232 modeli
Prusa Mini full bed calibration test model for 0.15 and 0.2 mm layers. No need to start calibration print after calibration print. Print once, calibrate once. Because this model takes a while to print and fills the whole bed, you can…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
Here is the Ultimate nozzle storage unit! This design was updated 04-02-2021 to include more model to choose between and the text has been made internal instead of external for nozzle size. This system covers 0.25, 0.4, 0.6 and 0.8mm…
Wydruk około 7,89 €–9,64 € nettoWstępna wycena jednego wariantu
Originally from https://www.prusaprinters.org/prints/27919-hive-strategy-board-game-for-2-players-mmu-not-nee/comments#comment-125268?utm_source=prusaprinters&utm_medium=email&utm_campaign=notif-print-comment-reply&utm_content=item Moved…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
About Tock The Ultimate 3D-Printable Board Game for Family Fun Are you searching for a unique, engaging, and genuinely useful 3D printing project? This is a complete, 3D-printable Tock board game that provides hours of fun for the whole…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Cerf Foret - 5 layers (modular) Dimension of a layer: 90x1mm Support spacing: 5mm between layers Layer 0: bi-color - yellow / black Cerf Foret - 5 couches (modulable) Dimension d'une couche : 90x1mm Support espacement : 5mm entre les…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
It's the same except I doubled the layers. The original one seems too thin to me. Layer: 0.2mm Nozzle: 0.4mm Top fill pattern: Hilbert Curve Print time: 3h21 Color 1: Yellow Color 2: White Color 3: Kheki or Grey etc Color 4: Red Color 5:…
Wydruk około 2,86 €–3,49 € nettoWstępna wycena jednego wariantu
Munich / Munchen Oktoberfest Bavarian sign in 3 colours/layers. Holes for mounting. Layer/colour changes built in. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
UPDATE 3.1.2023: added V2 version with different inner shaping → same external size & characteristics, quicker print Info: 🟠 round edge → longer edge → scraper lasts longer then other spatula types scrapers if it is less sharp on one…
Print at 0.3mm layer height. Print without supports. You should be able to see the strings in your slicer preview If using Bambu Studio make sure your wall generator is set to Arachne. See a video of the artwork here:…
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
This Rotating Rings optical illusion sits on a record player and spins. It gives the impression the rings are spinning on top of each other, rather than just rotating in place. I designed this after watching Steve Mould's video about his…
This woggle has the Boy Scout of America logo. It has a lot of details then you need to print with the smaller layer as possible if you want to appreciate the details. In my picture I printed with 0.12 mm layer and 0.4 nozzle using the…
Dakanzla is da' man with his awesome multicolor printed design. Unfortunately, I only have a single nozzle printer and I cannot paint worth a damn, but I still wanted some artistic oomph to my set. I really didn’t like the monotone sets…
Don't forget to hit the like button if this helps you :) Improved calibration prints with minor modification to connect all the printed squares for easy removal from the bed. (uses a 0.4mm line width) These prints work seamlessly with the…
Test para revisar primeras capas. Imprimir con altura de capa 0.2mm. Se podrá ver la calidad de la primera capa en una superficie de 120mm*120mm Se podrá observar la calidad en 5 Puntos repartidos en las esquinas y centro con una altura…
MetiKoro is a strategic board game for 2–4 players. This 3D-printable game is thoughtfully designed to be easy to learn while offering deep strategic gameplay, completely free of random elements. Update 2025-01-21: Added a large board…
This heart-shaped model has a layered design, offering a unique structure and visual effect to help relieve stress. It can be used as a decoration, a stress-relief toy, or a special gift—practical and full of creativity.
Rules (there are several versions) https://www.ultraboardgames.com/stratego/ultimate-stratego.php https://www.ultraboardgames.com/stratego/game-rules.php https://board-games-galore.fandom.com/wiki/Stratego There are many other Stratego…
Loved the original model, but wanted a version without the position letters on them.
*** Thanks for checking out this model! If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [Update Nov 11, 2024]: I just created a hard case to store all these figures.…
RULES: 2 players 10pcs →of walls/player, 4 players →5pcs of walls /player -OBJECTIVE: cross to the opposite side of the board to win -MOVE 1 step or PLACE 1 WALL to slow down your opponent -move only horizontally or vertically 1 square,…
My son asked me to help him with a school assignment where he needs to make a model of the layers that make up the earth. We found the awesome Textured Earth model by bld and chopped it in half with netfabb Free. Then I used OpenSCAD to…
From Argentina, Scouts with love! Here you have the complete logo from the Boy Scouts of America. You can find it built in 5 layers. I am attaching the SVG files for each layer. This way, you can reconstruct it according to your…
Yet another insert/tray for Caverna. It's remixed from these bits mostly: https://www.thingiverse.com/thing:3224685 https://www.thingiverse.com/thing:2588992 https://www.thingiverse.com/thing:3546391 I made some small modifications to the…
A model of the Layers of the Earth to scale. Originally designed for a Grade 12 project for an Earth & Space Science course to model the Earth's different layers. Could be painted by hand or with an MMU in PrusaSlicer to better…
Border pieces to allow using these models to create boards for 5-6 or more players.
