8330 modeli
Thanks Hello! I needed to make a few holes around the house to make some installations and dust was an issue. Decided to design my own guide and dust collector to make it look the way I wanted. It doesn't need supports! =) Hi again! I…
Wydruk około 2,77 €–3,38 € nettoWstępna wycena jednego wariantu
For IMPERIAL: https://www.printables.com/model/1371922-drill-guide-imperial This metric drill guide is the perfect helper for accurate drilling with bit sizes ranging from 4 mm to 10 mm . The guide is designed as a sturdy bar with clearly…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Jigs for sharpening Drill Bits up to 10mm with a Dremel and a Cuttingdisk for a grinding Angle of 118° (standard) and 135° drillbits. Credits for the idea to voltNik:-) Update 20.4.2022: I replaced the model-files for those with threads…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is Drill Dust Collector and Guide V4 , the ultimate multi-functional dust management solution for drilling tasks! Use tree supports on overhangs. Key Features: Vacuum Compatible: Connects to vacuum cleaners with a 35mm diameter.…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Use tree supports :) Want to have a commercial licence on this model? → Join the CLUB :)
Wydruk około 2,90 €–3,54 € nettoWstępna wycena jednego wariantu
Simple drill and screw guide. Helps to drill perpendicular holes and screws. Tested over with my pergola project. Works fine. Super easy to get 90 degree angle. Scale for smaller objects. This one is designed for long (30cm) drills.…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…
Wydruk około 8,14 €–9,95 € nettoWstępna wycena jednego wariantu
Metric drill bit set wall mount 1mm to 10 mm
Wydruk około 2,69 €–3,29 € nettoWstępna wycena jednego wariantu
This imperial drill guide is the perfect helper for accurate drilling with bit sizes ranging from 1/8 – 3/8 . The guide is designed as a sturdy bar with clearly labeled holes , making it quick and easy to select the right size for your…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
This is a set of Depth gauge for 5-12 mm drills. They have a opening for M3 nuts an cylindrical screws to tight the stop on the drill bit. Printed with PETG @ 0,2mm layer hight with 20% infill.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The second version with improvements is available. Drill Dust Collector V2 Drill Dust Collector with Centering and Marking Features. The drill dust collector is an innovative accessory designed to collect dust during wall drilling with a…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
⚠ Important: Do not over-tighten the bottle to avoid damaging the print. Use tree supports only on build plate Introducing Drill Dust Collector and Guide V3 —the ultimate tool for keeping your workspace clean while drilling. This upgraded…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
Angle drill guide Possible to print in 2 colors (with one extruder) => change at specific layer For max 8 mm drill Requires a 20 cm / 20 cm print bed
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
Holder for a total of 23 drill bits with a size from 1 mm to 12 mm in 0.5 mm steps. The holder can be mounted on a wall with 2 countersunk screws. The drill bits holder is printed in 3 parts: holder, label and ruler (optional). The label…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
A very useful tool, when you have to exchange strings on many guitars Nothing special about the print. Standard PLA, Standard Settings. Used Brim, but not sure if it's needed. Found at https://www.thingiverse.com/thing:2842644
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Lets hang your DeWALT / Makita drill gun under your shelf! Designed for DeWALT DCD791, but it works also with Makita 6270D and probably with other similar models from different brands. Be sure to check also my other DeWalt hanger holders:…
Wydruk około 19,63 €–23,99 € nettoWstępna wycena jednego wariantu
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
This is a simple and easy to mount shelf for the corner of your shower. It is mounted with double sided tape and is big enough for 5-6 normal sized bottles. The design is sleek, simple and has a feeling that it is floating. There are…
Wydruk około 7,63 €–9,33 € nettoWstępna wycena jednego wariantu
Make a useful drill press from commonly available parts. Total cash outlay: around $20. This tool has height and speed adjustment built in. A full description of what goes where will be added over time. --2025_October: Hi gang! Another…
Wydruk około 2,71 €–3,32 € nettoWstępna wycena jednego wariantu
A drill bit holder for handy storage on a wall.
