Wyniki wyszukiwania: scx

Sortowanie

449 modeli

P
PrintablesSoarpix

SCX24 JEEP Wrangler body

SCX24 JEEP Wrangler body Category: R/C Vehicles

Pobrania
1549
Polubienia
150
Ocena
5
P
Printablesdaver18qc

1/10 Scale Bumper Jack SCX10

* UPDATE: I made V2 with looser tolerances, V1 was a bit tight and needed too much sanding to fit. * UPDATE2: V3 further enhances strenght, more space for the foot bolt too. Length : 127mm Base : 17mm X 17mm Should be pretty perfect scale…

Pobrania
1303
Polubienia
313
Ocena
4,88
P
PrintablesN0_Lan

Scx24 Lcg chassis

-Check out my new design here - This is a work in progress scx24 chassis. It has a slight angled skid and fully customizable skid plate angle to allow better break over angle. There is a version for all wheelbases ( I have not tested the…

Pobrania
1186
Polubienia
170
Ocena
5
P
Printablesprintable

Axial SCX24 AX24 Driveshaft (updated)

Driveshaft for 1/24 scale crawler axial SCX24 and Probably AX24. First pass so still a little rough but practical. Designed this so I could flip my motor/transmission around for more weight forward. Needed custom driveshaft lengths. I…

Pobrania
1096
Polubienia
102
Ocena
5
P
PrintablesDepep1

Tremor Chassis V2 for Scx24

This is V2 of my Tremor chassis for the SCX24 that I designed. It is a low CG-style chassis / Comp chassis. *If you are interested in selling 3D prints of this model please contact me* There are 2 versions to this chassis. A flat skid…

Pobrania
1036
Polubienia
175
Ocena
4,75
P
Printablespolymech3D

Armadillo Off-Road Truck 1/10 body for SCX10 III

Armadillo off-road truck body for SCX10 III Hard body that has been designed to fit the SCX10 III Base Camp builder's kit chassis (AXI03011). The body might fit other 313mm chassis as well but the mounts need to modified accordingly.…

Pobrania
832
Polubienia
244
Ocena
5
P
Printables1_24Buddy

SCX24 Buggy

This is a work in progress scx24 chassis I have been working on for myself but have decided to list for free. It may not work with all stock or aftermarket parts, but you may be able to make alternative parts work. This was designed to…

Pobrania
807
Polubienia
165
Ocena
4,67
P
PrintablesJames Spadaro

SCX24 Trailer

This is a little utility trailer for an SCX24. I sized it to be wide enough to fit an scx24 between the fenders even with the mill stone wheel wideners. All the parts can be printed without support, except the inner axles. I have them put…

Pobrania
806
Polubienia
169
Ocena
5
P
PrintablesLiviu3D

SCX24 Stand

Update: i flipped the top pins so the axles sit right.

Pobrania
787
Polubienia
103
Ocena
5
P
PrintablesReese

scx24 flex plates

this model will lower your scx24 lower to the ground and improve the center of gravity causing less rollovers when crawling and climbing steep obstacles. i suggest you make them a little bit thicker in your slicer for better performance,…

Pobrania
756
Polubienia
89
Ocena
5
P
Printablesxboxsniper22

SCX10 Pro Frame

It's very close to the original and can be used as a template to create other parts.

Pobrania
745
Polubienia
62
Ocena
0
P
PrintablesRobert Posey

Scx10 chassis

Found this over at 3D warehouse, looks to be made by machfud. E. https://3dwarehouse.sketchup.com/model/4daea5e0-66f1-4aa2-acda-0a4cdee04284/SCX-10 Thought I would share it here as it is so useful to mock up parts. If the scale is wrong,…

Pobrania
677
Polubienia
61
Ocena
0
P
PrintablesJosh

SCX24 Flex Link Mod

This is the best mod for your SCX24 for only a few cents of filament! Gives your rig around 65% more flex! This is probably my most favorite mod I have ever made. To install you will want to remove your shocks from the towers and put them…

Pobrania
627
Polubienia
58
Ocena
5
P
PrintablesN3EIL

SCX24 Gladiator Rock Sliders

Mirror Object to fit both sides of your SCX24 Gladiator.

