14 167 modeli
When installing heat set inserts, a press tool can be a great help to ensure everything is aligned and straight in the end. And if you have a Dremel anyway, the Dremel Workstation can be a very versatile addition to your tool collection…
Wydruk około 6,33 €–7,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Everyone who is traveling with a Caravan knows it. The grassel and bollards in the fridge because the bottles bump into each other all the time while driving. With the help of this spacer, you can easily determine the size of your…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
Please heart, comment, and post makes! Seeing what you all use and how you use it makes it worth making more designs! V2 Update info at bottom: I've been wanting to print a case to hold Switch Cartridges anyway, but I decided rather than…
Wydruk około 3,19 €–3,90 € nettoWstępna wycena jednego wariantu
BOM: Printed with ROSA3D High Speed PLA Signal Violet This model set includes three 3D-printable nut inserts designed for 40×40 T-slot aluminum extrusion profiles . Each insert provides a clean, reliable way to mount M3, M4, or M5 nuts…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Photo Caddy Board Game Insert Collection **All previous Photo Caddy Board Game Inserts combined into one collection** Made specifically to fit Photo and Craft Keeper 4x6 inch storage bins (made by Simply Tidy and others), this series of…
Wydruk około 5,33 €–6,51 € nettoWstępna wycena jednego wariantu
This is a zero clearance insert for Dewalt miter saws. I modeled it from the insert on my own saw wich is a DW716 (12inch, dual bevel, NON sliding) from what I can tell from the replacement inserts on amazon, this will fit models:…
Wydruk około 3,71 €–4,54 € nettoWstępna wycena jednego wariantu
Edit 9/25/2023: Per the comments, I have revised the micro SD slot to not be so tight, but snug enough to hold the sd card. Additionally, the slot will now only allow the micro SD card to go into it half-way, making it easier to pull out.…
Wydruk około 5,74 €–7,02 € nettoWstępna wycena jednego wariantu
Insert for attaching honeycombs to the wall with empty fastener. UPDATE 14.12.2023 According to @Molot suggestion, I added model variants that can be printed without supports. See files: insert-countersunk-empty-no-supports.stl and…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
Wydruk około 1,35 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Desert themed house you can print for tabletop wargames such as Star Wars: Legion, 40k, etc. It prints all at once with no supports needed. If you are interested in other terrain files, check us out at imperialterrain.com Print…
Wydruk około 8,22 €–10,04 € nettoWstępna wycena jednego wariantu
I wanted a self-watering planter that I could insert in my various ceramic/plastic pots and would be fast, easy and economical to print. You can use this insert in pots you already have. Using the attached Fusion 360 file, change the…
Wydruk około 2,63 €–3,21 € nettoWstępna wycena jednego wariantu
3D-printed wall-mounted holder with a two-part design. The holder consists of a U-shaped base that is attached to the wall and a insertable component with two holes for screws or bolts. The insert pieces are made to slide into the base…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
usb security cover removal tool Update 20260216 v4 Increased opening angle by 5 degrees. Part 1- height + 0.2mm easy printing perimeter: 3 without supports Assembly: insert part 1 into part 2 fold part 3 together (edges must overlap)…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printable insert for Terraforming Mars (Terraforming Mars / Hellas & Elysium / Prelude / Metal Cubes / Dual Layer Player Boards). It holds everything in place and the boxes can be placed next to the board. This insert was especially…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Protective cover with lock Update Compatible with USB Security Insert Lock v4 Easy printing Perimeter: 3 without supports
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I combined both styles of the original model's case as I preferred it this way. Both STL and STEP files are provided. The case needs short M3 brass inserts like these . You need to drill the m3 holes on the lid, as I included a layer so…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a blank Decora wallplate insert, to cover an empty hole after you remove a device like a switch or plug. Design notes: The depth of the front part of the insert should bring it into near-flush alignment with your faceplate. I've…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Box inserts to efficiently store HeroQuest base game and Frozen Horror expansion - it all fits into one box. UPDATE: totally unplanned surprise- the Heroquest dice tower also fits in the box. HeroQuest Dice Tower by anchorless_81 -…
Wydruk około 5,16 €–6,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Features: Fits standard hex nuts from M3 to M12 Ergonomic knurled profile for a secure grip Simple assembly: press-fit or glue the nut Optimized for 3D printing (PLA, PETG, ABS recommended) Recommended Print Settings: Layer height: 0.2 mm…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
JERRARI3D.com The GEN2 Hex Bit Inserts are designed to fit the GEN2 Grid Drawers to holds them securely in place, but these are also designed to fit in any standard GEN2 lack drawer as well. They can be mixed and matched with other…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These dividers takes advantage of the slots in the design of the new Omnifixo M4.4 field box, feel free to make variations that suits your needs.
