185 modeli
This makes it possible to use your Galaxy S23 Ultra with Razer Junglecat controller. The original design is very variable and can be customized, so I measured my Galaxy S23 Ultra and through multiple iterations I finally reached a version…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
Replaces x-carriage-cable-holder-R2.stl for the MK4 with a fixed mount for a USB NozzleCam. This specifically was made for this borescope camera but can be adjusted for others with a different diameter. Printing parameter: Material: PETG…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For GL18 bottlecaps
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Beschreibung Ich habe ein Hybrid Modell erstellt nachdem es bereits den einen oder anden Dosen- und Flaschenverschluss gab habe ich die beiden kombiniert. (der Dosenverschluss kann auch zum Öffnen genommen werden. Drucken kann man ihn aus…
This reusable stopper will keep insects and sand outside your bottle, while keeping most of the drink inside. It works with opened bottlecap bottles - and can be printed in PLA! Stoppers come off with a satysfying pop, while the loop…
It's a small pick stand which turns your guitar-pick into a Telecaster body. It should fit all picks up to 2mm thickness. You can print it as it is and won't need support. It's a good idea to place the seems in line or even use the…
A fully printable Telecaster with a hexagonal pattern in the body. The guitar is the same size as a normal Telecaster, so normal parts fit. All the parts are connected with pegs and glue, so no tools are needed. Printing All parts are…
This is a remix from MalinaPl beautiful Telecaster model https://www.thingiverse.com/thing:4056363 -- the only difference is it is scaled down to 25% and I have added a Thinline body (with f-hole). The guitar stand is modified and scaled…
EDIT again?: RoughlyModule has added new poses for the bottlecap Boys, so I converted them to American threads as soon as I was aware they were available. Enjoy! EDIT: New cuter models have been added. The new variations have a shorter…
This is a remix of ahen_sons Telecaster body called Plasticaster and the Honeycomb-Stratocaster by Conceptor on thingiverse. I redesigned it from scratch and made a complete new model. All parts are fitted to a Harley Benton TE-20 SB…
This is remix of remix bade cap of this thing https://www.thingiverse.com/thing:5884473 I just want attach water pump directly and it's fits perfectly. Standart print settings 3 outers 10% infill petg
Printed myself a new pickguard to replace the stock white one on my Squier Telecaster. Printed on textures pei sheet. Looks better in person than my crappy photos. Fits tight around the neck. Scanned my stock pickguard and extruded in…
I created the template based on a Telecaster body model by Gustavo Rocha in GrabCad. I used it for a guitar I'm currently building. There are six parts to the template, each part sized to fit on a Prusa Mini+'s build plate. I printed them…
Bottlecap to prevent Sand or Bugs in your drink. Kleiner “Stahlhelm” für Bierflaschen / Glasflaschen mit Kronkorkenverschluß.
Inside the cat is a thimble, a spool for three threads. Several needles/pins are placed inside the spool. The standard thimble also fits. The tail forms a ring, can be used as a keychain if desired 😉 Print-in-Place, no supports ✅ Don't…
Beschreibung Ich habe ein Hybrid Modell erstellt nachdem es bereits den einen oder anderen Dosen- und Flaschenverschluss gab habe ich die beiden kombiniert. Im Anschluss wurde eine Öse zum Anhängen an den Schlüsselanhänger hinzugefügt.…
10, 20, 38, 36, 40, 60, 100 teeth gears
Currently featuring two versions: Volvic 1.5L bottle to hose with 14mm inner diameter Standard glass/PET bottle to hose with 14mm inner diameter The .f3d files allow customizing the design to any threading and any size tubing as required.…
This is a samplecard for your filament. The card has the same format as a credit card except for the thickness(2mm). There is space for a 12mm label sticker on the card. There are also different thicknesses in the lower part of the card…
This is a 3d printable Telecaster style guitar. The original model for this guitar was measured from an actual Telecaster, however I am unable to find the original source where I found the model file, so credit for that model goes to…
Neck pocket insert that fits this great telecaster template by @Bart_1087527 and allows it to be used as a complete router template with a flush trim bit. Also included is a router template for routing out the neck pocket.
