2644 modeli
A cable clip for the LCD cables. Should be a nice tight fit and hold them very securely. Jan 21 - Added an upsized version. The original was supposed to move relatively freely, then be held in place by the cables. The upsized one should…
This model will NOT work with the new MK4S, XL (09/2024 onward) and CORE One injection molded parts! The new reworked model for the MK4S, XL (09/2024 onward) and CORE One injection molded parts can be found here:…
I liked the idea of the MINI 3 wing knob for the MK3 that @SethBon created. However, after I printed it, I realized that the thumb knob part is flat, and I prefer the indentation of the original part. So I pulled it into Fusion 360,…
Complete rework of my original Prusa MK4 / XL xLCD Knob Beauty Ring to work with the new injection molded parts from the MK4S, XL from 09/2024 onward, CORE One and CORE One L. Printed in Prusament PETG Prusa Orange 0.1 IS Fast Detail
It's specifically designed not to wiggle, as pre-existing LCD cable clips for the MK3(S) did and thus were unsatisfactory to me. The opening of the "hook" should point down for a clean look and easy insertion of the LCD-cable. If this…
LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…
LCD knob without the lever. It has the same taper as the original knob and a nice feel thanks to the ridges on the circumference. Print instructions printed at 15%, 0.15 detail
This is a replacement LCD cover that provides a mount for the excellent 4inch HyperPixel capacitive touchscreen. The screen slides under the holding clips snugly, gently bend the part to slot the screen under the second set of holding…
Please hit LIKE on my design if you download it so I get credit, thanks! This is a counter top enclosure designed to hold a 1602 LCD display run by an ESP-32 processor. There is also a spot for a LoRa transceiver. Fits these parts: ESP32:…
if you want your LCD Cables to look nice and organized, try out these, they pop right into the side of the aluminum extrusion. Print instructions i recommend printing in PETG to make them strong and flexible, layer height deos not matter,…
Modified the Prusa MINI LCD knob to fit the MK3. UPDATE: Prusa released this style of LCD knob with the MK3S+. You should probably just download it from here: https://www.prusa3d.com/prusa-i3-printable-parts/
Case & Brackets (2020 Extrusion) for 16x2 1602 LCD Display Screen Blue + IIC I2C Module https://amzn.to/3LPVWNE
XLCD display from Mk4 in color (MMU)
An MMU version of the display cover for the Ultimate Prusa case (you can actually use the cover without the casing). New: Since many have asked for it, I made the honeycomb pattern a little wider. Ultimate Prusa casing:…
Some Inserts for the Prusa lettering on the LCD Cover. I uploaded a test file too, so you can test whether the letters fit inside. If it doesn't fit, play around with the XY compensation. If you like check out my other designs too!
Simple cover for behind the lcd screen.
A simple and small control knob for the Ender 3 and Ender 3 Pro. PRINT SETTINGS Nozzle: 0.4 or 0.6 Layer Height: 0.20 or 0.3 Infill: 20% Supports: NO Material: PLA+
Prusa MK2S/MK2.5/MK2.5S/MK3/MK3S LCD surround in multicolor. As you can see I printed it in Prusa Orange and Black PETG. The LCD-Cover-Original-Mk3.stl is the original file from…
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
Kryt pro I2C displej 16x2: https://arduino-shop.cz/arduino/1570-iic-i2c-display-lcd-1602-16x2-znaku-lcd-modul-modry.html Print Settings Rafts: No Supports: No Resolution: 0,15mm Infill: 15% Filament: Prusa, DevilDesign PETG Post-Printing…
The official downloadable file found on Prusa site for printable LCD cover is actually for MK3 which has longer cutout window (85mm). For MK3S and MK3S+ it is only 80mm. See the attached photo for comparison.
