528 modeli
This mount has been designed to conceal an airtag under a bike saddle, between the metal rods usually found under it. Why another bike saddle mount for airtags I know, there are numerous designs out already, exactly like this one, but all…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
Summary: There are various version of this simple shotgun shell holder / side saddle available. On the uploaded pictures (Maverick 88) I used the 12G_5pcs_25mm__straight_velcro version. As Filament I used Prusament PETG with Carbon Fibers…
Wydruk około 2,22 €–2,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
saddle holder for Schleich Horse Club, easy to print, easy to glue the gcode and 3mf file includes manual paint-on seams for (hopefully) optimal printing my other parts for schleich horse club:…
Wydruk około 1,30 €–1,58 € nettoWstępna wycena jednego wariantu
Put together your own little western train The Sattle Tank locomotives are pure workhorses that help to create space or move wagons over short distances. There are also 2 wagons that transport either timber or livestock, which can be used…
Wydruk około 3,20 €–3,91 € nettoWstępna wycena jednego wariantu
My saddle bag got in the way of a good place to mount my Garmin Varia RTL515 rear facing radar. This mount attaches to the seat mounts. My seat had 7mm bars and they were wide from edge to edge. This uses a single M4 nut and M4x20 bolt to…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have a Saddled Llama for you for diorama, or just for play. Very nice figures. It is suitable for coloring. My children absolutely love it :-). Important: If the figure…
Bracket to use Syncros accessories with PRO saddles. Every Syncros accessory mounts perfectly and holds strong. Originally it was designed for PRO Stealth saddle, but should fit every other PRO saddle. Printing settings: Filament: PETG,…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Reliably measures saddle height based on the point where the saddle is 80mm wide. I don't know much about bike fitting, and I've never been particularly good at measuring saddle height, so today when I saw Ronan McLaughlin share his home…
Print sideways (current rotation) with no supports. These mounts are designed to mount cables, devices, etc to a wall using nylon cable ties. Screw the mount to the wall through the middle, pass the strap through the slots on both sides,…
This Metric saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking…
Garmin Varia Radar - Bicycle Saddle Mount - also available for similar light versions The possibility of securing with zip ties - adapted for the original garmin holder Minimal supports Fast and easy print perfect snug fit Double…
A Molle hook to hang your platform from your saddle while climbing.
If you, or someone you know could benefit from a model/print like this (especially if you don't have access to a 3D printer), please reach out to us at [email protected] and we'll see what we can do. If you're enjoying models like this,…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Hidden Airtag Saddle Holder This is a handy holder that keeps your airtag hidden and safely attached to your bicycle. This is not a clip-on to make it harder to remove, instead the two halves are held together with four screws. The bottom…
Special thanks to @sugarballs for the Idea! Summary: There are various version of this angled (15°) shotgun shell holder / side saddle available. On the uploaded picture (Maverick 88) I used the 12G_5pcs_25mm_angled_velcro version. As…
Created by Aileen for a project of mine. Releasing as open source with permission of the author. Find her and more of her work here: Fiverr ArtStation - Aileen Z If you're enjoying models like this, please consider supporting us on…
Using this mount on my ERGON mtb saddle, also changed the mounting for SQLabs. Top and bottom pieces are now in one .3mf file. So download the one the suits you saddle. (I tested these on MTB saddles, so your mileage may vary.
Saddle for horse Schleich. Print from TPU filaments !!!!
Depending on orientation and printer capabilities this may require a small amount of sanding to ensure no “rough” edges (nothing even close to what it would take to cut a bridge line. Please drop a make or comment so this design can…
There are many design for this application but this is my version of Air Tag mount for bike. I wanted to make minimal and a little hidden one since it shall not be too obvious in my opinion. It utilizes the saddle rails to fix. (diameter…
This mount fits one Apple Airtag under the saddle directly over the clamp. Printed with black filament the device is hardly visible. Assembly: 2x M3x16 socket head screw, 2x M3 square nut. Saddle rails: c-c 43 mm, ø 7 mm This model is…
I acquired an aged street bike in questionable condition early this summer and I absolutely love it! It's green, it's made of steel, it's got two wheels and all the other bicycle stuff. Only thing left to complain was this torture device,…
Hide your Apple AirTag under your bike saddle. Out of sight, but the signal isn't blocked the way it can be when the tag is hidden inside a metal frame or tube. - Installs in minutes with just 3 tie-wraps (cable ties). No tools, no…
Pull out the original holder form the rubber an screw it together with my holder. You additional need 2x M4 Locknuts and 2x M4x15 screw and also a cutted off M5x17mm screw. Print with 100% infill.
