635 modeli
10-inch patch panel with 12 keystone module space. It's designed and created with OpenSCAD. The standard unit width is 44.45 mm, but to save some space for my very small network rack, I used 30 mm. You can change the module_count variable…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For whatever reason, the original was way too loose on my DIN rail, so I remixed it to fit way better, at least on mine!
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
Blind plugs for your keystone patch panel.
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Intro Keystone is a calm but surprisingly challenging balancing game for two players. Build a wall from small, asymmetric stones — each piece is different, every round plays out differently, and every move matters. You can play together…
Wydruk około 9,85 €–12,04 € nettoWstępna wycena jednego wariantu
Model This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d…
Wydruk około 26,82 €–32,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
5.5mm VDC Jack Keystone adapter for racks or wall mounts. Printed in PETG, no support, 100% infill.
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Single Keystone modul for installation in furniture or similar with 32mm hole diameter
Wydruk około 16,12 €–19,71 € nettoWstępna wycena jednego wariantu
I kept damaging my Ethernet cable by bumping it with a nearby storage basket, so I wanted to find a wall plate that would recess the jack out of the way. None of the ones I found nearby fit Decora style wall plates, so I designed my own.…
Wydruk około 1,01 €–1,24 € nettoWstępna wycena jednego wariantu
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
A 10-port keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! Updates 09 Dec. 2025: Added a reinforced version of this model. (Version 1.1) This model is part of a…
This model remixes tyler's keystone wall plate blank with minor adjustments so that is fits standard keystone jack openings and provides for stops for any faceplate or jack. See tyler's model here: Keystone Wall Plate Blank . Tyler's…
I needed a keystone slot for in a project. So i made this simple version, to be reused in multiple projects.
2024 revision: 16 port version now has cable strain relief I published a revised version of the 16 port model with cable strain relief features (and a few other small improvements)…
A keystone jack to hide the hole in your patch panel if you're passing a SFP+ module (or other cable) through one of the keystone slots. The center hole is 4.75mm in diameter, but there are .f3d and .step files available if you have a…
This model is a simple 12 port patch panel which can be printed easily without supports. Print with 0.2mm layer height. Fits on a Mk3 printer if oriented diagonally. Will fit slightly bigger printers in default orientation. The model is…
HP Elite/Prodesk mini (G3/4/5, possibly later) 10" 1U rack mount with 2 keystone slots. 250mm wide faceplate.
This is a blank for a keystone wall plate or patch panel. Printed and tested. Printing in the supplied orientation without rotating it ensures that the part that needs to flex isn't flexing on a layer line. Rotating it will weaken the…
Inspired by the great designs already out there, I made this adaption with added 140mm fan and optional keystone module (to house a HDMI keystone passthrough). I found that the heat generation on the 13th gen i9 is too much and this case…
Single, double, triple, quad and six keystone wall plates. No support needed.
A tested and working 3D model of a keystone connector. I'm providing this in case someone can find it useful. Tolerances are very tight for this print so I've made the model parametric so that it's easy to modify to fit your printer.
A 8-port, 1/2U, keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others…
Rack mounts for Dell Optiplex to mount to a 10 inch mini rack with keystone jacks. Edit: V2 Strengthened and optimized. Print in PETG
A modular, two-part 16 ports keystone patch-panel made to fit in 19-inch racks. Each module has 8 keystone jacks. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts.…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
A 10-inch rack mount for the JetKVM. I made this model in 3 variants. For 1, 2 or 3 JetKVMs. Each variant also has versions with keystone slots. A huge shout-out to JaredC01 for the original mount, which I used as a base for mine. His…
Fits Leviton and other Cat5/6 (RJ45) Brand Keystone Jacks
Edit: If you have some weird-***-shaped computer like @Emplar_201570 , this model might not fit. Apparently it's my responsibility to check that. Prints without supports! I printed it in ABS, but I guess PLA is fine as well (as long as…
A modular, two-part 16 ports keystone patch-panel made to fit in 19-inch racks. Each module has 8 keystone jacks. This is the beefier version of the regular 19-inch modular keystone patch panel , for those who need the extra strength. I…
have 3 type patch panel patch panel NUC - some NUC higher than 1U and i dont want to create specific shelf for every of it, so i make this type to fix it by make more space under keystone (14.5mm) patch panel with label - read below My…
Works great with my other panels :)
Do you need some keystone blanks to avoid having holes in your keystone patch panel? Then look no further! With this model you can easily fill those voids and have a nice looking rack! Do you like my models? Consider buying me a coffee ;)…
