Liczymy pasujące modele…
PHILIPS OneBlade - Compact travel case 🔑 Key Features: Easy to Use - No Assembly, No Supports, just print and use. New and Original Locking system – Custom designed locking mechanism keeps the case secure, in addition the printed…
Wydruk około 9,12 €–11,15 € nettoWstępna wycena jednego wariantu
This is an articulated dolphin - Clipper. It is flexible, requires no supports, and was designed to be printed in place. Recommended print settings layer height: 0.15 mm infill: 10% gyroid perimeters: 3 supports: no The fin should be…
Wydruk około 2,97 €–3,63 € nettoWstępna wycena jednego wariantu
A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Philadelphia Eagles Logo 1st Layer Gray 2nd White 3rd Green 4th Black
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
Dolphin necklace A nice little gift which takes less than 30 minuets to print. Uses less than 1g of filament The model is small so unless a printer is set up perfectly stringing can be present. Some time and care after printing may be…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
A smooth and playful FlexiMania dolphin with clean articulation and natural body flow. Designed to print straight off the build plate with beautiful flexible movement and zero supports required. Perfect as a desk toy, fidget model, gift,…
Wydruk około 12,47 €–15,24 € nettoWstępna wycena jednego wariantu
Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…
Wydruk około 8,09 €–9,88 € nettoWstępna wycena jednego wariantu
A cluttered sink, a dangling charger, a trimmer awkwardly balanced on the edge… sound familiar? This is exactly the kind of daily hassle that inspired me to design this socket-mounted Philips OneBlade holder. Thanks to real-world use and…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
Customized version of https://www.thingiverse.com/thing:193647 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=193647 Customizer Parameters type = bolt head_type = countersunk drive_type = phillips…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
3D printable wall mount for Philips Hue Motion sensor , give a little bit wider rotation angles, and allows easy battery changes while keeping the mount aligned to the correct direction. Check out all the mount options . The mount is…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Philips Hue Lightstrips make good TV backlights, but I had trouble mounting them facing directly towards the wall and bending them downwards near the edge of the TV. This simple part helps to hold them in place and keep them flat, while…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was looking for some proper stand for my new OneBlade. Originally I was inspired by this thing by xenotrim: https://www.thingiverse.com/thing:2986584 Thank you xenotrim! https://www.thingiverse.com/xenotrim/about It was not exactly tha…
Wydruk około 10,68 €–13,06 € nettoWstępna wycena jednego wariantu
Miami Dolphins Logo 1st layer white 2nd Blue 3rd Black 4th Orange
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Phineas and Ferb
Wydruk około 11,70 €–14,30 € nettoWstępna wycena jednego wariantu
This remix will hold a majority of the Philips Multigroom MG7750 accessories. I wanted a tray that would hold both the smaller beard guards as well as the larger hair guards. This was created using @Scatterthought's modular files. I used…
Wydruk około 5,04 €–6,17 € nettoWstępna wycena jednego wariantu
Philipoemen - Greek General Fixed 1/31/2024 - removed old files. Philopoemen /ˌfɪləˈpiːmən/ ( Greek : Φιλοποίμην Philopoímēn ; 253 BC, Megalopolis – 183 BC, Messene ) was a skilled Greek general and statesman, who was Achaean strategos on…
Wydruk około 12,93 €–15,80 € nettoWstępna wycena jednego wariantu
Shaver stand for Philips 3000 series shaver (mine is a model 3333). Print instructions Prints without supports. Optional STL for feet included to raise the stand and allow water to drain underneath it.
Wydruk około 0,83 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Scale the model up or down based on your bite preference :). If you add your name on the plate, it can make a nice PF or christmas gift. For more silly cookie shapes visit my cookie cutter collection .
