Wyniki wyszukiwania: neo

Sortowanie

3114 modeli

P
PrintablesFreshPrints

Anycubic Kobra 2 Pro Bed Level First Layer Calibration Squares and Brim Test Also works with Kobra 2 / Kobra 2 Neo

This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…

Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu

Pobrania
6450
Polubienia
304
Ocena
4,89
P
PrintablesAdafruit

Zelda: Breath of the Wild – Guardian Sword with NeoPixel LEDs

Read the full guide on: https://learn.adafruit.com/breath-of-the-wild-guardian-sword-led-3d-printed/ This is the Guardian Sword from Zelda, Breath of the Wild. It’s fully 3D Printed and has a ton of NeoPixel LEDs. This thing is super…

Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu

Pobrania
1200
Polubienia
925
Ocena
5
P
PrintablesSierraGolf

Govee Neon Clip

Die beiden Govee Clips brauchte ich für ein bestimmtes Wandmuster. Dabei habe ich den Doppelten Clip für enge 180° Kurven benutzt, da 2 Clips ohne eine Verbindung nicht gehalten haben. Ich gebe euch aber noch die Rohdatei dazu, dass Ihr…

Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu

Pobrania
515
Polubienia
75
Ocena
5
P
PrintablesYveske

DJI Neo 2 Go Pro Mount

Mount stuff underneath the DJI Neo 2

Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
293
Polubienia
31
Ocena
0
P
PrintablesCrashDown77

Holder for 24 x NeoPixel LED Ring WS28128B

The simpliest LCD Neopixel wheel holder there is. Used for Neopixel LED ring WS28128B

Wydruk około 1,04 €–1,28 € nettoWstępna wycena jednego wariantu

Pobrania
163
Polubienia
24
Ocena
0
P

Shock absorber spacers for Tamiya Neo Fighter dt-03 chassis.

I designed some shock absorber spacers for tamiya dt-03 chassis Neo Fighter They are used to use the maximum spring compression with the original shock absorbers. I noticed that the springs had little compression even with the stock…

Wydruk około 0,75 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
82
Polubienia
17
Ocena
0
P
PrintablesMax Aalderink

Argon Neo 5 shelf

This is a shelf for the Argon Neo 5 (with NVME expansion) case for the Raspberry Pi 5. It has a ventilation duct in de back for case fan exhaust and a perforated bottom for the NVME heatsink. The mounting holes are designed for M3…

Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu

Pobrania
75
Polubienia
4
Ocena
0

Replacement Anycubic Kobra Go/Kobra Neo Z Flag (Photoelectric Switch Baffle)

The included flag was bent for some reason so this was created to avoid replacing a non-print-impacting part. You'll almost certainly want to use black filament for this print since you need to for sure block the IR light in the sensor. I…

Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
75
Polubienia
6
Ocena
0

Desktop Neon Sign Tall Base for Underside of PCB - AA Batteries

Remixed the base model to make the base 10mm taller to accommodate the battery holders soldered to the underside of the PCB for easier battery swaps. The Original project can be found here:…

Wydruk około 4,51 €–5,51 € nettoWstępna wycena jednego wariantu

Pobrania
69
Polubienia
33
Ocena
0
P
Printablesswablab e.V.

osVAC M32-R50-54 (osVAC Neo) - wall mount option

Thanks for Hobbyhimmel for inventing this system: https://www.ossso.de/osvac/

Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu

Pobrania
64
Polubienia
11
Ocena
0
P
PrintablesGamerMechanic81

TwixT "Ingeneous New Strategy Game For Two" published 1962 by Avalon Hill

Most of what you need to know about this game is found at boardgamegeek link below https://boardgamegeek.com/boardgame/949/twixt Rules are also found in one of the pictures above. The original game was designed to be split into 4 8"square…

Wydruk około 9,94 €–12,15 € nettoWstępna wycena jednego wariantu

Pobrania
55
Polubienia
23
Ocena
0
P
PrintablesGamerMechanic81

Zócalo Neon Sign (From Babylon 5)

The Zócalo on Babylon 5 was a central meeting place in red sector where many characters would go to unwind, have drinks etc. The ice blue neon sign recreated here featured in many many episodes in the background. Through various forums…

Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
45
Polubienia
17
Ocena
5
P
Printables4D

Neon Kactus 1l bottle spare and better strap

Original strap has a weak point in pins what goes thru bamboo lid. So I designed much more better version and with nickname of my colleague's wife.

Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu

Pobrania
34
Polubienia
0
Ocena
0
P
Printablesodysseus31096

Corsair Xeneon Edge Monitor Riser for Cable Clearance

This riser is designed specifically for the Corsair Xeneon Edge monitor to provide additional clearance under the stand. The added height allows you to comfortably route cables — such as keyboard, mouse, USB‑C, or charging cables —…

Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu

Pobrania
30
Polubienia
4
Ocena
5
P
PrintablesBydmar

Magnetic latch for 10x2mm neodymium magnets

Simply slide in a 10x2mm neodymium magnet in the pocket (no glue needed) and glue other 10x2mm magnet to the surface of door etc. I use mine to keep door closed against foam for extra sound proofing my printer in diy enclosure made of…

Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
20
Polubienia
2
Ocena
0
P
Printablesodysseus31096

Tobii Eye-Tracker Holder for Corsair Xeneon Edge

This mount is designed to hold a Tobii Eye Tracker on top of the Corsair Xeneon Edge when the Xeneon Edge is used as a companion monitor placed below your main display. The mount positions the Eye Tracker between the two monitors so it…

Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesSJM

Shoei vertical Mount for GoPro Adapter Helmet Gen 3 (Neotec 3, GT-Air 3, J-Cruise 3) for right side Helmet Accessories Connector (2 of 3)

Shoei Gen3 GoPro vertical Clip-Mount for right side Helmet Accessories Connector. Print-in-place. Generation 3 Helmets are: Neotec3, GT-Air3, J-Cruise3…

Wydruk około 1,32 €–1,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesKraiden

Ayaneo Next Logitech K780 stand

A stand for the Ayaneo Next that slots into the phone/tablet stand on the Logitech K780, so you can play games that require a mouse and keyboard on the go. Works fine, just be careful when you pick the device up out of it, I somehow…

Wydruk około 5,67 €–6,93 € nettoWstępna wycena jednego wariantu

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesFrinn

Paraglidable Paragliding Dashboard with Homeassistant (Neopixel, WLED)

This Project assumes that you already have a HomeAssistant server running! Hardware: Neopixel strip (WS2812B; 60 LED/m; 5V ) small wires Wemos D1 mini board (or any other small board that can run WLED) Power supply 2 x M3x5 screw…

Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
9
Polubienia
5
Ocena
0
P
Printablestom

Passende Pins zu Neodym-Magneten mit einer Größe von D10 x 2 mm/ Matching pins for neodymium magnets with a size of D10 x 2 mm

Mit passenden Neodym-Magneten ergänzt, hat man einen praktischen Magnetpin. Der Magnet wird einfach mit Sekundenkleber eingeklebt – das Entfetten nicht vergessen! Das Modell ist so gestaltet, dass der Magnet minimal übersteht, um eine…

Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesmrFenyx

Anycubic Kobra 2 / Kobra 2 Pro / Kobra 2 Neo - Bed Alignment Cover

This is a clip-on cover for the cable connector that goes to the bed of the Kobra 2 Pro . It should also work on the original Kobra 2 and the Kobra 2 Neo . The cover is meant to act as a bed aligner. It is also easy to put on and remove…

Pobrania
9507
Polubienia
790
Ocena
4,68
P
PrintablesDrewDeeDoo

Anycubic Kobra 2 UPGRADE plus Kobra 2 pro Kobra max Kobra 2 neo

The absolute best modification you can make on your Kobra 2 class printer. And it's FREE! Better cooling with true 360 coverage Quieter than stock Unobstructed nozzle visibility Fast (tooless) removal to fix clogs/replace nozzles Uses…

Pobrania
7708
Polubienia
883
Ocena
4,69
P
PrintablesFreshPrints

Anycubic "SPINE" Cable Chain for Kobra 2 Series printers , Kobra 2 Max , Kobra 2 Pro , Kobra 2 Plus , Kobra 2 Neo , Kobra 2

The Spine chain was made popular by @rogerquin_304616 when he designed it for the SOVOL SV06 . This is my version for the Anycubic Kobra 2 Series printers. This is my original work and drawings all inspiration for this design goes to…

Pobrania
7517
Polubienia
1178
Ocena
4,84
P
PrintablesAnonymousgoat

Dummy 13 Angle wings by Neoteclabs and Jeffrey Yang

I DID NOT MAKE THIS. I did not make this design NeoTecLabs “made” this they stole the design from Flexi Alicorn by Jeffrey Yang. but a lot of people liked what they made including me and have been asking around for the files so I am…

Pobrania
5947
Polubienia
774
Ocena
4,46
P
PrintablesDeltaX_F

Airbus A320 NEO

A really classic aircraft. After modeling the 737-800, I decided to model its rival, the A320 NEO. Both are to scale, same as my MD-11 and 747-100. Scale is 1:400

