1771 modeli
KEEP YOUR MOST VALUABLE THINGS HIDDEN WHILE YOU TAKE A DIP INTO THE SEA. NEW VERSION IMPROVEMENTS: LOCKER KEY FOR EXTRA SECURITY. NO THREADS (sand gets stuck and blocks them sometimes) BETTER AIRTAG LOCKING CAP PRINT IN PLACE STRONGER…
Wydruk około 16,25 €–19,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For whatever reason, the original was way too loose on my DIN rail, so I remixed it to fit way better, at least on mine!
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
A remix from @M's blank keystone, https://www.printables.com/model/239913-blank-keystone to which i added end-stops shoulders, and a few chamfers here and there. Previous design did not sit flush with my keystone panel as nothing…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
10" Rack tray to hold a Dell Optiplex 5070 (although other Optiplex models should fit) but also with an option to add a keystone jack (see my other models if you want to test print the same port to test). ** NOTE: These Rack components…
Wydruk około 11,03 €–13,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Check out this simple to use keystone panel that you can mount on a DIN rail. You can put it up so it faces up or down, but putting it down makes it easier to work on. It's super useful for keeping Ethernet cables tidy, especially in an…
Wydruk około 1,56 €–1,90 € nettoWstępna wycena jednego wariantu
Simple keystone frame for mounting on DIN rail.
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
Keystone modules for the DAP Audio MP-1 10 segments 2U rack frame available in both 1 segment (for 2 jacks) and 2 segments size (for 6 jacks). This module is part of a larger collection of module known as the MP-1 Rack: 2U Modular 19"…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena jednego wariantu
Vent keys for all radiators in your house. Classic key and lever key for to use less force. You can easily hide behind a radiator. Odvzdušňovací klíčky pro všechny radiátory v domě. Klasický klíček i pákový, kde není zapotřebí použití…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model does nothing but add a base to the AM waveform design from here by ABCDOMG. I've added the original file (sized appropriatly to fit the base) but other than this nothing was changed.
Wydruk około 5,13 €–6,27 € nettoWstępna wycena jednego wariantu
Some Keystone wall plates have thicker retaining bars, such as Leviton Commercial. This remix accommodates this. The file that this was remixed from did not have enough clearance for Leviton's thicker retaining bars which caused the…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
This is a refined version of my previous deep pocket clip, to better match some of the stainless steel suspension clips you see being sold online. This is a simple S-shaped design, making it easy to snap on your keychain. I printed this…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Spatula 3in1 - Spatula, SuperPINDA adjust tool and Prusa Allen keys keeper. I used a credit card (0.80mm) as the right measure as we see the instructions at:…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
keys hook version of "Motorcycle Helmet Hanger" by @MrBone66_567
Wydruk około 2,22 €–2,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d…
Wydruk około 26,82 €–32,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have created an educational 3D-printable model to help children explore the function of semicircular arches, inspired by the hands-on learning approach of Montessori. Based on the Roman aqueducts, this model is my entry in this 3D…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
Design Concept The Three Wise Monkeys figurine concept is inspired by the ancient proverb "see no evil, hear no evil, speak no evil". This charming design with winter hats adds a playful and whimsical touch to any collection. Purpose…
Wydruk około 3,69 €–4,50 € nettoWstępna wycena jednego wariantu
This remixes the thumb key design created by rfmarves. The main changes are a slightly larger thumb piece (I have fat thumbs) and the key cap more closely resembles the rest of the keys to make it match the design and fit in a little…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Phone and Keys holder in a 2mm chamfered design. Holds two phones in portrait orientation and 6 keys. Prints without supports. V2 added 3 screw covers that can be engraved with your custom text facing the build plate.