3D model of the layers of a leaf, including the cuticle layer, upper epidermis, palisade layer, spongy layer, lower epidermis, and stomata. It is part of a project for my daughter's biology class. It is somewhat complex to print and the…
Inspiration: When printing @SH -s 🍂 Organic leaves set I realized that his Round Scraper just needed a bit longer “skirt” to help me out. So Egg Shaped Scraper was born. Just try these leaves from here:…
Monster from Diablo II Resurrected + Diablo I Slayer edit.
My FC Bayern jersey models - covering all players, goalkeepers, and the coach - are printed with planned color changes to capture the club’s iconic look. Printing starts with white (2 mm), followed by red (1 mm), and finishes with white…
Introducing Sir Layersalot! With the mighty sword ExCalibration, he leads the Knights of the Level Table. This mascot for Printed Solid was commissioned from the talented Carmelo Nazario ( http://patreon.com/thecreatorx3d ) Looking…
I remixed the Thin layers scraper (tiny+ergonomic) from SH to add a magnet so I could hang it from my X1 Carbon. The STL is designed for a tight fit using an 8mm x 3mm magnet but I have included a parameterized Fusion 360 file if you want…
I have been FDM printing mini's for a decade. I am publishing my latest settings. These are for MK4 but the settings should apply to any other printer. Updated June 2026: I made some changes as well as argued with AI for further insights.…
A model designed for extreme testing in vase mode. This tall, thin structure on a stable three-layer base pushes the limits of print precision and stability with minimal material usage. Perfect for height and thin-wall calibration tests.…
Compatible batteries are already available to buy on eBay. However, I already had components to make my own, and I enjoy designing things so I made this. I was also able to make a few of these for the price of one on eBay (since I already…
🌍 Model Overview: Earth Layers Globe with Stand A compact educational model of the Earth in two parts: 🧩 Pieces: Globe : A single solid print with an open section exposing the internal structure (Crust, Mantle, Outer Core, Inner Core).…
Jackaroo board for 4 players. Print 4 copies of the Jackaroo board. The T-bars lock the pieces together. Print 10mm with one colour then the last 1mm (10.2-11mm) print it using another filament colour. This last 1mm is a band around the…
This model prints well with PETG and just 3 layers at 0.3mm layer thickness does the trick. The grid comes off just stiff enough and bendy to be inserted into wall and snap back to flat. A brass wire or screw can be attached to grid to…
Suggested material: PETG
The game involves 21 chips (with numbers from 0 to 5) or 28 (from 0 to 6) or more. Game rules ( first version) The players take out five chips from an opaque bag or box and lay them out in front of them without showing the opponent. The…
Plaques pour rappeler les stats de base des joueurs humains et orcs du Blood Bowl Conception avec FreeCAD, récupération des jetons humain et orc depuis https://www.thingiverse.com/thing:3567571 et peinture par mes soins. Font pour les…
A cutter for two layer cookies.
