4810 modeli
This is a keycap for the low profile Cherry MX1B-L2NA switch. It prints perfectly on a Prusa Mini with 0.15 mm layer height. The keycap is easy to put on, doesn't fall off and is still easy to take off. Created this basic keycap in…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
This tool set helps you get a perfect finish on your silicone caulking. You'll find the following: straight profiles for corners (5, 7, 8, 10, 12, 14, 16 mm) rounded profiles for taps, fittings, or recessed joints (5 and 15mm) a tool to…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
MK4 / Mk3.9 Upgrade parts but laid out on MK4 with Input Slicing 0.4mm nozzle PETG. Prints 40% faster at the same quality. Original MK3 version takes 2,384 minutes (39.7 print hours) per set. This version takes only 1,434 minutes (23.9…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Aluminium profile cover 40x40 (N8I) with good fit. Useful to cover the sharp edges and keep off dust.
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Do you still have a stock MK3S or MK3S+ and need a bit more speed out of it for day-to-day stuff? This is the answer. This is my 0.32 layer height profile for 0.4 nozzles with every tweak I could come up with and I also included my custom…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Eyeballing the keycap profile is really annoying. Therefore, I went and did this tool to help you identify the correct row. This is meant for Cherry profile keycaps . Feel free to reference https://www.keycaps.info/ for the profiles. If…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Can be fitted without dismantling the Prusa (see photos for various dovetail guides). The V2 version requires no pliers. Important: Layer height for printing 0.1 mm Use 2 M4x20 or M4x12 Screws to mount Kann ohne Demontage des Prusa…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
V-Slot profile 2020 mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version , 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan . STL-Files for…
Wydruk około 2,97 €–3,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
General Info: Duct protrudes 75mm from back face of printer. I haven't done any super scientific tests, but I haven't been able to see a difference in cooling performance compared no duct. I'm pretty consistently 7-8C over ambient at 40%…
Wydruk około 6,84 €–8,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It would be nice if you post your make. Thank you
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Very sturdy and fits aluminum profiles.
Wydruk około 5,09 €–6,23 € nettoWstępna wycena jednego wariantu
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Systemprofil-Eckverbinder für Aluminuim-Systemprofile der Abmessung 20mm x 20mm. in das Loch in der Mitte des Alu-Profils (4,3mm) muss ein M5 Gewinde geschnitten werden. Die drei Alu-Profile werden mit M5x16 Senkkopfschrauben an dem…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After exhaustive testing, a very solid mount for the Thrustmaster Sparco TSS Handbrake to suit 160mm Aluminium Profile Rig. I wanted something that could stand up to the abuse of hard shifting, and think I've now settled on a solution.…
Wydruk około 14,82 €–18,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I believe it's more discrete than other designs because it doesn't have the “roof”, instead there is just an inner ridge on top keeping the tag in place while letting the silvery part of the tag be visible. Prints well with PETG and brim.…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sawtooth picture hanging bracket with a slim 3mm profile. Designed to be attached with 2 - #4 flat head screws. The bracket is 40mm wide and 8mm tall, with a 1.5mm recess to afford for the nail head. This model was designed for 3D…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
End cap for aluminium profile (item, FM systeme, ...) together as a stand.
Wydruk około 3,64 €–4,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Français en dessous :) __________________________________________ Here's a simple guide to allow you to easily tap M8x1.25 threads into the core of a 4040 Aluminum profile. This works perfectly with this kind of extruded profile:…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a simple 2u DSA spacebar for my ortholinear board and didn't have access to any at the time so I just designed and 3d printed one! This is designed with extra stems so it can be used with standard mechanical keyboard stabilizers…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits 12cm rods. An adapter for oval rod systems can be found here
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Extreme cheap and fast print, fits anywhere and makes a nice giveaway :) Check your tires for minimum profile or optimum (check your country standards on what you need). Typically you want 3 mm for summer and 4 mm for winter tires for…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Printed with ERYONE PLA 180°C With support PRUSA i3 MKS+
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
I needed a low profile mount to stick to my wall as a baby monitor. I used two XL 3M command strips (removable velcro tape) to adhere to the wall. I printed the mount out of some PLA+ at 5% infill and 80% infill around the little arm…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
A motor mount and custom low-profile fairing for the Atom RC Killer Whale motor pods. The motor mount improves the cooling of the ESC area, and the fairing should be compatible with the original motor mounts (not tested!) The fairing…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
I designed these decorative six-pointed stars with a clean geometric profile, ideal for shiny or metallic filaments that highlight their intricate details. Each star includes two small holes at opposite tips, allowing you to create a…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
Zubehör für FoxAlien Masuter Pro CNC. Vakuum Halterung, Knopfhalterung, Gebläsehalterung (Potentiometer) für 20 mm Nutprofil welches auf der Front genutzt wird. Cnc Zubehör. Verwendet von mir: Knopf: GeKLok 5 Stück KCD11 10 mm x 15 mm…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
2D version of: Triumph Daytona 675 D67LC/09 (2009-2012) Triumph Daytona 675 H67 (2013-2016) Triumph Daytona 765 Moto2 HB06 (2020).
