Liczymy pasujące modele…
Motivation I've got several requests to adapt my design of the clip for the larger 45/65l boxes ( Never lost Ikea Samla Clip (45l + 65l) ) to the smaller boxes 5l/11l/22l. So far I didn't use the smaller boxes as dry boxes and until…
With this upgrade you can keep your filaments dry and organized in a very small footprint. You do not need anymore the filament buffer. These designs should be compatible with all 200 mm Spools which has a round (Das Filament type) or…
Having a variety of Samla Clips I decided to label them with the matching box volumes. Also extended/shortened all clips to 3cm width - Make sure you use the correct print orentation to avoid overhangs - Remixes of the following models…
For the Samla boxes from IKEA clips that have a different Fit dependend on how you would like it ;-) Best configuration to print is like shown in the 3mf file. I printed in PETG.
This model went thru several iterations to offer a perfect fit, a print without support, a fast printing time and a fit that allows easily installing the clips and stacking the boxes. You may also place the clip over the reinforcers…
Stable box for the desiccant which goes under the spoolholders of the ikea drybox (Samla, 22L). https://www.printables.com/de/model/98008-drybox-for-4-spools-ikea-samla-22l-based/files
The way you can store your filaments in the Ikea Samla boxes is great. But then you need an cupboard to place all your Samla boxes in. And I did not want that. So I created two holders that combined can hold a full Samla box. I have…
EN: Grid for plant propagation box. Samla from Ikea is used as the box, size 11 l. The grid is placed at the bottom of the box and separates the plants, or their pots, above the water surface. The water under the plants serves to increase…
Update 05/23/2024: Now that Frantisek23 has further perfected his design , I definitely recommend his new solution and basically declare my remix obsolete. Since the EndRib_V1b Mini.stl model is no longer available from him in the course…
The popular introductory level mycology guide found at r/unclebens recommends using Ikea Samla 4 qt boxes and lids for spawning mycelium to bulk. During the fruiting stage, the lid is flipped and adjusted for airflow. These clips snap…
The container was designed for roughly 200g of silica gel (half of the container is empty). A 22 litre IKEA Samla box can easily fit two containers. All dimensions are configurable. Extra parts: 4x DIN 912 M3x8 screw 4x 5x5 M3 threaded…
Diese beiden Anschläge werden magnetisch am Fest- und Loslager der Z-Achse der Volksfräse VF1 hinter der Spindelplatte montiert. Sie schränken das Spiel der Kugelumlaufmutter nach oben und unten genau um die Längen ein, dass die…
This is a lid made for the Drybox silica tray made by Harabi. It's all based on ThomasS spool holder for the 22 L IKEA SAMLA. The cutouts are 2,5mm so ideal for silica with a diameter > 3mm
Remixed version of the original, 2 cm higher to accommodate more space for silica gel pearls at the bottom of the box. Watch my video about the new version here: As a cheap dry storage box for filament, IKEA Samla boxes (57x39x28 cm) are…
There are numerous designs out there of clips that secure the lid on IKEA Samla (Filament storage) boxes. But I could not find any that really presses the slightly overhanging lid onto the box to keep it as air tight as possible without a…
Edit: I also tried a different approach here: Let's build...Drybox v2! by Ren | Download free STL model | Printables.com You can find many single parts, videos or blog posts regarding dryboxes. When I realized I have stringing problems…
This is an adapter for the Snapmaker U1 to use an IKEA Samla 45L box or a Walmart Sterlite 55L/58qt box as a top cover. It is meant to be a simple but very functional design. You can slide your box back for ventilation. No need to remove…
Summary Are you tired of searching your clips for your airtight Samla box once opened? You like the simplicity of print-in-place parts? Then this Samla clip is for you. The only thing you need are some drops of glue to fix the clips.…
I love the gridfinity system started by Zack Freedman and the design idea of easy accessibility and of displaying the stuff that is stored, rather than store it away. With my Gridfinity Ikea Samla adapter (…
Summary Smart Dry Box designed for the Ikea Samla 45l box. It supports 6 spools, each buffered by a fully enclosed wheel buffer utilizing the complete box height. Spools, Buffers and Desiccant containers all can easily be loaded from the…