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the original model by fabrik872 : https://www.thingiverse.com/fabrik872 Original model site: https://www.thingiverse.com/thing:3693224 Chernobyl graphite block from inside the reactor RBMK with fragment version.…
Wydruk około 6,49 €–7,94 € nettoWstępna wycena jednego wariantu
Had success printing it in ABS, PETG was to weak and snapped.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Easy to print medals to celebrate first, second and third place. Possible to do color change to emphasize the numbers on the medals. I used Oh my Gold, Galaxy Silver and Viva la Bronze (all PLA) for the different medals on 0,2mm Quality…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
Holder for Philips Hue Bridge v2 to the SKÅDIS pinwall. Model is very fine and flexible (only 1mm walls). There is no weight to support. I didn't add the locking pins - it's held down by the cabling. Needs supports to print. The supports…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Philips Hue Play Wallmount Great wall mount that mounts to the original hole under the play device. The base is tilted about 65 degrees to give a softer light on the wall than the original. It puts the play 70mm from the wall and attaches…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
This is a remix, the original model was made for ~35mm nozzles and didn't fit my 32mm ones, so I decided to create my own version of it. The diameter of the tip is 31.4mm and it increases to 32.2mm , it friction fits very nicely any 32mm…
Wydruk około 3,65 €–4,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the missing travel box for the Philips Sonicare toothbrush head. No more filthy toothbrush heads in your travel bag... I like the slanted design... Let me know when you made one! Print it upright, with no support. It's advisable…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order Start with Red, then Black. Before you ask, the 66 is supposed to be crooked. Quick Guide…
Wydruk około 3,04 €–3,71 € nettoWstępna wycena jednego wariantu
This cute Dolphin in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Here I have created a small angled mount for Philips Hue motion sensors. The mount is meant to be used together with the original mount. It should be possible to fix it with a screw or some kind of glue. For my picture I used an adhesive…
Wydruk około 0,54 €–0,65 € nettoWstępna wycena jednego wariantu
6-5th century BCE silver coin from the Greek city of Cyrene : Silphium and Magas
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Border fixed manually, point by point. Total surface 10500 Km2 → 99% accurate. Z exaggerated x3.
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
Coin with the silhouette of a dolphin engraved in it. Uses art from PublicDomainVectors.org .
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Die Station wurde in Pla auf dem Prusa MK4S gedruckt. Andere Filamente wie PETG und ABS funktionieren natürlich auch. Die Anti-rutsch Unterlagen sind in TPU gedruckt. Verwendet wurde eine Schichthöhe von 0.25mm, 15% Infill und…
Wydruk około 5,61 €–6,85 € nettoWstępna wycena jednego wariantu
Introducing the new MatterHackers mascot: Phil A. Ment! Designed with troubleshooting in mind, Phil has several features specifically to put your printer through its paces. These features include: small inset details, small embossed…
Wydruk około 1,99 €–2,44 € nettoWstępna wycena jednego wariantu
Eine alternative Babyphone Betthalterung für das Babyphone Philips Avent SCD845/26. Sollte die V.1. einen zu steilen Winkel haben kann diese an der ggü. Seite des Babybettes installiert werden. See also my other bed mounts:…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
This model represents a reinterpretation of a classic Zen sand garden. As a 3D printing enthusiast, I am captivated by the distinct lines that this manufacturing method leaves on the models. In this design, we have replaced the lines in…
Wydruk około 2,81 €–3,43 € nettoWstępna wycena jednego wariantu
These herringbone spur gears fit the National Geographic Professional 2 Pound Rock Tumbler Kit , which is known for being much too fast compared to other popular tumblers on the market. This gear reduction slows the speed from about 80-85…
Wydruk około 3,16 €–3,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modified original, making sides symmetrical. The original has different dimensions on each side. Optimized for Inmotion V10(F) - shorter and narrower. You can freely stretch the width of the model to fit your EUC. You can not stretch the…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu
Created from a GIS downloaded model and scaled down for 3D print
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
This lid covers the ground coffee bypass for Philips Saeco 1200/2200/3200 series superautomatic espresso machines. Fits the same space as replacement part number 421944084601, but this has vents shaped like a dog and cat instead of…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Removed the rest of continental Europe and left the Island of Ireland on its own. Added multiple colour changes to make the model pop.
Wydruk około 4,28 €–5,23 € nettoWstępna wycena jednego wariantu
I printed the Philips Sonicare Toothbrush Travel Case by Ohuf but the cap was too loose and it wouldn't stay in place. After printing a few variations of the cap that just wouldn't fit right, I decided to create a model in OpenSCAD. I…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…
Wydruk około 3,67 €–4,48 € nettoWstępna wycena jednego wariantu
A stylish dock for your Oneblade QP2724 with snap in charging feature - keeps your OneBlade ready for action anytime!
