6512 modeli
I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…
360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…
***Updated 11-7-2022 | Now Compatible With 15mm & 22mm Tent Poles | *** Added 22mm ID versions of all clamps to add compatibility with grow tents that utilize 22mm OD support poles. If you need a version of these clamps with a different…
Mounting bracket. Recommended to print with a 0.4 nozzle with a layer height of 0.2 or less! For material, something that's more resistant to heat than PLA is advised. Commenter @jornthree_2921709 recommends PETG or ASA. I've used a PLA…
This is somewhat a remix of a remix. Crosslink did a remix for the Ender 3 V2 of 3D_LC's mounting plate . I didn't like to use the roller screws to mount this neither did I have any use for the cable routing channels as they can only be…
180° Tablet Holder Hinge for the Multifunction Arm Mounting System (Small Arm System) What you need Printed parts Multifunction Arm mounting system (Small Arm System) Multifunction Arm mounting system Spinning Adapter Big Clamp For Small…
Simple wall mount for skis and poles Category: Outdoor & Garden
This is a very practical smartphone stand / tripod, wich is perfect in many usecases. For assembly, you will need: 1x M5 65mm bolt 2x M5 25mm bolt 3x M5 nut Feel free to share your own experiences with the community! This smartphone stand…
A set of detailed stone pieces designed to support my Water Wheel model , and to be an easy addition to any tabletop terrain project! This is an easy set of pieces to print and put together, and it has enough detail for a simple…
News: 12.03.25 STEP files available MR-30 Male Mounting Frames Here you will find my designs for the XT60 size and XT30 . Two different shapes Compact design Easy to assemble Plug must be inserted from behind until the tabs click into the…
Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…
These are some bracket designs for holding a Master Cooler QUBE 500 PC case to the underside of a desk. This is ideal for people like me, who have an already cluttered standing desk and don't like cables reaching to the floor. There are…
Plate mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version , 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan . Features Thread inserts Display…
Cable Clip for the Multifunction (Small) Arm mounting system Features Fits on the “ arm-small-hex-honeycomb-wall-compatible ” Fits 4.50mm diameter cables
Tablet Holder for the Multifunction (Small) Arm mounting system Features Fits tablet-holder-small-[L, R] Fits a Galaxy Tab A8 Change Log 2025-01-01 Added the Step file as requested by @Ferrugius
Multiboard connector for items with mounting points for regular screws. Can for instance be used to connect Ryobi chargers to Multiboard. Recommended print settings (same as Multiboard defaults): 3 wall perimeters in wall thickness 15%…
A versatile, low-profile ceiling canopy system with a height of only 3 cm, suitable for various mounting situations. In case you only look for a holder for your existing canopy, also check the @mikhart remix for 10cm canopys Available…
V-Slot profile 2020 mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version , 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan . STL-Files for…
Für den Xiaomi Mijia Bluetooth Thermomether/Hygrometer habe ich eine Wandhalterung konstruiert. Da dem Gerät nur ein doppelseitiges Klebepad beiliegt und keine weiteren Befestigungsmöglichkeiten vorgesehen sind, könnte es bei einem…
Variation on the Vesa mount for the Multifunction Arm. This part allows mounting a screen to the side, rather than the end of the arm, which is especially useful for multi-monitor setup. Use together with the “Base-small-with-holow-M3”…
Needed universal 3,5" mounting bracket for SSD. I added any mounting holes I could find datasheets of.
