Wyniki wyszukiwania: mirrored

Sortowanie

131 modeli

P
Printablessamuel-t

[ REMIX ] Original Prusa Enclosure toolholder (LED stripe compatible, mirrored)

I have a sheet holder on the right side and the LED stripe installed. Thus, created this remix which mounts on an additional vertical screw and is mirrored for left use. This remix is inspired by the LED stripe solution provided in this…

Wydruk około 9,62 €–11,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
104
Polubienia
27
Ocena
5
P
PrintablesSaphir

Ford Fiesta Centre Drawer with phone holder - mirrored

A mirrored version of the Fiesta Drawer with phone holder by Jacques Strauss for all people having the steering wheel on the left side of the car. Photos 2 and 4 show the version printed with a 0,3mm layer height almost without post…

Pobrania
754
Polubienia
83
Ocena
4,67
P

Frieren's Mirrored Lotus Ring - Sousou no Frieren (Frieren: Beyond Journey's End) - MSLA Only

A mirrored lotus ring gifted to Frieren by Himmel while adventuring. This is for people who want extra props while cosplaying Frieren or Himmel. Print with Resin and an advance warning that this print will be very delicate. The inner…

Pobrania
683
Polubienia
88
Ocena
0
P
Printableskartbratoffel

MK3S+ Y-rod holder mirrored

The original MK3S+ Y-rod holder is quite impractical if you want to remove the rods from time to time for maintenance. This is a remix of the original .stl so the top can be taken off. On my printer I just replaced the front two holders…

Pobrania
677
Polubienia
107
Ocena
4,95
P

Fern's Mirrored Lotus Bracelet - Sousou no Frieren (Frieren: Beyond Journey's End) - MSLA Only

Fern's birthday present from Stark while the party is travelling. The mirrored lotus design is traditionally given to one's sweetheart…not that Stark knew of this at the time. This is for people who want extra props while cosplaying Fern…

Pobrania
416
Polubienia
97
Ocena
5
P
Printablesrobertoamd

Elegoo Neptune 4 Pro extruder 90deg with chain female mirrored

Neptune 4 Pro extruder 90deg with chain female mirrored to connect your Extruder with the chain. Infill 100% No suppor

Pobrania
373
Polubienia
33
Ocena
5
P
PrintablesRipStever

Stackable Shelf Organizer - Drawer System - Mirrored

You'll need to go to the original storage system for the actual drawers. Find the original storage system here: https://www.printables.com/model/988687-stackable-shelf-organizer-drawer-system Find the Stackable Shelf Organizer here:…

Pobrania
238
Polubienia
38
Ocena
5
P
PrintablesTheMasonX

Poseable Warrior Bug - Mirrored Parts

I mirrored all the parts and saved them to separate files for easier printing. I recommend using the supportless versions and using generated supports instead. I'd like to create my own custom supports for the body sometime, but that's a…

Pobrania
232
Polubienia
50
Ocena
5
P
Printablesscmanjarrez

Long PCIe bracket Nvidia P620 (mirrored)

Bracked mirrored. Remix from https://www.thingiverse.com/thing:4943241 Category: Electronics

Pobrania
205
Polubienia
13
Ocena
5
P
PrintablesOsprey

Scout Sign (separate pedestal & mirrored)

This is a remix of the beautiful design by jreimers ( https://www.thingiverse.com/thing:2927535 ) and it addresses two issues: The original design portrayed a left hand. Scouts do their this gesture with the right hand (although they…

Pobrania
173
Polubienia
23
Ocena
0

LowRider 3 CNC - control box case for Raspberry Pi 4b, BTT SKR Pro 1.2 board, and BTT TFT35 E3 touchscreen (v1.3.6) MIRRORED!