Pobrania
619
Polubienia
62
Ocena
5
P
Printablesmce076

Axial SCX10 Skid Plate High Clearance

This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to…

Pobrania
580
Polubienia
53
Ocena
0
P
PrintablesSilverBullet126

Axial SCX6 - Axle Stands

Axial SCX6 axle stands; separated by front and rear (since they're different). My goal was to have the strength to hold up a ~28 lbs truck, but use as little filament as possible. You'll need to complete, two rear verticals (they're…

Pobrania
575
Polubienia
34
Ocena
4,57
P
PrintablesBrad S

scx24 wall mount

Update: Verified that the v1 remote fits. This is my take on a wall mount for the scx24. I wanted something that I could use to get my scx24 off the table and out of the way. I also wanted something that would hold the controller. I…

Pobrania
568
Polubienia
81
Ocena
5
P
PrintablesDepep1

RBX24 (SCX24 Rock Bouncer)

Here's V2 of the RBX24, Rock Bouncer 24th scale Chassis for the SCX24. Based on 2 versions of the IRL Revolution 2.0 chassis. https://www.wideopendesign.com/revolution-2-0-rock-crawler-chassis…

Pobrania
554
Polubienia
86
Ocena
0
P
PrintablesDerakCZ

lcg scx24 chassis

i made this chassis by myself to lower the center of gravity on my scx24 jeep gladiator , its lengt is universal so it will fit every scx24 everything is included in the pack , including rock sliders battery and esc mount are merged into…

Pobrania
512
Polubienia
70
Ocena
5
P
Printablescaribou

Axial SCX24 High Clearance Suspension Links - Basecamp/C10/JLU/Bronco

Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…

Pobrania
507
Polubienia
67
Ocena
3
P
PrintablesForker45

SCX24 Wide Beadlock Wheels

Background This print file is an extensively modified remix of Arkon Lincoln SCX24 Beadlock Wide Rims on Thingiverse by CheapAZHobbies I used PrusaSlicer to scale, remove material, & correct the geometry so it could be used on my SCX24…

Pobrania
475
Polubienia
71
Ocena
5
P
PrintablesDiscoJon

SCX30 Case

Printing Case and Lid: PETG or PLA recommended 3 Perimeters .20 Layer Height 10% Grid or Rectangular infill Inserts: TPU or other flex recommended 0 top and bottom layer 10% gyroid infill 2 perimeters 2-Feb-2026 Added Case with Handle…

Pobrania
471
Polubienia
64
Ocena
4
P
PrintablesChris

SCX24 - Axle Skid Plate

To help protect your SCX24 Axle housings while out Crawling around your backyard or your neighborhood. The mount will fit Stock SCX24 Axle diff covers, and will also fit Injora diff covers on Stock Axles. Mounting holes on both ends of…

Pobrania
468
Polubienia
98
Ocena
5
P
Printablesahead_RC

SCX10 iii Gladiator Flatbed

Want an overland style SCX10 iii Gladiator? You can now build one! The flat bed originally designed and printed for our SCX10 iii Gladiator Aussie Style Overland build . The flatbed comes with 2 different versions of an oversized, extra…

Pobrania
463
Polubienia
95
Ocena
5
P
PrintablesRevellio

Custom Crawler Chassis based on SCX10 Carbon Rails

General description I was looking for a simple, flexible and affordable chassis for my many scale crawler projects. Nothing was optimal and I developed something myself. The chassis is based on the TFL-Racing carbon rails for the SCX10…

Pobrania
447
Polubienia
71
Ocena
0
P
PrintablesChris

SCX24 - AX24 - Steering Link with Included Drag Link

Axial SCX24 and AX24 compatible stock width Steering Link with included Drag Link I was wanting a color matched Steering and Drag link for my Orange AX24, a few moments later I had these printing for my enjoyment, in the color of my…

Pobrania
412
Polubienia
59
Ocena
4
P
PrintablesRevellio

AXIAL SCX10 I & II - Chassis Parts / Update 22.10.2026 - New Body Mounts

Description General I have collected all SCX10 I & II parts i published on Printables so far. The chassis rails and skid of the SCX10 I are absolutely identical to those of the SCX10 II. So, many parts are suitable for both chassis.…

Pobrania
398
Polubienia
51
Ocena
0
P
Printableshumming

SCX24 Front and Rear Axle Limiting Strap Mounts

Simple limiting strap mounts for the front and rear axles on the SCX24. Front axle is for axles upgraded to an ES08MA II steering servo with one of the typical kits. I printed in PETG for the toughness. ABS would also be an excellent…

