14 301 modeli
This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…
Smoothly operating and very sturdy sliding barrel bolt lock thanks to the great original design by Jerry Lee With added “locked open” position and full FDM print optimized handle with threads, removing the need for glue. Update: per user…
The ideal third arm for your workshop or office. Much more than just a tool. This is the multifunction and electrified tool holder. Light, extraction fan, pliers, vices, phone charger/holder, ... a large number of electrical or mechanical…
4 handle sizes, perfect for your DIY projects
More information in this article .
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
This is the V2 version of my ergonomic multi size bottle opener, a stronger, more robust redesign made for users who prefer extra durability and stability. Compared to the previous version, this model is reinforced, making it less…
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Multiboard bottle holders with open bottom in sizes from 25mm to 120mm. The bottle holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the bottle holder on these connection…
🛠 Universal Add-On Drawer for Desks or Shelves – Multiple Variants Expand your storage space with style and practicality! This 3D-printable drawer is designed to mount under a desk or shelf, making it a perfect addition to offices,…
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
11 in 1 - Workshop Multipurpose Tool Features : Scale - 55mm Screw / Bolt Length Gauge M series - Bolt Size Gauge - 1 / 2 / 2.5 / 3 / 4 / 5 Screwdriver + Bit Holder (BIG) Screwdriver + Bit Holder (small) Allen Key Size Gauge + handle…
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
Simple / minimal multiboard tool holders in various sizes. Width 10 - 75 mm Depth 10 - 25 mm Use the parametric Autodesk Fusion fusion model for other sizes. Requires one of the Multiboard Snaps to click into. Recommended print settings…
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
This clamp will hold a table cloth in place. Tie a knot in two trash bags and hang them in the slot for recyclables and rubbish. Or use the slot as a place for dish clothes (they may also need a knot). Tie rope or paracord for one end of…
Updated version of the table coaster for MMU2S or any other mutlicolor printer Layerhigh: 0.15mm Support: no need Material: PLA wood or what's in your shelter 😊
This remix will hold a majority of the Philips Multigroom MG7750 accessories. I wanted a tray that would hold both the smaller beard guards as well as the larger hair guards. This was created using @Scatterthought's modular files. I used…
Easy to print captain america shield, no support, keyhole on the back for wall mounting There are a MMU version and several non MMU versions (200 to 400mm diameter) with 0.1mm clearance, just print and assemble.
Multipurpose Holder USB-A - 6x USB-C - 8x HDMI Type D (aka Micro-HDMI) - 2x SD Card - 8x MicroSD / NanoSIM - 4x horizontal & 5x frontal Print instructions Successfully printed using the Prusament PLA Prusa Galaxy Black. Printer: Prusa…
Printed at 0.3mm layer height on a MK3s and MMU2 with 3DQF PLA filament. I used support on build plate just for the fixings on the back but probably not necessary.
Multiboard bottle holders in sizes from 20mm to 150mm. The flask / bottle holders uses the Multipoint connectors. Use one of the many connector types to mount the bottle holders to the Multiboard . The bottle holders has the same OXO rail…
Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…
Cover for drill holes in furniture and walls. Low profile but still thick enough (0.6mm) to make colors work. Sizes 4 to 22 millimeter in 1mm steps are available. From 22mm on and larger, my advise is to use this much sturdier design:…
This are Multiple Upgrade Parts for your Dremel CNC by Nikodem Bartnik. Dremel Nut The original Nut in front of the Dremel doesn't fit on my build, cause the thread isn't long enough. So I designed a new nut to fix the Dremel and a tool…
Tablet Holder for the Multifunction (Small) Arm mounting system Features Fits tablet-holder-small-[L, R] Fits a Galaxy Tab A8 Change Log 2025-01-01 Added the Step file as requested by @Ferrugius
Multiboard connector for items with mounting points for regular screws. Can for instance be used to connect Ryobi chargers to Multiboard. Recommended print settings (same as Multiboard defaults): 3 wall perimeters in wall thickness 15%…
This model replaces the original mudguard with the integrated chainguard. Just removing the OEM one doesn't do the trick, as oil/grease/dirt from the chain will be yeeted everywhere. With this chainguard the back not only looks cleaner,…
Prints well large or small -- if you have dry filament you can go with a larger nozzle, as there isn't too much textural detail. Latest version adds seam painting and fuzzy skin where they're supposed to be fuzzy. When large, textured…
A cute English cocker spaniel puppy available as a multicolor print! Use supports when printing. Have fun printing and remember to post your makes!
The STL file is very small, you can size it for any printer. I have already added the filament changes to the 3mf file for the MK3s+, but if you resize it you will need to change the height of the filament changes.
Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.