Pobrania
5699
Polubienia
226
Ocena
4,91
P
PrintablesFreshPrints

Anycubic SNAP-ON Bed Sheet Aligners Kobra 2 PRO , Kobra 2 , Kobra 2 Neo Works with the Strain Relief and Cable Drag Chain

Easy Install version Snap-On set of bed sheet aligners. Compatible with factory bracket, Also Strain Relief & Cable Chain Anycubic Cable Drag Chain Anycubic Strain Relief PETG Print with 15% to 20% infill. Left Mount needs support:…

Pobrania
5504
Polubienia
601
Ocena
4,93
P
PrintablesFreshPrints

" Anycubic Key " Proximity Sensor height tool & Extruder Tension disengage tool & for Kobra 2 , Kobra 2 Max , Kobra 2 Pro , Kobra 2 Neo , Kobra 2 Plus

" Anycubic Key " 2 Tools in One Extruder Tension disengage tool & Proximity Sensor height tool. Disengage tool allows you to disengage extruder tensioner. Gives you the ability when you load your filament all the way without having to…

Pobrania
5228
Polubienia
592
Ocena
4,96
P
Printablesmigrvnes

Anycubic Kobra 2, Neo, & Pro - Top Mount Spool Holder

Print with the flat side down, as shown in the model. This model works for Kobra 2, Neo, and Pro. I have updated the photos to include the proper way to install the holder. This way the spool does not come into contact with the printer in…

Pobrania
4563
Polubienia
295
Ocena
4,95
P
PrintablesDIY Machines

How to make Desktop Neon Signs - 3D Printable, Battery or USB powered & Dimmable!

Please take a moment to like this project and download it from Printables - it really helps me out! Thank you Today we’re making some of these awesome customisable desktop neon signs. These ones can be powered by either a USB cable or 4 x…

Pobrania
4376
Polubienia
1611
Ocena
4,93

Anycubic Kobra 2 Neo PrusaSlicer Profile V2

This profile is the V2 of my previous profile that offers fantastic print quality over speed, ensuring that your creations are meticulously crafted with precision and detail. This profile will allow you to achieve the same fantastic…

Pobrania
3799
Polubienia
82
Ocena
5
P
PrintablesMartin

Enterprise-G Neo Constitution Class

This is 3D printable model of the Neo Constitution Class NCC-1701-G Enterprise from the Star Trek. It is a kit. The different colored parts are separated for easier printing. If you prefer this ship with its original name and registry of…

Pobrania
3058
Polubienia
426
Ocena
4,86
P
PrintablesDarian

Anycubic Kobra 2 Neo Orca Slicer Profile

This is my Orca Slicer profiles for my Anycubic Kobra 2 Neo. PLA Filament profile included (Sets the bed to 45 degrees). I took the PrusaSlicer profile and converted it to Orca Slicer. If it helps please consider leaving a review and a…

Pobrania
3053
Polubienia
99
Ocena
5
P
PrintablesFreshPrints

Anycubic Filament Runout Sensor Print Head Mount for Kobra 2 Pro , Kobra 2 Max , Kobra 2 Plus , Kobra 2 Neo, Kobra 2

Move your Kobra 2 filament runout sensor to the extruder with this mount! Placing the sensor closer to the extruder reduces filament wasted at the end of a spool, Great for top mounted spool holders and varies other locations. 3 Model…

Pobrania
3045
Polubienia
459
Ocena
4,88
P
PrintablesFreshPrints

Anycubic X Axis Cable Clip for Kobra 2 / Kobra 2 Max/ Kobra 2 Pro/ Kobra 2 Plus /Kobra 2 Neo

Cable Clips for the X-Axis. Print Intrusions: PLA or better 100% infill Pair well with this one. This will protect you X Axis Cable from damage. Anycubic Tie Wrap Replacement for X-Axis

Pobrania
2854
Polubienia
294
Ocena
4,95
P
PrintablesFreshPrints

Anycubic Filament Runout Sensor Redirection Mount for Kobra 2 Max / Kobra 2 Pro / Kobra 2 Plus/ Kobra 2 Neo / Kobra 2

This allows redirection of filament for easier travel to hot end when printing with a top mounted spool holder. Installation and Design explanation: Runout Senor Bracket: Tighten down the bolt to sensor bracket to the bottom base. Then…