Pobrania
394
Polubienia
36
Ocena
5
P
PrintablesDepep1

RBX24 (Scx24 Rock Bouncer Chassis)

Fixed a small issue with one of the roofs. Here's V2 of the RBX24, Rock Bouncer 24th scale Chassis for the SCX24. Based on 2 versions of the IRL Revolution 2.0 chassis. https://www.wideopendesign.com/revolution-2-0-rock-crawler-chassis…

Pobrania
391
Polubienia
107
Ocena
5
P
PrintablesDecentFarts

TRX4M Modular Track Part 11: SCX24 Customizable

Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…

Pobrania
389
Polubienia
74
Ocena
5
P
Printablesxxqpxx

scx24 skid / trans mount

My transmission was binding on the original model. I did a quick boolean in Blender to make it work. Category: R/C Vehicles

Pobrania
386
Polubienia
29
Ocena
0
P
PrintablesYetiEngineering

TruckNut Kit for Axial SCX24

TruckNut kit for Axial SCX24. The kit is designed for the Axial SCX24 C10 but should work with other body styles, let me know in the comments. It is designed to be a fun joke to install. The trucknut holder piece should be glued into the…

Pobrania
384
Polubienia
49
Ocena
0
P
PrintablesDepep1

RBX24 (Rock Bouncer SCX24 Model) V1

DEPRECIATED Here is version 2: https://www.printables.com/model/279013-rbx24-scx24-rock-bouncer Here is version 1 of my RBX24, Rock Bouncer chassis for the scx24. It's based on the IRL Revolution 2.0 chassis.…

Pobrania
371
Polubienia
55
Ocena
0
P
PrintablesDepep1

Tremor Chassis Scx24

DEPRECIATED UPDATED MODEL: https://www.printables.com/model/484851-tremor-chassis-v2-for-scx24 This is a chassis for the SCX24 that I designed and 3D printed. It is a low CG-style chassis / Comp chassis. I designed this with a brushed…

Pobrania
361
Polubienia
82
Ocena
5
P
PrintablesRMTCTRL

Cantilever Suspension for Axial SCX10

I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on you Axial SCX-10. My Main goal was to use the stock shocks to keep the cost down. You will need to print the parts and purchase a…

Pobrania
350
Polubienia
95
Ocena
0
P
PrintablesYetiEngineering

SCX24 Low CG Battery Tray V1

Low center of gravity (CG) battery tray designed for the Axial SCX24 R/C rock crawler. The battery tray is designed to fit the Chevrolet C10 body style but should fit other bodies. Please tell me in the comments what bodies it fits. Holes…

Pobrania
347
Polubienia
59
Ocena
5
P
PrintablesZanthrax

Hinged body mount for Axial SCX10III Early Bronco

Makes swapping batteries a lot simpler by keeping the body connected to the chassis. Uses the stock mounting points. Replaces the rear bumper mount and the mounting bracket connected to the roll cage on the body. 2 additional M3 holes are…

Pobrania
346
Polubienia
30
Ocena
5
P
PrintablesLarry Kalis

Scx24 servo mount Injora 4-link

This is a custom servo mount remixed to fit a Injora 4-link high clearance links. Print with infill 100% or 99 bottom layers. Also orientate so the part so printing is upside down for clean fit with diff. link to servo i used…

Pobrania
342
Polubienia
29
Ocena
0
P
PrintablesChris

SCX24 - Crawler Course Gate Set And Stackable Cones

Here is a set of Crawler Course Gates that can be used in your scale RC crawler course builds. The gates included in this set number Gate 1, through Gate 15. Each of the numbered course gates, are a pair. Meaning each pair includes the…

Pobrania
338
Polubienia
66
Ocena
0
P
PrintablesDennis Howse

SCX24 Comanche

fixed the thickness on the hood and roof for resin printing. Category: R/C Vehicles

Pobrania
329
Polubienia
46
Ocena
5
P
PrintablesRandyLahey

Durable SCX24 Velcro Body Mount Upgrade

This is upgrade part to replace the pins on SCX24 trucks with a flat plate that velcro or magnets can be attached to. This was inspired by the mounts the newer bronco model. There are multiple adjustment points to allow more flexibility…

