Wyniki wyszukiwania: ltt

Sortowanie

505 modeli

P
Printablesfigterk

LTT Screwdriver Bit Holder (Multiple Sizes)

This is a holder for the extra bits that can be ordered for the LTT screwdriver. 12, 24, 36, 48 and 60 bit versions. The outer case is a single print with a print in place hinge. The inner bit holder part is meant to be print with…

Wydruk około 5,87 €–7,18 € nettoWstępna wycena jednego wariantu

Pobrania
3505
Polubienia
436
Ocena
4,86
P

Rigid Bit Holder LTT Screwdriver (60 bits, parametric)

This is a remix of figterk 's model to be able to use any rigid filament for those who don't have any flexible ones. I used the Gridfinity compatible model from DSwanlund for the dimensions. The bit holder fits right into the case, but…

Wydruk około 3,34 €–4,09 € nettoWstępna wycena jednego wariantu

Pobrania
559
Polubienia
69
Ocena
5
P
PrintablesEdward

LTT Keyhole/Extension Magnet attachment

Description This is my version of the keyhole/extension cord magnetic attachment seen on Linus Tech Tips. I am sure they will eventually come out with a great product so do check out their store, but for now, we can make our own! There…

Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu

Pobrania
260
Polubienia
123
Ocena
4,67
P
Printablescbrick

Better 3dprinted LTT Stubby ratcheting Screwdriver

This is a stronger, more functional and more accurate 3d-printable version of the LTT stubby screwdriver. You need these parts for the multi color version: 1x M3x40 screw 3x M3x12 screw 2x M3x8 screw 1x M3x6 screw 1x shaft print 2x…

Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
249
Polubienia
79
Ocena
5
P
PrintablesBerkley

LTT Scribedriver holder

For holding the LTT Linus Tech Tips Scribedriver Bolt Action Pen. Has room on the back for 8mm wide magnets. Make sure to use strong magnets as there are 2 layers of space between the pen and magnet. I taped in the magnets instead of…

Wydruk około 1,08 €–1,31 € nettoWstępna wycena jednego wariantu

Pobrania
13
Polubienia
3
Ocena
0

LTT Cable Management Clips - Magnetic Small -> XL Cable Organizer Arches

Print your own LTT Cable Management Arches! (Print/Assembly/Buyers Guide Attached Below) Shop the Original at lttstore.com Magnets: JC magnets are stronger than Amazon's: (JC recommended if you're not on a budget) Small(15x3mm): Amazon:…

Pobrania
5525
Polubienia
2381
Ocena
4,81
P
PrintablesLinus Tech Tips

LTT CPU Cases

They are finally here, CPU cases for your organization needs! Versions Included: 17XX 1851 Holder V12 20XX Holder V5 115X 1200 holder V8 AM4 Holder V11 AM5 Holder V8 Tools required: Hammer Extra Materials: 2 x 2D finishing nail 1" (25mm),…

Pobrania
3281
Polubienia
592
Ocena
4,91
P
PrintablesMKS

LTT Screwdriver, With Ratchet

Introducing the unofficial 3D-printed LTT screwdriver clone, equipped with a removable ratchet mechanism and storage for six bits. Assembly is simple, with potential for minor adjustments using glue if needed. Ongoing enhancements ensure…

Pobrania
2759
Polubienia
1251
Ocena
4,61
P
PrintablesKieran E

Gridfinity LTT Screwdriver and bit holder

I wanted a holder where I could grab just the driver and bit set I wanted, so I came up with this! The main 1x6 driver holder can optionally hold two rows of bits around the shank of the driver, or you can use the 1x1 bit trays if that's…

Pobrania
2411
Polubienia
252
Ocena
4,89
P
PrintablesMelSK

LTT Screwdriver Case

FYI If printing for the Transparent or Nuclear Screwdriver print at 102% as they seem to be slightly larger. Always liked the remixes of this box for other tools so thought I would have a go at creating my own for the LTT Screwdriver.…

Pobrania
1878
Polubienia
399
Ocena
4,95
P
PrintablesDSwanlund

LTT Screwdriver Bit Holder - Gridfinity

This is a Gridfinity -compatible screwdriver bit holder for the bit-sets sold by Linus Tech Tips. One of these (1x1x25) blocks will hold exactly one set of 12 bits. They are stackable when empty. LTT's bits are slightly shorter than…