Wydruk około 10,97 €–13,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a version 2.0 of my simple drill guide (see version 1.0 here: https://www.printables.com/model/76157-drill-and-screw-guide-90-degree ). Upgrades: three part design, still no supports required compatible long and short drills now…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Starting from the excellent existing model of drilling bounding ring I designed my own using parametric features from Fusion 360 and added nice features like printed diameter size I tested it from 4mm to 12mm drill bits (The range I…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use Case : Printed at 101% scale to avoid any threading issues with my Dremels. Printed all four versions of the sharpener and was able to thread onto my Dremels without any clean-up or post-processing. Accessories : Dremel Lite 7760 -…
Wydruk około 10,70 €–13,08 € nettoWstępna wycena jednego wariantu
Drill Bits Holder Holder for a total of 23 drill bits with a size from 1 mm to 12 mm in 0.5 mm steps. The holder can be mounted on a wall with 2 countersunk screws. --- Bohrer-Halterung Halterung für insgesamt 23 Bohrer mit einer Größe…
Wydruk około 8,25 €–10,08 € nettoWstępna wycena jednego wariantu
Description: Enhance your drilling operations with this attachment that ensures a dust-free working environment. Its sturdy construction and integrated grid effectively prevent the spread of drilling waste. It’s the perfect addition for…
Wydruk około 3,89 €–4,75 € nettoWstępna wycena jednego wariantu
Organize your drill/driver bit cases using the Ryobi Link storage system. Prints at 0.30mm layer height without any supports. Printed with OVERTURE PETG Filament (Grass Green).
Wydruk około 10,63 €–13,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Łatwy w użyciu szablon do wiercenia pod zawiasy puszkowe 35 mm. Najlepiej zamocować go dwoma ściskami aby nie przesuwał się podczas wiercenia. Ma dodatkowo otwory do zaznaczania miejsc na wkręty zarówno pod zawias jak i prowadnik. Używam…
Wydruk około 2,50 €–3,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I based the design on a model by georgeprout on thingiverse - I added space for two more bits Original stl and SCAD file here: https://www.thingiverse.com/thing:4395136 This is a bit holder for 6 standard quarter-inch bits for a DeWalt…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
111mm X 84mm Drill Gauge: 9.00mm M3* 12mm and M3 locknut
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
It is not really an impact, it's more an indicator. Easy to print and easy to handle. Print it with PETG! Scale calculation: D(wish) /4,5*100% UPDATE: 22.12.23: I made the model a little bit stronger, because it is broken during drilling…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
German: Dies ist die neue Version des bei mir seit einem Jahr sehr bewehrten selbstansaugenden Absaugaufsatz für das Bohren in Beton- oder Ziegelwänden im Wohnbereich für das Bosch-Professional click and clean System oder das Kärcher C35…
Wydruk około 8,46 €–10,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Make drilling holes easier and faster with this 3D printable Adjustable Hole Marking Tool! This handy tool allows you to measure and transfer the exact distance between two mounting holes onto your workpiece. Simply adjust the sliding…
Wydruk około 1,99 €–2,43 € nettoWstępna wycena jednego wariantu
Drill debris & dust recover, the cleaning solution Updated! Supports: No Filament: PLA Time: 46m
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
Drill Bit Ballerina Gru. (Part of my stupid dangerous toys collection) Tiny ballerina not included.
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
Drill Bit Ballerina. You spin me right round baby right round like a Ballerina… baby. Yea... This is a terrible idea. Probably dangerous. This Ballerina is going to take your eye out.
Wydruk około 1,15 €–1,40 € nettoWstępna wycena jednego wariantu
RIDGID 18V Drill Holder Upside-down Position Perfect wall mounted storage for almost any of your 18V RIDGID battery powered drills and drivers. This mount may fit other makes as well. Remixed - Removed excess holes from base plate, added…
Wydruk około 10,37 €–12,68 € nettoWstępna wycena jednego wariantu
This tool has been designed to easily create a standard MFT like workbench and drilling 20 mm holes every 96 mm. This drilling jig has been printed in Prusa PETG from the the STL found on Thingiverse with supports. All details in 3MF file.
Wydruk około 3,35 €–4,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Aktualisiert am 20.11.2023: Neue Version "Ausrichtbolzen mit Sechskant" hinzugefügt. Jetzt können die Schrauben ohne zusätzliches Werkzeug angezogen werden. Updated on November 20, 2023: New version "Ausrichtbolzen mit Sechskant" added.…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
layer height: 0.20mm or lower. material : tested with PLA and PETG. requires 10mm bridging and decent bed adhesion.