Pobrania
324
Polubienia
26
Ocena
5
P
PrintablesDecentFarts

TRX4m Modular Track Part 11.A SCX24

Took the amazing design from Ed which was then remixed by Dieter Spillmann and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people…

Pobrania
322
Polubienia
68
Ocena
5
P
PrintablesBrainanator

SCX10 Skid Plate. High Clearance, Flat Bottom

Center skid plate for the Axial SCX10 RC crawler. This gives you a little more ground clearance to prevent getting hung up. This skid plate DOES affect link geometry slightly. There are 2 version, once for the stock links using Axial…

Pobrania
310
Polubienia
17
Ocena
0
P
PrintablesRunfrcover

SCX24 Chassis Stand

Chassis stand for the Axial SCX24 crawlers. One piece with tabs to grip the skid. Built for my SWB Deadbolt but should work with all models. STD version is symmetrical for all SCX24 models. Deadbolt version has the back edge extended to…

Pobrania
306
Polubienia
21
Ocena
5
P
PrintablesDecentFarts

TRX4M Modular Track Part 12: SCX24 Customizable

Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…

Pobrania
306
Polubienia
61
Ocena
5
P
PrintablesRubber Duck

Finger Turn For Traxxas or SCX24 Remote

I have a Traxxas TRX4m, I drove it so much that I got tired of using two hands. So I went into Fusion 360 and fixed my problem. I would recommend TPU but PLA or something like that will work. I recommend printing the nob at 100% infill…

Pobrania
303
Polubienia
47
Ocena
4,5
P
PrintablesChris

SCX24 - Snow Plow Mount for Emax Servos with 3mm LED Mounts

SCX24 - Snow Plow Mount with 3mm LED Mounts Here is snow plow mount that will fit an EMax ES08MAII or similar servo. There are two versions of the snow plow mount in this pack. One version with 3mm LED mounts on the bumper. The second…

Pobrania
295
Polubienia
64
Ocena
5
P
PrintablesDerakCZ

Scx24 competitiom body

this body is made to fit on the custom lcg chassis by N0_Lan ( the betty version) in the files is inlcuded fuel tank for mounting a magnet also there are fender that i made but they are not included in the picture ! happy printing , in…

Pobrania
289
Polubienia
43
Ocena
0

SCX24 Jeep Wrangler Gladiator Scorpion Bumper For EcoPower_E-Max Upgraded Servo

SCX24 Jeep Wrangler Gladiator Scorpion Bumper For EcoPower_E-Max Upgraded Servo

Pobrania
289
Polubienia
31
Ocena
5
P
PrintablesDasumocat

Axial SCX10ii 1/10 scale Jeep front bumper

I found this on Cults and printed it using the SLS1S. It turned out really well except that the mounting pegs are just a few mm too narrow. I can still manage to mount it on my SCX10 Jeep but it gets tight. I also created a winch mounting…

Pobrania
285
Polubienia
42
Ocena
0
P
PrintablesBen

Axial SCX24 Lexus GX470 / Deadbolt 4 Link Conversion + High Clearance Links

High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…

Pobrania
281
Polubienia
25
Ocena
0
P
PrintablesForker45

SCX24 Bronco Tow Hitch & Receiver

I designed this receiver hitch to be super glued onto the bottom of the SCX24 Bronco rear bumper. The drop hitch is removable for clearance when you aren't towing. The receiver profile matches the bumper as much as possible to reduce…

Pobrania
281
Polubienia
43
Ocena
5
P

1:24 1980s Safari Porsche RC Body SCX24

something messed up when exporting every time and that there are some lines, I just filled them with super glue and sanded them smooth. This file fits the wheelbase of the axial scx24 C10

Pobrania
280
Polubienia
35
Ocena
0

SCX24 RC BODY DEUCE IN A HALF MILITARY TRUCK

Online 3D Printing Instant Quote - JLC3DP great place to have your RC body to be printed for cheap and they use resin with the printing so everything will show it detail. THIS IS A OPTION IF YOU DON'T HAVE A 3D PRINTER

Pobrania
279
Polubienia
31
Ocena
0
P
PrintablesRobert Posey

SCX10 Hotrod body

This 32? Ford cab is designed by Ossum (you can find his design in the remix area.) I Basicaly squashed it down 20% to make it look more rat rod like. And some other adjustments to fit it on to a SCX10 frame. His work is amazing! Some day…

Pobrania
276
Polubienia
38
Ocena
0
P
PrintablesRemy

Axial SCX24 Micro Crawler Stand

Chassis stand for the Axial SCX24 micro crawlers Designed fairly generic so it should fit most crawlers.