Pobrania
1747
Polubienia
300
Ocena
4,83
P
PrintablesMKS

LTT Stubby Screwdriver

This is an unofficial version of the Stubby LTT Screwdriver with 5 bit storage. During testing the screwdriver could not be broken no matter how hard I tried. The metal thing is called a bit extender and is usually used for drills, costs…

Pobrania
1694
Polubienia
728
Ocena
4,68
P
PrintablesEltord

LTT Screwdriver Skadis Hanger

I needed a way to hang my new LTT Screwdriver on the Skadis pegboard that I have in my office. This just holds it vertically and it fits inside an angled hole that helps hold it vertical and keeps it from falling over. I've created a…

Pobrania
1361
Polubienia
145
Ocena
4,88
P
PrintablesErer2001

NOT - LTT Screwdriver - Fancy

GENERAL INFO I separated into 2 version: SIMPLE → https://www.printables.com/model/580064 In this alternative version the screwdriver body is a single color (You can still do color swap. Nobody can stop that…) and the cap is fixed so it's…

Pobrania
1293
Polubienia
625
Ocena
4,83

lttstore.com altoids tin bit case

Here is a link to an Etsy store if you'd like to buy the complete bit case from me: https://www.etsy.com/listing/1377181851/ltt-screwdriver-bit-case This is an insert for an Altoids tin for the LTT screwdriver. It can fit the entire set…

Pobrania
1246
Polubienia
218
Ocena
4,8
P
PrintablesGamma Blocker

Skådis / Skadis - LTT Screwdriver

Use with Ikea Skadis system and T-Clips to mount (see remix section). Be sure to print a T-Clip to go along with this model. After inserting the T-Clip fully, turn the printed model on its side, attach it to the Skadis board, and rotate…

Pobrania
1035
Polubienia
154
Ocena
4,94
P
Printablesfigterk

LTT Screwdriver Bit Holder Magnetic Retention (Multiple Sizes)

This is a remix if the inner portion of my original model. This one is intended to be printed with rigid filament (PLA, PETG, ABS, etc.). It has the corresponding number of holes on the bottom to insert 6x3mm magnets for bit retention.…

Pobrania
1015
Polubienia
132
Ocena
5

LTT Power Brick Holder Magnetic Bracket - Power Supply Cable Management Clip

Print your own LTT Power Brick Holder! (Print/Assembly/Buyers Guide Attached Below) Shop the Original at lttstore.com Parts List: JC magnets are stronger than Amazon's: (JC recommended if you're not on a budget) (20x5mm Disc Magnet):…

Pobrania
944
Polubienia
354
Ocena
5
P
PrintablesEdward

LTT Magnetic Cable Organizer

Notice If you don't need a magnetic holder check out my latest design HERE ! This is my design of the idea seen in some of the latest LinusTechTips videos. I am sure they will eventually come out with a great product so do check out their…

Pobrania
903
Polubienia
415
Ocena
5
P
PrintablesErer2001

NOT - LTT Screwdriver - Simple

GENERAL INFO I separated into 2 version: FANCY → https://www.printables.com/it/model/580045 Custom color accent ring and spinning end cap STUBBY → https://www.printables.com/model/595619 SIMPLE (This) In this alternative version the…

Pobrania
846
Polubienia
246
Ocena
4,89
P
PrintablesBrad Barlow

Gridfinity LTT Screwdriver holder with bit storage.