A camera mount for the Mintion Beagle Camera that fits into 20x20 Extrusion. Print the stut 2x and the clip 1x. The clip needs supports. Assembly: Print the strut first. Insert the two struts (turn 90°, insert into the slot and twist…
I'm in the process of giving the Prusacaster a shot, but found the plain white pickguard extremely boring for such a unique guitar. So I made it my own, a little bit. Enjoy! I've attached pickguard_description.txt which contains the…
There is only one usable electric guitar in the world and that is the Fender Telecaster. And still that is not yet perfect. It easily loses its switch knob revealing a mean sharp piece of metal that cuts your hand. Your new knob is not…
Update 08.04.2025: small adjustments to some dimensions of the core piece. still compatible to the previous parts. Update 07.02.2025: Reworked the fillet on the bottom side of the print, so there are no supports needed anymoreThis is my…
This is a multi-part design for a somewhat adjustable 5.5mm nozzle camera which can be mounted to the extruder carriage of a Prusa MK3. The STL contains all required parts, including a modified extruder cable holder, an adjustable…
I printed these with 0.4mm Nozzle @2.8 Layer Hight 6 Perimeters 20% infill Printed with Strong Hero Galaxy Black and Supply 3d PLA+ White I printed these 10 degrees Higher than normal 215degrees. PS: Only a small amount of support needed.…
Cuttlephone is a phone case for smart phones. It currently supports phone case mode, Razer Junglecat rails, and Switch Joy-con rails. The case is made with OpenSCAD so it can be customized for new phones. This is a work-in-progress and…
I made a new rig because the other ones were too wide and would risk damaging the wood when polishing with a rotary tool or steel wool. Modelled after a fender strat, fender tele and a squier strat. I suggest printing these in PETG for…
I've been making these Leca plant pot liners for years now and thought they might be useful to other people. This allows you to make custom liners for any pot that fit perfectly! The .stl file is just an example. Use the *.scad file with…
Fender telecaster guitar model. File have to be scaled. 30% of scale gives good efect. Check out my other designs: Ibanez Jem – https://www.thingiverse.com/thing:5026320 Bc Rich Warlock – https://www.thingiverse.com/thing:5103842 Ibanez…
3D printable bridge for electric guitars. Not as good as a metal bridge. Modelled after 3-saddle vintage telecaster bridges. Uses all M3 nuts and bolts. Held down with regular wood screws No pictures because I took this off my guitar a…
Remixed for a Fender Roadworn Tele Bridge. The strings go trough the body and the rivets at the backside are pres fitted. you can use a soldering iron to get it fully secure in it. Also knob plate is flush with the body.
The Fender Telecaster, often referred to simply as the "Tele," is one of the most iconic electric guitar models ever created, renowned for its simplicity, durability, and distinctive twangy sound. It was first introduced by the Fender…
Pickguard Telecaster Style Steampunk pour modèle guitare “Geartare”.
Here is a more ergonomic version of the Prusacaster. The body is completely redesigned except for the middle piece.
Inside the dog is a thimble, a spool for three threads. Several needles/pins are placed inside the spool. The standard thimble also fits. The tail forms a ring, can be used as a keychain if desired 😉 Print-in-Place, no supports ✅ Don't…
This is a Nuka-Cola bottlecap. A very, very big bottlecap… I made two models, one for smaller printers with a diameter of 180mm and one for the big boys with a diameter of 250mm. You can try scaling the model if you need other sizes. Both…
I have created another model for model railway enthusiasts as part of my ongoing efforts to bring model railways to life, this is an easy print and has a lot of stone wall detail. I have many 3d models now completed and continue to add…
I fancied myself a Nuka Cola bottlecap and I was never satisfied with the existing ones online. So I modeled my own! Can be a challenge to print, but I would give it a try! I have included the bottlecap and the logo separately or merged.
