Wyniki wyszukiwania: lid

Sortowanie

19 997 modeli

P
Printablesrobotfriend

Ultralight 2gram Glider (print in place)

If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…

Pobrania
52 246
Polubienia
8823
Ocena
4,59
P
PrintablesJohn Doe

Simple Indoor Glider V2

This was printed on the Bambu P1P and printed in 23 minutes(17 minutes of actual printing) with white PLA basic. It used just under 10 grams of filament. Check out the Makerworld profile…

Pobrania
27 282
Polubienia
5133
Ocena
4,78
P
Printableszcassell

Print in Place Sliding Number Puzzle

UPDATED: see the new and improved print here: https://www.prusaprinters.org/prints/103948-sliding-number-puzzles-print-in-place-15-puzzle These are my 3d printed version of the classic sliding 15 puzzle. I've also included a 3x3 8 piece…

Pobrania
10 991
Polubienia
1165
Ocena
4,82
P
Printablessquinn

Fruit Fly Trap Mason Jar Lid

A helpful lid that you can screw onto a standard mason jar to create the perfect fruit fly trap. Put a bit of liquid bait inside (just about 5 mm deep), and place where it's needed. There are many commercial fruit fly liquid baits…

Pobrania
10 454
Polubienia
2010
Ocena
4,9
P
PrintablesPrusa Research

Hinged lid for adding MMU2S to Original Prusa Enclosure

Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…

Pobrania
10 227
Polubienia
1063
Ocena
4,8
P
Printableskev

IKEA 365+ Lid Holder / Deckelhalter - 10 Slots

Remix of version V2.1 by Simon with 10 instead of 5 slots. Fits square lids with a length of 15 cm or rectangular lids with a length of 21 cm (upright) Printed using PETG | 30% infill | no supports required

Pobrania
9068
Polubienia
3316
Ocena
4,97
P
Printableszcassell

Sliding Number Puzzles - (print in place 15 puzzle)

This is my 3D-printed version of the classic sliding 15 puzzle. I also included a smaller 3x3 8-piece puzzle along with a larger 5x5 24-piece puzzle. These are fully print in place, so the pieces all interlock straight off the printer.…

Pobrania
6779
Polubienia
803
Ocena
4,86
P
PrintablesART TOO

SLIDE LOCK - DOOR BOLT (Tested)

Easy To Handle Slide Lock Scalable in slicer

Pobrania
4360
Polubienia
2243
Ocena
4,9
P

Rounded Bottom Box with Lid

Box with a rounded bottom, for easier grip on small things, such as nuts or beads. Lid with a simple locking mechanism. Includes stand 3x3 and 3x4. Double size here.

Pobrania
4172
Polubienia
814
Ocena
4,95
P
PrintablesLanzDesign

VasePlane - Vase Mode Glider

V2: Version 2 is now available! The pinch grip has been removed and replaced with a hook to launch the glider with a rubber band. A rubber band holder/handle is also included. (Gif of V2 flying has been added at the bottom of this post!)…

Pobrania
3849
Polubienia
436
Ocena
4,89
P
PrintablesmoWerk

Barrel Gate Bolt | Sliding Latch Lock | Multiple Sizes

Smoothly operating and very sturdy sliding barrel bolt lock thanks to the great original design by Jerry Lee With added “locked open” position and full FDM print optimized handle with threads, removing the need for glue. Update: per user…

Pobrania
3721
Polubienia
1788
Ocena
4,86
P
PrintablesJoeRixon

Stable glider V7a + Notch for rubber band launch (50m+ range)

This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…

Pobrania
3317
Polubienia
365
Ocena
4,94
P
PrintablesSheepMe!