Wydruk około 2,88 €–3,53 € nettoWstępna wycena jednego wariantu
Drill hole marker for IKEA complement hinges. For 19mm thick wood! !!! WATCH OUT !!! IKEA has changed the orientation for the softclose hinges, so check which markings are required for the model you are using. use Place the door and body…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
I found some files for the jeep rancher angry eyes but they were separate and required super gluing or screwing on. I had issues printing these and getting it to look clean due to supports being needed so I combined the two models and…
Wydruk około 2,84 €–3,47 € nettoWstępna wycena jednego wariantu
These letters have height of 4mm on top of a 10x10x10mm cubic pedestal. The letters are meant to be used manually, imprinting something on a clay surface letter by letter. Font - Calibri Size - 5mm height for capital letters Nozzle -…
Wydruk około 4,86 €–5,94 € nettoWstępna wycena jednego wariantu
A case for sorting all your drill bits. This was by the way my first design after I decided to take it back, and I made it with AutoCAD. Una caja para organizar tus brocas y machos de roscar. Este fue de hecho mi primer diseño después de…
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
Block for Drillbit Sharpening with Adapters for different Sizes.
Wydruk około 2,20 €–2,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you do not want to ditch your Dewalt drill bit case, then this custom 3x4 Gridfinity holder is for you!
Wydruk około 7,05 €–8,61 € nettoWstępna wycena jednego wariantu
This Model is designed to be mounted on different surfaces with M4-screws. It also has a self-locking-mechanism.
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
Ventilation grille 200x200mm for exterior use. Must be print in PETG UV resistent or equivalent. I used this grille to hide a Ø150mm ventilation pipe. I instal an anti-insect mesh between the grille and the wall.
Wydruk około 10,38 €–12,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To attatch Nanoleaf Shapes Trianglles with screws. After the Nanoleaf Support stated I should use a ruler to make drill holes for the Triangles I construct this drill template. Print with support! Printer: Artillery Sidewinder X1…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
I designed this drilling jig to assemble my BESTA cabinet doors on a METOD cupboard. Align the end of the jig with the end of your cabinet (your cabinet door ends here). There is a triangular cutout to mark the middle of the hinge, so…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
Hand Drill Spirit Level With this handy and low-cost device, you can check the degree of inclination while drilling a hole. With the two bubble spirit level, it works for horizontal and vertical drilling. The Hand Drill Spirit Level not…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Air Handler System - Fans and Grills - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have…
Wydruk około 2,96 €–3,61 € nettoWstępna wycena jednego wariantu
Druckeinstellungen : variable Schichthöhe Stützen nur auf dem Druckbett massive Schichten Decke: 5
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Simple and compact box for a set of wood drill bits. The lid has a tight fit so it will not open on its own. The drill bits are 3-10mm thick and between 70 and 130mm long. No specific print settings necessary. I used PLA and 0,2mm layer…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Wanted a fully customizable version of the really nice thing:4861011 from thingiverse by mishkin2. This version was redesigned from the ground up using CadQuery (2.1) in CQ-editor (0.2). The source code is included as…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mountain grille ornament with Toyota TRD style coloring. Ended up designing this after the shipment from China got lost in transit. \_(ツ)_/ Parts 2 x M4 4cm rods (I cut the heads off of two screws) 2 x M4 washers 4 x M4 lock nuts (regular…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Morse Taper 3 (MK3/MT3) x 2 drill bit holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. Print standing with 10% gyroid/grid infill and grid support from build plate only. The tool holder module couples with…
Wydruk około 3,98 €–4,86 € nettoWstępna wycena jednego wariantu
TL;DR first: This is very taxing on your printer! The mesh consists of a lot of intersecting shapes, and so this means a lot of movement and retractions. Be advised that you should make sure that your printer is maintenanced properly.…
Wydruk około 12,55 €–15,34 € nettoWstępna wycena jednego wariantu
Details: Sizes: 1, 1.2, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5mm Buy me a coffee If you like my work, you can buy me a coffee . Appreciated!
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
Hice dos diseños para el horno de un amigo que se le habían roto. Las imprimí el PLA pero no es lo más recomendable porque no tienen mucha resistencia al calor.
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Photo is from older version. Note: If you like this model or it made your life easier (and it's not behind a paywall), you can buy me a coffee.
