Liczymy pasujące modele…
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Apple introduced the Magic Keyboard with Touch ID in 2021 for Apple Silicon computers rocking an M1, M2, etc. That's all well and good, but for those that preferred keyboards that are actually good, many resorted to taping Apple's…
Wydruk około 1,59 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a set of different-sized touch screen pens for resistive touch screens. Uploaded right now are models with tips sizes 2mm, 3.5mm, and 5.5mm depending on your specific need. All designs are 110mm long and have a hole on the end for…
Wydruk około 2,37 €–2,90 € nettoWstępna wycena jednego wariantu
Ein Mikrofon mit Ständer und abschraubbarem Kopf zum Verschenken von Eventgutscheinen. A microphone with stand and unscrewable head for giving away event vouchers. Print instructions Gedruckt in PLA mit 0,2mm Schichtstärke. Länge: ca.…
Wydruk około 2,36 €–2,88 € nettoWstępna wycena jednego wariantu
I wanted a wall mount that would hold the Quest 3's controllers without risk of them slipping out or getting damaged. Settings used: Layer Height = 0.20mm Walls = 3 Infill = 20% Supports = On Brim = On Small amount of support required for…
Wydruk około 3,48 €–4,25 € nettoWstępna wycena jednego wariantu
LCD cover that works with the awesome Hyperpixel 4" touchscreen. No fitment issues from other similar covers. This is for: MK3/MK3S/MK3S+ Letters stl is also included if you want to make this a multi color print. Update 2021-02-06: I made…
Wydruk około 5,93 €–7,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This version is fixed to the Ender 3 v2 X-Carriage using the two upper roller wheel screws instead of the BLTouch mounting holes. Remixed from: Biqu H2 Mount + Cover - Ender 3 CR10 https://www.thingiverse.com/thing:4740250 BIQU H2 Ender 5…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
This is somewhat a remix of a remix. Crosslink did a remix for the Ender 3 V2 of 3D_LC's mounting plate . I didn't like to use the roller screws to mount this neither did I have any use for the cable routing channels as they can only be…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena jednego wariantu
This is a modification: https://www.thingiverse.com/thing:5146836 The original was too tight and the cartridges did not fit. I printed 0.3 (because I wanted it fast), but 0.2 is better. Tape 6mm = Tape 9mm = Tape 12mm. PLEASE SEE MY OTHER…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
My friend bought a Raspberry Pi 7 inch Capacitive Touch Screen HDMI Monitor. He wanted a case and stand for it. I found a case for a similar monitor and remixed/remodeled it to fit. I made a lot of improvements to the case for printing…
Wydruk około 1,97 €–2,40 € nettoWstępna wycena jednego wariantu
LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…
Wydruk około 6,22 €–7,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement LCD cover that provides a mount for the excellent 4inch HyperPixel capacitive touchscreen. The screen slides under the holding clips snugly, gently bend the part to slot the screen under the second set of holding…
Wydruk około 6,23 €–7,62 € nettoWstępna wycena jednego wariantu
A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. Designed to use the M2.5 x 6mm screws included with the…
Wydruk około 5,70 €–6,97 € nettoWstępna wycena jednego wariantu
Here is a nice cozy well-loved leather couch. It's like the one we all had growing up that was nice and broken in to the perfect level of comfortable. Recommended print settings Layer Height: 0.2mm or less No supports needed This is a…
Wydruk około 2,95 €–3,61 € nettoWstępna wycena jednego wariantu
*** New case for Raspberry Pi Touch Display 2 *** Required models from 7" Touchscreen case for Raspberry Pi 4 + internal fan Display case >> rpi4-display-case Stands >> rpi4-stand Fan mount >> rpi4-fanmount Print instructions See 7"…
Wydruk około 1,83 €–2,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE Added a slot in the top half for Raspberry Pi Camera module https://youtu.be/lVM0vg\_LYkY Learning Guide: https://learn.adafruit.com/3-dot-5-pitft-octoprint-rig/overview OctoPrint & Raspberry Pi This project adds a touch screen…
Wydruk około 6,26 €–7,65 € nettoWstępna wycena jednego wariantu
I designed yet another No Touch Tool, did it retractable because if the areas that may touch contaminated surfaces are not enclosed somehow they may contaminate others like your pockets or your hands after it has been use. This tool is…
Wydruk około 4,82 €–5,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Plate mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version , 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan . Features Thread inserts Display…
Wydruk około 3,61 €–4,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 5 *** New case for Raspberry Pi Touch Display 2 *** NEW: Alternative slim version for the new Raspberry Pi Active Cooler Required models from 7" Touchscreen case for Raspberry Pi 4 +…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Wydruk około 16,29 €–19,91 € nettoWstępna wycena jednego wariantu
Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen. Line the bottom of the mount base flush to the bottom of…
Wydruk około 4,12 €–5,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The shown rollbar frame was sliced using the standard 0.15mm settings from Prusa Slicer and printed using Prusament PETG. The left and right side were printed separately without any support. If you are advanturous, you could try the…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
V-Slot profile 2020 mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version , 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan . STL-Files for…
Wydruk około 2,97 €–3,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple bolt used to hold the screen in place for the Gaggiuino
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Bouchon lave-glace de remplacement pour Renault Scenic III phase 2 (2012 dans mon cas). Le bouchon a un diamètre de 50.5mm, il pourra se visser et rester en place. Parfois un peu de mal au début à trouver le bon angle, mais ne vous en…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
EN : My girlfriend and me gonna search a tissue box with 2 compartments for our TV remote but never find the desired one, I made it myself this model to store different remote standing up to have an easiest way to catch it and to limit…
Wydruk około 33,93 €–41,47 € nettoWstępna wycena jednego wariantu
Angled stand (22.6 degree elevated) for a Behringer X TOUCH ONE control surface.
Wydruk około 2,49 €–3,04 € nettoWstępna wycena jednego wariantu
Re-modelled and extended to cover the battery hat I use.
Wydruk około 3,47 €–4,25 € nettoWstępna wycena jednego wariantu
Touchscreen stylus with hanging loop
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
This model is not difficult to print, but it is rather difficult to use. First, you need a TTP223 touch sensor (very cheap on Amazon) that will fit nicely in the center of the switch. Then you need to solder a 28awg wire to the sensor in…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
A mount for Elecrow 5" touch display for raspberry pi ( https://www.amazon.com/dp/B07FDYXPT7 ) suitable for use with octoprint/octodash or other purposes. This is a remix of my console for the Adafruit 5" touchscreen with mounting points…
Wydruk około 3,09 €–3,77 € nettoWstępna wycena jednego wariantu
The Modular Air Duct system is exactly what I was looking for my BIQU H2. However I had a Creality CR Touch instead of a BL Touch. This printable is remix of the BL Touch in order to support the different connection port of the CR Touch.…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is especially designed for Tropicana © juice bottles and allows you to recycle them into a good size watering can for your seedlings or indoor plants. The whole thing can be printed in PLA, but for a better seal, I recommend…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
I have my 7" Raspberry Pi Touchscreen oriented vertically which does not work well with the original case design. Uses 4 M3x12 screws to attach using same mounting holes as the case. Made to provide access to all necessary ports, but USB…
Wydruk około 3,66 €–4,48 € nettoWstępna wycena jednego wariantu
This single cupholder / bowl holder / remote holder / phone holder keeps everything you need within reach while chilling on the couch. Also works with Mugs! I printed in PLA & PETG with 3 perimeters, support cubic infill. If you decrease…
Wydruk około 13,38 €–16,35 € nettoWstępna wycena jednego wariantu
This is a desk stand for the “TouchBar” generation of MacBook Pros to run them in clamshell mode (i.e. with closed display). This should fit any 13" and 15" MacBook Pro with TouchBar (including the M1/M2 13" models). It will definitely…
Wydruk około 6,86 €–8,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The touchscreen stand from McMatt ( https://www.prusaprinters.org/prints/15208-raspberry-pi-touchscreen-stand ) is great, but unfortunately only for one orientation of the screen. I have adjusted the support lip of the screen and the…
Wydruk około 3,29 €–4,02 € nettoWstępna wycena jednego wariantu
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4. Should point out that the source CAD file is not my own work. Also that this is probably quite inefficient in terms of filament usage What I did modify was to make the slot for the…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
This is a mount to attach the Waveshare 7.9" capacitive touch display to the front of a Voron 0.2 (it may also work for the 0.1 or 0 but since I don't have those I can't confirm that). The mount points are designed so that they don't…
Wydruk około 3,05 €–3,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
cruise control for bikes without it, for 22 mm handlebars but you can scale it. i have not printed it so i dont know if it will work in pla. i reccomend putting some tape or something rubber on the handle bar to not damage it.