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Stackable Low-profile Athletic/Soccer Cone. Print in TPU. 4 cones in 4 hours.
Wydruk około 3,66 €–4,47 € nettoWstępna wycena jednego wariantu
After hanging my backpack into first model, the model in question did not even hint about bending under load.. Doubled as a backpack and jacket hook. First impression: Hook is definitely flexier than v1, seems to do fine however under…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Two-part Filament Holder for 3D printer frames made of aluminium 3030 profile Needed : 2x M6 screw 2x M6 T-block sauate nut for 3030 profile M8 Threaded rod 2x M8 nut
Wydruk około 5,84 €–7,13 € nettoWstępna wycena jednego wariantu
Antivibration feet for MK3x printers and other printers using 3030 profiles. Needed for assembly: 1x M3x18 1x 3030 M3 T slot sliding nut 1x Sqash ball
Wydruk około 1,12 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Mounting for an RGB LED strip profile to the ceiling or a wall. Dimensional specifications for the profile are provided in the attachment. Below, you will also find a link to my OnShape and I also attach a STEP file in case you wish to…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This stand is perfect if you prefer to keep your Framework 16 on your desk with the lid closed while maintaining optimal thermal performance. The design preserves the laptop's low profile while creating necessary clearance underneath for…
Wydruk około 6,47 €–7,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This tool will help you align M6 self-tapping sleeves for 4040 I-type profiles ( example ). It makes it easier to get the sleeves working right the fist time you make a cut. Some remarks: Make sure that the 4040 profile has a straight cut…
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
Hey Guys, Here are my Creality K1/ K1C/ K1 Max/ Orca Slicer , Quality, Speed, and Stealth Profiles for 0.4 Tested on K1, K1 Max, K1C Hotends. (Standard, CHT, Unicorn) If you are using the RetroGlide Gantry Mod You can find my latest…
This is my profile for the K1 Max in OrcaSlicer. It contains the printer config, 2 printing profiles and a material profile for the included HyperPLA. Also included are a model for the build plate along with the texture image, see below…
Please give it a 💖 if you like it 🥰 Edit 2024-07-28 : Flavor updated Edit 2024-07-13 : Added a “Quality Profile” Added the thumbnails to preview models on the printer 👉 Link to my Ender 3 V3 SE Profile 👉 Link to my Ender 3 V3 Profile 👉 My…
Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
👉 Link to my Ender 3 V3 KE Profile 👉 Link to my Ender 3 V3 Profile 👉 My other Slicer Profiles & Models Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 32 minutes…
This Projet is WORK IN PROGRESS If you like this project, take a moment to buy me a virtual coffee … To install the texture and printer silhoutte in PrusaSlicer, go to: Settings → Printer Settings → General → Bed shape → “Set…” Load the…
Please give it a 💖 if you like it 🥰 Edit 2024-08-29 : Import error of the Ender 3 V3 Plus for Cura solved Edit 2024-07-28 : Added a “Quality Profile” Added the Ender 3 V3 Plus 👉 Link to my Ender 3 V3 KE Profile 👉 Link to my Ender 3 V3 SE…
OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…
This is a simple easy to print design to convert an Ikea Skadis into a freestanding pegboard. The feet attach to the board using the supplied Ikea hardware. I've uploaded two designs: one with space for an M4 hex nut, and another which…
Changelog: Added Polymaker Polylite ASA (4/20/23) Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf (4/30/23): Fixed the ASA profile to have the filament…
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
Hello, I've created a low-profile bracket for this annoying 25mm fan. This is the second version of the bracket. I'm sharing the model now because I finally received new fans and was able to properly test its performance and it works as…
How to setup the profile: Go to File → Import → Import Config Bundle and select the .ini file. Download this program and go to Print Settings → Output options and replace “thumbnail-path-here” with the path of the program you downloaded…
If you want to support me you can now nominate me and my designs for the Printables Awards 2025! :) The Low Profile Wall Mount is a compact and durable mounting system designed for quick and clean installations. The mount features a…
For the person who asked for dialed in settings for Sunlu, these are the ones I use. Hope they are useful for you all.
