12 508 modeli
IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…
Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu
I needed a method of connecting a "webcam" to my printer for remote monitoring from around the house via Octoprint. So, this comes in a couple pieces: A connector that snaps to the 30x30 extrusion frame (Y-axis on Prusa, and possibly…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Camera mount that attaches to the aluminium extrusion of the frame of the Prusa i3 MK3/MK3S. The mount should fit any webcam with a 1/4" tripod mount by using a 1/4"-20 screw. The clip might interfere with the Y carriage bearing if…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
Simple sliding cover for your laptop camera. Use thin double-sided tape to attach.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
MODEL DETAILS This is a print-in-place, torture test for your 3D Printer, that works as a fidget toy. If you liked this model, why not try out our other stress tests too? You can find out all about Revo Hemera XS here! RECOMMENDED PRINT…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I uploaded a video where I show the design and assembly process. I tried making the camera as simple as possible, but some parts might be difficult to get. The ratchet wrench components used for the film advance mechanism are totally…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an iMac Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The mounting of this bracket is achieved by clip-fastening! The development of this camera mount was inspired by various mounts that can be found on Thingiverse. As it is, none of them was exactly what I had in mind. That's why I decided…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
For the articulated arm that holds the RaspberryPi camera on my Prusa Mini, I needed a way to fine adjust the viewing angle of the camera. So I opted to design a ball joint. I did a number of prototypes to try out how much the socket…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Whenever I got promotional cards, business cards, or even just a useless deck of cards lying around, I would always turn them into tiny boomerangs. But the problem I always had was always how quickly they would deform after a few throws,…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Boomerang for left and right handers … still improving the flight characteristics V1: 2023-03-02: V2 added
Wydruk około 4,34 €–5,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made a wall mount for Tapo C210 WiFi camera. It should work with other Tapo cameras because I think they have the same mount. Made it in 4 parts for easy printing. Easy to put together, glue recommended. There are holes for screws on…
Wydruk około 7,46 €–9,12 € nettoWstępna wycena jednego wariantu
Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…
Wydruk około 1,56 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The new continuity mode for iOS and MacOS allows anyone to turn their iPhone into a webcam. The problem is not everyone has an Apple Studio Display or another specific display. The same goes for iPhone models and phones with cases. The…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Logitech C270 mount for KOBRA 2 PRO/PLUS/MAX Updating Kobra 2 pro/plus/max to versions above 3.0.5 , it is possible to connect a USB camera and watch the printing process using Anycubic app . I found my old camera and created a mount for…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Here is my iPhone Monitor Mount, the perfect solution for using your iPhone as a webcam during Zoom and other FaceTime calls. This mount is designed to work with a Viewsonic monitor and may work with a variety of other monitors. This…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook Pro and the Apple Studio Display, but might fit other MacBooks and…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
This is a very simple box for the new Raspberry Pi HQ camera module as I wasn't comfortable having a bare PCB flapping around. To install the module carefully remove the rear focus adjustment ring. Screw the module down into the case with…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Die montage an der rechten seite der X-Achse führt zu einem guten blick auf die Düse. Mounting on the right side of the X-axis results in a good view on the nozzle.
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Camera mount to attach a Wyze camera to your Ender 3 S1. It's still a WIP as it'll require a dab of hot glue to actually hold on to the printer. Prints easily on my Ender 3 S1, just have to flip the model 180* so it'll sit flat. No…
Wydruk około 1,72 €–2,11 € nettoWstępna wycena jednego wariantu
This is a remix of samlovecroc's “Non-MagSafe iPhone Holder for Continuity Camera” that will support the MacBook Pro's screen depth and larger iPhones including those with cases on. The form of samlovecroc's design is preserved the…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
All the assembly is press fit. Print on given orientation, no need of supports. I recommend to use additional perimeters (e.g. 4) on the clamp piece, to increase stiffnes. PETG material recommended use, but not essential. 160 FOV CAM: 65…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
This is a remix to an existing camera mount. The remix adjusts the camera height and spacing from the print bed for better alignment with the first layer and to allow clearance for side drawers (the side drawers I've printed are:…
Wydruk około 4,36 €–5,32 € nettoWstępna wycena jednego wariantu
This is an adaptation of the camera back from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 , inspired by and simplified from the Raspberry Pi Hi Quality Camera Case Adapter . I've adjusted the back plate of the…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
I liked the mounting system created by Sneaks. But it did not fit my Raspberry HQ camera. i made this case to fit on the arm with the same ball system as the original case. I printed it in PETG. Its made to be a tighth fit with the…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've built an enclosure with an Ikea Lack. Recently I've baught a Raspberry Camera High Quality(the one with interchangeable lens. I created a mount, which can pivot in 2 directions. I've printed it without support. It requires: 1x m3…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple remix to add the ball mount to the back of a PRI Night Vision Camera Mount. Print instructions Print with supports on build plate only.