Wydruk około 3,39 €–4,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cleopatra VII Philopator and her Daughter Cleopatra Selene II Cleopatra looks like she is having a Minor TIA. may need to get back to that. Cleopatra VII Philopator, the last active pharaoh of Ancient Egypt, was a legendary figure in her…
Wydruk około 20,10 €–24,57 € nettoWstępna wycena jednego wariantu
Small and functional Philips Sonicare 3 Series Stand. Facebook link https://www.facebook.com/Design-Additive-Manufacturing-services-335572977070508/ Print instructions Category: Bathroom
Wydruk około 3,45 €–4,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Freestanding or can be attached to a surface with mounting tape. Version 1a This is a fraction larger to fit the older Sonicare models (I did have a Sonicare HX8911/04 that I bought in 2017 that slightly bigger). Our newer Sonicare 4300s…
Wydruk około 1,61 €–1,96 € nettoWstępna wycena jednego wariantu
Xenomorphic Alien Helmet Probably will need to be cut into quarters to make it big enough for an adult head. The interior cut out is probably mostly useless for head conformity… but it may fit Nicley over a Mohawk.
Wydruk około 38,39 €–46,92 € nettoWstępna wycena jednego wariantu
A stand for the Philips OneBlade + Philips NT3650/16 S and its standard accessories.
Wydruk około 4,04 €–4,94 € nettoWstępna wycena jednego wariantu
This is an adapter plate for the Philips Hue Dimmer v2. It fits on Busch Jaeger wall switches using only the clip of the switch. It is a remix of https://www.thingiverse.com/thing:2905340 by Hoelle and…
Wydruk około 4,34 €–5,30 € nettoWstępna wycena jednego wariantu
Elevating express legs, it's easier to keep clean under it and you can see when it leaks. Very easy to print. Easy to resize. One time my express start to leak. it was hard to find it. When i printed that legs i found leak. Now i use it…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
!! Print at 3x scale, else tolerance will be incorrect !! The following datasets were used: height model: swissALTI3D landscape model (Buildings): swissBUILDINGS3D 2.0 Steps: Combining the height model and the landscape model into a…
Wydruk około 7,12 €–8,70 € nettoWstępna wycena jednego wariantu
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Držák na holící strojek Philips MG7720 s možností připojení nabíječky. Vytištěno s tryskou 0.6,…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
KCD2 Inventory stand for Phillips OneBlade Im so excited to introduce my take on the Philips OneBlade & KCD2 contest. The organizer is clearly inspired by the inventory from the legendary Czech game Kingdom Come: Deliverance II . But…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
This 3D-printed Caesar Cipher Ring is an educational and functional tool to encode and decode messages using one of the oldest known ciphers. Here are the key characteristics for your printable description: 3D-Printed Caesar Cipher Ring…
Wydruk około 2,86 €–3,49 € nettoWstępna wycena jednego wariantu
Typographic Stencil Ruler for Markers and Sharpies Description: This versatile typographic stencil ruler is designed for use with markers, Sharpies, and other broad-tip pens. It features characters from the Pauza Stencil typeface,…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
I needed wall hang for company usage so I share it also here :) I hope you will like design of it. I used PLA 0.2 and 5% of infill. You can screw it to the wall using M3 screws or use strong double-sided gorilla tape.
Wydruk około 8,11 €–9,91 € nettoWstępna wycena jednego wariantu
A Mount for Philips Hue wireless motion sensor. Its designed to mount the Hue motion Sensor unter a shelf or ceiling. Extra parts M3 8mm countersink screws and M3 nut.