A 3D scan of a bicycle saddle. Prints nicely in PLA with 0.6 nozzle size. Requires lots of support underneath and careful removal to not damage the rails.
YTGRRL Summer Update!!! NEW BBD MAGNUM MODEL, now with EXTRA CLEARANCE for your baggage. By popular demand, the shaft is now LONG. This WILL lead to breakage, but I am here to please. Garmin quarter turn mount for Fizik saddles with an…
I couldn't find any stl's for side saddles to fit my Winchester SXP Defender 12ga Shotgun, so I made one of my own by remixing a couple parts into one solid piece. Instead of sourcing the very obscure #6-48 screws that the SXP series…
Designed for use with Selle Italia SLR Boost TM Superflow (Small) specifically. The design utilises a slip in joint for the original Trek/Bontrager RT mount that comes with the light. There is also a provision to use an M5 Bolt for…
This is a Garmin Varia saddle mount using the Bontrager Blendr saddle mount system. No hardware is needed in the model. Allen screws are needed to mount to the saddle, otherwise the Garmin mount is built in. It should be printed with…
I've also created a GoPro compatible mount for the rails of a bike saddle in order to use it with my SIGMA BLAZE mount ( https://www.prusaprinters.org/prints/61869-sigma-blaze-mount-gopro-compatible ). The mount snaps on top of the rails…
Garmin mount to take advantage of Uniclip system on the saddle for attachment
I lowered my Martin guitar strings to about .068” above the fret as measured on the high E-string at the 12th fret. Low E-string was around .078”. It has a good playable tone without buzz. Sounds about as good as the bone saddle, so I…
A mount for a Garmin Varia radar to a saddle bag. I added a slot under the Garmin mount plate for a wire tie around the whole thing to make it extra secure. The downside is that you need longer screws than the ones that come with the…
This model is compatible with the lego system.
Useful if you need to mount two accessories onto one dovetail saddle onto your telescope. https://a360.co/3a6fCNv fusion 360 model
Used for hanging piping from rafters, joists, walls, etc. I needed this for hanging a section of PVC pipe from a ceiling joist to hang my filament spools. Worked like a charm. Instructions This Thing is fully parametric. Download the SCAD…
Printed with 3+ perimeters for strength (.4mm or .6mm). PETG is ideal for being robust. Remove receiver pins x 2, and replace with #10-32 x 1-¾" bolts using slim nyloc washers on the back. Good retention for 3" 00 shells and others of…
Modified the original to fit a slightly larger Garmin quarter-turn insert bought on Aliexpress. The original fits ~32mm diameter insert while this accepts up to ~34mm. The screw holes for the insert are slightly misaligned, although it…
Update : After using this in the 40C weather and putting in a few thousand km this summer, I made a few changes, to increase the strength of the main piece. Mine never broke, but I like this update a bit more. 7/10/2023 This model/remix…
Ruger Mark IV Barrel Shroud That Adds 1913 Picatinny Rail In The 6 O'clock Position For Adding Lights And Lasers.
This is a remix of an existing airtag bike saddle mount which, in its original configuration, did not fit my Selle Royale Essenza Plus saddle. I really simply modified the model to fit the spacing of the saddle, but also to even get the…
I needed a dropper compatible under saddle mount for my cateye rapid mini. I really liked my solution for Ergon Saddles , and copied the design over to the saddle rail interface from this solution . IMPORTANT NOTE : PETG will creep, I…
This is an almost completed saddle room for children's plays. The door and hatch for pets are not modeled. The owner of this stable is Veera, and if you want another name carved on the front wall, send a message. Edit: A blank version of…
What the Tether Keeper (TK) does : Prevents the tether loop around the tree from loosening when tether is no longer taut. How it works : Friction fit onto the vertical component of the tether that acts as a stopper for the tether thru…
Saddle bike mudguard fender Category: Sport & Outdoors
These Saddles (regular and short versions) replace the rollers in @GunplaMark 's The Ultimate Cereal Container Filament Drybox - Official Remix to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled…
Found this saddle rail mount for a rear facing GoPro, but the original rail dimensions didn't fit my saddles so redesigned the mount for my stock Haibike Selle Royal and WTB Volt rails (and added some fillets, centred the mount and gave…
A rear bike light mount specifically for the Cateye rear lights (specific models below) to mount under an Ergon QuickClick supported saddle. Ultralight and sturdy! Saddles Ergon saddles with Topeak's QuickClick mount. Locate a threaded…
I don't think the design needs much description. You can mount an AirTag under the orginal Specialized saddles with SWAT mount. I have it mounted with M5x10 screws.