This is an Custom Pickguard for my "Squier Paranormal Offset Telecaster". Mine came with an Singlecoil Telecaster Neck pickup and an pickguard for that but the Body is already routed for Humbucker in Neck and seemingly up to Strat…
All parts tot make your Fender Telecaster clock. Only need battery working clock mechanism. Different versions possible. Please take a look at my other models and like them.
puzzlecad is hosted on github. To download the latest version of puzzlecad, please visit the github releases page at: https://github.com/aaron-siegel/puzzlecad/releases UPDATED 4/14/22: Released puzzlecad 2.3. See the Puzzlecad Updates…
¿Muchos cables sueltos? Este cablecanal modular te permite organizarlos fácilmente en tu impresora 3D, escritorio o taller. Se imprime sin soportes, se monta rápido y se puede cortar o extender a gusto. Too many loose cables? This modular…
After overheating a borescope camera by printing too much ABS I have redesigned my previous design to be detachable. This saves me from buying a new camera every couple of months and digging up my allan keys to disassemble the camera…
This was made based on the basic electronics that come on the Squire Affinity series Telecaster. Nicer potentiometers might not fit in this plate. I've added the .f3d and .step files to allow you to modify the plate to fit your…
Update: Now that Slic3rPE supports more print controls here is a project file that loads the settings I used in Slic3rPE version 2.3.0 to make the capsule shell without the top and bottom caps. Mercury Capsule and Escape Tower for the…
Guitar kit parts from TL2 kit at Blackbeard's Den 3x M3 threaded inserts for bridge 3x M3 bolts for bridge ~30mm 10x M4 threaded inserts for body optional 10x M4 bolts ~25mm optional 8x small screws for pickguard (used the ones that came…
A Beaglecam mount for the Ender3v2 which can be mounted at the front. I have to admit that the Beaglecam is not really suitable to be attached to any printer directly in front, the camera angle just does not fit for it especially for…
Sprinklecap Gnome – Sweeten Up Your Prints! Say hello to the Sprinklecap Gnome – a delightful blend of charm and whimsy straight from the candy-coated corners of the fairy forest! Few supports are needed. I used organic-style supports,…
I'm aiming for something lightly fallout inspired
This is a telecaster inspired earring. The earring is printable on both SLA and FDM printers however there is some very fine detail that can only be seen when printed on SLA printers. earring hooks can be bought cheaply on…
A case for the Samsung Galaxy Note 10+ with mounts for the Razer Junglecat controllers. The basic case is taken from https://www.thingiverse.com/thing:3935706/files and the endpiece is modified with the Junglecat mount from…
This is remix of remix bade cap of this thing https://www.printables.com/model/728031-5l-bottlecap-water-pump-adapter I cut the model into two parts so that the base could be adapted to different pumps (the base of my pump turned out to…
Use the openscad file to adjust for your specific guitar. As is, this should fit American Fender Telecasters with a US (imperial) size jack.
I was at a small barbecue party and we had an uninvited visit from wasps. Unfortunately, a wasp had enjoyed the beer bottle of one of the guests without him noticing. The result when he put on the beer bottle was accordingly not so great.…
Printer: Anycubic Kobra Go Orientation: Lay flat, see screenshot Supports: Trees with Support Interface Resolution: .16 Infill: 100% Concentric Filament: Zirro Glow in the Dark Blue PLA I have been searching for a good camera mount for…
This is a telecaster pickup switch selector knob with a raised center for light-touch tactile feel when toggling. Some folks slam these knobs, but if you just want to do quick toggles this raised center helps with that (without having to…
This allows you to mount your guitar to the wall. It prints in two parts without any support. The piece on the left (3rd Picture) gets screwed to the wall - the download includes a template to drill the holes. I use 5mm x 60 mm…
This is a phone case for the Samsung Galaxy Z Fold 3 that accepts Razer Junglecat Controllers. There is also a slot for an S-Pen Pro You can use them in both portrait and landscape. I have made holes so the speakers are not blocked when…
This was a commissioned design by Reddit user GoldenSun3DS You can purchase this to support my work at FrogCase.store The versions with holes in the back are for cooling pads, as requested by the commissioner of the design.