This remix was commissioned by a fellow V1E maker, Deadlystrike (username on Printables). Also, this listing's lid got remixed without the hold on top for TFT, as requested by a fellow V1E maker, @Mike_2205479 :…

Pobrania
172
Polubienia
32
Ocena
5
P
Printablesewwbananas

Flying Propeller - Pull Rotor Copter and Props Mirrored Original Handle and Props for more natural operation

Everyone I handed this toy too loved it, but always instinctively started operating it backwards, despite the arrow. It felt unnatural to insert the pull rod across the left hand, on the left hand side of the gear. I mirrored the design,…

Pobrania
165
Polubienia
13
Ocena
5
P
PrintablesSomeone26

Nintendo Switch Cartridge Carousel (Mirrored)

Original Model by: @FafCerebrate_270347 A switch cart holder that as you spin it, the games will pop up to make it easier to read and pull them out. I recommend printing the base in 0.12 layer height so that the ramp is as smooth as…

Pobrania
155
Polubienia
15
Ocena
0
P
PrintablesBilly695

Left handed (mirrored) OTF Fidget Knife

I found it awkward to use the knife in my left hand, as the springs doesn't work correctly when you touch them. It is based on the "negative hook for better catch - guided" files. Basically just mirrored everything except for the makers…

Pobrania
145
Polubienia
7
Ocena
0
P

Stokke Tripp Trapp adapter 75mm mirrored

Mirror version so it fits on the left side.

Pobrania
137
Polubienia
4
Ocena
0
P
PrintablesWavz3D

Sovol SV04 Cable Manager w/ Mirrored Model

Poor cable management can lead to print issues quickly so fix it with these. Easy to print and you can just zip tie on!

Pobrania
136
Polubienia
14
Ocena
0
P
Printablescobre

Mirrored Ender 3 (Pro/V2) Rail Mounted Webcam Stand

This is MLampe's camera mount but mirrored so it fits better on the right side of the printer. With the original, I was having issues with the X carriage/my 5015 fan hitting the camera, so I mirrored it.

Pobrania
127
Polubienia
13
Ocena
5
P
PrintablesAyeeAyeeRon

Tool Cup for AD5X (Word Removed & Mirrored)

This is a remixed version of the "TOOL CUP FOR AD5X" designed for enhanced mounting flexibility and a cleaner aesthetic. This holder mounts directly onto the base of the spool holders, providing a convenient and accessible spot to keep…

Pobrania
124
Polubienia
25
Ocena
0
P
PrintablesAnthony S

Mirrored mount and exposed ports for "Mountable ESP32 Screen (CYD) case with pen holder"

Remix with gaps for all ports and a mirrored mounting plate option. See original model https://www.printables.com/model/705053-mountable-esp32-screen-cyd-case-with-pen-holder for instructions. All credit to @Sijeveenstra_996957 for the…

Pobrania
122
Polubienia
12
Ocena
0

Indian Logo (mirrored)

Indian Logo with a mirrored version.

Pobrania
121
Polubienia
6
Ocena
5
P
PrintablesMilan

Mirrored numbers (Gallery goodies for your Prusa Slicer by Startrekfan2 Remix)

I often use Startrkfan2's numbers to mark my design iterations. Since i usually mark my models on the bottom layer i always needed to mirror the glyphs and reduce the height to 0.4mm (that way it's at least two layer high at my most…

Pobrania
95
Polubienia
16
Ocena
0
P
Printablesfraggy

ESP-12F Relay X8 - Case mirrored

This is a remix of the model on Thingiverse from JooztNL and a modification by @DirkHoefle (THX to both) This model combines the base with the closed design and the lettering on the top is rotated 180°. The original design has slight…

Pobrania
92
Polubienia
2
Ocena
0
P
PrintablesArt3Design

Mirrored Modern spiral planter

Mirrored Modern spiral planter

Pobrania
92
Polubienia
24
Ocena
0
P
PrintablesTyler Wilber

Battery Daddy Clip Mirrored

I moved the "arm" to the opposite side. The original is a left side clip and this one is a right side clip

Pobrania
88
Polubienia
6
Ocena
5
P
PrintablesZen3Dlab

Mirrored Einsy Case for Prusa Mk3 (with heatsink window)

My model was made four years ago, which I brought over from thingiverse. I don't know why Einsy's box opens inside. This makes it very difficult to access the wires. I flipped the original box and tweaked it slightly to cover more at the…

Pobrania
88
Polubienia
20
Ocena
0

LowRider v3 CNC Fenders for various stock & tall YZ Plates, mirrored LR3s, & combined with Hidden Belts Mod! v1.0

This short video explains things fairly well: Peter H's amazing design of “fenders” for the LowRider v3 … now remixed by both Peter and myself to fit various tall YZ Plates, as well as stock plates and tall YZ plates combined with my…

Pobrania
84
Polubienia
16
Ocena
0
P
PrintablesPackratMakes

Mirrored Recreator 3D Gear Bracket (For Ender 3 V2)

Due to having to change the right case to fit the shorter wires, a mirrored bracket made the model look better.