Tested and working, however the fit is very tight. Ideally the cover is reduced slightly to allow an easier fit and removal. Requires 2× M5x15mm bottle cage bolts Printed in PLA on a Bambu Lab X1C
Simple, self-snap, airtag holder that you can secure with cable tie or 3mm bolt and nut.
This is a mount for Cateye rear light that attaches to saddle rails by zip ties. It's semi universal, it won't fit every saddle, but it should fit most of them. There are 4 versions for different saddle rail sweeps: 9°, 20°, 30° and 41°.…
The Flexi-Trex by Benchy4Life is awesome. Now this saddle lets your Lego figures ride on their own Flexi-Trex. Print Settings Prusa Mk2 Rafts: No Supports: Yes, if printing the whole saddle at once Resolution: 0.1 Infill: 20% Notes: I…
I designed a holder for my Samsung SmartTag to fit on my Ergon Saddle. The button on the Tag has to face down in the part “STag_unten” Use Supports Ad a piece of foam inside to stop ratteling.
Mount for a small battery led backlight under your bikes saddle
Another simple AirTag Holder for a bike saddle. You need 2 M4x8 + 2 M4 nuts to fix it. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 50% Filament: Smartfil ASA…
My neighbour wanted to have a 3D printed, brown saddle pad. So we took his Fizik saddle, remooved the pad, designed a fitting new one and glued it in place. So if you have a Fizik saddle too and want to print a new pad: Buy some good TPU…
Saddle bike mudguard fender new version (v4), with another design and more rigidity. Category: Sport & Outdoors
Phone holder for quick and easy measurement of bike saddle angle.
Specialized saddle swat Gopro mount For rear light or RADAR I print with PC-CF,over 1000km no problem. ->Mount print with PC-CF broken, about 3000km. Now using with eSUN ePA-CF. Not recomend ABS/ASA,broken with 250km.
Use m3 x 12 mm screws and nuts to mount the trackers. The designs are for the following saddles: Ergon Large (4 screws) Selle Royal Ariel (2 screws) Edit 8.6.2026: Upload new Selle Royal Ariel version, since the last might be too snug for…
This model is for 1/64 scale tractors and the tank goes on the side of the tracotr and it can be used for hold nitrogen in real life for when you are spraying or planting. This is perfect for farm diaramas with high detail and unique…
Replaces the drive side pedal to allow precise measurement of saddle height from the centerline of the pedal spindle. Note! This model is larger than the one in the photos. After printing that prototype I realized it was too small to be…
Apple AirTag mount specifically for the Ergon QuickClick supported saddle. Saddles Ergon saddles with Topeak's QuickClick mount. Locate a threaded hole under the saddle to confirm. Installation Do NOT over tighten bolt and risk cracking…
Garmin Varia Mount for Prologo Scratch M5 saddle. There are two variations: with D4 holes for mounting directly to the saddle with D7 holes to insert rubber bushings for vibration dampening
15mm copper pipe clamp saddle. PETG 0.20mm 25% infill. Created with FreeCAD.
A simple saddle - prints on its side with no support needed. I used PETG at .3mm layer height and four perimeters so they'd print solid without infill. They were originally designed to hold towels and clothes in our camper and worked…
These clamp saddles fit Bessey, Gross Stabil, and Jet parallel clamps. They may fit other makes but I have not verified. My intent was to provide reference points for flat panel glue-ups and provide clearance to scrape glue while still in…
Being short and unable to mount a varia to my bike with a saddle bag attached I decided to create the following solution. This uses hardware included in the Varia and topeak kit. this might fit other topeak bags if the mounting system is…
Designed to clip on rail from below first, then other side from top so they counter act and less likely to pop off; a sort of clip twist. Light can be clipped in before or after mounting to saddle. Should clamp opening should point…
Attachment point for the webbing on a Method 2 saddle for the xwing platform from Latitude. Printed in [email protected] .6noz - held the weight well on over a dozen climbs.
Small but solid 3D square with ruler for metalworking and woodworking, especially convenient for square steel profiles. Arms are 60 mm long. Made for marking cuts on steel to weld. Print with at least 4 walls for sturdiness, and 20% infill.