This is a customizable keystone wall mount from https://thingiverse.com/thing:6647 Many thanks to https://www.thingiverse.com/jsadusk for providing it. Included STLs are for 1, 3 and 5 keystones for a tapered headed 3.5mm screw. Use the…
I needed access to a few more USB ports on my Voron 2.4. I already had the USB keystones on hand from Amazon https://www.amazon.com/gp/product/B07Z94HYFG?th=1 There is very little space inthe honeycomb to mount anything, so I designed…
VER.2 of this design is a step forward. It improves mount's stability, rigidity and it does not break when inserting and removing from the DIN rail.…
Basically this: https://store.ui.com/us/en/category/accessories-rack-mount/collections/rackmount-keystone-blank-insert/products/uacc-keystone-blank-insert-th Update 20250726: added v2 version that might be bit stronger, did not try them…
this is a 19" 1u patch panel for your rack , you can bolt it together whit some nuts and bolts (m4). brim recomended supports not necesery print whith the front on the bed you can also print something else from the collection and it will…
it is largely based on Foden's design , which it also fits together with. I have also made a model for the Unifi Switch Ultra (USW-Ultra)
This is a straightforward, support-free patch panel model offered in 10-port and 12-port variants. Designed for easy 3D printing at a 0.2 mm layer height. With a width of 254 mm, it fits diagonally on a Mk3 printer and fits larger…
I have another advanced version of this that has various sizes (30, 32, 35, and 40 to ensure your adapter will fit). https://www.printables.com/model/886799-rj45-ethernet-cable-rj45-keystone-mount I could not find something to protect the…
This is an add in RJ45 keystone connector for drop-in use inside an enclosure. It should however be printed at a slant so that the the overhangs will print properly and then no supports are required on the inside of the connector. In your…
M3 mounting hardware. Tried with several generic keystone ports, seems to work well enough.
Cut up some paper and throw them in. I also cut up some plastic to stick in the gap on the front to protect it.
A 16-port keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Do…
The HALO Keystone print is divided into two main parts connected by small block (I recommend gluing them together). It is not necessary to print the glow, but it enhances the overall impression of the print. The glow can be printed as…
Box for a single Keystone adapter. Can be used for a RJ45 adapter or other connectors that follow the keystone standard. Prints without support. Use 0.2mm layer height. Category: Electronics
Remixed from dual version: https://www.thingiverse.com/thing:4273415 IG post: https://www.instagram.com/p/CHvzaRlB7cl/
I created this parametric model from blueprints, and I've been using it for a couple of years without issue. See the photos for the 3 sizes I use the most (1, 3 and 4). Fusion 360 link: https://a360.co/4cxypP1 Printing: without supports…
Aufputz Patchpanel für 4 mal Keystone RJ45. Um die Stützstrukturen zu sparen habe ich das Panel in mehreren Bauteilen gezeichnet. Leider habe ich es noch nicht drucken können da ich gerade Dienstlich unterwegs bin. Wird aber gleich…
These Models are for Ethernet Outlet Plates or Covers for one, two or four Keystone Ethernet Couplers or Jacks. I've included models for both a standard sized Outlet Plate and an enlarged or XL Outlet Plate. I recommend printing with 4 or…
24 Port Keystone Module Panel tailored for 1U rack space. I included the full .stl and a version with a dovetail cut. The dovetail cut version is 249mm in length. 253mm diagonally. It printed very well on my P1S and is sturdy.
A remix from @M's blank keystone, https://www.printables.com/model/239913-blank-keystone to which i added end-stops shoulders, and a few chamfers here and there. Previous design did not sit flush with my keystone panel as nothing…
10" Rack tray to hold a Dell Optiplex 5070 (although other Optiplex models should fit) but also with an option to add a keystone jack (see my other models if you want to test print the same port to test). ** NOTE: These Rack components…
Turn on supports, print on it's side. If your using an actual wall plate, you should consider using the original, it'll work with most of them and be a little sturdier (wider tabs). Remixed from:…
Check out this simple to use keystone panel that you can mount on a DIN rail. You can put it up so it faces up or down, but putting it down makes it easier to work on. It's super useful for keeping Ethernet cables tidy, especially in an…
Hi, Today I introduce you inline network waterproof connector which utilize standard keystone adapter. Items needed: 1x connector middle 2x connector cap 2xM20 gland 2x 1,5mm O-ring gasket (optional) 1x Keystone connector Assembly process…
just a simple single port wall plate for ethernet with a RJ 45 keystone
I was trying to mount a keystone jack in a unique location using a typical single gang US electrical cover, and it was much too large to fit in the space. I recreated the mounting mechanism and put it on a small disc. It holds the jack…
I couldn't find ANY keystone jacks that had been designed for a Coax (Cable TV F-Type) coupler. I knew I could buy them at the hardware store for a couple bucks, but you can 3D print one for pennies. So I decided to design one. Hope this…
1U 12x Keystone ports with or without shelf to match the Modular 10" inch server rack project I recommend printing the test piece first to ensure your keystone modules fit well, as this was designed to fit a CCS brand module.
