871 modeli
This is an attachment for the original Prusa Mini spool holder which allows adding a PC4 M10 quick release adapter for a common PTFE tube. Primarily I use this for a reverse bowden setup on my MK3. Printing: any solid filament 0.2mm layer…
This model is a adaptor for fit a PC4 M6 coupler. Print take 12m in 0.15 layer height on a MK4. You can print this without support, I recommend PETG to print it.
Modelo más corto y con corte, para evitar choques con el extrusor a partir de Z 180. Altura 8,5 y 7 cms – Reverse Bowden Short Connector, for Prusa MK3s frame`s and Ikea Platsa furniture. Large and short versión
The original model had the PTFE tube feed directly into the print, which works fine, but I wanted one that supported PTFE couplers. I have not tested it yet, but I modelled them so they should fit. There is a version for the M10 coupler…
Modified the Bear Upgrade 2.1 optional reverse bowden to fit the original M5 fitting (PC4-M5) used by Prusa for the MMU2 cover. The vslot mount is available in two versions: angled or normal. I bought the fittings here:…
My spin on a larger reversed Einsy case that's truer to the original Prusa MK3 Einsy Base design. I did get a lot of inspiration from Martin Au's Embiggend case, in fact I was using it up until recently. I also have a drop-in t-nut model…
Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…
Replace the toolhead cable clip with one with M10/M6 thread to fit a reverse bowden system. M10 racor is highly recomended! M6 racor is not recomended because it ads too much drag on the system so the filament do not run smooth. PTFE tube…
Wanted to free the reverse Bowden PTFE tube on my Creality K1 printer.
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== I saw the model from xoid but the zipper I needed…
In this type of gearbox, all the gears of the main shaft are in constant mesh with the corresponding gears of the countershaft. Two sliding dog clutches are provided on the main shaft. Gear ratios: 1.38, 1.00, 0.78, reverse 1.86 and…
This is a new extension for Gravitrax, well I haven't seen it so far although its quite simple. Needed: - Neodym Supermagnet ⌀ 10 x 5 mm - ⌀ 3 mm Pin ( a toothpick will work as well ) Just put the parts together like in the Video (I have…
Micro Reverse Compound Crossbow Really fun for shooting on a magnetic dart plate. The parts are printed in PLA and PETG at 0.2mm layer height. Additional Hardware: 2 mm wire (I used a 2mm stainless steel tig welding rod) magnet D:6mm…
Technically not a remix, but the concept is similar enough to VoltexRB's work that I've nominated it as such. Basically works the same as their version, but has a slightly better fit and deeper grooves to make it harder to come loose.
Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…
These brackets allow you to use a reverse Bowden tube to stop the filament from pulling on the extruder and giving inconsistent extrusion. This increased print quality significantly for me. Designed to be used with either my Neptune 4…
holder for a reverse-bowden fitting for the creality sprite extruder. with this holder the filament roll can be placed sideways or in a dryer. petg → 250/70 celsius → 0.12mm layer
Ender 3 V3 SE - Z axis reverse Bowden mount used in combination with https://www.printables.com/model/602032-ender-3-v3-se-ender-3-se-reverse-bowden-adapter and a spool holder to move the spool from the top of the printer to the right…
This print allows the use of a Bowden tube direct to the extruder when printing hygroscopic filaments. The top is threaded to accept a PC4 M10 fitting (which is actually a 1/8 BSP thread). This fitting has a larger hole inside, so it…
I made this modification to be able to easily remove the PTFE tube for filament change and cleaning (cold pull). Important note: PTFE tube should be snug fitted in the hole, yet easy to remove. Models have a 4,3 mm diamater hole which is…
Printed in PETG 0.2 layer height 4 walls 30% infill Supports - on build plate only
Turn your everyday card into the ultimate reverse card 😄 This two-piece credit card case is designed to fit a standard bank/ID card while keeping the iconic reverse-card look front and center. The raised border, oval, arrows, and corner…
The Prusa MK4's extruder filament inlet has a threaded M5 hole for which Prusa provides a Festo QSM-M5 fitting to use with MMU3. This model replaces the QSM-M5 in a reverse bowden system for the MK4. The adapter is designed to take a…
Simplistic reverse Bowden with an integrated cleaner (sponge) space on top of the extruder. Print instructions Category: 3D Printer Parts Print Settings Printer: Prusa MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15%…
