1169 modeli
This is a wall mount for KLICKfix bike accessories, like bags and baskets. The mount fits for original KLICKfix with dimensions 85 mm x 35 mm. It's made for ⌀4 mm screws. If you have good bed adhesion you can print this without supports.…
Wydruk około 1,83 €–2,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lampenhalter für Fahrradkorb von KLICKfix, für Handelsübliche Lenkerlampen, da der Korb vorne am Lenker die Lampe behindert, habe ich einen Halter für den Korb entwickelt. Dieser Lampenhalter ist so nicht zu kaufen. Gedruckt wurde der…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
I recently bought some airtags for keeping track of my stuff. One thing I really wanted to keep track of was my precious Urban Arrow cargobike. I thought about attatching it to the frame, but wanted somewhere more discrete and settled on…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
I needed a replacement for the original cross member, as mine was broken. The part is a bit thicker as the original one, but fits the model nicely.
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
I found the available fan-attachments for the RF100 take up to much space around the printhead, and also sometimes don't produce enough airflow. This cooling solution utilizes a radial fan design and can be attached to the printhead using…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Deutsches EU-Kennzeichen Lang und Einzeilig mit Spasstext realitaetsnah “MAK-ER 101” UPDATE: added "MAK-ER 1" More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…
Wydruk około 1,71 €–2,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This enclosure requires no additional hardware. If you print from gcode / 3MF file, there is filament change command added to swap colors. You can print in two or three colors. This works even if you don't own the MMU! You will just have…
Wydruk około 3,99 €–4,88 € nettoWstępna wycena jednego wariantu
Wanted to attach my phone to Gopro handlebar mount! Works great Sorry if something doesn't work its my first file
Wydruk około 4,53 €–5,54 € nettoWstępna wycena jednego wariantu
When visiting football matsches of Eintracht Frankfurt in the Waldstadion I never know where to put my cup. Luckily I use to sit directly behind a fence, so I could make this to an opportunity for me. So I designed this cup holder to have…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Renkforce RF100 is really an interesting little machine, sturdy, cheap and comes with a set of tools for printing - tools which would soon be found all over the place. Time to do some tool management. This Toolholder is small enough…
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
This sensor mount is designed to connect most Sparkfun Qwiic enbaled sensors/breakout boards to the Experiential Robotics Platform (XRP) Kit by clipping on the sides and connecting to an open Qwiic port. The model is designed to be 3d…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
Breakfast Club : Locker Magnet : John Bender. takes a 10mm by 3mm magnet. I may make a series. This would be the Criminal. I think the others are the athele, the princes, the basket case, and the nerd. ill see if there are any stand out…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
As much as I like seeing a PCB populated with components, I really don't like handling them directly when they're powered up. No matter what the voltage. So I decided I would make a case for the Sparkfun AVR Programmer . I'm sure there…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a nice little enclosure that I designed for the Sparkfun Decade Resistance Kit 13006. It includes printed knobs and a faceplate so that only the selected resistance digits are displayed. I have included the Fusion 360 file if you…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
XRP Sensor/Display Tower Originally designed to mount Sparkfun Qwiic 1.3" OLED and the ENS160 Environmental Sensor, this mounting tower, can be adapted to any standard sized Sparkfun Qwiic sensor and/or display. The mounting tower snaps…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Box designed for outdoor assembly of sparkfun qwiik KIT-15209 rfid reader. Printed and assembled. I have tried to design this so water that enters the box should not reach the circuit board. Cable is to be pulled thru wall from inside of…
Wydruk około 3,93 €–4,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Uses an Ikea bell cloche (Morgontidig), to stack on a Drakfrukt or 4 ¾ Forenlig plant pot. It's great for keeping the cats away when growing catnip indoors. Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have…
Wydruk około 4,76 €–5,82 € nettoWstępna wycena jednego wariantu
Print: For a multi-color print (as in the example photo), three layers are needed for the “Cover”. The heights of the layers are: 1mm, 2mm, and 1mm. Assembly: The slit for inserting the cover into the main part is exactly as wide as the…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Frankfurt (Germany)- coat of arms 3d model multi-colour for single filament printers. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner locating pins are NOT printed.…
