94 modeli
A working model of ASD1660 Toolholder from PeWe-Tools. Created for Holding a Dial Indicator. This will fit in a Multifix AS16. See here: https://www.prusaprinters.org/prints/134855-holder-for-dial-indicator I recommend printing all the…
This is a slim compact case for a SSD1306 I2C 0.96" OLED Display Screen. The case was designed based on the measurements of this model I ordered from AliExpress. Other boards do vary slightly, and the model's clearances are very tight. A…
Display housing for SSD1306/SSH1106 1.3" OLED display and Wemos D1 Mini. There are many use cases like Octoprint Display, Tasmota or ESP Easy to name just a few - you may need to follow the respective guides and instructions online. I use…
I changed the Original Parts to fix some “issues” and create a new housing for my Octoprint Monitor ;) Changes: -rounded the houding edges for a smoother look -create a bezel for a 0.96" OLED -make the bezel rotatable for “Tate Mode”…
Made a project box for the ESP32 WROOM (although most ESP32 boards have the same form factor), with a lid for the 0.96" OLED screen. It houses multiple access points for wiring, and a small 10mm slot for the touch sensors. I use a folded…
Simple design of the famous SSD1306 0,96" OLED display for your assemblies.
case for the SSD1306 OLED display. after inserting the display, heat and press the 4 pins to lock it, or glue it use supports only from the print bed for the screw holes post a make!
This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…
Just a little protection of LCD display. The display is just clipsed on the box Category: DIY
Got my inspiration for this from this reddit post A simple box for and SDD1306 OLED display, hooked up to an Arduino nano, with one WS2812 color LED (neoPixel). The cover on the back simply slides in, no screws or glue needed! The code…
This is a 3D reference model of a 128×64 SSD1306 OLED display module, designed to assist with accurate placement and fitting in larger assemblies. The model captures the overall dimensions, mounting holes and pin header position commonly…
SSD1306 OLED Display Reference Model (0.91") A simplified, accurate 3D reference model of the popular SSD1306 0.91 inch OLED display. Perfect for CAD work and designing custom enclosures without having to measure the actual component! How…
A upgraded OLED case for CurrentRanger: finished front face and covers the OLED module making it more resilient in the parts box. No screws needed! This is a two-part print: uses a snap-in clip instead. This is designed for the SSD1306…
This is a case I designed for my TFT IIC LCD Displays. It snaps together and can be plugged directly into a breadboard. Added a deep box that I used M-F jumpers to extend the pins out of the box Print Settings Printer Brand: Prusa…
I wanted a way to reliably and simply mount an SSD1306 OLED board of the standard dimensions to my hobby enclosure, and this fulfills that need. Keeps the OLED display square and tight to the edges and doesn't wiggle around. Top Hat: for…
I designed this slim case years ago to hold and protect a tiny oled screen that I added to an old fan along with a wifi module to remote control the fan ( https://github.com/reivaxy/iotFan ) The original scad file was actually two files,…
This is a housing for: Wemos D1 Mini / ESP8266 ESP-12 0,96" OLED Display I2C SSD1306 CO2: Senseair S8 as well as MH-Z19 is fitting I've soldered a BMP280 and a SHT21 for temperature and humidity together Used DuPont cables Many…
Remix of the Terminal for SSD1106 1.3'' OLED to make it shorter and to remove the internal structures
Herramienta para abrir la tapa de reloj Steeldive SD1970. Compatible tambien con Berny AM1970 y AM134 No requiere soportes. Impreso con 3 paredes, 4 capas superior/inferior y 10% de relleno conectado, boquilla 0.4, 0.2 altura de capa
face plate redesigned to fit 0.96" OLED like the following: https://grabcad.com/library/ssd1306-oled-display-128x64-1
Octoprint monitor weather station esp8266 D1 mini bme280 case What a mouthful. It shows the diversity for which this can be used for. Usecases: Octoprint monitor Weather station InfluxDB querry NTP clock Desktop widget Whats needed: Wemos…
This diffuser is about the same length as the stock diffuser, but it comes up from the chassis about 4mm less than stock. This means you don't have to cut your bumper quite as much to run a chassis mounted diffuser. Can be printed at…