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
Combined and designed this setup from the best ideas and designs I could find (in my humble opinion of course) Features: Single piece backplate. No loss in build volume. Nozzle in original position. Cable routing thru backplate for nice…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I hunted at length for a mounting bracket made specifically for the Blink Mini that would mount it high enough above the bed to see the model, low enough to see the extruder nozzle, and offset far enough forward to be able to spot…
Wydruk około 3,39 €–4,15 € nettoWstępna wycena jednego wariantu
Leckerli One Font Cake Topper Numerals 4cm high numerals, easily scalable (150% = 6cm, 200% = 8cm, etc.) Use the mirrored versions in case you like to have your buildplate pattern on the front. Font licensing The font “ Leckerli One ” was…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Perfect camera angle! Doesn't block the light from the LED-addon and supports all the official prusa add-ons. Fits the Raspberry Pi Camera V2 Part list PiCameraMount Raspberry Pi Camera V2 (and the cable) M3nS nut (2x) - (Prusa spare…
Wydruk około 2,87 €–3,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the ultimate laptop holders organization kit. This will help you organize all necessary accessories for your laptop. Your desk will look extra clean. Kit includes : AirPods Holder with optional camera cover Single camera cover…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Mount your Logitech C270 Webcam to the X-Axis on a Prusa i3 MK2/MK3. The C270 is my go-to webcam for integration with OctoPrint, and this is my favourite "nozzle view" mounting system. Update April 4, 2021: Fellow PrusaPrinters user…
Wydruk około 4,07 €–4,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pole mount for dahua cctv cameras, it is designed to hold the cameras with the rounded base by inserting a nut and an M5 screw. To mount it to a pole you will also need a U shaped bracket, as the one used to hold antennas. I hope it's…
Wydruk około 6,18 €–7,55 € nettoWstępna wycena jednego wariantu
Mount fot cctv camera that enables the possibility to mount it to a corner of a building. Reccomended for the camera to be a 360º or a rotating camera. If neded any modifications for the mounting holes don't hassitate to ask.
Wydruk około 5,13 €–6,27 € nettoWstępna wycena jednego wariantu
Use this cover to give assurance of privacy on your laptop or tablet. You realize that the camera still functions even if no app or program is using it. Many background apps & browsers could still be viewing you. Covering the camera is…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
MATERIAL Raspberry Pi 4b Raspberry HQ Camera C-mount lens. In my case a 100mm telephoto lens . Cooling housing for RPi 4b (total height below 24mm) Anker 2000PD or Anker 325 Powerbank USB-A to -C cable Threaded inserts for tripod mount. I…
Wydruk około 5,10 €–6,23 € nettoWstępna wycena jednego wariantu
Smartphones put power in the hands of everyday people to hold awful behavior to account, but holding up a phone makes you a target. This print lets you use your phone as a body camera, and attaches to a shirt, lanyard or backpack. Add an…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
Just a fun little game that you can print and throw. Hold the leg with the hole in it in your right hand and throw with a flick at around 45 degrees to see if you can get the boomerang to return to you. I find a light weight (0.4 nozzle)…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stand for A9 Mini WIFI Camera
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
If you have printed https://www.printables.com/model/247783-hasselblad-film-magazine-mount-pinhole-camera-matt then you can print this cone and get a 30mm/0.2mm pinhole, i.e. f150, 90 degree angle pinhole camera. Material PETG, e.g by…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
————Required Hardware———— Item Cost Seeed Studio XIAO ESP32 S3 Sense ~$24 IKEA Lillhult USB-A to USB-C Cable ~$5 Old Apple (iPhone) 5W USB power adapter ~$0 5 × M3-0.5x8mm Socket Cap Screws ~$4 I pick the Seeed Studio XIAO ESP32 S3 Sense…
Wydruk około 1,91 €–2,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple holder for the camera TrueLife NannyCam H32 printed as a single piece. The camera holder is just a cut cup, ensuring a firm grip on the camera. The connected base now has stronger feet to ensure a proper and stable grip, even with…
Wydruk około 2,25 €–2,74 € nettoWstępna wycena jednego wariantu
Here is my design of a modular camera mount that snaps onto the aluminium extrusions of the MK3/s frame. The provided mounting plate is suitable for the "YI Home Camera 1080p", however I've provided fusion files so you can design a cutom…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The model files are not mine. However, I was able to assemble exactly what I wanted by combining files from different projects. For this reason, I wanted to collect and publish it for those who want to make a similar montage. You need: M5…
Wydruk około 3,34 €–4,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d…
Wydruk około 26,82 €–32,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
English below. Hier ist ein Remix der auf 80% gescaled vom Orignal ist, um Gewicht und Platz zu sparen. Dieses Stativ ist ideal für reisen mit kleiner Fotoausrüstung ohne auf etwas zu verzichten! Hoch oder Querformat sind problemlos mit…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
This case doesn't require any additional hardware, it just snaps in place. I suggest printing it with PETG but also PLA should work as well. To make the snap fit work propely be sure that there aren't any debris in the way left after the…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
15 degree base for Tapo C200 camera or can be used whitout feet for a flat base. Supports needed on build plate only for the base. Tree supports are easier to remove. For asembly use 2 M3x10 bolts.