HI ! I added a reverse option. I havent printed yet, just sharing it. I hope you like it! You will have to add an extra hole for the lifting rod, and will need an extra servo too. After I printed it, I can find the exact position for the…
Update 13.04.2023 -Added left side version with correct thread. Reverse bowden set for Prusa i3 MK3S(+). Includes modified OEM Prusa i3 MK3S+ top right z-mount and fs-cover with additional mounting points for PC4-M10 quick fitting…
This has now been tested. :D This is a beefed up Einsy case for the Prusa Mk3. It includes: • Frame brace. • Reversed Einsy for easy access • Space for cables so they don't squish all over the board. • Improved cable access ports • A port…
This upgrades the Creality Sprite Pro extruder to a reverse bowden setup. I have only tested this on an Ender 3 V2, so please feel free to remix according to your setup. Note that one of the parts listed is an M10-0.75 x 5mm heat set…
Makes use of a voron style spool holder (Which are super awesome) and attaches to 2020 extrusion. Has an integrated opening for a reverse bowden tube that sits close to the spool, so no overt unwinding. It works really well. The spool…
A cover for this generic backup camera so it doesn't look as dangly. Affix with double sided tape. The back of this cover is open so it can be installed after the camera. Category: Camera
it reduces shaking of the spool while printing fast infill mounts to the top horizontal extrusion i recommend printing it using 3 walls as it may creep over time requires: 1x m3x10 screw 1x m3 tnut 1x appropriate length bowden tube (for…
This is the standing version of the spool holder, I have already uploaded a hanging version , some parts are the same as the other spool holder so you can reuse them if you change your setup. Introduction: After some experience with my…
Print with 3 walls and 18% gyroid infill. Requires: 2x M6x12 2x M6 3030 T-Nut 1x PC4-01
Edit: the original model has updated to 3.1 which now includes a similar rubber band option, therefore just use the original no need to use this remix, unless it did not work well for you. (e.g. you have a longer rubber band) This version…
A case for the Adafruit ESP32-S2 Reverse TFT Feather. Uses four to six m2x10 screws. https://www.adafruit.com/product/5345 Also included a battery case. https://www.adafruit.com/product/3898 I've updated both back plates to have better…
This models allows you to mount a PC4‑M10 PTFE coupler above your Sherpa Mini (which is a bit loose normally) which fixes the bowden tube in place above your extruder. The PC4‑M10 coupler must be M10x1 threaded to match the threads in the…
You can give it to your friend and tell them to tighten it, but when they start turning it right, it will just fall off of the screw.
Differences against original: parts are less robust (as I dont think some parts must be that thick, it holds only headphones..) so I have made some parts thinner (with the same overall dimensions) as a result also desk can be thicker to…
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
These small tops are very light so they can be launched at high speed. They are easy to print, no support, no glue, no screw . You just need to clip the central axis up to the end and it's ready to spin (hold by the center when clipping…
UBBI adapter to enable reverse bowden capability on stock neptune 4 shroud Features: - Thickened to add more rigidity - Twist locking mechanism with audible snap - Prevents filament tugging and uneven extrusion 🤩 Do you like the design?…
Headphone holder like the source model, but with a large enough mount to fit on thicker desks. Made to fit on a butcher-block counter slab standing desk conversion.
This is the hanging version of the spool holder, I have now also uploaded a standing version , some parts are the same as the other spool holder so you can reuse them if you change your setup. Introduction: After some experience with my…
Drip bracket remixed to make it a bit more ergonomic to use
PLEASE NOTE THIS MODEL MAY REQUIRE SIZE MODIFICATIONS TO FIT YOUR HEAD PROPERLY I have only printed this once and have modified it since then so any feedback would be great Recommend to have: Copper Spray Paint (optional) Foam for head…
All parts were printed with PETG with a resolution of 0.28mm and with supports. In addition to the printed parts, you will need 4 screws identical to those in the photo plus 3 BX2091C terminals…
STL model units are mm
This is designed to bolt onto the underside of any existing bike computer that utilizes a quarter turn mount. The slots should allow fitting to most common bike mounts and works on my wahoo, black inc, and madone bar mounts, as well as…
Shortened the mount. Print as usual. No issues. Trying to keep the footprint of the printer as small as possible especially since it will be going into a DIY enclosure soon.
