Wyniki wyszukiwania: s100

Sortowanie

Liczymy pasujące modele…

P

TS100 Soldering Iron Box & Tip Holder

Case for TS100 Soldering Iron & Additional Tips . Uses 1.75mm filament for hinges, and 4mmx2mm Round Neodymium Magnets Outer Dimensions: 179mm x 38.6mm x 25.8mm Also have a look at my Fume Extractor & TS80 Case UPDATE v27: with better…

Wydruk około 5,56 €–6,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
861
Polubienia
143
Ocena
4,91
P
PrintablesPetar Ivanov

TS100 Case R3d

This is a case for TS100 soldering iron. It is made by JamesK1. Link to original .

Wydruk około 5,53 €–6,76 € nettoWstępna wycena jednego wariantu

Pobrania
464
Polubienia
58
Ocena
4,85
P
Printablessternli27

DIY Makita Bosch 18V Battery Holder Receptacle Socket for TS100 and TS101 Soldering Iron Batterie Lötkolben

18V Makita Battery Adapter: See my design here https://www.printables.com/model/436132/ 18V Bosch Professional Battery Adapter: See my design here https://www.printables.com/model/427974/ 1x Power Switch: Switch size 21 x 15mm Front…

Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu

Pobrania
343
Polubienia
129
Ocena
5
P
PrintablesÓscar

Featherboard for Scheppach HS100S table saw

What is a featherboard for a table saw? Essentially, it is a second pair of hands that provides better grip and accurate cuts . Fastened to the tabletop or fence a featherboard ensures that the wood is safely and effectively hold and fed…

Wydruk około 16,59 €–20,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
139
Polubienia
17
Ocena
0
P
PrintablesMicha

Adapter Somfy RS100 io Smoove Pure

The wall transmitters for my roller shutters were flying around for a long time. I like to be flexible, so I did not like to use screws to attach the wall transmitters. Also, that's why the adapter is in two parts. There is a carrier…

Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu

Pobrania
81
Polubienia
4
Ocena
5
P
PrintablesStrayCat

Luggage wall bracket for BMW F800 R, S, ST, GT and S1000XR(K49)

Der Lochdurchmesser des Halters ist 6,1 mm. Zur Wandbestigung habe ich eine Spax-Schraube in 6x120 mm benutzt. The hole diameter of the holder is 6.1 mm. For wall mounting I used a Spax screw in 6x120 mm.

Wydruk około 1,37 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
78
Polubienia
7
Ocena
0
P
PrintablesFilcuk

Pinecil & TS100 Case Solder Reel Clip

This clip was made for the reel from Pinecil, TS100, TS101, TS80 & TS80p Case with options, Stand, Solder Reel, Storage Box . You may also want to try Stronger Spool No Supports by @crashkg , instead of the original.

Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu

Pobrania
56
Polubienia
11
Ocena
0
P
Printablesnbasse

TS100 tip holder with version for IKEA skådis

Holder for 5 spare tips for the TS100 soldering iron and the matching hex key. Main version has hook and pin for attaching to a IKEA skådis pegboard. Also includes version with smooth back for attaching with double sided tape, command…

Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu

Pobrania
55
Polubienia
6
Ocena
0
P
PrintablesJPMakesStuff

Replacement mounting back for HomeSeer HS-DS100+ Z-Wave Door-Window Sensor

Replacement in case you break the tab off like I did Designed for: https://shop.homeseer.com/products/z-wave-door-window-sensor HomeSeer HS-DS100+ Z-Wave Door / Window Sensor

Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
29
Polubienia
1
Ocena
0
P
PrintablesPjotrStrog

Rugged Multipart Pinecil/TS100/TS80 Case (V2)

Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…

Pobrania
26 389
Polubienia
8079
Ocena
4,95
P
PrintablesPjotrStrog

Multipart Pinecil/TS100 Case

Remixed the original large Pinecil case to be printed in multiple parts/materials. Reason: because it looks good.;) Tolerance between the outer and inner parts is 0.1 so it should fit nice. Glue the inner to the outer parts. Be sure to…

Pobrania
4247
Polubienia
1133
Ocena
4,97
P
PrintablesAikano9

Double Layer Rugged Multipart Pinecil/TS100/TS80 Case (V2)

Doubled the thickness of the base so that it can fit a second insert, and therefore all 7 tips

Pobrania
2805
Polubienia
541
Ocena
5
P
PrintablesBenschCraft

TS101 ALL-IN-ONE (TS100/101)

Here is a remix of me, since I needed more space for accessories and unfortunately the long soldering tips did not quite fit, so that I also fitted it, I also redesigned the lower compartment.