My version of integrated circuit lcd cover for prusa mk3s+ Print instructions 0.2 - 20% infill prusament petg orange and galaxy black
The colour change is at the 1.80 layer at a 0.2 layer height with a 15% infill you can use the blank and Prusa and original Prusa covers for either the mk4 or the xl/MK4S/MK3.5S/MK3.9S/CORE ONE+/CORE ONE L+ add a like
This is a remix of the LCD Covers for Raspberry PI4 w/ Hyperpixel display. After reading some reviews about the existing ones being too tight and possibly cracking the display, I designed this one so that RPI w/ Hyperpixel simply slips in…
Having a cover that fits snug that will not move and slide is important to protect the LCD display Added by request Screen Cover without Thors Hammer Mjölnir If you like this please consider buying me a coffee:…
This was quickly put together to solve the problem of blocking the LCD when I don't want the light it emits. Unlike some of the other designs, this shouldn't leak light around the edges as the plate has 2 tiers, the first that fits nicely…
Remodeled the whole thing and wanted to give everyone the freedom to do adjustments themselves.
LCD Cover Display Hyperpixel 4'' MK3S+ RPI 4B CZ Můj vytuněný kryt pro Hyperpixel 4" a RPI 4B s krytem portů, Vyřízněte stěnu šestihranu. Jsou zde jen pro snadnější tisk. Displej S RPI pasuje fakt pěkně :) Snad bude čas i domodelovat…
This is a simple case for a 16x2 LCD with a pocket for a D1-Mini in the back. It has a cutout for the controllers metal-can to prevent overheating. Assembly M2 machine-screws inserted from the front side should self-tap into the posts in…
This was my first ever designed object using Fusion 360 and has been really popular over at that other "things you can print" site. At the time, we didn't have a lot of space and the printer lived in the bedroom. I was astonished that my…
can be printed in any color and any material. No support required, but if you have adhesion problems you should use a brim. bend the LCD cables like a U then insert the pointy ends in the clip and push on the back. once the cable is in…
Made a honeycomb version of the Prusa MINI display Printed in ColorFabb XT-CF20 4 perimeter 0,15mm Hope you like it.
Shorter LCD supports designed so that the MK3/S can fit inside an Ikea Stuva enclosure with a hole for the bed cables. There is one hole for each side, slightly smaller than the bolt. Use a m3x10 bolt to thread directly into the plastic.…
The housing was designed for a 2.8" LCD display. In the device under construction, simply cut a 52 × 90 mm opening and attach the housing using double-sided tape or plastic adhesive. The inserts used are M2.5 × 4 × 3.5. I printed the…
A simple cover made to hide the cables that come from the printer to the front Display out of the enclosure - Included MK4 Gcode - Printed in PLA because it's not structural but PETG could be better - Update 01-11-23 Added a longer…
Just a simple LCD Cover for Creality Ender 3 Neo
This is a LCD Cover for a Prusa Mk4. Colour change at 2.15 and 3.20. The word Prusa acts as a handle to remove the cover with ease. Enjoy.
A simple snap fit case for a 2.8" ili9341 LCD display opened in the back might not fit all displays, as there are differences among different manufacturers, please check the basic dimensions of your display first.
MK4S LCD to enclosure mount, this is to mount the LCD from the MK4S to the enclosure at the same level of case with feet. I printed this with the need of supports. so the parts taht apprear to look like ramps should face up and be the…
Für die Montage des xLCD (neuen Version) auf der Außenseite des original Prusa Enclosures ist ein Adapter notwendig da sich ansonsten die Türen nicht schließen lassen. Prusa stellt Adapter zum Download zur Verfügung ( Enclosure Printable…
Bored of the stock knob from your original Prusa printer? This one is for you! A round, spiky knob that provides a better grip, and a concave part for easier pushing. Also plug & play. Use a small lever to remove the old one, snap in the…
I loved the idea of using Octoprint along with a UI accessible from a touch screen. Though, all available solutions I found for the front panel are considering touch screens using Raspberry Pi’s GPIO interface. For me this was…
This remixed xLCD cover is best printed with 5 x 0.25 tools to ensure the logos are as sharp as possible, I have also enabled PETG supports on tool 6 with a 0.4 CHT tool. This has been tested on the R3 xLCD.
