2264 modeli
I did not make this model, but decided to upload it here so it is preserved. Just in case it gets deleted from official site ( https://projecthailmary.com/ ). 3D Model Print Instructions: Grace Sculpture Keychain This model includes two…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
Wydruk około 4,10 €–5,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Extrusion machine which allows plastic bottles (PET) to be recycled into printable filament for a 3D printer. I have made a guide in .pdf format, which summarizes all aspects of the machine with information.…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's hard to find project boxes with just the exact dimensions you need and even harder to cut square holes in the them. This OpenSCAD generated model is parameterized in width, depth, height and wall thickness. Set the dimensions you…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
Has a 10mm flat bottom to print on bed. SIZE: 20mm ball SUPPORTS: NO BRIM: OPTIONAL
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
I discovered the amazing Print-In-Place Working Cannon model from Makkuro . It's amusing and very well designed toy. I decided to add another projectile variant to this model. The default projectile is a simple sphere, so I created…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is a remix that I did off of zx82net's Universal Parametric Project Box. I sized it and added the cutouts to fit 4 Neutrik D-Series connectors. Requires 4x M3 Screws, 6 to12mm long to close the lid. Uses M3 screws and M3 nuts to…
Wydruk około 4,93 €–6,02 € nettoWstępna wycena jednego wariantu
A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…
Wydruk około 3,03 €–3,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed as a stand for the awesome XGIMI Elfin Portable Videoprojector whose size is 19.2 x 19.4 x 4.8 centimeters and weights less than 1kg, but the stand can surely bear heavier devices, just not sure how heavier. [edit] I added the…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
Martin is the king of Stargate models. Since Martin's model was uploaded, the PrusaSlicer added the ability to paint MMU colors directly onto models. As such, I went ahead and remixed his excellent model and painted a few of the model…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
This clip allows you to easily attach to a Ryobi One+ 18 Battery for your DIY projects. It uses the Ryobi 30001044 replacement terminal that snaps in. No soldering required, it uses standard 1/4" female wire terminals. I've added two…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
This clip allows you to easily attach to a Ryobi One+ 18 Battery for your DIY projects. It uses the Ryobi 30001044 replacement terminal that snaps in. No soldering required, it uses standard 1/4" female wire terminals. Parts: Ryobi…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
V3 - Larger fins for structural strength and stabilization Outer Diameter 23 mm Recommend cutting the model in half about 3/4 up with Prusa Slicer and having denser infill at the top (100%) compared to the bottom (50%-80% Grid). Print…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
I have included my files, but your conditions may vary. With a large model, I found it useful to print with a draft shield.
Wydruk około 7,35 €–8,98 € nettoWstępna wycena jednego wariantu
A plant pot inspired by the intricate structure of a slide projector. Used Filament: This model was printed using PLA Mineral Natural from Fiberlogy. The PLA Mineral series is our all-time favourite! The amazing texture of the finished…
Wydruk około 4,09 €–5,00 € nettoWstępna wycena jednego wariantu
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
A Arduino/ESP8266/NodeMCU based RS232-MQTT-Bridge to control a beamer via the serviceport. You find the Firmware on my GitHub-Repo: BeamerControl Print instructions Parts 1x NodeMCU V2.x 1x MAX3232 RS232-to-TTL Adapter 4x 2.5mm Heat…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
This is the final prototype for the Arduino RC boat project. This boat has slots in the aft section for a micro electric motor and two 9v batteries. The aft cover is designed for use with a micro servo. The Arduino will control the motor…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
When designing a 3D-printed river model, remember that rivers increase in size and volume as they flow from their source to their mouth. They always flow downhill due to gravity, taking the path of least resistance. This causes rivers to…
Wydruk około 8,77 €–10,72 € nettoWstępna wycena jednego wariantu
Projector HY300 Cover This 3D model is a protective cover for the HY300 projector. It is designed to cover and shield the projector lens from dust, scratches, and other damage when not in use. The model is lightweight, easy to attach and…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
Some people got together to hack the communication protocol of a popular micro inverter by hoymiles so that you can see the internal values and send them on via MQTT. You can find the conversation here (in German) and the code here . I…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Credit to the Original Creator This model is inspired by the classroom project “3D Printing Truss Bridges” created by the user “PolarCloud” and published on the website https://www.instructables.com/3D-Printing-Truss-Bridges . Bridge…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
