Wyniki wyszukiwania: raspbe

Sortowanie

7132 modeli

P
PrintablesSneaks

Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options

Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…

Wydruk około 4,15 €–5,07 € nettoWstępna wycena jednego wariantu

Pobrania
22 705
Polubienia
5392
Ocena
4,92
P
PrintablesMalolo

Malolo's screw-less / snap fit Raspberry Pi 4 Model B Case & Stands

Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…

Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu

Pobrania
12 788
Polubienia
2251
Ocena
4,96
P
PrintablesCarter

Raspberry Pi 4B Case (SnapTop) fits SenseHat

Fits Raspberry Pi 4 B and Hat (SenseHat) This Case also snaps to Domed Top from ... "Raspberry Pi4B Case for Noctua 40mm x 10mm Fan" Toggle and access for camera and GPIO and Toggle. Screws... Pi takes M2.5 (a set of 4 screws and nuts…

Wydruk około 4,16 €–5,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
3193
Polubienia
400
Ocena
4,88
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount

Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…

Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2107
Polubienia
685
Ocena
4,81
P
PrintablesTronnic

Raspberry Pi 3 Case for Pi & Buck Converter - Direct Prusa i3 MK3 attachment

I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…

Wydruk około 4,59 €–5,61 € nettoWstępna wycena jednego wariantu

Pobrania
1733
Polubienia
173
Ocena
4,96
P
PrintablesCarter

Raspberry Pi 3B+ Case (SnapTop) fits SenseHat

This Case fits a Raspberry Pi 3B and also fits a SenseHat Board and has a second cover for GPIO, Camera and Toggle access... Top vents mirror display grid. Case is designed for Screw down and will accommodate the board without screws.…

Wydruk około 1,12 €–1,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1447
Polubienia
106
Ocena
4,88
P

Raspberry Pi 5 Case (customisable)

This is a press-fit Pi 5 case, with customisable options for vents and ports, that also supports the optional active cooler. V1.1 has more tolerant clearances, less crush ribs and a slight taper to the longer pins. V1.2 has no specific…

Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu

Pobrania
1394
Polubienia
69
Ocena
5
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief

Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…

Wydruk około 1,17 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1179
Polubienia
287
Ocena
4,97
P
Printablesrockethorse

Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 for Octoprint and OctoDash Prusa for MK3s+

LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…

Wydruk około 6,22 €–7,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1054
Polubienia
372
Ocena
5
P
Printablesthe printed cow

Retro Raspberry Pi 5 Case (snap fit)

A retro case that's simple and functional. Designed for use with pi's active cooler. I was aiming for a retro, Art Deco vibe, and also tried to capture the classic look of an RTX or Radeon reference GPU. Print Instructions: Settings: ~38g…

Wydruk około 3,27 €–4,00 € nettoWstępna wycena jednego wariantu

Pobrania
1001
Polubienia
128
Ocena
4,89
P
PrintablesWDR

Raspberry Pi4 case for Prusa MK3

Put a Raspberry Pi4B on your Prusa Mk3S and have it align perfectly with the frame. Smallest form factor possible for a Pi4. Space for an optional Pimoroni Fan Shim. All peripheral ports accessible (not the Pi headers). Break away window…

Wydruk około 2,84 €–3,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
933
Polubienia
150
Ocena
4,84
P
PrintablesRojikku

Raspberry Pi Touch Display 2 Case

A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. Designed to use the M2.5 x 6mm screws included with the…

Wydruk około 5,70 €–6,97 € nettoWstępna wycena jednego wariantu

Pobrania
915
Polubienia
42
Ocena
4,5
P
Printablesdarken

Raspberry Pi4B Prusa Mini Case

A Raspberry Pi4B case that attaches to the rails so you can mount it behind the LCD.