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
its a little tool for people that need a holder for their hammers on their belt. i printed in 02mm and its quite strong. it does need support under the clip because its not down to the ground due to a math mistake that i have not fixed it…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
A mount for a 5015 fan in combination with a correct adjusted fan duct. Its made for Artillery Sidewinder X2 (maybe it is also compatible for X1 and Genius Pro). It's made of 2 parts - a front and a back part. Both are easy to print (but…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
The side sections of a Leatherman are useful to hold additional tools such as saw blades, a pen or the bit extender but I always found they would fall out. So, I designed this simple holder with just enough clearance for the blades and…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wer häufig eine Nasendusche verwendet, macht dies üblicherweise mit 0,9 prozentiger physiologischer Kochsalzlösung. Diese kann man teuer kaufen oder einfach selbst herstellen: 9 gramm Salz (idealerweise naturbelassen ohne Rieselzusätze)…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this model for the following reasons: Most mounts available are not made for use with Volcano. This design has the BL touch mount height appropriate for the additional length of the Volcano. The mounts that use the roller bolts…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
Durch den Trenner und den Einsatz gleiten jetzt die AEP Magazin ganz leicht herein und raus. Kein fuchteln und wühlen mehr, sicherer Sitz im Magazinhalter. Es passen zwei Magazine rein und auch gemixt. zwei kurze zwei lange ein kurzes und…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
Edit: THIS MODEL HAS BEEN MOVED FROM THIS SITE It can no only be found here: mmf.io/o/138678 --------------- This couch shaped puzzle box is a 10 piece puzzle box. It's a fairly easy print with only a few supports needed. Assembly doc and…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
Remix of BLTouch Cover w/bottom light block to work with Satsana 5015 Fan Duct with BLTouch Shortened the top and flattened the round protrusion. Print Settings Printer: Creality Ender-3 v2 Rafts: Doesn't Matter Supports: Doesn't Matter…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
This a couch leg with a height of 95mm. The couchleg+modifier version I included, has more infill at the screwholes.
Wydruk około 8,86 €–10,83 € nettoWstępna wycena jednego wariantu
WATCH IN ACTION: https://youtu.be/DJhv8JvJUME WHY: This was made to be able to touch objects such as buttons or electronic screens that might have been in contact with bacteria or viruses such as COVID-19. With research such as…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Cerf Foret - 5 layers (modular) Dimension of a layer: 90x1mm Support spacing: 5mm between layers Layer 0: bi-color - yellow / black Cerf Foret - 5 couches (modulable) Dimension d'une couche : 90x1mm Support espacement : 5mm entre les…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
A mount for Adafruit 5" touch display ( https://learn.adafruit.com/adafruit-5-800x480-tft-hdmi-monitor-touchscreen-backpack ) suitable for use with octoprint/octodash or other purposes. Note, if you're looking at buying a touchscreen, I…
Wydruk około 3,09 €–3,77 € nettoWstępna wycena jednego wariantu
Beginner Flute Key Plugs
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Fabriqué pour un Lave vaiselle Indesit DFG254BSFR. Peut convenir à d'autres modèles
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
IMPORTANT NOTE: Please only use a flexible filament. I used an 89A Shore Hardness PLA from Ataraxia. If made of ridged PLA, PETG, ABS, etc., and the tuck comes partially out of position and is sticking out, it will will impale you. Trust…
Wydruk około 3,57 €–4,36 € nettoWstępna wycena jednego wariantu
The TC420 and TC421 are very nice and relatively cheap LED controllers for fish tank / aquarium lights. However, there is no cover at the connections, so I created a two-piece cover. The lower part will be screwed in permanently. The…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
If you happen to have the same bike bag that I have ( Brand: “Wild Man”, model: V31 ) then you might have run into the same issues that I did. The mounting plate is fairly thin and weak, and can crack due to impact. This is a replacement…
Wydruk około 3,98 €–4,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My 3D-printer is connected to a socket distributor with switches. To protect the switch against unintentional touch, I designed this protector. It has to be glued around the switch.