Pobrania
81
Polubienia
14
Ocena
0
P
PrintablesRené Erler

Anycubic Chiron Direct Drive conversion (BMG Mirrored, SKR V1.4 Turbo)

Update 18/07/2024 Added remixed bracket for attaching the cable chain and filament sensor I now use a reverse bowden to the printhead and a feedtube from the filament to the sensor They are both attached using PC4-M6 pneumatic fittings…

Pobrania
78
Polubienia
14
Ocena
0
P
PrintablesReepime

Top Mount Spool holder Kobra 2 and 2 Pro - Mirrored

Top Mount Spool Holder for Kobra 2 and 2 Pro - Mirrored

Pobrania
77
Polubienia
10
Ocena
0
P
PrintablesSebB

Original Prusa Enclosure MK4 Mülleimer / Garbage can - Mirrored Left side

Trashcan Mirrored for the left side. Gespiegelt für die Linke Seite. No need for Support.

Pobrania
76
Polubienia
9
Ocena
5

Ball of Mirrored Dodecahedra

The Ball of Mirrored Dodecahedra was created by combining mirrored dodecahedra into a rounded, intricate shape. Its interlocking facets make it visually striking, and offer a hands-on example for math enthusiasts exploring complex…

Pobrania
72
Polubienia
18
Ocena
0
P
Printablesbakatrouble

Mirrored EBB36 PG7 Mount behind NEMA14 stepper

Mirrored version of @RedWish's EBB36 PG7 Mount behind NEMA14 stepper

Pobrania
72
Polubienia
8
Ocena
0
P
Printables3D LEE

MIRRORED 3D models for Cities: Skylines - The Board game

REMIX of https://www.thingiverse.com/thing:4677192 I remixed the tiles that needed a mirror image. 3D models for Cities: Skylines - The Board game https://boardgamegeek.com/boardgame/267370/cities-skylines-board-game Board game published…

Pobrania
71
Polubienia
10
Ocena
0
P
PrintablesBRS-ENGINEERING

Vcore 3.1 Stock rear block mirrored

Allow the correct X-X1 and Y-Y1 belts routing for the BRS-AWD drives upgrade

Pobrania
71
Polubienia
7
Ocena
0
P
PrintablesMB

Stealthburner for Orbiter 2.0 Mirrored

This is a mod to mount mirrored orbiter 2.0 to Stealthburner but not it is not tested. If you make one please comment so others can see if there's anything that needs to be modified

Pobrania
71
Polubienia
10
Ocena
0
P
PrintablesCorey Thomas

Yoto (mini) +Card holder (Mirrored)

Perfect for siblings or multiple Yoto's in the house and you need easily identifiable holders.

Pobrania
69
Polubienia
8
Ocena
0
P
PrintablesRasmus A

Pinecil insert with large bottom for large cable with mirrored pinecil stand

Pinecil insert with large bottom for large cable with mirrored Pinecil stand for the Rugged Multipart Pinecil case. I want to keep the case pointing away from the workspace so I mirrored the pinecil stand.

Pobrania
66
Polubienia
12
Ocena
5
P
PrintablesStarBug_Props

OT style Nite Owl Mirrored Ear Helmet

Night Owl Style OT mando helmet Untested. Category: 3D Printing

Pobrania
65
Polubienia
14
Ocena
0
P
Printableslvisintini

Mirrored Gaslands Veer Right and Swerve Right 32mm Moving Templates

I liked the template design by Flashhawk (https://www.printables.com/model/160874-gaslands-32mm-width-moving-templates). This remix mirrors the templates for swerve and veer to handle left veers and left swerves. The original design is…

Pobrania
65
Polubienia
11
Ocena
0
P
PrintablesFelixTeutsch

Everydays 021 – Mirrored Spiral Christmas Ornament

Today’s print is a variant of yesterday’s ornament , featuring the same open spiral pattern but mirrored for a fresh visual twist. The result is a subtle but elegant variation that pairs beautifully with the previous design, especially…

Pobrania
56
Polubienia
20
Ocena
0

Ender3 neo mirrored fan duct for dual fan

Mirrored fan duct for the dual fan mod. https://www.printables.com/model/601263-ender-3-neo-dual-fan