It's highly recommended to check the circuit board and the printed model together before you tighten the screws. Check the distance between the front plate and the LCD display while you are tightening the screws. There is a safety net in…
Remixed from ‘Creality Ender 3 Pro - Raspberry Pi 2/3/4 + LCD Enclosure’ by eoyilmaz, specifically v042 for Pi 2/3. Note: This remix only works for Pi 2/3 , not 4. When mounting it to the LCD panel, you should use only 3 of the original…
If slicing yourself, orient with the text face on the bottom Prints without supports Print in PETG Sliced at 0.15mm layer height using Prusa 0.15mm structural default settings for PETG at 245°C. Gcode provided is for MK3.5 * warning - one…
Mk3.5 LCD cover with printable version of the sticker, USB symbol, and reset button. I've noticed the footer gets slightly cut off at certain angles, so the LCD area is slightly expanded compared to the stock R3 version. A 0.25mm nozzle…
LCD Knob depicting Marvel Thor Hammer (Mjolnir) for the Prusa MK3S and Mini. It is printed in PETG in 2 colors with one extruder. the .3mf file is setup for the color change and ironing to make the top smooth. Note: With the research I…
For English see below. Dies ist ein LCD-Cover für den MK3.5 auf dem es auch gedruckt wurde. Es handelt sich um einen Mehrfarbendruck ohne MMU. Die notwendigen Farbwechsel werden von Hand vorgenommen, was problemlos möglich ist. Dieses…
Print MK3,5 0.2mm Structural Prusament Petg infill_25% perimetr_3 first layer_240°C/85°C other layers_245°C/90°C
Simple LCD cover inspired by others available, but with a small window to view the e stimated t ime r emaining (ETR) or ETC ( e st. t ime until filament c hange). I'm typically looking down on my printer, so there's a slight angled cutout…
Here you find another LCD Cover. It´s for an 4.3 Waveshare LCD with Raspberry Pi attached. It can be installed apart from the printer for e.g. under the Printer Encloser as I did, with 4x Wood Screws. In the pictures you see Rev. 1.…
Raspberry Pi 4 Case remix. Original from marchingknight11
Dieses 3D-druckbare Kombigehäuse macht aus einem 16x2 I2C LCD Display / LCD1602 und einem 3x4 Matrix-Keypad ein kompaktes Bedienpanel für Mikrocontroller-Projekte. Ideal für: Zahlenschlösser, Zugangskontrollen, Passwortabfragen,…
caja Arduino con hc sr04 y pantalla lcd 16X2, además cuenta con un interruptor y un puntero laser para saber donde estas midiendo
In concert with Javier M. G. s model here: https://www.printables.com/model/53164-prusa-i3-mk3-mk3s-mk3s-lcd-flat-cable-clip This cover snaps onto the clips and covers your LCD ribbon cables. This is a nice upgrade to hide unsightly…
just an edit for the flat lcd cover
Temperature and Humidity Monitor for my Prusa Mini+ enclosure, although it is standalone device (requires USB input for power) so can be used anywhere you want to monitor temperature, humidity and barometric air pressure. A small,…
I've designed this for my Prusa mk3s+ enclosure, so that it fits the printer's LCD screen, as well as the official Raspberry Pi 7" touch screen , and a Raspberry Pi 4 mounted on the back of it. That way I can take the full advantage of…
This model allows you to mount the xLCD screen using the existing mounting arms from the Mk4 Printer parts to the front of the LACK enclosure while maintaining access to drawers under the table top or if you have the Lack enclosure…
Are you constantly worried about your scraching or even worse damaging the LCD screen on your Prusa printer ? Do you tiptoe around it like it’s a fragile artifact in a museum? Well, worry no more! With my simple yet effective LCD cover…
A customizable xLCD mount for both Core One+ and Core One+ L printers. It can be printed on both as well, you just need to rotate the mount to fit the bed of the Core One+. It can be configured in multiple ways: Allow the install of a USB…
UPDATED #1 - 07/11/2023: Added USB lid for the USB socket . I found this great design (remix at the bottom) that inspired me to make some detachable modules and new versions of the LCD cover to support WiFi signal improvement (see my…
I had the Idea of removing the LCD screen from inside of my enclosure and attaching it to the Lack table. So I designed this plate to hold it. You need four M3x18 screws, wich you can take from the spare parts of your Prusa Printer. The…
In concert with Javier M. G. s model here: https://www.printables.com/model/53164-prusa-i3-mk3-mk3s-mk3s-lcd-flat-cable-clip This cover snaps onto the clips and covers your LCD ribbon cables. This is a nice upgrade to hide unsightly…
The original design customized with the logo of fab lab siegen. For those who want to customize their Original Prusa with the logo of their local Fab Lab Siegen.
