127 modeli
Remix of Prusa FaceShield RC3 redesigned for 0.6mm nozzle printing. The stl file contains stacked version with a gap of 0.4mm designed to be printed with layer height 0.4mm. Version with and without logo (slightly faster printing) is…
Wydruk około 30,56 €–37,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Replacement for the stock filament cover to allow the attachment of a bowden tube Print instructions Background: I wanted a reverse bowden system for my enclosure as I now mount the spool holder on the side. Works as well for the…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…
Note : In the pictures, the feet are on the top instead of the bottom, I fixed that in the model after realizing that they where feet and not just connecting pegs! Fusion 360 redesign of the Chipp Walters' drawer system design (just the…
This model was redesigned using FreeCAD. Added features: - higher front part holding the book open - cuts for better stability Can be printed quite well without supports with 3 perimeters of 0.3 layer height.
Slant 3D's youtube channel uploaded a video where they redesigned the golf tee to be more suitable for FDM 3D printing. They did not upload an STL for the golf tee, so this is my version inspired by their design. Features & Design…
PRINT-IN-PLACE HAR CLAW CLIP This is the perfect gift for your mum this Mother's Day, it's not a remix, it's a complete redesign from my previous hair clip. It works better and the smaller version prints great. FOR THE LARGE MODEL YOU…
This is a complete redesign of alec.form's Filament Spools for IKEA SKADIS. They are designed around Polymaker's 200mm diameter cardboard spools, but work fine with other ones. Those just fit the best. The main change is I increased width…
This is a bait station for insects, in other words, a container that houses insecticide or poison in a way that's attractive and accessible to insects, but less accessible to pets & other wildlife. I was prompted to design this station…
This is a redesign of @Bignozz's awesome Baby Yoda themed book stand. I redesigned the stand so that the books (or in my case the Blu-rays / Xbox games / DVDs) transfer the weight to the stand itself, so it no longer slides away. I also…
This is a refined tilt open support, with a strengthed and angled glass lip and designed to fit K1 Max Glass Lid Raiser
After finding another rope model and attempting to slice/print it I ran into a series of problems. A lot of the designs currently available were created in programs like blender. Although easier on your computer while designing, it leaves…
The original design fitted my LCR T4 but it was not perfect. You still need to print the bottom case from the original design. Print instructions This is the one I ordered https://s.click.aliexpress.com/e/_DlLbzqD different vendors have…
This is a redesign of my previous tape dispenser. I have created a middle hole on it to be able to hold the dispenser on your thumb. The idea came from the diver's finger spool (in case if you are a diver I have an other nice model for…
I have printed many types of these cardboard screws for makedo projects and my kids kept breaking them, maybe they are just rough on toys…. Either way, I redesigned them and made them much stronger, I like to print them with 100% infill,…
This is the Mafioso C00lkidd redesign turned into an action figure. (Minions will be soon, that way you get the whole set.)
I designed this set of eyeballs using Fusion 360 to give the Oculus headset a bit of style. I redesigned them to make clip stronger. Just print clip on its side separate from the eyeball and thread pieces together. Eyes can be rotated in…
This is completely inspired by uCkeN's modular hexagon plant trellis , but designed from scratch with some changes to the feet/connectors: Available in single, double, and triple corner varieties. Includes varieties that have a hole…
I did a rework of the container & lid. Mostly I reduced the thickness of the wall and reorientated the long holes (horizontally vs. vertically). Printed in Bambu ABS the print time is less than half, also the filament. In standard profile…
does not contain a holder for the glue stick and zip ties, that come with the printer, as I couldn't find a way to make them fit nicely.
I completely redesigned the crown. I don't know how, but the model was very strangely designed. Now it's a clean design.
Description The stock model cooling fan duct sucks. Here I have redesigned one. The main purpose is to add air flow guiders so the cooling air could be more even and stronger. To maintain the dimension is important so it would not cause…
Honda CR-V 46505-SA5-000 Stop Pedal Pad. Not much to say except the part breaks after a while and causes the stop lights to remain on until the battery is dead. People think they have a problem with their battery, and it's just this tiny…
The Precision Screwdriver Case by TimATX printed and fit together well, but my screwdrivers did not fit well. I printed it because my original case was cracked and would not stay closed. I redesigned the inserts, basing them on my set's…
Redesigned parts for Dummy 13
Added 9V battery compartment and some descriptive text on the front panel
Since i had issues with the available options, bending wedges or clips.. needing slm printed parts to use the higher tensions you can run with monolith... i decided to design my own clips fully printed that can take the higher tensions!…
This is a modification of the Maker Wallet by Agustin Arroyo , with some fixes that make it work much better in my opinion. This remix adds holes designed for small magnets. 4mm in diameter and ~1.8mm thickness. These magnets help lock…
For MJX Hyper Go H16H H16E H16P 16207 16208 16209 16210 rc car. Part Numbers: Front swing up 16210 Front swing down 16220 Rear swing up 16240 Rear swing down 16250 Most of the measurements are the same, a bit redesigned to be more beefy,…
These floating handles will mean you are less likely to lose them in the murky depths of your water bowl. I like using 20lb fishing line as it holds up quite well.