Purchased some 22L Samla from IKEA but they said that opposed to the 44 lits one, the 22L does not have lid fasteners. Well now it does since i thought it was a good addition to make a dry box for my filaments. Cheers. Print instructions…
NEW - now available for clip together baseplates If you want to save some filament on this print I added a version that uses my clip together baseplates https://www.printables.com/model/633086-gridfinity-clip-together-baseplates/files To…
Reupload of Beaver Works 's great work that he uploaded to MakerWorld The official Snapmaker top cover costs a whopping $249 ... and my wallet simply did not approve of that purchase. So, I had to take matters into my own hands and create…
Summary Another simple Clip for your 22l Samla Box with or without sealing. Just a satisfying “Click” and closed. Use a strip of double-sided adhesive tape (showcase on the pictures) and you are done with searching your Samla Clips. I…
I needed this great design from Canislupus for a 22l samla box, so I recreate a clean fusion 360 file based on his v1 for sharing and allowing easy further modifications. Two models are proposed 11-22l samla box clip v1 Tested with 11l…
This is a solution for a clip to lock the IKEA SAMLA 55/130l boxes. I did not find a solution for this box size as simply scaling a 22l clip does not provide a solution tightly closing the box. It creates a tight closing and is easy to…
IKEA Samla Clip for 45/65l Box. Printed in PLA Updated the files it is now a bit thicker because my Clips creeped quite a bit. Print instructions Printed in PLA 100%Infill
My version of the Samla filmant storage is a minimalist design which is simple and quick-and-easy to print. Check out on YouTube how to build it, BOM with links in the description: UPDATE: 19/12/2021 I have added a 3D printable quick…
Customizable inserts for the IKEA Samla boxes (5, 11 and 22 liters) Development here: https://github.com/Alex9779/IKEA-Samla-Inserts The repo might have some updates not yet posted here, so have a look there too! The models here are just…
Designed an IKEA SAMLA clasp, based on the original design. Works perfectly. Has a bigger lid for removing it more easily from the box. Print instructions Category: Containers Summary Designed an IKEA SAMLA clasp, based on the original…
This model went thru several iterations to offer a perfect fit, a print without support, a fast printing time and a fit that allows easily installing the clips and stacking the boxes. You may also place the clip over the reinforcers…
As a cheap dry storage box for filament, IKEA Samla boxes (57x39x28 cm) are used by many. Sadly, when using a short piece of pipe to hold filaments, changing just one without disturbing the other three is very hard. Each Samla box can…
About Remix of the silica gel box: Adjusted for better fit in IKEA Samla 22L box Samla 22L has a bottom size of 300mm x 216mm (measuring the largest usable rectangular surface) This box's dimensions are 146.4mm x 100mm This means you can…
I love the gridfinity system started by Zack Freedman and the design idea of easy accessibility and of displaying the stuff that is stored, rather than store it away. But I felt that until now an easy way of transporting more than a few…
The community has created some incredible, creative solutions for the Snapmaker U1 enclosure. However, most are quite bulky and require significant time and material. Born out of a need to finish a project with a nearly empty roll of…
This is an insert for the Ikea Samla 22L drybox to improve filament spool storage (not designed to print out of the box). The insert prevents the spools from rolling around and sitting directly in the desiccant (and therefore pulling…
I wanted the lid clips for IKEA Samla Boxes in different sizes. The fit is similar to the originals. I have currently only versions for the 5/11/22L & 45/65L sizes of the samla boxes. Please make sure to print the appropriat size for your…
NOW CUSTOMIZABLE: https://github.com/fidoriel/Mini-Tray You can modify this code to generate you size. You may create a PR. Update 26.01.2023: Today I have decided to make the OpenSCAD source public, because there were some requests for…
I wanted a simple storage solution for spare filament spools that utilizes the widely available IKEA Samla 22l Storage box with lid and keeps the filament dry during storage. To keep it as simple as possible, the spools can rest directly…
Several 3d printing filaments are hygroscopic, meaning they absorb moisture from the surroundings which can lead to poor surface finish and a clogged nozzle. Depending on where you live and what material you are printing with, moisture…