Wydruk około 4,44 €–5,43 € nettoWstępna wycena jednego wariantu

Pobrania
632
Polubienia
107
Ocena
4,89
P
PrintablesChris D

LCD Cover for Raspberry PI4 w/ Hyperpixel Display

This is a remix of the LCD Covers for Raspberry PI4 w/ Hyperpixel display. After reading some reviews about the existing ones being too tight and possibly cracking the display, I designed this one so that RPI w/ Hyperpixel simply slips in…

Wydruk około 0,98 €–1,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
446
Polubienia
65
Ocena
4,83
P
PrintablesMouky

Raspberry Pi 4 NAS open frame with two 2.5" drives

This is a open frame chassis for Raspberry Pi 4 with 2x 2.5" HDDs/SSDs. You can mount drives with a height of 15 mm. The holes in the Raspberry have a diameter of 2,7mm. Therefore i drilled them to 3mm. BOM: 4x 20mm M3 screw (pi mount) 4x…

Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu

Pobrania
418
Polubienia
78
Ocena
5
P
PrintablesFreeviv

Prusa MINI Raspberry Pi Case for the Pi4 B

Remix of Joe's Pi Case design to fit a Raspberry Pi 4B. You can customize the design with the included files (.step and .f3d) Print instructions Best to print the parts separat. If you download the stl you need to flip Top.stl. If you are…

Wydruk około 2,16 €–2,65 € nettoWstępna wycena jednego wariantu

Pobrania
395
Polubienia
36
Ocena
5
P
PrintablesFalco

Raspberry Pi4

Prusament Galaxy Black. PETG 0.20. 15% Infill: (Gyroid). Nozzle 250c. Bed 90c. Support : None.

Wydruk około 4,39 €–5,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
288
Polubienia
41
Ocena
4,83
P
PrintablesSorp2005

Raspberry Pi 3B+ CAM Rover with arm

This is a remix of the Rover . I made the model so it can fit a raspberry pi 3b+, a raspicam model 3, a servo HAT and a dc Motordriver. This Model Provides all files needed. There are two python files, which need to be loaded to the…

Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu

Pobrania
277
Polubienia
67
Ocena
0
P
Printablesgimpelginster

Bird Watching Case for Raspberry Pi HQ Camera

MATERIAL Raspberry Pi 4b Raspberry HQ Camera C-mount lens. In my case a 100mm telephoto lens . Cooling housing for RPi 4b (total height below 24mm) Anker 2000PD or Anker 325 Powerbank USB-A to -C cable Threaded inserts for tripod mount. I…

Wydruk około 5,10 €–6,23 € nettoWstępna wycena jednego wariantu

Pobrania
239
Polubienia
56
Ocena
5
P
PrintablesDuke194

Raspberrpy Pi 3 Case - IKEA Enclosure

Hey guys, I designed this because my RaspberryPi3 got really hot in my enclosure, especially when printing materials that require high heat bed temperatures like ABS or ASA. Therefore, I placed the Pi outside the enclosure which gave me…

Wydruk około 4,36 €–5,33 € nettoWstępna wycena jednego wariantu

Pobrania
210
Polubienia
23
Ocena
4
P
Printablesninv

Raspberry Pi 3/4/5 Case Holder for IKEA SKÅDIS

IKEA SKÅDIS Hook for Raspberry Pi Cases 🚀 A quick, easy-to-print solution (under 30 minutes) for snapping Raspberry Pi 3/4 B+ or Raspberry Pi 5 cases onto an IKEA SKÅDIS board. ⚠ Important: Do not use the first vent to avoid damaging…

Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
201
Polubienia
41
Ocena
5
P
PrintablesSimone Giordano

Raspberry Pi Camera Module 3 bed mount for MK3S

Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…

Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
179
Polubienia
12
Ocena
3
P
PrintablesAndres L

PRUSA like - Raspberry PI 4 case with a 40x40 fan and bracket for MK3/S

PRUSA like - Raspberry PI 4 case with space for a 40x40 fan and a bracket to clamp the case to the frame of the PRUSA i3 MK3/S In mi case i used a 40x40x20 fan i had lying around (12V from embpaspt) connected to 5V for reduced noise, you…

Wydruk około 3,62 €–4,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
178
Polubienia
18
Ocena
4
P
PrintablesRoberto

MEGA BOX MK3/S+ EINSY-RASPBERRY PI4 E PI3 CON USCITA HDMI - OCTOPRINT

Dopo aver analizzato le varie soluzioni trovate, ho deciso di progettare un box, per la scheda Einsy e il Raspberry Pi4, di mia iniziativa. Questo non è un remix ma un mio progetto. Ho cercato di includere ciò che serve alla stampante,…

Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu

Pobrania
178
Polubienia
48
Ocena
5
P
PrintablesToWcH

Raspberry Pi5 Case (Exposed Cooler)

Raspberry Pi5 case with the cpu cooler fully exposed

Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu

Pobrania
177
Polubienia
15
Ocena
5
P
PrintablesHawkeye

Raspberry Pi4 enclosure in the classical Apple Macintosh SE style

This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…

Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu

Pobrania
144
Polubienia
55
Ocena
0
P
PrintablesSimon Jolmers

Raspberry Pi 4 B Case and sonoff 3.0 - Home Assistant

A remake of the Raspberry Pi 4 B Case - Home Assistant. One centimeter longer so it will fit the sonoff 3.0.

