Wyniki wyszukiwania: legs

Sortowanie

1483 modeli

P
PrintablesNavierIsStoked

Articulated Axolotl With Articulated Arms and Legs

I have printed the extremely popular articulated lizard many, many times. Its my kids favorite item I have printed for them. https://www.myminifactory.com/object/3d-print-articulated-lizard-98192 My kids also love axolotls so I searched…

Pobrania
16 647
Polubienia
2008
Ocena
4,98
P
PrintablesJopek Design

Sitting pumpkin with articulated legs

Say hello to the articulated sitting pumpkin! Halloween is right around the corner, and there's no better way to celebrate it, than with this cute little fella. It prints in place, and no additional assembly is required. I've included two…

Pobrania
8611
Polubienia
1141
Ocena
4,98
P
Printables3D PRINT

Christmas ornament with articulated legs

Christmas ornament with articulated legs. Print without support and 0% infill! Let the build plate cool down and don't warp the warm build plate to get the part of as the hands can break of the model.

Pobrania
7952
Polubienia
1247
Ocena
4,83
P
PrintablesSabre Design

Planter with legs

Modern planter with legs, available in two sizes with opening of 115 mm and 72 mm for a smaller pot. Legs need to be superglued onder the pot into their dedicated slots. If you want to support me or get commercial licenses you can join a…

Pobrania
6425
Polubienia
2599
Ocena
4,96
P
PrintablesCap'n Corny

Dummy 13 Spider Walker / Mech Legs

Edit 8/28/25: CHECK OUT THE NEW AND IMPROVED VERSION HERE! Edit 12/8: Added a “repaired” version of the leg armor, hopefully this fixes issues some have been having. I kept printing myself more and more armored legs to give them a bulkier…

Pobrania
5753
Polubienia
1574
Ocena
4,83
P
PrintablesTunantero

Multipurpose legs, adjustable in height and angle

Multipurpose legs. They adjust in height and angle. Perfect for adjusting the angle of projectors. (The legs in the photos have been attached with thick double-sided tape.) A slightly curved section is included for easier attachment to…

Pobrania
5148
Polubienia
3262
Ocena
4,87
P
PrintablesGaryMo

Scrub Daddy Holder with Jointed Legs

My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water This is a new design with print in place jointed legs, in the original the legs clipped on…

Pobrania
5072
Polubienia
378
Ocena
4,87
P
Printablesdoggy.prints

Minecraft Steve (articulated head, arms and legs)

My version of Minecraft's character Steve. With articulated head, arms and legs. Easy to print with minimal supports. The model is quite big but can be scaled to any size. I printed one at 50% and a small one at 33% scale. The joints…

Pobrania
3391
Polubienia
295
Ocena
4,73
P
PrintablesInfinaPrint

Christmas tree with Articulated legs

IF YOU ARE GOING TO SELL, PLEASE LET ME KNOW FIRST, SO I CAN KEEP TRACK!! This is a fun one, a Christmas tree with some legs. Print settings: Supports: NO! Brim: not recommended Infill: 15%

Pobrania
3152
Polubienia
390
Ocena
5
P
PrintablesSintratec

Table Legs for a Desk Shelf (Generative Design)

We designed these desk shelf legs generatively in Fusion 360 and produced them with SLS using the Sintratec S3 printer and robust PA12 nylon material. After printing and cleaning, we simply screwed the legs onto a wooden board and voilà:…

Pobrania
2943
Polubienia
1686
Ocena
5
P
PrintablesAudi

Milk Crate with Flexi Legs

This is a remix of @silviutoderita's Milk Crate - No Supports https://www.printables.com/model/732947-milk-crate-no-supports I've uploaded the Flexi Leg as a separate project so you can add Flexi Legs to anything you like: milk crates,…

Pobrania
2655
Polubienia
586
Ocena
4,86
P
PrintablesCap'n Corny

Dummy 13 - Spider/Mech Legs REMASTERED!

THE NEW AND IMPROVED SPIDER LEGS, NOW WITH ADDED POLYGONS! For a long time, I've wanted to redo the old Spider Legs model. It was the second Dummy mod I ever did, and over time I've noticed all of the little errors I made more and more,…

Pobrania
2604
Polubienia
711
Ocena
4,81
P
PrintablesBrady Boots

Hot Wheels 90 Degree Curve - With Legs

Still requires print supports on the part where the hot wheels track clips in.

