750 modeli
I used the original model done by Seht 13. Find the original site: https://3dwarehouse.sketchup.com/model/5e76fb131fb4b6ae52470de2774d6099/MOTRICE-TGV-DUPLEX. I process the information such wat to be able to print everything on my Prusa…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
Installs into the secondary display port, just above the built-in network and USB ports. Requires: 4x M3x4x5 heat-set inserts 2x M3x8mm countersunk screws Also uses 2 screws removed from the original metal bracket Potentially worth…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
About The price of original retract (1-01759) seemed rather high for a pack of screws and plate of milled plastic, so I decided to design my own based on photos available on the internet. I had to alter some dimensions (mostly main body…
Wydruk około 11,68 €–14,27 € nettoWstępna wycena jednego wariantu
My personal journey for a first bigger project. I wanted to build my own enclosure with cheaper materials fitting my printer setup and table. I made this to use the cheapest (2mm) plexiglass from the DIY shop and cut mine to be 4 sheets…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Habe hier ein Modell gemacht um einen Abluftschlauch für eine Klimaanlage durch ein Plexiglas nach draußen zu führen. Die Plexiglas-Scheibe hat einen durchmesser von 4mm und wird von außen/innen vor dem Fenster mit Klebestreifen oder…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
https://www.rcsb.org/structure/1aoi
Wydruk około 7,37 €–9,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two-piece mount for retrofitting a nose gear on the multiplex Twinstar. For more stability, a brass sleeve must be inserted into the mount. The gear wire is then secured with set collars.
Wydruk około 1,18 €–1,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Neulich im Repaircafe wurde ich gefragt ob man mit den ständig kaputt gehenden Deckeln für den Duschablauf nichts tun könnte, da habe ich eben mal anhand der kaputten Vorlage ein Modell des Deckels erstellt. Gedruckt habe ich das erst mal…
Wydruk około 3,50 €–4,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Side mount for dell
Wydruk około 3,38 €–4,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holds the IR remote for the heat and cool air circulator fan DCAC30HC
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
This is designed specifically for a Dell Optiplex 7060 MicroPC, though it may be possible that some similar era Dell micros may fit in here too (the model in picture has an i7-8700 for a hint of its age). As you can see, I got a little…
This Dell Optiplex Mount is a versatile and compact solution designed to securely mount a Dell Optiplex 340M Desktop Computer to a 19" server rack. its design only takes up 1U of rackspace and allows you to mount 2 of them next to…
These parts are an alternative to the normal 2.5" caddy compatible with a smattering of Dell Optiplex Tower systems. I tested these models in a few Dell Optiplex 7060 Towers, and the printed parts had an excellent fit. Update 2023-12-13:…
I built this enclosure a year ago, but forgot to share it. I have recently received a few requests to share it so here it is! To get the Front Top Right bracket, just mirror the left one. I used 24"x24" plexiglass, but you can size that…
RC Crawler Obstacle #2: Complex mountain. Made from some simple geometric shapes, this obstacle really can be challenging! Designed to fit directly on the MK3 print bed, and fit the track width of an Axial SCX24 or Traxxas TRX-4M.…
This 3D-printed mount is designed for Dell OptiPlex Micro PCs with the following dimensions: Depth: 178 mm Height: 182 mm Width: 36 mm This should cover most, if not all, of the OptiPlex Micro Models. I designed & tested it on a 7000…
I bought an aluminum profile in 2020 for may ANET AM8 upgrade. It turned out this model of Simplex manufacturer. I did not find a suitable T-nut, because the inner dimensions are slightly different, so I designed one that fits this…
10" Rack mount for optiplex micro mini PCs
Rack mounts for Dell Optiplex to mount to a 10 inch mini rack with keystone jacks. Edit: V2 Strengthened and optimized. Print in PETG
If you like my work, tinkering and messing around with stuff. Then please consider supporting, it would be greatly appreciated! I'll be looking forward to interact with you guys and our shared passion for making! :)…
This is a VESA monitor mount for the Dell OptiPlex Micro series PCs. I used it with a OptiPlex 7060. Can be mounted vertically or horizontally as hole spacings are 100mm. I remixed this from Elppa8's version so that the bottom cleared the…
This is kinda a test at uploading, I have not printed this yet. I'll update this in a few days once i get my printer. I'll add additional connectors once I test this one. This is a corner for building a plexiglass or acrylic enclosure for…
Completed in 1973, the Twin Towers of the World Trade Center were engineering marvels due to them being some of the largest buildings in the world at that time, and were a symbol of Americas economic power. In 1993, bombs were detonated…
Build this to add spaces between each piece. It might need some cleanup after printing, as the space tolerance isn't perfect, but it is doing the job. It should be compatible with other Dell OptiPlex Micro models as well, but try it out…
I remixed it to include a void in the middle, to save some time and filament when printing. I also fixed a missing layer under the main arch that would cause the print to fail. I would strongly recommend not to print the original without…
A really simple vertical stand for the Dell OptiPlex 3050. The PC just slots in and the stands prevent it from tipping over.