Wydruk około 4,64 €–5,67 € nettoWstępna wycena jednego wariantu

Pobrania
140
Polubienia
17
Ocena
4
P
PrintablesEric

Cover for OV5647 Webcam Articulating Raspberry Pi Camera Mount for Prusa

I used Sneaks “raspicamcover_lense.stl” and moved the hole from the bottom to the top and added a few bosses to hold the camera against the base.

Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
137
Polubienia
13
Ocena
4,67
P
Printableshuberjer

Cover Lens for ArduCam 8MP IMX219 Sensor 175deg Wide Angle M12 Lens Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.

Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
137
Polubienia
6
Ocena
0
P
Printableswhimmel

Raspberry Pi 5 Breadboard Case

Same as the original, but with some relief for the power button.

Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu

Pobrania
135
Polubienia
15
Ocena
0
P
Printableschoucroute6790

PiKVM Case Raspberry Pi Zero 2 + HDMI to CSI bridge

A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…

Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu

Pobrania
124
Polubienia
10
Ocena
0

Raspberry Pi Zero (2) W mount for Original Prusa i3 MK3S+

Introduction This mount might help you get more stable WiFi connection with Raspberry Pi Zero (2) W mounted in your i3 MK3S+ in case you're experiencing issues when using the Pi mounted by following the official, Prusa-published…

Wydruk około 2,05 €–2,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
117
Polubienia
30
Ocena
4,8
P
PrintablesFalco

Raspberry Pi4

Filament : Devil Design. Green Transparent. PETG 0.20mm. 20% Infill: Honeycomb. Nozzle 230c. Bed 70c. Support : None.

Wydruk około 4,48 €–5,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
115
Polubienia
14
Ocena
4,5
P
Printables3Z3D

Raspberry Pi 4B USB Splitter Case with 3 Holes (Blicube BliKVM)

Remixed USB Splitter Case (Blicube BliKVM) with 3 Holes to see all outputs / inputs Support me at: Buy Me A Coffee

Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu

Pobrania
110
Polubienia
9
Ocena
4,5

HSW - Articulating Raspberry Pi Camera mount

Easy to print middle man between HSW and Articulating RPi Camera mount system

Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
106
Polubienia
27
Ocena
5
P
PrintablesJiri Blazek

Raspberry Pi 4B Box (Noctua Fan variable)

Box for Raspbberry Pi 4B. You can use screws M2 8 mm. Fan is Noctua NF-A4x10 5V. Print instructions Material ASA.

Wydruk około 0,31 €–0,37 € nettoWstępna wycena jednego wariantu

Pobrania
105
Polubienia
8
Ocena
5
P
Printablescristi.a.lupu

Raspberry Pi AllSky camera

Case to build AllSky camera using UnderWaterDome…

Wydruk około 2,74 €–3,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
104
Polubienia
18
Ocena
5
P
Printablesblitz4u

Raspberry Raspiblitz Case V1.2 with changeable ventilation grid or fan mount

Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…

Wydruk około 4,92 €–6,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
103
Polubienia
12
Ocena
0
P
PrintablesXS3000

Raspberry pi NAS case

A raspberry pi case for NAS. This print has three components. The raspberry pi case, the harddrive case and the top cover. These parts are stackable so you can make server with one raspberry pi case and two or more harddisc cases The…

Wydruk około 4,63 €–5,66 € nettoWstępna wycena jednego wariantu

Pobrania
102
Polubienia
19
Ocena
0
P
Printablesfivesixzero

Case for Arducam UC-733 Raspberry PI HQ Cam USB Adapter Board

A simple case for the Arducam UC-733 board. The Fusion 360 source file is included to make remixes easier. Hardware Required This was designed around some basic hardware from McMaster Carr but their mesaurements are pretty standard and…