I have finally developed a model for a very popular wall organizer. Now it can be used without drilling holes in the walls. There are two options available: for top\bottom mounting and for side mounting Plate size is about 58x58 mm for…
Please see my updated version of the Rosahl M-1J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
A simple under desk mounting solution for the Focusrite Scarlett Solo (4th Gen) audio interface. I couldn't find any solutions that I liked for mounting, so I designed my own! This is also designed using Zoo's modeling app ! The included…
Final release after more than 6 months of developing and testing! After a several month long beta process and countless improvements (especially of the auto-rewind mechanism) the complete EMMS works 100% reliable for month now. It took…
I used wood screws and mounted it directly to the wooden board. Power supply uses similar bracket. Also cables are held up with zip ties using this easy print: https://www.printables.com/model/205265-cable-management-easy-solution
I used to use @OneTrueMyth's Deluxe Tool Caddy for my Prusa Mk3S. Recently I put it into a LACK enclosure, which isn't large enough to hold the tool caddy. Perusing the usual sites, almost all tool caddy models for the LACK enclosure…
When you are in a wheelchair you need some convenient way to store your belongings. Many people hang a backpack on the back of the chair. However it is difficult to get something quickly out of it. Also it is difficult to keep an +"eye"…
Two brackets are included, one with a hole for the blue power LED, one without. PLA color in the picture is Prusament Azure blue, PRM-PLA-AZR-1000. The original brackets are designed for and tested with the 230V MeanWell power supplies…
A simple clip to attach a ring light to the top gantry bar of the Creality Ender 3 V2. I wanted to mount a 260mm ring light to my gantry bar to provide light across the entire print bed as some light bars cause a shadow to be cast by the…
Havis console mounting Motorola APX-8500 Mobile Remote Head Mount UPDATED POST size requested per @SeanOConnor_5174100 I modified the 3" deep version to 2.5". I have not printed it, but it should work fine. The 2.5" version is named with…
The default Reolink mount is designed for mounting to a wall with masonry screws or wall anchors. That's fine, but some applications need a clamping surface instead. This is particularly the case if you want to mount it onto a gutter, on…
This is a mounting cover/frame for a Rosahl M-1J1R electric dehumidifer membrane which can be used for a filament drybox of around 20-30l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…
This is a mounting cover/frame for a Rosahl M-3M1R electric dehumidifer membrane which can be used for a filament drybox of around 50-70l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…
Busch & Müller IXON Core light mounting bracket for the Trek Bicycle / Bontager Blendr system. Uses the original IXON Core mounting clip from the standard bracket. Blendr sizes are same as GoPro mounts so this should be compatible with…
I found plenty of mounts for Arduinos and PIs, but nothing for the STM32 Nucleo. So I made this. My board is the STM32-F446RE. It mounts to the 3 standoffs with M2 20mm bolts (18mm will probably do). There is space for a small breadboard,…
This improved version of the acoustic foam mounting bracket has been improved by adding in a structural beam to keep the mounting clamp from sagging under the heavier load of wider and denser acoustic foams. In combination with 3M Command…
This model allows a mounting of the Kistenberg's TRUCK STORAGE BIN 12 (KTR12) on perforated wall steel plates produced by the Element System. The KTR12 box:…
Just two brackets to mount and a plug to close the open side of an Hoymiles BC06 T-Knot. Nur zwei Halterungen für die Montage und ein Blindstopfen zum Verschließen eines Hoymiles BC06 T-Stück.
Box for housing the light switch and routing cables to lights. Mounts via double-sided tape on top of the MK4 power supply with extra brace around the frame for rigidity. The cover plate is attached by M3 screws which cut treads into the…
This is a replacement for the metal L-bracket included in the IKEA NISSEDAL mirror to mount it to a door or wall. 🔩Extra hardware you'll need: M4x10 threaded insert nut (x4) M4x12 bolt (x4) M4 washer, ~9mm diameter (x4)
This model allows a mounting of the Kistenberg's TRUCK STORAGE BIN 16 (KTR16) on perforated wall steel plates produced by the Element System. The KTR16 box:…
This shaver has a very curved handle, so slides around easily in the bathroom cabinet. This holder is easy to print (two pieces, no supports), assemble (requires two M3x10 screws, which go straight into the printed part) and mount (I used…
The power supply that came with my Ratrig kit did not have any mounting feet. This is the missing mounting foot. I left the angle clip a little big so it would be snug. This required me to trim off a bit to make it fit, so some manual…
Simple wall mounting bracket for an Eltako box. OpenSCAD file is included.
MikroTik RB5009 mounting bracket, can be installed either way (0 or 180 degrees) 4 x M4 nut and screw (length 40 mm) Recommended to sand with P120 sandpaper and then glue with epoxy glue
I love Sneaks' Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 , but the ideal position I was looking for required me to mount on the Z-Axis far enough away that the connectors were wobbly. This resulted in extremely blurry…
This design is particularly stable because it is based on two brackets. I used the original M5 thread insert. I removed it with some heat from the original bracket and reused it in this design. I inserted the thread insert during printing…
I designed this model to house an ADALM Pluto in. The native ADALM Pluto has no mounting arrangements, so if you need to include one in your project, this case fits it very snugly. It has the added advantage that the micro USB connectors…
This is a Neutrik D Series compatible mounting shell for Nexans LANmark-6 Evo Snap-in Cat.6 Ethernet Connector . I use the Type with the part no. N420.666 but I think the other LANmark-6 are also compatible. The part is easy to print with…
TLDR: 3D Chameleon is a (now) open source 4 filament AMS that can be used with many different printer models. Getting it to work well on an AnkerMake M5 using Orca Slicer (and in a compact space) took quite a bit of tinkering. Bottom…
Update 05/23/2024: Now that Frantisek23 has further perfected his design , I definitely recommend his new solution and basically declare my remix obsolete. Since the EndRib_V1b Mini.stl model is no longer available from him in the course…
The lights used to come with clips like these, but now only use adhesive strips, which aren't ideal. I like printing them wiht the screw hold facing down and then just using a brim for support. PLA can be a bit brittle, so a little more…
Pen holder for wall mounting with power strips. Extra space to detach. For 4 pens. We use it to label our annual calendar.Size for original power strips. For loosening from below with needle-nosed pliers, for example.
