74 modeli
Other than in the remixed model, you don't need thread inserts; the included screws fit into the holes. Make sure not to overtighten them.
Wydruk około 3,04 €–3,71 € nettoWstępna wycena jednego wariantu
0.8 MOD gear 150T for the Pentax 100 SDUF-II telescope, which can be applied for focus automation. Note: To rotate the focuser, one could apply Gemini Astro's motor with 0.8 MOD gear 40, which has the sufficient torque for rotation
Wydruk około 1,10 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cover for Garmin LiveScope Plus LVS34 Transducer
Holders for both the XIDIBEI transducer and the Seeed Studio transducer. Any VHB tape (very high bond) should work. The zip tie holes are 5 mm x 2 mm. Fusion 360 files included.
I needed a way to mount my transom-mounted garmin strike transducer to my new Old Town Sportsman 120 PDL kayak. I found a few designs here that I was able to quickly munge up to make a specific part. I used the profile of the base/mount…
Attaches to the nut on the top bolts for each pedal. These attach using the screws that come with the TT25. Print in the orientation they are saved in and use supports. Recommend you print with enough walls that the mount part for the…
Like a number of you, I'm finding that the universal transducer mounting plate is not very universal for the Old Town Kayak. So I'm making my own custom mounting plate for my Garmin Striker transducer. I've got it so that the transducer…
Fits the original 13mm bolt that came with original knob. If you don't have the original bolt then replace with stainless steel 13mm bolt in lengths of 60mm or 20mm depending on what knob needs to be replaced.
This model will allow you to pass through and mount a Garmin Striker 4 transducer to a Pelican Catch 110. Credit to user_174422861 On Makerworld for the original model and creation 0.2mm layer, 2 walls, 80% infill PET-G Use supports for…
I printed this with 6 walls, 50% gyroid infill we will see if it holds up the next season.
Pentax 100 SDUF is a classical imaging telescope, however, with the helical focuser that I detested. The default gear of Smallrig mini follow focus 3010 is 0.8 mode with 43 teeth, by adding the follow focus to Penatx 100 & changing its…
This is a two part model intended for mounting a Garmin Striker 4 transducer via scupper hole on a kayak. The top and bottom pieces can be attached together using zip ties that go through the provided holes. This makes it a bit more…
Inspired by RamjetX design https://www.thingiverse.com/thing:3077632 I made a bass shaker using the Mini Bass shaker pucks by Dayton for my Aluminium 8020 SimRig by www.swedishrigdesigns.com. In the stl files it's included also one design…
I dont like the original Haibike Sduro sidestand mounting position. The sidestand reaches far behind the rear wheel when lifted up and the bike can easily tip over when standing on the stand because of the inconvenient triangle point.…
WARNING: USE AT OWN RISK. Using this spacer may compromise your hull and sink your ski. You have been warned. Some notes: Printed with PETG at 100% infill. Designed with the Garmin GT56 transducer cable in mind. If the hole for the cable…
This was designed for Tuesfutu's live sonar ice fishing pole kit. It uses one m6 heatsert, mine were 9mm O.D. and 8mm tall like these. https://www.amazon.ca/dp/B0CS6YCWHD?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1 Print in PETG or…
Hook for a glass shower wall up to 8mm thick, for fixing a towel or washcloth. The towel can be inserted into the hook from above with the corner. To remove, the towel can simply be pulled down. Thus, the hook does not accidentally detach…
Es handelt sich um die gängigsten Ultraschallköpfe für Trainings und Simulationen. Genutzt für medizinische Trainings und Simulationen, wie dem Schockraumtraining. In das Loch kann ein Band oder eine Schnur geklebt werden. Drucken am…
These prints can be used with a galvanized 5/16 bolt, nut, and washer to mount a Lowrance transducer in the scupper holes of a Moken 12.5 Kayak. I imagine it could also be easily customized to other kayak makes and models if not used as…
Selbst konstruierte Kettenführung für Haibike SDURO Kettenblätter von 38 bis 44 Zähnen. Höhenverstellbar und wesentlich stabiler (siehe Fotos) als die originale Kettenführung, die wirklich sehr schnell bricht. Self-designed chain guide…
Mount for a Haptic Transducer on the accelerator pedal for SIMSONN Pro pedals
Improved design to add countersunk nuts for bolts 4mm & 5mm. Removed the need for a interfacing gasket as it just dampened the vibration effects. added a flange to the top bracket so it tightens to the fiberglass seat and not the plastic…
Edwards' TruWave invasive pressure transducer holder. It replaces the standard TruClip holder (item TCLIP05 from the Edwards catalog). Available in versions for one or two transducers. For assembly, I used a 1/4 and 2-inch French screw…
I printed these in PLA at 20% infill at 0.2 layer height. You will have to use screws to attach the legs to the base of the tripod and a screw so that the clip can hold correctly. You may have to scale the model up as I had to after…
This adapter allows you to plug and play your Garmin Striker plus 4 transducer to the Lowrance Ready bay on your Hobie Kayak. I cut up pieces from Yakfisher's design here to adapt to the cheaper transducer than comes with the Striker plus…
I ordered an ice transducer from Lowrance, and it did not come with a stopper. Printed in tpu @ 0.2 layer height and 20% infill. The bonus is that it floats.