Wydruk około 2,41 €–2,95 € nettoWstępna wycena jednego wariantu
This 3D-printed desk organizer is designed to work with Gridfinity by Zack Freedman, and the module inspiration comes from my original desk organizer system . Each module in this project is 6U tall and fits perfectly on 2x4 Gridfinity…
The Clickplate is a Gridfinity baseplate that doesn't utilize magnets. Instead, it secures bins with four small arms per square. The grip is quite strong, as the layer lines interlock with each other. Here is a Video of it in action. Here…
Edit: I just found out that @jerrymk_985120 made the OG Clickfinity . That's where all the magic happened. Sorry I didn't acknowledge all your hard work earlier, Jerry. I couldn't have done what you did. Recently found NoWarrenty's…
This print is a good way to test your TPU, PLA, ABS, etc. After the stickman prints, you can color in the eyes to give it some pop. Or you can change the filament when it gets to the eyes. Don't forget to like this model! Make sure to…
Use an M8 24mm flat washer for heat insulation. You can also add a nut on top of the washer for more protection. Printed with filamentum timberfill rosewood 1mm nozzle
Print details: Material: PLA Recommended layer height: 0.10mm Supports: yes Infill: 15% [Englilsh] https://www.thingiverse.com/thing:2635032 1:12_Kettenkrad model by compon I made a Remix of the following. -No need to paint by using 3…
1:42 Scale German tank destroyer from WW2. There's no moving parts, it's just one solid part. It should print in the orientation I have already sliced it in for maximum strength of the gun barrel. I won't be uploading the Panther tank,…
Kickstarter campaign is live right now over at https://www.kickstarter.com/projects/martinschneider/blockface-a-stamp-kit-to-explore-typography-and-more You can pledge for a DIY kit there if you don't want to source all the materials.…
Small cases for Luckfox Pico Pro/Max (RV1106) and Pico Plus/Mini (RV1103) You can add a piece of clear filament in the hole near the usb-c port to guide the indicator light through (for Pro/Plus/Max). There is also a version without the…
About Brickfinity Brickfinity is a Gridfinity-inspired solution for Ikea ALEX storage units. It's specifically sized for the 6-drawer wide ALEX unit (804.854.23). Because it's sized uniquely, Brickfinity is not compatible with Gridfinity…
3D Printed Backflow Incense Material is PLA 。 FB： https://www.facebook.com/3DPPark/videos/1204277066349363/ Print Settings Printer: CR-10 Rafts: No **Supports:** No Infill: 10 Post-Printing ============= cura1 cura2 cura3 How I Designed…
Plaque d'accueil pour caméra piéton. Reste solidaire du gilet support. PETG privilégié.
Meet SpinDeck Fidget, a 3D-printed stress-relief toy born from the world of skate culture and magnetic magic. It’s made of two mini skate decks, each packed with 8 strong 8x3mm magnets that click, spin, and dance together with every move;…
I wanted a ramp that basically ANY RC mini monster truck could backflip from - so I created it! The right side (in the picture) is a constant curve that goes past 90*. This makes backflips EASY. The left side is a steep ramp (partially to…
I have created this model of the KF-51 Panther tank to print.
This funny egg cup man brings a smile to your breakfast table. Not just at easter. The small character holds your egg while sitting with relaxed legs – perfect for a fun and playful breakfast setup. The design prints easily and does not…
Maybe you like the Original Clickfinity Refined but think it uses too much filament, or maybe you were just looking at different Gridfinity baseplates and found this. Either way, this might be what you are looking for. Clickfinity Refined…
Warrior Cat. Riverclan Hawkfrost.
Absolutely not my best design. 🫤 I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures…
Sd.Kfz. 234 Ver. 2 kitcard 1:100 scale model German eight-wheeled armored reconnaissance vehicle used during World War II, known for its speed, mobility, and distinctive turret design. The Sd.Kfz. 234 Ver. 2 is a kit card model – all…
In celebration of ZombieHedgehog's birthday, I designed this waffle. He at waffles on stream to celebrate and I only thought it fitting to design something to go along with the theme! This floppy design is a little different from my other…
SKF 6000 Series Ball Bearing Archive
Dive into the architectural elegance of Frankfurt am Main with this 3D model, showcasing the city's iconic skyline! Model created using OSM as well as manually reconstructing several buildings. The Model is completely square. I printed it…
A printable and improved (in my opinion) version of the Peter Jones Klickfast Belt Dock in all sizes offered. Featured using my TYT MD-UV390 Klickfast stud . Features Top centred Klickfast dock connector with retaining mechanism Resizable…
First release of my modular rack system. Very plain at this current stage, only empty modules and bricks. You will need to understand basic CAD to get use out of the system at this stage. The included STEP file only includes blank…