I redesigned bookmark, added draft to inner sides, so it is not squeezing paper. Let me know if it works. I will print it but need to do some maintenance on printer first.
Theese inserts are easier to insert and remove! Push a little on the tabs to insert.
This adds 2 news sizes. The original opening is 16 cm. This adds supports with 6 cm and 3 cm openings.
After I finished my Ercf v2 build I was immediately annoyed by the Cottentail buffer system, way too difficult to load and way too much drag. I modified the coupler blocks so they run in a straight line and kept other original features…
Shaka's Acorn Container has inspired me to design my own version. This acorn container is larger, easier to print. It has normal thread instead of reversed thread. Fuzzy skin setting is recommended for the top part: outside walls only,…
Edited to add: Markury just posted an edited version of his remix, so you may not need this! But it's here in case you want to try it anyway. :) -------- If you make Markury's Naked Iris Compass version, you may find that it is difficult…
used for pullstruder for controlling speed of the stepper based on diameter, it's pretty accurate down to like ~0.05mm, uses 4x 625 bearings, and LINEAR SS495A hall effect sensor.
This 3D model is an accurate redesign of the original Toyota forklift cup holder. If your forklift cup holder is lost or broken, this model serves as a perfect replacement, offering the same functionality and quality as the original part.…
Based on the Standalone Touch ID Module by SnazzyLabs , this new version of a Standalone Touch ID Module provides a multitude of improvements. TODO: Add more pictures of assembly Add clear instructions around battery connection and…
The same function as the design 'Prusa Core One / + / L - Advanced Filtration v2' by Favon The new version (V2) has larger valves and fits on the CORE One, Core One+ and CORE One L and M3 inserts are optional. Version 2a has a more stable…
Redesigned straight line ERCF v2 coupler block and electronics bay to fit new mounting holes/heights
I designed the base part as two separate prints to be glued together. I suggest printing the enclosure adapter first and checking if it fits the printer. The filter enclosure should be printed on the flat back wall and with some support…
This is a redesign of the blue Wasp extruder for clay. The original is prone to breaking, and manufacturer does not sell it as a separate piece. I redesigned it to be more robust. You can print it on any FDM printer from PET-G or PLA they…
This model is exactly like the original, aside from the fact that the slot where the X motor wire goes has been extended to prevent it from slipping off. You will need to modify this to have an actual slot for the camera, since this is…
I redesigned the pickguard to make it a little more durable. It is recessed for all electronics and screws. It is a little thicker for durability, and you can even do a color change to make it pop! Works perfectly on pruscaster.
The original file has no flat sides and unnecessary text on the inside, which would make it harder to support.
This is a clip for the HEX Ring Fan Duct created by takman29 and remixed by kroffty . The original clip is much simpler and does the job, but it's not the most aesthetically pleasing thing to look at. I need it to look like it fits…
I'm publishing this without first testing it, so be warned. Feel free to tweak the model at all.
