P
PrintablesSKIPe
Kobra 2 Pro - PETG profile
Modified original Pro profile to PETG, works pretty well.
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 1563
- Polubienia
- 41
- Ocena
- 0
Wyniki wyszukiwania: profile
4456 modeli
P
PrintablesJV Lobo
Low profile keycap for Keychron K3
I designed this because I couldn't found any low-profile keycaps that would fit my Keychron K3. Print on a resin printer to get the best quality. I also added a version for filament printers with higher tolerances so it fits. I sliced it…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1439
- Polubienia
- 177
- Ocena
- 4,8
P
Printablesraymaclabs
Elgoo Neptune 4 Pro cura profile (tested with results!)
Disclaimer: this is provided as-is to tweak your own profile, use at your own risk. Rename the file to .curaprofile to import. You will need to adjust this depending on your filament. This profile is based on Elgoo Rapid PLA+ and a stock…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1177
- Polubienia
- 35
- Ocena
- 5
P
Printablesalleycat
Bambu Lab X1 Filament Profile - extrudr greentec pro
To add the filament profile to Bambu Studio, follow these steps: 1. Download the .zip archive - the .gcode file is empty and can be ignored 2. Extract .json file from zip archive 3. Open Bambu Studio 4. Go to File →import→import…
Wydruk około 3,26 €–3,98 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1134
- Polubienia
- 47
- Ocena
- 4,67
P
Printableshennedo
Low profile right angle cap for Neutrik NC3MXX
Low profile right angle cap for the Neutrik NC3MXX or NC3MXX-B. The thread screws into the plug about 1 turn, this seems to be working at least with the cable I have. It also holds the pins in place. Perfect for your audio mixer bag,…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
- Pobrania
- 990
- Polubienia
- 91
- Ocena
- 4,83
P
PrintablesVictor
Prusa MK3s+ and MMU3 - Orca Slicer profile
Working profile in Orca Slicer for a Prusa MK3s+ and MMU3. Tested with 1000+ tool changes with no cloggs and only one user error :D This is no longer getting updated since I sold my MMU3. Video guide Step-by-Step video guide Instructions…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
- Pobrania
- 980
- Polubienia
- 67
- Ocena
- 5
P
Printablesthat1guy
Kobra 2 Neo Orca slicer profile
all the profiles I found were not up to my standards from prusa slicer so I made my own
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
- Pobrania
- 914
- Polubienia
- 26
- Ocena
- 5
P
PrintablesMaciek
Low profile CNC clamps
I was looking for a low profile CNC clamps, which clamps material from the side of the material, not from the top. I wanted to have access to all the top surface while milling, not covered by any clamps. My clamps has 15deg angle, so they…
Wydruk około 3,62 €–4,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 689
- Polubienia
- 97
- Ocena
- 5
P
PrintablesSKIPe
Kobra 2 Pro - PETG profile V2
My currently used profile for PETG filament. No stringing for me.
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 625
- Polubienia
- 43
- Ocena
- 0
P
PrintablesRobeena Shepherd
Glass Profile for Prusament PETG
I'm not saying I got super obsessed printing Prusament PETG as clear as possible, but I'm also not not saying that. Building on the excellent video from CNC Kitchen, which in turn builds on the work of Rygar1432, I set out to endlessly…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 561
- Polubienia
- 73
- Ocena
- 5
P
Printablesmaxcross
Cherry MX Low Profile keycap Redragon ZT04-Red-30 Red key cap
Simple Circular keycap for Low Profile ZT04-Red Mechanical Switch, sold on Alixpress.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
- Pobrania
- 529
- Polubienia
- 53
- Ocena
- 5
P
PrintablesTobashadow
Prusa MK3S MK3S+ Speed profile + Best Supports settings Combo
Do you still have a stock MK3S or MK3S+ and need a bit more speed out of it for day-to-day stuff? This is the answer. This is my 0.32 layer height profile for 0.4 nozzles with every tweak I could come up with and I also included my custom…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