Pobrania
275
Polubienia
39
Ocena
5
P
PrintablesNicholas Oakman

SCX24 truck body's

bodys made for scx24

Pobrania
261
Polubienia
29
Ocena
0
P
PrintablesChris

SCX24 - Crawler Course Gate - Start/Finish Gates

Start/Finish gates intended to be used with the SCX24 - Cone To finish off the Crawler Course you will surely need Start/Finish Line gates. Multi-Color Gates can be achieved by a simple filament swap to achieve the Black-White checked…

Pobrania
261
Polubienia
60
Ocena
5
P
PrintablesTimothy Cox

SCX 24 Teeter Totter

I remixed aiye's 1/18th scale Teeter totter for the SCX24 rock crawlers I scaled everything down to 93.55% (mainly to fit on my Flash forge adventure 5m) which turned out to fit the 24th scale perfectly. i also designed a clip to snap the…

Pobrania
259
Polubienia
38
Ocena
5
P
Printablescaribou

Axial SCX24 High Clearance Suspension Links - Gladiator/Power Wagon

Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the SEMA links on Cults. V1 and V2 have identical footprints/outlines – the only…

Pobrania
259
Polubienia
28
Ocena
5
P
PrintablesDepep1

SCX24 Suspension Link Pivotball With Flat End

I had an issue where my links kept falling off the pivot ball so I took some inspiration from my injora shocks and added a flat side that keeps the links from falling off. Category: R/C Vehicles

Pobrania
259
Polubienia
47
Ocena
5
P
Printablescaribou

Axial SCX24 High Clearance Suspension Links - Deadbolt / Betty

I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…

Pobrania
253
Polubienia
32
Ocena
0
P
PrintablesJimjo

SCX10 III - High Clearance Bumper

High Clearance front bumper compatible with the Axial SCX10 III Basecamp. Please note the bumper is NOT compatible with the JLU body or other bodys that use the “clipless” mounting system. Provides much improved approach angle vs the…

Pobrania
253
Polubienia
24
Ocena
0
P
PrintablesDecentFarts

TRX4M Modular Track Part 1: SCX24 Customizable

Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…

Pobrania
248
Polubienia
75
Ocena
5
P
PrintablesPricFlair

SCX30 Real beadlock wheels for stock size (18mm) tires

Inner Ring has been updated to make mounting substantially easier. Also the wheels are (and always were) compatible with Injora brass inner beadlock rings. Not to be confused with their inner wheel weights. [Rear wheel half has been…

Pobrania
247
Polubienia
34
Ocena
0
P
Printableshumming

SCX24 Tremor V2 Remix: Badger

I wanted to build a version of the tremor that had more clearance for shocks to be vertical without binding, and @Depep1 was kind enough to include the fusion files in his original. 2/29/2024 update - Added Step file as well as solidworks…

Pobrania
245
Polubienia
53
Ocena
5
P
PrintablesJan Vávra

SCX24 body Humvee

Narazil jsem při stavbě scx24 z tištěných dílů na krásnou kastli. Je jednoduchá na tisk a zajimavá. Byla by škoda jí zde nepřidat.

Pobrania
244
Polubienia
46
Ocena
5
P
PrintablesChris

SCX24 or AX24 Shock Preload Spacers

A simple set of preload spacers that will fit the stock Shocks on your SCX24 and AX24 rock crawlers. These can be used to adjust the amount preload on your shocks, therefore adjusting ride height of your crawler itself. When used in the…

Pobrania
242
Polubienia
40
Ocena
5
P
PrintablesChris

SCX24 - Front Bumper - Remix

SCX24 Front Bumper - Remix A remix of a great model! The mount has been reworked and lowered to keep with the original height of the stock bumper and make it a bit easier to print. There are 3mm holes for bumper marker lights, to bring…

Pobrania
240
Polubienia
45
Ocena
5
P

Link Riser ar44-45-45p axial scx 2-3

Link Riser ar44-45-45p axial scx 2-3 printed in pla-cf.