Wydruk około 1,37 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
99
Polubienia
12
Ocena
4
P
Printablesc22dragoon

Raspberry Pi Camera Mount for Mk3S+ Remix

Remix of the awesome Raspberry Cam v2 mount for MK3S(+). When printed for the MKS3+ the camera position was a too low. Thanks to @fuchsr for providing the step file, I was able to modify the mount a little to adjust the camera arm angle…

Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu

Pobrania
96
Polubienia
13
Ocena
5
P
PrintablesDubry

Camera and fan Module for Sneaks Snap together raspberry pi case

Printed in PETG with the default prusa settings.

Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
91
Polubienia
16
Ocena
5
P
PrintablesRoby

BIGTREETECH PITFT50 V1.0 + Raspberry PI 4 + low feet

I redesigned the LCD & Touchscreen front panels for my printer made at home and I modified them to be fitted on my Prusa MK3S also. The LCD & Touchscreen support will mount using the same screws of the original, but be aware that you need…

Wydruk około 2,04 €–2,50 € nettoWstępna wycena jednego wariantu

Pobrania
90
Polubienia
17
Ocena
0

RFID scanner/writer for PC/Mac - RaspberryPi Zero + RC522

RFID scanner/writer for PC/Mac - based on Raspberry Pi zero and RC522 RFID. A quality USB RFID code reader/writer costs over $220. This system costs less than $20. You will need: Raspberry Pi Zero (W) RFID-RC522 expansion module Pi Zero…

Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
84
Polubienia
15
Ocena
0
P
Printablesblitz4u

Raspberry Raspiblitz Case V1.0

Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…

Wydruk około 2,33 €–2,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
79
Polubienia
2
Ocena
0
P
Printableschristiangda

Raspberry PI - SATA SSD Joiner

This is a parametric design of a Raspberry PI 1 Model B+ SSD Joiner developed in Freecad, and the source code is here: https://github.com/christiangda/3d-printing-rpi-ssd-joiner I used this to configure my Octoprint configuration for my…

Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu

Pobrania
75
Polubienia
14
Ocena
0

Raspberry Pi + HiFiBerry XLR Streamer with 7" Touchscreen (Wall Mounted)

Items needed: Raspberry Pi 3 or 4 Raspberry Pi 7" Touchscreen HiFiBerry DAC2 Pro XLR Some plastic threading screws or you could add threaded inserts whatever you prefer. Easily adaptable for other DACs by modifying the connection box.…

Wydruk około 3,05 €–3,73 € nettoWstępna wycena jednego wariantu

Pobrania
68
Polubienia
4
Ocena
0
P
Printablesblitz4u

Raspberry Raspiblitz Case V1.1 with and without fan mount

Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…

Wydruk około 4,26 €–5,21 € nettoWstępna wycena jednego wariantu

Pobrania
66
Polubienia
9
Ocena
0
P
Printablescrokobacon

Nozzle view cam adjustable mount for Raspberry Pi Camera (Circular and Square)

UPDATE : just made a new version with other adjustments. Now the cam is a little more in a back position than before. _________________________________ Hi all, I couldn't find a proper Pi camera mount with a real nozzle view so i made one…

Wydruk około 1,14 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
66
Polubienia
17
Ocena
3
P
PrintablesWarg'Name

Raspberry Pi Case stand for Prusa MK4 (Pi 3b+) that works with LED Light Bar Prusa MK4

Hi, I remixed the stand done by tritschi because after installing the excellent led light bar for prusa mk4 , it was impossible to put the case where it originally stand. Also I wanted it to be near the logitech c310 camera stand by…

Wydruk około 2,85 €–3,48 € nettoWstępna wycena jednego wariantu

Pobrania
54
Polubienia
15
Ocena
5
P
PrintablesDukeCGN

Combinable Raspberry Pi 4 snapfit case - easy to add the Pi

I designed another RaspberryPi Case, because I was not happy with what I found. I designed this one to add the RaspberryPi easily without harming it. In many cases I found, I have to choose violence to bring it in. Here I designed the…

Wydruk około 2,38 €–2,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
54
Polubienia
6
Ocena
0
P
PrintablesBenBigBeard

Hinged Box for Raspberry Pi Pico Robotic Board (kitronik)