I've got a few younger nephews that are into Wild Kratts and I originally remixed the design to add additional animals. I wanted to make some new ones and now have a multi material printer. After some comments on the original of how they…
I've remixed the spool holders from https://www.prusaprinters.org/prints/3673-mmu2s-enclosure zo they can be printed with hexagons, and numbers in different colors using the mmu. Mind the inner part of the number four. Print instructions…
Look at the pictures to see how to assemble it. Updated 2024-01-23: Made the rim/spring stronger. OK now, but still holds not perfect together. Consider to glue it ;) Chamfer instead of a fillet (suggested from @LibertyBeta_67371 )…
STAND for Digital Mulimeter DT830B (D), DT832, DT838 and many other clones. The stand consists of two parts. After assembly, the stand must be glued to the back of the multimeter. Easy and fast print!
What is included here are the files that you need to print to get the dual lock, which is the Idler Body, the Pulley Body, and the right Lock. You need an extra M3x35 screw with a spring and an M3 square nut, that you should have gotten…
Another Audioengine A2+ Speaker Stand. This one features options for multiple angles for optimal listening experience. Print on the side for a nicer surface. Includes insets on the bottom for anti-slip rubber feet with a diameter of 10mm.
Multiboard cotton swab holders in the following sizes: 100, 150, 175 and 200 mm. The holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the cotton pad holder on these…
Tiskněte v měřítku 10% K sestavení je potřeba 6ks šroubků M3x20. Víko, těsnění a klapky jsou z původního modelu kompatibilní.
(Edit: I finally learned how to intrude text to objects, so I have removed the Project files, and you can create your own. Basically everything is printed on 0.20mm STRUCTURAL and 15% infill, with a 0.4 nozzle in PETG.) 2 sets of…
Did this ever happen to you? Worry no more! It might not be the most aesthetic solution but it's simple and it works. The files are just examples for my probe (8/37mm)
(English below) Erweiterbare Mehrstockklemme für Klemmen WAGO 221-2411 zur Montage auf einer 35mm-Hutschiene: Diese Mehrstockklemme besteht aus einem Grundmodul, welches auf einer Hutschiene aufgerastet werden kann, einem Aufsteckmodul,…
A simple filament swatch and storage box - they're a dime a dozen! So what makes this one different? The lids have a satisfying slide and lock (via magnets) function so they don't come off accidently. The lids have multiple colors for the…
Lyman's Case Prep Multi-Tool has a hollow handle, so you can store its various bits inside it. But they just rattle around in there. I designed this core to fit in there and hold the bits securely. Post Printing The holes on the ends for…
We saw this epic Remix by MysticSaige on Thingiverse ID 5343846 and want to print it in Multicolor. So we painted it in PrusaSlicer and printed it with our Mosaic Palette 3 Pro in 8 Colors. But you also can print it normal as single color…
Adding to the skadis-system by Petri Damstén - this is a hexbit holder for the Stanley STHT070885 Multibit Screwdriver and nut setter. The hooks were created by Petri - which are required to attach the Stanley hexbit set to the skadis…
Die Lehre eignet sich gut, um größere Radien von Modellen oder Skizzen abzunehmen, wenn kein vollständiger für eine Messung mit einem anderen Gerät vorhanden ist. Das Modell ist aus PETG und mit MMU3 gedruckt. Es ist damit ein wenig…
I use these holders together with the 15x40mm version of the Multiboard tool holders in various sizes to keep the charger cables organized. Requires one of the Multiboard Snaps to click into. Recommended print settings (same as multiboard…
Mk3.5 LCD cover with printable version of the sticker, USB symbol, and reset button. I've noticed the footer gets slightly cut off at certain angles, so the LCD area is slightly expanded compared to the stock R3 version. A 0.25mm nozzle…
I designed this logo to be as close as possible to the original Cyberpunk 2077 logo. Unlike many existing models, this version is not simplified and is based directly on the Cyberpunk 2077 svg available on Wikipedia, ensuring accurate…
This enclosure lid fits the Multisystem V5/V6 (2022/2023) console. It uses the same base but has a new lid, backplate, SDcard mount and reset button. You can now make your Multisystem console into the style of classic consoles, this ones…
A holder to keep opened 0.5 g and 3 g super glue tubes in a standing position to prevent then from clogging. Requires one of the Multiboard Snaps to click into. Thanks to Jonathan ( KeepMaking ) for creating multiboard
This crocodile-shaped clip allows you to hold towels or whatever you need. The gear slides along the tail making the crocodile's "mouth" squeeze harder. The clip allows you to stick the crocodile in the sand. The crocodile's tail also…
This enclosure lid fits the Multisystem V5/V6 (2022/2023) console. It uses the same base but has a new lid, backplate, SDcard mount and reset button. You can now make your Multisystem console into whatever style of classic console you…
11/17/2025 - I didn't like the angle of the original mount that I made, so I made a few different variations to try them out and see which worked best. Figured others might like some different options as well. This is a gun barrel rest…