Pobrania
2810
Polubienia
303
Ocena
4,89

Anycubic Kobra 2 Neo PrusaSlicer Profile

This profile prioritizes fantastic print quality over speed, ensuring that your creations are meticulously crafted with precision and detail. This profile will allow you to achieve the same fantastic results that I have without…

Pobrania
2657
Polubienia
80
Ocena
5
P
Printablespossebaer

Anycubic Kobra Neo / Kobra 2 Neo Trays

A small tray to go below the heat bed, to catch purge from the hot end. The tray has some kind of studs below that go into the aluminium extrusion profile cross beam. There is enough distance to the rollers that move the heat bed, and you…

Pobrania
2540
Polubienia
280
Ocena
4,89
P
PrintablesFreshPrints

Anycubic Strain Relief V2 Kobra 2 Max / Kobra 2 / Kobra 2 Pro / Kobra 2 Plus/ Kobra 2 Neo

This Strain Relief works with your OEM cable bracket. No disassembly required. Just tie wrap and your good to go. Also including a file for clone of OEM bracket, in case you want to change the color to match your new strain relief. The…

Pobrania
2451
Polubienia
320
Ocena
4,89

Recommended Prusa Slicer profile for Anycubic Kobra 2 / Kobra 2 Pro / Kobra 2 Neo / Kobra 2 Max

To add a profile for a specific printer, adjust the table dimensions and axis height according to the model, and then customize the profile according to personal preferences. PLEASE PROVIDE FEEDBACK ON HOW THE FILES WERE HANDLED AND A…

Pobrania
2180
Polubienia
132
Ocena
0
P

Ender 3 V2 Neo 'naked' fan holder

I'm pretty happy with my new Creality Ender 3 V2 Neo, though in a short time (like 2 weeks of usage) fans started to produce funny noices. Taking to account, that original fan casing hides both fans and it's impossible to see if they are…

Pobrania
1976
Polubienia
292
Ocena
4,92
P
PrintablesPaC1337

NOOZLE COOLING AIR DUCT FOR ENDER 3 NEO / ENDER 3 V2 NEO

Simple nozzle cooling air duct modification for Ender 3 Neo or Ender 3 V2 Neo, to provide improved and even cooling from all sides. Very clean and simple print with no supports needed Still a work in progress but works for me nicely Edit:…

Pobrania
1957
Polubienia
225
Ocena
4
P
PrintablesFreshPrints

Anycubic Kobra 2 "Flow Rate Cube" Calibration for Kobra 2 Max / Kobra 2 Pro / Kobra 2 Plus/ Kobra 2 Neo / Kobra 2

The flow rate calibration is done in order to fine tune the amount of plastic extruded by the printer. Also known as Extrusion Multiplier , by calibrating the flow rate you can fix issues caused by under-extrusion or over-extrusion.…

Pobrania
1905
Polubienia
207
Ocena
5
P
PrintablesKuba

Anycubic Kobra 2 Neo Printer Profiles PLA/ABS/TPU/PETG (Orcaslicer)

These are the settings I currently use for my Kobra 2 Neo with OrcaSlicer, I will try to update them if I find any good tweaks. In order to use them: -Printer: Kobra 2 Neo V1 -Filament: Any / make your own -Process: Use the processes that…

Pobrania
1874
Polubienia
36
Ocena
0
P
PrintablesHands on Katie

Neogrid: the Complete Home Organisational System for larger items

I love Gridfinity for organising small parts in my home. It does, however, not work for larger items - so I designed a solution that works with Gridfinity and allows me to store larger items and interoperates as one of the four solutions…

Pobrania
1833
Polubienia
719
Ocena
5
P
PrintablesWayan Traversat

Ender 3 v2 Neo - Cooling Fan Duct 2x 4020 Fans (Noctua)

Note: For assembly instructions please follow the original post Version I: I initially pritned the Neo Thang cooler for the hot ended of my Ender 3 Max Neo. I however was wondering why both necks were so long. So I shorted both. This…

Pobrania
1810
Polubienia
245
Ocena
4,93
P
PrintablesSuddoku

Ender 3 V2 NEO Chain

This is a modified cable chain end mount for the Ender 3 V2 NEO, allowing the chains to be mounted so they run nicely parallel to each other and the printer. You will need to print 48 Clips + 48 Chains: X-axis: 13 Y-axis: 13 Z-axis: 22

Pobrania
1771
Polubienia
317
Ocena
4,08
P
PrintablesTechonrye

Anycubic Kobra 2 Neo Top Mount Spool Holder and Filament Guide

After being fed up with the flimsy excuse of a spool holder that came with my Kobra 2 Neo. I decided to make a top mounded spool holder. (I wanted more horizontal space) This Spool holder bolts right into the top center of the frame. This…

Pobrania
1679
Polubienia
134
Ocena
4,9
P
PrintablesDr.Enchanted

Ender 3 V2 Neo Sprite Pro Fix .