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made an attachment for the OrbitKey mat system for the Clickable TouchID case ( https://www.printables.com/model/355924-c ). Needs 5x 6x2 magnets to make it stick to Orbitkey desk mat rails I printed in PETG, but no reason any other…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For Esun little box 1.75 mm mouthpiece Pour Esun little box 1.75 mm embouchure
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Basic board cover allowing to select the right button by touch to control Advanced Filtration System or White LED Strip . Printing does not require supports. I have added two project files that allow for further easy fine tuning of hole…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by models already published on the contest page, here are three tools for grabbing pens, turning on the lights, and opening (most) cabinets. Enjoy! Print instructions Print with supports everywhere if you want to ensure good…
Wydruk około 1,95 €–2,39 € nettoWstępna wycena jednego wariantu
Nom du Modèle : Clé de Démontage Compartiment Sel Whirlpool Description : Dites adieu aux tracas du démontage du compartiment de sel de régénération de votre lave-vaisselle Whirlpool. Notre clé spécialement conçue rend cette tâche…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction: I use openHASP at several wall switch locations in my home for scene, light and appliance control via Home Assistant . I find it cumbersome to touch the 2.4 inch ILI9341 touchscreen at the correct spot, and I am sure I am…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Distributeur de recharge Gel douche 900 Care
Wydruk około 6,79 €–8,30 € nettoWstępna wycena jednego wariantu
Bonjour, Ce sont les caches des trous des 4 vis de fixation de mon frigo dans mon camping car. Le camping car est un Rapido et le frigo est un Electrolux RM 4230. largeur extérieure 20mm, largeur axe 9.5mm Belle journée. MC
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you'd like to sell my model for your own business, please consider supporting me and acquiring a licensed version of the model here: Licensed Model on Patreon If you like this model, please consider printing the full sized semirobot…
Overview A simple enclosure for the xtouch P1P/S interface by xperiments: https://github.com/xperiments-in/xtouch This version houses the ESP32 touch screen in a way that replaces the standard printer controls, but swivels up out of the…
Make sure to choose the correct plate version for your funnel (plate_GC_revised or plate_GCP_revised) Fasteners (to attach touchscreen housing): 2 M4x10 button-head screws 2 M4 nuts Loctite 242/243 or equivalent Recommended Print…
These cabinet knobs are pleasant to the touch thanks to spiral narrow ribs all around. There are five basic shapes (3 bigger and 2 smaller) in the back-mount version (A1, B1, C1, D1, E1) and same in the front-mount (A2, B2, C2, D2, E2)…
3DCREATION This is a remix of Satsana fun duct optimized for use with stock fans. UPDATE --> VERSION v2 WITH MORE SPACE FOR X ENDSTOP Main benefits of this model: no need for support easy to print weight 60 grams ready for…
Easy to print solid Raspberry Pi 2 or 3, Official 7 inch touchscreen case. I wanted to keep the black bezel look of the screen and not making it bigger. You will need 4 M3x6 or 8 screws to secure the back cover. There is room inside for…
This is a replacement backplate for the Creality Ender 3 S1/S1 Pro Sprite Extruder that moves the CR Touch probe inline with the nozzle on the Y axis producing a zero probe offset. Many people are having issues with automatic bed leveling…
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
Double Stack Mag Pouch for left hand loading. This is designed to work with ELS and now also Tek-Lok mounting systems. If you have a gun that I don't have a pouch for just measure the magazine with your calipers (LxW in 3 different spots)…
A simple cover for the SAGROTAN soap dispenser. By the way, you can find a shelf for wall mounting in my 3D models . IMPORTANT: YOU ARE NOT ALLOWED TO USE MY DATA FOR COMMERCIAL PURPOSE (E.G. for your ETSY or EBAY) WITHOUT MY CONCENT.…
Fixing the CR Touch Error on Creality 3D Printers Hello everyone, Recently, I encountered the common CR Touch error. After extensive searching on the internet and trying all the suggested solutions, I unfortunately didn’t achieve any…