I had a SSD1306 0,96" OLED display which I wanted to use with my Open DTU. This Open DTU case was a perfect fit for my requirements but unfortunately it didn't include a cutout for the display. As the SSD1306 fits perfectly in the lid I…
This is a remix of the excellent Yoradio case design. My version is 12mm shorter and slightly easier to build. BOM: ESP32 Wroom with 38 pins and a wired WiFi antenna SSD1322 display ESP32 expansion board rotary encoder PCM5102 DAC…
Timer to help your kids brush their teeth properly. 2 minutes in total. Shows which part of the mouth to focus on and displays a smiley face when finished. Hardware required Arduino Nano (or its clone, works both on ATmega168 and…
Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required. This is a remix of the version found on Thingiverse: https://www.thingiverse.com/thing:2884823 I added 2 Led's (ws2812b) a passive buzzer and a button on the top.…
Air quality sensor SEN5x MH-Z19 SSD1327 Hello; I would like to present my take on air quality sensor made out of: ESP32 board SEN55 - PM/NOx/VOC sensor MH-Z19 - CO2 sensor SSD1327 - display Chassis will require : Filaments Geetech marble…
raspberrypi5 compact case with 2mm thickeness + x1001(nvme adapter) + ssd1306 case + official active cooler m2.5 flat nuts(x6) and 16.5mm standoffs(x3), which containing in x1001 Jan 28th, 2024 - SSD1306 was moved through other side, and…
This model is a compact front frame for a standard 0.96 inch OLED SSD1306 display module. The frame is designed so the module is inserted from the back and clicks into place. From the front, only the active screen area remains visible,…
Hello i have made this E-stop for the AMC-AASD15A servo controller from https://www.thanos-motion.com/products/thanos-amc-controller-rgb-v1-4/ https://www.thingiverse.com/tronicgr/ The E-stop is made with Multi material printers in mind…
DCC Ex Case - Built using a ESP32 D1 R32, Deek Motor Shield and OLED 0.96 SSD1306.
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
This is a panel for mounting the SSD1309 displays and further integration to projects. It may be easily modified or integrated to other 3D projects.
A slim case for Raspberry Pi Zero with the SSD1306 0.96'' I2C display and a gpio button. Can be used for various projects (e.g. pwnagotchi, for educational purposes). The case has latches for a nice snap-fit, no hardware needed. It also…
Two box , one can carry Arduino/uno / leonardo or smaller board ( it's exatly a leonardo that i use in my icpmax) and the display. A smaller second to box display SSD1322 solo, so you remote where you prefer the screen (like upper ICP)…
Create a modern, low-key digital terminal with a Wemos D1 Mini and a SSD1315 0.96" OLED display. You can use your terminal to show the time, info about a currently play track, or anything else you want! I use ESPHome for this, but other…
Screen: 0.96 inch OLED IIC Serial White Blue OLED Display Module 128X64 I2C SSD1306 12864 LCD Screen Board For Arduino For some reason its bit smaller compared to existing dongle cases, so had to create this one. Features: - Easy to…
A minimal bezel for the 0.91" 128×32px SSD1306 I2C OLED display. When the display module is placed in the bezel, the actual display portion (where the pixels are) is nearly fully centered with a very small amount of dead space around it…
Easy assembly toy. Based on the Volvo SD105 roller. You can see the assembly video here: Enjoy! Category: Construction Toys
SSD1306 0.96" OLED Display Mount Mount for the common SSD1306 0.96" OLED display. Designed for arcade sticks. Angles the display towards the player. Mounting material compatibility The mount was designed for 10 mm thick (0.3937 inch) or…
Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required.
Terminal for SSD1306 0,96" Node MCU and DHT22. Desk thermostat and hygrometer.
This is a placeholder you can print and/or incorporate into your models in place of an ISD1820 recording/playback module PCB. Useful for planning or test-fitting the module into your prints or other projects. There are many variants of…
Holder for a SSD 1306 OLED display.
Simple hotshoe. Holds firmly but can be easily removed. Mostly modeled on the Sigma SD10, but it should be universal.
It's designed for a 67mm cap, since I don't have another lens, so I haven't tried other designs, but remixing remains enabled, so you can edit it if you like.