A 210x220 0.5mm first 2 layers test. Usually when I print with 0.2mm layer height I do the first layer at 0.3mm so this would test the first 2 layers of the print, in the whole bed to see if there's anything unpleasant you might find…
Bring the classic Jackaroo game to life with this custom 3D printed board designed for 6 players. This unique design offers an enhanced gaming experience, perfect for family gatherings, game nights, and friendly competitions. The model is…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
This card holder replaces the original crappy cartons that the dutch blitz game comes with. It can fit 8 decks and it has a little spot for the instructions. I also have an onshape model if you want to copy it and edit it directly:…
A simple and elegant puzzle for a little brain-teasing. The part orientations are ready to print. The cube has 3 layers, so you can print them in different colors, or use the same color for extra difficulty. Hard difficulty. Printing…
Players room door hanger featuring the iconic character from the classic cartoon *La Linea (Balum Balum)*. The sleek, single-line illustration humorously captures the character signaling that Players room is occupied. A delightful…
Soccer Keychains Soccer Players Jersey
This is a simple model 50 x 50 x 1 mm. Print at 0.2 mm layer height and you have 5 stacked layers for calibrating your printer on the fly. Stacking layers when adjusting z offset can be useful as the first layer might look good, but when…
Print setting: 0.25 mm layer infill: of your choice, lightning 15% works well top layers: 4 or more (for nicer finish, due to the wide flat ceiling)
I really liked the complete screw box by AMK Karting however the labels were in French. So I recreated it and changed the label language and order. All of the screws, pads and bearings are in here as I went through the MK4S instructions…
The tiles can be configured for any of 2 to 8 player modes. Game rules can be found here: https://en.wikipedia.org/wiki/Tock To build this model, you will need: 32x cylindrical rare earth magnets 3x8mm 28x countersunk M3x8 screws 2x packs…
Hello friends from all over the world :) I like to use the thin layers scraper from sh, because it is an ergonomic and clever design. But because I always put my fingers in scraping direction, there is not so much space left so in some…
Full writeup and software: https://github.com/potatoworld/3x3-Control-Pad This is a simple 9 key + 2 encoder macropad that runs on a Pi Pico. Total build cost is under $30 if you shop smart. The case is 3D Printed and held together with…
This is the standard holder for the 4 layer version (20mm width) of the Victorinox swiss knife.
The DM9 Microscope has a very short range and larger objects will struggle to fit. This adapter solves those issues so you can solder motherboards without using a completely different mounting system. Installs seamlessly Personally made…
Yet another filament sample and caddy. Samples are 25x60x3mm. Layers are 0.4, 0.8, 1.2, and 3mm thick. Caddy can hold 25 samples.
This Earth Core Model is a layered 3D representation of Earth's internal structure, sliced open to reveal the crust, mantle, outer core, and inner core. Each layer is separated for easy printing, coloring, and assembly—perfect for…
I will be printing this on a Prusa MK3S at .20 layer height using lightning infill at 20%. This is the first model I have ever tried my hand at making. I basically took these 3 models and merged them together with Tinkercad. You will need…
Lovely & Romantic vase for your home decor. It goes well with my other models. Put some flowers in it and show your deep love :) The vase has a proper vertical hole and easily scalable. I recommend printing it in matte PLA for best…
This is my insert for wingspan / Flügelschlag for 1 to 4 players as that's the player count I play with usually. It supports vertical storage but doesn't fit sleeved cards. Content: 4 player mats - I used two double sided boards from the…
Standard dominoes can be played only between 3 and 4 players but if we double the number of tiles, up to 8 can play! These extra tiles also add more difficulty. Tiles The game consists of the 28 standard domino tiles (from double 0 to…
Dakanzla is da' man with his awesome multicolor printed design. Unfortunately, I only have a single nozzle printer and I cannot paint with a damn, but I still wanted some artistic oomph to my set. I really didn’t like the monotone sets…
Objective: The goal is to create a line of 5 tiles in a row, either horizontally, vertically, or diagonally. Player Setup: Each player selects a unique color for their tiles. Gameplay: The first player places one tile on the game board.…
A simple board game that is based on Tetromino/Tetris. Intended to be played with two players. English subtitled video should be uploaded within a week ;) The rule is very simple. A double-height peg will block the opponents' block to be…
Remix of pruisa for 0.6 nozzle Print instructions print interface layers slow with maximum fan for minimum adhesion
I designed this to need at least three color changes, set at each 1mm mark. dark-light-dark. You can use whatever colors you want! I have “avoid crossing perimeters” turned on because it seemed like a good idea, but I am not sure if it…
Case/holder K1 upgrade for active carbon filter (10mm two layers): Printed material: PLA/ABS/ASA supports required for case only. Filter can be purchase here: https://www.amazon.co.uk/dp/B07K9MN4QZ
For the longest time I couldn't figure out how to get first layers with invisible extrusion lines like how they are on the Prusa factory printed LCD covers. I don't know if this is how they do it, but this is what worked for me and…
Slightly remix of CATAN insert to fit parts that original insert couldn't fit: thicker hexes, more harbors and circular number tokens some of the hexes are stored in “wares tray” due to lack of other space (2x20pcs fit to their original…