Pobrania
2493
Polubienia
517
Ocena
4,9
P
PrintablesTheCafeRacer

PINECIL & TS100/101 ALL-IN-ONE CASE

-Uses six M3x20 screws for the hinges and latch. -Uses two 3mm x 1mm magnets for the small parts storage compartment (optional). Storage for: 1 x Pinecil (TS100/TS101 BETA versions still testing) 7 x Short Tips (6 x Tips for TS100/TS101…

Pobrania
2311
Polubienia
459
Ocena
4,85
P
Printablesmt_benno

2020 BMW S1000RR

This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.

Pobrania
1577
Polubienia
38
Ocena
0
P
Printablesinjectx

Improved Pinecil, TS100, TS101, TS80 stand

Saw different versions of the stand and decided to combine a few ideas and create a new version: Reinforced Stability: Thickened the stand's design, ensuring it remains securely in place. Effortless Removal: Added grip makes detaching the…

Pobrania
1089
Polubienia
150
Ocena
5
P
PrintablesRemcoGoy

Larger Bottom Insert for Rugged TS100/Pinecil/TS80 Case

Print both files from this model, the rest of the files can be used from the original model. If you have any question, feel free to contact me.

Pobrania
1055
Polubienia
235
Ocena
4,88
P
PrintablesDrSnake74

Lego BMW s1000 RR wall mount

Made in PLA, For Lego technics BMW S1000 RR wall mount. added a hole to mount the description plate Printer settings recommended 25% infill 3 walls. Support: yes Brim : No About 105gr of filament

Pobrania
687
Polubienia
73
Ocena
5
P
PrintablesChar

CNC Kitchen Heatset Insert for Rugged Multipart Pinecil/TS100Case (V2)

I took the Pinecil/TS100 Top Large B insert from the original case and modified it to hold the CNC Kitchen Heatset tool and tips. I also changed the stand holder to be easier to remove by pressing on the base.

Pobrania
684
Polubienia
143
Ocena
4,73
P
PrintablesTheCafeRacer

Pinecil & TS100/101 Stand w/ Finger Groove for Removal

A soldering iron stand for your PINECIL & TS100/101 “RUGGED CASE” w/ finger groove for easy removal. Needs a 608 bearing, M3 screw, and M3 hex nut like the original. Optional M3 heatset insert option added (5mm OD x 4mm Length).

Pobrania
647
Polubienia
66
Ocena
5
P
PrintablesmahatmaJman

TS100 Dewalt battery adaptor

Iron stand and adaptor clip for TS100 iron and Dewalt Li-Ion batteries. Use 0.5mm copper sheet for the connecting blades, and XT60 connector for connection to TS100 standart XT60 lead. Use the printable jig to solder the connector to the…

Pobrania
594
Polubienia
336
Ocena
4,75
P
PrintablesAlex

TS100 3D Model

This is 3D model for TS100 digital mini soldering iron, which can be used to design TS100 accessories (boxes, stands, holders, etc.). Model include Fusion 360 project, as well as STL files for: TS100 body, TS100 tip, TS100 with tip. I…

Pobrania
535
Polubienia
57
Ocena
5

Gridfinity Pinecil / TS100 Stand

This is a Gridfinity stand for the TS100 / Pinecil soldering irons. IMPORTANT: This uses the Strong Stand by Termiman . The base uses the Gridfinity Refined design, so you can press fit magnets in to the base, rather than requiring glue.

Pobrania
503
Polubienia
113
Ocena
4,92
P
Printablesmt_benno

2008 BMW S1000RR

This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.