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Replacement parts for SpeedPro
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Philips OneBlade Travel-box with stand A small box with a lid where the accessories are stored. https://amzn.eu/d/ivvry3F
Wydruk około 7,71 €–9,42 € nettoWstępna wycena jednego wariantu
This is a custom-designed charging stand for the Philips MG5720 trimmer that does more than just hold your device. It features a unique lever-actuated mechanism that lets you hide or reveal the charging connector , helping you avoid one…
Wydruk około 8,75 €–10,69 € nettoWstępna wycena jednego wariantu
What This is an angled mount for the Philips Hue Interior motion sensor. It includes an screw base which can be turned to the right angle and fixed to the wall. The Sensor mount is connected with its original magnet mount which screws…
Wydruk około 5,25 €–6,42 € nettoWstępna wycena jednego wariantu
Video : Single-piece, printed U-channel for Phillips, Smart, RGB LED strips. Voice commands Compatible with Google Voice and Alexa ! I specifically used the Phillips WIZ LED strip system because it comes with a 12V power supply and a push…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
Anti Vibration Feet for PHILIPS EP2231 Coffee-machine. Makes it a lot more quiet. Printed with PLA. Supports recommended.
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
This minimal case protects the Philips Multigroom 3000 (MG3750/60) from accidental activation and covers the blade, clicking securely into place. It’s especially useful when travelling, keeping your trimmer safe without adding bulk. The…
Wydruk około 0,68 €–0,84 € nettoWstępna wycena jednego wariantu
Eurocopter AS365N3+ Dauphin Helicopter Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
This is Philips OneBlade holder.
Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I found a way to generate topographic maps from saetlite data, then used prusaslicer 2.7 to emboss a track map on it that matches the curves of the hills in the area. the result is a 3d printable topographic track map The finish Line is…
Wydruk około 6,15 €–7,51 € nettoWstępna wycena jednego wariantu
As many do, I broke my balsa motor mount and need a stronger one. Similar to others I found, but using M3 threaded inserts instead of nuts or direct threading. Adapts to my motor plate (the stock one) at 16mm x 16mm.
Wydruk około 0,63 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This remix will store a few of my most used accessories for a Philips 3750. This will take up less space on the countertop. I used a few of the modular parts included in @Scatterthought's model and imported and arranged them in OpenSCAD…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
I'm printing them in regular Prusa PLA, without support and a layerhight of 0,3. To get rid of visual seams, set the Seam position under Print Settings to Random . I have included til Fusion360 and the STEP file if anybody would like to…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
Printed with Anycubic Mega X 1,75mm PLA 190°C 100mm/s Printspeed normal support 0.8mm Nozzle Holder for 22mm wood
Wydruk około 6,93 €–8,47 € nettoWstępna wycena jednego wariantu
EN : Holder for Philips toothbrush with elimination of the stability problem of the brush head support. Material : PLA Layers : 0.1 - 0.2 (0.1 looks better) Supports : no See also:…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
This is a customizable base that works with any of Flowalistik's Trophy set cups. Base and plaques are easy to scale. I found printing everything at 300% made for an ideal trophy size. Once you print the base and plaque, head over to…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed for the " Philips OneBlade & Kingdom Come ⚔ " contest, this case combines medieval aesthetics with modern functionality. Whether you're a humble blacksmith's son or a knight on a quest, this case ensures your grooming gear is…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
The diameter of the retaining circle is 70.82mm. The fixing holes are 5mm. In the photos I fixed the support temporarily with Patafix / Blu-Tack Print in PLA, 0,15mm, with support
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
Introduction This is a replacement cartridge for the Philips Cleaning Pod model AC52/01 . It is not a copy of the original cartridges, but is designed to be fully compatible with the original Cleaning Pod, and optimized for easy 3D…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
The Philips beardtrimmer BT9810/15 is a premium device but lacks one important feature - a stand! So when there is no thing I have to design and print it. With this design you get a stand for securely storing your BT9810/15. And you get a…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recently got a Philips "The One" TV and a TAB6405 sound bar, each comes with a remote. I wanted to have them mounted on the frame of my bed but you can wall mount them as well. The holes for screws are 3.5mm in diameter. Included .step…
Wydruk około 4,70 €–5,74 € nettoWstępna wycena jednego wariantu
This a Babyphone Camera Holder for the Philips Avent (Modell SCD923/26). It can be used to store the babycamand a powerbank, which can be used to power the babycam. Dimensions: Theoretically it can fit any babycam with a stand of 70mm.…
Wydruk około 12,49 €–15,26 € nettoWstępna wycena jednego wariantu
This power connector has been designed to fit the FM1000 series of VHF transceivers. This was a request from the Aberdeen Amateur Radio Society (www.aars.org.uk). The power connectors for these radios are very rare and hard to find, and…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
This model makes the Philips Avent DECT babyphone transmitter and receiver stand more stable on its ground as they tend to turn over quite easily, especially the transmitter unit with its stiff cable. This model consists of two parts: for…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
Der Bohnenbehälter verstopft immer die Schraube des Shredders. Für die Demontage bei Problemen immer ein Gefussel.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Surface mounting brackets for the Phillips Smartbright LED T8 series battens (~26mm wide body). Use PETG or similar for making the brackets flexible enough for the batten to snap-in No supports needed Increase perimeter count until no…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my design of a refillable capsule that works with the SmartClean system from Philips to automatically clean the shaver heads. As the JC301, JC302 capsules and the SmartClean system was replaced by a newer one, the original…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
La plaque est composée de 6 couches de 0.08mm imprimé en PLA. Je fais une pause après la première couche pour poser le tissus (un nylon avec des mailles à 125 μm). Je nettoies l'écran à l'alcool Isopropylique.