I found the KlickFix adapter https://www.thingiverse.com/thing:717890 from LocalwarCorp a while ago, but when I need an adapter with holes in a different location, I couldn't do it properly. So I just measured the one I printed, and…
Heckflügel für Worx Landroid
Backflow Incense This Backflow Incense is designed with Meshmixer. Nuts of the top is used for heat insulation. You also can use anything for heat insulation. Cute Buddha Bank （寶寶佛） by clavenmoo from:…
Klickfast compatible dock to mount on a 25mm strap, for example part of MOLLE or common backpacks. Print settings: 0.12mm give better results on the middle part of the clip. 0.2mm are still fully functional. Printed with PETG. 6 wall…
Modular router plate for the Bosch GKF-12V. Highly inspired and based on thing 3707881 by EpicFazer. I wanted a plate that I could use for different purposes, without having to disassemble the entire thing every time. It also has the…
Ich habe es mit 0,1 mm Schichthöhe gedruckt, kann sicherlich auch mit mehr gedruckt werden. Wer einen Farbwechsel möchte, bei der 1,6 mm Schicht fängt das Logo an. I printed it with 0.1 mm layer height, can certainly be printed with more.…
SKF 6200 series ball bearings archive
Geetech PLA Matte BambuLab X1C Mit Supports
Press for burger patties in 135mm size. Every minced meat shrinks when cooked on the grill or in the frying pan. Depending on the type of meat, fat content and water content, the meat can shrink by 10% to 30%. That's why the press here…
Table of Contents Overview File Name Convention Instruction for Use How to use the .f3d file in Fusion 360 "Alt File's" Purpose Overview The primary change with his design is in the default ability to combine edges to the baseplate. You…
A simple model of a KFC Bucket, the model with integrated supports prints nicely on its own. Print Settings Printer: Anicubic Mega S Rafts: No Supports: Doesn't Matter Resolution: 200 Infill: 15 Filament: Prusament PLA Jet Black Category:…
The Harder and Steenbeck Ultra Airbrush nozzle has holes on the sides, therefore it is almost impossible to create a backflow for cleaning or mixing colors. There is an H&S Cleaning cap (127990), Reinigungskappe in German, but the…
Remix to make the bearing captive and improve tolerances - the original version did not account for 3D printing tolerances. Category: 3D Printer Parts
What is this? We all love our honeycomb storage walls! (credits to RostaP ) But there is one main drawback, that once the insert being inserted, they hardly can be removed . So I created an easy swappable insert system, that is still…
Hello, A Bosch GKF 12V-8 is a little bit challenging for milling a circular holes. None of the jigs for circles fits it. Therefore, I designed my own jig. The input requirement was a wide range of radius - usable for small tweeters and…
EDIT: initially forgot to include the wheel file, at the time of writing this its uploaded but hasnt rendered a preview and isnt included when hitting the "download all files" button yet, you can get it from the list of individual files.…
Please use a metal washer or some kind of insulation. Don't put the incense directly on the plastic. Don't burn down your house.
Deutsches Beispiel EU-Kennzeichen Lang und Einzeilig. More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…
Upgrade your gaming setup with this stylish and practical wall-mountable display frame designed for PlayStation and Xbox game cases. Featuring a convenient hinge mechanism, this frame allows for quick and easy access to your game…
This gearbox brace replaces the original skidplate. I made it in an attempt to solve the well known Tamiya ORV differential issue. The gearbox brace puts pressure on both sides of the of the differential. This should reduce the chance of…
Each filament shrinks a bit after printing and then you don't have to be surprised if the dimensions are too small. You can do something about that... With this model you can calculate the shrink factor of your filament and later create…
english version below deutsch Ein Stück Frankfurt - Bahnhofsviertel / Innenstadt / Westend - Skyline Cityview Ich habe mir ein Stück Frankfurt im Rahmen gebastelt. Der Druck stellt ca. 1 Quadratkilometer Frankfurt dar, inkl, markanter…
Rev C Update 1/20/22: Added a beefier grip, and adjusted the mode height a bit for better printing (either 0.16 or 0.20 layer height recommended). Also updated the lens mount to what I've been using on other cameras. ---------- Light and…
Input shaping test print for markforged kinematics. Follows the movement correctly to isolate steppers.
This case plunger design will allow the plunger to retract into the case column with a case in the plunge and not damage the case. NOTE: Currently only available for 9mm. However, I plan on offering plungers for other calibers as requests…
A quick remix of the wallet holder to fit a larger wallet and a set of keys. The key holder does go outside of the boundaries of the baseplate.