Wydruk około 5,22 €–6,38 € nettoWstępna wycena jednego wariantu
Recommended print settings: Material: PLA/PETG Layer Height: 0.10 Infill % : 15 Supports: Optional, depending on model/placement. Print Orientation: Default as modeled
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
This housing is for the new Stream Deck Module 32-key: https://www.elgato.com/ww/en/p/stream-deck-module-32-keys It's designed to sit at the same level and angle as the DaVinci Resolve Mini Panel. The Stream Deck Module simply slots in…
Wydruk około 3,64 €–4,45 € nettoWstępna wycena jednego wariantu
After removing a bunch of keys I didn't like how it left the hotswap sockets open and all exposed. Whipped up this quick and simple model, which I'm very pleased with. I suppose it really comes down to how well your printer is calibrated.…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Intro These Lovely Charms are small, elegant 3D printable charms designed for Valentine’s Day , romantic occasions and as a nice gift. The set includes three different models : Heart ❤ classic symbol of love Flower 🌺 sweet and timeless…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
This wall-mountable holder is designed for holding t-handle hex keys . A lot of standard holders have circular holes for the keys, but that results in the keys rotating in the holder and the bigger ones getting in the way of the smaller…
Wydruk około 17,36 €–21,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Decora keystone insert used for CAT5/6 ethernet connector. This version could be used with Leviton screw less wall plates Prusa MK4 printer Material: PLA Nozzle: 0.4mm Supports: Yes
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
The key holder, if you hate rattling keys this is ideal solution for you. You only need print the “full print model”. For assembly: (seven keys + one keyring) Bolt M3 16mm 3x + Nut M3 3x
Wydruk około 1,32 €–1,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My 3D model is a captivating creation that resembles an amplifier but, in reality, serves as a handy key holder. Using a 3D-printed audio jack that clicks into the holder, you can easily hang your keys, much like plugging in a guitar.…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
This keys holder will keep a few keys inside a compact case. It is designed to be opened and closed quickly thanks to the small embedded magnets. The additional guides and pins ensure the case won't open unintentionally in your pocket or…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
I kept damaging my Ethernet cable by bumping it with a nearby storage basket, so I wanted to find a wall plate that would recess the jack out of the way. None of the ones I found nearby fit Decora style wall plates, so I designed my own.…
Wydruk około 1,01 €–1,24 € nettoWstępna wycena jednego wariantu
Filler companion for simple keystone frame for mounting on DIN rail.
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
I needed only the small Wera Hex keys from 1,5 up to 5mm. So I remixed the model by jcq . Furthermore I had not the described magnets and thus had to adjust the magnets holes to 8x3mm an 5x2mm. Finally the hooks did not fit through my…
Wydruk około 2,41 €–2,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Selfprinted without supports Two dimensions for the thickness of mobile phones Author Ondřej Brzák
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
I was not happy with the bright LED lights in the RV kitchen, so I created a new light cover that diffuses the light from the bright LEDs inside the light bulb. I used clear PLA and vase mode. I tried it with and without fuzzy skin and…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
You can put an identifier or a small cap on your keys and still lose them. Put the whole bunch of keys under the cap and hang it around your neck. Everyone can choose their favorite colour. Especially useful for children. Print…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
I reworked by VW on the car Keys to make it better
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
If you like this fidget toy, check out my improved 4-button Quad Toggle fidget ! PopKeys is a “toggle” fidget with a mechanical twist… Pressing any key will release any/all other keys. Pressing the key down far enough will lock it down…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
I love Prusa signature color orange, black and gray. Inspired by these colors, I designed a Prusa-style mechanical keyboard. I also shared the Arduino code so that if you had a 3D printer, you could easily make a mechanical keyboard. All…
10-inch patch panel with 12 keystone module space. It's designed and created with OpenSCAD. The standard unit width is 44.45 mm, but to save some space for my very small network rack, I used 30 mm. You can change the module_count variable…
A 10-port keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! Updates 09 Dec. 2025: Added a reinforced version of this model. (Version 1.1) This model is part of a…
This model remixes tyler's keystone wall plate blank with minor adjustments so that is fits standard keystone jack openings and provides for stops for any faceplate or jack. See tyler's model here: Keystone Wall Plate Blank . Tyler's…
Created various steampunk gear-themed keys in Tinkercad (remixed from multiple sources). Rub 'n Buffed with antique gold and gold leaf. Check out my blog for more details on this and other steampunk gear I made:…
I DID NOT MAKE THESE I AM SIMPLY RE-UPLOADING https://github.com/Xyl2k/TSA-Travel-Sentry-master-keys 3D TSA "Travel Sentry" master keys Recently, pictures of TSA master baggage keys got leaked by the Washington Post and also PDFs hosted…
UPDATE 25/08/2026: Updated description. UPDATE 7/08/2026: Removed old files. MAJOR UPDATE 16/07/2026: 2.0 out now, no supports and better looks. SUPER SMALL UPDATE 22/03/2026: I've changed to xtrud3r, or x3 for short! Also changed the…
I needed a keystone slot for in a project. So i made this simple version, to be reused in multiple projects.