Pobrania
495
Polubienia
18
Ocena
0
P
PrintablesThorou

Gridfinity TS100 Tray

A shallow tray to store your TS100 soldering iron, up to 5 tips and various accessories below. The iron and tips can easily be removed by pressing down on one side. For Gridfinity by Zack Freedman .

Pobrania
489
Polubienia
105
Ocena
5

TS100 Case

Custom case for the awesome TS100 soldering iron. Product Links TS100: https://www.banggood.com/MINI-TS100-Digital-OLED-Programmable-Interface-DC-5525-Soldering-Iron-Station-Built-in-STM32-Chip-p-984214.html?p=2@3021069489201207MV Extra…

Pobrania
461
Polubienia
120
Ocena
4
P
Printablesedmogeor

Pinecil, TS100, TS101, TS80 & TS80p Case - Improved Stand (M3 Heat-set Insert, Finger Pull, Thickened)

I had a few issues with the existing version of the stand for @termiman's and @PjotrStrog's soldering iron cases. The stand was a loose fit in the case when stored, causing it to fall out, and it was slightly fiddly to remove. The stand…

Pobrania
461
Polubienia
45
Ocena
5
P
PrintablesZombie Batman

Flux Paste Box for Rugged Multipart Pinecil/TS100/TS80 Case

A small container for flux paste. Fits in the unused space above the tips for the Top Large insert. Use some glue to secure the box to the insert. Find the case here:…

Pobrania
453
Polubienia
92
Ocena
5
P
Printablesjk_printer

Pinecil / TS100 8x tip storage insert for "Rugged Multipart Pinecil Case V2"

Updates 11/2025: Added a version for third party tips with 4.0 mm shank size (thin section directly behind the heating element at the front). The original Pine64 short tips come in 3.65 mm shank size, as do many third party options. But…

Pobrania
450
Polubienia
61
Ocena
5
P
Printablesayanev

10" Server rack 1U panel - LS1008G TP Link switch

10" Server rack 1U panel - LS1008G TP Link switch Designed 2021-08-08 thing:6195220 printables:568385 TOC 10" Server rack 1U panel - LS1008G TP Link switch TOC Summary Description Buy me a coffee? Summary 10" Server rack 1U panel for…

Pobrania
438
Polubienia
51
Ocena
5
P
PrintablesDakoriki

CNC Kitchen TS100/Pinecil heat insert tip gridfinity bin

CNC Kitchen TS100/Pinecil heat insert tip holder bin for gridfinity

Pobrania
433
Polubienia
112
Ocena
4,6
P
Printablesdodasch

TS100 Stand

You need 1 additional washer with 2mm thickness and 25mm Diameter. Optional, put some weight under the holder, to ensure that it has a good stand.

Pobrania
426
Polubienia
117
Ocena
5
P
PrintablesLndnny

Rugged Multipart TS100/TS80 Large Lid with Miniware Logo

This is a remix of PjotrStrog's Rugged Multipart Pinecil/TS100/TS80 (V2) case. I've added the Miniware logo cutout to the large size lid for TS100 and TS80 users.

Pobrania
414
Polubienia
61
Ocena
5

Jaguar SS100 Year 1936 scale 1:24 designer Ed van der Heijden

Rafts: Yes Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA

Pobrania
404
Polubienia
69
Ocena
5
P
PrintablesAngel Rivas

U1 10" Inch Rack Mount for Raspberry Pi 4 and TL-LS1005G

[Update 7th of May 2025]: Fixed the fitment issue for the switch, and also made a cutout hole for the Raspberry Pi 4's SD card slot.

Pobrania
396
Polubienia
50
Ocena
4,5
P
Printablesmt_benno

2015 BMW S1000RR

This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.

