detailed face modified for 10mm glass eyes from here . The hair mesh will need to be modified after printing to fit properly, but it's depending on the eye because the eyes are handmade and do have some variation. Also made a human eared…
This is the ender 3 (not pro, v2, neo, se, v3, etc.) based on its GitHub page. I jointed the f3d file with rigid groups and as-built joints allowing for motion of the X, Y, and Z axes as well as other degrees of freedom (e.g. the…
This is still in beta face files, and other things might change. Infill 25% supports required tree supports recommended Print in PETG tessreact https://www.printables.com/model/716741-tessreact-for-thanos-jointed-figure/files
“Let's redefine death.” MODEL: TRIAGE SERIES: AUX This one's for the fixer, the never-diers, the ones who get it done. TRIAGE is no joke. TRIAGE is the one who knows they can't rely on anyone else because everyone else relies on them. To…
They are weird, they are cute, they are fun - and oh, they are wobbly ! A fanart design from my favorite game this year: Wobbledogs . Mingle is the first dog that you get in the game, a basic good doggo that teaches you how to play. I got…
"Movement systems primed. Let's cause trouble." MODEL: Vandal SERIES: Glitch Movement matters. Can you get in and get out, quick? Can you disrupt, annoy, distract, avoid? In a VANDAL SHELL? Yes to all the above. These troublemakers are…
Added an 2nd advanced form with more design, and Rocket Launchers. Assembly instructions: 1: Attach the dark brown parts to either side of the light brown parts 2: attach the remaining side of the light brown parts to the corners of the…
This is a Compsognathus model consisting of 17 parts, capable of limited articulation after assembly. Before you begin printing, please note the following: - Model Scaling: Scaling down the model is not recommended. However, depending on…
print in PLA or PETG (PETG has better joint quality) with supports. recommend reducing infill for less print time. Look closely at the pictures for assembly reference. Fun facts about scorpions because why not: Scorpions are arachnids…
This is the first model of our Modular Dogs Series - a collection of jointed dog figures designed for mix-and-match fun. Choose a body, a head, and arms to assemble your personalized pup. Please note this model require supports. Print,…
A new man has arrived in town for you to pose and play. it's very stick like so it doesn't take long to print ( Post a comment if you want me to make it less stick like). Post makes of your new amazing figure.
THE ROCK for MINI 13 Printable Jointed Figure
For whenever you want to make your Dummy 13 have more arms Hope you enjoy this model!!
SHELL MODEL: SENTINEL SHELL SERIES: Rampart ROLE: Defensive Strategist OVERVIEW: SENTINEL SHELLS are engineered for area and conflict control. They are tuned to sync with various gadgets and devices that extend the SHELL's core…
Arm joint for Ball Jointed Doll (BJD). Handmade Ball Jointed Doll project. 3D model Joint KIT_1 doll available in >> my shop << See >> 3D model Joint KIT_2 << See process doll creation:…
“Time to hunt.” MODEL: ASSASSIN SERIES: VOID OVERVIEW: "The unseen blade strikes first." Just one of many tenets of the ASSASSIN. Not that every RUNNER who outfits an ASSASSIN SHELL adheres to the same worldview, but the words remain…
Hello, this is my second attempt on my Clawtrap figure, this time I made him a more humanoid torso, gave him legs, and remade the hands and feet. Also, I recently played FNAF 4 (yes, it was terrifying 😭) but it heavily inspired me, so a…
Created by large corporations as a highly adaptable and agile robot to recover and deliver packages across various obstacle-filled environments, such as mountains, valleys, or forests, gone rogue due to faulty programming. Print in PLA or…
The biggest piece is the head. The Construction is Pretty straightforward, so I won‘t Include it. Print with supports and maybe brim, I recommend PLA or PETG. I printed mine in silver, but you can make yours any color, maybe even…
This jointed holder arm has the property that loosening the tightening knob loosens all three joints - the rotating middle joint, and the two ball joints. Conversely, tightening the knob tightens all three joints at the same time, making…
This is a remixed fingerboard with the “ MINI 13 Printable Jointed Figure ”'s feet attached to it so you can put your own MINI 13 on there. Now you can ride around on rails, ramps and more! Orientation is optimised for printing, print…
This is a Ankylosaurus model consisting of 18 parts, capable of limited articulation after assembly. Before you begin printing, please note the following: Model Scaling: Scaling down the model is not recommended. However, depending on…
I set up a Logitech C270 webcam to view my 3018 CNC remotely, and I needed some sort of holder for the webcam. I wanted a holder which held the camera at the end of some sort of flexible arm which could be easily re-positioned if…