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original design didn't fit my shelves, it was to loose. I redesigned it and reduce the radius of the curve in other to make it more tight.
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The frog itself doesn't need supports, but the hook does.
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Hey folks! In my quest to find the perfect way to mount popular drawer organizer for screws, I stumbled upon an idea that turned out to be a game-changer – and I'm thrilled to share it with you all. Introducing my custom-designed…
Wydruk około 1,59 €–1,95 € nettoWstępna wycena jednego wariantu
I previously used a large spoon to aid drying out my Camelbak bladder, but it wasn't that good of a solution. This design isn't anything fancy, but it does a great job of holding the walls of the badder apart to dry it out. I printed it…
Wydruk około 5,24 €–6,40 € nettoWstępna wycena jednego wariantu
I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
A compact, customizable silverware insert for narrow drawers. This particular design fits perfectly in the drawer of a friend's Escape 19 RV trailer and precisely secures their silverware set. The design was very simple to draw up. I…
Wydruk około 10,54 €–12,88 € nettoWstępna wycena jednego wariantu
This modular insert allows you to store all the pieces of the tabletop game catan including the expansion Cities & Knights and the expansion to up to 6 players for the base game and the expansion. All parts can be printed as is, without…
Wydruk około 7,37 €–9,01 € nettoWstępna wycena jednego wariantu
This is a 3D printed part similar to commercially available caulk tube sealers . Have you ever used caulking or some other sealant gun / cartridge gun tube material, but didn't need the whole tube? This part will screw into the open end…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Update 11/09/24: Added lever for TS100/101 and PINECIL iron mounts. A simple lever that can be screwed onto the soldering iron mounts. The lever model with “TS” in its name fits the TS100/101 and PINECIL mounts of the press. These are the…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein Trichter, der beim Berühren mit der Gießkanne nicht gleich runter fällt. Ich habe die Zapfen, die der Schlossdeckel besitzt hier her übertragen. Dadurch kann ich den Trichter durch Drehen fest mit dem Stutzen verbinden. Da man leicht…
Wydruk około 5,81 €–7,11 € nettoWstępna wycena jednego wariantu
“Good joinery is done with a pencil, great joinery is done with a marking knife” -Jonathan Katz Moses. This addition to the Half Height Helper will let you add a carbide insert to use for scoring your material. The issue I have with the…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
A quick and easy-to-make replacement for your old, damaged, or missing toilet paper spool holder at home. The roller should fit most toilet paper holder brackets. Additional parts required: Spring from old toilet-roll spool (or a new…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena jednego wariantu
This template is for marking the mounting holes for the 2025 type Ikea Utrusta (110°) and Blum Clip Top Inserta hinges. The small part of the template is for the cupboard side, the big part for the door side. All you need is a pencil and…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed ECAS fittings for my Voron2.4/Stealthburner/ERCF projects, and there was no heckin' way I was going to use the original blue inserts. Couldn't find any files in the immediate Google search results, so I whipped up a few concentric…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Create several inserts for screwdriver or other stuff without the need to fix it on the honeycomb with a screw. Screwdriver Hook 20mm (0.787in) Hook 40mm (1.575in) print with Orange Prusament.
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🔒 Introducing Custom 3D Printed Inserts for the Lifepod 2.0 for the Glock 17 Gen 5 Insert by Veracon Engineering! Elevate the security and organization of your firearm storage with our custom-designed Glock 17 Gen 5 Insert for the LifePod…
Wydruk około 11,86 €–14,49 € nettoWstępna wycena jednego wariantu
I needed a case for one of my Games that didn't originally come with a case. So I started looking into 3D print options. I found the one that is linked here. I liked it the best for what I was looking for and overall design. I wanted a…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
The System These containers are designed for the assortment boxes from AuerPackaging. You can find them here: https://www.auer-packaging.com/de/de/Sortimentsboxen.html My Printtime The bins are designed for a 0.4 Nozzle. I recommend…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zero clearance insert for the Bosch GTS635-216. I had to print in two pieces and glue them, but I've included an "un-split" stl also. I added sections of 100% infill around the corners, the joint, and where the blade will cut through. I…
Wydruk około 3,60 €–4,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Why spend $20 on Hornady's Powder Measure Drain insert, when you can print one for 14¢? Printing Notes Contact area on the build plate is very small. Use a brim. A little bit of wet-sanding may be necessary.