- Pobrania
- 445
- Polubienia
- 27
- Ocena
- 4,5
P
Printablesluq0
MACRO photography accessories - focusing rail and bellows using 2020 v-slot profile
Introduction: Photographic bellows is a very efficient tool that allows to achieve high magnification ratios with pretty much every lens. Below you can see a gif composed of three images taken using Cosina COSINON AUTO MC f/2.8 135 which…
Wydruk około 5,37 €–6,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 385
- Polubienia
- 151
- Ocena
- 5
P
PrintablesHeikit
Buddy3D Buddy 3D Camera Mount Holder Prusa MK4/MK4s and other Aluminum Alu Profiles
Can be fitted without dismantling the Prusa (see photos for various dovetail guides). The V2 version requires no pliers. Important: Layer height for printing 0.1 mm Use 2 M4x20 or M4x12 Screws to mount Kann ohne Demontage des Prusa…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 374
- Polubienia
- 58
- Ocena
- 4,25
P
PrintablesVeracon
40mm Aluminium Profile Endcap
Endcaps for 40mm aluminium profiles. 40x40 40x80 40x120 40x160 80x80 80x120 If you like the print profiles, please consider rating them. Thanks :-)
Wydruk około 4,20 €–5,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 351
- Polubienia
- 35
- Ocena
- 0
P
Printablesjesh
Lado Exhaust Duct - Low Profile Side Exhaust Duct for the Core One
General Info: Duct protrudes 75mm from back face of printer. I haven't done any super scientific tests, but I haven't been able to see a difference in cooling performance compared no duct. I'm pretty consistently 7-8C over ambient at 40%…
Wydruk około 6,84 €–8,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 280
- Polubienia
- 159
- Ocena
- 4,8
P
PrintablesHeikit
Hook Haken 30x30 and 40x40 Bosch Aluminium Profile
It would be nice if you post your make. Thank you
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
- Pobrania
- 275
- Polubienia
- 34
- Ocena
- 0
P
PrintablesExtrutim
Fast Face Shield 36min Profile .3mf PLA MK3s
I have continuously optimized my profiles and can now print a face shield in 36 minutes. It is still very stable and elastic. Every printer prints differently and every roll of filament is slightly different. I can not guarantee that my…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
- Pobrania
- 268
- Polubienia
- 17
- Ocena
- 0
P
PrintablesHeikit
Remix of Buddy3D Buddy 3D Camera Mount Holder Prusa MK4/MK4s and other Aluminum Alu Profiles
Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 241
- Polubienia
- 45
- Ocena
- 4,67
P
PrintablesMBLX
CUP HOLDER for Aluminum Profiles
Very sturdy and fits aluminum profiles.
Wydruk około 5,09 €–6,23 € nettoWstępna wycena jednego wariantu
- Pobrania
- 233
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMartinRowan
Dell QLogic 57810S Dual Port 10Gbps SFP+ Card Low Profile Bracket
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
- Pobrania
- 231
- Polubienia
- 10
- Ocena
- 0
P
PrintablesOBA
Fixation 20°/30°/45° for LED-Strip Aluminium Profile
Mounting clips allow to fix a LED-strip aluminium profile at 20, 30 or 45deg angle. The profile clips into the holders.
Wydruk około 2,23 €–2,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 215
- Polubienia
- 32
- Ocena
- 0
P
PrintablesStanley
Logitech C270 arm base for 30x30 aluminum extruded profile
This is remix of Logitech C270 tripod for 30x30 extruded aluminum profile. Print instructions Rafts: No Supports: No Resolution: 0.2mm Infill: 40%
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
- Pobrania
- 194
- Polubienia
- 37
- Ocena
- 5
P
Printablesshkarlsson
AirTag Pet Collar Clip (Lowest Profile)
I believe it's more discrete than other designs because it doesn't have the “roof”, instead there is just an inner ridge on top keeping the tag in place while letting the silvery part of the tag be visible. Prints well with PETG and brim.…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 156
- Polubienia
- 26
- Ocena
- 5
P
PrintablesMatt Beechan
Low Profile Sawtooth Picture Frame Mount