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Priehľadný akrylový kryt som použil z atrapy bezpečnostnej kamery od výrobcu ORNO typ OR-AK-1210. Priesvitný kryt z uvedeného typu atrapy pasuje presne na vymodelované kolíky v hornej časti krytu. Pre fixaciu sú použité 4 ks podložiek ,…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
This is a complete ecosystem of parts needed to place a small camera somewhere and fine adjust its orientation around all three degrees of rotational freedom. The problem: Using an action camera to capture our wild and crazy activities…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
(Please find English Text below) DE: Versteckte Anbringung eines Apple AirTags an die Fotokamera: Die Halterung wird einfach in das vorhandene Stativgewinde geschraubt. Optional kann ein kleiner Stift zur Arretierung verwendet werden. Für…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
This is a very simple case for the Raspberry Pi HQ Camera. It's useful for covering the bare PCB of the camera when you want to use it on a tripod (via its own mount) without being attached to the Pi or anything else. It is designed to be…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
This model lets you mount a Freenove ESP32-WROVER board (buy from their global site or Amazon ) in your enclosure and use it to automatically upload images to Prusa Connect. The mount provides two degrees of freedom to adjust the aim of…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I use this mount on my RC planes that need an extremely light weight fpv solution. I use the AKK A11T FPV camera for this, but attaching them to my planes was always pretty janky before I came up with this mount. I used PETG at 0.10 layer…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
iMac 24 2021 Camera Cover for LEGO Filament ABS or PLA or PETG
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
First things first. I can’t really take any credit for any of this model. The hat is an awesome model that I just made bigger and added some modifiers. The only reason I’m uploading it as a model is to make it easier for other ring owners…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
💬 Summary A set of protective lens caps designed for the Samsung Galaxy S24 Ultra . These caps fit over the three main camera lenses to prevent scratches, dust accumulation, and impact damage. A simple, fast print that adds a layer of…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
I really struggled to find anything easier and functional than over complicated and bulky solutions, so I ended designing this. This is not a final design so please if you notice any problem or you have suggestions on how to improve it…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
I made this model to align my cheap USB cameras for stereo imaging. It's press fit for the PCB, and enough space to add some glue to fix the cables. Distance of the cameras is 35mm. I'll add a cover plate later maybe with a strain relief.…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
You can use this mount for every camera/webcam with screw mount. This mount is for Prusa MK3S, MK3, MK3S+, MK4, MK3.9, MK3.5, MK4S, MK3.9S and MK3.5S. I printed in PLA Camera mount and screw Infill: 15% Layer Height: 0.20mm Supports: No…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Needed a way to hang a speaker from my disc golf bag. The speaker has a standard camera tripod screw (¼ - 20), so I made the part with a big enough eyelet to hook onto a carabiner. Could be used for a number of applications: Lanyard/strap…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Love Adafruit's Raspberry Pi HQ Camera Case ? Love the beautiful Pimoroni Hyperpixel 4.0 display? Now they can play together! This page contains the two models required to make the Hyperpixel 4.0 work with the Adafruit-designed case - a…
Wydruk około 3,48 €–4,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple case for the Raspberry Pi HQ camera. Rear side of case has a raspberry pi logo. I’d suggest printing with a <.15 layer height. It is based on the Pi mechanical drawings and the holes fit M2.5 screws. Make sure the front/back of…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a passive stabilizer for cameras. It was made mostly to make smooth stable video. Most parts are printed in petg at 0.20mm. The stabilizer model is printed in pla at 0.15mm this is for a little extra give. If the dove tails don't…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
I wasn’t aware the M12 variant existed… I thought there was only one model of HQ camera so I was a bit surprised when I unboxed it. I couldn’t find a way to mount it to my telescope so I put together this basic design. I used some…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
In the pursuit of the “perfect” mount, I printed a series of mounts that where not very good or fragile. I decided to make my own so I could shut this hunger of mine. Made one based off two models I found and added some structures to aid…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
The Mantis case features an open frame housing for better cooling of the LEDs. Its swivel base will help you position it on a Pi case, wall or other surface where you can either apply doublesided tape or screws. For assembly material…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
So if you're a user of Heges or a 3D scanner that uses the TrueDepth camera you must hate how you have to hold the iPad towards the subject and not even being able to see it, well this will fix that issue, just place a 2.5mm mirror on the…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple generic rectangular bracket (OpenSCAD customizable) . I use it to mount a Govee WiFi LED TV Backlight camera on top of a LG OLED TV which is much too thin to mount the camera as originally intended. The scad file can easily be…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Solarigraphy camera with water drain. assembly wideo by my brother: You need photopapier 10cm/15cm.