Pobrania
2476
Polubienia
288
Ocena
4,22
P
Printables3DDIY

Monitor stand Legs

These are legs I created to use with a piece of wood to create a stand for your monitor. You will need 3/4 wood at 8 inches deep to friction fit into the slot. The length is up to you I suggest if you use it longer use more legs to…

Pobrania
2466
Polubienia
840
Ocena
4,94
P
PrintablesJonS

Creeper Clicker and Fidget (Keyboard Switch Based) with Moving Legs

Assembly video: Update: Version 2 Added. Most people with a well-dialed in printer should use this new version. This Minecraft Creeper fidget toy uses a Cherry MX keyboard switch, or similar (I’m using a cheap Outemu Clicky Green switch…

Pobrania
2259
Polubienia
454
Ocena
4,92
P
PrintablesNat

Tika Alpaca (movable legs!)

Everyone loves printing this lovable alpaca by MikaYeap. I added supports to make the leg gaps print a bit nicer and gave the tail a few more parameters to hopefully help it not break and a little disk to help it print. Thanks MikaYeap

Pobrania
2223
Polubienia
321
Ocena
4,82
P
PrintablesSyntaxcuemi3D

Minecraft Steve with articulated arms, legs and head

I recently printed a similar design to this, but it was a single print design. But all of the joints failed when printing, as they were printing in mid air within the model. So i designed this from the ground up. After some post printing,…

Pobrania
2190
Polubienia
152
Ocena
4,75
P
PrintablesJoris Calvat

Halloween Spider Legs

I printed these spider legs in PETG. They pinch a bit tight at first, but you can adjust the fit by slightly bending the plastic to make them more comfortable. I was surprised by the result—it's really fun!

Pobrania
2143
Polubienia
1021
Ocena
4,89
P

EGG HOLDER WITH LEGS (CHICKEN + BUNNY VERSION) / MODERN EGG HOLDER / DECOR / HOMEDECOR

Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ Hello everyone :) Today we want to introduce you to our EGGHOLDER WITH LEGS in 2 Versions . On the one hand there is the…

Pobrania
1996
Polubienia
415
Ocena
5
P
Printablesder-pw
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
1977
Polubienia
628
Ocena
5
P
PrintablesSabre Design

Vase/Planter with legs

Modern Vase/Planter with legs, available in two sizes with opening of 125 mm and 88 mm. Riser/Drip tray can be used to elevate a standard plant pot inside the planter or when using the print as a vase, as a seperator/holder for flower…

Pobrania
1941
Polubienia
869
Ocena
5
P
Printablestkachmikhailo

Legs for fpv drone (10)

If you like my models, please support me on Patreon (link in profile). your financial support will help me continue to help the defenders of Ukraine . thanks for the help everyone.

Pobrania
1894
Polubienia
67
Ocena
5
P
PrintablesZkaza

Cat Water Bowl (Gravity Feed) + Easier Print + Legs

Even more slightly improved Cat Water Bowl, with just added legs for stability. Thanks to mitchell_cj for the original model and minar for improved one. Print instructions Printer brand: Creality Printer: Ender 5 Rafts: No Supports: No…

Pobrania
1675
Polubienia
283
Ocena
5

DJI Mini 3 Pro Front Legs

These landing legs attach to the DJI Mini 3 front arms and add more stability during takeoffs and landings, preventing prop strikes. Mirror the part in whatever slicing software you use to create the leg for the other/opposite arm. When…

Pobrania
1660
Polubienia
229
Ocena
4,8
P
Printablestkachmikhailo

Legs for fpv drone (9cm-12cm-17cm)

If you like my models, please support me on Patreon (link in profile). your financial support will help me continue to help the defenders of Ukraine . thanks for the help everyone.

Pobrania
1307
Polubienia
48
Ocena
5
P
PrintablesPeliX3D

Christmas tree | wobbling legs | print in place

A cute and tiny Christmas tree with wobbly legs. (40mm tall & multi-color -profile available!) The perfect Christmas gift or decoration accessory for your house! Works right off the print plate! (may need some wiggling to loosen the legs…

Pobrania
1282
Polubienia
385
Ocena
4,5
P
PrintablesMeyui

Kumiko Superellipse Bonsai Planter with Legs

With this version, the planter has been upsized to 125mm (4.5") , making it suitable for a wider variety of plants. The form remains true to its design roots, elevated by a base inspired by traditional Japanese stone lanterns . The base…

Pobrania
1206
Polubienia
538
Ocena
5
P
Printablesmarkury

The Rock with Legs (Print in Place)

We all love the Rock, but it is hard to admire his physique when you can really only print his head on various things. Introducing, Dwayne with legs. Just pick him up and you'll get to see those lovely little leggies. Completely print in…

Pobrania
1139
Polubienia
209
Ocena
5
P
Printablesaesthe

Ubiquiti Unifi PRO AP UFO Legs U6 Pro Scale

Just a rescale of the OG model to fit the UP 6 pro mounting bracket holes—they lined up perfectly and secured easy with short M3 screws. + nuts.