Sawtooth picture hanging bracket with a slim 3mm profile. Designed to be attached with 2 - #4 flat head screws. The bracket is 40mm wide and 8mm tall, with a 1.5mm recess to afford for the nail head. This model was designed for 3D…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 146
- Polubienia
- 23
- Ocena
- 5
P
PrintablesJanek
Monkey Palace Cards Organizer for Prusa printers, lower profile, easy card pickup feature
🐒 Monkey Palace – Card Organizer (Remix) This is a remixed and improved organizer for the board game Monkey Palace . I redesigned the original idea to better fit real gameplay and 3D printing needs. 🔧 What’s improved? Lower profile – fits…
Wydruk około 4,28 €–5,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 146
- Polubienia
- 11
- Ocena
- 0
P
PrintablesLa Cave Au Chat
Tapping guide for 4040 Aluminum Profiles - Guide de taraudage pour Profils Alu 4040
Français en dessous :) __________________________________________ Here's a simple guide to allow you to easily tap M8x1.25 threads into the core of a 4040 Aluminum profile. This works perfectly with this kind of extruded profile:…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 131
- Polubienia
- 17
- Ocena
- 0
P
PrintablesPatrick
End caps for holow profiles e.g. balcony railing
This are endcaps for a balcony railing to prevent wasp building their nest inside the steel tubes. Rectangular Version: Size: 50 mm x 30 mm (outside), 45 mm x 25 mm (inside) It is designed to fit into a 50x30 profile with 2 mm wall…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
- Pobrania
- 99
- Polubienia
- 42
- Ocena
- 4,5
P
PrintablesmoWerk
Low Profile Curtain rails bracket | Curtain Rod Holder
Fits 12cm rods. An adapter for oval rod systems can be found here
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
- Pobrania
- 85
- Polubienia
- 14
- Ocena
- 0
P
PrintablesEnta
Schnellspanner für Aluschienen C-Profil / Quick release for aluminium rails C-profile
Du benötigst zusätzlich eine Schlossschraube/Flachkopf Vollgewinde M8 in der gewünschten Größe und eine entsprechende Mutter. Die Schlossschraube wird an zwei Seiten flach geschliffen. Die Mutter wird in den Arretierknopf eingeklebt. You…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
- Pobrania
- 71
- Polubienia
- 9
- Ocena
- 0
P
PrintablesExceeder
Click-on tool holder for aluminum profile (no need to remove profile caps)
Slightly enlarged so if won't wobble and can easily hold a tool e.g., a spatula.
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 62
- Polubienia
- 9
- Ocena
- 0
P
Printablessamh
AtomRC Killer Whale - Motor Mount + Low Profile Fairing
A motor mount and custom low-profile fairing for the Atom RC Killer Whale motor pods. The motor mount improves the cooling of the ESC area, and the fairing should be compatible with the original motor mounts (not tested!) The fairing…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
- Pobrania
- 59
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMetikumi
Decorative Six-Pointed Stars with Raised Geometric Profile
I designed these decorative six-pointed stars with a clean geometric profile, ideal for shiny or metallic filaments that highlight their intricate details. Each star includes two small holes at opposite tips, allowing you to create a…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
- Pobrania
- 58
- Polubienia
- 10
- Ocena
- 0
P
PrintablesMatteo1996
Alluminium Profile Cover (40x40mm)
Cover for Alluminium Profile Size 40x40mm
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 57
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTaylor Chien
Radxa Rock 5B Ice Tower Low Profile Conversion Bracket
This is a small bracket to convert the Ice Tower cooler for the Raspberry Pi to the Rock5B's CPU. I tested this with a thermal pad, but this could feasibly work with CPU thermal paste as well. The heatpipes from the cooler are the…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 5
P
PrintablesXenGi
Triumph Daytona side profile
2D version of: Triumph Daytona 675 D67LC/09 (2009-2012) Triumph Daytona 675 H67 (2013-2016) Triumph Daytona 765 Moto2 HB06 (2020).