Stackable Baskets Organizer System with Lids (Circle Edition)

I created the stackable version of my Organizer/Basket for Drawer at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High Profile 204.0 124.5 117.5 Standard Profile 60.0 Low Profile…

Pobrania
3166
Polubienia
1500
Ocena
4,8
P
PrintablesCisco3D

Slide Flute, A Toy Instrument

Not sure if strikes the right tone, but for sure it is loud. This 3D Printed slide whistle will bring some fun. A quick two hour print (it don't needs support but some sanding may be required Inspired by the this Prusa Blog Print a…

Pobrania
2784
Polubienia
412
Ocena
4,65
P
PrintablesLanzDesign

VasePlane V2 - Vase Mode Glider with Rubber Band Launch System

This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…

Pobrania
2410
Polubienia
336
Ocena
4,86
P
PrintablesJiří Vaško

Thule Urban Glide 2 - Leg holder

Leg holder for Thule Urban Glide 2. Print without supports. You can cut model to smaller height.

Pobrania
2292
Polubienia
103
Ocena
5
P
PrintablesNotatiation

Print-in-Place Slider Fidget (13 minute print)

A Small Print in Place Slider Fidget, which takes only 13 Minutes to print. If it doesent work right off the Plate, put some force into sliding it and it should come loose. No AI was used in the making of this model.

Pobrania
2270
Polubienia
124
Ocena
4,2
P
Printablesc-arts-modelle

Lukisegler (electric RC glider)

CArts Lukisegler !! Attention !! There is an updated version of the fuselage of the Lukisegler: https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider CArts Lukisegler (english) Span: approx. 1700 mm Body length:…

Pobrania
2270
Polubienia
258
Ocena
5
P
PrintablesART TOO

CAN COVER - CAN CLOSURE - CAN LID - (Tested)

Perfect to save your dring from saw dust or insects Can also be used to preserve your drinks

Pobrania
2071
Polubienia
351
Ocena
5
P
PrintablesMateo Van Damme

Rasberry Pi 4 Model B Case with snap fit mesh lid

This case has 4 versions: Plain : No cutouts and no mesh Plain cutouts : This version also has no mesh but it has slits for GPIO and camera cables Mesh standard : A mesh is added in PrusaSlicer to the 3MF files. This only works when you…

Pobrania
1765
Polubienia
112
Ocena
4,43
P
PrintablesExtrutim

Storage Box Snap-Fit Lid

Before you read on, click here to check out my new parametric customizable version of this box! I made a small box to storage all this little Screws. Rounded corners inside to get them out easily. The "LidThight.stl" file is very thight,…

Pobrania
1759
Polubienia
276
Ocena
4,87
P
PrintablesCelta

Kitchen Utensil and Lid Rest

This enhanced kitchen utensil and lid rest is a complete redesign of an existing concept, optimizing functionality and printability. Designed to keep your countertops clean and organized, it features a smaller side with a raised border…

Pobrania
1433
Polubienia
501
Ocena
5
P
PrintablesDarius V

Modular Sliding Shoe Size Ruler (EU/US)

This 3D printable shoe sizer features a two-part sliding design that measures foot length in both EU (left) and US (right) sizing systems. The base unit covers up to EU size 27. For larger feet up to EU size 46, simply print the optional…

Pobrania
1402
Polubienia
758
Ocena
5
P
PrintablesDrFeelgood

Interlockable Sorting Cups (now with Lids)

[ Update 2: I redesigned the cups to make them stackable. You can find version 2 here . Version 1 will stay online in case anybody wants to keep using them.] [ Update 1: Added a snap lid and cups in two more sizes. See below for details.]…

Pobrania
1363
Polubienia
373
Ocena
4,93
P
Printablesmakermac

Westone IEM Case with Flush lid / Headphone case

UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…

Pobrania
1339
Polubienia
145
Ocena
4,83
P
PrintablesJellyTitan

Mason Jar lid thread source files

Threads for a standard mason jar lid, built in Fusion 360, fully parametrized, for use in other designs. I couldn't find a fusion360 source file to use in other designs, so i built this to share. It's largely based on the thread pitch in…