Connectors for adding more stability to the spool holders
I redesigned the Black Panther Chain for the cults3d Cosplay contest. The model is easy to print if you do exactly what I recommend! It would be amazing if you post your makes with my models! Furthermore it would be better if you print…
This design is based on the concept and dimensions from #216223. The original model had 10 digits and 25 detent positions. That made it impossible for the digits to consistently align with the window. I had posted a hybrid STL+SCAD repair…
Some of you asked if I could make the head of my T-Rex rotate, so I decided to go back and redesign my original model! The head can now rotate, and I also redesigned the arms so they can simply be clipped into place with a little…
The original remix Naked Iris Compass by Markury was very difficult to turn, though otherwise very cool! Markury just posted his own edit to fix that problem while I was printing this one, so if you like, you can just use his instead.…
5 darts can't fit all the way back because of the recessed lip of silly shells, so they have to be seated forward. Since they're seated about a cm forward, the back of the shell can be used to redistribute the air to each dart and build a…
This remix is modeled from scratch based on the design by alavanimation. I wasn't satisfied with the original model quality and the sub-optimal printability. Thus this model is split into separate parts in order to print with minimal…
I wasn't quiet satisfied with using M8 screws for the z-axis, so I altered the mount to accept an TR8 leadscrew. I also changed the design of the belt tensioner mounted to the x carriage. Print instructions Category: 3D Printer Extruders…
Compatible with Prusa MK3. This part is designed to fit the standard brass insert that comes with the Enclosure Kit , which unfortunately does not fit the MK3 out of the box. Therefore you'll need to harvest the insert from the original…
// PLEASE PRINT WITH 0.2 QUALITY OR FINER. // (I printed mine out at 0.2 quality, no supports or rafts). This is the first remix I've ever done I am not very experienced with remixing and other types of things relating but I decided to…
Warning dovetail can break if slammed open. I quickly draw two patches to fix mine. I will update the full assembly with: increased area on junction different shape of junction (more open angle) As the original bracket had different…
Sunlu 2024 reusable Spool weight holder that twists together Welcome back to my redesign for the new Sunlu spool. Check out my other designs. Find the popular spool weight to fit the new spools. Any feedback welcome. Why not give me a…
With this vacuum schroud you can finnaly go around the material when it is placed on the table. The original design from festool is to high and will not work, not even with 40mm material… So i designed a new (in my opinion better)…
Dear All, my tangent redesign for an easier printing of both hurdy gurdy tangents. You will need to print those layed on the longest face. This allows a stronger edge design with no break along the printing orientation. You will however…
Instructions work in progress..
For other Prusa MMU stuff: https://www.thingiverse.com/AbeFM/collections/abes-mmu2-stuff The idler drum on the MMU2 uses two screws going through two square nuts to fix it to the motor's shaft. In the instructions, they mention being…
Description Sunlu 2024 reusable Spool weight holder that twists together Welcome back to my redesign for the new Sunlu spool. Check out my other designs. Find the popular spool weight to fit the new spools. Any feedback welcome. Why not…
Redesigned build plate holder + tool drawer Can place printing board and printer tools No support required Added wider drawers
I took an idea for a fishing reel hanger and totally redesigned it from scratch in Fusion 360. I am including the Fusion file along with the STL file.
found the original on instructables but was not strong enougth so i strengthened it,,,,alot use brim and touching buildplate for the prop guard file as its nearly but not quite flat but still worth printing. for the prop guard (1) file,…
Uses a single Leonardo Pro Micro (Arduino) board for control, and a Single 2k Potentiometer. (5 and 10k should also work but code will need more adjustment)…
Irobri's P3Steel v2.01 redesigned by Paciente8159 (v2.2) This a redesign of irobri's near perfect P3Steel 3mm steel laser cut v2.01 3D printer I actually have one ( and I love it ) an these changes reflect some of the things I would like…
Hip Hop Hollow Knight redesigned with a Peaky Blinders-inspired gangster outfit for a stylish cinematic 3D-print collectible.
The dirtbin by LazyOdin fits perfect in my VR100 robot but looks a bit strange. That's why I added a lid to cover the whole bin bay. Like the source by LazyOdin it also uses the roomba 880/900 dirt bin filter. Edit: After four months of…
I wanted to eliminate the problem of the square drive snapping off, so I joined the drive dog with the gear. I had to split the housing to allow the drive dogs to be inserted.
mounts the same, works the same as the original handle. I added personalization to the handle for myself.
Redesigned gem poker chip tray for @tjdesign 's Splendor Box v3 with wider supports on the chip holders on the ends of the tray. The original design by @tjdesign is fantastic, but I modified it a bit after breaking one of the thin curved…
Description: Technically not a remix because all parts are completely designed by me, but very heavily inspired by the original design. I printed the original design at 50% scale, but was having issues with the pull chord teeth and hollow…
I've had a Lego Wreath for many years and it was just the same as everyone else's. BUT this year we have something new, assembles like a lego, a firm press fit, but looks more organic and complete. Make it many colors or use a clean green…
When I holster my Harbor Freight heat gun, the metal tip(which gets pretty darn hot) would hit the peg board and pull the bottom peg out a bit too. So I redesigned the bracket for a little more clearance. In the side by side picture,…
Based on the model by Shash614 Model has been redesigned for better printability
This is a modification of the magnetic handles and base for Dominik Císař's Prusa enclosure ( https://www.thingiverse.com/thing:2864118 ). I tweaked the design to use some 1/2" x 1/16" disc magnets that are readily available in the U.S…
** New to 3d modeling. This is the first model I'm sharing publicly. CONSTRUCTIVE CRITICISM WELCOME :) ** Maybe I'm unlucky or too rough during the build process, but i broke at least 3 of these guys and the pole coming off the lower leg…
TwixT boardgame that remixes an existing board design, scaling it down to 50% in the x,y directions for a more portable size that is also quicker to print - but only scaling to 80% in the z-direction to still keep it reasonably rigid.…
Just made a simple nameplate for the spoolholders.