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
- Pobrania
- 42
- Polubienia
- 2
- Ocena
- 5
P
PrintablesThings Maker
Ikea vigda profile
Il profilo è per la vigda a tre binari, la lunghezza è di 10 cm che puoi stampare più volte per poterla allungare
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
- Pobrania
- 41
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSigmark
Backpack hook - low profile
After hanging my backpack into first model, the model in question did not even hint about bending under load.. Doubled as a backpack and jacket hook. First impression: Hook is definitely flexier than v1, seems to do fine however under…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 40
- Polubienia
- 4
- Ocena
- 5
P
PrintablesTimothy 3D
Buddy3d profile mount witch cable holder
REMIX holder for the buddy3D Camera. I added the text "original Buddy3d", in the mk4 style. I also added 3 cable holders, it is easier to hide the cable. I used the same print settings as described in the original. feel free to add a…
Wydruk około 3,08 €–3,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 35
- Polubienia
- 7
- Ocena
- 0
P
PrintablesDamien Sullins
Wydruk około 5,53 €–6,75 € nettoWstępna wycena jednego wariantu
- Pobrania
- 35
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKubiV
Filament Holder for ALU 3030 Profile
Simple Two-part Filament Holder for 3D printer frames made of aluminium 3030 profile Needed : 2x M6 screw 2x M6 T-block sauate nut for 3030 profile M8 Threaded rod 2x M8 nut
Wydruk około 5,84 €–7,13 € nettoWstępna wycena jednego wariantu
- Pobrania
- 32
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLukáš Zounek
Sqash ball feet MK3S+/3030 Profile
Antivibration feet for MK3x printers and other printers using 3030 profiles. Needed for assembly: 1x M3x18 1x 3030 M3 T slot sliding nut 1x Sqash ball
Wydruk około 1,12 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 30
- Polubienia
- 4
- Ocena
- 0
P
Printables3DMonkey
INDX Low-Profile Tool Docks for CORE One/+ | BridgeDock
Start here Choose your kit: 4 tools (1–4) or 8 tools (1–8). The table below is the complete printed-parts list for a simple, single-colour build with plain front plates. Print the quantities shown, then follow the shopping list and…
Wydruk około 3,55 €–4,34 € nettoWstępna wycena jednego wariantu
- Pobrania
- 27
- Polubienia
- 22
- Ocena
- 5
P
PrintablesNovemberKou
Tweezer Holder for Mounting on 2020 Size Aluminum Extruded Profiles
I usually use mainly PETG, and as the nozzle heats up, the melted PETG drips down due to its own weight. I use a tweezer to pick up the excess material. I also use tweezers to remove material that has carbonized and turned black on the…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 26
- Polubienia
- 3
- Ocena
- 0
P
PrintablesApis
Cover for square profile 60x60mm
Cover for square profile 60x60mm
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBSz
NACA 65 210 profile turbine blade
I made this model as a visual representation for my Material Science class. Take into consideration that it is not a standard part The height is 10 cm The width is around 9 cm. Suppots are included.
Wydruk około 0,81 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNovemberKou
Filament Cutter Holder for Mounting on 2020 Size Aluminum Extruded Profiles
I made this to attach my filament cutter to the enclosure of the 3D printer. 私が使っているフィラメントカッターを3Dプリンターの筐体に取り付けるために作りました。 https://www.printables.com/model/301514-filament-cutter-45deg I took a photo of this, imported it into Fusion360,…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNovemberKou
Kimwipe Holder for Mounting on 2020 Size Aluminum Extruded Profiles
I usually use mainly PETG, and when printing PETG, it is recommended to apply glue to the PEI sheet as a release material. The glue applied will be uneven, so I lightly rub it with a kimwipe wetted with water to flatten it. So I made a…
Wydruk około 3,81 €–4,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNovemberKou
Spray Bottle Holder for Mounting on 2020 Size Aluminum Extruded Profiles
I usually use mainly PETG, and when printing PETG, it is recommended to apply glue to the PEI sheet as a release material. The glue I apply is uneven, so I lightly scrub it with a Kimwipe wetted with water to flatten it. It was…
Wydruk około 3,08 €–3,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 19
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGur Telem
Media Buttons Keychron Low Profile (e.g. Keychron K0 Max)
Designed some media buttons to print for my low profile numpad
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
- Pobrania
- 18
- Polubienia
- 8
- Ocena
- 0
P
PrintablesNovemberKou
Scraper Holder for Mounting on 2020 Size Aluminum Extruded Profiles
I use the "Nitoms Tape Peeling Cutter White T0860" to peel off the 3D printer print from the heat bed steel sheet. 3Dプリンターで印刷したものをヒートベッドスチールシートから剥がす際に、私は「ニトムズ テープはがしカッター ホワイト T0860」を使っています。 https://www.amazon.co.jp/dp/B07QF883Z9 I took a…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMilen Jivkov
Playstation Holder Right (under desk) (Left side in my profile)
Hey guys, i design my own PS4 500gb under desk Holder! I post here left side!