Pobrania
1240
Polubienia
124
Ocena
5
P
PrintablesIan Foulds

Mason Jar Bird Feeder Lid

This is a screw on lid that turns your standard mouth mason Jars in into a bird feeder. The hanger was made with bailer twine that happened to match my filament color. Forgive the macramé job, I was winging it. Updated: I would suggest…

Pobrania
1182
Polubienia
680
Ocena
5
P
PrintablesM

Bar Keepers Friend Lid

A lid to keep your bar keepers friend in its container. Print it top side down, no supports. It's not quite a press fit because popping it off with force gets the stuff in the air and you probably wouldn't enjoy inhaling it. Knurls to be…

Pobrania
1177
Polubienia
164
Ocena
4,67
P
PrintablesZenlayne

Tiny soap glider

Hey ! This is a fun project I really wanted to share with you because I had lots of fun with it ! The concept As you can see, the concept is simple, it is juste a tiny 3d printed glider with the wings made out of "soap bubble liquid"!…

Pobrania
1097
Polubienia
337
Ocena
4,55
P
PrintablesLocki

Past na octomilky na velký závit - Lid fruit fly Trap for glass with thread

Inspiroval jsem se u MatsErik Soda Bottle Trap , ale vymodeloval od nuly. Díky za inspiraci :) Vyrobeno ve Fusion 360. Nejlépe vytisknout žlutou, troška vína je asi nejlepší, nebo dejte do sklenice nějaké ovoce (banán a trošku octa pokud…

Pobrania
1028
Polubienia
89
Ocena
4,97
P
PrintablesSheepMe!

Stackable Baskets Organizer System with Lids (Hexagon Edition)

I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…

Pobrania
1014
Polubienia
521
Ocena
5
P
PrintablesFormFitPrint

Diaper Genie Complete Replacement Lid - For Older Models

One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…

Pobrania
969
Polubienia
31
Ocena
5
P
PrintablesMetikumi

Solid and Compact F-Clamp Holder for Long and Heavy Clamps

I designed this f-clamp holder to store my clamps in the most compact way on the wall. The holder is intentional massive and bulky to withstand the weight and forces that are put on the object. For regular and small clamps, have a look at…

Pobrania
883
Polubienia
168
Ocena
5
P
Printablesnem

Small compact sliding desiccant box

A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)

Pobrania
714
Polubienia
213
Ocena
5
P
Printablesastrophage

Anatomical Heart (Solid Body)

The .3mf file has custom orientation & painted supports for the better quality printing.

Pobrania
710
Polubienia
50
Ocena
5
P
Printablesflok

Alexander Schleicher Ka8-b Glider

This is a detailed scale-model of the popular Ka8 Glider! Facts: Wingspan: 35cm Length: 16cm Height: ca. 5cm Update 06.03.2023 : Reworked geometry at the wings! Especially the thin areas around the trailing edge and the aileron create a…

Pobrania
704
Polubienia
53
Ocena
5
P
PrintablesMLS

Zipper Slider Replacement / Reißverschluss Ersatzschieber

Hier habe ich 2 Varianten für Plastik-Spiralreißverschlüsse konstruiert; zum Einen die Variante PC5 für 6mm sowie die Variante PC7 für 7mm breite Reißverschlüsse. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt…

Pobrania
701
Polubienia
75
Ocena
4
P
PrintablesFormNFlourish

Pumpkins candle holders for tea light with Lid and Stacking Rim

Fun Jack o' Lantern Tea Light! Various faces, each with a rim on the bottom for easy stacking. Print the lids you want for the top pumpkins. Refer to the original for tips on infills and face reference numbers. Like the design? Buy me a…

Pobrania
687
Polubienia
215
Ocena
4,8
P
PrintablesBUSH_123

Mini glide bait v2 (fully 3d printed)

check out the new version link -100 percent infill -glue tail on to body

Pobrania
667
Polubienia
46
Ocena
4
P
Printablesc-arts-modelle

Lukisegler 2.0 (electrical RC glider)