A ball-jointed Pinocchio, loosely based off of the style in 'Shrek' . Designed for printing in SLA (If you try printing in FDM, please let me know how it goes!) You'll need a handful of rubber bands and some 'pins' to put him together. I…
Introducing Hydro 7! Say hello to Hydro 7, a fully printable, articulated, poseable, and modular action figure! Print settings: Material Armor Any Joints PETG, ABS, ASA Layer height First layer 0.2 mm Other layers 0.15 mm Number of…
NOT YET FLIGHT-TESTED. 6mm thick, and solid. Compared with Lapjoint's ironically one-piece model, this lap-jointed model is 80% thicker. Because I like my boomerangs stiff and not too light. I added four two-dime pockets and some…
I've placed my printer on top of a closet, and wanted to be able to see the screen from below. This solution utilizes the original mounting bracket and t-nuts. The screen can still be oriented upwards (in the original position) if you'd…
Ball jointed dolls (BJD) often come with a removable, magentic 'head cap' on the back of the head. This allows for customizable eyes, and removal of the head for easy dressing of the doll or painting of the face. However, it's often the…
DUMMY 13 Printable Jointed Figure skull
Introducing the Jointed BD-1, a remarkable addition to your figure collection. This joined figure is crafted with exceptional attention to detail and is sure to impress. Its design is perfect for makers who are looking for something…
A challenge for your printer!! "Braq" is a jointed dragon of 42 pieces. Once printed pieces only need an elastic cord 2 to 3mm thick to join them. Check the assembly instructions on this video https://youtu.be/pEerHkxMN2w Author:…
Normally printed at 0.2PLA on KLP1 No support needed i use ironing for smooth looking :)
This adorable tongue-out puppy features movable hinge joints for stress relief! Part of our "Hinge Toy Series" (coming soon: cows and pandas too!). Key Features: Two Sizes Available: Small size: First design release. Large size: Second…
I printed the body parts in matte PLA. The nose and connectors in glossy PLA. Eyes and buttons in matte PLA. The scarf is the original model printed in TPU. I used no glue for assembly, but that will be completely dependent on all your…
ive recently built new enclosures for all my printers an a couple of them ended up being pretty tight between the top of my delta printers an the top of the enclosures, the tops are on hinges an i can lift them but that doesnt really help…
see this model for instructions: https://www.printables.com/model/1025365-black-panther-print-in-place-and-posable I made this duck just to see how it would look. Not much to say about it. For the colored version, i added my bambu slicer…
AQR0N: A highly adaptable multi-purpose machine designed to carry out any given task and let nothing stand in its way. Assembly instructions are included in the pictures if needed. I recommend printing the Main body in PLA and the Joints…
This adjustable speaker mount is designed for light to medium satellite speakers and consists of four separate flat-printable parts to maximize strength along the print layers. The joints are connected using pins with 0.2 mm tolerance ,…
Multijointed clavicles for Carbon 13. I highly recommend using PETG.
printed at 20% infill and lowered parts below build plate -.5 mm just to make sure no air gap. will need supports on the v3abd for the fangs.
To assemble and print this lure: Print at 100% infill. Screw in eyelet screw size 4x8mm gently ( A dot of glue will work well.) Use 22 gauge wire for joints and bend ends at bottom and top. If you have any suggestions as to what I should…
Printer used: Creality Ender 3 Layer height: 0.15 Brim: yes Supports: yes Raft: no
Stronger body joint for MysticCreativity's Jointed Artillery Bot
A finger-jointed box with octagon windows.
Infill 20% get the full thanos here https://www.printables.com/model/716580-thanos-jointed-figure-beta
It's a ball and socket joint that's meant to be used as a fidget. Print settings Filament: PETG Adhesion: Raft Bed Temperature: 50 degrees Celsius Assembly Remove both pieces from the build plate and snap either side of the "ball" part…
I had trouble with the action figure toppling over when I tried awkward poses.... especially with high heels... I have anchored the toe to a removable base so when the figure is attached to the toe you may swivel it around. this is scaled…
Hard to asemble not reccomended for kids under 6.
I recommend at least 15% infill with snug supports NOT TREE SUPPORTS also with petg
![[WIP] Skateboard Feet for Mini13 Jointed Figure](https://media.printables.com/media/prints/1159869/images/8752901_3c721bdb-acaf-4f79-88c3-d27d4d284780_66326204-39b6-42c4-b206-0c263737175f/screenshot-2025-01-23-195040.png)