Pobrania
1123
Polubienia
156
Ocena
4,25
P
PrintablesGooch

Monitor Riser / Shelf Legs

Some legs for a shelf or monitor riser. I made these so I could use some ikea countertop I had left over as a monitor riser. Some LACK drawers from other creators here would work well underneath. Its only one corner and the model is not…

Pobrania
1064
Polubienia
186
Ocena
4,89
P
PrintablesZS Design

Low Poly Heard with arms and legs ( Articulated )

Low Poly Heard with arms and legs

Pobrania
1032
Polubienia
118
Ocena
5
P
PrintablesJustin Herman

Articulated Axolotl With Articulated Arms and Legs

Articulated Axolotl With Articulated Arms and Legs

Pobrania
1026
Polubienia
117
Ocena
5
P
PrintablesArkam

Trallallero Trallallà 4 Legs Italian Brainrot

Trallallero Trallallà 4 legs version is here. I printed in PLA with tree supports and it costed me 3.6 grams of filament.

Pobrania
1012
Polubienia
63
Ocena
0
P

Ikea Ivar shelf minimalist legs for converting to table-like shelf

Simple legs to convert any Ikea Ivar shelf to the free-standing table/desk/shelf. Use one wood screw (for each leg) that fits and small enough not to puncture the shelf through. My gf used it as a displey riser and workspace organiser. We…

Pobrania
989
Polubienia
654
Ocena
4,83
P
PrintablesMeyui

Kumiko Bonsai Planter with Legs (Rectangle)

Inspired by traditional Japanese design, this planter features an elegant Kumiko pattern, complete with a drip tray, sturdy legs, and a decorative outer shell. The plant's water tray has a small hole, making it easier to check the…

Pobrania
976
Polubienia
458
Ocena
5
P
PrintablesDruk3D.JS

Lego compatible CCBS/HeroFactory/Bionicle Arms and Legs

A selection of Lego CCBS compatible pieces. Attached pictures show examples of Bionicle MOCs build using these 3D printed arms and legs. I recommend to print in PETG (this is what I've tested). UPDATE. After few months the sockets got a…

Pobrania
936
Polubienia
83
Ocena
0
P
PrintablesKuban66

Furniture adjustable legs

Furniture legs (support not needed) with many heights to choose, and two kinds of nuts: smooth cylinder and with hex on top to be used with 36mm wrench (included model to print). Its new version of old model with more height options…

Pobrania
924
Polubienia
147
Ocena
5
P
Printablespiranhaphish

Remixed arms, legs, and accessories for Articulated Bender

This remix adds revamped arms and legs to @JHB's already-awesome Bender model as well as adding new beer bottle and cigar accessories. The arm/leg segments are unified (use 5 for legs, 4 for arms) and use a ball-socket design for full…

Pobrania
924
Polubienia
183
Ocena
4,25
P
PrintablesLearn As You Go

CNC Mini Laser Engraver 2040 V-Slot Y-Plates, X-Plates And Legs

Openbuilds 2040 V-Slot The plates are 8 mm thick and are designed for 2040 v-rail. Y-Plates: One of the plates is designed for a Nema 17 stepper motor and the other accommodates a 16 mm f625zz flanged bearing. X-Plates: The back plate is…

Pobrania
879
Polubienia
188
Ocena
5
P
PrintablesSLIMPRINT

Twisted Planter with Legs, Vase Mode

A Twisted Planter with Legs, 3D printable in 2 parts. The planter is designed to be printed in vase mode and the legs without supports (to save you some time :)). For indoor and outdoor use. I would suggest to connect the parts with some…

Pobrania
843
Polubienia
244
Ocena
5
P
PrintablesKilberisch

Simple Angled Leg Bracket for round legs

This is a simpel modern looking bracket for angled (15°) furniture legs. This model in particular fits 30mm round wood rods. Tho, keep in mind due to filament shrinkage while printing and manufacturing tolerance of your chosen leg…

Pobrania
841
Polubienia
469
Ocena
5
P
PrintablesAlex

Logitech MX Keys Legs/Feet/Extensions

Simple legs I designed and have been using for over a year now

Pobrania
803
Polubienia
81
Ocena
4,92
P
Printablesthall72

Lego Compatible (41879.dat) Minifig Hips and Legs Short without Hole

This model is compatible with the lego system.