Wydruk około 5,00 €–6,11 € nettoWstępna wycena jednego wariantu
OneReachPrint – Adaptive Back Grooming Extension for Philips MG5720 – no tools, no hardware, just print and groom After developing the original OneReach , I wanted to revisit the design to make it even more accessible for home users –…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
The shade will limit the amount of light emitted by the light in the horizontal direction, essentially making it a spotlight. Designed for the Philips Hue E14 luster light bulb, though it might fit on other brands too. If you are printing…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Enhance your workspace organization with this meticulously designed surge protector mount. Tailored for the SPN7080 series, this mount offers a seamless solution to keep your power strip securely fastened under your desk, ensuring a…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN : With reference to my remix of the great model by Wollel I had the idea of reworking this remix for some time, as the plate could benefit from some additional stability in the long term. The competition brought this idea back to my…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Anamorphic 3D model of the Prusa approved designer badge.
Wydruk około 15,15 €–18,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Punic zoomorphic Askos (late 5th century BC) The use of this type of vessel was frequent among the Phoenicians, Greeks and Cypriots, being related to the afterlife. In Ibiza there are mainly representations of doves (symbol of the goddess…
Wydruk około 13,33 €–16,29 € nettoWstępna wycena jednego wariantu
Wie oben bereits beschrieben passt das neue Z12 Zahnrad perfekt in das Planetengetriebe des Philips HR-1366 Stab-Mixer. Gedruckt mit MK4 , 0,25mm Düse, 0,12mmQuali, 100% Infill, PLA (optimaler als PETG für Kleinteile), Stuetzen nur auf…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Delphi Temple - Candle Holder This 3D candle holder evokes the atmosphere of ancient civilizatino. The warm glow of the tea light in the center adds a suggestive and almost ritualistic touch, transforming any setting into a magical and…
Wydruk około 6,02 €–7,36 € nettoWstępna wycena jednego wariantu
A scale model of Gran Canaria
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Philips Rondo Gear
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Dimensions: 46.99 mm x 110.75 mm x 13.86 mm Parts Included: Graphics card Brand: Creality Printer: Ender 3 Filament: Overture PLA 1.75 mm Black Bed Temp: 60* C Nozzle Temp: 200* C Nozzle Type: .4 mm Infil: 10% Infil Type: Gyroid Supports:…
Wydruk około 2,23 €–2,72 € nettoWstępna wycena jednego wariantu
This a topographic relief map of the Wrangell Mountains. Much of the Wrangell mountain range in eastern Alaska is within the Wrangell-Saint Elias National Park and Preserve. They are almost entirely volcanic in origin and include the…
Wydruk około 12,35 €–15,09 € nettoWstępna wycena jednego wariantu
Affiliate Link (Hue Gu10) : https://link.amazon/B03H3JSlP Printed with PETG and TPU Try out the printed parts if they fit together before mounting Mount the Bracket first put the Buffer Ring onto the bulb corpus put the Bulb with the…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's a Philips Hue Dimmer Switch wall mount adapter for european households to replace the original, manual switch. Assembly tips: use 4 screws with 4 nuts and with 4 pads and screw it to the metal part (came from the blind cover) use 2…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena jednego wariantu