For the Ender 3 V2 Neo and Sprite Pro. First print the SpriteProHouse file properly oriented or using the gcode files provided, with a printer that's working. If using PLA and the gcode files, drop the temperature to 215 and the speed to…

Pobrania
1508
Polubienia
168
Ocena
4,94
P
PrintablesBobdeBouwer

Fysetc Stealthburner LED carrier for Neopixel rainbow barf LED

Made this remix of the Rainbow barf LED carrier to fit the FYSETC variant. The FYSETC variant doesn't have a notch in the PCB and the connector takes up more space than the original design accommodates. The original file, including the…

Pobrania
1507
Polubienia
145
Ocena
5
P
PrintablesMZ4250

Miscellaneous NPCs and PCs Collection

Miscellaneous NPCs and PCs for your TTRPG games

Pobrania
1485
Polubienia
168
Ocena
0
P
PrintablesMartin

Anycubic Kobra Neo fan duct

Newly created fan duct for Anycubic kobra neo. it's about 4th version, it's still not perfect, but much better then stock. Printed with 0.6 nozzle with 0.2 layer height from PLA ( PETG will be probably better ), without supports Just…

Pobrania
1459
Polubienia
102
Ocena
4,27
P
PrintablesFreshPrints

Hotend PTFE Cutter Cutting Jig For Anycubic Kobra 2 Max Kobra 2 Pro Kobra 2 Neo Kobra 2 Plus Kobra 2 Also Included Universal PTFE Cutter

Cut a new PTFE tube for your Kobra 2 Serie Printer with confidence. Already premeasured just insert and cut. Note: This is the correct length from factory. If after you cut PTFE tube and you insert, and it appears to long. You will need…

Pobrania
1428
Polubienia
233
Ocena
5

Anycubic Kobra neo/go dual Z mod

Required hardware: 1 - NEMA 17 stepper motor (try and get one that's the same height as the original motor 34 mm. if you use one that's too tall it might interfere with the x-end-idler bracket when you try to home the Z) 1 - motor…

Pobrania
1364
Polubienia
220
Ocena
4,91
P
PrintablesDaSa

DJI NEO portable case (version 3)

3rd version of my minimalistic box for DJI Neo. Supports USB charging on the go. Can be worn as crossover bag or can be put on your belt or just be thrown in your backpack. When closed it's very durable. Can be printed from PETG or PLA…

Pobrania
1354
Polubienia
121
Ocena
4,92
P
PrintablesOnejensen

Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro | V-Slot Covers

Tired of the typical profile fillers that look almost the same as original? Introducing the ULTIMATE PROFILE COVERS!!! Turn your old (or not that old) printer into a modern looking printer with these simple accesories. Slide them in like…

Pobrania
1312
Polubienia
243
Ocena
3,75
P
PrintablesMivin

NEO THANG

The NEO THANG! -Models corrected 02-05-2023, see comments for description. -3mm Brass Heat Insert mount version 02-24-2023 -V2 screw mount and melted insert added 2-29-2023. I corrected a wall thickness issue that left holes with some…

Pobrania
1287
Polubienia
155
Ocena
5
P
PrintablesJON.JFL

Ender 3 V2/Neo/S1 Knurled Knob

I uploaded here in Printables this two models from Thingverse, because I didn't found no of those here. The LCD_Knob fits in the LCD Button of the Ender 3 S1, V2 and Neo models. While the Belt_Knob fits only to the belt tensioners from…

Pobrania
1263
Polubienia
198
Ocena
4,86
P
PrintablesCosmicNimbus

Ender 3 v2 Neo Cable Chain and Direct Drive extruder mount

Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Hey fellow Ender 3 v2 Neo user ! I've been looking for a working cable chain setup for my E3v2Neo that also allows for the Direct Drive…

Pobrania
1259
Polubienia
143
Ocena
4,75
P
PrintablesTechonrye

Anycubic Kobra 2 Neo End Stop Fix

This variation is for the Kobra 2 Neo. This fixes the issue where you no longer have the tool head case to hit the end stop. This is for compatibility with…

Pobrania
1249
Polubienia
107
Ocena
4,88
P
PrintablesAndyson

Anycubic Kobra 2 (Pro/Neo) - Feet

Hello, to compensate the forces from fast printing, i created a new “pair” of feet from scratch. Also the new feet fit so well, that when you move your printer, the feet stay connected. You also can use them for other printers, if the…