Pobrania
801
Polubienia
73
Ocena
5
P
PrintablesPower Jojo

Dummy 13 Mecha v2 legs

Legs for Dummy 13

Pobrania
798
Polubienia
268
Ocena
0
P
PrintablesHeikit

Funny Egg Cup Man with Legs – Cute Breakfast Egg Holder Gift - Eierbechermännchen - Easy to print

This funny egg cup man brings a smile to your breakfast table. Not just at easter. The small character holds your egg while sitting with relaxed legs – perfect for a fun and playful breakfast setup. The design prints easily and does not…

Pobrania
774
Polubienia
98
Ocena
5
P
PrintablesAgustin Arroyo

Creality CR-10 Legs

Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- 3D Printable legs for the Creality CR-10 and…

Pobrania
753
Polubienia
123
Ocena
5
P
PrintablesLong

Better Printed Arcade Button Kailh Choc V1 Low Profile (legs don't break)

Updates 2026-03-29 added a 20.5mm version. This version also has a slightly thinner outer ring (1.0mm vs 1.2mm) 2024-03-17 Added different options for leg thickness. Also realized that most problems with legs fitting are solved with…

Pobrania
741
Polubienia
81
Ocena
4
P
PrintablesMeyui

Kumiko Bonsai Planter with Legs

Inspired by traditional Japanese design, I plan to design a series of Japanese bonsai. This planter consists of three components: the main bonsai vessel featuring a Kumiko pattern, a detachable drip tray, and supporting legs incorporating…

Pobrania
726
Polubienia
324
Ocena
5
P
PrintablesLucaDilo

COBOT: Four servo legs and distance sensor robot

COBOT: Four servo legs and distance sensor robot I present my latest project, COBOT, a robot that can move thanks to 4 servo motors and get the distance to obstacles with the HC-SR04 distance sensor. This is an ongoing project I have made…

Pobrania
722
Polubienia
105
Ocena
5
P
PrintablesKnockedover

Cricut Explore Air 2 legs

I needed a set of legs to raise my Cricut Explore Air 2 high enough to allow my cricut joy to fit underneath so i designed these. they use the original screws that hold the rubber feet in place. I printed them in PLA with 5 walls and 10%…

Pobrania
707
Polubienia
159
Ocena
5
P
PrintablesCraftyPinappl

Dummy13 Digitigrade Legs

I saw the kit-bash digitigrade legs using the K9 mid-leg and I was not happy with the proportions. I remixed the mid-leg frame piece to match the original Dummy13 shin length. For digitigrade legs (walking on “toes”) I used the standard…

Pobrania
704
Polubienia
215
Ocena
5
P
Printablesratatosk

ONN TV Legs (Low Profile)

My parents replaced the TV that fits into their little kitchen nook, but the legs on the new ONN TV were too tall to fit. I quickly designed these low-profile replacement legs and just got confirmation that they fit and work. Once…

Pobrania
703
Polubienia
32
Ocena
5
P
PrintablesJarek1978

Christmas tree with articulated legs - flexi

Due to overhangs, printed using supports.Due to overhangs, printed using supports. Infill 15%. 3 walls, 0.20 mm

Pobrania
693
Polubienia
129
Ocena
5
P
PrintablesBarnyard Hero

Ortur Laser Master 3 Foldable Legs

Foldable legs for the Ortur Laser Master 3. Similar dimensions of the set sold by Ortur for $80. These have the option for reusing the original feet as well. Use a 25mm M5 bolt with M5 hex nut for securing legs to bracket. Use 8mm M4 bolt…

Pobrania
687
Polubienia
80
Ocena
5
P
PrintablesToxicGoblin

articulated gorilla tag with legs.

gorilla tag character with legs

Pobrania
664
Polubienia
36
Ocena
0
P
PrintablesMichaël Fortin

Rummy Stand Legs

Exact replica of the original Rummy stand legs from the old set we have. Very closely matches the size of the original. May be useful to fix your own! Enjoy. Note: In the photos, the brown one is the original and the black one is the…