Pobrania
236
Polubienia
9
Ocena
0
P
PrintablesBrad S

SCX24 Brushless motor mount

This is a brushless motor mount for the scx24. It was designed for the Furitek Micro Komodo motor. The micro komodo motor utilizes a 9mm spacing between the mounting holes. It potentially could work for any brushless motor that utilizes…

Pobrania
235
Polubienia
21
Ocena
0
P
PrintablesDasumocat

Axial SCX-10 Jeep Wrangler Rhino Rack roof rack

I couldn't find a 1/10 scale roof rack that I liked. So I measured my real Pioneer Rhino Rack roof rack on my Jeep and scaled it down to 1/10. I decided to make the mounts magnetic so I wouldn't have to drill into the body of my Jeep…

Pobrania
234
Polubienia
30
Ocena
0
P
PrintablesSilverBullet126

SCX6 - SkyRC GSM020 GPS - Water Resistant Case

For those you want to track distance, but not be worried about getting your SkyRC GPS wet this is the case for you. I have submerged the case for about 5-min and only experienced very minor water seepage. I wouldn't call this water proof,…

Pobrania
232
Polubienia
22
Ocena
5
P
PrintablesNetrecov

scx24 low cg batt tray with esc shelf

scx24 low cg batt tray with esc shelf for use with furitek motor

Pobrania
230
Polubienia
34
Ocena
0
P
PrintablesCosmos Darkstar

SCX10 II comp rock sliders

These sliders were perfect but they were too wide for the comp truck body so I made them smaller.

Pobrania
228
Polubienia
14
Ocena
0
P
PrintablesNicksk3

SCX24 magnetic body mount

SCX24 magnetic body mount. designed for the bronco, might work on other body's V2 is installed on the photo's added 2 spacers on the side for alignment. V1 can be mounted lower if u move your esc/rx magnets are 10mm

Pobrania
222
Polubienia
60
Ocena
0
P
Printablesdeft0nes79

Scx24 Jtframe chassis rails

Custom chassis rails designed for scx24 . all mounting holes are slotted to allow fully customizable set up and tuning

Pobrania
217
Polubienia
40
Ocena
0
P
PrintablesPricFlair

SCX30 Rear Links +5mm length with balljoints

Here are some basic rear links for the SCX30 to increase your wheelbase by 5mm. These probably wont fit your stock bodies without modification obviously, but can work will on custom and fenderless rear bodies like the one shown (coming…

Pobrania
216
Polubienia
19
Ocena
5
P
Printablestaeraeyttaejae

Axial SCX10II front chassis front bumper mount

Whipped up a 40mm width mount for the nice front bumper farmersmark has made: https://www.thingiverse.com/thing:3531283 fits like a glove. I was lazy and you have to drill a hole through the smaller through-hole to attach the original…

Pobrania
215
Polubienia
15
Ocena
0
P
PrintablesNotDFace

SCX24 Mini Monster Truck Chassis

Wanted a Mini Monster based on the SCX24. The chassis is designed to use the same screw set as the SCX24 for mounting to the motor base plate, and I used M3 screws for everything else. I used an extended suspension arm kit to make it all…

Pobrania
212
Polubienia
66
Ocena
0

SCX10.2 to RC4WD Xtra Cab body mounts

Hey everyone, Here's some side trays/body mounts to install a RC4WD Xtra Cab body onto an Axial SCX10.2 chassis. Just slide some basic M3 nuts into the slots and you're ready to drop the body on. (You can either run the bolts like studs…

Pobrania
209
Polubienia
21
Ocena
0
P
PrintablesIvan Stepanenko

Axial SCX24 Bronco ROCKSLIDER

Details need to be mirrored.

Pobrania
208
Polubienia
44
Ocena
5
P
PrintablesTeamK

Axial Capra and SCX10.3 - Mini-T Spring Perches

If you want to use Losi Mini-T springs on your Capra or SCX10.3 shocks, these spring perches will allow you to make the conversion. The lower perch is designed to allow popping it off over the shock shaft without removing the rod end, so…

Pobrania
204
Polubienia
20
Ocena
0
P
PrintablesMuddledRemarks

SCX24 1/24 Scale RC Body - Bus Design

This is a custom bus design for my SCX24. It was made specifically for my rig, so it's not to scale and will probably not fit a stock SCX24. Enjoy! I printed mine with 2 perimeters, 3 top layers, 0 bottom layers, 0.75 line width,…

Pobrania
203
Polubienia
49
Ocena
0
P
PrintablesFrogmats

SCX6 Axle Stand

You will need (4) 3mm flat head screws 20mm long to assemble stand together. I printed with 15% infill using PETG and it seems strong enough to hold SCX6.