This is a remixed version of the original Recycling Fabrik MultiSpool, utilizing my Prusa Spool core for Recycling Fabrik Refills. The side pieces are thicker and the refill is held much tighter by the spool than by the original…
Additional parts needed VecMulti Multicard (2018 version with SD-slot mounted on separate PCB) 6 wires, approx 30mm length soldering iron de-soldering tool self tapping screw, max 18mm length Post-Printing De-solder the SD-slot PCB from…
Multi-Material, Print in Place Rubik's Cube NOTE: as of right now, this model is non-functional. There needs to be additional clearance between the individual cubes, but adding that while also providing enough adhesion between the PETG…
I designed this lantern when we needed a quick and simple St. Martin lantern for our little one — and I wanted to see how such a project could be made efficiently and with minimal material using a 3D printer. The result is a versatile…
Pièce créé pour la multiprise AOFO Multiprise intelligente WiFi https://www.amazon.fr/dp/B07SKTBC47?psc=1&ref=ppx_yo2ov_dt_b_product_details J'ai imprimé la pièce en PETG en 0.3m Le STL représente X1 Attache Le Gcode est près à imprimer…
Two lids, spacers between them, dividers to containerize them. Rest is on you. print lid 2x. spacers work 3x for me, but 2x aint hald bad either. for 2 spacers go with 2 taller dividers, for 3 spacers 2x tall, 1x low divider worked best…
There is two versions of the button available: one with and one without an insert. The insert dimensions are made to house a 55mm outer Diameter / 18mm inner Diameter / 3.8mm height Washer, which will lend some weight to the button.
This cradle holds the Ferrex M7 multitool, a small dremel clone sold by ALDI in Germany. You can extract it from it's holder by either grabbing the tool from the middle, or, if that is easier for you, by pushing down on the spindle in…
Various 3D models of bell and arrow signs in various languages, including English, Spanish, Portuguese, French, Italian, German. The file is in Blender and can be opened for editing.
This is my second original 3D design, and I wanted to create something simple, strong, and practical for everyday use. This wall-mounted hook features a clean, modern look with three staggered hooks, making it perfect for organizing keys,…
This is an external mout for 2 row goldpin block. You can use it for servo connection or oter purpose. It has a holes for M2 screws. Printed with support for clean inside and good insert clearance.
Captain Carter's shield, in a coaster form. Parts are not aligned when imported into Prusaslicer (this is my first multi-material design). select each part individually and set the X, Y, and Z positions to 0.0 for each part. if using a…
Original onShape project: https://cad.onshape.com/documents/0c3b8288c7b92d178ec1f3ff/w/b7a05d6d8787b131fd44b065/e/38e3f2fc0970434ac8e5aed7?renderMode=0&uiState=68fe239e2195008bbebe03d0
I created this box to hold the Go stones that come with every Go game set. Other boxes allow for holding the black and white stones, but don't give you a place to hold the stones you capture from your opponent during play. This box does…
Holder for Klein MM325 multimeter. Mounts with 2 #10 screws. Tolerance to hold leads are tight. If your machine can't hold a tight tolerance it may need to be scaled up slightly (<5%).
The head of the clamp mechanism on my Dremel 2500-01 Multi Vise snapped off so I remodeled it. Print instructions Printed in PETG with 5 perimeters for strength. I printed the main head with 15% infill but put a modifier in Slic3r to give…
Mým záměrem bylo nainstalovat Ulti Multi MMU3 na CORE One bez toho aby se zásadněji měnily rozměry a nebyla potřeba baterie externích bufferů. toto řešení navazuje na Prusa CORE One UltiMulti MMU3 Hlavní cíle: Významně nezvětšit rozměr…
Print in place, no supports needed. Color the print with a multicolor printer, or print it in a light color and use a permanent marker as shown in the picture. This organizer can stand on your work bench as well as hang on your…
Print Setting Short Sword Nozzle diameter: 0.4mm Layer height: 0.15mm Support: Yes for the body of the sword. No for the rest. (see the settings in the 3mf file) Brim: No Infill: Any Multi-color: No Material: PLA (Silk PLA recommended for…
2D Earth projection with a cut-away, so that the planet's layers are visible. Source .blend files are also included.
Háčky na úchyt nářadí do multifukční stěny Vytvořil jsem háček do multifunkční stěny v garáži. Dá se na něj pověsit nářadí atd.. Tisknuto na Ender 3 v2 neo Creality PLA (white) Doporučuji ve sliceru otočit háček na bok , tím se sice…
Intermediate piece for karcher WD 4 Premium and Bosch PMF 180 E. It wil mayby also work with a different vacuum cleaner or multi tool. The smooth one is les stong than the one with edges.
vvILa Salle logo keychain This multicolor keychain is prepared for 1 extruder printers. Instructions 1: Open the file in your Slicer. (I highly recommend Prusaslicer) 2: Place it upside down 3: Create 3 more extruders in Printer Settings,…
This simple little tool combines 6 tube blocks in one for use with full scale bike frame tube layout. That's all your standard sizes, with centerline markings, here to help clean up your drafting bench! Note that it is easy to knock tubes…
I took a 2x1 CU basic shelf and added the slab with holes and embossed sizing. Print as is no supports.