This is a remix of joostns “Dual RJ45 keystone wall mount” to fit better on my circumstances. I changed the rotation of the keystone mounts to make it more easy to unplug both, the keystone module and the rj45 cable. I noticed that the…
Keystone inserts for 2-pin MicroFit 3.0 to get GND and 12V from powering Stealtmax from the printer. There is also 3-pin version in case you want to get GND, 12V and 5V for Stealtmax. MicroFit connector is secured in the keystone using…
Moved some parts from @marsf_1338819 and removed fillets to fit 1 more keystone Keystone are on the Right, but could make a Left version if requested. Should fit in any 10 inch rack that has at least 213mm inside spacing
Simple keystone frame for mounting on DIN rail.
I really liked the original ESRack system design created by @EvilProphet . I created a module for keystone connectors from the Blank Module The ESRack system includes the following components: Mounting Brackets - used to install the unit…
Note : If you cannot remove the pegboard from your networking cabinet, this design will not work for you. Needed a patch panel for my networking cabinet and couldn't easily find one that would fit the 6"/12" mounting holes in it. So, I…
This a remix of rainb0w_wheez3's 8/16 port Keystone patch panel made to mount into a Leviton Structure Media Center cabinet. It flexes a bit in the mounts when using normal plastic push pin mounting connectors, but seems to hold up well…
This one is not meant to be printed but serves as a cutout in case you want to embedd a Keystone module into any part. Just substract this part from any plate to create a keystone socket.
Remix with minor fixes to NewProggie's JetKVM mount with 8 keystone modules.
Keystone modules for the DAP Audio MP-1 10 segments 2U rack frame available in both 1 segment (for 2 jacks) and 2 segments size (for 6 jacks). This module is part of a larger collection of module known as the MP-1 Rack: 2U Modular 19"…
This model allows you to insert a SC or LC connector into a keystone hole. Other keystone converters (not by me) USB Type A female COAX Blank See also (made by me): Between-tables-rack-mount Power distribution box LAN-party cable…
10" rack mount for Netgear ProSAFE Gigabit switch GS108 (maybe others). It has one kestone slot on each side of the switch. Designed to fit my 10" 2020 rack. When inserthing the switch the sides will need to flex out a bit in the rear,…
A 5 port 6-inch keystone patchpanel for your tiny lab! This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print Settings Rafts:…
1U Mount for two Philips HUE Bridges that can be connected to the internet (and power) using a PoE splitter or a keystone. The button on the bridge can also be made accessible while the unit is mounted using the button pusher. The parts…
This disc is in no way a Keystone clone, you can expect it to be slightly over stable and have way less glide than a Keystone, great for headwind fighting If you want an authentic disc golf putter experience via this print, then please…
Für ein Project brauchte ich eine Halterung für SMA Buchsen in einem Keystone Feld - Hier ist es :)
Description: Allows to mount FX-USB and FX-HDMI1 keystone adapters inside of standard Voron Skirt. Compatible with: keystone FX-USB (EAN: 5902887017513) - voron-skirt-keystone-inside-usb.stl keystone FX-HDMI1 (EAN: 5902887005220) -…
Designed for use with the UCG-Fiber Rack Mount by @Mauker. This panel provides keystone jacks for the 1 x 10 Gb RJ45 WAN port (isolated on one side by the power supply bracket) and 4 keystone jacks for the 4 x 2.5 Gb RJ45 LAN ports on the…
Reinforced 10 ports keystone patch-panel made to fit in 10-inch racks
The original Keystone Slot from @domrim_121160 had a few issues for me. The Keystones didnt really click in. They came loose very easily when pushing on the front. The overall size with 5mm borders was too large for my taste. It still…
Some Keystone wall plates have thicker retaining bars, such as Leviton Commercial. This remix accommodates this. The file that this was remixed from did not have enough clearance for Leviton's thicker retaining bars which caused the…