A remixed version of the Gridfinity LTT driver holder from "Kieran E" with a more accurate negative space for the driver and some adjustments made to the placement of the storage to allow for an additional 3 easily grabbable bits for…

Pobrania
740
Polubienia
85
Ocena
4,86
P
PrintablesJH3D

LTT "Quick Bits" Case & Stand for Linus Tech Tips Screwdriver Bits

I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…

Pobrania
706
Polubienia
193
Ocena
4,69
P
PrintablesMelSK

LTT Standard and Stubby Screwdriver Duo Case. 17/7/24 Updated

Created a new case to house both the stubby and the standard LTT Screwdriver together with up to 36 extra bits. I might make a bit holder magnet version like my other case down the line but it would end up way too bulky for me to put in…

Pobrania
644
Polubienia
162
Ocena
5
P
Printableshockeygoalie35

Gridfinity LTT Screwdriver

Gridfinity, 6x2 for LTT Screwdriver plus 72 bits. If requested, I can upload one without the bitholders. I Used the cut tool in Pusaslicer and then glued the two halves together (Ø5mm, 5mm long) . Update 05-15-2024 - Added several STLS…

Pobrania
613
Polubienia
190
Ocena
4,5
P
PrintablesMelSK

LTT Screwdriver Case MK2 Slim

FYI If printing for the Transparent or Nuclear Screwdriver print at 102% as they seem to be slightly larger. Re-design of my original case slimmed down to put in my laptop bag. No removable bit holder or need for magnets. Just wanted a…

Pobrania
601
Polubienia
105
Ocena
4,82
P
PrintablesDrew

LTT Screwdriver Rugged Case

Design Once I finally received notice my LTT Screwdriver shipped I went looking for a nice case / organizer for it and wasn't able to find anything that met my requirements. So I took the Rugged Box (Parameterizable) from Whity and the…

Pobrania
583
Polubienia
153
Ocena
5
P
PrintablesRiffnshred

LTT/Megapro Screwdriver Skadis holder

Perfect fit and easy to pickup and put back on. Designed using the great T-clip System: https://www.printables.com/model/256896-skadis-t-clip-system

Pobrania
544
Polubienia
97
Ocena
4,93
P
PrintablesToch419

Gridfinity LTT Screwdriver tray

I Remixed Insaniaxs case for use with Gridfinity because he has the nicest recess shape ive seen. Prints Nicely on an Ender 3 at a 45 degree angle on the bed.

Pobrania
537
Polubienia
59
Ocena
4,42
P
PrintablesMikhail

LTT Screwdriver Honeycomb Mount

Quick and easy mount to hold (and display) your LTT screwdriver. Should provide a snug enough fit so it doesn't fall out but is easy to grab and go. Step file is included if need to make adjustments or use with other wall organizers.

Pobrania
518
Polubienia
102
Ocena
5
P
PrintablesNota

Rugged LTT Bit Storage (61 Bits)

My version of an LTT Bit storage holder for the 20mm bits that are available for the LTT Screwdriver. This was a bit of a pain because I am terrible in Fusion360, but after many failed prints I was able to come up with something.…

Pobrania
448
Polubienia
82
Ocena
5
P
Printablesrtarbutton

LTT Magnetic Cable Arches

I wasn't really happy with the other versions I found here on Printables, plus I wanted to make them look as close to LTT's as I could. The other version I printed before had a small spot for the magnets and I wanted a larger magnet for…

Pobrania
446
Polubienia
216
Ocena
5
P
PrintablesHydra

LTT Screwdriver Bit Holder

I bought all of the extra bits, which totalled 72 bits. I didn't want them just laying around getting lost in the depths of my workspace so I made this simple bit holder to sit on the workbench, providing me with easy access to every bit.

Pobrania
439
Polubienia
41
Ocena
4,75
P
PrintablesMiniMadRyan

LTT Screwdriver Mockup

A quick attempt at modelling a somewhat accurate LTT screwdriver based on the dimensions and sizes of my own LTT screwdriver. this model is intended for those who want to create their own cases/holders/whatever and need a slightly more…

Pobrania
436
Polubienia
36
Ocena
5
P
PrintablesLimit

Gridfinity LTT Screwdriver Holder

1x1 Gridfinity holder for the LTT screwdriver. Created using the startpart from Zach Freedman.