This is my first upload and also my first 3d modeling attempt. It is basically a bolt and nut couple with a small gasket. The bolt has a conical hole in the middle and is designed to perfectly fit standard 4mm PTFE tube (for 1.75mm…
My design of the Burj Al-Mamlaka/Kingdom Tower in Riyadh Saudi Arabia I designed it in Fusion 360 but didn't get everything accurate because I'm not so experienced in 3D design but it's better than the others and will be updating it…
A simetric clip for Samla box 5-11-22 L. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Doesn't Matter Resolution: 0.2 Notes: infill not nesesari. Only perimeters Category: Organization
This is a minimalist desk organizer designed to hold a smartphone and pens in one clean, compact form. Created in Autodesk Fusion 360 , the model focuses on simplicity, stability, and everyday usability. The angled phone slot provides…
Please give it a ❤️ if you like it 🥰 Dry Box DIY using an IKEA alternative to the Samla boxes Here is the video about it: Can be printed without supports and on an Ender 3 size bed (235* 235mm). You need to print : 2x drybox_base.stl 1x…
I was looking for clips to secure the lids on some of my IKEA Samla boxes and came across many, including this one by Canislupus . I really liked the idea of the design but there were a couple of things I wanted to change so I remodelled…
The standard SAMLA Hat by Beaverworks wasn't quite what I wanted so I made my own! This version sits flush (or as close as I could get it) with the top of the U1, It therefore also doesn't cover any of the sides. It also comes with half…
Here's my Spoolholder for Autorewind (THX for that greate THING ! https://www.thingiverse.com/thing:3252111 ) which fit into IKEA Samla Boxes. To store the Filament in dry and dust save condition. Included: 3-Spool-Version for a…
I love the gridfinity system started by Zack Freedman and the design idea of easy accessibility and of displaying the stuff that is stored, rather than store it away. But I felt that until now an easy way of transporting more than a few…
Remix of IKEA Samla Clip for 45/65l Box to fit to the 22l Box which is enough to store three to four 1kg rolls of filament. Redesigned it that it fits tight and can be assembled very easy and click on effect. I used eight of them and a…
I really appreciate the design from deweycat, but it does not fit the SAMLA box I wanted to use. This design also includes a stick to stack the trays without having to put them on top of the miniatures. It is high enough (more than 55mm)…
Hello, I have been using my Samla 22L - All-in-One - Compact Dryboxfor for more than a year. The operation is still problem-free. Now the time has come to add silica gel trays and small improvements. I incorporated the comments and here…
I use 3D printed clips for all my Samla boxes, and I loved this one: https://www.thingiverse.com/thing:2110134 Unfortunately, IKEA has redesigned the lids for the Samla boxes, making that clip useless :( Luckily, I have modified it to fit…
Tray system for IKEA SAMLA boxes (5l or 11l) as nursery of seeds or cuttings / cloning for hydroponic propagation. The nursery makes already use of the final pots meant for example for the hydroponic tower. It holds up to 6 of the…
Like many others, I store my filament spools in IKEA Samla boxes. This container is designed to be attached to the lid of such a box using strong double-sided sticky tape. It holds approximately 180g of silica gel. You can close it with…
Simple passthrough the drybox. You will need to drill a 10mm hole in the wall of the box. Screw the PC4 couplings onto the outer part. I probably don't need to explain anymore :) Material: PETG or PLA (but PETG is better) Layer: 0.2mm…
MMU2S Ikea Drybox made by Jindřich Beneš is great. But why only for MMU2 users.. I don't have one (yet) So I printed one and find some things I want to do better such as the bearing, they are relatively expensive to the whole printed…
Improved model published: https://www.printables.com/model/1089528-samla-silica-container-v3 I decided to use IKEA Samla boxes to store my filament. They are stackable an can keep 5 to 7 filament spools (depends on the spool width). But…
I needed to separate the fasteners in the 5l IKEA Samla box. I managed to get a 3D model of it, so modelling the partition was a matter of a few minutes. I modelled the partitions in two versions. If the partition is too tight in your…
IKEA samla clip lock for 45L/65L boxes. I didn't like the original design of the clip locks for samla boxes so I modified it slightly. Now it is flat on top and is easier to unlock.