10" rack mount / shelf for Dell Optiplex Micro / MFF Series 5 with a hole for a keystone module. Models that should work: 3040, 5040, 7040, 3050, 5050, 7050, 3060, 5060, 7060, 3070, 5070, 7070. The rectancle on the rear right side is to…
A basic 4 port keystone panel including wall mount holes
This is a set of decora keystone wall jacks. I found that I needed a different combination of slots than what was offered already online. So I created a project with multiple plate backs. This is a simple project and much cheaper to print…
Hello i made this very simple but effective RJ45 keystone holder. this part can be implemented and mixed with other 3D designs that need a RJ45 connector to them. recommended to print with PLA and not with ABS. ABS is more prone to…
I took the existing model and added a hole that fits the USB-C power connector and a keystone jack to clean up how it looks in my rack. Keystone is very useful for passing Ethernet back to another device, in my case my Eero router that's…
EDIT Jun 2025: Updated models 9 Jun 2025. Improved the power cable cutout and increased the rigidity of the models in the mid section where they join and across the PSU holder. EDIT 2: Nov 2025. I am not able to do more mods on this. A…
I wanted to add a USB-C header to the patch panel on my homelab server but was very disappointed in all of the existing offerings online. Most seemed like total garbage (running at USB 2.0 speeds, not reversible, etc). In the end I opted…
10 inch rack compatible mount for the Lenovo m720Q will (Likely) fit any M700 series Lenovo. Comes with Keystone mount for easy networking. Not recommended to be printed in PLA as the mount will split around the rack-ears. Higher infill…
This is a keystone blank insert for a keystone jack in a wall plate or keystone panel. There are many others available; this one prints a little uniquely and I use it as a base model for specialized adapters. My printers have 0.6mm…
To secure the computer to the mount, you need two M4x6mm screws. There are options for 2 couplers, 1 coupler, or no couplers. The model can be accessed on OnShape here .
Designed specifically for use with the NavePoint 22U 2-Post Open Frame Rack with Casters (SKU: 00404145). Other similar models sold by Navepoint may work just as well but I can not verify. Let me know! The holes on the sides looked like…
A blank module for keystone frames, can be used to cover an unused port or as template for custom keystone modules. Thanks to Rdw5e3 for the initial work :)
12 keystone patch panel for 10" rack + test piece to test fit. Blank keystone module. Cable pass keystone moduly in 3 / 6 / 9 mm. SMA bulkhead keystone module. Toggle switch keystone module. I recommend printing the test piece first to…
This was specially design to hold Belden's CAT6+ keystone . But will very likely work with other similar style keystone connectors. Nozzle = 0.4mm Layer = 0.3mm Perimeter = 3 Infill = Gyroid 15% Support = can be done without, but if…
Revised Left side model 20260215 - Inner screw holes did not line up as intended. There is also a remix that fixes this problem in a slightly different way. See Link Below:…
24/08 V5 added. All now printed and fitting 26/08 V6 Rear added width guides. 26/08 Added Shelf Support. 2 M4x4x6 heated insert. 2 supports needed each side and something to bridge between to make a shelf.
Leviton SMC 6 & 8 Port Keystone bracket, smaller to fit better on a Lulzbot Mini 2 build plate and take less time.
I made this model mainly because I wanted a patch panel to fit my Mikrotik RB5009 in the same 1U space.
NOTE: This is v2.0. If you were looking for v1.0 or 1.1, click below: v1.0 v1.1 New in this version: The main new option here is the keystone jack slot in the base. This can be used with, for example, an ethernet jack for quick connect /…
Onshape document: https://cad.onshape.com/documents/5bc97312a51da9e236468819/w/34a2f9b8ae90cc6a43fbfad0/e/d003d2046b7c9fd87884f0af?renderMode=0&uiState=6592346d0af0de3b844c8dc6
![[RE-REMIX] 10-inch Rack Mount for UniFi UXG Max | UniFi UCG-Ultra | UniFi UCG-Max | 3 Keystones](https://media.printables.com/media/prints/adc6ccdc-6eff-4ddd-ac0f-4e95ccabe13a/images/9627747_37c38b0b-0449-4e4c-bd06-d9ab1999649f_1fc4f0c2-020e-40a5-b818-cb80370ed233/pxl_20250420_201749755.jpg)