Update 09/18/2024: See V1.2 for the latest release. Includes original files as well as additional versions: https://www.printables.com/model/1011612 Also see for Carbon Folder mod: https://www.printables.com/model/1011626 Duplex Folding…
I created this so I could mount some Dell Optiplex 7040 USFF (Micro) PC's under a desk, may suit other Dell, HP and Lenovo machines. I printed from PETG-CF and is plenty durable, I'd recommend using PLA+ or better. I desined this to pint…
Stabile stand for Dell Optiplex 3060 series PC - vertical position.
Elevate your Dell Optiplex 3050 Micro with these custom 3D printable model files designed to accommodate an MSI RTX 3050 LP graphics card. This set includes: 3D Case : A custom-designed case tailored for the Dell 3050 Micro, providing…
10" Rack tray to hold a Dell Optiplex 5070 (although other Optiplex models should fit) but also with an option to add a keystone jack (see my other models if you want to test print the same port to test). ** NOTE: These Rack components…
This adapter is tested with a motherboard from an Optiplex 3050 SFF, but it should be compatible with any SFF Optiplex motherboard from 2015 or newer. A reference image of a compatible motherboard is included. Printing Printed with 20%…
Complex maze wrapped around a cylinder. Easy to print No support
This version is not longer avaliable for download. This is my last version of Titan Metroplex, basen in the G1 Cartoon and the UK Marvel Comics. Parts of the design belong to Printformers and Sams Forge, seek for they amazing job. Feel…
just a quick design to fit the optiplex 390, 790, 990, 3010, 7010, 9010, 3020, 7020, and 9020 series of computers. it will probably fit others, but the optiplexes were what they were tested to fit.
This is a 2020 3 way corner brace. I made this brace specifically to eliminate the need to cut the corners off of Plexiglas when building Knickohr's 3d printer enclosure. The knockouts on the cube are where the glass would have hit if…
Replaces traditional vertical outlet. This is a slight derivative of the work by @Chriswak at https://www.printables.com/model/115385-duplex-outlet-shelf It has fewer holes and a flat top to accommodate larger items.
I had a idea for a complicated organizer made from PVC and brackets. I liked the look and function of the version by 3D-PT, but needed a lot more configurability. To do this I remade the brackets using the original as a reference. In the…
Off-lease business computers are one of the best ways to get decent (if slightly older) hardware for cheap. I grabbed a optiplex 7040 with a i5 6500, 16gb RAM and a 512GB SSD for less than $150. The down side is that the OEM PSU isn't…
Large outlet shelf for Duplex outlet. Could hold a phone, digital assistant, or other gadget.
V1.1: Duplex Folding Stock & Brace 2020 Conversion Replace "Arm" piece with 2020 Aluminum extrusion. V1.2: Duplex Folding Stock & Brace Push Release Edition Allow for faster folding to either side/ complete removal of stock arm. Update…
This is my design of Whomp character from Mario universe. I design it in split parts to paint or print each of them in different color and to reduce support need (NOT tested). For me just add support on mouth for this version. I include…
Used those additional brackets for my IKEA Lack enclosure build: https://www.printables.com/model/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr
I needed some brackets for the Dell Optiplex 3020M SFF PC, I found 1 other design but it didn't fit and wasn't exactly what I needed, so I designed this. Its Simple and effective. one bracket will hold it up but two is safer! Printing:…
Simple Under desk mount for a dell 7080 Micro
Scharnier für 3 mm Scheibe mit Sechskantnut auf der Rückseite
Plexiglass hinge v2 ( 2-3mm Plexiglass ) M3 30mm screw M3 nut or M3 30mm screw M3 threaded insert Updates: Add Part 2 with small tolerance for better movement Add Part 2 with tolerances and bigger width Add Part 1 for M3 threaded insert…
Two simple stands for keeping Perplexus puzzles from rolling around. 110mm: Perplexus Go 165mm: Perplexus Rookie 175mm: Perplexus Original 200mm: Perplexus Epic I added felt pads to keep the ball from getting scratched, but this is not…
Under desk quick print mount for dell optiplex micro (may work also with HP Mini and Lenovo Tiny series PCs)
I'm living in France, and buying fancy stuff like rectangular magnets of a specific size and plexiglass of 3mm is nearly impossible and quite expensive. So I decided to create my proper enclosure, made of wood, melamine plated mdf and 4mm…
The factory HDD caddy for the Dell OptiPlex 9020 Micro only fits a 9mm drive. This is a custom version designed to fit a 15mm drive. I’m reuploading this to Printables so more people can find it, as it took me three hours to discover that…