I printed the fantastic Propeller Launch Base by @WimV and wanted to try my hand at making my own propeller. The design here is the result of testing over 20 designs to maximize the height the propeller flies for a given number of…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
Wydruk około 4,38 €–5,36 € nettoWstępna wycena jednego wariantu
Project Overview This project was developed for the Master's in Electronics Engineering (Design & 3D Printing). The goal that i was looking for was to design a monolithic instrument compliant with Field Ready standards for humanitarian…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a small box for my electronics projects. I tend to use the same Feather sized boards with the same protoboard for most projects. I couldn't find something out there that already fit my requiresments. So i designed it myself. It's…
Wydruk około 3,56 €–4,35 € nettoWstępna wycena jednego wariantu
Joint or Hinge component to be used in other projects . Allows you to create bit more sophisticated objects that have articulated parts. Enjoy. Feel free to remix etc. Created in Fusion360, however next iterations might be created in…
Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu
If you have a projector with those discs, then print the box to avoid any damage or loss of loved discs. Stl file is for projector Mideer. It's modified coin cell storage box. The main difference is the little axle on one side of the…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
****THIS DESIGN IS PROPERTY OF BEEKINDCROCHET. THIS IS FOR PERSONAL USE ONLY AND MAY NOT BE MADE AND RESOLD. THIS GOES FOR BOTH THE FILES AND FINISH PRODUCT MADE WITH THE FILES OR ANY VARIATION THEREOF. This tab design was made by me on…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
So I'm trying out a concept with this design - which featured in my OLED model here: https://www.printables.com/model/1172417-gridfinity-1x1-oled-display-ssd1306 I have added 2 layers of ribs around the bin. These will ‘click fit’ a 1mm…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
This is a 15 degree bracket/frame used to hang my universal projector mount from my ceiling. Please note that there is one superior printing direction! See images. When printed on its side, no supports are needed, and the layers will be…
Wydruk około 7,85 €–9,59 € nettoWstępna wycena jednego wariantu
I mounted it to my wall via sticky tac, but feel free to to try other meathods Put spacer between the body and the wings when mounting Change Filament twice while printing for color changes Made in Onshape
Wydruk około 2,63 €–3,21 € nettoWstępna wycena jednego wariantu
enclosure for the ESP32 Network Blocker (Internet Kill Switch) - Project 1 as found here: rlatour.com/esp32networkblocker
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
This is a modified version of the Steamdeck dbrand Air Tag by InsaneNemesis that includes the mounting pins from the official dbrand universal mount lock. You will have to download the original mounting plate from dbrand in order to make…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
enclosure for the ESP32 Network Blocker (Internet Kill Switch) - Project 2 as found here: rlatour.com/esp32networkblocker
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Wall holder for Epson remote controller: 219863800. The remote control is used for several projectors, such as EH-TW7000, EH-TW7100, Home Cinema 3200, Home Cinema 3800 and more.
Wydruk około 2,14 €–2,61 € nettoWstępna wycena jednego wariantu
Zwei dieser Griffe seitlich an das Gehäuse PrintClosure Project montiert und erleichtert das Heben und Bewegen. Der Lochabstand für die im Gehäuse vorhandenen Schrauben beträgt dank der Langlöcher von 50 bis 54 mm. Translation: DeepL Two…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Added version without cutouts in case you want to use another cable routing system. I used those 24V toggle switches (37 x 28 x 42mm/1.46" x 1.1" x 1.65") and this high CRI LED strip (they are getting pretty hot, so I have them in an…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
Um die LED-Beleuchtung des Gehäuses zu schalten, habe ich Montagematerial für diesen Schalter konstruiert. In die Seitenwand des Gehäuses werden Bohrungen mit einem Durchmesser von 26 mm und 3,5 mm angebracht. Das einfache Schutzgehäuse…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Es handelt sich um eine geteilte Kabeldurchführung, die die Kabel vor Beschädigungen durch scharfe Kanten schützt. Ich nutze sie für das „ PrintClosure Project ”, um den Kabelstrang des Netzteils nach außen zu führen. Die Acrylglasplatten…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Have fun with it! It worked perfectly to print it without support material
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Diese Halterung wurde für das schwarze Netzteil des Prusa MK3 entwickelt. Damit kann es außerhalb des Druckergehäuses befestigt werden. Wie die neue Kabelführung aussehen sollte, lässt sich gut aus der mehrsprachigen Anleitung von Prusa…