Wydruk około 4,83 €–5,91 € nettoWstępna wycena jednego wariantu
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
Printablesmscalora
Vase 90 - Sine Wave Profile - Modern
Used a sine wave to create the profile of this vase. Straight neck modern look. Both shelled to 2mm and solid version (for vase mode) Fusion 360 CAD file included, adjust frequency, amplitude, offset, height, width, thickness, etc Example…
Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFARI Brussels
Low profile screen stands for Beetronics screen
The “connectors” option from Prusa slicer was used, but i suggest removing a bit of the side thickness from the connectors with a sharp knife to be sure the two parts fit well togheter.
Wydruk około 5,78 €–7,06 € nettoWstępna wycena jednego wariantu
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesR3tr0_D
Orca Slicer Profiles for K1/ K1C/ K1 Max - 0.4 and 0.6 + Universal Build Plate Guides
Hey Guys, Here are my Creality K1/ K1C/ K1 Max/ Orca Slicer , Quality, Speed, and Stealth Profiles for 0.4 Tested on K1, K1 Max, K1C Hotends. (Standard, CHT, Unicorn) If you are using the RetroGlide Gantry Mod You can find my latest…
- Pobrania
- 20 640
- Polubienia
- 922
- Ocena
- 4,8
P
Printablesripley
Creality K1/K1 Max OrcaSlicer Profile
This is my profile for the K1 Max in OrcaSlicer. It contains the printer config, 2 printing profiles and a material profile for the included HyperPLA. Also included are a model for the build plate along with the texture image, see below…
- Pobrania
- 16 816
- Polubienia
- 561
- Ocena
- 4,86
P
PrintablesKaminoKGY
Creality Ender 3 V3 KE Slicer profiles for PrusaSlicer & Cura
Please give it a 💖 if you like it 🥰 Edit 2024-07-28 : Flavor updated Edit 2024-07-13 : Added a “Quality Profile” Added the thumbnails to preview models on the printer 👉 Link to my Ender 3 V3 SE Profile 👉 Link to my Ender 3 V3 Profile 👉 My…
- Pobrania
- 12 925
- Polubienia
- 421
- Ocena
- 4,6
P
PrintablesKaminoKGY
Creality K1, K1C, K1 SE & K1 Max PrusaSlicer & Cura (some profiles with Side Blower and Enclosure Fan)
Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…
- Pobrania
- 11 901
- Polubienia
- 294
- Ocena
- 5
P
PrintablesRiskable
Complete Cherry MX stem keycap set optimized for 3D printing (GEM profile, multi-material)
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
- Pobrania
- 10 431
- Polubienia
- 2555
- Ocena
- 4,8
P
PrintablesKaminoKGY
Creality Ender 3 V3 SE PrusaSlicer Slicer profile
👉 Link to my Ender 3 V3 KE Profile 👉 Link to my Ender 3 V3 Profile 👉 My other Slicer Profiles & Models Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 32 minutes…
- Pobrania
- 8408
- Polubienia
- 181
- Ocena
- 5
P
PrintablesArt3Design
FLSun V400 PrusaSlicer Profile
This Projet is WORK IN PROGRESS If you like this project, take a moment to buy me a virtual coffee … To install the texture and printer silhoutte in PrusaSlicer, go to: Settings → Printer Settings → General → Bed shape → “Set…” Load the…
- Pobrania
- 7976
- Polubienia
- 196
- Ocena
- 4,8
P
PrintablesKaminoKGY
Creality Ender 3 V3 & V3 Plus PrusaSlicer & Cura Slicer profiles
Please give it a 💖 if you like it 🥰 Edit 2024-08-29 : Import error of the Ender 3 V3 Plus for Cura solved Edit 2024-07-28 : Added a “Quality Profile” Added the Ender 3 V3 Plus 👉 Link to my Ender 3 V3 KE Profile 👉 Link to my Ender 3 V3 SE…
- Pobrania
- 7211
- Polubienia
- 139
- Ocena
- 5
P
PrintablesOurAngryBadger
Bambu Studio OrcaSlicer / SoftFever Profiles for X1 Carbon
OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…
- Pobrania
- 6979
- Polubienia
- 673
- Ocena
- 4,96
P
PrintablesBN3D
Low-Profile Ikea Skadis Stand
This is a simple easy to print design to convert an Ikea Skadis into a freestanding pegboard. The feet attach to the board using the supplied Ikea hardware. I've uploaded two designs: one with space for an M4 hex nut, and another which…