Lukisegler 2.0 an RC electric glider with brushless drive Attention! Since this is a large project with many files, I will add more instructions here in the near future! Instructions for the fuselage are included in PDF format. The first…

Pobrania
658
Polubienia
114
Ocena
5
P
PrintablesMichaelQ

Original Prusa Enclosure - Slider Lock Latch

When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…

Pobrania
656
Polubienia
228
Ocena
4,98
P
PrintablesM4NU

The Magical Sliding Box - Print in place

Push the top of the box and the inside hidden box will instantly appear under the first one ! The inside lid makes sure that nothing will escape the box and the gliding system and the locks are strong and fun to play with. Inside…

Pobrania
654
Polubienia
183
Ocena
4,8
P
PrintablesDieHard

Airbus A320 slingshot glider (Only need 1 elastic band!)

Hello! This Glider has been based off one the worlds most sold aircraft since 1986, the Airbus A320 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane…

Pobrania
653
Polubienia
129
Ocena
3
P
Printablesfifindr

Slide-to-Drop Powder Scoop for Bottles

A slide-to-drop scoop designed for easy and mess-free transfer of powders into bottles, shakers, thermoses, or containers. The scoop features a sliding bottom: simply collect the powder, place the scoop onto the bottle opening, and slide…

Pobrania
630
Polubienia
179
Ocena
4
P
PrintablesAdam

Tri-Glide Webbing Slide (Threaded and No-Thread)

This is a simple tri-glide webbing slide for 1" webbing. There is a threaded and no-thread version. Update: versions are also available for 30mm, 1.5", 50mm. Design parameters: The webbing slots are sized for 1" webbing (actual width is…

Pobrania
625
Polubienia
56
Ocena
5
P
PrintablesTBII78

Pringles Chip Slider Tray Sealable

Large Pringle tray sealable, with flat edge for tray dispensing position and anti rolling. Printed on food safe PLA at 0.20 layer height no infill

Pobrania
579
Polubienia
27
Ocena
5
P
Printablesfeni

Ikea 365 Lid Holder - Kitchen organizer

I really liked Simon's remix of the IKEA 365 lid holder, but I prefer to use a 6mm nozzle and PETG which is less brittle than PLA. Also, PLA is so hard it may scratch cupboards. So provided 3mf and gcode for convenience. Prints in 7 hours…

Pobrania
556
Polubienia
157
Ocena
5
P
PrintablesViermalbe

Bottle opener & lid combination in 9 different languages

I combined the opener part of the PRUSA BOTTLE OPENER and the lid part of dede67's Beer Bottle Lid into a cool new bottle opener that can be used to open and close bottles with crown caps to protect it from stuff like dirt, wasps or flys…

Pobrania
506
Polubienia
50
Ocena
5
P
PrintablesJanek

Cream Container 10ml with Screw Lid

A compact and minimalist 10ml container designed primarily for creams, balms, and other cosmetic products. The screw lid ensures secure closing, while the knurled edge makes it easy to open even with slippery hands. Perfect for travel,…

Pobrania
481
Polubienia
113
Ocena
4

Jar with lid (without name) / Dose mit Deckel (ohne Namen)

Here you can find find a small jar with a threaded lid. You can print it directly without any support! At the end of the thread you can see a kink. This kink is to fix the lid when you close it, with a little force. Just try this print…

Pobrania
462
Polubienia
27
Ocena
4,8

Human skull / lidská lebka

Human skull model created by direct conversion from CT scans. A world famous doctor (and our good friend) actively working in the field of surgery provided us with her skull for study purposes. The model is created by conversion from CT…

Pobrania
458
Polubienia
242
Ocena
0
P
PrintablesBooks

Organic Jam Jar & Lid

A model of a jar of " Kirkland Organic Strawberry Spread " with its lid. This model is intended as a starting point for upcycling projects. The FreeCAD file contains a spreadsheet with most of the measurements in the sketches are…