I've always wanted a rose capped pickup knob on my Telecasters. So, I finally made one. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4gH7RAbOEwv Category: Music
Ich habe eine einfache Halterung für die V1 Beaglecam erstellt, um sie am Gehäuse des Snapmaker 2.0 zu fixieren. Es werden nur zwei Schrauben M4x15mm benötigt, die Löcher mit Gewinde M4 sind schon am Gehäuse vorhanden.. Der Lochabstand…
Designed this bottlecap for the volvic 8L bottle after finding out it has threads. DO NOT USE THIS FOR DRINKING WATER The bottlecap doesnt need the tpu gasket, but it does have that 1% leakage without the gasket. just so you know. Print…
Prints flat on the build plate. I recommend 100% infill. I printed mine from PETG-CF but any rigid material should work. Be wary that PLA and PETG can distort, and you will lose tuning quickly. Glass or carbon reinforced materials should…
Created a simple wigglecam, using 3- 35mm single-use-camera lenses, for Sony Fullframe E-Mount cameras (like A7/A9/A1). The files are optimized for some small glass lenses I´ve got at AliExpress, as it`s fairly difficult to source 3 of…
This is a silly idea that came to me because I drink a lot (too much!) soda. I've been looking to combine kitbashing and 3d printing to make some scifi terrain and I realized that the bottle caps had a cool texture on the sides. So by…
This is a phone case for the Samsung Galaxy Z Fold 3 that accepts Razer Junglecat Controllers. You can use them in both portrait and landscape. I have made holes so the speakers are not blocked when using it in landscape. Print Settings…
I usually use leftover bottle caps for when I need to do just a little bit of painting with my acrylics - use them up til they're done and then throw them out. The problem comes when I don't have enough bottlecaps! I made these in…
Version 3.3 small fix: component_cooler_mount is more stable now. !!!! New version 3.2 !!!! Some improvements have been made, the cable ties are gone because they were too unstable and there is a holder for the Nozle Cam. Assembly Video:…
The photos were made by resin printing on the Mars 2, but easily doable on any printer.
Hi, Before I switched over to XOL, I was using nozzlecam in SB and I was more than happy with it, so wanted to keep that feature with XOL, however haven't found ready made mounts. My CAD skills aren't great, but it fits & works. All is…
Decided to give learning Fusion360 a try and adapting the main Xol faceplate for a 3d0 nozzlecam slotted tab. Ribbon cable is routed behind the opposite fan side that the other wiring is hidden behind coming out above the fan to the pcb…
Flaschenverschluss um Insekten aus der Flasche zu halten. Das Original liess sich sehr schwer aufclipsen, daher habe ich die Rastung angepasst. Bottle cap to keep insects out of the bottle. The original was very difficult to clip on, so I…
Inlays and divider for the bottom of the Double Cantilever Box of M.Fanta. You have to release the rods at the bottom shelf and the handle to press the inlay or divider in.
English: This thing has a 100x15mm round ferrit-magnet inside. It's designed to catch bottlecaps falling down when using the wall-mounted bottle opener. It collects the bottlecaps - so it's a bottlecap collecting-point and has to look…
Is he hiding from flexible dragons? or is he unable to hold the immense weight of responsibility that is knowing he should be reusing instead of recycling and trashing? As I'm always trying to do things in the most environmentally…
Just little remix for my fence. I hope my dogs like it. :) ... added also bit larger base to use with 4" poles. Cap is originally designed for 100 mm poles. Category: DIY
Toptube storage box for Cannondale Topstone Carbon. It uses the existing bottlecage style mount (M5 Screws 65mm apart) and follows the toptube shape. It has plenty of clearance to the steering tube that could be used to increase storage…
Es un brazo articulado para Mintion Beaglecam, consiste en un conector que fue diseñado para que este ensamblado directamente con el perfil de aluminio de la Ender 3 V2. Esta pensado para utilizar tornillos M5.…
For my Prusacaster build , I wanted to cut the head stock to make it look cooler than the original paddle head stock. So I designed this template so I could make a fender inspired styled head stock. There are two versions, one that has a…
Different assemblies or combinations possible.