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…
Wydruk około 6,54 €–7,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Set of inserts for board game AGRICOLA. It helps to orginize pieces inside of box and keeps every parts sorted.
Wydruk około 5,32 €–6,50 € nettoWstępna wycena jednego wariantu
I made these boxes for my own drawers based on my kitchen utensils, specially the knifes that I modeled to fit my specific set of knifes (Brand: Tramontina). As a starting point I generated the gridfinity boxes using an onshape template…
Wydruk około 10,14 €–12,39 € nettoWstępna wycena jednego wariantu
A Zero Clearance Insert for the Bandsaw. Model Rikon 10-3061 10" Bandsaw with better dust collection. I included the f3D to be able to change the size to fit your own bandsaw. Edit 3/31/24: Added 2 files for 6mm longer cut length in the…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
Update 2024-12-22 : Added a new version with more space for extensions and wider space for sleeved cards. I didn't like that the cards had to be divided into three stacks. So I built this insert where you can store the normal deck cards…
Wydruk około 8,52 €–10,41 € nettoWstępna wycena jednego wariantu
This is a zero clearance insert for a Delta Rockwell 14" band saw. It was modelled on a 1950 model, but should fit a wide range of vintages. Fusion 360 model file is included if you need to tweak it.
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
Insert for Chaos expansion for the game Karak 2 - you can exchange it for the figure holder in my original insert - here is the link: https://www.printables.com/model/1316316-karak-2-imperium-insert Insert for all ingame expansions here:…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
The “Pop” model of the Nespresso Vertuo coffee machine comes with a drip tray designed for Nespresso's own “Vertuo Gran Lungo” mugs. To use normal sized mugs you need to remove the drip tray, which is not ideal. I liked Matt Rayner's…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
The insert of my Xacto knife broke (see photo). First I wanted to buy a new holder, then I decided to print a replacement. The model was quickly made in Fusion 360. I printed it with 0.1 mm resolution and in PETG. Although the M5 thread…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When I go skiing, I always am nervous pulling my phone out on the chairlift, worrying that even though I'm gripping it as hard as I possibly can… a bump on the ride is going to cause me to drop it. If I had even the slightest sense of…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holds all the tokens and pre order gauge from Kill Team Octarius
Wydruk około 2,98 €–3,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of https://www.thingiverse.com/thing:1342480/ This model includes non-keyed (rectangle) and keyed (a cutout that makes socket to be inserted only one way). I removed all of the code that wasn't directly related to iec…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Cat7 insert for Cable Comb v5
Wydruk około 2,15 €–2,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Multiple size ring inserts for Craftsman router table with 2 inch opening.
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This are stackables Insert Boxes for the Eurobehälter /Eurobox TK400 and TK600 /75 /145 etc. Settings Value Infill 15% (adaptive cubic) Perimeters 2 Layer Height 0.20 mm Speed Material PETG / PLA Supporting Material none Comments printed…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Are you tired of your Horrified board game's messy setup and chaotic storage? You're not alone! While Horrified is a fantastic game, its original insert leaves much to be desired, offering little more than cardboard and plastic bags for…
Wydruk około 2,59 €–3,16 € nettoWstępna wycena jednego wariantu
These are plastic inserts for your cardboard tokens, compatible with the 2021 version of Tyrants of the Underdark.