Pobrania
56
Polubienia
10
Ocena
5
P
PrintablesDangc10

MK4 Y rod holder mirrored - openable quick release

I would print it with the same parameters as the mk4 parts: Print settings: 0.20mm QUALITY Filament: PETG (tested on Prusament) 15% Grid infill You will also need for each holder: M3 x 10 screw - 1 piece Square nut M3nS - 1 piece

Pobrania
55
Polubienia
11
Ocena
4,33
P
PrintablesSteedMaker

Double Helix Mirrored

An artistic sculpture resembling a double helix could be a shelf sculpture, trophy, or award. This model was NOT created with any use of AI. Note: Nov 2024 - redid the entire thing - fixed geometry problem - with an FDM printer, print the…

Pobrania
54
Polubienia
11
Ocena
0
P
PrintablesMartina

Deburring Toolbox for Meistergriff - Mirrored

This box fits the deburring tool from Meistergriff: https://www.amazon.de/MEISTERGRIFF-Entgrater-inkl-11-Klingen/dp/B093PQXJCS/ Printer: Prusa MK4 Filament: Bottom in Prusament PETG Galaxy Black, Top in Prusament PETG Mango Yellow

Pobrania
52
Polubienia
11
Ocena
5
P
PrintablesEugeneGTI

Thicker top for MK3S+ Y-rod holder mirrored

Thicker top for MK3S+ Y-rod holder mirrored. I made it to be able to print it with 0.6mm nozzle.

Pobrania
51
Polubienia
9
Ocena
5
P
Printablesrinkel

Prusa Mini Bear Mirrored Mk3 extruder, Rev 6

Just a mirrored version of the Mk3 extruder, but revision 6 I could not find one on printables so I grabbed the files from the original Mk3 extruder and mirrored them, so you don't have to. I also included a reversed filament lever…

Pobrania
51
Polubienia
7
Ocena
0
P
PrintablesRosePeach

Pixel Watch 2 Charger Stand - Mirrored

If you use the crown on the left side of the device. Then, the text will be upside down on all other charger designs which rely on the crown being on the right side. This is a simple remix with the model being mirrored.

Pobrania
51
Polubienia
2
Ocena
0
P
Printables3DPrintDemon

PSU Stabiliser Bit Shorter Mirrored

same as original but made it a bit shorter & mirrored

Pobrania
48
Polubienia
8
Ocena
0
P
PrintablesMTWiley

Mirrored Rear Leg with Cable Pass-Through for Prusa Lack Enclosure

Remix of the back right leg(Mirrored). This model replaces the bottom back left leg of the enclosure and allows you to run your cables straight back and out through the rear left leg. Additional Related Models: Cable Holder/Bushing for…

Pobrania
47
Polubienia
6
Ocena
5
P
PrintablesMaks3D

HALLOWEEN COBWEB SHELF BRACKET / SUPPORT, PRINT IN PLACE WITH MIRRORED SIDE

I have designed the screw holes to fit a M3 woodscrew. The bracket/support is 100mm in length on both axis. Feel free to scale up for larger brackets! Happy Halloween (soon!)

Pobrania
46
Polubienia
28
Ocena
0
P
PrintablesTiago Jesus

Mirrored UFS-068 Parts Tray with Funnel

Just a mirrored version of the original. I hope you like the model! If you want to support my work you can Buy me a Beer !

Pobrania
44
Polubienia
7
Ocena
0
P
PrintablesManMan

Benchy But For Left Handed People (MIRRORED)

Benchy but flipped for left handed people (JOKE)

Pobrania
43
Polubienia
4
Ocena
0
P
PrintablesTodd D

Wyze Cam Prusa Mount - mirrored for left size

Simple flip of the model https://www.prusaprinters.org/prints/31452-wyze-cam-prusa-mount-with-slide-in-connector so it works on the left side of the printer rather than the right. Print instructions printed with supports. 20% infill. 4…

Pobrania
43
Polubienia
4
Ocena
0

Mirrored 4 inch Sam's Gear

A mirrored version of the 4 inch spiral gear included with Sam's Gears, so that the spiral goes the opposite direction. Print instructions Category: Mechanical Toys Instructions Print and use with Sam's Gears!…

Pobrania
41
Polubienia
3
Ocena
0
P
Printablessearch75TH

Voron M4 Extruder Mirrored (Ender 3

For ender users use “Motor_PlateMirror_Ender_3” instead of “VORON_M4_Assembly parts - Motor Plate mirror” Manuals are from VORON Design

Pobrania
39
Polubienia
14
Ocena
0
P
PrintablesOrdo273

AR's cable chain mirrored 20mm end

Really liked the size and makup of aroo 's chainlinks for the Ender-3. But I needed them to be miroored along the z-Axis to be mounted 90° rotated and open to the same side, so I tried my best to remix his design.