Pobrania
422
Polubienia
58
Ocena
4,91
P
Printablesiano0100

improved ratchet for LTT screwdriver

improved ratchet for @cheffhd_1205785's ltt screwdriver, with more 3 times more "fins" as the original it should be 3 times as strong, im trying to make the ratchet even stronger, so maybe ill update the file included (or add a v3.5). I…

Pobrania
418
Polubienia
42
Ocena
5
P
PrintablesKeegan Phillips

LTT Screwdriver Case

A case for the LTT Screwdriver which also holds 24 bits. Any 1/4" Hex bits will fit, not just shortie bits or full size, both will work. I printed it all in PETG using a .28mm layer height. I haven't tested the up-to-date version of the…

Pobrania
386
Polubienia
71
Ocena
4,6
P
PrintablesJacob

Modular Bit Holder - LTT Store Screwdriver

The LTT Store screwdriver is fantastic. However, the extra bit storage is not. This modular bit holder is the perfect companion to your LTT screwdriver! This design features several valuable features: Its modular/stackable design allows…

Pobrania
366
Polubienia
74
Ocena
4,5
P
PrintablesBen

LTT Screwdriver Holder for the Ikea Skadis

I wanted a clean, easy-to-use Skadis holder made specifically for the LTT screwdriver — and after trying a bunch of designs online, none quite worked due to the screwdriver’s unique shape. So I made this! The goal: ✅ Minimal enough to…

Pobrania
365
Polubienia
39
Ocena
4,83
P
PrintablesEdward

LTT Magnetic Cable Organizer (NEW BASE)

Notice If you don't need a magnetic holder check out my latest design HERE ! This is an addition to my original model which now features a base plate so you can use it on legs like the Ikea Lack all you need is 2 screws! This is my design…

Pobrania
364
Polubienia
187
Ocena
5
P
Printablesdej_Matt

LTT Screwdriver "shorty" 20mm Bit Case/holder

Stores 24 of the 20mm "shorty" bits for the LTT screwdriver. I printed with 0.20mm layers and 5% infill, no supports

Pobrania
351
Polubienia
52
Ocena
5
P
PrintablesCromFr

HSW LTT Screwdriver mount

This is a mount for the Honeycomb Storage Wall I wasn't happy with the existing screwdriver holders (too blocky / squary or unpractical in tight spaces), so I made my own model :) You'll need an empty insert to mount it

Pobrania
340
Polubienia
38
Ocena
5
P
PrintablesDivideby0

Altoids insert to hold LTT Screwdriver bits

Altoids insert to hold LTT Screwdriver bit sets - holds 4 sets (48 bits) Note: to avoid rattling, the insert will need small shims on either long side (it has to be smaller than the opening to fit past the rolled edge); I used the end…

Pobrania
322
Polubienia
64
Ocena
4,67
P
PrintablesLinus Tech Tips

LTT Headphone stand w/ pen holder

Print instructions Category: 3D Printing Summary Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: generic pla any Notes: Print the holder vertically to minimize supports.…

Pobrania
318
Polubienia
58
Ocena
5
P
PrintablesRiffnshred

LTT screwdriver + Bit storage holder for Skadis

A simple LTT/Megapro Screwdriver and bit case holder for the Ikea Skadis using the great T-Clip System. Find the bit case here: https://www.printables.com/model/323000-pocket-size-bit-storage-case The T-Clip System:…

Pobrania
312
Polubienia
110
Ocena
5
P
PrintablesPhants

Gridfinity 1x3 LTT Stubby Screwdriver

Designed to support a stowed LTT Stubby Screwdriver with or without a bit inserted in the shaft.

Pobrania
307
Polubienia
33
Ocena
4,9
P
PrintablesJonnyBooker

LTT Screwdriver Holder

"I wanted a place where I could always put my screwdriver and always be ready to grab and use. Not perfect, but relatively happy with it and does the job. Time Taken on Bambu X1: 42 minutes for base 30 minutes for other pieces You will…

Pobrania
300
Polubienia
83
Ocena
4,91
P
PrintablesMacBoy__Pro

LTT Screwdriver and Bits Gridfinity Box

Remix of the parametric gridfinity rugged box with the LTT logo which was designed to be used with https://www.printables.com/model/290486 (link is dead, included with the files). Box - Lid has gridfinity tiles whereas Box-Top doesn't…

Pobrania
289
Polubienia
64
Ocena
3,5
P
Printablesjatkinson10

40 oz LTT Water Bottle Extender

UPDATE : I've built a better version. Try it out here: 40 oz LTT Bottle Extender - Improved I love my 40oz LTT water bottle and take it everywhere but it won't fit in my car cupholders. I modeled this up to make it easier to transport.…