- Pobrania
- 6867
- Polubienia
- 1607
- Ocena
- 4,91
P
PrintablesAdam L
- ABS/ASA - Tuned X1C Print Profiles for Bambu/Orca-Slicer
Changelog: Added Polymaker Polylite ASA (4/20/23) Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf (4/30/23): Fixed the ASA profile to have the filament…
- Pobrania
- 6683
- Polubienia
- 406
- Ocena
- 5
P
PrintablesBasementLAB
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
- Pobrania
- 6411
- Polubienia
- 1967
- Ocena
- 4,85
P
PrintablesKILLbabylon
Ender 3 V3 SE 25-40mm fan bracket - Low profile
Hello, I've created a low-profile bracket for this annoying 25mm fan. This is the second version of the bracket. I'm sharing the model now because I finally received new fans and was able to properly test its performance and it works as…
- Pobrania
- 6364
- Polubienia
- 670
- Ocena
- 4,92
P
PrintablesMyUsernameIsDavid
Elegoo Neptune 4 Profile For Prusa Slicer
How to setup the profile: Go to File → Import → Import Config Bundle and select the .ini file. Download this program and go to Print Settings → Output options and replace “thumbnail-path-here” with the path of the program you downloaded…
- Pobrania
- 6175
- Polubienia
- 108
- Ocena
- 5
P
PrintablesVC Design
Low Profile Wall Mount
If you want to support me you can now nominate me and my designs for the Printables Awards 2025! :) The Low Profile Wall Mount is a compact and durable mounting system designed for quick and clean installations. The mount features a…
- Pobrania
- 5972
- Polubienia
- 3021
- Ocena
- 4,81
P
PrintablesRockChewer
Sunlu & JAYO Bambu X1C Profiles for PETG and PLA Plus
For the person who asked for dialed in settings for Sunlu, these are the ones I use. Hope they are useful for you all.
- Pobrania
- 5818
- Polubienia
- 166
- Ocena
- 5
P
Printablesmowcius
PrusaSlicer profile for Bambu Lab X1 Carbon (0.4mm) BS 01.02.00.09
This printer profile is a copy of the profile from Bambu Studio (01.02.00.09), with the placeholders and variables adjusted to fit the PrusaSlicer style rather than the Bambu Studio style. The linear advance (flow calibration) is not…
- Pobrania
- 5511
- Polubienia
- 172
- Ocena
- 4,8
P
Printablestchoupshop
Skadis T-Clip System - Low Profile Flush Mount Clips
These are an alternative clip for @LineArcLine's excellent Skadis T-Clip System. This version shortens the clip so that it does not protrude beyond its mounting recess and will not interfere with anything in front of it. Both painted and…
- Pobrania
- 5375
- Polubienia
- 449
- Ocena
- 4,97
P
PrintablesWebbes
Cherry MX Low Profile Keycap
This is a keycap for the low profile Cherry MX1B-L2NA switch. It prints perfectly on a Prusa Mini with 0.15 mm layer height. The keycap is easy to put on, doesn't fall off and is still easy to take off. Created this basic keycap in…
- Pobrania
- 5277
- Polubienia
- 361
- Ocena
- 4,85
P
PrintablesAdam L
- PETG - Tuned X1C Print Profiles for Bambu/Orca-Slicer
Change log: Added a PA-tuned profile for Bambu's PETG-CF (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament. I do not recommend it. Added Overture Army Green PETG (4/20/23) Added California Filaments…
- Pobrania
- 5167
- Polubienia
- 506
- Ocena
- 4,62
P
PrintablesBillyMayonaiz
P1P TPU Profile Configurations - Black Overture TPU
**This original config was made by Florian Greco, I just adjusted the config to be more in line for P1P usage** The files in this post are made to be imported to Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as…
- Pobrania
- 4993
- Polubienia
- 145
- Ocena
- 5
P
PrintablesLayer3D Creations
Anycubic Kobra 3 Orca Profile V2 - Tested & Verified with 6 Configs + Heatbed STL
This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some…
- Pobrania
- 4843
- Polubienia
- 274
- Ocena
- 4,33
P
PrintablesEA3D
extruded aluminum profile