Pobrania
660
Polubienia
26
Ocena
5
P
PrintablesAudi

Flexi Legs

I wanted to add Flexi Legs to a milk crate. https://www.printables.com/model/862547-milk-crate-with-flexi-legs But I couldn't find a stand-alone Flexi Leg STL. So I created my own. UPDATE 20 May 2024 There seems to be some dispute as to…

Pobrania
651
Polubienia
88
Ocena
5
P
PrintablesKDUBBS
Pobrania
648
Polubienia
93
Ocena
5
P
Printablessalsaia

Chicken Egg with Legs

The chick is trying to break through the egg! But it stopped when it's legs popped out and thought, "this is fine." This is a quick model I made of chicken legs breaking through its shell. I printed the model with supports underneath the…

Pobrania
636
Polubienia
93
Ocena
5
P
Printablesvervurax

Flat Mesh Skirt with Wide Legs for Ender 3 NG

Mod designed for Ender 3 NG You can see the build process in Armor3d Printing 's livestream. Check out his other videos too for more info about the E3NG and more! Printing Parts are already oriented properly for printing. No need for…

Pobrania
601
Polubienia
168
Ocena
4,5
P
PrintablesMTERHAL3K

Modular Chain & Shackle Set (Hands, Legs, Neck)

Modular 3D printable model set, which allows you to create authentic chains and shackles for hands, legs, and neck, perfect for a wide range of cosplay creations. Whether you're embodying a fantasy, sci-fi, or historical character, this…

Pobrania
580
Polubienia
154
Ocena
0
P
PrintablesBdaboy

Prusa Mini Support Legs

After creating ( https://www.prusaprinters.org/prints/40128-prusa-mini-xz-support ) I still found that when printing tall thin parts the Mini would knock them over if moving fast over long distances. I attributed this to the small amount…

Pobrania
574
Polubienia
146
Ocena
5
P
PrintablesVertigoMakes

TCL Roku TV Foldable Stand/Legs

Fold-able legs/stand for TCL TV so that you can fold them in and hang the TV on a wall (I have a wall mount I will share seperately) Category: Replacement Parts

Pobrania
571
Polubienia
46
Ocena
5
P
PrintablesMark Schemeinda

Washers / Unterlegscheiben DIN 125

If u need something, often u don’t have it anymore. As always… Sometimes I only need one little part, for which I don’t want to drive to the store, or want to order it online. for sure they are not as stable/ resistant as metal parts, but…

Pobrania
559
Polubienia
22
Ocena
0
P
PrintablesDavid Spencer

Logitech K120 Keyboard Feet/Legs

This is a model for replacement Logitech K120 Keyboard's feet/legs. Best printed flat-side down.

Pobrania
550
Polubienia
25
Ocena
5

DJI MAVIC PRO Extension legs

Extension legs are useful when landing on grass. Print instructions Use supports ;)

Pobrania
544
Polubienia
56
Ocena
4,8
P
PrintablesAndreagattonero

Raiser legs for Cricut Maker/Maker3

Yes you can find dedicated furniture for your CriCut machine, but we have a 3d printer for many reasons including the “I'll do it myself”. So here it is, a simple idea to raise your Maker (or Maker3) from the table and have room to store…

Pobrania
535
Polubienia
157
Ocena
5
P
PrintablesAmber Paige

Acoustic Legs for PrusaCaster Guitar Stand

I loved the design of the prusacaster inspired guitar stand but needed it to fit my acoustic guitar - so I altered the legs from https://www.printables.com/model/372718-guitar-stand-sizes-for-electric-or-acoustic to fit with the…

Pobrania
533
Polubienia
55
Ocena
4,33
P
PrintablesHervea

Milk crate with articulated flexi legs

Milk crate with flexi legs

Pobrania
522
Polubienia
74
Ocena
4,67
P
PrintablesFlorin Balazs

Creality K1 adjustable feet/ legs

You can download 2 versions, one with an additional thread tolerance of 0.1 and one with 0.2 mm. I printed both versions, in PLA, with a layer of 0.1 height. I decided to keep the 0.1 without any mechanical adjustments. The 0.2 tolerance…

Pobrania
521
Polubienia
84
Ocena
4,86
P
PrintablesKeilTheOld

Mechanical Dancing Articulated Crab "Crazy Legs"

Edit: revised “ring Lock” clearance “Crazy Legs” The Dancing Mechanical Crab This is an articulated Crab that Dances (Moves it's Legs) when you move the lever in the back left and right. This model was harder than my last “mechanical”…

Pobrania
520
Polubienia
190
Ocena
5
P
PrintablesHervea

Passthrough rabbit easter egg bunny with flexi articulated legs

Passthrough rabbit easter egg bunny with articulated legs. Prints better at 0.16 layer height. If you download it, please like.