Pobrania
280
Polubienia
48
Ocena
5
P
PrintablesCeroo

LTT Precision screwdriver bit set holder for IKEA Skadis pegboard

About A simple yet secure holder for the Precision Bit Set + Case for the Ikea Skadis pegboard using the Skadis Ultimount connector. The original design was based on the iFixit Mako Screwdriver Mount for Ikea Skadis Print instructions…

Pobrania
278
Polubienia
30
Ocena
5
P
PrintablesBlodorn

LTT Screwdriver Bit Holder

The LTT Screwdriver allows you to store up to 12x20mm bits in the handle, but there is no real storage solution for the additional bit sets other than leaving them in their little cardboard sleeves. This tray allows you to store up to 6…

Pobrania
268
Polubienia
27
Ocena
5
P
PrintablesErer2001

NOT - LTT Screwdriver - Double bitholder carrying case

ATTENTION: This is an accessory for the “Definitely Not LTT Screwdriver” found here: → https://www.printables.com/model/580045 (Fancy version) → https://www.printables.com/model/580064 (Simple version) I included a .dfx file so you can…

Pobrania
268
Polubienia
83
Ocena
0
P
Printablesknadams

LTT Screwdriver "shorty" 20mm Bit Case/holder remix

I really liked dej_Matt's design, but I ordered 3 of LTT's bit sets, which means that I needed space for 36 bits. I took their design into Ansys SpaceClaim and redesigned it to hold 12 additional bits while only increasing the overall…

Pobrania
263
Polubienia
38
Ocena
5
P
PrintablesmolfFX

LTT Screwdriver Multiboard Mount

Modified from Mikhail design to work with Multiboard. Nice snug fit compared to generic screwdriver holders. Works with standard Screwdriver and Stubby screwdriver. Linus Tech Tips Screwdriver.

Pobrania
249
Polubienia
37
Ocena
4,6
P
Printablescogspace

Gridfinity 1x3 LTT Screwdriver Bits (x48) Holder [Magnetic]

NOTE: This print is designed to be paused at Z = 9.5 mm using an M600 command so that six 60 x 10 x 3 mm bar magnets (~$6 on Amazon ) can be inserted before resuming the print. Gridfinity-compatible screwdriver bits holder - designed…

Pobrania
237
Polubienia
45
Ocena
4,75
P
PrintablesAngus L

LTT Screwdriver under desk drawer

DISCLAIMER: I do not I think this model is a fully mature and optimized design, I already have in mind 100's of ways to improve it but sadly I have extremelly limited time during nights to get this done and keep my full-time job. but in…

Pobrania
226
Polubienia
126
Ocena
5
P
PrintablesKeroro

LTT Backpack support

I was used to my LTT backpack always slumping forward, and one day at work, I noticed a TripLight surge protector box fit snugly and stopped it from leaning forward. So I quickly tossed a model and a printer to place at the bottom of the…

Pobrania
221
Polubienia
34
Ocena
5
P
PrintablesMegaCadler

Pulttray for Radiomaster TX16S

This is my Pult Tray for Radiomaster TX16S transmitter. The parts named "Aloy_..." shall not be printed but rather made of Aluminium for best robustness. The Leather Applications are not required but make it comfortable and look…

Pobrania
212
Polubienia
20
Ocena
0
P
PrintablesKilian Herbst

LTT Screwdriver Custom Cap Colors

I recently figured out that the cap is removable without any tools, (do this at your own risk, it may damage your Screwdriver), so i decided that it would be cool if you could change your own caps, this only works with petg because its…

Pobrania
212
Polubienia
59
Ocena
5
P
PrintablesKlayton

LTT Screwdriver Skadis Mount

Ikea Skadis mount/holder for the LTT Screwdriver. The t clip required for mounting is included in the STL file. Remixed from the model by Riffnshred and the Skadis T-Clip System by Line Arc Line. MY PRINT SETTINGS: Printer Print Time…