Pobrania
202
Polubienia
8
Ocena
5
P
PrintablesDecentFarts

TRX4M Modular Track Part 2: SCX24 Customizable

Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…

Pobrania
201
Polubienia
47
Ocena
0
P
PrintablesRebelScum

Scx30 Wheel Weights

Scx30 Wheel Weights. No modifications required to the stock Scx30. Prints quickly and without supports. If printed with PLA, each wheel weights approximately 1.3 grams. Denser filaments might be better for making them heavier if needed.

Pobrania
199
Polubienia
25
Ocena
0
P
PrintablesZanthrax

Axial SCX6 Panhard brace

The panhard bar on the SCX6 is mounted single shear on both ends. No bueno. This brace reinforces the mount on the axle. Uses the stock hardware, no additional parts needed. To reinforce the chassis mount I recommend a metal shock tower…

Pobrania
195
Polubienia
21
Ocena
4
P

Axial SCX10 III Portal AR45P Axelstand Rc Crawler

Axelstand for your rc crawler more specific Axial SCX10 III portal axels AR45P (AX1232022, AX232023). Can be used on front and back. Hardware 2x M3 x 8mm Cup screw 2x M3 nut For more info in swedish Buttyboys.se…

Pobrania
194
Polubienia
26
Ocena
5
P
PrintablesDecentFarts

TRX4M Modular Track Part 9: SCX24 Customizable

Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…

Pobrania
192
Polubienia
54
Ocena
0
P
PrintablesSilverBullet126

Axial SCX6 - Battery Mount Extenders

Axial SCX6 battery extenders for the Gens Ace Bashing Pro 157mm 3S (8000mah and 6700mah) packs and the XL version for Gens Ace Bashing Pro 178mm (15000mah). New - Looking to get these tray extenders, but don't have a printer? Checkout my…

Pobrania
191
Polubienia
11
Ocena
5
P
PrintablesShozoku Sagara

SCX24 Gladiator Rock Sliders

The original had the best scale look out of all that I found, but just wanted to add something a little bit more decorative.

Pobrania
189
Polubienia
29
Ocena
0
P
PrintablesGumo Design

SCX24 Brushless Conversion for 1908 motor

I printed these with CFPA filament. Including the gears, they work pretty well so far. I am using FURITEK LIZARD PRO and “MZ1908D” motor from Ali.

Pobrania
189
Polubienia
41
Ocena
0
P
PrintablesChris

SCX24 - Cone with Flag Mount

SCX24 Cone with Flag Mount A simple traffic cone with a hole in the top to support a "Flag" of some type. I needed a way to put in some flags around my crawler course. I liked the idea of having a traffic style of cone that would hold the…

Pobrania
187
Polubienia
48
Ocena
5
P
PrintablesCfrazier31

SCX24 Trailer for Mini+

I currently have the Prusa Mini+. After downloading the trailer bed, I found out that the trailer bed was too large to print on the printer. I split the trailer bed in 2 pieces and created rails to act as a frame for the bed to be 1 piece…

Pobrania
186
Polubienia
75
Ocena
0
P
PrintablesDecentFarts

TRX4M Modular Track Part 4: SCX24 Customizable

4/24/24: Added two versions of a overlapping connector for changing the track width using the original models. Original: Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the…

Pobrania
185
Polubienia
38
Ocena
0
P
Printables7Point4

SCX24 Jeep Tire Mount

Tire mounts using a 3mm machine screw. Self-tapping. I used a 3mm x 5mm machine screw

Pobrania
184
Polubienia
29
Ocena
0
P
Printableszzubnik

SCX24 Side Plate

Side plates for the Axial SCX24 crawlers. These are similar in size to the Injora design but designed to take the materials into account. I have used these to mount the battery and radio lower for a better COG. You will need to clone and…

Pobrania
182
Polubienia
17
Ocena
5
P
Printablesbricoletout

Bumper AXIAL SCX10 II (2) (AX31392 and AX31393 substitute)

Front : New version stronger and looking more like the orginal one. But still very short ! Rear : just the same with reinforcement. Print Settings Printer: anet A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Notes: Printed on my…

Pobrania
181
Polubienia
24
Ocena
5