Wydruk około 17,50 €–21,39 € nettoWstępna wycena jednego wariantu
Case to build AllSky camera using UnderWaterDome…
Wydruk około 2,74 €–3,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple camera mount for Voron no supports needed Necessary screws: 3x M3x8 1x M3x20 2x M3 hammer nut
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
simple camera TAPO C110 holder for Prusa mini+
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Based on wbphelps ' great design. You can now mount your SimpliSafe using GoPro style arms. This easily increases the range of motion for mounting. Uses normal M5 GoPro mounting hardware. I assembled with modular arms . Also, included is…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Started as Pan/tilt camera holder, this Dual Raspberry GS/HQ camera holder/mount (for Pi5) turned out to be good enough for tripod mount, without originally planned external holder. Use with two GS cameras (Global Shutter) is only…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Raspberry Pi HQ camera back cover as small as possible. Model is created as the minimal solution to protect parts at the back of camera PCB from accidental contact with conductive materials. The body footprint matches PCB outline and it…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
If you have a Eufy E21 baby monitor camera and place it on a flat surface, you'll find the camera can't look all the way down. The camera can pan all the way up at the ceiling, which means you're wasting most of it's range of motion by…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
This is a Z axis camera mount for the KP3S 3.0. This uses the low cost HBV-W202012HD camera module. Printer: KP3S 3.0 Filament: PLA Infill: 15% hexagonal Nozzle: 0.4mm Layer Height: 0.2mm Supports: organic, only touching build plate…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
I made a camera with detachable lens, battery and memory card for theater/shows If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
VeloLock – Quick Release Camera & Accessory System VeloLock is a compact, high-speed quick-release mounting ecosystem designed for cameras, field monitors, microphones, LED lights, rig accessories,... . VeloLock was specifically designed…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Import of https://www.thingiverse.com/thing:4540545 by mikelane76 . Simple print and case that works perfectly for the purpose. Had to take a little bit of the PCB off the side of the camera from where it would've been attached to an…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a mount for a Logitech camera utilizing the empty 3mm screw hole on the X-Axis motor. Once complete you'll need a 3mm x 35mm screw to mount the camera (C170 shown in pictures) and a 3mm x 8mm screw or 3mm x 10mm to mount to the…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Compact camera mount with screw for UNC 1/4". This fits all cameras with UNC 1/4" thread like Logitech C920, Lenovo 500 FHD or similar. Dimensions holder: Width 155.12 mm height 65,00 mm Depth 51,66 mm Dimensions screw: Diameter 25.00 mm…
Wydruk około 2,95 €–3,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
NOT YET FLIGHT-TESTED. 6mm thick, and solid. Compared with Lapjoint's ironically one-piece model, this lap-jointed model is 80% thicker. Because I like my boomerangs stiff and not too light. I added four two-dime pockets and some…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
I wanted to mount my camera to the wooden table where I have my MK3S+ printer. This arm is about 3" offset (diagonally) and 4" up from the table surface. I printed with some supports so the arm wouldn't vibrate, fall or droop down.
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
The M2.5 screws now screw directly into the mount/adapter. Be careful about how many times you attach and detach the camera from the mount/adapter. It's not designed for that. Attaching it once should suffice. After that, you risk…
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
UPDATE : just made a new version with other adjustments. Now the cam is a little more in a back position than before. _________________________________ Hi all, I couldn't find a proper Pi camera mount with a real nozzle view so i made one…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compatible with: HBV W202012HD camera module, e.g. https://amzn.eu/d/00Wpr6v 3D printer cover that uses 16mm diameter bars, e.g. https://amzn.eu/d/2MNf74S Printed with 1.75mm PLA, 0.4mm nozzle, 0.15mm layer hight at 150mm/s. I uploaded a…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
4" Siding Mount for 2 Ubiquiti G4 Bullet or G5 Pro Cameras and others that use the same mount. Big thanks to user PHOENlX for providing mount on Thingiverse. https://www.thingiverse.com/thing:4930947 Print Settings Printer Brand: Prusa…
Wydruk około 10,64 €–13,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…
Wydruk około 5,54 €–6,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Caddx Peanut mount for Beta95Xv3. It is a strait replacement for the original SMO4K mount. If You're planning to carry a camera - you are since your searching for a mount for it - I would strongly advise to squish with screws that…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