Pobrania
209
Polubienia
27
Ocena
5
P
PrintablesMatt Auger

LTT Screwdriver Pegboard

Remixed the file to fit a pegboard for my needs

Pobrania
207
Polubienia
22
Ocena
5
P
PrintablesTrase

LTT Stubby Screwdriver with ratchet

Mix of two models to add ratcheting mechanism from @Martin Rigatoni to LTT Stubby Screwdriver from @CheffHD. You will need two rachets, everything else is by one piece. Be careful with supports in handle - there is a tiny guide slots on…

Pobrania
201
Polubienia
31
Ocena
5
P
Printablestrupek56

Honeycomb wall LTT screwdriver holder

My own make. You'll need a empty insert from original model. Printed without any supports

Pobrania
200
Polubienia
34
Ocena
4,86
P
PrintablesEchoTiger006

LTT - Screwdriver Orignal and Stubby Case

This screwdriver case can hold a staggering 72 LTT "shorty" bits. The key eye amount you saw the title, the title is not clickbait. You can fit both the original and the "Stubby" screwdriver in one case. All color variants of the "Stubby"…

Pobrania
194
Polubienia
29
Ocena
0
P
PrintablesPRINTER JAM

LTT / Linus tech tips logo

The LTT logo from the linus tech tips youtube channel STL and STEP

Pobrania
189
Polubienia
20
Ocena
5
P
PrintablesJustin

LTT Screwdriver Case Bit Holder 6x3 Magnets

Added 12 6MM X 3MM Recess Holes For Magnets.

Pobrania
188
Polubienia
32
Ocena
5
P
PrintablesMatt Dyson

LTT Screwdriver Bit Wall Mount Storage

A simple wall-mount to hold 4 sets of the LTT Screwdriver Bits - these bits are shorter than most screwdriver bits, so I took inspiration from some other designs and designed my own. If you've used this model, please consider sending a…

Pobrania
187
Polubienia
28
Ocena
5
P
Printableskwfredeen

1 Inch Pegboard LTT Screwdriver Holder

LTT Screwdriver holder for 1 inch pegboards. Printing Instructions Print in downloaded orientation. Supports will be necessary.

Pobrania
185
Polubienia
22
Ocena
5
P

LTT to IFixit Adapter

This adapter takes the small 4mm bits from IFixit and adapts them to the ¼" bit size of the LTT screwdriver. It is fairly low torque as the version I have printed will spin inside the ¼" tip of the LTT screwdriver It will print nearly…

Pobrania
184
Polubienia
42
Ocena
4,75
P
PrintablesInsaniaxs

LTT Screwdriver Case - 12Bit and 24Bit Version

Just another case for the LTT screwdriver. I sliced the model with PrusaSlicer 2.5.0 without adjusting any setting and printed it with the inside of the case facing down. Added a version 2: added 2 pairs of magnets at the latch deepened…

Pobrania
179
Polubienia
39
Ocena
0
P
PrintablesErer2001

NOT LTT Stubby Screwdriver - Fancy

GENERAL INFO I separated into 2 version: SIMPLE → https://www.printables.com/model/595624 In this alternative version the stubby body is a single color (You can still do color swap. Nobody can stop that…) and the cap is fixed so it's…

Pobrania
179
Polubienia
50
Ocena
4,75
P
PrintablesShadow

LTT Stubby Screwdriver with modified bit holder and ratcheting option

General After some experiments with all this 3 projects I came out with one remix to join best of them all in one. This remix includes new type of a bit holder and body to build a ratchet version as well as a regular one. None of work is…

Pobrania
174
Polubienia
26
Ocena
5
P
PrintablesNomads Galaxy

LTT Multiboard Screwdriver & Precision Holder

Simple LTT Screwdriver holder for Multiboard

Pobrania
171
Polubienia
14
Ocena
4,67
P
PrintablesRedec

LTT Screwdriver adapter for iFixit Bits

This allows you to use your iFixit bits in your LTT screwdriver. The magnet does go through the plastic base so the bit doesn't fall out.