Pobrania
447
Polubienia
36
Ocena
4,67
P
Printablesfifindr

Slide-to-Drop Protein Powder Scoop

A smart no-spill powder scoop designed for protein shakes, joint supplements, fizzy powders, or anything you mix in a glass or shaker. 🔄 The sliding bottom lets you drop the entire dose straight into the container 🥤 No more powder spilled…

Pobrania
438
Polubienia
73
Ocena
5

Lotus Piston Flute (aka Slide Flute)

My contest entry for music instruments. Fully printable, No other hardware or gimmicks. With practice you can master the Lotus and play music. Without the Slide you can have a two tone “coo-coo clock“ bird sound by opening and covering…

Pobrania
434
Polubienia
59
Ocena
4
P
Printablesfuzzms

Replacement lid for Moccamaster coffee maker

This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…

Pobrania
432
Polubienia
26
Ocena
4
P
PrintablesMLS

Zipper Slider Replacement for Wellensteyn and other #8 two-way-Zippers - Reißverschluss Ersatzschieber für Wellensteyn und andere 2-Wege Reißverschlüsse 8mm

Die Original Slider des Reißverschlusses meiner Wellensteyn-Weste sind gebrochen; somit konstruierte ich in FreeCad neue Slider. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten…

Pobrania
396
Polubienia
40
Ocena
4,67
P
PrintablesPeter Farell

Santa Skulls Holiday Bulb Ornament.

Santa Skulls Tree Ornament. Designed with stable diffusion and blender.

Pobrania
393
Polubienia
141
Ocena
5
P
PrintablesDanAndersen

Allit Basic 33 / Allit VarioPlus Hobby 33 drawer insert ( Aldi Workzone, Lidl Parkside) Kleinteilemagazin Schublade

The small parts organizer “Basic33” / VarioPlus Hobby 33 (old version with flat frontface) by Allit is often sold via supermarkets like Lidl as a Parkside product and Aldi and Hofer (Austria) as a Workzone product. They come with a very…

Pobrania
388
Polubienia
70
Ocena
5
P
PrintablesMarin

Moccamaster Coffee Filter Lid

Version : 1.2. The connection holes on both parts are now increased from DIA 1.8 mm to 1.95 mm. It is reported several times as the holes were too tight. Version : 1.1. The connection holes on both parts are now hidden, when the lid is…

Pobrania
385
Polubienia
34
Ocena
4,6
P
Printablestur_bo_des_ign

Opel Corsa D - Lüftungsdüse Schieber Adapter - Air Vent Slider Adapter - Fan Grill Slider Adapter

Opel Corsa D - Lüftungsdüse Schieber Adapter - Air Vent Slider Adapter - Fan Grill Slider Adapter

Pobrania
375
Polubienia
16
Ocena
5
P
PrintablesART TOO

CAN COVER 2.0 - CAN CLOSURE - CAN LID - (Tested)

Perfect to save your dring from saw dust or insects Can also be used to preserve your drinks Now with a straw insert

Pobrania
365
Polubienia
126
Ocena
5
P
PrintablesMetikumi

Sturdy Box with Lid and Thick Walls for Transparent Filament

This is my design of a box with a lid with intentionally thick walls to be printed with transparent or translucent filament. The walls are 4mm thick, which makes the box very robust, but more importantly, it will look great if you print…

Pobrania
364
Polubienia
53
Ocena
4,67
P
Printablesredd

Pentagon box with hinged lid

No supports, print in place and easy to print I tried to make it simple and useful. The upper side has a steep angle but it prints well event with 0.3 layer height. Please enjoy and share your comments Print instructions no supports print…