Pobrania
392
Polubienia
19
Ocena
0
P
Printablesmaddash1337

Gridfinity TS100 + 3 Tips + Soldering Pump + Solder

Gridfinity TS100 + 3 Tips + Soldering Pump + Solder

Pobrania
382
Polubienia
62
Ocena
5
P
PrintablesDalkain

Gridfinity TS100 All-in-One Organizer with Dust Cover

This is an all-in-one solution for a TS100 soldering iron for use in the Gridfinity organization system by ZackFreedman This is clearly inspired by both ZackFreedman's Gridfinity Pinecil + TS100 Tips and Tool Holder and pelrun's…

Pobrania
375
Polubienia
63
Ocena
4,4
P
PrintablesTeo_211

BMW S1000RR Superbike Wall Art

If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211

Pobrania
370
Polubienia
53
Ocena
5
P
Printablesfl0cko

TS100 Drawer Insert for Stealth Press Drawer Add-on

This is a drawer insert for the Stealth Press 1S Drawer add-on to accommodate the recommended heatset insert tip for the TS100/TS101 soldering iron. Stealth Press 1S Drawer Add-on TS101 heatset insert tip

Pobrania
352
Polubienia
61
Ocena
5
P
PrintablesNikzda

AliExpress Heatset Insert for Rugged Multipart Pinecil/TS100Case

I used the following one, i can't guarantee that all AliExpress versions will fit though. https://www.aliexpress.com/item/1005006503495825.html?spm=a2g0o.order_list.order_list_main.16.13111802lsBWzr This will fit the M2, M3, M4, M5, M6…

Pobrania
339
Polubienia
80
Ocena
4,82
P
PrintablesForgelab

TS100 Rugged waterproof box

Model I designed this case to carry both the Miniware TS100 and its accessories, including the battery. The box is divided into 2 levels, the lower one can accommodate ESD tweezers, a solder holder , the 50cm cable and space for adapters…

Pobrania
338
Polubienia
316
Ocena
0
P
Printablescrhou1

Screw-Top Flux Jar for Rugged Pinecil/TS100/TS80 Case (V2)

This small container integrates screw threads and aligns perfectly with the empty space in the upper lid of the rugged Pinecil/TS100/TS80 case. This was designed to be pressure fit without needing to be secured with glue. I can't attest…

Pobrania
325
Polubienia
38
Ocena
5
P
PrintablesRyan G

TS100/TS101 Soldering Iron Holder Arm for Heat Insert Press

Based on the other holder arms provided by @BaGooN, I created a version to perfectly fit my TS100 soldering iron. This design uses only one screw for retaining the soldering iron, to preserve the ability to press both buttons on the side…

Pobrania
325
Polubienia
99
Ocena
5
P
PrintablesSedimenti

Shell TS100 Soldering Iron

Replacement shell for the TS100 if you also want CAD files (F3D and STEP) go HERE The original appearance has been modified to make it more ergonomic for precise and continuous use. The project is based on BogdanTheGeek's drawing.

Pobrania
315
Polubienia
46
Ocena
4
P
PrintablesTpp4

Multicolor TS100, TS101, TS80, TS80P, & Pinecil Cutout Case

Use this top outer shell to label your case for your TS100, TS101, TS80, TS80P, or Pinecil. This is just the outer case. Go to the original model to pickup the inserts and the bottom half of the shell.

Pobrania
314
Polubienia
60
Ocena
5
P
PrintablesKrafťákSvK

IBC adapter S100x8 to G2

This adapter converts the S100x8 thread to a smaller G2 (2") piping thread. Handy for connecting bigger hoses. Made in Fusion 360. You should place a rubber ring / seal on the end of the S100x8 thread. Print in the provided orientation,…

Pobrania
309
Polubienia
12
Ocena
0
P
PrintablesChar

Double Layer Lid for Rugged Multipart Pinecil/TS100/TS80 Case (V2)

I printed and used the Double Layer case remix for my soldering iron and have liked it a lot. My biggest problem with it though was that when fully opened the lid did not sit flush on a table like the base does. To resolve this I made the…

Pobrania
306
Polubienia
58
Ocena
0
P
Printablesmaltvat

TS100 8 TIP CASE

I remixed the original design to hold 8 tips in 1 box. If you only want to use 1 of the sides (to hold 4 tips) it will work with the original boxes. Since mjcopper so generously offered his STEP files (thank you!) I will continue and…

Pobrania
300
Polubienia
53
Ocena
5
P
PrintablesNoloxs

TS100 Power Adapter for Makita Batteries

A simple XT60 snap-on adapter for Makita batteries, but I only recommend using the ones with the little star marking on them, as these are the only ones with battery protection. I have an Instructable here describing the how-to:…

Pobrania
297
Polubienia
86
Ocena
5
P
PrintablesLoss of signal

TS100 - Gridfinity

Another Gridfinity TS100 tray - this one accomodates for the usb-c power cable.