I've created it to be as light and fast to print as I can make and to have as many openings as I can get (and still keep reasonable). Sory for poor printing quality on my pictures, I didn't care to make it look good just to get it fast,…
Needed an additional kitchen drawer, had a spare ikea Samla. 3D printing magic and poof, drawer. Printed in Prusament PETG. Holds my kitchen towels pretty well.
My own IKEA SAMLA 22L Box Filament Spoolholder for a 25mm Installationtube. It's printable without Support. UPDATE 17.02.2019: added a 3mf file for own modifications. Print instructions Category: 3D Printer Accessories Print Settings…
This is a modification of SAMLA HANGA by jan Grewe. It is a holder for a dry box solution using an IKEA 22L SAMLA box. The SAMLA HANGA by Jan Grewe ( https://www.thingiverse.com/jangrewe/ ) has a very nice design. But some weak points…
This model isn't just a building, it’s an entire landscape. It showcases the iconic elements that make Rivendell a sanctuary for the weary traveller. Gothic elegance and intricate spans.
Eldritch Horror has a lot of expansions, and unfortunately this means the inserts available for it usually offer solutions for either just the base game, or base game plus everything. I only have one large expansion (the best one, don't @…
I found the original https://www.prusaprinters.org/de/prints/14568-ikea-samla-22l-lid-fastener very helpful but printed it with support, because of the horizontal grip starting in the air. So the mod has two different grips you can print…
Cutted the existing model in less than half printed perfect wit 0.6 nozzle and 0.2 layer.
print settings: Material = PLA, ASA, ABS Perimeter = 4 or more Infill = 30% Clamp bearings as spare parts for bar tables with a tube diameter of 28mm. The bearings are constructed in two parts to achieve the greatest possible stability.…
This is a remix of several Ikea Samla drybox projects. Actually I liked the idea and like the 22l box size. What I did not like is that in most projects the bearing holders can cause friction on the bearing itself and the stands for the…
SAMLA Drybox housing Filamentalist Rewinders: Mounting for Filamentalist Rewinders inside of the SAMLA 22L Container as a Drybox. Filamentalist V3 added! (Pictures Pending) While testing V3 I found an issue that was always causing…
A 4-level insert set that fits snugly inside a 5-liter IKEA samla box. Each level is divided in two halves to make them printable seperately in smaller printers, and has a grid size of 4x3. There are 3 different sizes of small boxes, you…
A vase-mode, parametric version of the IKEA Samla bins! Print with a 0.8 or 1.0mm nozzle in vase mode. I suggest PETG or Polycarbonate. This model is parametric. You can modify it to create bigger or smaller ones using ONSHAPE or the Step…
Welcome, If you enjoyed my model, please consider supporting me by sharing your make and leaving a like. For information, filament tests, and much more, all about 3D printing, feel free to check out my homepage or join my Filament Deal…
I designed an angled mount for the Form4 resin printer so the excess resin can drip back into the tank and isn't lost in the washing station. There are two files for printing with filament and the hollowed version for the resin printer.…
Changelog: 2025-04-25 Added [XP1 Plug - Angled Print - Short Curved - Bolt in Lower Hole] Note this hasn't been tested yet Due to the Bolt, there has to be a big hole. The only way to make the big hole smaller is to make the plug protrude…
The original was too small for my big boxes but I liked the design so I made it a little bigger. The STL provided is the 'small' one, but I provided two gcode files, one with the normal/small version and one with the large version where I…
ikea samla clip (55L) very new design Clip for Ikea Samla Box all other clips are not so functional, so I designed a new one with Fusion 360 2 days, ca. 20 tests now I think it's really good only for 55L & 130L samla Print Settings…
This is the Samla Wall-hook for Samla 5l and 10l Boxes I Love the Samla Boxes, they are verry cheap and available in nearly all sizes. The most common size for me is the 5l Samla. After Printing all the nice Clips i would like to mount…
Ikea Samla Clip (slightly firmer hold) German: Wir haben einige SAMLA Boxen von IKEA mit dazugehörigen Deckeln bei uns zu Hause. Leider kann man die Verschlussclips dafür zurzeit nicht mehr bei IKEA kaufen. Daher habe ich eine…