Pobrania
39
Polubienia
6
Ocena
0
P
PrintablesHitLuca

Mirrored SlideSwipe dock with adjustable top extrusion mount (hex-zero friendly)

After installing the manta ray bed from hex-zero, I noticed that my slideswipe dock that attaches to the y extrusion won't fit anymore. To combat this issue I mirrored the entire assembly to allow mounting it towards the back of the…

Pobrania
39
Polubienia
11
Ocena
0
P
PrintablesSergej

Tesla P4 Fan Shroud mirrored fan mount

Mirrored it to offset the fan to the opposite side to fit my dell 7050. Uses 40mm fans, for fan grill lock at original.

Pobrania
38
Polubienia
4
Ocena
0
P
Printablesbassamanator

Slimline Sliding Micro SD Card Mirrored

All holders mirrored so that the 'pins' of the SD cards are not exposed.

Pobrania
35
Polubienia
4
Ocena
0
P
Printablesapo-mart

Maximally constrained Z-belt covers - Mirrored

This model is a remix of "Maximally constrained Z-belt covers" (which is also a remix). It is just a mirrored model (for using it on the front-right & rear-left belts), in which the Voron logo appears with the right orientation instead of…

Pobrania
34
Polubienia
4
Ocena
0
P
PrintablesPecorino

Canon LP-E6 double battery holder - Mirrored

Now with MIRRORED orientation so the contacts of the battery are covered. See description.

Pobrania
34
Polubienia
2
Ocena
0
P
PrintablesGreg_The_Maker

Kodama Trinus E3D Mirrored Aero Titan Upgrade

Upgrade you Trinus with E3D's Mirrored Titan Aero ! Use the complete range of E3D Heater Blocks & Nozzles | http://e3d-online.com/ Print with your favourite thermoplastic | http://e3d-online.com/All-Filament You'll need to replace the…

Pobrania
31
Polubienia
2
Ocena
0
P
Printablesrunarsand

Rack Shelf for CRS305-1G-4S+IN (Shortened and mirrored

Rack Shelf for CRS305-1G-4S+IN but shortened to save fillament, and mirrored to show the status lights better.

Pobrania
30
Polubienia
1
Ocena
0
P
PrintablesMikeFlier

Mirrored stand with new legs

Needed the phone charger on the other side due to where I sleep on the bed. Decided to remix the legs while I was at it. Uses 2 screw and I added little rubber cupboard door bumpers to the legs for traction. Requires: 2ea M4x12mm screws.

Pobrania
30
Polubienia
2
Ocena
4
P
PrintablesFuseFusion

Lötspitzenreiniger / Tip cleaner für/for Weller gespiegelt/mirrored

This is a mirrored version from the model from @m3_mantimaker_420166 model.

Pobrania
30
Polubienia
1
Ocena
0
P
Printableshendr1x

Dewalt 12V & 20V Impact Driver triple bit holder mirrored

Mirror version so fit on other side of impact properly. All credit goes towards Ira S for the great model.

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesEthan Bayer

Creality Ender 3 Light Bar Brackets - Normal & Mirrored

This is a 3D model of the side brackets found on the official Creality Ender 3 light bar upgrade kit. I designed this for three reasons: The original plastic mounts are prone to cracking, especially under tight screw tension. The original…

Pobrania
28
Polubienia
9
Ocena
5
P
Printableshackoholic

Firewall for Swappable Power pod (mirrored)

A simple, mirrored version of the original Firewall provided by Flitetest for people who don't know how or don't want to mirror the original STL in their slicer, Fusion 360 etc. Basically allows the wiring to come through on the opposite…

Pobrania
27
Polubienia
1
Ocena
0
P
PrintablesRealTime3392

Turing Pi 2 fan shroud 10x40mm (mirrored)

A 10mm deep 40mm case fan to cool two slots on the TPi2 cluster board, for the non-micro SD side of the CM4 adapters.