This is a Hinged Box for Raspberry Pi Pico Robotic Board made by kitronik I ma building my own animatronic and needed a solution to not only store my pico and board, but ensure its still usable I have put together a sturdy case with the…

Wydruk około 0,69 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
53
Polubienia
5
Ocena
0
P
PrintablesBeelsebob

Raspberry Pi HQ Camera Mount

A mount for the Raspberry Pi HQ Camera to sit inside the top of the frame looking down at the build plate. When combined with the 6mm wide angle lens, provides clear shots of the whole bed during a print. Bill of Materials 3 Printed Parts…

Wydruk około 1,75 €–2,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
53
Polubienia
24
Ocena
0
P
PrintablesBreh

Raspberry Pi + LoRaWAN stand (SenseCap M1)

I bought both the pi and lorawan card separately for a uni project but realised together they are a sensecap m1, so it could be used as an alternative case for that too. I needed to display them for the project fair at my university so i…

Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu

Pobrania
52
Polubienia
0
Ocena
0
P
Printablescdburgess

Raspberry Pi Zero Solder Helper

Soldering the pins to the raspberry pi zero can be challenging for a novice like myself. I designed this holder to help with this process. It helps with all of the following: Hold the pins in place, in the proper orientation, and in the…

Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
47
Polubienia
6
Ocena
5
P
PrintablesMarcus

Lid for Raspberry Pi Zero (W) case with 6 or all GPIO Pins accessible

Updated lids for the original case which allows to access the first 6 or all GPIO pins.

Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
46
Polubienia
2
Ocena
0
P
PrintablesPat_S

Raspberry Pi 3B+ case for the Prusa MK3S (Remix) / Raspberry Pi 3B+ Gehäuse für den Prusa MK3S (Remix)

Remix of the case by dktosoch. https://www.thingiverse.com/thing:2844013 The housing now fits on top of the Prusa MK3S and can be fixed with two M3x10 screws. Happy printing! If you like this thing leave a like or post a make. I'm always…

Wydruk około 4,55 €–5,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
45
Polubienia
2
Ocena
0
P
PrintablesoXiVanisher

Raspberry Pi Pico case with 3 buttons

A minimal case for a Raspberry Pi Pico with 3 buttons. This case is designed for this my circuit-pico-keyboard project. A minimal keyboard to choose OS from grub boot manager when no keyboard is connected.

Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu

Pobrania
37
Polubienia
4
Ocena
0
P
Printablesxanderthol

Raspberry Pi Zero Stack Plate

I made this plate to stack my Raspberry Pi zeros and zero 2s. The Raspberry Pi's can be screed down to the plate with four m2.5 screws, I used these…

Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu

Pobrania
37
Polubienia
2
Ocena
0
P
PrintablesDan Rogers

Attractive case for Eleclab 7" Rev C screen and Raspberry Pi

Here's a compact case that holds an Eleclab 7" touch screen Revision C. Since that screen is also a RPI add on, it also holds the raspberry Pi. The case and case back should be printed separately. Use snug supports to print the case, they…

Wydruk około 1,38 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
35
Polubienia
3
Ocena
0
P
Printableshosebei

Raspberry PI 5 + NVME Base + HifiBerry DAC2 Pro Case

I build a Volumio Player with the following items: Raspberry PI 5 pimoroni NVMe Base for Raspberry Pi 5 HiFiBerry DAC2 Pro (No Affiliate links whatsover) I could not find a suitable Case, that is why I created my own :) Not perfect, but…

Wydruk około 6,78 €–8,29 € nettoWstępna wycena jednego wariantu

Pobrania
33
Polubienia
5
Ocena
0
P
PrintablesTache

Prusa Mount for Squirrelbrain's Raspberry Pi Cases

This is a simple mount for a RaspberryPi. The case I made this for was designed by @Squirrelbrain , listed below. You can use is anywhere else you want a simple mount for those cases. I used 2 M3x10 screws with nuts to attache to the…

Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu

Pobrania
32
Polubienia
4
Ocena
5
P
PrintablesPetr Šlachta

Raspberry pi 4b case with SSD drive slot

Modification of original Malolo's screw-less Raspberry case - “Bottom_Base_SM” with additional slot for SSD drive's PCB ! Make sure to adjust the pillars spacing to fit the holes of your PCB ! Instructions: Pop open your SSD drive and…