Bottle holder bike Haibike Sduro Printing without supports Attach strapping tape
This is a transducer holder that lets you put a fish finder on a small boat using only a Scotty mount as the way to secure the transducer to the boat. The print includes the top (scotty adapter) and the bottom (transducer pivot holder).…
A simple nozzle holder for the people who don't have the flashlight and liked the Dingus Dude remix of the tray. Original link for the @DingusDude tray! https://www.printables.com/model/511396-ender-3-s1-pro-tray
Holder intended to be glued into DN600 manhole ring
Description Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment,…
An artistic sculpture. It could act as a sci-fi engine, shelf sculpture, trophy or award. This model was NOT created with any use of AI. It is designed to print without supports - assuming good bridging on your printer. If you collect or…
I created this remix so that I could have a place to attach my transducer arm without taking up an entire mount location on an inflatable skiff. I happened to have a Scotty 141 transducer mount so I took the gear head adapter off of it.…
#gridfinity tool holder to combine the King'sdun driver and iFixit small screwdriver set. The grid size is 5x8. The USB-c charging hole for the king'sdun is measured against all the USB-C cables I have. Bits should hold all of the…
I lost my cap for the power/data cable, so I made this one and printed it using TPU.
Inside threads would benefit from printing with thinner layers (used 0.12 myself, but could go a bit higher). Also added a thread test piece if you want to test the threads.
This bracket was designed to mount a Garmin Echomap Plus 44cv fish finder transducer to the Lightning Strike Kayak's transducer cover. It may help with mounting other transducers to other kayaks but no guarantee. Print Settings Printer:…
Since the SIMAGIC Haptic Pedals Reactor release there has been a lot of interest in FFB on pedals at an affordable price. As a cheaper DIY alternative I have created a generic housing for a small vibration speaker as an alternative to the…
Transducer storage cup that mounts to the Clam ice fishing electronics caddy. .3mf and .stl files included. Printed at .12 layer height with 3 walls for added strength.
Printing without supports Attach strapping tap
A bracket for mounting a transducer on a 8020 series 10 extrusion. A pair of them are used to create a version of the MiniLev found in Asier Marzo's instructable: http://www.instructables.com/id/Acoustic-Levitator/ The holes are sized for…
Wide grip for attachment to the medilisk, pole or part of the bed. Excellent for use, for example, during patient positioning when it is not possible to have the pressure transducer in line with the heart. Using this aid ensures correct…
This is a complete design for a system to send and receiver data using ultrasonics. Besides being a useful system for sending data it is also intended as a platform for exploring concepts and firmware as used in software defined radio…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Simple holder for the OSDUE Weeding Tools (6 tools),…
Parts: 2x M5-0.8 x 40 mm 2x M5-0.8 Metric Nylon Lock Nut
This bracket allows mounting a transducer to the back of your boat without drilling through the transom (potential water intrusion). Most aluminum boats have hull material protruding past the transom, which this bracket is mounted to.…
This is designed to fit Old Town kayaks that use the universal transducer plate mount. This replaces the plate from Old Town to achieve the angle required for the standard hummingbird mount. Uses 10-32 bolts about 5/8" long.