Pobrania
27
Polubienia
5
Ocena
0
P
PrintablesPeter Farell

Mirrored Buddha Head

Mirrored Buddha head. Scan from wooden statue

Pobrania
26
Polubienia
8
Ocena
0
P

T-Rex Skull Earring Charm — Mirrored Pair

A detailed Tyrannosaurus rex skull, shrunk down to an earring charm with a jump-ring loop fused onto the top of the cranium above the centre of mass, so the skull hangs level with its profile facing forward. Ships as a mirrored pair so…

Pobrania
26
Polubienia
7
Ocena
0
P
PrintablesLuke2123

Prusa Enclosure Mirrored (Right Side) Filament Guide

Right side filament guide for the Official Prusa Enclosure. Simply mirrored the existing parts in Fusion360 - nothing fancy!

Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesRobert Brownell

(MIRRORED) Neptune 4 Logitech C920/C922 mount

My extruder crashes into the original model, so I mirrored it so the bracket holds the camera far enough away from the build zone to avoid said crashing. Nothin' crazy here. Hang the webcam upside down, zip-tie it so it doesn't unfold,…

Pobrania
24
Polubienia
3
Ocena
0
P
Printablesturbogoof

Shark Rocket Wall Mount (Mirrored)

Took Andrew's design for the Shark Rocket wall mount and mirrored it to better suit my mounting location

Pobrania
23
Polubienia
4
Ocena
0
P
Printablesewwbananas

6 Blade Best Sounding Propeller Mirrored - For a mirrored handle Copter ONLY

This prop wont break any flight time records, but it sure sounds AMAZING! This will only work with the mirrored handle print. Thanks to the original designer for this!

Pobrania
23
Polubienia
3
Ocena
0
P
PrintablesIkkou

Elegoo Centauri Carbon Purge Bin- No support, mirrored + extended

I needed a poop bucket that I could access from the left side, so I slightly modified this model. The screw mount doesn't align with anything correctly anymore, but I didn't need it to anyway, I glued it to the housing with some…

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesPiercet

MendelMax 1.5+ Y-axis Internal Motor Mount Mirrored so it fits on other side of the rail

The internal Y rail mount by MishaT is great, but if you have a Lulzbot AO-10x series, the existing wiring for the motor is too short to run the motor on that side of the rail. So, this is simply a mirrored version. I claim no rights to…

Pobrania
22
Polubienia
1
Ocena
0

REMIX (lid solid, no TFT mount hole) of LowRider 3 CNC - control box case for Raspberry Pi 4b, BTT SKR Pro 1.2 board, and BTT TFT35 E3 touchscreen (v1.3.6) MIRRORED!

As requested by @Mike_2205479 REMIX (lid solid, no TFT mount hole) of LowRider 3 CNC - control box case for Raspberry Pi 4b, BTT SKR Pro 1.2 board, and BTT TFT35 E3 touchscreen (v1.3.6) MIRRORED! Please note this is the mirrored version.…

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesMCDELTAT

Mirrored Solder Fume Extractor w/ Dual Filters

THIS IS A WORK AND PROGRESS, FURTHER DOCUMENTATION WILL FOLLOW NEXT STEPS: 1. Find a new off-the-shelf potentiometer or design my own PCB to handle it. Background: I was quite impressed with the usability of the solder fume extractor by…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesMolemanTux

Sherpa Micro Romz Remix MIRRORED

I needed a mirrored extruder for my redesigned printhead of the Kingroon KLP1 210. So, once found the Sherpa micro, i mirrored. Also, the arm used to break when installing the gear, so decided to modified to make it stronger and easy to…

Pobrania
18
Polubienia
2
Ocena
0
P
Printablesjglerner

Camera Mount for Logitech C270 Mirrored (Tevo Tornado and alike)

Basically the same "Camera mount for Logitech C270 webcam by jclarkhughes published Jan 30, 2017". Just used a mirrored STL file. I just needed the camera on the opposite side, looking left on the right side of my Tevo Tornado because my…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesR Hen