Pressure fit mounting box for FM Transmitter chip: https://www.amazon.com/gp/product/B08PVBZB8F/ NOTE: YOU WILL NEED TO REMOVE THE MIC FROM THE BOARD FOR THIS TO FIT Resolution: <= .28 Infill: >=20% Filament material: PLA Print with brim…
Necklace holder for 11 necklaces intended for wall mounting with adhesive mounting. Printed with MK4S on 0.2mm layers using PLA. I suggest adding a layer modifier for the layers that include the hooks to increase to 100% infill for…
Screwdriver holder for desk with wall mounting. A practical and robust holder that combines desk and wall mounting. I recommend PETG material and the color of your choice. The hexagon size is 9 mm. Thank you for downloading and I hope you…
Needed a mounting bracket for a friends car mobile radio so made in onshape. M4 screws for everything I printed in PetG, Polymake PolyLite. Print it on its face.
This Furitek Slidetech ESC has a cutout on the bottom for airflow and cooling…which is really helpful….except for when looking to double-sided tape mount it to the car. I created this simple mount that allows the ESC to sit off the bottom…
This is not an original Honda part or replacement for one, it is a custom part for better mounting of 20mm wide straps that end in a loop on the Honda CB1100. Make sure you have good layer adhesion and test the print, don't blame me for…
Yamaha soundbar remote control mounting fixture I wanted to mound my remote to those two aluminium rails on my bed. this is what i came up with. It fits perfect. I also included the Fusion 360 file so you can add your own mounting back.…
I recently bought a UNI-T model LM100 laser distance meter. Unfortunately, this meter is not equipped with a thread for fixing it to a tripod. So I designed a suitable holder with 1/4" UNC thread which allows you to mount this meter on…
Do not hesitate to ask for different lengths if the ones already uploaded do not suit your project! I was looking for a rail to mount a led light strip on, so it would light up the wall, but not blind me. I could not find exactly what I…
I did it with 0.15mm in pet for better heat resistance. For installation you need 2 M5 12m Screws and a ¼" Brass insert, I used this one:…
These mounting brackets are suitable for 30 cm width LED panels with screw holes on the back. The model has high tolerances for the drilled holes in the ceiling. Mounting is very easy. Push the panel to the ceiling and slide it in place.…
This mounting bracket was made specifically for the Zooz ZSE40 z-wave 4-in-1 sensor. This allows the sensor to be placed in the following positions: Sitting on a shelf pointing upward at 45 degrees Sitting on a shelf pointing sideways…
Mouunt can be attached with double side tape. Additional parts needed: 1x M3x25 screw 1x M3 nut
Replacement in case you break the tab off like I did Designed for: https://shop.homeseer.com/products/z-wave-door-window-sensor HomeSeer HS-DS100+ Z-Wave Door / Window Sensor
Simple, cheap mounting bracket for 50mm thick acoustic foam panels, no drilling required. Attaches to the wall with double-sided tape or Tesa Powerstrips / 3M Command Strips. UPDATE: I've added structural supports which, make the bracket…
i printed it from plas with the middle layers (mounting part) 100% infil and support on base plate.
A bracket for mounting the Logitech G703 USB Adapter/Dongle. Printing: Prints with no supports. Usage: Mount with double-sided tape.
A simple remix of the steel sheet holder by Waldmops but with letters embossed above the mounting holes.