Wydruk około 9,70 €–11,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
140 mm fan grill with hexagon pattern
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
There are lots of dust catchers out there for drilling into drywall walls. But I had to drill holes in my plaster ceiling. A lot of them. So I built this. It worked great for its main purpose. I have since parameterized it so it should…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
This was built around Craftsman tools but should work fine for other analogous brands by adjusting the parametric file. Print Settings .6mm nozzle at .32mm layer height. 3 perimeters for both vertical, top, and bottom. (Go higher for more…
Wydruk około 5,58 €–6,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sometimes I need to sand or polish a small area. I don't like to prepare then my belt or vibration sanders. That is why I designed this very simple flexible disk to be used by a handheld battery drill or screwdriver. It will accept…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Decided to make a 3D Flip version of the Jeep logo for a friend who recently bought a Wrangler. This was a great way to try out the new Organic supports which pulled off without a problem. Printed using Prusament PLA Galaxy Black.
Wydruk około 5,71 €–6,98 € nettoWstępna wycena jednego wariantu
This is the improved design of my vent that I originally designed for 3D printer enclosures. It has an optional grille on the outside and inside. By printing the vent with grilles on both sides, you can put a filter into it. The vent uses…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
On reading the comments from the original it appeared the screw holes were being reported as to small. https://www.prusaprinters.org/prints/55082-universal-cordless-drill-hanger So before printing I added an extra screw hole and increased…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
I struggled with the Grill template (until I realised it was meant to be printed in A3 Duh!) by which time I had already started this “project”. It's scaled to the original downloadable files so if you change the scale to fit you will…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
This is a modification of Stamos's remix of the Tripod Mobile Phone Clamp. A base plate for GorillaPods was added.
Wydruk około 4,25 €–5,20 € nettoWstępna wycena jednego wariantu
First things first. I can’t really take any credit for any of this model. The hat is an awesome model that I just made bigger and added some modifiers. The only reason I’m uploading it as a model is to make it easier for other ring owners…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
📝 Description 🌴 Abstract Minimal Animals – Jungle Duo (Low Poly) This set includes two powerful minimalist low-poly jungle animals designed in a clean, modern geometric style: Gorilla and Hippopotamus . The models are intentionally…
Wydruk około 2,17 €–2,66 € nettoWstępna wycena jednego wariantu
Following a suggestion from a maker that needed drilling depth stops for Imperial drilling bits, I reused the the Drilling depth stop (Metric) model I created and adapted my design to the main sizes used: 1/8", 3/16", 1/4", 5/16", 3/8",…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
eine schöne alternative zum ewigen Brille such ja wo liegt sie den zum ja meine Brille ist auf dem Elefanten gedruckt mit 15 % infill und einer 0,4 nozzel ist der Elefant in es knapp über einer stunde beim MK4S gedruckt. Habt spass damit…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
While searching for an efficient way to store my cordless drill, I came across several solutions. However, none of them met my requirements, so I decided to design my own storage solution. This design is specifically created for the…
Wydruk około 12,05 €–14,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Eine Halterung für die OptiGrill Backschale, um diese platzsparend unter Regalböden zu montieren. Schraubenempfehlung: 4,5x35 A holder for the OptiGrill baking tray so that it can be mounted under shelves to save space. Screw…
Wydruk około 4,88 €–5,96 € nettoWstępna wycena jednego wariantu
I wanted to reuse the chrome plate from the original knob but couldn't find an existing file, so I decided to make my own. It's not perfect but the plate fits, I added a tiny piece of clear 3M mounting tape for a more secure fit. Printed…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
I managed to get a second hand Sigma DP1 and DP2 Merrill for quite cheap, but realised that the LCD was quite useless in bright light. I managed to find a design on thingiverse which did exactly what I wanted, but the design required…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Originally AI generated and cleaned/modified heavily to look like an actual print and be able to be printable. It is a take on the original mini fig of Skrill from How to Train Your Dragon. I've printed it with an Ender 3 V3 SE using…
Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu
Summary This is the air intake grill for a Toyota snorkel. Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: Standard Infill: 80% Filament brand: Creality Filament color: Black Filament…
Wydruk około 4,95 €–6,05 € nettoWstępna wycena jednego wariantu