This printer profile is a copy of the profile from Bambu Studio (01.02.00.09), with the placeholders and variables adjusted to fit the PrusaSlicer style rather than the Bambu Studio style. The linear advance (flow calibration) is not…
These are an alternative clip for @LineArcLine's excellent Skadis T-Clip System. This version shortens the clip so that it does not protrude beyond its mounting recess and will not interfere with anything in front of it. Both painted and…
Change log: Added a PA-tuned profile for Bambu's PETG-CF (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament. I do not recommend it. Added Overture Army Green PETG (4/20/23) Added California Filaments…
**This original config was made by Florian Greco, I just adjusted the config to be more in line for P1P usage** The files in this post are made to be imported to Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as…
This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some…
All parts created with solidworks aand rendered with solidworks visualize. You can simply resize the parts and use it
Hi, I was struggling to get a working profile under Orca Slicer until they added a base profile for the V3 SE. However, it still did not lay down a proper initial layer and when it did it stopped extruding from layer 2 onwards. I think…
Hi everyone, since official profiles for the Anycubic Kobra 2 Pro are not available for OrcaSlicer, I created one based on the official profiles that Anycubic made for PrusaSlicer with a couple of improvements such as easier to remove…
These are T-Nuts for the common 20x20mm Aluminium Extrusion profiles many printers are made of. I designed them for my Profore Original 3D-Printer to attach things like cable clamps etc. While designing, I learnt that the profiles look…
Changelog: 4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added…
Here's a basic keycap set I made for my K95, but will likely be compatible with any Cherry MX based key switch. Includes all keycap sizes as individual files - feel free to mix and match to create your own colour set. The keys feel good…
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
UPDATED profiles for OrcaSlicer 1.9 and up. ( Download the slicer here ) Sharing some 0.4 and 0.6 profiles for the Flsun V400 using OrcaSlicer. Files are for Vanilla Klipper or Flsun Klipper (only difference is the Start and End gcodes).…
Anycubic Kobra 2 Max Profile for Orca Slicer Manually copied the settings of the K2M Prusa profile into the default Orca Slicer Kobra 2 profile. Maybe something can be optimized, but it's working fine! Also added a found bed stl file.…
Changelog: (7 /18/23): Added Prusament Marble Grey PLA (5/20/23): updated / retuned Prusament Galaxy Black PLA. Improved PA value. (5/16/23): updated Sunlu_White_PLA+ and Sunlu_Grey_PLA+ with better PA values, min layer times, and retract…
These feet here are designed for all printers, which are using V-Slot 4040 extrusions as frame. So if these feet are working with your printer, and your printer is not listed yet, please tell me, so I can add the printer to the list.…
This profile is the V2 of my previous profile that offers fantastic print quality over speed, ensuring that your creations are meticulously crafted with precision and detail. This profile will allow you to achieve the same fantastic…
This is a port of https://www.thingiverse.com/thing:2503622 , by mightynozzle. I do not claim ownership of the model . I had a hard time finding something like it on printables, so I ported it here. The following text is taken straight…
Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…
Collection of screws extruded aluminum profile including : 20x20, 40x20, 30x30, 60x30, 40x40, 40x40L, 80x40, 80x80, 80x80L L = Light Weight
Updates 03/2022: Changed two screw holes on the switch side part to slotted holes (v2.1). This allows you to tune the fit and tension during assembly. 04/2021: Added a "MIRRORED" version, which allows you to flip the PSU around and have…
Y'all know that FDM printers are not ideal for printing minis but hey, it's possible, and you can get pretty damn good prints if you tune it correctly. Main things I've noticed made a difference were : Layer Height, of course The printing…
since the original cap was way to high for me needs, i made it low profile, but this did not distribute the water well enough, and it tended to splash on one side - so i added this “knob” in the middle, that solved this issue prints with…
Here are the Orca Profiles that I setup to get quality but quick prints
This is a CAD blank for the internal profile of the Compact Milwaukee Packout Organizer. I have supplied both the original fusion file and a .step file. Feel free to use it as a way to satisfy your endless urge to organize as as a kind of…
This is my Orca Slicer profiles for my Anycubic Kobra 2 Neo. PLA Filament profile included (Sets the bed to 45 degrees). I took the PrusaSlicer profile and converted it to Orca Slicer. If it helps please consider leaving a review and a…