Pobrania
287
Polubienia
111
Ocena
5
P
PrintablesAdrian

TS100 Soldering iron Stand

I love this little soldering iron but it doesn't fit the holder i have... so i made one. Designed in onshape in 2 pieces. I used an M8 washer(22mm outer diameter and 8mm inner) as the point of contact which press fits into a clip. The…

Pobrania
281
Polubienia
86
Ocena
4,86
P
PrintablesAgar

Bosch GBA 18V Battery Connector/Adapter (e.g. TS100)

About Bosch battery connector or adapter. With this adapter you can use your Bosch professional (blue series) 18V batteries (Typ: GBA18V) to power other devices, e.g. the popular TS-100 soldering iron). Instructions You need to print the…

Pobrania
250
Polubienia
26
Ocena
5
P
Printablestjb1

Double Layer Rugged Multipart Pinecil/TS100/TS80 Case - Easy Reach

Changed the parts around latches to make them easier to reach

Pobrania
249
Polubienia
41
Ocena
5

Dremel Workstation TS100 Adaptor

This is an adaptor mount to fit a TS100 soldering iron to a Dremel Workstation drill press. This allows the press to be used to melt threaded inserts into a 3D print more precisely. The threaded part of the mount screws directly into the…

Pobrania
248
Polubienia
45
Ocena
4,33
P
Printablesviktak

TS100 soldering iron tip holder

You need to print 2 copies of the box and one copy of the pin to hold them together as a hinge. As the pin is waaaay too long to be printed standing up, or it would need supports, I cut it in half, and printed 2 copies of it too, then…

Pobrania
245
Polubienia
64
Ocena
5
P
PrintablesAlvaro Alvarez

Blank Insert for Rugged Multipart Pinecil/TS100/TS80 Case

I decided to create a blank insert to store different things in the Rugged Multipart Pinecil/TS100/TS80 Case. I tested it with @aikano9's remix which allows me to have a multipurpose space on a second level.…

Pobrania
244
Polubienia
23
Ocena
5
P
PrintablesTheMagiciaN

Pinecil, TS100, TS101, TS80 Stand for Storage Box with thicker stem

I printed the rugged case for my TS100 (https://www.printables.com/model/345083-rugged-multipart-pinecilts100ts80-case-v2) and noticed, that the stand for the soldering iron would not snap securely into the top of the case. Also the…

Pobrania
238
Polubienia
33
Ocena
5
P
PrintablesPlok

Pinecil, TS100, TS101, TS80 & TS80p Thickened Stand

In case the original stand is too loose for your case you could give a try to this one. It just has a small bulge in the place it connects to the case and that's it.

Pobrania
231
Polubienia
35
Ocena
0
P
PrintablesLayers Studio

CNC Kitchen TS100 Solder Tips Case

Here is a case for the new threaded insert tools from CNC Kitchen designed for the TS100 soldering iron. Print with no supports in as much detail as you like. For assembly requires: 8x 4mm x 1.8mm magnets TS100 threaded insert tips can be…

Pobrania
229
Polubienia
68
Ocena
4,83
P
Printablesltlowe

TS100 Soldering Iron Stand with Makita 18v Adapter

A TS100 soldering station designed to hold the iron, tip cleaner brass wool, and various battery adapters. I started the design for a Makita/Bosch adapter I bought from Amazon, but switched to a 3d printed model. I am including my remix…

Pobrania
227
Polubienia
72
Ocena
0
P

Earphone Case with Clip for ES100

This model includes the sliding lid. Having printed the original user's model at 115%, I've found that at 115% it's only just big enough for my Moondrop SSP IEMs with the stock cable. As such I scaled the model up to 140%. When you slice…