It was designed to attach to the underside of a desk. There are lugs that fit the bottom screw holes of the switch. It also has hooks to clip in the cables to keep it somewhat tidy. If you have a 200x200 build plate like me then rotate it…
Print three of this and your problem is gone. All the cyclists have a common problem such that their bikes handles are scarred when you turn the bikes upside down and work on wheels detached or something other maintenance. The situation…
Wanted a prusik tender but couldn't find any files out there so I tried out some 3D modeling, it works great!
This is intended to be put on a tripod and hold your rifle for more stable shooting. I worked on this a while back and just remembered I hadn't put it up here. It needs some work, but does work as is. A thumbscrew for tightening the…
This Saddle replaces the rollers in @Extrutim 's Drybox | Cheap Filament Storage Box | Polydryer Compatible Dry Box to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled filament due to MMU ejection…
Found most of the airtag saddle mounts didn't fit for me, my saddle rails were not 44mm apart but rather 42mm and thus needed to be slightly different than what exists. Uses 2 socket-head cap screws (M3) and 2 M3 hex nuts to mount.
MagicShine Seeme Saddle Mount - ciclismo, luz, soporte sillín carbono bicicleta. Seeme 200
Saddlebag mount for Garmin Varia Radar lamp. It can be mounted on a saddlebag and extra secured by a cable tie. To secure it even more and make it less wobbly I designed a stabilizer which is secured at the back with a cable tie and…
I designed the model to adapt a standard bicycle rear light to a Woom 4 bike.. The new models have a mount under the saddle, which I used for this purpose. There are two versions with different angles. As an option, I generated the rod in…
Please review, it was designed for someone else i cannot test it. 2025-04-10/No setback model now available no support PA6-CF 3rd iteration
Garmin quarter turn mount for Shimano PRO saddles. Attaches to the back of the saddle via the OEM attachment points. This was printed on PLA for testing. At some point I'll print it in ASA. Model is based off my Garmin Varia Clip for…
Saddle rail mount for the new Wahoo Trakcr Radar. Attaches to the saddle rails with small zip-ties. Print with organic supports either on build only or for support enforces only. I printed it in PC Blend and .10 layer height on my Prusa…
Pipe clamp to fix pipes to walls. :) Main parameter is pipe_d. screw_xxx parameters determing what type of screw you use. Currently set as a 8 gauge wood screw. (You can change it to a pan head by setting screw_trans to 0) support_d…
Western Movies - Blazing Saddles - 1974 3D printable model.
I really liked my solution for Ergon Saddles , and copied the design over to the saddle rail interface from this solution BUT a design that wouldn't interfere with my saddle position being pushed totally forward like this one would . So,…
This is a bullet saddle for a 6.5 Creedmoor rifle and it holds 6 rounds. Could make is as long or short if need be. (Find 3MF attached)
Replacement tie bar for an Ukulele. 42mm distance between outer string holes. Includes two saddles, one 8 mm one 6.5 mm height. Print in ABS for strength, use brim and 4 perimeters on saddle Category: Music
This is a similar concept to @repe 's Airtag holder , but designed for Chipolo One finders. I've attached two lid files, one for bicycle saddles with round steel rails and one for saddles with tall carbon rails. Both are held in place by…
Not printed and tested yet but the dimensions should all be good. I am planning on using a small velcro strap or maybe a short voile strap to keep the tube and compressed air cartridge in there. Category: Sport & Outdoors
Some Fizik saddles have a clip in system. This mini-mudguard clips into this receptor. As a mudguard this is of course not 100%, but it protects your behind from getting splashed with dirt. It has a small shield to protect the gap between…
I've printed these in PLA at 0.30mm without issues. I typically print between 10-30 of them all at once, 1mm apart, with a brim. I'm using these in my eurorack modular synth with M3x8mm flat head screws to hold cables in place. Just note…
Remix of IBI Productions AirTag bike saddle mount
This is a saddle made for model paint mixers like Robart or nail polish shakers. The rubber band on these mixers are terrible and break frequently. This saddle holds most dropper bottle snugly while allowing them to easily snap in and…
This is a U-bolt saddle to give more stability to the popular Soshine Solar Panel mounting solution from Voltaic Enclosures found here: https://www.printables.com/model/223030-bracket-mount-for-soshine-6w-5v-usb-solar-panel Since the…
The Saddle Bag Vase takes cues from old-time saddle bags and worn-in leather satchels, blending classic frontier style with a modern twist. Its textured surface suggests the natural creases and folds of real leather, while the slim cord…