Flat feet for IKEA SAMLA boxes (for furniture pads etc) Dimensions are for the 56x39x28cm/45l box Some adaptation may be needed to fit the other size boxes (see instructions at the bottom of the scad-file) Print Settings Printer Brand:…
Only print this once and use the other two from the original, otherwise they will not fit in the box. Remixed version of the Filament Spool Roller from Crosslink, made the base and the spool inserts 10mm larger so it can fit wider spools…
Tato figurka zachycuje ikonické trio mladých čarodějů — Harryho, Hermionu a Rona — v jejich typických rolích a postojích. Harry stojí sebejistě se svými brýlemi a jizvou, připraven čelit temným silám. Hermiona drží knihu, symbol jejího…
Tried to create a cheap alternative to the metabo and starmix models. The cyclone is placed on an IKEA SAMLAs lid (11/22l or 5l) while the corresponding box can be used to collect the dust. I even did connect two in series to improve…
After I decided to use IKEA Samla boxes (22L) to store my filament and created my own silica container , I saw some nice remixes, like this . So redesigned my silica container to improve some things: shorten the lower part to save…
Model created fits the ramlalla model. The model pins will slot into the recess provided https://www.printables.com/model/754703-ram-lalla-murti-3d-model plz download that model from above
>Version for 1 Spool< >Version for 2 Spools< Update 2024-03-31 -Added Hygrometer (Xiaomi Miija Bluetooth Thermometer) -Added spool clamps -Added my remix of PTFE endcap Update 2024-04-01 -Added a splitted in 2 parts version for smaller…
I designed these for the Wide version of the IKEA Samla Filament Roller with the original ones in mind, so it should fit with those as well (didn't test it though). Fits in the inside of the roller. Dimensions are: 75x198x25 mm There is a…
Use case This kit consists of a generic frame for 2D-printed or hand-written labels. It comes with gluing templates that fit exactly to IKEA Samla boxes (on the small side for 22 liter and 11 liter boxes and on the wider side for 5 liter…
We present a convenient solution for changing the silicia in a 22l SAMLA Box. It is called "TwinSilicia" uses about 200g of filament and can hold about 700g of dry silicia. Through this design of two big silicia containers, which are…
This is a super simple mesh for IKEA Samla 22l drybox. One part is 148,5mm x 210mm x 15mm so you need to print 2 pices of it with your favorite infill and no bottom/top layers. The mesh holds your selica in place. Print instructions…
1/12/2021 Added a Replay Binnacle V4 that is 2mm taller to accommodate 2 additional buttons and added 5mm holes for magnets for them. Added Stop Replay and Slow Motion Labels in my button box label project. 1/12/2021 Updated the…
SAMLA HANGA is a hanger for the very popular IKEA SAMLA storage boxes, allowing you to store 4-5 spools of filament without any screwing or drilling. It is based on "IKEA Samla box as Filament Storage" by Gnevko, but doesn't limit you to…
Drop in dividers for the Ikea Samla 1 Gallon / 5 Liter storage bins (AN: 701.029.72) , cleaned up and optimized slightly. Print 2 clips, slide them over the outside edge, drop in a divider and it should pop-in to the clip. They'll stay…
The problem with the original model is that there are openings on the back that allowed airflow and hence less heat could be retained in the enclosure.
Speficication IKEA Samla 22L 4mm thickness Printing TPU or other soft/flexible filament 35mm/s Printing Speed 100% Fan at Layer 2 0.8mm Retraction Lenght 0.5 Z hop when retracting 150mm/s Travel Speed Versions 4 Part Model for average…
Decided to make top cover using IKEA Samla 45L while waiting for the original topcover to arrive since my PETG prints keep lifting off bed and warping. I really liked the original with its more compact appearance but didn't like the…
This is mine version of SAMLA 22L Filamentbox with threaded bearing holders, which stops the bearing internal ring from spinning and prevents the filament role from slipping. Parts with internal thread (Pos.2 and Pos.3) should be scaled…
I just changes the design of the clip a little bit so you can stack the boxes (on top of the clip) if you want. :) You can see the difference on the 4th picture. Print Settings Printer Brand: RepRap Printer: Huxley Rafts: No Supports: No…
This is a sturdy wall bracket for hanging an Ikea Samla 22L box securely on the wall. The box is hooked onto the top and the square feet at the bottom at the same time. The box can be easily positioned along the bevelled bracket and hung…