A new 3D figurine generated by AI, the three wise monkeys. Individual Version is available here Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld…
Winged keys inspired by Harry Potter with a bit of imagination I create two variation of keys - Flying keys and Lying keys so you can print which you prefer (flying keys are on the photos) For printing I used noozle 0.4 Filament - Crystal…
2024 revision: 16 port version now has cable strain relief I published a revised version of the 16 port model with cable strain relief features (and a few other small improvements)…
A keystone jack to hide the hole in your patch panel if you're passing a SFP+ module (or other cable) through one of the keystone slots. The center hole is 4.75mm in diameter, but there are .f3d and .step files available if you have a…
in STL is mickey mouse with hole for keys ring edit: 06.03.2021 added: 3mf file G-code for MK3/3S/3S+
This is a simple and modern-looking key hanger using the hexagonal pattern from the honeycomb wall system (by @RostaP ) as the base to hang and store multiple keys/items. It can also double as wall hooks for light items. This model is…
Roland PA-48 N Key-Hammer for White Keys These hammers always break at the same spot. The official spare parts are difficult to get and too expensive. To make your own spare part you need the weight from a hammer. This is easy to break…
This model is a simple 12 port patch panel which can be printed easily without supports. Print with 0.2mm layer height. Fits on a Mk3 printer if oriented diagonally. Will fit slightly bigger printers in default orientation. The model is…
HP Elite/Prodesk mini (G3/4/5, possibly later) 10" 1U rack mount with 2 keystone slots. 250mm wide faceplate.
This is a blank for a keystone wall plate or patch panel. Printed and tested. Printing in the supplied orientation without rotating it ensures that the part that needs to flex isn't flexing on a layer line. Rotating it will weaken the…
All Resident Evil 2 key locations: Where to find the Blue Spade Key, Red Diamond Key, and Green Club key. There are Resident Evil 2 keys to find throughout the game - the Blue Spade key, Red Diamond key or Green Club key are some of the…
Inspired by the great designs already out there, I made this adaption with added 140mm fan and optional keystone module (to house a HDMI keystone passthrough). I found that the heat generation on the 13th gen i9 is too much and this case…
Single, double, triple, quad and six keystone wall plates. No support needed.
My youngest likes to play with my keys but sometimes he forgets where he put them and all the family need to search... The solution? TOY KEYS! I'm so happy to not need to go looking after my keys and I guess other parents feel the same.…
I spent two months making all 13 Keys from the Golden Vault and now I'm sharing them! I was inspired by the beautiful art work in the adventure book and I thought it would be really fun to have real keys to hand to my friends! I have…
Since Logitech doesn't provide any spare keycaps for the MX Keys keyboard, and I didn't want to buy a completely new keyboard I decided to try and make a replacement my self. Once installed it works and feels just like the original. As…
A tested and working 3D model of a keystone connector. I'm providing this in case someone can find it useful. Tolerances are very tight for this print so I've made the model parametric so that it's easy to modify to fit your printer.
I created this tiny but mighty pocket clip to have extremely quick access to my keys and keep them secured to my pocket. Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a supporter.…
New version of the model 1.1, optimized for easier printing. Game from first episode: keys and knives Support is needed. You can print individual parts and then glue the entire model. I will add photos of the finished product as soon as…
Small version of a well known theme! so be proud and happy!
A 8-port, 1/2U, keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others…
Rack mounts for Dell Optiplex to mount to a 10 inch mini rack with keystone jacks. Edit: V2 Strengthened and optimized. Print in PETG
Changes I made the bigger on longer and changed the inner radius on both. The large holder has the sizes 6, 8 and 10 The smaller one has the sizes 1, 1.5, 2, 2.5, 3, 4 and 5 Pringing Nothing special, except, maybe make a color change…
Simple key wall holder/hanger for 8 keys. On the back of the model there is a bilateral tape place.