UPDATE 10.03.2026: Thanks to @isudakov - I have missed 4 pieces from original set which is now fixed. New left side insert is uploaded and ready for download. Especially for @mCex9WfH_1831991 here is a custom storage and transport box…
I designed this to need at least three color changes, set at each 1mm mark. dark-light-dark. You can use whatever colors you want! I have “avoid crossing perimeters” turned on because it seemed like a good idea, but I am not sure if it…
I made this Earth layer model to my daughters specifications for a school project. We found an earth model and remixed it to add layers and a stand. Each layer has a hole for adding a flag for naming the layer. The hole is sized for a…
This is a remix of the separators orginally designed by Jared. but with two layers of bins which will occupy the whole space behind the top tray. Those bins can be used together as on the following sketch, or individually as each bottom…
Something spooky has appeared in the studio 👻 This is the first design in my Halloween series, full of eerie charm and layered depth. A haunted house under a glowing moon, surrounded by bats and leafless trees. When the lights go out, the…
Extra tiles for Triomino . With these extra tiles you can play up to six players (they can be used with fewer players as well). The tiles are designed as interlocking jigsaw pieces. The extra tiles have a mark in the middle should you…
Printed on Prusa MK3S+ Layer height : 0.3 mm Infill: 5 % Top layers: 5 Brim: 3mm for the big part
Fidchell is a modern reinvention of an ancient game. It takes 5 minutes to learn and a lifetime to master. But why not have a go and see what all the fuzz is about! Learn with the interactive tutorial on Fidchell.com Rules of the game are…
Introduction Hello, all. Thanks for visiting my model page! I initially started this project with a few simple goals: Create the smallest linear sliding fidget toy possible with FDM printing. (Using a standard, readily available and…
This is like a Duel Disk from Yu-Gi-Oh, but it's designed to be a practical to use system compatible with the modern rule set. So instead of looking like the Duel Disk toys or the ones in the anime, it's a lot slimmer and lighter so it…
Here is a support to store the 6 players version of the Dog Game. The handle of the drawer have to be glued using a 5 mm piece of filament as a dowel. The parts for the board can be found here:…
Simple container made only with outer walls. Print in " Vase Mode" Set "Slice gap closing radius" to 0.01 Use default profile PLA -> 0.2mm layer height.
This game is made for 3 till 5 players. Dimensions: 180x80x20mm A very simple & fun game. The goal is to gain 3 own discs of your color in a ROW or NEXT TO EACH OTHER. Please find the game rules below! if you need a perfectly shaped box…
Hey everyone! I’m really excited to share my latest project: a Stormtrooper layered art design that’s printed in one piece, using color swaps at different layers to create depth and contrast. The layered look doesn’t come from separate…
The game is made for 2 players. Dimensions: 140x140x10mm A very simple & fun game. Please find the ENGLISH and GERMAN rules below. There are also many YouTube videos that may help. What you need: 1x Board 1x Suricate 5x Termite towers 2x…
just another name with dual color layers Category: 3D Printing
Una serie di decorazioni natalizie ispirate al mondo di One Piece . Queste palline da appendere presentano i simboli iconici della ciurma di Cappello di Paglia, tra cui Rufy, Sanji e Robin, reinterpretati con un tema festivo. Perfette per…
Corey of CM Designs puts his own spin on this everyday object for us all to enjoy. He adds inspiration from and connection to the 3D Printing process with embellished extrusions for obvious layers. He connects those layers to a 3D printed…
Jackaroo board for 4 players. This is a super light version of the original one I made (Looks weird, but saves your more than 50% filament. Most importantly it does the job) Print 4 copies of the Jackaroo board. Slot/bar locking mechanism…
Beware: this insert has couple of limitations, I mostly made it for myself, but I thought someone else might find it useful as well. All the available inserts either ditch the game board in favour of the playmat or were designed for the…
Magnets Holder for the “Expandable Steel Sheet Holder” Works for both MK and MINI variants. Key Feature Easy installation: same as the sheet holder, find the right spot and screw it in place. Secure storage: uses Ø8×10mm magnets , tight…
This area control game is made for 2 players. Dimensions: 180x180x10mm A very simple & fun game. Please find the ENGLISH and GERMAN rules below. There are also many YouTube videos that may help. What you need: 1x Board 7x Tokens per Playe…
This is a remix of Robagon's distressed inner wall for the board game Gloomhaven. I thought the wall was cool and nicely matched the top view of the tile that comes with the game, but I wanted something shorter so that it seemed more like…
Protected storage for 3 round scrapers. Keep them clean, protected, and ready to use. Designed this case as I wanted to keep a couple scrapers in reserve so I wouldn't need to switch filaments or take the time to print just to get a new…
Scale to the size you want (original is 30 mm in diameter) print the two halves, and the middle sphere. click into place using hands or pliers.
print each stl in four copies. These are individual trays, where each player will have access to all their tokens underneath, and to the castles and cathedrals on top
This game is a new creation inspired by the traditional Shōbu which simply means "boardgame" in Japan. It is made for 2 players. Board size: 129x129x9mm. You need 4x boards. It is traditionally played with boulders but you can also use…