Wydruk około 1,99 €–2,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesJagesh

Raspberry Pi 4/4B Mount for GeeekPi Case on MK3/MK3S/MK3S+

Uses 2 M3x8mm screws to mount to the frame. Print instructions: -Brim recommended -No supports -0.2mm layer height You can buy the case here: Case + Power supply: https://amzn.to/4f2fVIn Case only: https://amzn.to/40lDUOb Have included a…

Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
5
Ocena
0
P
PrintablesXTramp

Raspberry Pi 4B Mount for Prusa MK2/s MK3/S with MMU2 (Octopi/Octoprint)

Awesome idea of Laurent's Lab to modify Geekwork's aluminum case to mount on the Prusa frame. I mounted an MMU2 and the LED Light Bar Prusa i3 MK2/MK3 so I modified the case to get space for the cables and secure them with two cable ties.…

Wydruk około 3,27 €–4,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
27
Polubienia
1
Ocena
0
P
PrintablesOpenscaddad

Raspberry Pi Bracket for Dell 1908FPc Monitor

In the early 2000s, Dell made a series of monitors that had an optional sound bar powered by a 24w, 12v barrel jack. These monitors also functioned as a USB hub. Pictured is the back of a 1908FPc monitor and a 3D printed bracket that…

Wydruk około 2,20 €–2,68 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
4
Ocena
0
P
PrintablesNikosSprocket

Combined rail mount for Raspberry Pi 4 and BTT U2C CAN board

There are 2 versions available; Short and Long. Depends on the space available between the BTT U2C board and the printer's side panels. Also, included an easily printable spacers to include between the boards and the rail mount.

Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu

Pobrania
26
Polubienia
5
Ocena
0
P
PrintablesDukeCGN

Prusa Enclosure - Raspberry Pi 4 snapfit case

Closed this one, can be found here: https://www.printables.com/de/model/870348-combinable-raspberry-pi-4-snapfit-case-easy-to-add I designed another RaspberryPi Case that fits in the Prusa Enclosure (or any other M3 driven screw/insert),…

Wydruk około 1,36 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
26
Polubienia
4
Ocena
0
P
PrintablesKlaasYK

Raspberry - Antweight Battlebot

Winner of the first edition of Boeliebots in the Groninger Forum, this is Raspberry. A horizontal spinner Antweight Battlebot. Weighing in at only 140 grams, it's maneuverable and can deal quite some damage to it's opponents. Printing…

Wydruk około 3,47 €–4,24 € nettoWstępna wycena jednego wariantu

Pobrania
25
Polubienia
5
Ocena
0
P
PrintablesTRex22

Raspberry Pi Zero 2 (+ camera) case for Ender 2 Pro with Arducam support (EDITED)

Modified the arm to be longer. Will crash into the screen if in use. Moved to Klipper so don't need the screen anymore. Because I added a second cooling fan I could not see my prints anymore. Also modified the camera holder to support the…

Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu

Pobrania
25
Polubienia
4
Ocena
0
P
PrintablesScott Gibb

Prusa I3Mk3s+ Raspberry Pi 4 Case

Summary I found that my Raspberry Pi 4 was overheating when running Octoprint, so I decided to buy a heatsink to solve the problem. The one I bought is really good due to its massive case. However none of the existing cases for the Prusa…

Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu

Pobrania
22
Polubienia
2
Ocena
0
P
Printablesinvisiblefmx

SD Accessible Bottom for Modular Snap Together Case for Raspberry Pi 2B/3B/3B+

Alternate side mount bottom for Sneaks' modular raspi case. Provides easier access to SD card. Now fits RasPi 2B/3B/3B+

Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesCrami

Raspberry PI 4 Holder for Prusa Enclosure

A snap on holder for a full aluminum cooling case like this one: https://www.aliexpress.com/item/1005006112061018.html Prints without Support. Recommend 3 perimeters and 20% infill. Only needs two M3 Screws and nuts to mount to the…

Wydruk około 0,59 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesSebastian

Raspberry Pi 5 Case with Logo

Updated the Case with the RPi Logo. I encluded the project file from prusa slicer, as well as my bgcode sliced with four colors. 1: Case color 2: Black logo borders 3: Green leafs 4: Red parts. Everything sliced for my single extruder MK4…

Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu

Pobrania
20
Polubienia
1
Ocena
0
P
Printables3ric74

Ball Mount Raspberry Pi4 Kit Labists

J'avais besoin de fixer le boitier de ma Raspberry Pi4 dans la Prusa Enclosure. C'est un boitier de chez Labists qui a un insert de vis M6. J'avais déjà installé une rotule dans l'Enclosure : merci à InnesPort…

Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesMunich3DThinker

Raspberry Pi Radio Case

Parts needed Raspberry Pi 3B+ IQAudio DAC Pro Official RaspberryPi Touchscreen 7" (Version 1) Rotary encoder KY-040 (axle diameter: 6mm) 4x Hexagon socket head cap screws M2x5 mm 2x Heatset inserts M2x4x3.2 mm (for both sides of the inner…

Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesPetrusJPrinsloo

Case for Raspberry Pi 5 with 4.3inch HDMI LCD (B) 800x480

I got this screen that is super compact with the Pi and had fun designing a case for it. The idea was to do it with one part so it can easily just slide in and out. The screen was called the "4.3inch HDMI LCD (B) - 800x480 - IPS -…

Wydruk około 4,21 €–5,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesVorpal

Adapter from Raspberry Pi 5 case to NVME SSD hat

Adapter to mount Geekworm X1001 NVME SSD hat to the passively cooled Edatech ED-Pi5Case-B for the Raspberry Pi 5. The included standoffs with the X1001 won't fit, so this is an adapter. Print in PETG or another heat resistant material,…

Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
14
Polubienia
3
Ocena
0
P
PrintablesFab Lab Siegen

LoRaWAN with Raspberry Pi 3

The case offers space for a Raspberry Pi3 and a 80mm fan as well as a Dragino PG1301 LoRaWAN Concentrator.

Wydruk około 4,50 €–5,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesIcegianter

Cover for Raspberry Board

Dimensions: 105 mm x 100 mm x 46 mm Parts Included: Raspberry board cover Brand: Creality Printer: Ender 3 Filament: Overture PLA 1.75 mm Black Bed Temp: 60* C Nozzle Temp: 200* C Nozzle Type: .4 mm Infil: 10% Infil Type: Gyroid Supports:…

Wydruk około 9,10 €–11,12 € nettoWstępna wycena jednego wariantu

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesRoman Huante

Raspberry Pi and Adafruit Perma-Proto Board Case for Prusa i3MK3

Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: The main…

Wydruk około 9,25 €–11,31 € nettoWstępna wycena jednego wariantu

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesOlle W

Customizable Raspberry Pi 3 Mount Bracket for 3030 Extrusion

A simple mounting bracket to mount my Raspberry Pi to the 3030 extrusion of the E3D Tool Changer. The bracket is made to fit the Raspberry Pi case I had printed. It should be be a press fit. There are customizer options for some values if…

Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu

Pobrania
3
Polubienia
0
Ocena
0
P
Printableshjembaek

Raspberry Pi 5 Extension for the Mainframe z16 and z17 Modular Case

⚠ Requires the: Mainframe z17 Modular Case (Free) or Mainframe z16 Modular Case (Free) for full functionality 🔌 Raspberry Pi 5 Extension for the Mainframe z16 and z17 Modular Case This extension pack is designed to make the Mainframe…

Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu

Polubienia
7
Ocena
5
P
PrintablesSneaks

Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…

Pobrania
27 813
Polubienia
6270
Ocena
4,9
P
PrintablesStamos

Raspberry Pi 5 case

This case is for the Raspberry Pi 5. At the rear end you can easily use the power button and view the led indicator. At the bottom you can fit M2.5 nuts and use M2.5 bolts to secure the board. There is a version with air-vents in case you…

Pobrania
23 462
Polubienia
1686
Ocena
4,9
P
PrintablesStamos

Raspberry Pi 3/4 B+ Case

This is a case for Raspberry Pi 3B+/4*. You can choose between two covers with different patterns. The cover with the hexagonal pattern can be dual color, if you use the add color change feature, in PrusaSlicer . The covers are snap fit.…