Mounting bracket for 150W Meanwell power supply. Just put the prewired powersupply in the bracket and use 2 screws M3x6mm for mounting the powersupply. The bracket itself is to be mounted before with to countersunk screws, 4mm size.…
Easy to print. I've printed with 0,2mm resolution for beauty but I think 0,3mm is also fine. Horizontal one is 2 part print. Camera in this case is:…
Halterung für SKS Luftpumpe, Deckenmontage / Bracket for SKS air pump, ceiling mounting
The mounting plate allows the excellent charger holder for the JOYCUBE Fischer e-bike charger from Wolf Flow/db1337 to be attached to a grid with M3 screws and nuts. Print the mounting plate in STL orientation in 0.2-0.3mm layer height…
Simple Enphase Envoy mounting bracket for in the utility closet. You can extend its length a few millimeters to accommodate the 2 screw heads (I forgot to consider with this first model). Print instructions Printed in Prusa PLA grey with…
Small nozzles for mounting new 50mm IKEA Paragraf spare wheels on old office chairs. The Paragraf spare wheel shafts are now 10mm instead of 11mm diam. Using these very small nozzles, it was possible to mount new spare wheels on old chairs.
Bird Deterrent Spikes with Mounting Tabs Prevent birds from landing on ledges, fences, and other surfaces with these easy-to-install bird deterrent spikes . Designed with 90° mounting tabs , this model is perfect for outdoor use and…
I'm in the process of adding LED canopy lights to my upper deck. Since this is my upper deck, I needed to design holders for electrical conduit pipe that I will string the lights from. I created and printed several models to accomplish…
Remixed by 3DFW: This is a remix of ChickenMyBobbers’ clever Alpaka HUB mount replica. I made some small adjustments and uploaded it here on Printables to make it more accessible to others not using MakerWorld. Full credit to the original…
Now, I'm lazy. And I don't like wasting power from devices being on when they don't need to. I also wanted to be able to power the lighting for my Prusa enclosure AND have capacity to upgrade to more powerful ventilation fans without…
As a car wrapper, I need my wrap lettering tools on a daily basis. I created the holder for mounting magnets for the hanging insert in a BOSCH L-Boxx / Sortimo LB 238/374. With the magnets, large car films or posters can be aligned, fixed…
Voron Trident skirt option to fit the Shurter 4302.2001 and other inlet options with 50mm spaced m3 mounting holes. Use washers and nuts, this model is not designed to fit heatset inserts as the forces when plugging and unplugging cable…
Mounting for a switch. Additionally needed are 4x 18mm M6 screws and 4x M6 flat nuts. The flat nuts need to be inserted during the print before printing layer no. 51. The included gcode and m3f.file is prepared accordingly (see picture).…
When it's your co-workers birthday, you need to decorate the office of course. With this simple to print system you don't have to lift the plates to tuck the gardlands under it don't have to use tape to stick the garlands to the ceiling…
I created this bracket to mount the rear camera of the Viofo A129 Pro 4K Duo in my 2016 Miata. The lens has limited rotation, so the camera body must face backward. This mount allows a low-profile installation with good visibility whether…
I designed these mounts to fit the Keyhole mounting system that is usually found behind multiplugs or small systems that can be installed on the wall. This particular design is meant to be used with IKEA's galant desks; the mount fits in…
I created this bracket file to resolve a clearance issue I was having when installing a Tekonsha P3 Trailer Brake Controller into a compartment in the dashboard of my PN96 97-04 Ford F-150. I have verified this bracket will allow…
I usually use mainly PETG, and when printing PETG, it is recommended to apply glue to the PEI sheet as a release material. The glue applied will be uneven, so I lightly rub it with a kimwipe wetted with water to flatten it. So I made a…
Exposure Blaze MK3 is apparently a really expensive light that comes with a not very durable clip for mounting on the seat post. I made this for a buddy of mine who's really thrilled about my design's performance. There are stls for 27.2…
this is a recreated of the mounting clip of the Osram / Ledvance under Shelf light bar. This is the replacement part because the original ones break so easily. Other brands might work too.
Frsky Neuron 8A SBEC mounting brackets mounting brackets have been designed to be as small as possible for fixture two O-Rings are needed
The status light is still visible through the hole. Printed in PLA 0.2mm layer height 50% infill No supports needed
This Flagger mobile cradle can be mounted 3 ways ¼"-20 nut insert for tripod style mounts Countersunk holes for bottom or back mounting to a surface Countersunk holes for compatible AMPS style mounting bracket Flagger Mobile units are…
Meine Lampe ist mit einer 4W LED in einem G9 Sockel bestückt. My lamp is equipped with a 4W LED in a G9 base. Halogenleuchtmittel sind nicht geeignet! Halogen bulbs are not suitable!
I needed a keyhole slot mounted towel hook for my kitchen as the screws were already in place. Prints without supports, I did mine in 0.2mm layered PLA.
This model can be printed with really low detailed settings and as fast as you can. Supports may only be needed at the transition. Place them with double-sided tape and fix them with two two centimetre long screw's per block. When they…
The speaker is upside down so that the buttons are still accessible.
