105 modeli
The mout should work with all Garmin GPSMAP devices (tested with GPSMAP 65s). The mounting holes are spaced accordingly (31x41mm, ⌀ 5mm). The mount is very tight initially, but it gradually becomes a little looser and easier to put on.…
Adapter für den "Bosch PSM 18Li" zum osVAC System. Innendurchmesser: 29,80mm also für 30mm Anschlüsse vom Gerät. (Passt mit etwas Kraft perfekt auf den Schleifer) Allgemeine Infos zum osVAC System: https://ossso.de/osvac/…
I needed something to protect my solar filter… so I designed a rudimentary one in Prusa Slicer. It’s not great but it works for me. The slicer wouldn't export a .stl file for the bottom piece, so I only have the bgcode file for that for…
The original grinder shields were broken, so I made a replacement. I tried printing new shields in transparent PETG, but I couldn't get them clear enough, so I bought a clear acrylic plate 4mm and printed frames in black ABS instead. I…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Vacuum Adapter for Bosch PSM 80 Multi-Sander. Multi-Sander side 30 mm diameter Vacuum Side designed for Tube with 47 mm diameter. Miele vacuum cleaner Happy printing!
This is an adapter to connect the Kärcher Vacuum Cleaner to a Bosch multi-sander. It has an intentional tight fit on both ends. Add grease before attaching the adapter. The nozzle on the Bosch multi-sander has a diameter of 29-30.5mm and…
Holder for a 35mm Bike Handlebar. Its a Remix but i can't remember the source Thing. I remixed it to fit on a 35mm Handlebar with a Short stem. You can use 2 Cable ties to fix it on the Bar. I placed a small thin part of a bicycle tube…
Fahrradhalter Garmin GPSMap 60 Cx. Die Lenkradklemme muss entsprechend dem Lenkstangendurchmesser angepasst werden. Klemmenzeichnung im Stepformat ist hier dabei.
I acquired an older model Shopsmith Mark V for next to nothing from a lady while on a service call. Several pieces were missing, one such piece being the coupler that connects the motor to the bandsaw. Shopsmith sells this adapter for…
On wall Rack/Holder for the ShopSmith extension table tubes and legs. This rack uses #8 wood screws to fasten each side to a wall stud (16" apart) and is a nice compact way to store the tubes and legs when not in use. I printed mine out…
This is a remix of I\_d's neat Molle Clip for GPSmap handhelds. I made one to use with my Garmin GPSmap 60Cx. Used it. Loved it. Broke it! So beefed it up a bit....and back in GPS-trail-tracking business. Print instructions Printer: Prusa…
Created just for fun to help spread joy and cheer to all the K2 Filament Clip fans this holiday season. Prints without supports and snaps/slides together. A drop of glue make be used to attach the tree base to the tree top if used as a…
Bandsaw table insert for Shopsmith brand
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC Corpsman unit . The…
I redesigned the Garmin Ni-MH battery charging adapter from Thorius It pushes the button between the two batteries, so the device will charge them when plugged into USB. I made it 20mm short, so if you use non chargeable Alkaline you can…
This is a sharpening jig for the Shopsmith lathe chisel set. The intent of this is to replicate the functionality of the sharpening jig that has been discontinued. The sharpening guide allows you to sharpen the Shopsmith lathe chisel set…
This adapter allows connection of a 2.5" dust collection hose to the top of a Shopsmith Mark V 510, 520, or Mark 7 upper saw guard for overhead dust collection. Based on the concepts and ideas of William H Seward IV. Many thanks to…
Shopsmith does not sell this part separately, and I didn't want to buy the pricey “upgrade kit” for just one part. I printed this in both PLA and PETG. Both are acceptable but PETG is the better choice. Increase number of walls to ensure…
Saw various knobs for sale in internet, so I created my own free version. Fits perfectly.