This is a common amazon piezo transducer for ultrasonic cleaners that typically comes with a 110volt power/wave form supply board. found at this link:…
Simple mounting bracket for tt25 transducers, can be used to mount to 80/20 t slot rails. Transducer mounts to this bracket using screws included with the transducer. Original could only be center mounted on a slot or offset mounted on…
Last Updated: September 4 2020 This adapter allows you to mount a Humminbird Helix 5 G2 DI GPS Fish Finder transducer to the bottom of a Vibe Shearwater 125 electronics pod. It may work for other Humminbird transducers to be attached -…
Hall effect current measurement module mount allows easy mounting on you project. These also allow a user adjustable setpoint that will toggle a digital I/O line in addition to the analog output for live monitoring of the current. These…
Mount for Garmin fishfinder transducer. I realize this mount with PETG 100% infill
Bolzen der das Schloss ersetzt so dass trotzdem Kraft mit dem Gewinde aufgebaut werden kann. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 200 Infill: 100 Filament: Sunlu PETG Category:…
joyousducky608 is a Builder on Roblox, best known for his builds in Build a Boat for Treasure.
This is a model I hacked at in tinkercad to allow a Garmin Striker Plus 4 transducer to mount to the hull of my Hobie Pro Angler 14. The model allows for four 8x3mm N52 magnets to be glued in, allowing the transducer to stay securely in…
Lowrance Transducer mount for Old Town PDL 120 Kayak. Print in PETG or other filament suitable for the outdoors and heat.
I used this spanner wrench to work with my Simrad/Lowrance depth transducer. The spanner wrench utilizes M5 heat-set inserts and 25mm M5 bolts as spanner pins. I used a 3/8-inch ratchet to turn it. I also applied a piece of Flywoo Ultra…
Tesla model S small rear drive unit coolant port designs. The dxf is just the plain outline in case you want to cut your own and thread a port in yourself. The BSPT file is threaded for a BSPT 3/8in hosetail. The other step file is the…
Mounts your GT20 Transducer to the back mounting plate of your pontoon - with no additional tools. Works on various mounting 1/8" thick, 5.5" Wide - mounting brackets using only zip ties to tension. Printable without supports. V2 Size…
this is a bone conducting mask created using an mh-m38 and a bone conducting transducer which is attached with a magnet for mobility links below: mh-m38 Bluetooth receiver:…
Adjustable bracket for installation of MS-13 linear transducer (or similar) onto Airbus A320 OEM sidestick units. The bracket is generic to both left-hand and right-hand side sticks as well as both pitch and roll axes. The following…
This is a representation of the acoustic component of a helicopter dipping sonar. It is currently used by the U.S. and other navies. It is designed to be hung by a string, but can be placed on a flat surface. I have included folded and…
Boost the realism of your sim racing rig! This set includes specialized mounting pads and brackets designed to install the popular Dayton Audio BST-1 bass transducers onto aluminum cockpits (rigs) constructed from structural profiles. Two…
Mount designed for the Lowrance Skimmer transducer for my Hook 3X fish finder. Construction adhesive was used to glue the 3D print to my Jon boat. I also provided the step for anyone that wants to change the mounting and remix.
https://github.com/Samuel-MIT/transducer-holder-for-focused-ultrasound-MOUSE-CAP This transducer holder was designed by Samuel Hansen and implemented in the Shan Lu Lab at the Chinese Institute for Medical Research (CIMR) in July 2026.…
This is a representation of the acoustic component of a helicopter dipping sonar. It was used by the U.S. and other navies for many years. It is designed to be hung by a string, but can be set on a pad for display on a flat surface. I…
This puts the transducer under the hull without hanging an arm off the side of the kayak. It clamps through a scupper on one long M6 screw, and you tighten the wing nut from inside the boat instead of lying under it. Four printed parts.…
This bracket attaches to the finder location of a Pentax 100 SDUF II to allow the use of a ZWO EAF 5v version. It works with the below ring gear and a modified version of the 65t gear that I also posted.
Created this simple spacer model for my dads Summit Fishing transducer pole. The spacer allows the shaft to turn freely, while preventing wobbling. While I have added a few standard lengths, we ended up going with the 100mm spacer for his…
Helix 7 cone transducer holder for ice fishing portable unit. it was printed from pla+ but hasn't been field tested.
This model will allow you to pass through and mount a Garmin Striker 4 transducer to a Pelican Catch 110. Credit to user_174422861 On Makerworld for the original model and creation 0.2mm layer, 2 walls, 80% infill PET-G Use supports for…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Simple holder for the OSDUE Weeding Tools (6 tools),…
Tesla model S small rear drive unit coolant port designs. The dxf is just the plain outline in case you want to cut your own and thread a port in yourself. The BSPT file is threaded for a BSPT 3/8in hosetail. The other step file is the…
Mount for Garmin fishfinder transducer. I realize this mount with PETG 100% infill