I decided to design my own enclosure. The goal was to make it as little visible as possible. So, plexiglass and prints! Originaly designed around the Prusa i3 MK3, but this ended up being customizable in terms of size, as you can make the…
I have a Dell Optiplex 7050 Micro with no faceplate and no power button. So I rebuilt it. Optimized print profiles for Bambu Lab printers available here:…
Perplexus is a 3-D ball-in-a-maze puzzle or labyrinth game enclosed in a transparent plastic sphere. By twisting and turning the sphere, players attempt to maneuver a small steel ball through an intricate maze composed of a number of…
This is a small rack designed to hold 5 Dell Optiplex MFF servers. Includes long shelves for the front, shorts shelves for the rear, 5 port patch panel and “shelf” for Unifi Flex Mini 5 port switch. I designed this to be a compact “rack”…
In my case it's an Optiplex 3020, but it's fine for other models. Print made in PETG with 100% infill; 2 washers are needed so as not to strain the plastic. Fixed to the wall with 2 wall-plug/anchor (6mm). A slot allows the use of a cable…
10" rack mount / shelf for Dell Optiplex Micro / MFF Series 5 with a hole for a keystone module. Models that should work: 3040, 5040, 7040, 3050, 5050, 7050, 3060, 5060, 7060, 3070, 5070, 7070. The rectancle on the rear right side is to…
Made this 3.5" HDD caddy for my Dell OptiPlex 3050, i wanted to add more storage but it only came with a small SSD. The screw holes might not match 100%, since i did not use them, its a tight fit and i don't plan on shaking my PC! also be…
Mould for cable "aftercare" for Multiplex 6pin connector used in RC models. Print instructions Printed with ASA, dipped in acetone (optional). Layer height 0,2mm. The same mould used for the male and female connector. Be careful with the…
Just the beta version of Metroplex v4. the proyect is in stand by for now. full model not avaliable for download anymore.
I've designed a snap in holder for the Dell Optiplex Micro. No screws or anything aditional required to secure the device. For those who don't want the snap in feature or only want it on one side, I have added an open version for each side.
Just a dousized version of mi version of metroplex for prototipe test Full model not avaliable for download anymore.
Designed a wall mount to fit the Dell Optiplex Micro PC that I recently got. My network setup is pretty limited where I live, and having space to run everything I want is even more limited. The only wired internet I can currently run is…
Update 5 - added Windows. Update 4 - added Central Control logo. Update 3 - added K3s and Ceph logos. Update 2 - added Unifi logo Update 1 - added Fedora, Nextcloud, and Docker logos Welcome! I love using the cheap Dell Optiplex MFF for…
An optical disk drive cover for the Dell Optiplex 5050 SFF
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
The original hair catcher hangs deep in the drain in the water, which I found very unpleasant, so I designed this hair catcher so that the sieve and the hair can dry and it is perceived as more hygienic. The part was created with FreeCAD.…
NOTE: Newest v2.0 of this model is now available - click here. NOTE: This is v1.1. If you were looking for v1.0 - click here. Note: As of Nov 16, 2023 — in addition to the earlier remix changes, today I added SVG files for engraving the…
Transform your workspace with our custom-designed wall mount for the Optiplex 3050 computer. Crafted with precision, this 3D-printable model offers a perfect blend of style and functionality, enabling you to securely hang your computer on…
In total four parts need to be printed. They are on the bulky size, so reducing the infill might help with filament consumption.
This is a case badge for a plex server using the new 2022 logo change. I designed this using Make Anything's tutorial for multi-colored prints with a single extruder (as seen here: https://www.youtube.com/watch?v=D7FiT5VqLSg). Single…
Recently got a Dell OptiPlex refurb and the logo wasn't pristine. Gasp! Gave me the idea to model and print a new one. Since I installed Ubuntu on this machine, I thought it would be cool to have the Ubuntu logo on it. I've added 3…
Hinges for 4mm acrylic plates, e.g. for 3D printer boxes. Only 2 metal screws are needed for mounting itself, all other parts are included. Please note the sides as the thread is only on one side at a time: LeftUp_RightLow = left side up…
Ständer für Perplexus mit Durchmesser 163, mit 70 Punkten. In die vier Ecken habe ich jeweils selbstklebendes Filz als Schoner für die Kugel eingeklebt. Das Filz gibt es z.B. hier:…
I printed on 15% infill, 0.2 mm layer heights on an Ender 3 V2 and works great. Be careful when screwing in because in the past I've had issues with models splitting in 2. I designed this 90 degree corner bracket holder with slots for…
A super-simple simple round cover plate. I printed this in PETG with Archimedean Chord fill on the main face because it prints near perfectly.