Please give it a 💖 if you like it 🥰 🪧 My 8 colors Splitter for Kobra 3 👉 https://www.printables.com/model/1019258-8-colors-on-anycubic-kobra-3-combo-splitter-for-8 Please leave a comment if you have any possible improvements to make to…
This is the profile I have made for my Anycubic Kobra 2Pro with Prusa slicer based on many experiments and 3d model testing. and I got some amazing results. Well, lately I got down the rabbit hole of tuning, tweaking, and upgrading my 3d…
Prusa Slicer Profiles for Creality K1 and K1 max The model is just there, cause I needed one to upload the Profiles. Can ignore it. There are two config files. load both Included : - PLA high flow Material Profile (Custom Gcode Added for…
What this is: This is a collection of all of my PA/Nylon and similar (PACF) filament profiles for all filaments I've used of this type. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate ,…
01/12/23, Added Updated .3mf. Bambu Studio settings tuned for eSUN PETG with first layer height and temperatures to suit Wham Bam PEX. Also works just as well with textured plate. After loading the .3mf there is setting changes in all 3…
Don't forget to hit the like button if this helps you :) The included prints are simple validations to run after applying these instructions and the result should look something like the posted photos. If it does not and it has…
After a few failed updates from Cura and general instability, i made the move to Prusa Slicer 2.1. I tweaked the profile with a few test prints, and i find the results better than Cura. It should be a good starting point for anyone trying…
2020 Extruded Aluminum - Profiles Collection - Parametrico/Parametric - Adjust the Z scale to obtain longer profiles Available in 5 variants: 2020 4 Sides Open 2020 1 Sides Open 2020 2 Sides Open (90°) 2020 2 Sides Open (180°) 2020 3…
This profile prioritizes fantastic print quality over speed, ensuring that your creations are meticulously crafted with precision and detail. This profile will allow you to achieve the same fantastic results that I have without…
Do you need a tool to smooth silicone around pipes to seal any leaks? Or after installing a sanitary fixture? This is the tool you were looking for. This tool features a handle for a comfortable grip and various spatulas with the main…
Attention: I take no responsibility for damage to your printers These profiles were created from base BambuStudio. The use is as good as BambuStudio only faster and better features! There are 2 presets: 1. P1P w Bed Leveling 2. P1P…
Very fast and good quality profile for the ender 3 v3 se printer. Currently, it is based on Klipper firmware, if you use marlin, remember to modify any gcode and printer settings.
Editable insert for the thinner, Low Profile organizer. The over all inside height should be 38mm.
These Packout low-profile organizer labels are inspired buy Dan Winciker’s Milwaukee Low Profile Packout Bit Set Label thing on Thingiverse. I have re-modeled the labels in openSCAD so that you can customize the text on the label and…
1 Setup The FLSun SuperRacer is not official supported in the PrusaSlicer software. So we need add our own printer or use a similar to start with. Let's go! 1.1 Initial printer setup We start the PrusaSlicer and then from the…
This is a complete pack of T-nuts designed for the assembly of 2020 aluminium profiles. This pack contains a variety of T-nuts for different applications. There are T-nuts for different sizes of screws, and there are T-nuts with…
v0 of my low profile mic arm. I wanted a low profile arm because I'm having multiple screens and this is the most convenient solution. I also wanted a fully printable solution, no external piece needed. All axes are working well, you will…
Tag me if you printed~~~!!! Twitter https://twitter.com/YuTR0N
I have designed this profile for LED strips up to max 15mm wide. The beam angle is 45 degrees, making this profile perfect for indirect lighting. The fit is perfect and the diffuser snaps into place on the side without the need to use…
This is a remix from Onelostcause ; original model found here . The original model is great for holding any standard/generic straight handled deburring tool. I wanted to incorporate blade storage while still retaining the ability to stack…
Magnetic Bit holders for the trays that come with the Milwaukee slim low profile packout compact organizers. Uses 6x2mm magnets https://www.amazon.com/dp/B07KJ9H31P?psc=1&ref=ppx_yo2ov_dt_b_product_details Super glue the magnets on the…
To add a profile for a specific printer, adjust the table dimensions and axis height according to the model, and then customize the profile according to personal preferences. PLEASE PROVIDE FEEDBACK ON HOW THE FILES WERE HANDLED AND A…
![[FAST] Orca slicer profile for ender 3 v3 se](https://media.printables.com/media/prints/960857/images/7338894_a5ed72e0-36b1-415d-b77f-674c59c58e92_43e5ce64-7151-4836-87ae-c3d58e2c80ce/banner-orca-slicer.webp)