Pobrania
360
Polubienia
83
Ocena
5
P
Printablesdirrgang

Beyerdynamic Slider Repair Kit

Slider repair kit Fits: DT 790 / DT 797 DT 770 / DT 770 PRO / DT 770 PRO HT DT 880 / DT 880 PRO / DT 880 PRO HT DT 990 / DT 990 PRO HS 200 Dyn / HS 200 Rotor / HS 200 Trend HS 400 MMX 300 UPDATE - 30.10.2022: Some slight fine-tuning.…

Pobrania
353
Polubienia
18
Ocena
5
P
PrintablesKibbieKatt

MattHub Case Mount with Lid for Bigscreen Beyond Audio Strap

This is a remake of the MattHub mount for the Bigscreen Beyond audio strap. The mount backplate is nearly identical to the one bundled with the hub, but my remake features 1.85mm holes instead of 2mm for a stronger fit with undersized…

Pobrania
348
Polubienia
12
Ocena
0
P
Printablessteffanders

IKEA Samla 11 + 22 l lid Clip

I found the original https://www.prusaprinters.org/de/prints/14568-ikea-samla-22l-lid-fastener very helpful but printed it with support, because of the horizontal grip starting in the air. So the mod has two different grips you can print…

Pobrania
346
Polubienia
45
Ocena
3,88
P
PrintablesOndřej Lakota
Pobrania
334
Polubienia
68
Ocena
4,71
P
Printablespressi

Razor blade precision sliding knife

Minimalistic design suitable for precision workshop projects.

Pobrania
327
Polubienia
35
Ocena
5
P
PrintablesT. Jansen

Print in Place Glider

Print Instructions Supports or ballast are not required. It is beneficial to have the perfect first layer function of the Prusa MK3.9(S), MK4(S), Core One, or XL. The following settings in PrusaSlicer are recommended: Printer Hardware…

Pobrania
325
Polubienia
14
Ocena
4
P
Printablesluisriverag

Mini Pocket Slide Box (9cm | 12cm | 15cm) - H1.5cm-H3cm

Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.

Pobrania
308
Polubienia
22
Ocena
5
P
PrintablesINeedOneDesigns

Water Bottle Screw Lid / Cap (Easy Print no Supports)

A replacement water bottle screw cap / lid for standard metal drinking bottles and flasks. I designed this to print in two parts so it is easy to print with no supports and get a good finish. Print both parts and the screw part will screw…

Pobrania
306
Polubienia
49
Ocena
5
P
PrintablesScott Gibb

Sliding Door Lock Mechanism

Sliding Door Lock Mechanism This is a simple 3D printable locking mechanism that I used for my printer enclosure. It consists of 4 3D printable parts. It is advised to glue the slider handle to the slider to prevent it from coming loose…

Pobrania
300
Polubienia
51
Ocena
5
P
PrintablesExtra Fox

Cat Food Can Lid

Super simple lid for the 3 oz can of Blue Buffalo “Tastefuls” cat food. Designed with some degree of preventing air ingress by way of an inner lip. I don't know if this will fit all 3 oz cans, just that it will fit the specific brand of…

Pobrania
298
Polubienia
45
Ocena
5
P
PrintablesAndreas G

V2: Slide-On Notebook Webcam Cover - in various dimensions

Slide-On Notebook Webcam Cover - in various dimensions Measure the width and height and download the best fitting model. If you need other dimensions feel free to leave a comment. 07-07-2022 Added V2: thinner walls and smaller dimensions

Pobrania
297
Polubienia
106
Ocena
5
P
Printablesvpicone

Starbond CA Adhesive Applicator Lid

It's not pretty, but hopefully it can help someone else out in a pinch. I've also included the Fusion360 file. Instructions : 0.2mm PLA Add some support underneath the lid. See starbond-ca-nozzle.3mf , it might be overkill but gets the…

Pobrania
281
Polubienia
24
Ocena
5
P
PrintablesRobert

Immunohistochemistry Staining Chamber for Medical Research (8 Slide Holder)

--UPDATE-- I realized in my initial upload I only included the latest version of the lid, which has dividers between the samples holders. I have now included the original flat lid that has no dividers in case this is useful for you. This…

Pobrania
280
Polubienia
26
Ocena
5
P
Printablespurechaos

Nintendo Joycon Storage for Transport with Case Lid

Visible on the photos, the wrist wrap does get in the way to fully close. This fixes this. Sadly made no new pictures.