I was too lazy to replace my office duplex outlet with a GFCI or combo one, so I modified this design. If you use the sliced file, I tried to keep the supports to a minimum. Thanks, Jordanburgy, for the great design!
Clamp on / Quick Release Metal Detector Stand that fits the NOKTA MAKRO SIMPLEX+. No screws needed ! See pictures for proper attachment location. Infill can be what you like however I haven't tested the stand for strength below 50% while…
this is a drive 5.25" bay cover with grid for the DELL Optiplex 7010 it should fit the other models like 9010 etc. i arranged it that there is a continuous pattern in the form of the ventilation grille in the lower part of the computer…
Drain hair catcher für Kaldewei shower tubs. I don't know the exact type, but it should fit the Viega Domoplex drain (75mm diameter) incl. step / Fusion360 file Printed in PETG…
NOTE: This is v2.0. If you were looking for v1.0 or 1.1, click below: v1.0 v1.1 New in this version: The main new option here is the keystone jack slot in the base. This can be used with, for example, an ethernet jack for quick connect /…
Simple hinge for plexiglass Top in 3 versions: 1mm 2mm 3mm Bottom in 2 versions: without screw with screw ( M3 20mm ) Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 10-20
Eckverbinder für Gehäuse mit 5mm Plexiglas... M4 Senkkopfschrauben Corner Panel Joints for Housing with 5mm Perspex
Originally I wanted a Quad design that would fit nicely on my newly assembled Prusa-Mini. (Love it) However most of what I saw was really uninspiring, not particularly durable, and far too heavy. Thus I set out with the following design…
This is a remix of uktricky’s Dell Optiplex 5070 with Keystone Port, redesigned for use with 12U server racks . It’s optimized to print on small 3D printers by breaking the model into more manageable sections. Assembly requires 8× M6…
I like the design of Hermann S for the Lenovo Tiny Mount. So I adapted the model for my Dell Micro 5050. It should also work for other Dell Micros. Print as separate bodies!
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need 12 cylindrical neodymium magnets, Ø8mmx3mm…
A bracket for the Dell Optiplex 7050 computer that allows it to be mounted on the back of a monitor. It fits VESA 100x10 - no supports needed - 25% infill
I've modified the original IKEA Lack joints to remove each plexiglass individually for printer maintenance. This is useful if you have couple printers stacked on top of each other and you need to do some maintenance for the bottom one.…
I designed this splice box in my free time to help the company I work for to acess fiber optic cables in our building. I designed this custom box, because it had to be placed in a fuse box. Of course you can use it anywhere else. It is a…
Ever thought about mounting a Small Form Factor Dell Optiplex 5070 motherboard in a full-sized tower? Do you dream of PCI slots not aligning correctly and needing custom adapters to make them fit? Are you an electronics hoarder itching to…
A Simple box for your detecting finds . Fits snugly under the arm cuff of the Nokta Simplex+ Metal Detector. (See picture) Print Settings Printer: Ender 3 v2 Rafts: No Supports: Doesn't Matter Resolution: .2 Infill: 20% Filament: YOUSU…
Personnally, I printed it with ASA but I guess PETG and ABS may be used too.
I needed a spare one to fit the simplex so i printed at 2 and 100% infill PLA but will be printing in PETG, the PLA one is plenty strong tho so test it out first. Added another nut n bolt they been tidied up v2, these printed and fitted…
Basic wall or under desk mount for a dell micro pc, like to 5080 or 7080
Two versions. Assist has higher walls to account for foam vibration isolating pad. R/C car aerial tubes can be used to protect the reciever antennas. Print Settings Printer Brand: MK3 Printer: Prusa i3 Resolution: 0.15 Infill: 100%…
With these caddies, 3x 2.5in SSDs can be installed in place of the single 3.5in HDD and low profile optical drive of a Dell Optiplex 7040 SFF. This will max out the available SATA slots on the motherboard, allowing for maximum storage…
Hope the 5th part was fun for you :) Sidecar Velorex 560 - PART No.5 - Interior od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very small also so pay attention to…