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Insert pro hru Karak - 2. vydání (čtvercová krabice). Tato verze insertu pojme plastovou věž na dlaždice, 16 kusů mřížek a veškerá vydaná rozšíření. Rozměr insertu je 296 x 296 x 67 mm - insert nepasuje pro verzi KOSMOS! Insert pro verzi…
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
Micro SD card is not easy to insert/remove from dji mini 3 pro drone, searched for uploaded designs, but didn't find many tools. Decided to try my first design and upload, hope you find it useful as well. Simple design in Tinkercad,…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I didn't want captured nuts as it requires pausing the print partway through. I plan to make several of these so it helps to save time during the printing process. Other spiders with slots exist, but only for the metric remixes. This one…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
My kids kept destroying the cards when we play Exploding Kittens so I picked up sleeve protectors to help them last longer. On the plus side the cards are in great shape. On the other side, they no longer fit in the tray that comes with…
Wydruk około 4,36 €–5,32 € nettoWstępna wycena jednego wariantu
Having purchased some Chef's Path containers to help store my open filament spools. I opted to add some colour changing silica gel beads into each container to help ensure moisture wasn't going to be a problem. However, using the…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
Box insert for 2021 HeroQuest Mage of the Mirror expansion. This is meant to be used along side HeroQuest 2021 and Frozen Horror box inserts by Atree so that the Base game, The Frozen Horror and Mage of the Mirror expansion fits into one…
Wydruk około 4,65 €–5,69 € nettoWstępna wycena jednego wariantu
This is an insert for the board game Arcs , by Leder games . It enables you to have all component for the base game and the Leaders and Lore expansion. The Campaign expansion provides already a nice insert but it makes the box massive.…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
Became tired of to be able to fit a normal 33cl sleek can or a 50cl PET bottle in the OEM holder without them flying away if I brake or do anything with the car, wanted to learn a bit of CAD and made these for a tighter fit then original…
Wydruk około 5,24 €–6,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After converting the Mk4s to the CORE One I had a lot of leftover parts, so I made this heat insert press out of them. Feel free to remix this model. Parts reused: Old print bed 2 x 8mm rods (from the X-Axis) 4 x 8mm bearings (3 from the…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
Dieses Original Midland SMA-Flex-Antennen-Kit https://www.mwf-service.com/shop/midland-sma-hyflexantennen-set-fuer-g7-g8-g9-g14.html ermöglicht den problemlosen Austausch der fest eingebauten Original-Gummiantenne gegen ein passendes…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Lettering inserts for your LCD cover. Print instructions Printed in PLA with dual colors. I printed each letter individually then used a tooth pick and Gorilla Gel superglue to line the cavities then carefully insert the letter and fix…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Simple Skadis holder for eight Pinecil or TS100 type soldering iron tips with bonus top pocket and tiny right-side oval slot for a bit of additional storage. Nice companion for mounting above the Skadis Pinecil holder/soldering station:…
Wydruk około 9,09 €–11,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a set of inserts to organize the many elements of the Messina 1347 board game, from Delicious games. No special instructions for printing, I set the fill at 15% to make it lighter. Print four units of the player tray and lid.
Wydruk około 3,14 €–3,84 € nettoWstępna wycena jednego wariantu
I designed a wing for a Losi Desert Buggy XL, printable by any FDM printer.
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits into a tin/box/tray/bag/dish to keep cupcakes safe. Use 2 tied together for a half sheet size or 4 for full sheet.
Wydruk około 2,33 €–2,84 € nettoWstępna wycena jednego wariantu
This is a follow up of my previous model for War of the Ring (2nd ed) fast setup insert. With this insert you can store both the Lords of Middle Earth and Warriors of Middle Earth expansions in the Warriors expansion box. It is composed…
Wydruk około 2,50 €–3,06 € nettoWstępna wycena jednego wariantu
Simple Skadis holder for common 61.5mm diameter solvent squeeze bottles. This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks. Required Parts Printed hooks See linked project for more details M2.5 heat-set inserts CNC…
Wydruk około 6,33 €–7,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix GoPro Tripod Mount with a pocket hole for a 1/4" Hex Nut + remix for Insert Nut
Wydruk około 0,73 €–0,90 € nettoWstępna wycena jednego wariantu
This is the newer improved version of my 1911 Pistol Lighter, it's designed to use Heat-Set Inserts. You're gonna need: 5x M3 Heat Set Inserts and M3x12 Screws 4x M4 Heat-Set Inserts and M4x10mm Screws Originally printed on a Prusa XL I…
Wydruk około 11,87 €–14,51 € nettoWstępna wycena jednego wariantu
Model Description: This is a playable insert for the Welcome to board game. My goal with this design was a simple and clean storage solution as well as a usable tray to keep all the cards organized and easily readable during play. Simply…
Wydruk około 7,11 €–8,69 € nettoWstępna wycena jednego wariantu
This is an insert for the recessed area on the dash on a 2013 F250. It provides a flat surface to mount a stand for your phone. Corner stands are included, but are designed for my phone case. The corner mounts should be easy enough to…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
External dimensions 82.000, 11.000, 165.000 mm
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Skadis holder for common 60mm diameter solvent pump bottles. This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks. Required Parts Printed hooks See linked project for more details M2.5 heat-set inserts CNC…
Wydruk około 4,98 €–6,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have found that the inside of my wetsuit boots struggle to dry without being propped open, which is difficult to do, especially when away. So, I quickly designed this! These are designed to go inside your wetsuit boots to keep them…
Wydruk około 3,10 €–3,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Aufbewahrungsbox für Ruthex Aufsätze zum Gewindeeinschmelzen M2-M8. Verschluß mit 4 Magnete Durchmesser 5mm x 1.7mm. Storage box for Ruthex attachments for thread melting M2-M8. Closure with 4 magnets diameter 5mm x 1.7mm.
Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu
The holder has space for 24 V6 nozzles, it is also marked with three diferent sizes for 0.2, 0.4 and 0.6 diameter nozzles or you can just have three gorups of eight nozzles the choice is yours. There is also an option with space…
Wydruk około 2,80 €–3,43 € nettoWstępna wycena jednego wariantu
Use m2 x 3,5 mm x 2 mm heat inserts, printed at 100% infill no supports 0,12 layer height in PLA
Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu
🔒 Introducing Custom 3D Printed Lid Insert for the Lifepod 2.0 by Vaultek! Elevate the security and organization of your essential gear with our bespoke Lid Insert crafted specifically for the Lifepod 2.0. Engineered with precision and…
Wydruk około 7,75 €–9,47 € nettoWstępna wycena jednego wariantu
Stillness insert A remix of the Waveshare 7.5 e-ink display insert for Ikea Rodalm Frame that can hold the TRMNL 7.5" (OG) DIY Kit , using a slightly modified base plate from the Triangular Prism 3D Enclosure . Made for my project…
Wydruk około 2,77 €–3,39 € nettoWstępna wycena jednego wariantu
Hey! I recently got a standing desk from IKEA and the KOPPLA extension cord that is supposed to slot into the cutout in the desk was and is sadly out of stock. I got annoyed by having an empty space in my desk being unused, so instead I…
Wydruk około 2,32 €–2,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A replacemnt insert for the original organizer in the box. It's designed to accommodate the Caracter Markers designed by Colecago . It's low profile because we keep all the cardboard counters in resealable snack bags. There's enough room…
Wydruk około 44,63 €–54,55 € nettoWstępna wycena jednego wariantu
Bottom was removed by lowering the model a bit. So don't use the place on printbed command - this will bring it back. For more information see the original insert post.
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
Remix pro Prusa MINI + upravené stěny insertu, ať se dá lépe brát obsah. Remix for Prusa MINI + redesign of walls, for better takin of staff.
Wydruk około 4,97 €–6,07 € nettoWstępna wycena jednego wariantu
6mm Knob using Rivet-Nut Insert, Nut-Sert, or Nut-Cert I wanted some knobs that matched the blue CF arm. https://www.bulletpointmountingsolutions.com/ Here is my fix. I used 3D Fuel PRO-PCTG (Cobalt Blue)…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This insert is designed to fit Banangrams in the photo caddy. This design along with several others have OpenSCAD files available on my GitHub Made specifically to fit Photo and Craft Keeper 4x6 inch storage bins (made by Simply Tidy and…
Wydruk około 4,81 €–5,87 € nettoWstępna wycena jednego wariantu
This heat-set insert press is designed to be budget-friendly while still providing a functional tool. Most of the necessary components can be printed, and the 6mm rods can be sourced from old laser toner cartridges. Depending on the…
Wydruk około 5,56 €–6,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do you not want to drill the wall or a piece of furniture? Here is an insert for the honeycomb storage wall which allows you to stick the wall with double tape. STLS and GCODES included.
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
Needed a way to hang my kid's potty insert ( Babybjorn Toilet Trainer ) in the bathroom but all the toilet hooks available don't fit on my toilet. Decided to make a hook I could hang on the wall next to the toilet instead. I'm using a…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this “bling ring” to fit into the end of the Honeycomb Wall Spool Storage mount. This was originally designed so that you could print the “bling ring” in the color of the filament that was hanging on the hook for a quick reference.…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is the model for an insert for an Ikea Kallax Drawer with the dimensions 27.5 x 30.5 cm. The box has the dimensions that it fits exactly 3 times in width and 2 times in length in the drawer. It's perfekt for cable management or…
Wydruk około 5,02 €–6,14 € nettoWstępna wycena jednego wariantu
Der Bügel dient zur besseren vertikalen Filament-Führung beim entladen.
Wydruk około 12,24 €–14,96 € nettoWstępna wycena jednego wariantu
Upgrade your Jumanji game box with these 3D inserts. Keep your components organized and secure with custom compartments for the game board, cards, tokens, and dice.
Wydruk około 3,22 €–3,93 € nettoWstępna wycena jednego wariantu