Pobrania
503
Polubienia
77
Ocena
5
P
PrintablesHP Robots Otto

Otto DIY alternative robot biped legs

The idea was to have a set of legs and feet that were easier to assemble and have lower center of gravity for certain balance movements like lifting one foot while standing on the other. To complete the robot you will need to download and…

Pobrania
493
Polubienia
49
Ocena
4,75
P
Printablesthall72

Lego Compatible (42687.dat) Minifig Legs SW Super Battle Droid

This model is compatible with the lego system.

Pobrania
488
Polubienia
61
Ocena
5
P
PrintablesHedo3D

Shaun the sheep - new legs

new head version: https://www.printables.com/de/model/52196-shaun-the-sheep-v2-new-face-toilet-roll-easy-print Ich habe die Beine neu konstruiert um deutlich weniger Material und Druckzeit zu benötigen. Der Kopf stammt aus dem…

Pobrania
482
Polubienia
100
Ocena
4,67
P

Articulated ( AK ) Rifle Bullet With Legs - Office Decor

Introducing the Rifle Bullet Buddy! Great to put on your shelf or in your garage. With its little articulated legs, it is sure to make your collection shine.

Pobrania
462
Polubienia
62
Ocena
0
P
PrintablesNodashi

Diesel Heater Legs

Simple model to elevate the diesel heater so the exhaust pipe does not come in contact with anything. This is for the tall and slim all in one models. I used 4 M5 screws that thread into the plastic foot. But if you have a screw long…

Pobrania
457
Polubienia
63
Ocena
5
P
PrintablesBrett Marshall

Present with Articulated legs

created a basic box with bow and added articulated legs. printed on 2 plates to reduce filament changes just clips together once printed. done on my bambu A1 mini print time around 1.5 hours

Pobrania
456
Polubienia
67
Ocena
2,5
P
PrintablesSEREV3d

Hollow Knight- Hornet -Shelf Buddy-Flexi legs-FREE Hollow Knight Mini Character

Little Hornet with dangling legs that can sit on the tower, your desk, or bookshelf. It has a loop on their back to carry swords — or even to use as keychains/bag charms! Added V1.1 update, with slightly thicker flexi leg connections!…

Pobrania
452
Polubienia
64
Ocena
5
P
PrintablesBugman_140

Googie - Easter Egg with Legs

Inspired by watching Rise of the Guardians with my kids, Here is my model for a Googie....Easter Egg with Legs as seen in the Easter Bunnies Warren. If you want a Nice Egg Size scale it down to 45%, though i have left the file bigger too…

Pobrania
452
Polubienia
74
Ocena
5
P
PrintablesImpresoen3d

Christmas tree keychain with legs

Christmas tree keychain with legs

Pobrania
448
Polubienia
32
Ocena
5
P
PrintablesShoyu

Monitor Riser Legs / Shelf Riser

I picked up some of these IKEA GrimsLov Drawer Fronts from my local IKEA. They were SUPER cheap presumably from someone ordering too many or not liking them, no idea. The IKEA Grimslov Drawer Front profile dimensions are roughly 124.6mm…

Pobrania
447
Polubienia
134
Ocena
0
P
PrintablesJustAnother1

Unterlegscheibe (Washer)

Alle Abmessungen können am Anfang des *.scad Datei eingestellt werden. all settings are variables at the start of the script.