Wydruk około 4,46 €–5,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Im Rahmen des PrintClosure-Projekts , bei dem ein Druckergehäuse gebaut wurde, habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Der Ausschnitt hat die Abmessungen 46,5 x…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dies ist eine Halterung für diese LED-Streifen . Sie ist beweglich und kann somit blendfrei eingestellt werden. Der Druckraum des „ PrintClosure Project “-Gehäuses ist sehr gut ausgeleuchtet. Die ca. 11 W/m starken LED-Streifen werden mit…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Before you go further! This project is for personal use only. Any commercial use is forbidden Follow me on Instagram @StawiamKlocki.pl to keep up with latest designs Go to Google Sheets to get files list for your LEGO models Watch General…
A fully parameterized project box to customize for any of your electronics projects. Fusion 360 archive and STEP file provided. Material efficient, quick to print, dust proof. Requires 4x M3 Screws, 6 to12mm long. If you like it or…
This model comes in two different types, if you want just a figure then click on the figure folder, there is a version with supports and one without. If you want a posable action figure then click on the action figure folders, again, one…
Version 3 (03/22/2026) It's everyone's favorite Eridian! Based off of the blockbuster film Project Hail Mary adapted from the Andy Weir Novel. Print the quantity specified in the file name, the hands are your choice. Print with ASA or…
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to build a very smart and low cost geometric lighting system. Meet Geoleaf, my low cost and 3D printable version of Nanoleaf lighting…
This is an enclosure I created while making my BMO embodied local AI agent. A full video break down of the project is available here: 🔧 Additional Hardware: Raspberry Pi 5 (16GB) Pimoroni NVMe Base Duo Geekworm X1203 5V UPS shield…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
Features A magnetic connector for low-powered, removable electrical connections Fits two 6 x 2mm neodymium magnets (Edit: Added files for 6 x 3mm, 5 x 2mm and 5 x 3mm) Compact and easy to build into your models - roughly 10mm tall and…
Amaze! Amaze! Amaze! Straight from the 40 Eridani system (and the official movie website), I have collected and optimized the official Rocky STL files for us leaky space blobs to print at home. While the original files are incredible,…
Greetings, fellow enthusiasts! I'm thrilled to share this 3D printed Raspberry Pi NAS project with you. I hope you find it not only enjoyable but also adaptable to your unique requirements. I am always eager to receive feedback to enhance…
I saw a bunch of 10in server racks when looking to get started with a HomeLab to tinker. Everything was built on an ender 3v2 so some parts have to print solo at an angle to accommodate the bed size. I used overture PLA The Lenovo…
Źródło oznaczyło ten model jako treść 18+.
This Universal Mount is designed to allow you to connect accessories (e.g. battery banks) to your Project Killswitch. The Universal Mount is comprised of two components (Lock and Plate). They can be assembled using two-part epoxy or…
Printed Enclosure Project for Prusa MK4/S - PrintClosure Info: External dimensions - 520x520x620 (XYZ) Internal dimensions - 490x580x490 (XYZ) Can be printed even on smaller footprint printers (like Prusa Mini). Uses printed pins and…
Further details about project can be found here . Project 376 "Yaroslavets" (Ярославец) is a Soviet and Russian riverboat. It was designed in 1953 and since then was manufactured in huge quantities. A lot of these ships are still used by…
The included files are a mounting bracket for the Magcubic Projector HY300 PRO. All the models available did not work for me so i had to make my own. The features include Support free design Can print in 2 orientations (Flat and Standing)…
I did not make this model, but I would have liked to. The movie is amazing and this print is also awesome.
This is a fully 3D Printed Stirling Engine made by New Zealand ProjectsToPrint (now defunct). It only requires a printer, printer materials and a few basic home tools and materials to make. It is powered by hot and cold water. This does…
An universal mount for Samsung Freestyle projector. It will be used for wall mount but it should work also for ceiling mount. It is shaped to avoid limiting adjustment projector position. There are two 4 milimeter holes, to secure it on…
When doing electronic projects there always is the search for a housing. There are plenty on the market but rarely fit the exact size and usually can not be considered cheap for some molded plastics. In addition much mechanical work needs…
3D Model Print Instructions Rocky Action Figure Instructions This model includes 2 figure style option: ● Articulated Action Figure (1 body and 11 limb pieces) ● Statue (1 static posed figure) Both model styles include two file options :…
I 3D printed “Grace” from Project Hail Mary using a free model straight from the official movie website.