Special features The Extruder Fan Cover can be removed independently (no need to also remove the BLTouch mount), thus maintaining the probe Z offset Optimized cable placement. Small and sturdy design. Updates 3 February 2023 - Lowered the…
Materials: Orange Brown Gold White Black Red Blue Yellow You will need glue for assembly. Most parts simply fit into each other, but some are better glued. In the updated file, the sofa and some other parts have been redesigned for more…
I needed a holder for my Brother P-Touch H100 to mount it to the wall or the side of a cabinet. As I didn't want to drill holes into the furniture I designed it with a hook that can be attached to the side of a cabinet - or as in my first…
The CAD files and renderings posted to this website are created, uploaded and managed by EA3D community member. This content and associated text is in no way sponsored by or affiliated with any company, organization, or real-world good…
ESP32 2.8inch Touch IPS CYD LCD Screen Case I recently purchase this screen from Ali Express. It has a very unimaginative name "ESP32-2432S028R" which makes it hard to find. For that reason it is also known as the Cheap Yellow Display CYD…
Reference model of the 7" Raspberry Pi Touch Display 2 based on the official drawings and measurements of sample unit. Provided in Solidworks (Original), STEP, and STL (with and without a Pi 5) Pi 5 model is not mine, it is from Elecrow .…
This stand is loosely based on some other simplistic designs I've seen for the original Touch Display, but it is based on the new dimensions of the Touch Display 2. It is a simple leg design that you print twice, and it has a cutout in…
The silicone tube/cartridge/cartouche cap helps silicone is not drying after usage See also the version with protector for cartridge and applicator: https://www.printables.com/model/1135314-protector-for-silicone-cartridgecartouche-applicat
This is the mount I designed to house a Raspberry Pi and display in the wall to control my Smart Home. The idea was to get a flush, professional-looking installation that makes the display feel like it was always part of the wall —…
I really liked Johnny_Lawrence's design for a PSA stand, its minimal, quick printing, and looks nice but CGC slabs are a bit wider and I wanted a matching stand. I modeled this in Fusion 360 using Johnny_Lawrence's PSA stand as a…
A small handheld spiky roller of sorts. Can be used in kink, for sensory purposes, or whatever else you want to use it for. This version has more spikes + a loop to attach a strong/lanyard.
The screen is held into the housing using 4 m2.5x8mm socket head cap screws. The housing attaches to the Voron 2020 rail using the default m3x8mm socket head cap screws. This screens screw pattern is too wide to accommodate the default…
Basic Description This is a remix of a CR-Touch mount. https://www.printables.com/model/255096-sprite-extruder-ender-s1-pluspro-cr-touch-mount-fo I redesigned it for my Ender 3 S1 Pro. Reasons for remix The original had its X-offset…
These models have been derived from the existing designs by Voron Design, thanks so much to the Voron Design team for the massive effort put into these excellent machines. Centralised BLTouch mod for Voron Afterburner (AB prefixed x…
Cat food pouches can be frustratingly hard to empty. This cute squeezer is here to save the day and do so in style! Made for: Felix brand pouches Slot dimensions: 95 mm x 2.2 mm Print time: ~1 hour Printer used: Creality Ender 3 v2…
Display case and stand for Raspberry Pi Touch Display 2 and Raspberry Pi 5 I have not tested with a Raspberry Pi 4 - it might need some tweaks so if this design is popular I'll do one that fits a Raspberry Pi 4. Easy to assemble - just…
Introducing the redesigned xLCD cover, seamlessly integrating the display flush with the front face for a sleek look. Equipped with a next-gen RGB LED diffuser and compatible with default Prusa xLCD printed supports. Tested on various…
This is a gridfinity native Brother P-touch TZe Label Tape storage box. This can store tape cartridge larger than 12mm.
Tired of using the disposable can you purchase you Nicotine or tobacco products in? Want to use something more permanent and stylish, look no further!! This design has a compartment for fresh Pouches and a small compartment for used ones.…