Multiboard holder for the OilStick from Slant3D - https://www.oilstick.shop Recommended print settings: 3 walls / perimeters 15% infill supports from buildplate - model laying on its side 0.2 mm layer height 0.40 mm nozzle PLA Special…
Bookends are just good old bookends, unless they can solve multiple burning problems at the same time: Too many great books cluttering the office. Excessive number of Prusament spools floating all over the lab. Numerous empty Prusament…
Halterung für 2 Paulimot Schnellwechsel-Stahlhalter System Multifix Größe A mit einem Grundhalter für 3 Halter montierbar an einem Regalbrett. Gedruckt mit ELEGOO PLA PRO auf Prusa XL Drucker 3 Wandstärken, Außenwände zu erst,Infill 20%…
Hello, Here I like to share my Multicolor Card “Ballern (Bicycle)” (which means something like “full steam ahaed” :) ), all on one layer, with several Filament-Changes on same layer look at the reference picture to match the original…
The Multicoloured Christmas Bookmark is designed so that you can print it in two different colours with a single extruder printer. No supports needed I printed with 20% infill but shouldn't make a difference if you used less. I have…
Two boxes to hang a Luxorparts Pro 60 W soldering station on a Multiboard wall. It consists of a box for the power unit and another box for the soldering iron. The boxes have cutouts for the cords going between the iron and power unit,…
I make shelves for propane and propane accessories, I tell you what. This is a storage caddy/shelf to hold a 1lb green propane bottle. This model was made to work with Multiboard, and attaches using the supplied "small, coin slot,…
Sleeping Bernese Mountain Dog gift tag and ornament - multi-colour for single filament printing. Created from a photo my dog Kitty currently 8 months old. Comes as a gift tag or as an ornament (without area to write on). My models are…
A small easy to print holder that screws in to the small thread holes of MultiBoard. It has the main holding sections where the deburrer hangs in place. It also has two holes that can hold spare blades for the deburrer. the File should be…
Mod British Roundel - ska/mod 3D model for single filament multi-colour print My models are free but if you'd like to buy me a coffee https://buymeacoffee.com/davidlachlanmoore that would be greatly appreciated. Thanks. Note that the…
Its a Remix from AKinferno remix :) you find the original on Thingi ID 5383489. The original cames from WheatlyLaboratories Axolotl and McGybeer's "Articulated Lizard" and the head comes from “Schlossbauer” Axolotl. We painted it in…
Dimensions (LxWxH) 132 x 150 x 32mm (100% scale) Basic information The design was inspired by the Green Sea Turtle, which is undoubtedly one of the most iconic sea animals. The model is is split into 6 movable parts: a shell, which serves…
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Arm mounting system Added source file of basic arm - parametric (you can see the process of drawing teeth) (f3d) Added source file for bolts and nut (f3d, stl) It is a universal set of holders and arms. You can use this system as a…
This articulated axolotl is a remix changing the head in order to make it more round and less edgy. I additionally fixed a part o the 3D model where a link was slightly fused together. Features Looking cute Easy to print (pre-supported…
Dimensions (LxWxH) 170 x 84 x 53 mm (100% scale) Basic information Great white sharks are definitely among the most fearsome and legendary ocean hunters, so it is not surprising, that everyone would love to have one in their collection.…
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
![Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger](https://media.printables.com/media/prints/664262/images/5232779_79e6456f-825b-420c-b549-25ccaeddc536_e9b42033-6509-4546-87ec-a2d2b3b002b1/dsc_3556.jpg)
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
![Multipurpose Holder [USB-A, USB-C, HDMI Type D, SD, MicroSD]](https://media.printables.com/media/prints/31807/images/313387_b0da4114-99ad-4cdc-b60e-9467a88a80c6/multipurpose_holder_2020-may-16_09-19-05pm-000_cu.png)
![[Testers Wanted] Multi-Material Print in Place Rubik's Cube](https://media.printables.com/media/prints/572376/images/4578518_479a5991-9a3a-49ac-9fb3-138463d24338/rubiks_cube.png)
![LGB [A5] Rewindr installation on Prusa CORE One UltiMulti MMU3](https://media.printables.com/media/prints/a2f74b23-29c1-4d3e-bf93-49f9a08e340a/images/10651718_31af951e-f011-4d75-9dd0-57a9fe36223c_3aaa957a-6613-4110-a12d-9901930de768/img_20250911_095819_332.jpg)
