Wyniki wyszukiwania: skadi

Sortowanie

Liczymy pasujące modele…

P
Printablesfoxontherun

Skadis / Skådis - Plier holder

A simple triangular structure that holds two pliers, and a lip to prevent them from falling off. I modeled the base on the caliper holder by Synthetic_Future, which in turn is based on Brian.Kuos model. After trying out a couple of…

Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu

Pobrania
3931
Polubienia
495
Ocena
4,83
P
Printableskrisennerd

IKEA Skadis - Cutter

Holder for a cutter.Fits on a IKEA Skadis Board. Based on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 You can find the whole IKEA Skadis pegboard one my blog (article is in German):…

Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
3296
Polubienia
571
Ocena
4,83
P
Printablestristan

USB Stick Holder for IKEA Skadis

Printing Instructions I had no issues printing the thing in PLA on my Prusa Mini + with 0.2mm layer height and using no support or anything.

Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2983
Polubienia
574
Ocena
4,93
P
PrintablesDaHouzKat

IKEA SKADIS Wall Mount

I like things that are not permanent, easy to install or remove so i created my own Screwless IKEA SKADIS Wall Mount using 3M Command Large Picture Hanging Strips What you need IKEA SKADIS Board or 3D Printed SKADIS Board 3M Command Large…

Wydruk około 2,53 €–3,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2208
Polubienia
415
Ocena
5
P
PrintablesCabbitCastle

Ikea Skadis Pegboard Wargaming Paint Bottle Holder

Tips are appreciated and go towards creating new designs A friend of mine is into wargaming and wants to organize his paints a little bit better to have them easily accessible and all stored neatly. He saw the design by Black Hussar which…

Wydruk około 4,92 €–6,01 € nettoWstępna wycena jednego wariantu

Pobrania
1970
Polubienia
573
Ocena
4,5
P
PrintablesMany24

IKEA Skadis - Hex key holder / Držák na inbusy Wera

Simple 2 piece holder for hex key set, specifically made for Wera set but probably can be used with many others. This design works with 2 hooks, which is easy to install and remove, but holds very well thanks to the small bumps on the…

Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu

Pobrania
1490
Polubienia
389
Ocena
4,92
P
Printablesfoxontherun

Skadis / Skådis - Fiskars scissor holder

A scissor holder for the Skådis / Skadis system. Specifically for the Fiskars 21cm scissors.

Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu

Pobrania
1292
Polubienia
175
Ocena
4,85
P
Printablessteffenbew

IKEA Skadis Cutter / Scissors Holder

Holder for a slightly thicker cutter or scissors on an IKEA Skadis board. I printed this model with PLA with 0.2mm layer height.

Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu

Pobrania
1191
Polubienia
174
Ocena
5
P
PrintablesWegBier

Skadis Paper Towel Holder v2 (fully 3D printed)

After creating a paper towel holder for Skadis that required a 12mm tube, because I had that lying around, I thought that it should be possible to have it fully 3D printed in one piece each. So here we go v2 of my Skadis Paper Towel…

Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1180
Polubienia
98
Ocena
4,88
P
PrintablesAaronOaks

Ikea Skadis Hammer Holder

Ikea Skadis (pegboard) mount for a hammer. Remixed from the original to use with Ikea Skadis pegboard system.

Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu

Pobrania
1088
Polubienia
150
Ocena
4,6
P
PrintablesRonny

Airpod Skadis

A airpod holder for the Ikea Skadis pegboard. I left some space in case you use a silicon protector. Charger cable will fit in the hole Print instructions Print it upside down. The rest does not matter. I printed it in PLA 0.15 thickness…

Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu

Pobrania
1070
Polubienia
193
Ocena
4,9
P
Printablesorax

IKEA SKADIS PlayStation DualShock 4 Controller Holder

DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…

Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu

Pobrania
806
Polubienia
138
Ocena
4,92
P
Printablescodos

Paperclip for Ikea Skadis

Smart litte clip for attaching notes to your Ikea Skadis board. Holds paper with friction, no moving parts. Notes can be inserted from the top or bottom. Printed lying on the side worked fine for me. Print Settings Printer: Prusa mini+…

Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu

Pobrania
649
Polubienia
153
Ocena
4,88
P
PrintablesLex

Skadis Containers and Shelves

Organize that Skadis! Download these Skadis compatable organizers today, and keep your workspace free of pens and benchies 😉 This design uses the Skadis T-Clip System by Will , you can download the required clips from there! You will need…

Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu

Pobrania
541
Polubienia
113
Ocena
4,75
P
PrintablesKela

Skadis to Kallax Adapter REMIX

print in shown oritation, pause at layer 51 (14,40mm) and toss in a M4 nut in both. enjoy i used 0.6 nozzle on CR-10 Smart (klipper) layer height 0.28, layerwidth 0.72. 100-125mm/s 3Dsupreme PLA+ off white (colour seemed to fit)

Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu

Pobrania
480
Polubienia
100
Ocena
5
P
Printablescodos

Small Shelf for IKEA Skadis (remix of nt2021)

Made a remix of nt2021s shelf with stronger hooks an only 2 supports at the bottom for cleaner design. Update: Corrected the slight angle of the shelf by decreasing the tolerances. Print Settings Printer: Prusa mini+ Rafts: No Supports:…

Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu

Pobrania
424
Polubienia
79
Ocena
5
P
PrintablesNunuz57

Ikea Skadis Revell glue holder

Skadis holder for Revell Contacta glue : https://amz.run/5fef 3D PRINTING SETTINGS Can be print on 0.2mm layers Requires supports

Wydruk około 1,08 €–1,33 € nettoWstępna wycena jednego wariantu

Pobrania
424
Polubienia
55
Ocena
4,94
P
PrintablesApex23

Skadis Tamiya 250ml Thinner and Airbrush Cleaner containers rack

This Skadis rack can hold 2x a 250ml Tamiya X-20a, airbrush cleaner or lacquer thinner container. Inner dimensions are 55mm x 72.5 mm The design was inspired by the Skadis Tamiya Cement etc holder of SoBaldrick…

Wydruk około 4,64 €–5,67 € nettoWstępna wycena jednego wariantu

Pobrania
402
Polubienia
60
Ocena
5
P
Printablesorax

IKEA SKADIS Stadia Controller Holder

Stadia Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to Coopey for its contour sketch of the…

Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu

Pobrania
393
Polubienia
63
Ocena
4,78
P
PrintablesTurbopstros

IKEA SKADIS Shelf with Honeycomb Pattern

IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…

Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu

Pobrania
385
Polubienia
50
Ocena
5
P
PrintablesBaron

SKADIS hammer holder

Plastic hammer holder Ø 42 mm Holder for Ikea Skadis

Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu

Pobrania
349
Polubienia
48
Ocena
4,67
P
PrintablesTache

SKADIS Dewalt 20v Battery Holder

This model is a SKADIS holder for Dewalt 20v Batteries. It uses the SKADIS T-Clip system designed by @LineArcLine . It is designed to be easy on and off, bypassing the latch.

Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu

Pobrania
318
Polubienia
46
Ocena
5
P
PrintablesW&H

Dnd idea skadis dice holder

Ikea Skadis dice holder. Compatible with RPG dices: d100 d20 d12 d10 d8 d6 d4 There are two versions of this model - with and without D&D logo (see below) Orginal authors: This model is a remix of @Shmoee “ DnD Seven Dice Container with…

Wydruk około 2,37 €–2,89 € nettoWstępna wycena jednego wariantu

Pobrania
308
Polubienia
92
Ocena
5
P
PrintablesOtty_Skipper

IKEA Skadis tweezers holder

A simple holder for tweezers that only requires 2 slots in a row.

Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu

Pobrania
299
Polubienia
33
Ocena
5
P
PrintablesBostra

IKEA Skadis charger holder Parkside 12V

I created a bracket for the Parkside 12V wall charger IKEA Skadis. You need to print in portrait, use supports and I recommend a brim. You can use my attached 3mf file where everything is properly set up and tested. I recommend first…

Wydruk około 1,69 €–2,06 € nettoWstępna wycena jednego wariantu

Pobrania
294
Polubienia
37
Ocena
5
P
PrintablesTomáš j Hajda

Bosch PKP 18E glue gun holder for IKEA Skadis

My wife needed a holder for her Bosch PKP 18E glue gun for IKEA Skadis pegboard. I took inspiration from Pontus , however designed from scratch. Redesigned it so it holds also 2 glue sticks (11 mm sized) as there was just a convenient…

Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu

Pobrania
221
Polubienia
25
Ocena
4,67
P
PrintablesWegBier

Tradfri On/Off Switch Skadis Mount

An IKEA Skadis mount for the Tradfri On/Off Switches. The base plate from the Tradfri switch is screwed onto the Skadis holder with two M3 nuts and bolts, I used M3x6. You could also just use the provided double-sided tape to fix the base…

Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
220
Polubienia
68
Ocena
4,67
P
PrintablesMaster2386