This model is used to position and route the control cavity when mounting a standard Telecaster-style control plate on a guitar body. The holes near the corners reduce pulling tension during the print. This minimizes warping after the…
Designed for bottle caps that are ~33mm in diameter and ~7mm height. Diameter must be over 20mm, otherwise the object may get lodged in the carrying rails. These parts are easy to print, and do not require any supports or post-processing.…
This 3D-printed miniature Telecaster captures the classic design of one of the most iconic electric guitars.
You can use it when you are drilling holes and you want to cool the drill with liquid. Manual cooling.
Prints really well with .6mm nozzle at .36 layer height. Roughly 55 min on my Ender 3.
I bought a beat up broken Squier Bullet Telecaster off ebay and made a new body for it. Obvious inspiration from the Gibson SG. you can mod the STL to fit a BexGears Tele Kit. the two extra middle bridge holes are the correct width for…
This version rendered in puzzlecad (thanks, Aaron Siegel!) provides two benefits. First, the pieces have been split into printable sub-parts that need no support material. Each of the 3 STL files contains all the parts for one puzzle…
After wanting to mount my Vintage Lecarra Steering Wheel from the Pinto in a Shadow Box I found that the wheel was hard to mount along with the Horn Button, so I made this mount that could be easily printed along with a trim ring to allow…
Escudo de equipo de fútbol con tres colores a diferentes capas para imprimir con cambio de filamento. Diseño modificado de: https://www.thingiverse.com/thing:2719610/files
I built my Minicaster from parts on Amazon instead of a kit. Reports have been that the kits have been very inconsistent and for the same price I could pick and choose my own quality parts. I found this post on Reddit that provided a…
Positionsrahmen zum aufkleben auf die Ladeschale. Erleichtert es blinden und anderweitig eingeschränkten Menschen die Ladestation einfacher und sicherer zu benutzen. https://m.media-amazon.com/images/I/61L+nQF9btL._AC_SX679_.jpg…
A soviet/ussr style needlecase/sewing kit with 2-4 spools for thread, a separate storage compartment for needles, and a cap that doubles as a thimble. Yes, i am aware the thimble is a little big. It was made to fit my thumb for sewing…
⚙ COCA-COLA RETRO BOTTLECAP INSPIRED COASTER, STORAGE & WALL ART Add a classic, oversized pop-culture touch to your desk, coffee table, or wall with this 3D-printable Coca-Cola Bottle Cap ! Featuring the iconic logo on both the top and…
I needed a pair of new bottle cages for my bike. I liked strshp's one-fits-all design, but it turned out to be too flimsy for my bottles. Mind - strshp's design fits perfectly for regular 72 mm diameter, 500 ml volume bike bottles. But…
![[revised] BottleCaps v2 - Insect cover for bottles](https://media.printables.com/media/prints/215863/images/1971380_6c21485d-bdac-4b84-8426-25d9f5b8de3b/bottlecaps.png)
![COCA-COLA RETRO BOTTLECAP COASTER, STORAGE & WALL ART [MULTI-COLOUR]](https://media.printables.com/media/prints/80310b2b-d8ce-4804-b218-bab8841248b3/images/13946618_25c2e980-dcba-45bb-8329-5c71221547f7_1c7fe157-48b8-47bc-ae84-89c2cc338a41/1790653985059.jpg)