Mirrored Knee

Mirrored the "knee" for stability

Pobrania
16
Polubienia
3
Ocena
0
P
PrintablesSaboral

Ender 3 Pro Nozzle Wipe Attachment: Mirrored Version of Legend's Design

Remixed version of Legend's Ender 3 Nozzle Wipe Attachment. Also modified so the brush should only protrude about 2mm above the build plate to minimize issues with nozzle offsets to probes during bed leveling and meshing. Print with PETG…

Pobrania
16
Polubienia
3
Ocena
0
P

Qidi Plus 4 Safer Chamber Heater Mirrored Version

A mirrored version of my safer chamber heater, fan fits correctly. Allows side by side stacking. Perfect for DIY printer projects. Created per community request. Fully remapped back cover plate, half the original size. Printed with…

Pobrania
16
Polubienia
5
Ocena
0
P
PrintablesSteedMaker

Mirrored Optical Illusion

A simple design that is an optical illusion. Do you see a "W", "heart" or a "S"? Designed to print without supports. Please "like" this file if you collect or download it. Category: Sculptures

Pobrania
16
Polubienia
3
Ocena
0
P
Printablesavolkov

Mirrored PSU-COVER-24V360W

I find it easier to mount board on the other side of the axis that has X-axis motor – that gives more options for modding, so I designed holder for the PSU I have to be on the other side of the printer. Mirrored PSU cover for 24v 360W…

Pobrania
16
Polubienia
2
Ocena
0
P
Printablessimi_mini2020

PipBoy 2000 Mini mirrored

hole = 21,5mm and it is tall 25mm

Pobrania
15
Polubienia
2
Ocena
0
P
Printablesspengineer

Wanhao Duplicator Plus Titan Aero Mirrored Mount

V2! (V1 is still included as Mirror_Carriage_2) This is a mount for the Titan Aero extruder/hotend that fits the Plus. The mount can work with either the original motor or a small 26mm pancake stepper like this one. (Though you will lose…

Pobrania
15
Polubienia
4
Ocena
0
P
PrintablesMoe Lundy

Mirrored 3000mah Backplate

I mirrored the 3000mah backplate so it would fit in the case.

Pobrania
15
Polubienia
1
Ocena
0
P
Printableshelja.dankill

Every Day Dice Carry - Symmetric mirrored version of "Insert_RectHex"

Many thanks to @wuerfel for the original model!

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesXSImnl

Mirrored PSU holder

Simple mirrowed PSU Holder, for my Fake PSU Electronics Housing

Pobrania
14
Polubienia
2
Ocena
0
P
Printablesknartz

Replacement for Hager FZ44N left (or right if mirrored)

printed it in PTEG on Bambu P1S with 0.20/strength profile with PTEG support there are several parts. the side without and with cutout for the tiny cable canal with 90° angle which fits to a bigger canal on top of the big Hager piece

Pobrania
14
Polubienia
1
Ocena
0
P
Printablesnexgendigital
Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesJulia Rose

Flowsnake Fractal Puzzle Remix, Non-hollow pieces and mirrored border

I love the original make but ran into a few issues while printing it that frankly baffled me. First is the hollow pieces. After following the provided instructions with no infill for a test piece I decided to try printing with infill.…

Pobrania
13
Polubienia
5
Ocena
0
P
PrintablesLascius3D

Duender Front mounts for 4040 Extrusions (Mirrored Remix)

Duender Front mounts for 4040 Extrusions (Mirrored Remix). My Linear Rails are on the outside of the 4040 Extrusion so i mirrored the original stl to accommodate for this.

Pobrania
13
Polubienia
7
Ocena
0
P
PrintablesHot_Dog_Head-

Mirrored Illusion Charm from DBD

"Just... stay there... perfect!" — Baermar Category: 3D Printing

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesSnowHead

Silicone Sock for Mk10 Hotends mirrored and without Slots

For my FF Dreamer I needed a sock for the right and a sock for the left hotend which are mirrored. The wedged slots in the socks were not needed for my hotends. So I made a remix without the slots and with a mirrored version. The original…

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesAdamski

IKEA Skadis Pegboard - Paint Bottle Holder 32.6mm short version mirrored fix

This is a remix of the mirrored Paint Bottle Holder 32.6mm short version by DeGnoss The mirrored versions of the bottom parts were missing the ridge where the top part can slot in. For now I only fixed the 3x2 mirrored bottom model. Image…

Pobrania
12
Polubienia
2
Ocena
0