Pobrania
222
Polubienia
13
Ocena
5
P
PrintablesKevinHaeusler

TS100/1 CNC Kitchen Threaded Insert Gridfinity 3x2 Tray/Box

I needed a TS101 + CNC Kitchens Threaded Inserts Storage Solution for my existing Gridfinity setup (Ikea Alex) so I designed this quickly in Fusion 360. The Gridfinity bin itself was generated by the Fusion 360 Gridfinity Plugin, the…

Pobrania
220
Polubienia
42
Ocena
5
P
PrintablesdotPUNK Labs

Gridfinity Pinecil / TS100 Soldering Iron Stand

a gridfinity magnet base for the pinecil and ts100 soldering iron, has a compartment for brass sponge to replace the giant spring soldering iron holders. designed so the tip does not extend past the back side of the base so it can still…

Pobrania
219
Polubienia
41
Ocena
5
P
Printablesopirat
Pobrania
218
Polubienia
29
Ocena
0

Full Range Speakers, 4" Dayton Audio RS100-4

I've been working from home for over a year and felt my PC desktop audio system needed an upgrade. These full range speaker are based on the Dayton Audio RS100-4, 4 inch driver. I 3d printed the cabinet shown here in PLA and I've now…

Pobrania
214
Polubienia
33
Ocena
0
P
PrintablesSapuSeven

Heatset Insert and Triple Tip Storage for Rugged Multipart Pinecil/TS100 Case

This insert takes the original “TS100/Pinecil Top Large” insert and adds storage for all 7 heatset insert bits that come with the AliExpress tip. Also has a bit larger tolerances, which makes it easier to remove the small bits.…

Pobrania
213
Polubienia
44
Ocena
5
P
PrintablesCNC Kitchen

Case for TS100 / TS101 Heat-Set Inserts Soldering Iron Tips

3D Printable case for the CNC Kitchen TS100 / TS101 Heat Set Insert Soldering Iron Tips compatible with, for example, Pinecil or Miniware irons. Fits the Insert Extractor V2 (not the V1). Compatible with: (GLOBAL - shipped from Germany)…

Pobrania
213
Polubienia
47
Ocena
4,9
P
PrintablesChytrusek

TS101 Skadis iron holder (maybe TS100)

This is a holder for Miniware TS101 soldering iron. It's meant to be a pretty tight fit, that's still easy to use (insert and remove iron). I'm using the provided finger shield, that this socket is made to accomodate, but TS101 or other…

Pobrania
206
Polubienia
41
Ocena
4,83
P
PrintablesHans

Einhell To XT60 (TS100) And USB Adapter Power X Change

This is an adapter to power a device via 24V XT60 and/or USB from a Einhell Power X Change battery. I created it to power my TS100 soldering iron and a fume extractor (aka fan) from the Einhell batteries. Of course you can power any USB…

Pobrania
205
Polubienia
54
Ocena
5
P
Printablesfysiks

TS100/Pinecil soldering station and stand

Remixed from TS100 Soldering Station on Thingiverse by sunbart . A stand for the wonderful TS100 or Pinecil soldering iron, with a place for a copper wire tip cleaner and a spool of solder. This remix does not require the bearings or…

Pobrania
201
Polubienia
58
Ocena
4
P
Printablesmadberg

Pinecil, TS100, TS101, Case with USB-C adaptor and shrinked to fit on Prusa Mini

Made the case bigger to include USB-C power adaptor. It can be printed on a Prusa Mini Remix of https://www.printables.com/model/237958-pinecil-ts100-ts101-ts80-ts80p-case-with-options-s

Pobrania
200
Polubienia
68
Ocena
4
P
PrintablesCrambambuli

TS100 Case with holder

new hinge. → You can now put the case flat on the table. Made a holder. Push down to lock the holder. Bearing : cheap 608zz, 608Rs… remove covers and degrease the bearing to reduce heat transfer .. It you will melt the holder Use filament…

Pobrania
198
Polubienia
51
Ocena
4,5
P
Printablesf4r0kh

TS100 rugged case SYRINGE INSERT

The original model is made by Termiman, later a mamber PjotrStrog created a nicer and reinforced version of this case, but did not upload an insert that holds a 6ml flux syringe. Since I prefer to have my flux in the case instead of the…

Pobrania
194
Polubienia
44
Ocena
4,5
P
PrintablesKytor

Pinecil, TS100, TS101, TS80 & TS80P Stand (Square Nut)

Holder uses 608 bearing, M3 Square Nut and Bolt.