Pobrania
1233
Polubienia
175
Ocena
4,77
P
PrintablesKobraC0mmander

AnyCubic Kobra Neo Filament Catcher

This piece fits in the tracks under where the nozzle defaults to. This will catch bits that fall off the nozzle and keep them from going under the printer. 2 Models, one is wider that goes more under the bed so nothing is missed. Supports…

Pobrania
1232
Polubienia
125
Ocena
4,88
P
PrintablesDimOn

Side spoolholder for Anycubic Kobra 2 Neo

Make printer more compact. I tested the model for 2 weeks. 30 hours of printing. There were no problems. Filament PET-G (~140g) Layer - 0.2mm Wall - 2mm Top and bottom - 2mm Infill - 25% Printing with supports The parts in the files are…

Pobrania
1232
Polubienia
168
Ocena
5
P
PrintablesMichael Nicola

Ender-3 Max Neo Top Rail Bracket

This bracket mounts the factory spool holder from the Max Neo to the top rail. You can use the same screw that comes with the original holder. This is a quick prototype that still needs a little work, but I could not find anything…

Pobrania
1217
Polubienia
120
Ocena
5
P
PrintablesNeozoen

Neo parametric frame brace

Update 20260914 I uploaded a fixed version as f3d and one .step-file with M5 bores. ____________________________________________________________________________________ The original design by VEZ3D looks awesome but i needed it in…

Pobrania
1205
Polubienia
223
Ocena
5
P
PrintablesM. Vávra

Ender 3 and 3 V2 NEO Filament Guide (with printed bearing)

Filament guide with printed bearing (print in place) for Ender 3 V2 NEO. Printed with PETG without supports.

Pobrania
1191
Polubienia
129
Ocena
4,5
P
Printablesgalego tattoo

USB Holder for anycubic Kobra 2 Neo

A USB holder for anycubic Kobra 2 Neo. I don't know if it would work for other cobra models. Easy 3-piece assembly. I recommend printing them separately, although I did not try printing them together, even so, I would advise against it.

Pobrania
1180
Polubienia
135
Ocena
4,58
P
PrintablesIconic FAB

DJI Neo Adventure Command Center — transport box, storage crate

About DJI Neo Adventure Command Center Introducing the DJI Neo Adventure Command Center : a rugged, all-in-one transport solution engineered for drone pilots who refuse to compromise. This shockproof transport vault not only houses your…

Pobrania
1156
Polubienia
204
Ocena
4,88
P
PrintablesFreshPrints

Anycubic Tie Wrap Replacement for X-Axis for Kobra 2 Max / Kobra 2 Pro / Kobra 2 Plus/ Kobra 2 Neo

The tie wrap they tell you to put on the X-Axis to hold the cable crushes the cable and will damage overtime. Here is a fix to keep your cable flat and in good condition and not being crushed. Print Intrusions: PLA or better 100% infill…

Pobrania
1150
Polubienia
129
Ocena
5
P
PrintablesKaan Okcu

Anycubic Kobra Neo Fan Duct

After realizing that default fan on anycubic kobra neo is blowing directly on the thermistor I was looking for a new one but all of the ones here ( I tried 3 different models) have problems. They are either hitting somewhere, or blowing…

Pobrania
1144
Polubienia
116
Ocena
4,67
P
PrintablesFreshPrints

Anycubic Drybox Filament Sensor Bracket v4 PC4 M10 Reverse Bowden Kobra 2 Max / Kobra 2 Pro / Kobra 2 / Kobra 2 Plus / Kobra 2 Neo

Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…

Pobrania
1144
Polubienia
128
Ocena
5
P
Printablesdevil_leo

Anycubic kobra 2 Pro and kobra 2 Neo Handle

Handle for kobra 2, kobra 2 pro, kobra 2 neo. I left the inscription as in the original, but added a modified version

Pobrania
1119
Polubienia
135
Ocena
4,7
P
PrintablesRetro Hipster

Ender 3 v2 Neo Spider Hotend Adapter Brackets

If you are searching for this it's probably because you also purchased a spider v2 hotend only to discover that, much like a lot with the neo, it wasn't actually compatible out of the box . The spider hotend is 5.5mm higher up on the…