Pobrania
171
Polubienia
26
Ocena
5
P
Printablesfreejstn

LTT Screwdriver Skadis Holder - TNut

Overview This is my LTTStore screwdriver mount for my Ikea Skadis, which uses the T Nut System made by 6d6178 and was made using dimensions from MiniMadRyan's LTT Screwdriver Mockup . It has a number of versions included with/without…

Pobrania
170
Polubienia
29
Ocena
5
P
Printableshinton

Magnetic Cable Organizer Arc [LTT Style]

This is my take on a magnetic cable organizer! It features a parametric source design, no harsh corners and easy attachment. The bigger arches use a magnet with a hole, so that a simple lighter can be used to heat up the pin, and deform…

Pobrania
170
Polubienia
44
Ocena
0
P
PrintablesRaddic

Ikea Skadis Angled Modular Bit Holder for LTT Screw Driver

Changed the bit storage to accommodate the 12 shorty bits that come in each LTT bit pack. The screw driver holder pictured is the LTT Screwdriver Skadis Hanger from Eltord…

Pobrania
169
Polubienia
24
Ocena
5
P
PrintablesJake

LTT Screwdriver Stand

A stand to display my LTT Screwdriver like a katana.

Pobrania
168
Polubienia
26
Ocena
5
P
PrintablesLinus Tech Tips

LTT Deskpad Tester - CoreXY

CoreXY mouse tester. Bom attached. Uses GRBL and a RAMPS for control.

Pobrania
168
Polubienia
64
Ocena
0
P
Printableslcharsh

LTT Screwdriver & Extra Bits Gridfinity storage

This was made to not only store the extra bits that don’t go into the screwdriver but the screwdriver itself. I don’t carry it with me but when done for the day I wanted a place I can store it along with extra bits. based on Zack…

Pobrania
166
Polubienia
35
Ocena
4
P
PrintablesLimit

LTT Screwdriver Color Ring

Add your personal flair to the LTT screwdriver by printing a colored ring that sits below the direction selector. Ring is designed to sit under the selector without impeding its function. The model is printed as a single ring to get a…

Pobrania
164
Polubienia
42
Ocena
4,67
P
PrintablesiZboxo

LTT Commuter Backpack Strap Clip

Why? Because mine clip also broke. https://www.reddit.com/r/LinusTechTips/comments/1iuuew2/commuter_backpack_strap_clip_broke/ Support does not currently offer replacement. Since you can't get the strap out of the metal thing (you can…

Pobrania
162
Polubienia
34
Ocena
5
P
Printablesssjbardock

LTT Screwdriver Bit Holder for 72 bits w/ legend

Decided I wanted a holder that could hold ever available bit, plus the ones that came with the unit. Extended the original case, and added 12 more bit spaces to the flex holder. Also includes a legend to place in the top half

Pobrania
162
Polubienia
18
Ocena
3
P
PrintablesLoss of signal

Gridfinity - LTT shorty screwdriver

Gridfinity LTT shorty screwdriver holder. Very basic design would need a bit of work to make it actually good, but it is working well enough.

Pobrania
161
Polubienia
23
Ocena
0
P
PrintablesMivin

HSW LTT Hex Bit Holder

24 slot hex bit holder that I made shallow enough for LTT driver bits. Mounts with an m3 socket head cap screw. Print with the back flat on build plate with standard settings. Happy Printing

Pobrania
161
Polubienia
25
Ocena
0
P
Printablesm.a.g.

Schilder für Vorzelttaschen (Camping)

Ich habe die Seiten und Vorderwände unserer Thule Markise auf 3 Taschen aufgeteilt, da ich nicht immer alle mit in den Urlaub nehme. Um die Taschen kenntlich zu machen, habe ich diese Schilder designed und mit Paracord an den Taschen…

Pobrania
160
Polubienia
40
Ocena
0

LTT Store Driver + iFixit Manta Rugged Case

I have both the iFixit Manta & LTT Store driver, I wanted to keep them together in a way that stacked well with my tools. I made this box to let me keep the original Manta case intact. You will need 6 M3x30 screws. As always, I've…

Pobrania
159
Polubienia
62
Ocena
0
P
Printablesjufy111

Gridfinity LTT screwdriver bit bin

2x3 Gridfinity bin to hold all the LTT bits. The bits are recessed into the bin so that another bin can stack on top without colliding with bits in the case. Additional files are provided to allow an extra 2mm depth in the bit slot if you…