Pobrania
22 231
Polubienia
1963
Ocena
4,89
P
PrintablesPrusa Research

Raspberry Pi Zero frame for Einsy Rambo

For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…

Pobrania
14 276
Polubienia
609
Ocena
4,89
P
Printablespyrho // 25.wf

Raspberry Pi 5 Case (snap fit)

This is a pretty tight fit and snaps in place nicely. The case was designed with the official active cooler in mind; there is an intake vent for the fan, exhaust vents at the back and some more vents above the radiator to help with heat…

Pobrania
13 532
Polubienia
1143
Ocena
4,9
P
PrintablesPyro_Industries

Raspberry Pi 4

Print or use to make new things

Pobrania
13 228
Polubienia
210
Ocena
5
P
PrintablesSquirrelbrain

Raspberry Pi 4 Case

NEW Updated version here: Raspberry Pi 4 Case U will need: Case - M2.5x10 self tapping screws X13 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 Here is a Accu…

Pobrania
9462
Polubienia
2259
Ocena
4,8
P
PrintablesPyro_Industries

Raspberry Pi 5

Print or use for making other models

Pobrania
9294
Polubienia
209
Ocena
5
P
PrintablesNikolica

Raspberry Pi Zero case/Zero W case/Zero 2 W case (2h print)

🛠 3D Printable Parts for 40x40 Extruded Aluminum Mount You can 3D print M5 nuts and bolts for use with 40x40 extruded aluminum using the models below: 🔩 M5 Drop-In T-Nut 📎 https://www.prusaprinters.org/prints/3246-m5-drop-in-t-nut 🔧 M5…

Pobrania
9101
Polubienia
604
Ocena
4,87
P
PrintablesMarius

Slim Raspberry Pi Zero W Case

24.05.2021 update: case was designed for the raspberry pi zero W, it will not fit the older raspberry pi zero (different SMD board layout). a remixed version that will fit the old pi zero and also adds cut outs for the pin header can be…

Pobrania
8755
Polubienia
1067
Ocena
4,85
P
PrintablesMalolo

Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case & Stands

There already is a plethora of raspberry pi cases on the internet and the last thing we need is yet another one ... well - I created one anyway ... because I wanted to and I had a lot of fun doing it :-). I tried to achieve the following…

Pobrania
8269
Polubienia
1209
Ocena
4,95
P
PrintablesMicro Center

Raspberry Pi 5 Case W/Power Button — V2

Raspberry Pi 5 Case Inland Filament Used: Raspberry Red PLA+ Raspberry Red PLA+ on Amazon Printer Settings: Nozzle Temp: 220° Bed Temp: 60° No Supports 15% Infill Print Time: 1 HR 15 Mins Speed: Standard Bambu Settings Measures 92mm x…

Pobrania
6880
Polubienia
282
Ocena
4,74
P
PrintablesJayCee09

RaspBerry Pi 4 case

A RaspBerry Pi 4 case designed to optimize the airflow around the board and to keep it well cooled without the need of a cooling fan. From the hestetical point of view, it is recommended White PLA, but it can be printed in any color you…

Pobrania
6544
Polubienia
184
Ocena
5
P

Appleberry G5 - Raspberry Pi 3B / 4B in Apple Power Mac G5 case

Appleberry G5 - Miniature Classic Cheese Grater I’ve always been a fan of the sleek, industrial look of the Apple Power Mac G5 and the Mac Pro 5.1—those aluminum beasts are just iconic! So, naturally, I’ve been dreaming about having a…

Pobrania
6341
Polubienia
2341
Ocena
4,88
P
PrintablesBasementCNC

Raspberry Pi 5

Its the best i could model it, diamensions based on the chips and parts built into the new 5, board based on the old 4

Pobrania
6166
Polubienia
73
Ocena
0
P
PrintablesHenry Levesque

Raspberry Pi Zero 2 W

A basic model of a Raspberry Pi Zero 2 W designed to be 3D printed or added to your CAD Model to confirm dimensions and placement of features. Amazon link to purchase a Raspberry Pi Zero 2 W once you have confirmed all of your dimensions.

Pobrania
5869
Polubienia
77
Ocena
5
P
PrintablesSquirrelbrain

Raspberry Pi 5 Case

U will need: Case - M2.5x10 self tapping screws X13 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 Here is a Accu Components link for all fixing listed above.…

Pobrania
5633
Polubienia
1347
Ocena
4,71