Pobrania
1114
Polubienia
111
Ocena
5
P
Printablesmaketvee

Embedded Neopixel LED Christmas Tree

Christmas tree with embedded addressable LEDs using color change feature of PrusaSlicer. 3D print is divided in 4 stages with in total 25 LEDs. Using a Trinket M0 Arduino compatible board and a Li-ion battery to drive the LEDs and…

Pobrania
1098
Polubienia
156
Ocena
5
P
Printablessmogan71

Cable Clip for Anycubic Kobra 2 X-Axis | Kobra 2 Pro | Kobra 2 Max | Kobra 2 Plus | Kobra 2 Neo

ENG: My printer came with only three of these clips, but I wanted a few more of them for thighter spacing at the ribbon cable. made with tinkercad. GER: Der Drucker wurde mit drei dieser Clips geliefert. Ich wollte ein paar mehr haben um…

Pobrania
1098
Polubienia
128
Ocena
5

Tool holder for Anycubic Kobra 2 Neo

Tool holder for kit included with printer. Mounted under LCD with its screws.

Pobrania
1092
Polubienia
177
Ocena
4,73
P
Printablesmeikk1

Anycubic Kobra Neo Z-Axis Knob

The knob itself is a remixed Version of the Knob from @Runfrcover, the test-thread is exactly the same. Just extended it, to fit for the Kobra Neo. Print the Thread_test_AKNEO first, to try if it fits. In my case i had to scale it up by…

Pobrania
1078
Polubienia
115
Ocena
4,88
P
PrintablesiZboxo

Minecraft Lantern - Arduino WiFi NeoPixel

Hey! I liked the minecraft lamp idea on my table, I've wanted to control it with HomeAssistant so it's flashed with WLED. (you don't have to have homeassitant to control it) Parts you need: Wemos D1 mini | Laskakit | Aliexpress Neopixel |…

Pobrania
1074
Polubienia
865
Ocena
5
P
Printablesjuiceboxjuice

LED Neon Strip Mount

Should work with a few variations of LED strips. Tested with this one : https://www.aliexpress.com/item/1005004674510543.html

Pobrania
1065
Polubienia
153
Ocena
5
P
PrintablesElliott Bradley

Anycubic Kobra 2 Neo Spool Holder

This is a spool holder designed for the Anycubic Kobra 2 Neo using the 2 threaded inserts at the top of the printer and the twist-in spool post that comes with the printer. These inserts are 30-31mm apart and are perfect for this type of…

Pobrania
1050
Polubienia
83
Ocena
5
P
PrintablesWARXion

Anycubic Kobra 2 Neo - Toolbox Organizer

Keep it as close to the screen as possible otherwise it can interfere with the Z axis. I recommend printing it slanted, to reduce support material need. Category: 3D Printer Accessories

Pobrania
1040
Polubienia
112
Ocena
5
P
PrintablesMediaMan3D

Ender 3 V2 Neo X Carriage Model

For designers to make custom print head and other mods for the X carriage assembly on the Ender 3 V2 Neo Update 4-15-2023 12PM PDT: Uploaded STEP file version of this X carriage. IMPORTANT NOTE. This was created from detailed calipered…

Pobrania
1015
Polubienia
96
Ocena
0
P
PrintablesTOKENIZER

osVAC neo F32H32-withSlipring + step + Fusion 360

F32H32. Is smaller than osVAC-original. I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…

Pobrania
993
Polubienia
59
Ocena
5
P
PrintablesAnanords

Neowave - RGB WiFi Moodlamp

The lamp is mostly 3D printed, and is easy to assemble. It uses an array of WS2812B individual addressable RGB LEDs, which gives it the ability to not only show every color, but also in different effects, like simulating a fire. All of…

Pobrania
977
Polubienia
307
Ocena
4,8
P
Printablesnavi_1103

Top spool holder for Anycubic Kobra 2 Neo

Top spool holder designed for anycubic kobra 2 neo. Should work for the base kobra 2 and the pro. Took inspiration from @auroratechchannel's design:…

Pobrania
977
Polubienia
84
Ocena
5

Anycubic Kobra 2 Neo Orca Slicer Profile

As requested from you lovely guys… This profile should help you achieve the same fantastic results I have, without compromising on quality and is based on my Prusa profile for this same printer. You can easily adjust settings like…

Pobrania
961
Polubienia
53
Ocena
5
P
PrintablesTuffLucky

( HEAT SOCK COMPATABLE ) NOOZLE COOLING AIR DUCT FOR ENDER 3 NEO / ENDER 3 V2 NEO

Lowered down fan so the heat sock can fit in without pressing against the fan duct (does require some support for a decent print, I recommend using tree supports and using them on baseplate only, this is up to you though) Original:…

Pobrania
958
Polubienia
106
Ocena
4,91
P
PrintablesFreshPrints

Anycubic Filament Sensor Support for Kobra 2 Max / Kobra 2 Pro / Kobra 2 / Kobra 2 Plus / Kobra 2 Neo

Simple support to fix the issue with only having one screw mounted in runout senor. Will keep sensor in alignment. Keep sensor from moving back and forth causing unneeded friction.