IKEA Skadis Holder Zollstock / Meterstab / Folding Ruler

Printinformation: Use Support for the hooks. ("Support on build plate only") Thanks to https://www.printables.com/@Historicc_559983 for providing the Parametric IKEA Skadis Hooks i used in this Model.…

Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
217
Polubienia
17
Ocena
5
P

Ikea Skadis Bottle Holder 55mm ID 3D Lac

I needed a slightly bigger inside diameter to house a larger bottle. In my case it was a 3DLac aerosol can with a 2-1/16" diameter. MKE Dan's models looked great so I remixed it to be a bit taller, and with a 55mm inside diameter. I…

Wydruk około 3,50 €–4,28 € nettoWstępna wycena jednego wariantu

Pobrania
207
Polubienia
29
Ocena
5
P
Printablescodos

Membership-Cards-Holder for Ikea Skadis

A nice storage for all those creditcard-sized membership-cards lying around. Holds up to 10 cards. Printing upside down without supports worked fine. Print Settings Printer: Prusa mini+ Rafts: No Supports: No Resolution: 0.2mm Infill: 20%…

Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu

Pobrania
206
Polubienia
28
Ocena
4,8
P
PrintablesPenguinNinja

Skadis Boards Linker - Tighter Fit Remix (Non-magnetic version)

This is a remix of the Skadis Boards linker by Koprov that has thicker pegs to provide extra tight fit in the board's hole. The fit now is very tight. In addition to the original model where you could only position the links horizontally,…

Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu

Pobrania
196
Polubienia
27
Ocena
0
P
Printablesboecko

Parametric Ikea Skadis Board for MK3/MK4 Buildplate + SCAD-Customizer/Generator

Models This Model contains Skadis pegboard for the size of the MK3/MK4 buildplate with drillings for M6 screws customized pegboard Skadis pegboard in a triangle shape and the OpenSCAD-Files to generate your own sized boards.…

Wydruk około 5,10 €–6,24 € nettoWstępna wycena jednego wariantu

Pobrania
192
Polubienia
22
Ocena
0
P
Printablescodos

Bit-Set-Holder for IKEA Skadis Pegboard

Organize your Drillbits on your Skadis-Pegboard with this print for the common 10-bit-sets.

Wydruk około 0,85 €–1,03 € nettoWstępna wycena jednego wariantu

Pobrania
174
Polubienia
29
Ocena
5
P
PrintablesEnrico Turone

Spacers for IKEA Skadis wall/wardrobe

Spacers for IKEA Skådis are accessories that allow you to mount the perforated Skådis panel on various surfaces, such as walls or wardrobes, while maintaining some distance between the panel and the mounting surface. This spacing is…

Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu

Pobrania
168
Polubienia
22
Ocena
5
P
PrintablesCarlos Luna

Skadis - 5 Diamond File Holder

A simple Diamond File Holder compatible with the IKEA SKÅDIS pegboards. The holes have a diameter of 4 mm in the narrow end and 12 mm in the wide end. The height of the piece is 13mm. I include the scad file, so you can personalize the…

Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu

Pobrania
164
Polubienia
12
Ocena
5
P
PrintablesAngel

Deburring tool holder for IKEA Skadis

I liked the idea of the deburring tool holder and the idea of 45 degree printing to avoid supports. So I designed my own holder using these ideas for my Skadis panels. Fits CGBOOM brand tool. Feel free to ask me to adapt this model if you…

Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu

Pobrania
164
Polubienia
11
Ocena
4
P
Printablesfoxontherun

Skadis / Skådis - Fiskars Craft Knife holder

A simple craft knife holder for the Skådis / Skadis peg board. It protects the blade so does not make room for the cap. I printed it with 3 perimeters and 15% Lightning infill and it seems super sturdy. Supports are needed for the pegs.

Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu

Pobrania
160
Polubienia
19
Ocena
4,5
P
Printablesbeanieboi

Unifi U6-Enterprise Skadis Holder

A holder for a Unifi Enterprise Access Point. Print settings: You need to add modifiers around the hooks. I added spherical modifiers with 100% infill. All other infills are at 15% supports needed The 3mf file should already include the…

Wydruk około 2,23 €–2,73 € nettoWstępna wycena jednego wariantu

Pobrania
143
Polubienia
23
Ocena
5
P
PrintablesBen

Plate / Sheet Holder for IKEA SKADIS - 3 Plates of all sizes - Prusa, Bambu, Creality, Anycubic, AnkerMake

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ Organize your build plates of all sizes in style! This minimalist, premium-looking holder is designed to fit the IKEA SKÅDIS pegboard and securely store up to…

Wydruk około 1,97 €–2,41 € nettoWstępna wycena jednego wariantu

Pobrania
138
Polubienia
24
Ocena
5
P
PrintablesTheCyberfreak

AppleWatch Strap Wall Mount / Skadis Mount

This is my first project, from design to print. This wall mount is used to attach Apple Watch bracelets to the wall. Either as a single or for four wristbands. It fits all bracelets, whether 40 or 44mm. For the Sportsloops, all three…

Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu

Pobrania
133
Polubienia
31
Ocena
4,8
P
PrintablesDaniel B.