Greatly enjoyed the Revo nozzle rugged case by S2 Engineering and the remix by Beradino, but wanted to improve some of the ergonomics on the nozzle slotting and removal as well as change the text to be horizontal like on the original revo…
Another remix of the inset for the "Precision screwdriver case" by TimATX
This riser is the best one I found for the AD5X but the undersized drawers were a drawback. I resized them to fit much better. The side drawers did need to be shortened in length a little to account for the wider front drawer and internal…
this print has been changed to add separate clamps for the linear rods, and other slight modifications to allow easier use: a through hole for the lead screw, mounting holes for possible dust shoe, and wider sections around the bearing…
I made a redesign to better fit the bottom cover, the sensors and the side grille for ventilation. Functionality remains the same as the original design. Original Version: https://www.thingiverse.com/thing:4410332 Print Settings Printer…
File link to download : https://makeitreal.ankermake.com/models/12b7d0b2ed6811eeada97e51aeae0e08/Redesigned%20filament%20scraper.%20Works%20way%20better,%20good%20quality./?ref=home
I broke my elevon crossbars. Decided I needed something much stronger that will not be able to break. I designed these to be machined in 7075 ALU. Keep in mind two of the risers are printed. I used 72D TPU. Designed to work with VOW's GT…
felt that the trigger guard and mag release were not comfortable, and didn't like the plain lettering, so I decided to edit the existing models. 2nd - 4th images: original pieces are on the left (secondary) Trigger guard 2nd image:…
Redesigned base with weights and fan mount with holes
Stronger hinges - they use a M3 x 16mm screw instead of the dimple arrangement of the original. The screw threads into the box base, allowing the lid to swing freely. The screws are threaded through the box base first, then into the lid…
Added the option to mount a second 40mm fan for the heated bed driver Category: 3D Printer Parts
I removed some material from the clip area , added wedges to the sides for easier removing. Two sizes based on preferenc
Hexagonal filament guide with clip for MK4(S) printer. Clip based on Matt Boyers design. Rebuilt from the ground up in Solidworks, this clip is designed to work with the stock spool holders for the mk4s, the clip is based off of Matt…
Goes with this file: https://www.thingiverse.com/thing:603334 Loved the original file, but I wanted a switch to turn the lamp on and off. The redesigned base adds a 20mm hole for the switch along with a channel for the wires to meet up.…
![[Redesigned] Filament Spools for IKEA SKADIS - Fits Cardboard Spools](https://media.printables.com/media/prints/851177/images/6547896_d384e0a4-7db2-4294-9308-27fcbbd5fb62_11bdf147-e644-4888-b1c1-945949c6bb3f/pxl_20240420_194646446mp.jpg)
![Bambu Lab AMS - Silica Gel Box with Hygrometer [redesigned]](https://media.printables.com/media/prints/567197/images/4541612_dc2f9a37-91f1-43e6-9c01-799d873808d8/pxl_20230829_145809466.jpg)
![K1 Max tilt open lid support redesigned to fit K1 Max Glass Lid Raiser (with Sliding Vents) [ADDED: sizes]](https://media.printables.com/media/prints/1002651/images/7629517_62fb3ee1-aec1-44bd-98f7-2312b4310ede_ba387ca4-9b99-43b6-bae3-25b68141b96b/20240910_101301.jpg)
![Connector bolts for [Redesigned] Filament Spools for IKEA SKADIS - Fits Cardboard Spools](https://media.printables.com/media/prints/1f791546-d12c-457f-9566-cd919cd70e4b/images/10510783_f2d440c9-cf0c-46bd-8365-99034807d40a_fb0c90eb-051a-4727-8c92-820b499d1276/pxl_20250822_213915690.jpg)
![Nameplates for [Redesigned] Filament Spools for IKEA SKADIS - Fits Cardboard Spools](https://media.printables.com/media/prints/1196179/images/8987303_724827a1-d658-4433-ab1d-9ecad174034e_10a782d3-6130-4e6e-8d82-1b384eed11f0/20250217_191024.jpg)