This is the same as @MalikDrako_2006414 files except the m3f file has been tweaked to print on a MK3S+. So if you are desperate to print on the MK3S+ use this otherwise use the original after upgrading to the MK3.5. I had a lot of…
Velikost pro jiné tiskárny můžete upravit v prusa sliceru.
I wanted another variant of the LCD-screen holder which also fits a toggle switch and a USB-outlet. This LCD-screen holder fits a variant of a toggle switch with a diameter of 11.8mm. The USB-outlet has the dimensions of 17.95*11.0mm You…
Hier ein Modell-Satz um das XLCD Display des Prusa MK4 und MK4S schnell an den Drucker oder vom Drucker abzukoppeln und es Außerhalb vom Druckergehäuse zu verwenden. Die Kabel habe ich mir alle neu erstellt um die originalen Kabel zu…
I did not like the knob design for the flat xLCD cover . Most other knobs are to big and to short or does not nicly fits to the flat design.
Now that I've switched from the MK3S+ to an MK4S, I needed another Quick Release for the Original Prusa Enclosure. There are already a few quick releases for the MK4S on Printables, but I wanted another one like mine for the MK3S+ . This…
I bought a 7-inch “ Display-H ” from aliexpress to use as a display for my home assistant server monitoring dashboard, and then I made this mount to place the display on the inside of the server rack door, attached to the door frame so…
I got this screen that is super compact with the Pi and had fun designing a case for it. The idea was to do it with one part so it can easily just slide in and out. The screen was called the "4.3inch HDMI LCD (B) - 800x480 - IPS -…
Not much to say, I love the adaptive cubic infill and wanted to show it off.
Updated to have no bottom in the screen protector. This accomplishes two things. First and foremost the new style LCD fits. Other than that it makes it easier to keep neat and tidy without having tiny bits of filament caught in the tray…
Dual color print; MMU is not required. I used black and orange, but you can choose any colors you prefer.