Pobrania
193
Polubienia
25
Ocena
0
P
Printablesblmak

ts100 grip

The ts100 soldering iron is a great iron but I have always thought that the grip wasn't very good and I was always scared to loose grip and touch the hot tip, so I designed this grip! I designed three attachment systems, choose the one of…

Pobrania
191
Polubienia
35
Ocena
5
P
PrintablesRockNLol

Gridfinity Storage Container for CNC Kitchens TS100 Heatset Insert Tip

A 3x1 Gridfinity Storage Container for CNC Kitchens TS100 Heatset Insert Tip in the Sizes M2-M8.

Pobrania
188
Polubienia
43
Ocena
5
P
PrintablesAnubis X

IBC Cap S100x8 to HT 75mm pipe

Adapter for emptying and cleaning IBC containers. IBC cap with S100x8 thread and HT 75mm connection.

Pobrania
185
Polubienia
12
Ocena
0
P
PrintablesBrian.Kuo

SKADIS TS100 Soldering Iron Mount

Remix of Yuri's TS100 wall mount for SKADIS pegboard. Used the hooks from bjorntm 's Thingiverse design Stanley Wirestripper holder for Skadis . Printed in Overture PETG, PLA may work. Use supports, I found printing on the side is easiest.

Pobrania
182
Polubienia
36
Ocena
4,5

EleLab_v2 TS100 soldering station

EleLab_v2 TS100 soldering station For general information and building instructions about this project please see the Github repo ! Also check out the collection of the whole EleLab system here ! The EleLab system is a low cost, modular…

Pobrania
177
Polubienia
79
Ocena
5
P
Printablesf
Pobrania
175
Polubienia
14
Ocena
1
P
PrintablesAxField

TS100/TS101 stand for HSW - with heatset holder

A TS100/TS101 stand for HSW with additional pockets for the CNC Kitchen heatset insert tool bits. This one should be printed upside down (as oriented in the STL) to allow for the HSW plugs to be properly printed.

Pobrania
173
Polubienia
48
Ocena
5

Caravan fridge fan mount for 2x 120mm fans in Dometic LS100 cutout

I wanted something which fits exactly in the cutout of the Dometic LS100 ventillation grille. As there is only little space between the cooling fins and the Ventilation grille at my caravan, I needed a solution for 15mm fans. While…

Pobrania
169
Polubienia
10
Ocena
5
P
Printablesstr470s

TS100 Handle + Honeycomb Holder

Print tip: Put supports under the Honeycomb holder (place marked on the image)

Pobrania
168
Polubienia
31
Ocena
5
P
PrintablesAndreas Mass

Storing solution for TS101, TS100 soldering iron & addtional tools

This is a set of gridfinity based containers/bins which I created to fit a TS101 & TS100 soldering iron and other soldering related tools. There was always something I didn't quite like about existing designs and wanted something custom…

Pobrania
166
Polubienia
91
Ocena
5
P
PrintablesGreatOldOne

Milwaukee Fuel TS100 / Pinecil Power Adaptor

An adaptor based on macsboost's Milwaukee connector, to allow you to use your TS100 soldering iron on an M18 Fuel battery. Print instructions Category: Electronics Summary An adaptor based on macsboost's Milwaukee connector, to allow you…

Pobrania
166
Polubienia
51
Ocena
5
P
PrintablesVincja

TS100 Holder

Holder for TS100

Pobrania
163
Polubienia
51
Ocena
5
P
PrintablesAmir

Frame plug for S1000R

Cover that ugly shiny part of the frame with this simple black plug. This is for the S1000R 2021 and up Printed with Bambu X1C (default-ish settings): 0.4 nozzle 0.24mm Draft 90% infill

Pobrania
163
Polubienia
9
Ocena
0
P
Printableseric-ao

Solder pen/iron holder (for TS100 etc.)