I decided to make a simple remix of the original Ulvheim A1 building base to complement PhysUdo's Ulvheim Building Demonic Ritual (upper floor): https://www.thingiverse.com/thing:3321919 I wanted to make the building with the pentagram…
This is a remix of Wardy89's MK3S filament guide on Thingiverse ( https://www.thingiverse.com/thing:3425397 ) This is designed to fit the Bondtech BMG upgrade for the MK3S and the MK2.5S with either the V6 or Slice Mosquito Hot ends. The…
Bmw reverse (rds\non-rds\bavaria\business) audio device side covers. OEM-number: 65 12 6 907 823 This device can be used on Bmw E30\E32\E34\E36. Reproduced with the example of original part. Perfectly fits and holds on its original place.…
This angled adapter allows for a very clean connection of a reverse bowden filament feeder to your MK3S printer (such as from a dry box). The adapter allows mounting two PC4-M10 fittings (M10x0.9 thread), to connect the extruder end to…
Same model as Avise's model "Galaxy Watch 5 Charging Stand, just mirrored so the cable faces the right side.
Introducing the Ultimate Reverse Camera Mount for Jeep Wrangler JKU! Tired of struggling with blind spots when reversing your Jeep Wrangler JKU? Look no further than this innovative, 3D-printed reverse camera mount, designed specifically…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to design more…
Because I loved the design from my old MK3s Stock Frame Reverse Bowden Feeder, I redesigned it to fit the 2020 Extrusions of the bear frame. It should fit every 2020 Extrusion - so not only helpful for the Bear-Frame.
If you like this project, take a moment to buy me a virtual coffee … If you are interested in other content like this, contact us in chat. Follow us and contact us for other requests:
Make sure and share your makes and if you like it please give it a ❤ LIKE! I came across @Remrafs “Funnel for Bambu AMS Dry Box” and it was amazing! However, I wanted to be able to pour the Silica Gel back into a bottle for storage or to…
Modified @MadeWithLayers ' design to fit the MK4(S). It screws into the Nextruder and fits your typical 4 mm PTFE tube. By the nature of reverse bowden, it is not necessary to use a quick connector, the tube will get pulled in by the…
This is a remix of a design by MidnightTinker. If they're on here and I'm not linking I apologize. This is meant to be worn on your belt to hold a keychain but it could be used for other utilities. The original design was an S shape, I…
This is a reverse alignment tool for Co2 laser machines from Omtech. I upload this upon request, but I really encourage that if you can afford to, that you purchase the “real” tool from American Photonics, it even comes calibrated! Please…
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== 3D printable replacement parts for a reverse bale…
After the Prusa Mini needs the filament from the bottom, I redesigned my already used Bowden Feeder from my MK3s. Changed the angle for 45°, so it's not feeding upperwards. Added M6 / M10 Versions ; with "easy to print versions". Original…
This stand looks awesome, but the way the cables hanged in the side of my monitor made my eyes twitch. At first I thought I could just mirror the model but I had to cut the hole for the reset button, I did my best with my limited Blender…
Simple Replacement for the stock filament cover to allow the attachment of a bowden tube Print instructions Background: I wanted a reverse bowden system for my enclosure as I now mount the spool holder on the side. Works as well for the…
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. although this is an injection molded part, but apparently it is absolutely printable
Filament Sensor Cover for the Prusa i3 MK3S which is adapted to accept a 'reverse bowden tube' to a filament dry box. You have to press fit a small piece of 6mm Festo tube in, see photo. The Festo tube has a inner diameter of 4mm. After…
Shorter Mounting Design This custom mount allows you to securely install an HP EliteDesk 800 G Mini PC within your 10-inch server rack. The remixed design provides additional support by assisting the PC from the back of the rack, reducing…
Reverse Tweezer Tip replacement. Won't be as strong as the original, and you will need to thread the plastic with the screw. Worked well with PLA - it does have a bit of flex, but if it breaks it's five minutes to print another. Printed…
Simple model of reverse bowden bottom support for 4mm PTFE tube. Build instructions : I build it from PETG-PTFE 10% - becouse I have it and it is black so it fits to sprite extruder well. I build standing as will be used on extruder and…
Printed in SUNLU PLA+ on the centauri carbon. Default settings with 3 walls and 20% grid infill.
Remix of Alex Ward's MK3S+'s reverse bowden cover. I did not realize at first that the center post was not the same diameter as PTFE tubing, and was preventing me from threading my PC4-M10 fitting. I removed the center post similar to…
Same as the original, just reversed with the big hole towards the shifter.