All parts created with solidworks aand rendered with solidworks visualize. You can simply resize the parts and use it
- Pobrania
- 4750
- Polubienia
- 1907
- Ocena
- 5
P
PrintablesCarl Perkins
Ender 3 V3 SE Orca Profile
Hi, I was struggling to get a working profile under Orca Slicer until they added a base profile for the V3 SE. However, it still did not lay down a proper initial layer and when it did it stopped extruding from layer 2 onwards. I think…
- Pobrania
- 4596
- Polubienia
- 149
- Ocena
- 5
P
PrintablesmrFenyx
Anycubic Kobra 2 Pro - OrcaSlicer Profiles
Hi everyone, since official profiles for the Anycubic Kobra 2 Pro are not available for OrcaSlicer, I created one based on the official profiles that Anycubic made for PrusaSlicer with a couple of improvements such as easier to remove…
- Pobrania
- 4480
- Polubienia
- 122
- Ocena
- 4,2
P
PrintablesBuggi
T-Nut M3, M4, M5 for 20mm profile
These are T-Nuts for the common 20x20mm Aluminium Extrusion profiles many printers are made of. I designed them for my Profore Original 3D-Printer to attach things like cable clamps etc. While designing, I learnt that the profiles look…
- Pobrania
- 4479
- Polubienia
- 198
- Ocena
- 4,79
P
PrintablesAdam L
- TPU/Flexible - Tuned X1C Print Profiles for Bambu/Orca-Slicer
Changelog: 4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added…
- Pobrania
- 4357
- Polubienia
- 419
- Ocena
- 5
P
PrintablesDicko
Corsair K60/70/80/90/95 Low Profile Keycap Set
Here's a basic keycap set I made for my K95, but will likely be compatible with any Cherry MX based key switch. Includes all keycap sizes as individual files - feel free to mix and match to create your own colour set. The keys feel good…
- Pobrania
- 4254
- Polubienia
- 394
- Ocena
- 4,92
P
PrintablesThe Next Layer
Gridfinity Caliper Holder - Low Profile Space Saving
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
- Pobrania
- 4012
- Polubienia
- 569
- Ocena
- 4,71
P
PrintablesRenanAz
Updated - FLSUN V400 OrcaSlicer Profiles
UPDATED profiles for OrcaSlicer 1.9 and up. ( Download the slicer here ) Sharing some 0.4 and 0.6 profiles for the Flsun V400 using OrcaSlicer. Files are for Vanilla Klipper or Flsun Klipper (only difference is the Start and End gcodes).…
- Pobrania
- 3914
- Polubienia
- 123
- Ocena
- 5
P
PrintablesBrotDasBernd
Anycubic Kobra 2 Max Orca Slicer Profile
Anycubic Kobra 2 Max Profile for Orca Slicer Manually copied the settings of the K2M Prusa profile into the default Orca Slicer Kobra 2 profile. Maybe something can be optimized, but it's working fine! Also added a found bed stl file.…
- Pobrania
- 3880
- Polubienia
- 94
- Ocena
- 5
P
PrintablesAdam L
- PLA - Tuned X1C Print Profiles for Bambu/Orca-Slicer
Changelog: (7 /18/23): Added Prusament Marble Grey PLA (5/20/23): updated / retuned Prusament Galaxy Black PLA. Improved PA value. (5/16/23): updated Sunlu_White_PLA+ and Sunlu_Grey_PLA+ with better PA values, min layer times, and retract…
- Pobrania
- 3853
- Polubienia
- 418
- Ocena
- 5
P
Printablesschuetzi99
Anti-vibration feet for Ender 3 and other printers with 4040 V-Slot profile
These feet here are designed for all printers, which are using V-Slot 4040 extrusions as frame. So if these feet are working with your printer, and your printer is not listed yet, please tell me, so I can add the printer to the list.…
- Pobrania
- 3833
- Polubienia
- 669
- Ocena
- 4,91
P
PrintablesLayer3D Creations
Anycubic Kobra 2 Neo PrusaSlicer Profile V2
This profile is the V2 of my previous profile that offers fantastic print quality over speed, ensuring that your creations are meticulously crafted with precision and detail. This profile will allow you to achieve the same fantastic…
- Pobrania
- 3799
- Polubienia
- 82
- Ocena
- 5
P
PrintablesStarrEngineer
Customizable Plate Bracket for Aluminium Extrusion Profiles (Misumi 2020, 2040, 4040, ...)