Pobrania
157
Polubienia
38
Ocena
4,5
P
PrintablesWikkidyy

LTT Screwdriver holder SKADIS

A combination of the LTT screwdriver holder with some SKADIS hooks on the back. Sits pretty secure on the board. Printable in the attached orientation without supports but make sure you have good bed adhesion. Alternatively printable…

Pobrania
154
Polubienia
20
Ocena
5
P
PrintablesRobby

Belttensioner Replacement Arms

Replacement for the Arms of the Belttensioner designed by Wotever. Additional parts needed: 1x M8x70 Bolt (50mm Belt) or 1x M8x100 Bolt (76mm Belt) 1x M8 Nut (to hold the M8 Bolt) 1x M8 Washer (8,4x20x1,25mm) 2x M3x10 Bolt (to hold…

Pobrania
153
Polubienia
13
Ocena
5
P
Printablesidpromnut

LTT Screwdriver Holder (Belt and wall mount)

This model uses a friction-retaining system designed for the Linus Tech Tips ratcheting screwdriver (no affiliation with LMG/LTT/etc). The retaining arms should be strong enough for daily use and they even hold the screw driver when the…

Pobrania
153
Polubienia
31
Ocena
4,25
P
Printablesjatkinson10

40 oz LTT Bottle Extender - Improved

This is a redesign of my original design (https://www.printables.com/model/339398-40-oz-ltt-water-bottle-extender). I thinned out the walls and added some style/strength with the embossed ribs. Print it in the following: PETG No Supports…

Pobrania
149
Polubienia
23
Ocena
5
P
PrintablesSeaPear

Gridfinity LTT 6mm bit holder (FIXED)

The previous versions tolerance was too tight so I added some extra room for them to fit

Pobrania
144
Polubienia
21
Ocena
1,5
P
Printablesfreejstn

Minimal LTT Screwdriver Skadis Holder - TNut

Overview This is a heavily modified and slimmed down version of my LTTStore screwdriver mount for my Ikea Skadis, which uses the T Nut System made by 6d6178 and was made using dimensions from MiniMadRyan's LTT Screwdriver Mockup . My…

Pobrania
141
Polubienia
35
Ocena
5

LTT Screwdriver Wall Mount

A remix of an unofficial wall mount for the LTT Store Screwdriver updated to allow for more secure dual screw mounting

Pobrania
141
Polubienia
17
Ocena
5
P
PrintablesHaroldhues

LTT Dual Screwdriver, Shaft Extender, Pen, and 60 bit holder

Adds more bits to MelSK 's model to hold all 60 extra bits. Both top and bottom are modified, but the latch and hinges are the same. You'll still need 8 m3x20mm machine screws.

Pobrania
140
Polubienia
21
Ocena
5
P
PrintablesJCShumpert

LTT/Hydro Flask Mug: Hydro Flask and Coffee Mug MODULAR Car Cup Holder Adapter

My wife and I really liked BadKarbon 's taller top for this cupholder adapter. It works great for my wife's bottles and coffee mugs. I had some fitment issues with mine though. My LTT 40oz water bottle fits but is so snug that it scrapes…

Pobrania
140
Polubienia
18
Ocena
0
P
Printablescode3

Sy's Peglock - LTT Screwdriver

Adapted Eltord's LTT Screwdriver Hanger to work with Sy's Peglock. Requires "Board Attachment (Universal)" from “Sy's Peglock - Locking Pegboard System.”

Pobrania
138
Polubienia
17
Ocena
4,67
P
Printablesmista_niku

Bambu Lab P1P Pegboard Modplate LTT Screwdriver holder

A holder for the LTT screwdriver that mounts on the P1P pegboard modplate

Pobrania
137
Polubienia
28
Ocena
0
P
Printables3DLada

Ltt LinusTechTips Keycap

Ltt LinusTechTips Keycap printed with Black and Orange

Pobrania
137
Polubienia
70
Ocena
5
P
PrintablesEdan404

Gridfinity LTT CPU Case holder

Designed to hold 6 LTT CPU cases https://www.printables.com/model/1191951-ltt-cpu-cases

Pobrania
136
Polubienia
18
Ocena
4,5