A 100% 3D-printed 7.23L custom one-off Mini ITX case sporting dual 4mm tempered glass side panels, a custom watercooling loop with a 45mm thick 3x80mm radiator, and a hand-built custom pico-psu. Project log on SFF Network:…
Various Gridfinity models to hold utensils. A specialized bin for utensil pairs, such as table/tea spoons or salad/dinner forks. I found that my tablespoons in particular had trouble fitting into 1u wide Gridfinity bins, so this design…
Inspired by Daniel Norée's openrc F1 project I wanted to build a remote controlled Formula 1 car of my own design and fixing the ‘flaws’ of his car. I wanted my car to have a fully independent suspension utilising pushrods and not just…
Here are both pieces required to integrate into your project that needs access after making for battery replacement, on/off switches or storage. The cover or door itself was heavily influenced by https://www.thingiverse.com/nimaid 's…
Ever wanted to build an UK Ant weight / US Fairy weight, but you've had no idea where to start? The SVRN platform is a system I've developed and extensively battle tested over the last year to help get you started. The base robot is a 4wd…
To demonstrate how simple and multiple chain hoist/pulley block work we need to have one or more pulleys. A functional single or multiple pulley is the result of this project. It can demonstrate the transmission of forces and weights in…
Your favorite Alien comes to life!!!! print at 700% to make him lifesize. I hope you enjoy!!!! An official version of the Rocky model was uploaded to the Project Hail Mary website (available here ). It is dimensionally accurate and highly…
This is a project where I designed and printed a model of the Mothership that belonged to the mighty god Apophis in the Stargate series. The ship comes with its landing platform and has one feature - those retractable pylons that were…
The Samsung Freestyle projector uses low-profile 1/4" tripod screws to attach the stand to the body, and I lost one of mine, so made this as a replacement. It is low profile, so you can still fit the projector in the case with its…
The gridfinity system from Zach Freedman ( https://www.youtube.com/watch?v=ra_9zU-mnl8 ). called out to me, but I was similarly inspired by the modular project case design by Alexander Chappel. So this is a 4x5 gridfinity compatible…
This is my 3D printed model of the Ha´tak class Pyramid ship from the series Stargate SG-1. Model is completely made by me with a sole idea to be assembled like a lego. No glue is needed at all. If you want to make it for yourself, here…
Made a project box for the ESP32 WROOM (although most ESP32 boards have the same form factor), with a lid for the 0.96" OLED screen. It houses multiple access points for wiring, and a small 10mm slot for the touch sensors. I use a folded…
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
Been wanting to do a full size K2SO for my Man Cave for a while and I see there is a really cool one over here http://www.thingiverse.com/thing:2038000 ,but I found this really detailed model over with the guys on FacePunch.com "Only…
Version 1.2 Added 2 new parts that are specific to mounting in the top “Pie” location. TopHoloFrameServo and TopHoloLockRing. Intended Design/Use I designed these parts for mounting MG90S servos and Astropixels to MrBaddeley's MK4 R2-D2…
This will be an on going project of scanned portraits of makers from YouTube and Instagram. Download your favorite maker. Collect, modify and print them all. This project is made possible with assistance from Shining 3D and the Einscan HD…
ball diameter 12 mm with bevelled bottom
*6/11 Update: Still working on some new bell designs to get a better sound. Will post the files and video soon! Updated the mouthpiece files. Note: This is an ongoing project and I will be making modifications to the design as I'm able to…
This is my Project Trebuchet. 3D printed model a pedestal. More, you can find here on my YT channel: https://www.youtube.com/playlist?list=PLyHwaiEHdyZruxSmANcpdu5kfF3HwPKXv
Last year I designed a linkable knitting loom system that would allow users to add/remove links as they work for increases and decreases. This is FAR more usable than the standard round loom because you can easily modify stitch count and…
A Hologram projector prop as seen in the star wars films/tv shows. This design is based off of that seen in the pilot for Obi-Wan Kenobi on Disney+. Adjust scale in your slicer of choice to make sure main body and antennae are at the same…
Easy box for electronic projects by pbtec There is a newer Version available. See https://www.printables.com/model/863273-easy-customizable-openscad-electronic-project-box Use Openscad customizer (Menu Window/unselect "hide customizer")…
I decided to share the unmanned ground vehicle project I made to improve myself by publishing all the design files and material list. The design process took 1 week, printing time 1 week (with 2 printers and 0.6mm nozzles). It is very…
The box is not 100% watertight but does have a pretty good seal with the stepped way the lid screws on. All you need is 4*m4 screws
Description PDF This is the third version of my vertical axis wind turbine. (V.A.W.T.) This third version is completely inspired and modified by the Aeolus project. In the future I will publish other changes after carrying out the first…
This model is the ship from the movie Project Hail Mary which is based on a sci-fi novel written by Andy Weir. If you are using the individual file folder, print the fuel tank 3 times. The main engine file exists in both folders. I have…
These are various styles of projectiles that fit in Adam-M's Catapult Card https://www.printables.com/model/211679-catapult-card . I printed the catapult in PETG, but didn't have anything to shoot in it, so I made these to fit nicely in…
EDIT: Added Version 2.7 .step & STL files Added updated version of the guide (Thanks Tyra_Nerf and the other reviewers) Hi there and welcome! Thanks alot for checking out Mjölnir - We've been so excited to share this with you, that we…
Features A 3-pin version of my magnetic connector for low-powered, removable electrical connections Fits various sizes of magnets from 5 x 2mm up to 10 x 3mm Compact and easy to build into your models - the 6mm version is roughly 10mm…
![Modular Display Stand for LEGO Star Wars / DC / City [Main Project]](https://media.printables.com/media/prints/267597/images/8102146_4a778b8f-e3b6-4ded-82a1-d47a535d9e47_03546910-d95f-4a36-8f71-1214f98a583e/cover.jpg)