Insert for Shopsmith cast iron bandsaw table. Slot to the right of center. If you need the slot to the left, simple mirror the 3MF left to right in your slicer. There are three small nubs on the outer rim for sizing. Sand or file for a…
The terrific original by Bwolfey is too tall for Shopsmith miter slots. These are simply his design thinned down to .276" (7mm) in order to fit the Shopsmith. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Doesn't…
The mini SD card used by the Monoprice Select Mini is difficult to handle and can easily be lost. This simple handle permanently holds the card and can be easily inserted into the MPSM slot as well as SD card readers. The card fits…
This is an upgrade for the Monoprice select mini. Board and display is swapped to SKR v1.3 with TMC2208 drivers and TFT24 display. Printer is running silent with Marlin 2.0 and all safety features turned on. Required components:…
I took the "Garmin Mounting Clip by HAMMER_T August 23, 2018" from thingiverse and made some changes to get a simple holder for a Garmin GPS MAP 64 S. The changes were: scale in z-size by 2.5 %, to get more room to click in. made a bigger…
I used PLA for mount and TPU95A for gasket and ties Also, fusion 360 files are attached
I figured that if I'm going to be staring at my printer while leveling the bed, it might at least be interesting. This should be printed without any build plate adhesion, and infill and support doesn't matter. I've included a basic file…
Per request: ShopSmith Logo Large, both with and without hanging holes Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how…
Printing as 100mm square, set layer height to .13125. Category: 3D Printing Tests
There are a few models here that show a ‘missing layers’ warning. This is not a remix, I modeled this based on my Mark V SS with the cast iron table. It's a snap fit and provides enough room even for my ½" resaw blade, though there might…
Dust fitting, 16-inch jet bandsaw to shopsmith dust collector Print instructions Category: Parts Summary Dust fitting, 16-inch jet bandsaw to shopsmith dust collector
This flip stop is designed to work with the Shopsmith 510 rip fence, 520 rip fence and the band saw fence. It allows you to easily make repeated cuts or drill consistently placed holes. The hardware below is easily obtained at any…
Progetto interamente di mio cognato il Pippi... io ho provveduto solamente a sliciare e stampare. :-D Project entirely by my brother-in-law Pippi ... I only proceeded to slice and print. Print Settings Printer: TronXY X5SA Pro Rafts:…
This Adapter connects the Boch PSM 160 A to the Kärcher A2204. Other models might work too. If you use it for a different model, please leave a comment on which ones are compatible with the adapter. Sander side: "Bosh microfilter system”…
These brackets, in conjunction with the extension table rods that come with the Model 520 table system, allow the use of the extension tables directly in front of or behind the main table, for infeed or outfeed support. You should still…
This is a 1/4" thick 3" diameter cover for a shopsmith jigsaw. Rather than trying to find an insert and cut it myself, I decided to just print it out of CF PETG for the chemical resistance in case I use coolants. Print Settings Printer:…
300mm long drive coupler for a Shopsmith. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 10%, any should work Filament: any PLA / ABS / PETG any Category: Tools
An arbor 5/8" diameter with a flat for the set screw.
Thanks for the excellent fan mount from kbowley . I also liked the mounting design from tgeehan & keco185 . Unfortunately both of these seem to cause uneven cooling with the 40mm fan. I have modified kbowley's design by adding a support…
Use M3 nuts and bolts for mounting
osVAC adapter for Bosch EasySander 12V also sold as PSM 10.8 or PSM 12 This tool is for the green series of Bosch, so the batteries for the blue 12V series won't fit and there is no comparable tool in the blue series. But you can simply…
Hatte bisher alle Sandpapierscheiben meiner Schleifmaus PSM 80 a von Bosch in der Schublade liegen. War ein Durcheinander. Nun ist alles geordnet und kann gestapelt werden.
same as title
Combined the two models to fit the printer. Print facing the fan mount down and with support touching build plate. After printing you can cut off the small supports from the mounting clips. The duct may collide with the tower housing. It…
Lässt sich einfach mit der Fase unten drucken. In den Öffnungen habe ich Stützen beim Druck verwendet.
Just a simple 35mm vacuum adapter for the Bosch PSM 160A sander.
A four pack organizer for Shure's P9RA wireless in-ear bodypacks (used with Shure's PSM transmitter series). Can fit in a 1U workbench organizer drawer (Husky) but the antennas poke out, so use 2U drawers or deeper. Comes with labels at…
A drumstick holder that clips to a stand
Cool your PCB stepper drivers with a 30mm fan. Includes nut traps for easy fan swaps.