Pobrania
446
Polubienia
11
Ocena
5
P
PrintablesNikosSprocket

ERCF Frame Legs for Voron 2.4 300mm (version 2)

My Voron 2.4r2, 300mm, is fully paneled with Plexiglass. I designed these feet to be used with 450mm 2020 extrusions for the ERCF MMU and still be able to utilize panel clips, and be able to remove the plexiglass panels for printing PLA…

Pobrania
436
Polubienia
77
Ocena
5
P
PrintablesClonephaze

Articulating 3D-Printable Legs

A simple but thought-out design for an articulated leg meant for my own future models, but also shared for the 3D printing community to use and remix. Can be scaled from 50% to 200% with no issues. If your printer’s tuned, I’m sure you…

Pobrania
432
Polubienia
23
Ocena
0
P
PrintablesBillybobTudson

Flexi Anything Kit – Arms & Articulating Legs

Description Bring your prints to life with the Flexi Anything Kit ! This versatile add-on lets you easily attach flexible legs and stationary arms to any model, adding personality and charm. Designed for strength and durability, the legs…

Pobrania
429
Polubienia
32
Ocena
3,5
P
Printablestwothingies

Monitor Stand legs (IKEA hack)

Use these 3D-printed supports to make a monitor stand for under $20. Here's how: Non-printed parts IKEA BERGSHULT shelf . There are different sizes, but the one we used is 80 cm x 20 cm and 20 mm thick. We've included the F3D file so you…

Pobrania
408
Polubienia
88
Ocena
5
P
Printablesiapetus3D

Horse Statue on hind legs v2 (re-upload)

Horse Statue on hind legs Ai v2 (re-upload) (scale it) i didnt test it on printer.(the old one have some error)

Pobrania
406
Polubienia
42
Ocena
3
P
Printablescranialvault

Hisense Roku 32" TV Legs

Print on the side with a brim. The legs have a tendency to warp unless you're printing in an enclosure. The original model was modified to fit a smaller TV. There is a second file with tapered holes to accept a larger screw head.

Pobrania
406
Polubienia
15
Ocena
0
P
Printablesthall72

Lego Compatible (30376.dat) Minifig Mechanical Legs

This model is compatible with the lego system.

Pobrania
403
Polubienia
67
Ocena
0
P
PrintablesMartin

Monitor stand legs

I was inspired by some monitor stand leg models. I modeled this model for the board I wanted to use. The hole for the board is 18mm x 200m.

Pobrania
402
Polubienia
90
Ocena
5
P
PrintablesDiona

WDhex baseplates + legs

These are the baseplates for the hexagonal dungeon tiles we created. You can use the clips and legs to raise the baseplate if you want to take it to a higher level. These baseplates go together with the tiles we made. Our tiles are made…

Pobrania
399
Polubienia
80
Ocena
5
P
PrintablesWojciech Kawa

Legs for beer crate

I designed the beer crate legs to be stackable. My design fits AA, AAA and empty battery crate. To put on, first set the ends of the legs in place and then forcefully push in the center, but with sensitivity so as not to break the crate…

Pobrania
397
Polubienia
81
Ocena
4,92
P
PrintablesToolsToMars

Riser Legs

4" and 6" version. rubber feet screw on and came from Home Depot.

Pobrania
395
Polubienia
293
Ocena
4,67
P
PrintablesMobilemedic

Xtool legs and honey comb holder

I combined two models to create this design, incorporating features like feet and bolt-in-place for added stability. I specifically wanted my honeycomb centered and secure, so I added a bracket that can be bolted onto baseboards. The…

Pobrania
393
Polubienia
60
Ocena
0
P
Printables3DDIY

Modern Flower Pot with Wood Dowel Legs

This is a flower put I designed that uses wood dowels as legs. This is my version of a mid century modern plant stand. But with the legs integrated into the flower pot. You can watch the build video at the link below. Legs are 1 1/8 inch…

Pobrania
381
Polubienia
198
Ocena
5
P
PrintablesTol

Tweety thicker legs

I seem to have not very good orange PETG filament and when I tried to attach the legs to the body, the thin legs always used to break. I printed many legs on Ender3V2 and broke them all. Finally I've contacted reddadsteve and he suggested…

Pobrania
369
Polubienia
42
Ocena
4,8
P
PrintablesAustin Hansen

Articulated Heart Figure with Legs and Arms

This fun heart figure character features articulated arms and legs that prop the heart upright in a seated pose. Designed with a playful, cartoon-style look, it makes a great desk companion, gift, or display piece. The articulated limbs…

Pobrania
366
Polubienia
30
Ocena
5
P
PrintablesMikolas Zuza

Legs for the Prusa Enclosure

Legs for the Original Prusa Enclosure - elevates the enclosure up a bit, allows robotic vacuums to clean under it, and I just like the way it looks. :) Cable slot I've uploaded both version with a cable slot and without it. If you use any…

Pobrania
366
Polubienia
285
Ocena
4,94