A modular, two-part 16 ports keystone patch-panel made to fit in 19-inch racks. Each module has 8 keystone jacks. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts.…
This is a magnetic mount for the Ikea Skadis Pegboard to mount allen keys. What do you need? 12x magnet round 6x3mm 6x magnet round 4x2mm (superglue) I printed this in ABS with supports for the mounts on the back. The mounts on the back…
Build a 3D printed vintage synth inspired USB MIDI controller with custom GUI, an OLED, pots, knobs and key switches using CircuitPython and Adafruit KB2040! Full Tutorial https://learn.adafruit.com/midi-keyset KB2040…
ErgonoMouse is a do-it-yourself 6DOF Controller (6 Degrees Of Freedom) based on Arduino. Or commonly known as "space mouse". It uses commonly available hardware (see “Required Hardware” 🡣) and it requires intermediate printing,…
🧰 Printable Hex Keys (Allen Wrenches) A handy set of 3D-printable hex keys designed for light-duty adjustments, demo models, or educational use. Sized to match standard metric Allen keys, these tools are great for visual demonstrations or…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
A 10-inch rack mount for the JetKVM. I made this model in 3 variants. For 1, 2 or 3 JetKVMs. Each variant also has versions with keystone slots. A huge shout-out to JaredC01 for the original mount, which I used as a base for mine. His…
Fits Leviton and other Cat5/6 (RJ45) Brand Keystone Jacks
Edit: If you have some weird-***-shaped computer like @Emplar_201570 , this model might not fit. Apparently it's my responsibility to check that. Prints without supports! I printed it in ABS, but I guess PLA is fine as well (as long as…
A modular, two-part 16 ports keystone patch-panel made to fit in 19-inch racks. Each module has 8 keystone jacks. This is the beefier version of the regular 19-inch modular keystone patch panel , for those who need the extra strength. I…
have 3 type patch panel patch panel NUC - some NUC higher than 1U and i dont want to create specific shelf for every of it, so i make this type to fix it by make more space under keystone (14.5mm) patch panel with label - read below My…
Works great with my other panels :)
Do you need some keystone blanks to avoid having holes in your keystone patch panel? Then look no further! With this model you can easily fill those voids and have a nice looking rack! Do you like my models? Consider buying me a coffee ;)…
This is a customizable keystone wall mount from https://thingiverse.com/thing:6647 Many thanks to https://www.thingiverse.com/jsadusk for providing it. Included STLs are for 1, 3 and 5 keystones for a tapered headed 3.5mm screw. Use the…
My Kids needed some keys to play with.. Made it.. They liked it..
Simple legs I designed and have been using for over a year now
I wanted to print 4 of the Key variations but in a large quantity and fast with minimal post processing. I simply imported the models into the slicer, split them into their separate objects, scales accordingly so they merged well then…
I needed access to a few more USB ports on my Voron 2.4. I already had the USB keystones on hand from Amazon https://www.amazon.com/gp/product/B07Z94HYFG?th=1 There is very little space inthe honeycomb to mount anything, so I designed…
VER.2 of this design is a step forward. It improves mount's stability, rigidity and it does not break when inserting and removing from the DIN rail.…
Well, now your mini 13 can bust open doors now 👌
I added a base to the voronoi hand to turn it into a jewelry ring holder! The fingers are good for rings and holding keys (size the hand appropriately), the voronoi holes are great for earrings, and the thumbs/fingers in general good for…
Several designs of a shut-off valve for medicinal oxygen tanks or any tank with a similar mechanism. You can leave them attached to the tank for a semi-permanent shutoff mechanism.
Basically this: https://store.ui.com/us/en/category/accessories-rack-mount/collections/rackmount-keystone-blank-insert/products/uacc-keystone-blank-insert-th Update 20250726: added v2 version that might be bit stronger, did not try them…
this is a 19" 1u patch panel for your rack , you can bolt it together whit some nuts and bolts (m4). brim recomended supports not necesery print whith the front on the bed you can also print something else from the collection and it will…
Logitech MX keys under desk holder. I found this really useful when I want to get some extra desk space when not using the computer. Also it protects your keyboard from dust when not in use. This is a remix from a model from Thingiverse.…
it is largely based on Foden's design , which it also fits together with. I have also made a model for the Unifi Switch Ultra (USW-Ultra)
Removable trolley coin key. 50c, 1€, 2€ coins. Insert directly and rotate it out to remove. I made this about a year ago, I didn't know how common they were at the time I made them so I never bothered to upload them. Finally uploading…
Inspired by the original Balancing Acrobats , this redesign takes the challenge to a whole new level. While the original focused on vertical stacking, this version introduces wild, multidirectional chaos. The unique geometry allows you to…
This is a straightforward, support-free patch panel model offered in 10-port and 12-port variants. Designed for easy 3D printing at a 0.2 mm layer height. With a width of 254 mm, it fits diagonally on a Mk3 printer and fits larger…
![ErgonoMouse [Free version] - 6DOF Controller Knob & Joystick with Wheel, Buttons & Keys](https://media.printables.com/media/prints/973725/images/7443301_6431622c-6203-4049-abb5-c021b4241c1f_e177f1da-39c9-4328-8e49-8818ce495155/promo-knob-free.png)