Die Klapsmühle ist ein Scherzartikel, aber immer noch besser als die Windows-Sanduhr; oder wenn der Arzt Bewegung verschrieben hat... Alle Teile sind steckbar. Print instructions Der Schlitten wird 2 x benötigt; Die Wandstärken der beiden…
Tired of looking at a placeholder bed in PrusaSlicer when you are slicing models for your Monoprice Select Mini? Stare no more! just set these STLs in the Printer configuration for your Monoprice Select Mini and get a digital…
Print this slide on protective cover for Garmin Echomap 70 series (Echomap 70, Echomap CHIRP 73, etc) and color coordinate your boat interior. There are two sizes. The older Echomap 70/71 and GPSMAP 700 series were about 10 mm narrower…
This is a HelmPod suitable for flat or vertical surface mounting, and has a 24 degree tilt. This is best printed with a large nozzle, such as a 0.8mm Volcano in UV resistant material.
The original arm had wide holes and I prefer simple bowden solution. Made the holes smaller and made some space for the bowden tube holding by a screw. All modification are made in PrusaSlicer. Open the project and adjust to your needs.…
I remade the top part of BM Paridae's design with an opening of 36,5mm. Very tight fit, thanks!
Mixed the PSM adapter of Dr. Neis https://www.thingiverse.com/thing:4669221 with the Makita vacuum hose adapter
I needed easy access to my Shopsmith tools. Printed in black PETG Picture shows direct part was printed Strength 3 wall loops Sparse density infill 20%
This is an upgrade for the Monoprice select mini. Board and display is swapped to SKR v1.3 with TMC2208 drivers and TFT24 display. Printer is running silent with Marlin 2.0 and all safety features turned on. Components required:…
Shopsmith drive coupler, 300mm long Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 10%, any should work Filament Material: PLA Category: Tools
To use Festool cleantec hose on the Bosch sander. Vacuum side (inside-) diameter is 34.5mm
I already got my holders for my gpsmap device on all my N bikes. So I did not want to buy N other holders. Now I can use my garmin holders for the lezyne computer as well.
This is a fan shroud for MPSM v2 which holds 2x 40mm noctua fans and provides separate hodend and part cooling. No further disassambling of your MPSM is needed. Just remove the old fan shroud and relpace it with this one. I also added a…
I needed easy access to my tools. Printed in black PETG Picture shows direct part was printed Strength 3 wall loops Sparse density infill 20%
This is for a GE dishwasher model number gdf630psm3ss silverware basket model number WD28X24476 AFTER A TEST RUN PETG IS STILL TOO SOFT AT THE DISHWASHER TEMPS. NEED TO USE A HIGH TEMP MATERIAL WITH HEAT RESISTANCE. I WILL BE PRINTING IN…
I needed easy access to my Shopsmith tools. Printed in black PETG Picture shows direct part was printed Strength 3 wall loops Sparse density infill 20% No support
Neither of the 2 original nut designs for robkar's spool holder would work with the very reasonably-priced Hatchbox 1kg filament spools or 0.5kg 3D Solutech spools due to their small spool hole size. In fact, the smallest size supported…
This is a replacement idler wheel for the Shopsmith 1 x 42 belt sander. There are two styles of idler wheels. The older metal wheel with replaceable bearings and the newer plastic wheel with a bushing instead of bearings. The is modeled…
UPDATE: Added an alternate version ( currently untested ) with the following changes: New slim dedicated section for a scraper ( this one - scraper model 2) Wider general tool pocket behind the scraper section New EDC utility blade slot…
A simple adaptor to allow the Garmin GPSMap H1i Plus Cycle Mount to be used with the AMPS system. Garmin have still not released any mounting system for the H1 apart from the Cycle Mount. With an AMPS base this allows you to mount the H1…
Simple tool holder for the Monoprice Select Mini V2. Holds a couple of pliers, a scraper, a couple mini-files and a couple of allen keys. Does not interfere with the motion system. Re-uses the bolts of the printer. Prints upside down…
If you're running a Shopsmith, sometimes you need somewhere to put the rip fence. This can be attached to any suitable surface with screws, for just such a task. Lots of screwholes included, possibly an excessive amount, but, the rip…
EDIT: A remix of LazaroFilm's https://www.thingiverse.com/thing:2811140 I wanted a tighter fit and since there are no wires on the left side, I closed the U cutout. Fits fantastically on my Monoprice Select Mini v2 Q4of 2017 edition 3D…
After trying to create a complicated flexible standalone mount for my Monoprice Select Mini Pro, I realized there was a prime mount location for my smartphone webcam right on the end of the gantry. This mount is designed to hold a…
Clip it to the lead or even the harness/collar - pull the ends of a full bag through the holder! Easilly pulls back out without snagging! Hands free poopsmithing!