This is my second Pi Zero Case designed mainly to hold my Pi Zero W , but also works with the normal Pi Zero as well if you are using wifi dongles. Its designed to allow the Pi to just slide in and the power cord keeps it in place. As it…
I remixed the original model, having split it into 3 parts for easier printing and assembling. You will need 8 heat set inserts and 8 m3x8 screws. Heat set inserts are to be inserted into the middle part on both sides. I used Wemos D1…
Mad Catz Tournament Edition Round 1/2 Display Panel for SSD1306 0.96" OLED Alternate option panel for the Mad Catz Tournament Edition Round 1/2 adapting my mount for SSD1306 0.96" OLED displays. A small part of the cable compartment will…
Basically just block that elevates the screen on the PCB, which I needed for a project. This version uses m2 heat insets and m2 screws to attach. The other benefit is because it uses female headers, the screen can easily be swapped if it…
This model is still in prototyping phase so stuff might not fit perfectly. You want a streamdeck but you are poor? This is perfect for you. Using this project you can add 4 keys and 1 knob to your keyboard. A very handy OLED screen is…
I noticed that the Gridfinity 1x1 bins are a perfect fit for the SSD1306 OLED screen, and as I really wanted to use these in my projects, I decided to create an extension to my gridfinity electronics workbench. This allows you to quickly…
Remix of FunnyGermanGuy's remix of Laurman's Rancilio Silvia Screen Mount over on Thingiverse. I added a bottom plate with an integrated magnet which is screwed on the top part because I didn't want to glue it on. Top part is mostly…
I build a “FFI BOX” to carry the SSD1306 1.3 " https://it.aliexpress.com/item/1005004993682117.html?spm=a2g0o.order_list.order_list_main.53.21ef3696w40tvo&gatewayAdapt=glo2ita PETG/PLA Material 4 x M2 Screws 4x M2 x 4 x 3.5 heat brass…
Nothing fancy, just a little cover plate that sits between a 4" speaker and the door skin of a Rover SD1 to cover up the annulus around the speaker, which has a huge impact on both sound quality and volume and really is a vital mod for…
Rook MK1.1 Bricks Skirt with cutout for 0.96" SSD1306 OLED display
I made this for a MIDI controller I designed (featured in a couple of the pics). You won't be able to use this directly, as the bottom profile is hella wonky as to avoid specific components on my PCB. But should be pretty easy to adapt?…
my homelab server by orangepi 5plus orangepi 5 plus case contaning zigbee coordinater, NVME heating spreads, SSD1306 additionally you need, M2.5x8mm SHCS x 4pcs my SSD1306 has abnormal size 24.7x27mm, you may need correction. my zigbee…
I used the original models and modified them rather crudely. Using TinkerCAD - and some original design using OnShape.
i needed a way to mount a oled display to my pi 5 setup, i have the m.2 hat . it has a couple holes on both sides of the nvme so i decided to mount my display there with a couple stand offs. i may expand this to other displays and…
Wanted to add a SSD1306 to my ZMK dongle, most existing models are for n!n clones but I wanted to use a Xiao BLE board on this one. Englmaxi's repo has a basic shape, but doesn't have enough room for dupont wires, no easy access to Xiao's…
Works in both orientations to suit any use case. Power supply is attached with two 5mm cable ties. Requires 2x DRP-02 Mouser: https://mou.sr/3PErJWP DigiKey: https://www.digikey.com.au/short/b9p5npf3 Jaycar:…
**Description Language:** DE, ENG, FR, CZ **Configurable:** YES **CAD Program: FreeCAD** # DE Basismodel für eine Befestigung eines SD1306 0,96 Zoll Display. Dieses Model dient dazu, es im Freecad in nachfolgenden Schritten für die…
Plant Stacks! - SSD1306 OLED Sign A remix of the OLED Display Bracket by @ebarnes_120516 to be used to bring your Plant Stacks! into the 21st century. Use a device like a pi or any microcontroller to display messages like watering…
The original model is a great design but I wanted mine to have rounded light shades as that's the normal design here (at least in the US). Also, I wanted to print the body in yellow and shades in black and my ERCF is not currently setup.…
The Thermaltake SD1 case uses a special clip for the both SSDs that can be installed. A long time ago one of my clips broke and I was able to model and print it using SketchUp. I used Blender to make a STL out of the sketchup file and…
2x2 gridfinity bin that holds the Canon PowerShot SD1400 IS camera. Also, includes slot for charger. Text is in the .3mf files and not the STLs. This works with the gridfinity grid system.