Pobrania
950
Polubienia
161
Ocena
5
P
Printablespetkata

Ender 3 V2 Neo Tool holder

Remixed supportless tool holder for the scraper and cutting pliers for Ender 3 V2 Neo. Printer Brand: Creality Printer: Ender 3 V2 Neo Rafts: No Supports: No Resolution: 0.2 (or bigger) Filament: PLA

Pobrania
946
Polubienia
125
Ocena
5
P
PrintablesAndrew Fiorello

Ender 3 V2 Neo X Axis Camera Mount

This is a webcam mount for an Ender 3 V2 Neo printer. It's made to press fit over the X Axis bracket and belt cover on the right hand side of the printer while leaving access to the belt tensioner knob. You'll need a screw to mount the…

Pobrania
942
Polubienia
94
Ocena
4,83
P
PrintablesVY5E

Ender 3 V2 Neo tool holder

Ender 3 V2 neo tool holder remixed from Mattwall's design (https://www.thingiverse.com/thing:3877505)

Pobrania
936
Polubienia
116
Ocena
5

Motorola Moto Edge 40 Neo Case

Hey! Here is a 3D model for the “Moto Edge 40 Neo” cellphone case. You can find a flat model on DWG and STL so you can modified the file and as example you can find a Tesla Case. Printed on TPU, 0.1mm layer height , 40% infill, supports…

Pobrania
917
Polubienia
32
Ocena
4
P
PrintablesFreshPrints

Anycubic Silicone Mod & Bed Spacer Mod , Parametric Shims and Spacers for Kobra 2 Max , Pro , Neo , Plus

Dial your bed In. Parametric Shims work with your Stock Hard Spacers and Silicone spacers found on AliExpress or Amazon Premade Shims for Stock Factory Spacer and Silicone Spacer if you don't want or need to adjust the size. No worries…

Pobrania
916
Polubienia
158
Ocena
5
P
Printablesthat1guy

Kobra 2 Neo Orca slicer profile

all the profiles I found were not up to my standards from prusa slicer so I made my own

Pobrania
914
Polubienia
26
Ocena
5
P
PrintablesDannyD

Slot Covers for Ender 3 V2 Neo

I have these covers in so many colors and they make my printer look great. It also helps with keeping your printer clean. I printed them at 0.16mm and 0.20mm layer height.

Pobrania
910
Polubienia
120
Ocena
4,92
P
PrintablesLH

Rogue Orbiter - V6 Orbiter 2 Tool Head - Ender 3 V2 Neo

Rogue Orbiter Tool Head design for the Ender 3 V2 Neo based on the E3D V6 mount (Revo Six, Dragon SF, HF, Dragonfly BMO) and the Orbiter v2.0 extruder. Battle tested and heavily iterated. This is my sixth complete Tool Head design for the…

Pobrania
904
Polubienia
288
Ocena
5
P
PrintablesFreshPrints
Pobrania
898
Polubienia
157
Ocena
5
P
Printablesswablab e.V.

osVAC M32-R35 (osVAC Neo)

Thanks for Hobbyhimmel for inventing this system: https://www.ossso.de/osvac/

Pobrania
895
Polubienia
36
Ocena
5
P
PrintablesCsaba Baráth

Anycubic Kobra 2 Neo - OrcaSlicer Profiles

since there was no profile for the Kobra 2 Neo in OrcaSlicer, I created one for it. more things can be set here, even compared to the prusaslicer. In this gcode, you already draw the cleaning strip at the back, as with the Kobra 2 Pro…

Pobrania
886
Polubienia
63
Ocena
0
P
PrintablesNeozoen

Neo print in place Box

I designed a small box to store some stuff from work. Inner dimensions: 63mmx60mm70mm (HxBxT). The cover latch is made for 5x1mm magnets. Print Settings There are small forms on the cover to make custom brims for better bed adhesion.…

Pobrania
858
Polubienia
166
Ocena
4,5
P
PrintablesMaker's Ark

Anycubic Kobra Neo fan duct

Circular fan duct for Anycubic Kobra Neo

Pobrania
855
Polubienia
79
Ocena
4,44