Pobrania
270
Polubienia
36
Ocena
3,33
P
PrintablesSpool Designs

Dodecahedron Display (Solid or Vase Mode)

Dodecahedron Display (Solid or Vase Mode) Printing Instructions Vase Mode: .3mm layer height Solid Mode: Recommended: .3mm layer height and lightning infill.

Pobrania
264
Polubienia
17
Ocena
5
P
PrintablesFilgy

JSN-SR04T ultrasonic sensor lid mount for IBC water tank

This mount is used for mounting JSN-SR04T water level ultrasonic sensor on top of the IBC lid.

Pobrania
247
Polubienia
19
Ocena
0
P
Printablesjfromel

Holiday Coaster - Fidget - Ornament (toture test)

Get in the holiday spirit and set the table with these fun coaster fidgets. You can also hang them on the holiday tree if you run a string through the infill mesh. That is if your printer can handle it, the tolerance between the rings is…

Pobrania
235
Polubienia
46
Ocena
5
P
Printablesmisan

Fermentation jar lid

A previous model I designed used a piece of cloth or paper to allow gases to escape while keeping the bugs out of my one-gallon kombucha jar. It occurs to me a similar goal could be achieved with a tight infill. So, I returned to the…

Pobrania
234
Polubienia
31
Ocena
5
P
PrintablesKtowns

Good job coin with solid words for school classroom or home good deeds

Made on both the Prusa Mini and Bambu X1C (Bronze on the Bambu and Red on the Prusa Mini)

Pobrania
234
Polubienia
38
Ocena
5
P
PrintablesDizzelowski

Door Slider SPACEMAKER A67 X6 replacement

Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…

Pobrania
229
Polubienia
5
Ocena
0
P
PrintablesSimple3D

Makerpipe Sliding Cross-Over for EMT Pipe

Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…

Pobrania
226
Polubienia
52
Ocena
0
P
PrintablesRemBrand

Puzzle box lid stand / holder - clamp-on version that grips to the lid

Reason for redraw Checked with SO who will use it most. She requested it to clamp to the box, so when you pick it up for closer inspection it won't fall off. The slit has two protrusions which creates a distance slightly less than the…

Pobrania
221
Polubienia
34
Ocena
5
P
PrintablesCelta

Low Profile Handle for Prusa Enclosure Hinged Lid

This design offers a low profile handle for the hinged lid add-on originally designed by the Prusa Research team for the Original Prusa Enclosure. Handle Features Simple and Discreet: The low profile design minimizes protrusion, creating…

Pobrania
219
Polubienia
31
Ocena
4,88
P
Printables-Koso-

Lid for Woven Heart Container

I printed the Woven Heart Container for a gift, but I thought it needed a lid, so I made one! Smooth lid fits nicely and I added a rope style handle which matches the container style. Printing 0.15 mm layer height for good quality/speed…

Pobrania
215
Polubienia
69
Ocena
0
P
PrintablesIan Black

YETI COOLER SLIDER FOOT

Push-in foot for Yeti Tundra 65 Cooler covering the existing rubber feet allowing the cooler to slide on hard surfaces, like the back of a pickup truck. I have a Tundra 65 so I don't know if this will fit on other size Tundra coolers. If…

Pobrania
205
Polubienia
24
Ocena
5
P
PrintablesAnkrila

Emlid Reach M2 pole mount

I wanted an easy way to mount my Emlid Reach M2 to my survey pole. Instead of using cable tiers, I created this mount for the M2 and a power bank. A complete review of my setup can be found here (Commercial in danish):