Adapters to get the Celestron EclipSmart Solar Filter ( for Starsense Explorer LT 80AZ ) to fit on an SVBony SV503 80ED telescope and a Nikon HB-77 lens hood. I bought the solar filter for the upcoming eclipse but it didn't fit well on…
Updated version of the 2 part panel remix Thing https://www.thingiverse.com/thing:2516945 . Finally got around to printing it (used my Monoprice Maker Select) Very pleased with the outcome
This is a holder for Shure PSM900 P9RA+ IEM bodyback with room for 6 batteries. I didnt find any on the internt so i made it. If it works for you super! If it dosent... feel bad for you. I m happy :D
Remix of this great mount by clearchris. Mostly just customized the holes and made a simple backet for my BLtouch v3. Heigh is not adjustable but should be set correctly from the mount already. Still a work in progress since i'm not in…
I added Scanjo's MPSM 45 degree mount ( https://www.thingiverse.com/thing:3243485 ), but lost my ability to use Bobarilla's filament guide remix, so I remixed it again. Just a quick and dirty swap on the ball to the back and extended it…
A spacer to adapt almost all knob-types from other printers to the Monoprice Select Mini II. It should work for all Minis and all knobs with 6mm holes.
Simple 4-sheet magnetic mount for the left side of the Prusa CORE One. Uses 15 (!) round magnets, 8mm x 4mm.
See original for installation instructions: https://www.thingiverse.com/thing:2029972 My original printing broke right above where the bowden tube and nut fit. Also, my MPSM has a thinner nut than the original accounted for. To fix those…
Mounts on build plate platform. no additional hardware required.
I need to store Shopsmith items, Kreg clamps and C clamps on the wall for easy access. I printed on black PETG on side for more strength. Printer Settings: Wall lopes 6 Space fill density 45% Enabled support for bed Type: Tree(auto)…
printed 2 times and can be used for different types of Garmin GPS Marine Plotters to stand at the Desk. printed with 4 walls and 11% standard infill
A small spring clip repair to hold the housing in place
Quick remix to center the wire mount. I haven't tested it yet. Category: 3D Printer Parts
Oil holder for Shopsmith. I needed easy access to my tools and supplies. Printed in black PETG Picture shows direct part was printed Strength 3 wall loops Sparse density infill 20% No support.
Desinged to be used with zip ties to mount the holder to the support pipes of the Shopsmith
This little piece is used to adjust the left side of your Monoprice Select Mini x-axis endstop switch. I created this because I noticed that the MPSM has a print area of 120mm, but the bed itself is 130mm. With this stop in place, the…
Needed to remix this part to fit on the mounting holes of the Select Mini v3/Pro and cut a corner out so the y-carriage would not crash into it. Not perfect but mounts and works well. Category: 3D Printer Parts
Just a simple adapter for a solar filter that I purchased. The lower portion is loose fitting, use tape for a better fit Printed this in black ASA so it wouldn't deform while in the sun
You will have to take off the end piece of uour vacuum's hose. This is not what you do under normal use, but is very easy to do with any medium sized screwdriver or a back side of a spoon or whatever fits in the slot. Should be very…
I bought a few spring powered BB pistols back in the day, with this Crosman PSM45 easily being my favorite. Great for backyard plinking without expense or having to worry about hurting anyone. After a while, the feeding became unreliable,…
I needed a taller version (don't ask, long story) so I just added 3mm Category: 3D Printer Accessories
This project provides a custom mounting solution for upgrading the Monoprice Select Mini v2 3D printer with a BigTreeTech SKR Pico mainboard and a Raspberry Pi 3A(+). The SKR Pico can handle 12v and 24v, so I took the opportunity to…
If you are like me and keep assembling to fast then you forget to run the wires through the back hole that attaches to the panel and the connectors do not fit so I resized that back port to fit the connectors after soldering lol Front…
This is a really old model I made in 2021 which improved the usability of the MonoPrice Select Mini V1. I always had trouble using the microUSB and SDCard so this panel has a recess so you can't miss it. It also has a 40mm fan mount with…
This is an end cap for standard shower head thread (12 NPSM - 3/4 in): National Pipe Straight Mechanical Fittings (NPSM). Used on my shower head.