Printed in PETG on heavily modified ender3v2 using klipper.
this model set includes both a 3d printed base + stand, and a pole mount so it can be mounted atop a wood pole if desired. the recommended pole diameter is 5cm. tip 1: if the pole mount doesn't fit easily, sand the outside of the pole…
A remixed backplate for double screen version of Terminal for SSD1306 1.3" OLED and Wemos D1 Mini . Wider holes should accomodate more variations of Wemos boards (mine were not central on the original design). It's as simple as that!
XiaoWa PCB case model ( https://github.com/gargomoma/xiaoWa_pcb ). This model is made to actual dimensions and has no tolerances. Please enlarge it before printing to allow for material shrinkage. The model requires a 103450 battery and…
This cap will work with all Platinum MSD1500B mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip.…
Mount the Hanmatek SD1 under your table with 3 brackets and the station holder. Included a tip holder for threaded insert tips. Use ¼" screws for mounting to the station and #12x1" screws for mounting to your table. Hanmatek SD1:…
You'll want some tiny screws and washers to mount the board and power jack. The power jack is a standard type. Freecad sources included!
Just a additional Bottom for "Big Red Button" with Wemos Mini D and SSD1306 OLED Display Top Part and Button can be taken from original part
This is a simple enclosure for WemosD1 mini and sensors breakout board. In my case i used a DS18B20 to create a wireless temperature sampling point. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution:…
Modified AMC_Main_Remote_TOP to be printed in one part without the AMC-LCD_plug_Remote and the AMC-encoder_plug_Remote. also made the numbers a bit bigger and possible to be printed in multi colors. numbers can also be printed separately…
That's a chassis for my project at TTGO T-call. It controls 2-relays module, show info LCD SSD1306, powered by 18650 bat
Die ist ein Gehäuse für ein D1 Mini ein SSD1306 Display und AM2302 Sensor. Die Anschlüsse des AM2302 Sensor sollte um 90 Grad gedreht werden. Gedruckt mit PLA oder PETG.
I remade the Thanos AMD-AASD15 top plate to have the numbers right-side up, and the Thanos logo emedded for multimaterial printing. enjoy! Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 200…
Since I couldn't find a ready-made enclosure for the OpenDTU Fusion board with a Fusion POE adapter and 2.4" OLED SSD1309 display installed, I built my own. I think it turned out quite nicely and is quite easy to assemble. Unfortunately,…
qmtech mister fpga clone ssd1306 oled screen stand Category: Automotive
C'est un palier plastique qui remplace la référence 06 de l'éclaté de l'enrouleur Facnor SD150. Cette référence ne se trouve plus auprès du fabriquant, je n'en ai donc pas trouvé le numéro de référence. Pour retrouver le profil, j'ai…
3D print to hold the SSD1306 tiny display for the Synthux Touch 2
Remixed to also fit an OLED screen and my temp sensor. It's a bit janky as I didn't have the .step but it works.
Articulating Neck Joint for Halloween Animatronic Wolf - replaces TSD1900400. I used PETg, 0.6mm nozzle 0.3mm layer height, strength profile. Print flat, then glue together carefully.
ESP8266 WLAN Room Climate Sensor Case (DHT22 + SSD1306 OLED) This is a modular 3D printed case for a small WiFi room climate sensor based on the ESP8266. The sensor measures temperature and humidity with a DHT22. It shows the values on a…
a figurine of sd10 from tornado siren madness. just print it and paint it.
Doing a prototype for the ADMT4000 multi-turn magnetic sensor, I needed to mount the eval kit in a way that would let it sense the magnet turning at the end of a ballscrew. The model here is very specific to my setup, but I've included…
This was made for a school project upgrading the quadracyle to an electric gokart
Printed in PETG on heavily modified ender3v2 using klipper.
This is a 3D reference model of a 128×64 SSD1306 OLED display module, designed to assist with accurate placement and fitting in larger assemblies. The model captures the overall dimensions, mounting holes and pin header position commonly…
case for the SSD1306 OLED display. after inserting the display, heat and press the 4 pins to lock it, or glue it use supports only from the print bed for the screw holes post a make!