Pobrania
204
Polubienia
10
Ocena
5

Sliding Privacy Luggage Tag 2 Color Customizable in PrusaSlicer

Just download PrusaSlicer 2.6 , then open the 3MF file. You will be able to click on and change the text. The tag slides together and stays shut with a string or tie. This is to keep people from seeing your info unless it's important.…

Pobrania
203
Polubienia
35
Ocena
5
P
PrintablesSamuel Panák

Avatar Aangs Glider

Model of glider which Aang used in the series Avatar: The Last Airbender . File .3mf is set with ironing of all upper layers too with a first layer.

Pobrania
201
Polubienia
61
Ocena
0
P
PrintablesDingo_aus

A1 Lidar mount for Turtlebot3 Waffle plate

This design allows you to hold an A1 Lidar from RPLidar to the Turtlebot3 waffle plate. The waffle plate is a module robot base platform used in the open source Turtlebot3. The attached 3mf file includes my selection of variable layer…

Pobrania
199
Polubienia
7
Ocena
0
P
PrintablesPaPaja

Nerf Disruptor slider

Printed in 2 parts Left and Right Left piece has to printed with supports ,for the screw holes (I used prusa default supports which worked just fine) The model doesnt have any particular design on it so let me know if you would be…

Pobrania
194
Polubienia
12
Ocena
4
P
PrintablesQ

Digital Caliper (SR44) Battery Cover Lid (FDM printable)

A small plastic nose had broken off the battery cover of my beloved, older 300 mm caliper. So I designed a new one in FreeCAD. This is a battery cover for a digital caliper design with a SR44 button cell. This 3D model is as close as…

Pobrania
191
Polubienia
28
Ocena
4,75
P
Printableskennyd1gital

Small Cat Food Can Lid

A scaled-down version of Piney29887's Cat Food Can Cover for the smaller 3oz cans of cat food. Keep that food fresh between meals! Add your cat's name to the lid with the new text tool in PrusaSlicer 2.6!

Pobrania
191
Polubienia
21
Ocena
5
P
PrintablesDavid D

Original Prusa Enclosure - Slider Lock Latch - Optimised for printing

Optimised version of the Slider Lock Latch by @MichaelQ - at least for me. The original version did not print well for me, probably cause I am using a slightly bigger nozzle, probably cause of other reasons. Anyways I also wanted to get…

Pobrania
177
Polubienia
36
Ocena
4,62
P
PrintablesEcoDad

Waterslide Dice Tower

Rolling dice are meant to be seen - this waterslide dice tower lets you watch the dice slide, down and roll on the bumps. The original version v6 is a true slide and the dice usually do not roll at the end. The latest version v7 is easier…

Pobrania
177
Polubienia
45
Ocena
0
P
PrintablesLukas Knejp

Parkside / Lidl - Držák tužek pro nástěnný organizér na nářadí ( Pegboard Penholder )

Držák tužek pro nástěnný organizér na nářadí z Lidlu ( Pegboard Penholder ). Varianta 11,5 mm pro obyčejné tužky, a 17 mm pro fixy a silnější popisovače. Jednoduchý tisk s minimem tiskových podpěr.

Pobrania
176
Polubienia
34
Ocena
0
P
Printablesfuchsr

Wyze Cam Prusa Mount with Slide-in Connector

This is a remix of With_Maltodextrin's remix of Gabe's camera mount. I added the slide-in connector for the Wyze cam I developed for my other printers (eg…

Pobrania
174
Polubienia
22
Ocena
4,88
P
PrintablesKollin

Keurig 2.0 Replacement Drip Tray w/ Lid

Two separate models that fit pretty well together. Posting them together in case anyone needs to replace both pieces. The drip tray is a low-profile version that allows for bigger cups.

Pobrania
171
Polubienia
16
Ocena
0