This is a filament run-out sensor designed to be inserted on a reverse bowden setup (on the feed-in tube to the extruder). I designed it for my Muldex 3D printer. Details about the printer: https://github.com/3dprintingworld/MULDEX Edit:…
This 3D-Model is as close as possible which I got down to with my callipers. I hate inaccurate measurements, so here was no guessing or big round up involved. Warning: Have in mind that the XL you will receive might have some changes to…
3D Print your Macro Photography In Brief This adaptor allows you to take macro photographs with Canon EF or EFS lenses. It was designed with kit zooms in mind. All examples use a kit 18-55mm kit zoom. Heavier lenses may need support. The…
didnt like the current offerings here so modeled up this version based on the factory Extruder Cover. This adapts a PC4-M10 thread push connect 4mm fitting to the infeed of the MK3S+ extruder for reverse bowden setups. Pair it with any of…
HUGE PROPS to WillsWorld for the original design. I just made a few easy mods to adapt this part for the newer shifters with reverse lockout. UPDATE: The model has been printed & test fit. Like a freakin' glove. #caliperlove Inserting the…
I had been using the standard reverse bowden on my Prusa Bear for a long time but the filament had to make a sharp turn from the roll into the tube for my setup. This caused issues for carbon fiber filled materials as they tend to be more…
The Dodecahedron Reverse Engineering Marker can also be used for 3D scanning applications. By placing the marker around the object to be scanned and using a 3D scanner to capture data through the holes in the marker, the resulting 3D scan…
Work in progress of the Reverse mounted gantry for Bondtech Indx and Voron V2/Micron2020 recommended to use BFI front idlers if you use this setup you need to replace the rear extrusion with a piece of 1515 BOM In addition to stock v2…
The Reverse Bowden Adapter is an accessory for the Prusa MK4 3D printer. This adapter aims to optimize filament feeding and reduce strain on the X-axis, particularly from larger filament spools. While the Prusa MK4 is equipped with a…
Put your headset on this nice desk clamp - very easy to print!
Reverse bowden setup for the Anycubic Kobra. In the picture, I used PC4-M10 fittings, 4mm tubing and 1.75mm filament. The threads are not vertically centered so this can be printed without supports, but means that it can get in the way of…
A simple ‘reverse’ mount designed to work with the official Everything Presence One case. Allows for an alternative mounting method - i.e. being stuck on the back of things such as monitors (the reason I designed it), bookshelves, kitchen…
Reverse Bowden Mount for use with PC4-M6 connector.
Turn screws that are hard / impossible to reach with a regular screwdriver I need to fix some screws at the back of my car charger but when attached to the wall it leaves me only a couple centimeters of clearance, so impossible to get…
Remixed from here. Rethreaded (just finger tighten and snug with wrench) Slightly thicker walls Top collar adds aesthetic and creates a depth stop to help prevent overtightening Original summary from @Dash: Low mass. Close to the…
Requirements: You will need two 25mm M4 screws for installation. I bought the Bowden parts on Amazon as a kit: https://www.amazon.com/gp/product/B0CMQN1681/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 This remix of the Elegoo Neptune 4…
The right z-axis top piece with a mount for a reverse bowden. Moving the filament spool off the z plate did wonders for my prints. Using the Prusa Mini spool holder for flawless unwinding. Uses 6mm bowden coupler and 60mm of bowden tube.…
Thanks for sharing from the author Follow me for other drawings that may be useful to you. Happy Printing
This is a remix, thanks for the original ( https://www.thingiverse.com/thing:3121052 by lab27). I was pleased with the camera mount, but not with the viewing angle. So my only contribution to the project is the reversed camera mounting,…
The original Bear reverse bowden arm is 46mm and this one I made is 80mm. I find it reaches to the center of the spool vs just the leading edge.
This is a reverse or retro adapter to mount a normal lens in reverse position for macro photography. The adapter mounts to a nikon f bayonet mount on the camera side and a 52mm filter thread on the lens. Printed on an elegoo mars resin…
I recently “upgraded” my Ender 3 v2 hotend to a Micro Swiss NG, a direct drive extruder. I also am running a reverse bowden setup, where i have a Capricorn bowden tube run from the Micro Swiss NG all the way back to a Sunlu Filament…
This model allows you to reverse mount a fiber coupler, in a keystone holder. I needed this model since I had a coupler with a shutter to cover the laser that faced the wrong direction. That why I removed some material in front and pushed…
BTT EBB 36 Mount for Sherpa Mini to mount on the opposite side of the motor. This was originally designed for The Diamond Mount but could be used on any hotend mount. Includes top plate for diamond mount to route cables to the back of the…
UPDATE 6/19/24: Bowden tube now only inserts to the depth of the PC4 - then stops and can't slide in too far. Curvature of the channel was lessened - no more binding. Filament aligns with the bowden tube and slides in easily without…