This is a port of https://www.thingiverse.com/thing:2503622 , by mightynozzle. I do not claim ownership of the model . I had a hard time finding something like it on printables, so I ported it here. The following text is taken straight…
- Pobrania
- 3795
- Polubienia
- 846
- Ocena
- 5
P
PrintablesJustinas Valčiukas
Extruded aluminum profile 2020 2040 3030 4040 4080 8080 with T-nuts
Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…
- Pobrania
- 3646
- Polubienia
- 1017
- Ocena
- 3,5
P
PrintablesTycho Design
Extruded Aluminum Profile Collection
Collection of screws extruded aluminum profile including : 20x20, 40x20, 30x30, 60x30, 40x40, 40x40L, 80x40, 80x80, 80x80L L = Light Weight
- Pobrania
- 3636
- Polubienia
- 1300
- Ocena
- 4,8
P
Printablesjk_printer
Ender 3 Pro low-profile rear mount for Meanwell PSU
Updates 03/2022: Changed two screw holes on the switch side part to slotted holes (v2.1). This allows you to tune the fit and tension during assembly. 04/2021: Added a "MIRRORED" version, which allows you to flip the PSU around and have…
- Pobrania
- 3549
- Polubienia
- 503
- Ocena
- 4,76
P
Printablesevandrowsky
Creality K1 0.2mm Nozzle Profiles (for minis) (Orca Slicer)
Y'all know that FDM printers are not ideal for printing minis but hey, it's possible, and you can get pretty damn good prints if you tune it correctly. Main things I've noticed made a difference were : Layer Height, of course The printing…
- Pobrania
- 3421
- Polubienia
- 139
- Ocena
- 5
P
Printablessuit
Modular Hydroponic Tower Garden (Dispenser Lid Low Profile)
since the original cap was way to high for me needs, i made it low profile, but this did not distribute the water well enough, and it tended to splash on one side - so i added this “knob” in the middle, that solved this issue prints with…
- Pobrania
- 3284
- Polubienia
- 186
- Ocena
- 5
P
PrintablesMatt Willis
Ender 3 v3 KE Orca Profiles
Here are the Orca Profiles that I setup to get quality but quick prints
- Pobrania
- 3154
- Polubienia
- 140
- Ocena
- 5
P
PrintablesDon't Panic Studio
Milwaukee Packout Compact Organizer Internal Profile Blank
This is a CAD blank for the internal profile of the Compact Milwaukee Packout Organizer. I have supplied both the original fusion file and a .step file. Feel free to use it as a way to satisfy your endless urge to organize as as a kind of…
- Pobrania
- 3134
- Polubienia
- 469
- Ocena
- 5
P
PrintablesDarian
Anycubic Kobra 2 Neo Orca Slicer Profile
This is my Orca Slicer profiles for my Anycubic Kobra 2 Neo. PLA Filament profile included (Sets the bed to 45 degrees). I took the PrusaSlicer profile and converted it to Orca Slicer. If it helps please consider leaving a review and a…
- Pobrania
- 3053
- Polubienia
- 99
- Ocena
- 5
P
PrintablesKaminoKGY
Anycubic Kobra 3 Combo Slicer profiles for Anycubic Slicer (PrusaSlicer coming)
Please give it a 💖 if you like it 🥰 🪧 My 8 colors Splitter for Kobra 3 👉 https://www.printables.com/model/1019258-8-colors-on-anycubic-kobra-3-combo-splitter-for-8 Please leave a comment if you have any possible improvements to make to…
- Pobrania
- 2991
- Polubienia
- 101
- Ocena
- 5
P
PrintablesGreenBit
Updated! My Prusa Slicer profile for Anycubic Kobra 2 Pro
This is the profile I have made for my Anycubic Kobra 2Pro with Prusa slicer based on many experiments and 3d model testing. and I got some amazing results. Well, lately I got down the rabbit hole of tuning, tweaking, and upgrading my 3d…
- Pobrania
- 2988
- Polubienia
- 71
- Ocena
- 4
P
PrintablesR3tr0_D
CREALITY K1 / K1 MAX PRUSA SLICER PROFILES (PLA + PETG)
Prusa Slicer Profiles for Creality K1 and K1 max The model is just there, cause I needed one to upload the Profiles. Can ignore it. There are two config files. load both Included : - PLA high flow Material Profile (Custom Gcode Added for…
- Pobrania
- 2942
- Polubienia
- 94
- Ocena
- 4