Eintracht Frankfurt Keychain The keychain was designed by me as a gift for my best friend. :-) We are both Eintracht Frankfurt fans! Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2X Rafts: Doesn't Matter Supports:…
This router base for the GKF18V-8 gets you a two hand operation of the router for more control when chamfering your workpieces. Furthermore you get a swiveling dust catcher, so the chips that are flying from the router bit get stoped and…
A simple Picatinny / NATO rail adapter meant to hold an Olight Arkfeld Pro flashlight and green-laser. Absolutely not intended for duty/precision use – I threw this together just to be goofy by attaching a light and laser to a…
This is a simple wrench I have created to assist in opening and closing the Frankford Arsenal Tumbler. It utilizes 2x m5x50mm bolts to fasten the handle to the wrench. There are two different handles for your choosing: Slim Handle - if…
Passt für das Tamiya DT-03 Chassis, besonders für den Neo Fighter Buggy und Racing Fighter Buggy. Die Befestigung des Heckflügels erfolgt mit den im Karosserie-Kit enthaltenen Teilen. Der Heckflügel wurde von mir aus TPU Shore 98A mit 25%…
Bosch GKF 12V-8 Fräszirkel in der Länge (Radius) verstellbar. Ihr wollt große schöne Kreise fräsen? Keine Lust auf Stichsäge? Kreise bis knapp 2m Durchmesser sollten kein Problem sein. Die kleine Platte kann über drei (oder sogar mehr)…
Das Wappen der Eintracht in Ø250. Einfach weiße Basis drucken und dann nach 2mm Filament auf rot (oder schwarz) wechseln
This is a movable model of the Sd.Kfz 302 "Goliath" in a scale of about 1:6 (~25 cm). The Goliath light charge carrier, a self-destructive minitank (German: Leichter Ladungsträger – Goliath), called by the Allies "beetle-tank" was a…
A set of "filters" to be used as 32mm darkfield filters for microscopes Category: Parts
A theoretically simple but in practice quite complicated part to for connecting a TYT MD-UV390 (optionally plus) to a KlickFast style dock. This is a minimal approach to produce a small but secure alternative to a standard belt clip…
The Paulskirche was consecrated in 1833 and in 1848 became the seat of the first German National Assembly, on whose drafts the present Basic Law of the Federal Republic of Germany is based. At present, awards ceremonies as well as…
Note: Here are some remixes that works better than this model, so maybe download from there? Remix by NoWarrenty on Printables Additional features joinable with edge and corner connector pieces built-in screwholes comes with more sizes…
a mallard rogue for my dragonbane game remix from the adventure dragonbane mini makander and RN Estudios orwin
The clickfinity baseplates by James Boone are amazing https://www.printables.com/model/719455-gridfinity-clickfinity-baseplate-w-connectors , but they are not designed to be flushed with a vertical surface. (You might also want to…
A circle cutting jig to cut circles from 80 mm diameter to 300mm diameter (minus half the radius of the cutting tool). It has a adjustment slider to set the radius, and a split adjustment to allow for you to set the radius and move into…
I had some issues installing SKF bearings and mainly dust seals on my forks on triumph street triple 675r. I had created and printed some variation of some fork driver I downloaded to 41mm. But, after successfully installing the bearing,…
To standardise all my equipment, I wanted my new Baofeng UV-5RH radio to have a Klickfast stud, so I fired up the 3d printer and printed out the Klickfast for Baofeng UV-5R by Hoopajoo on Thingiverse (…
Adding a cone like this to the center increases vortex action and cleaning efficiency. Similar concept to the commonly used funnel mod. Printed in PETG with 3 perimeters for strength, though printing in TPU would make for better…
I created a two fictional or alternative types of models of Panzerjäger Tiger (P) Ferdinand (Sd.Kfz.184) mit Krupp Maus II Turm mit 150 mm Kampfwagenkanone KwK 44 L38 in size - scale 1:100 for model makers to the dioramats or like a model…
This is a replacement prop rod clip for a Rev Industries (OEM brand for BAKFlip) hard folding tonneau cover. It can be installed by slipping onto the end of the rail and sliding into place, or by snapping it on at the desired location. In…
This is a battery Cover for FlikFlak Watches for Children. Very small Part, but now works for over a year very well! ----------- Dies ist eine Batterieabdeckung für FlikFlak-Uhren für Kinder. Sehr kleines Teil, funktioniert aber jetzt…
Ich habe den ersten Druck in PLA gemacht. Ich denke, PETG wäre noch besser geeignet, aber bisher funktioniert es sehr gut mit PLA bei mir. Hält bei mir besser als das Original. Support: JA Infill: 15% Layerhigh: 0,2 Brim: Yes I did the…
Scale 1:72 The model features a fully rotating turret mounted on a bearing for smooth movement, along with freely spinning wheels for added realism and playability. Assembly is simple and beginner-friendly: Glue the front and rear hull…
My smile is full of blades. This is a Legendary Hunter sword sized and changed to fit in the hand of a dummy13 Print settings are 20% infill and print flat
Did a renovation for an old Clodbuster and used a Blackfoot shell for this. As there is no proper interior available I designed a very simple interior to cover the cables and wiring and give it some more realistic touch. Some parts need…
Just a simple logo you can print and attach.