After using a popular TS100 soldering pen holder (ref. mightynozzle , ID 2385609), I found that I didn't need the sponge or the variable angle. Clumsy as I am there were also a couple of accidental burns due to the iron being rather…

Pobrania
162
Polubienia
35
Ocena
4,67
P
PrintablesJamesK1

TS100 Case R3d

Just slightly modified the remixed source.. added friction clasps and remove the pins on the top lid as I found it causing a fitting problem. FYI. The one I printed has one clasp in the center versus the updated model has 2 clasps. No…

Pobrania
162
Polubienia
21
Ocena
5
P
Printablesltlowe

More 4-tip Inserts for Pinecil/TS100 Rugged Case

These inserts are for TS-100 style tips and fits "Rugged Multipart Pinecil/TS100/TS80 Case (V2)" only. Does not fit V1 case nor TS-80 tips. I really like PjotrStrog's Rugged Multipart Pinecil/TS100/TS80 Case (V2) , but I found the tips…

Pobrania
159
Polubienia
17
Ocena
0
P
PrintablesNam N

TS100 Soldering Station

A holder for TS100 soldering iron that encompasses the soldering iron tip holders, solder spool holder, and tip cleaner. Source file included so feel free to use it for your remixes :) Category: Tool Holders & Boxes

Pobrania
157
Polubienia
47
Ocena
5
P
Printablesbdahlem

Gridfinity Pinecil, TS100 Heat Set Insert Tip Holder

This is a Gridfinity bin to hold the Pinecil, TS100, TS200 heat set insert tip set from CNC Kitchen. The bin itself was created with the GridfinityGenerator plugin for Fusion 360 by Lev Mishin. Printed on Bambu Labs P1S in PLA. 0.2mm…

Pobrania
155
Polubienia
35
Ocena
3
P
Printablesemmie

Soldering station & brass wool holder for Pinecil/TS100

Soldering pen and brass wool holder. Fits Pinecil, TS100, or similar soldering pens Printed in PLA. Balanced, no weights needed. 3 hour 20 minutes print on an Ender 3 V2. Hardware : 8mm ball bearing(608, 22mm outer diameter) for soldering…

Pobrania
155
Polubienia
38
Ocena
4,5
P
PrintablesJan

TS100 case insert for flux syringe

This is remix of insert for awesome TS100 pinecil case. https://www.printables.com/model/345083-rugged-multipart-pinecilts100ts80-case-v2 This remix has place for 5 ml syringe with flux. Outer diameter of syringe is 13.7 mm, maximum…

Pobrania
154
Polubienia
30
Ocena
5
P
PrintablesSveinHa

DooGee S100Pro Land Rover 90/110/Defender ashtray mount.

Need supports everywhere. The connection between ashtray mount and adapter is a tight fit so it may be wise to print outer perimeters first. 4x 3.5x16 mm wooden screws and 1x M6x20 with nut/wingnut needed. I printed the first one in PLA…

Pobrania
154
Polubienia
13
Ocena
0
P
PrintablesMartin Žák

Box pro Omnifixo a TS100

Tištěno z PLA+ Mladeč, magnety 10x3mm od Unimagnet.

Pobrania
153
Polubienia
43
Ocena
5
P
Printableshallonhatt

TS100 Soldering iron slim case

A slim case for the TS100 soldering iron without any wiggle room and a friction fitted cap. Protects the iron in my toolbox. Buy the TS100 on Banggood (Affiliate link) Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: No…

Pobrania
153
Polubienia
32
Ocena
5
P
PrintablesTeefax

Table insert Scheppach hs100s table saw

A replacement insert for a Schepacht hs100s table saw. I made my final print in ABS and glued the two parts together with a small amount of aceton. You may need to add small supports to the screw insert and the top clip. The dovetail…

Pobrania
145
Polubienia
18
Ocena
5
P
PrintablesdeKay

SnapLock TS100/101/Pinecil soldering kit storage box

Fully printable travel box for my soldering kit. No additional hardware required. Uses SnapLock latches for locking the box closed. Holds a full assortment of kit: TS100/TS101/Pinecil or compatible soldering iron Power adapter USB power…

Pobrania
144
Polubienia
34
Ocena
0