With this sign that you can put in a highly visible place in the community, you can warn that Sundays are for resting and not using the drill. Made with a 0.4mm nozzle and a size of 18x13 cm. I have uploaded 2 designs, with holes and…
Wydruk około 4,13 €–5,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Adjustable Corner Drill Guide offers precise drilling for corners. It's parametric, customizable, and prints easily without supports. Features: Fits 1-8mm drill sizes Current files fit 2, 3.25, 5, and 6 10mm spaced holes for accuracy…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My boy got a marbel run that that consists of individual parts. This way you can build your own runs, in our case with soundeffects as well. But one of the track from the manual showed a little flaw in the designe. One of the Parts, where…
Wydruk około 3,78 €–4,62 € nettoWstępna wycena jednego wariantu
Drilling template for yagi antenna elements. 08/10/12 mm élément and 4 mm drilling. 1 If you want the text, provide a 2 part print: -first print the file example : 08 10 12EL 04DRILL 1st layer 0.20 -second print above the 2st the file…
Wydruk około 0,04 €–0,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Top Thrill 2 is the new 2024 Rollercoaster for Cedar Point. Either use the .3mf project file in prusa slicer to automatically add the color change commands or print with the following settings: PLA is preferred but all colors should just…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
This is a model that I designed to help me make some custom aluminum extrusion pieces for a Voron 0.1 that I am building. While it was used for custom pieces, it could also be used to help you if you cut or source your own aluminum…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity - Gorilla Glue Organizer 1x2x4 Gridfinity glue organizer. Holds super glue and normal gorilla glue bottles. Prints without supports. Color change at layer 28.2 for coloring in photo.
Wydruk około 1,40 €–1,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
small ergonomic handle for ¼" keyless chucks or any other tool with a ¼" hex shaft. It's a simple pressfit with a 6.5mm modelled hex receptacle. On a Prusa Mk3s+ 0.3mm speed its a decent pressfit that does not require too much force but…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
a simple drill guide for standard 3 or 4 inch door and drawer pulls to aide in getting everything square and clean. Printed here in PET-G since it is a tool and may get exposed to heat. I made this for a bathroom installer.
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
small diameter depth stops, cone nose to aid in chip clearance and visibility, uses 3mm x 12mm Cap head bolt and 3mm hex nut
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
This drill guide is intended to perform a precise perpendicular drilling to the surface. The tool is designed to exchange two cylindrical attachments with different drill diameters. One cylinder goes from 1-10mm and the second from…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
paint can shaker can be attached to any drill with a standard ¼" bit. use this to shake paint cans. print in two pieces and glue the two together. make sure not to glue the fins to the base. i used petg for the strength and flexibilty.…
Wydruk około 6,95 €–8,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My settings: PETG 4 walls 20% gyroid infill 0.2mm layer height (Prusa Slicer ‘0.2mm QUALITY’ profile)
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I got tired of having off-center and crooked predrill holes for installing the MultiBoard Core grids in my UnderWare (https://www.printables.com/model/941161-underware-the-ultimate-cable-management-solution) system, so I made this small…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
A simple mount to keep your Ryobi drill or drive packs under a shelf. Use two business cards as a spacer between one mount and the Ryobi pack to get the spacing right before screwing into your shelf.
Wydruk około 2,53 €–3,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to make better use of my Dremel Drill Press workstation for other pressing tasks without compromising stock utility. The system consists of a dummy rotary tool head that mates with the press and will then accept future…
Wydruk około 6,99 €–8,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a horizontal (box) or vertical (wall) mount for a milwaukee drill driver type 2407-20. It mounts with a just a few screws. I use this for my box with powertoolholders (see my other models/collections).
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
This is a License Plate mount I made because I refused to drill into the Bumper of my new car (and don't like how it looks when you put it in the windshield). So I made this. It clips around the lower Grill of some 2025 Ford Mavericks.…
Wydruk około 3,29 €–4,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a little speaker grill i designed for an Arcade Cabinet i build for our local makerfaire. The grill is for 100mm speakers. Hope you like the “Makey” in the middle. :)
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
![Simple Parametric Drill Holder [No Supports]](https://media.printables.com/media/prints/647502/images/5117114_ae712046-2bb2-4ee9-b58c-256a02c0928e_ea100415-6e00-49d6-ad56-c15068b2ea01/img_20231115_132147.jpg)