I dont have space in front of my Prusa XL, so i decided to mount the LCD on the side. BOM foam rubber 3 mm thick 4x T-nuts with spring M4 or M3 4x M4 or M3 x10 socket head cap screw Recommended parameters Nozzle size: 0.4 mm Layer height:…
This is still work in progress. I make this for my Prusa XL as a dock for my DryBoxes supporting the RFID reader from the Project SpoolSense.org This enclosure is part of the SpoolSense ecosystem – an open-source project for tracking…
Added a donation button for the people who want to buy me a coffee. Prusa Mini LCD backcover Protects against dust and dirt and keeps your PCB save Fits exactly Use a 3mm - 25mm screw Nice upgrade Step files included Print instructions…
I like my LCD cable neatly organized, even when it's less visible on the bottom of the Mini(+). I liked Fredslund 's Prusa MK3 LCD Cable Clip on my MK3S, so I remixed it to use for the LCD cable on my Mini+. Like the original, they pop…
Stand to reposition the original LCD display to the top base. Reduces the printer footprint and modifies the angle so it's easier to view and operate. Uses original mounting points of the screen too. Screen holds in place respecting…
ESP32 2.8inch Touch IPS CYD LCD Screen Case I recently purchase this screen from Ali Express. It has a very unimaginative name "ESP32-2432S028R" which makes it hard to find. For that reason it is also known as the Cheap Yellow Display CYD…
This is a very easy-to-print, easy-to-install SNAP-ON back cover for the SOVOL SV06 3d printer. To install, simply disconnect the ribbon cable from the LCD controller board, snap the cover in place, re-connect the ribbon cable, and you're…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen and auto scaling to accept up to 1920x1080 input resolution. Waveshare 7inch HDMI LCD (H) Mount…
LCD Cover for the Original Prusa Mini. Protects the screen while you don’t use the printer or covers up the light at night when you are sleeping in the same room. Print it in any material or color, just make sure it isn’t translucent.…
Housing for 16x2 LCDs with an I2C controller on the back. The front panel is universal and fits all versions of the back-part (45° or 90°). Select the correct hole diameter for your LCD screen (M2 or M3) and the display cutout (big or…
A mount for installing a Prusa i3 LCD controller on the outside of a LACK enclosure. Compatible with MK2 and MK3 LCD assemblies. Not compatible with MK4 LCD assembly. Description This is a redesign of zamky's Prusa i3 LCD Holder that…
(Update 3/27/2024) Added Pi5B Bottom/Lid. (Update 11/14/2019) Added Pi4B Lid. (Update 4/12/2019) Uploaded IGES model files for easier remix. (UPDATE 3.28.2019) Pi3B Case: improved structural strength by slightly thicker walls. Desktop…
This is a remix of the '7 inch LCD Case' by arrowmeiwaracing, which can be found here. I was looking for a case for my Elecrow 7 inch LCD screen to be used as a touch interface for my Octoprint server, I came across the original by…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Waveshare 7inch HDMI LCD (C) ) Mount options: My desktop mounts (45-degree / 60-degree) with Pi…
Introducing the redesigned xLCD cover, seamlessly integrating the display flush with the front face for a sleek look. Equipped with a next-gen RGB LED diffuser and compatible with default Prusa xLCD printed supports. Tested on various…
LCD cover that works with the awesome Hyperpixel 4" touchscreen. No fitment issues from other similar covers. This is for: MK3/MK3S/MK3S+ Letters stl is also included if you want to make this a multi color print. Update 2021-02-06: I made…
Hi everyone, this is a case for a 20x4 lcd. It has an I2C on its back. As you can see the cables for the I2C going out on the left side. It has holes on its back to mount it where ever you want. Bring front and back together with screws.…
LCD cover for prusa MK3SMMU2S & MK2S Print instructions LCD COVER STL FILES: 1- You need to download only these files lcd-cover-mk3s_assy.stl or lcd-cover-mk2s_assy.stl knob_assy.stl 2- Split the parts into PrusaSlicer to assign extruders…
Case to fit a Raspberry Pi 4 paired with a 7 inch LCD screen. You can also attach a 40mm fan. You will need: Raspberry Pi 4 Heatsync for Pi 40 mm fan (…
This is a fix for broken for the Flashforge 5M that are notorious to be fragile and break. This can be printed out. It fits under the back cover to hold it into place and is just a bigger version of the original design. You will have to…
Reshaped the LCD-knob of the MK3+ to make the tactile feel more like that of the MK3S. So I made it a bit smaller, fattened the arms a bit and made an indentation. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter…
A better scrolling LCD Knob. Video: https://www.youtube.com/watch?v=Czk4atg710c Print instructions Filament: Prusa PETG Colour: Orange (depends your favorite) Fill: 100% Support: No Filament temperature: 225 - 230 Bed temperature: 85-90