IKEA Skadis light

Add light for your Ikea Skadis. 8 Grams No support needed

Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu

Pobrania
125
Polubienia
66
Ocena
4,5
P
Printablessmoothie

Skadis pen and notes box

Simple and thin box for Ikea Skadis system This model is using Skadis T-Clip System ( https://www.printables.com/model/256896-skadis-t-clip-system ), see link for details. I wanted to have it bulletin board mountable, but also…

Wydruk około 4,72 €–5,77 € nettoWstępna wycena jednego wariantu

Pobrania
123
Polubienia
23
Ocena
4,67
P
PrintablesPenguinNinja

Skadis Boards Linker - Tighter Fit Remix (Magnetic version)

This is a remix of the Skadis Boards linker by Koprov that has thicker pegs to provide extra tight fit in the board's hole and imbedded magnets for light tools. The fit now is very tight. In addition to the original model where you could…

Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu

Pobrania
121
Polubienia
18
Ocena
0
P
PrintablesFraxinus

IKEA KOPPLA extension cord mount for IKEA SKADIS pegboard

This mount allows you to place your IKEA KOPPLA extension cord anywhere on the SKADIS pegboard without using glue or screws. It is based on an amazing model made by Cunfusu which I found on Thingiverse…

Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
119
Polubienia
33
Ocena
5
P
PrintablesDennis

Floating Nintendo Switch Skadis Holder | No Supports | Under 20g Filament

No need for Supports. I printed it with PLA. I would recommend to print the Twist-Clips with PETG.

Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu

Pobrania
117
Polubienia
27
Ocena
1
P
PrintablesNémet István

Print-In-Place Locking mechanism for SKADIS style boards (OPEN DESIGN)

Print-In-Place locking mechanism for SKADIS pegboards. The model is made for 3mm boards! Also the STEP file is parametric at the major dimensions, so you can customize it for your board thickness. With STEP file you can integrate this…

Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
115
Polubienia
74
Ocena
5
P
Printablesdick

Skadis T-Nut mount for Stanley Fatmax snap-off knife in 9mm

This is a mount for holding a Stanley Fatmax 9mm snap-off knife (model 0-10-475) on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need only one nut and the M2.5 hardware to attach it. I use an…

Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
115
Polubienia
8
Ocena
5
P
PrintablesJoe

Skadis Photo Notes Picture Memo Rail

This Skadis rail can hold photos, notes or the favourite drawings from your kids. Simply slide the paper into the rail and the bar inside will grab onto it. To remove it pull firmly on the paper and it will slip out of the rail. There are…

Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu

Pobrania
105
Polubienia
20
Ocena
4,5
P
Printablesdick

Skadis T-Nut mount for Klein Wire Cutter and Stripper

This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…

Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
92
Polubienia
8
Ocena
4,67
P
PrintablesPenguinNinja

Prusa steel sheet holder for Skadis

I have an IKEA Skadis board right next to my printer. I'm currently going through it and organizing it into half functional tools that I use around my printer often and the other half being different prints I have made in the past. I…

Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu

Pobrania
79
Polubienia
22
Ocena
5
P
Printablessxlx0

powerstrip holder for ikea skadis 43x50mm

adapted the size to fit a 43x50mm powerstrip

Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu

Pobrania
78
Polubienia
10
Ocena
0
P
Printablescmdq. ©

Metabo CAS 18V Skadis Sliding Wall Mount

Metabo CAS 18V Skadis Mount for Battery Packs This 3D-printed mount is designed to securely hold your Metabo CAS batteries on an IKEA Skadis pegboard Printing Details Orientation: Print flat, front side down. Supports: Required – organic…

Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu

Pobrania
77
Polubienia
15
Ocena
5
P
PrintablesTurbopstros

Victorinox Swiss Army Knife Hooks for IKEA SKADIS

Do your Victorinox Swiss Army knives currently live in a messy drawer, forgotten and unloved? Do they deserve a VIP spot where they can shine in all their multi-tool glory? Say hello to the Victorinox Swiss Army Knife Hooks for IKEA…

Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
69
Polubienia
20
Ocena
5
P
PrintablesKutte

Skadi Skull / Skadi Schädel

Skadi Model of Skadi’s Skull with Stand Collection: BadAssGodCollection (more in progress) Printed on: Prusa MK4 and Bambu P1S Material: PLA Scalable: Can be enlarged, but reducing the size is not recommended due to the delicate spikes.…

Wydruk około 6,32 €–7,72 € nettoWstępna wycena jednego wariantu

Pobrania
68
Polubienia
26
Ocena
5
P
PrintablesPointNemo

Skadis MK3S Steel Sheet Holder (Horizontal Version)

This is a horizontal version of Haymount's vertical holder.

Wydruk około 3,78 €–4,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
68
Polubienia
13
Ocena
0
P
PrintablesZAYn0nDER

IKEA Skadis Nintendo DS / DSi Game Holder

Tired of having no way to neatly store and Display your Nintendo DS / DSi Game Collection ? Then this easy Print is the solution for you. For the whole row you need 4x “DSGameStack” and 2x “DSGameStackshort” Or if you are using my Print…

Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu

Pobrania
68
Polubienia
10
Ocena
0
P
PrintablesHoenir15

Hue Bridge holder/mount for Ikea Skadis

I redesigned the wall mount for a Philips hue bridge fitting on the IKEA skadis punchwall. I made the walls quite thicker (2mm) to get a more stiff structure. Furthermore I made the skadis hooks a little bit smaller, so they fit more…

Wydruk około 2,56 €–3,12 € nettoWstępna wycena jednego wariantu

Pobrania
66
Polubienia
6
Ocena
0
P
PrintablesZenmaster33

Nextruder Hotend and Nozzle holder for Skadis

Description: I needed a storage solution for 1 extra Nextruder hotend and something to store spare/different Nextruder Nozzles. So I remixed the model of Relive93 to store 1 Hotend and 4 Nextruder Nozzles on a Skadis pegboard. Print…

Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu

Pobrania
59
Polubienia
16
Ocena
5
P
PrintablesAlex

Skadis Stiftehalter / Skadis Pencil Holder

Ein Stiftehalter für eure Skadisboards. Gedruckt mit einem Core One, mit PETG

Wydruk około 1,47 €–1,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
51
Polubienia
8
Ocena
0
P
PrintablesSebB

Prusa Spare sheet holder for IKEA SKADIS

Prusa Steel sheet holder for IKEA Skadis. Remix of a Remix, i only removed the MK3S writing on the lower right corner. Prints with supports Prints with MK4 Input shaper 0.20 Structural gcode and Prusa Slicer Project added Print on PEI…

Wydruk około 3,30 €–4,04 € nettoWstępna wycena jednego wariantu

Pobrania
50
Polubienia
11
Ocena
5
P
PrintablesTheCyberfreak

Floating Paper Boat with Magnet or for Skadis

A magnet can be embedded on this model so that you can hang it on the refrigerator, for example. The basic model was scaled to 150%. The magnet used is 5mm thick and has a diameter of 18mm. History 04.07.2022 IKEA Skadis-Version

Wydruk około 3,15 €–3,85 € nettoWstępna wycena jednego wariantu

Pobrania
41
Polubienia
13
Ocena
5
P
Printablestino14270

support ebavureur skadis ikea

comme d'autre model de mon compte petit support Ikea skadis pour ébavureur pratique et rapide a faire

Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu

Pobrania
41
Polubienia
11
Ocena
0
P
PrintablesDirkHoefle

Skadis Aldi Power Distributor

Mounts the current Aldi Power Distributor to a IKEA Skadis Wall. Modell is fixed, the mounting holes a off center now to move the distributor dead center. You need 2 additional M3 Screws and 4 Nuts to counter.

Wydruk około 1,57 €–1,91 € nettoWstępna wycena jednego wariantu

Pobrania
38
Polubienia
7
Ocena
0
P
PrintablesScared__Bunny

Bernina XL Spool Skadis Holder

Takes about 5 XL Bernina Spools and is for the Skadis System. Print with some support, and I used a modifier to increase the strength and maybe the lifetime. I printed in simple PLA, Petg and abs etc. should also work.

Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu

Pobrania
38
Polubienia
9
Ocena
0
P
Printablestino14270

support skadis pour outils

support skadis Ikea pour petit tourne vis scalpel lame cutter pince boite

Wydruk około 4,92 €–6,02 € nettoWstępna wycena jednego wariantu

Pobrania
34
Polubienia
3
Ocena
0
P
Printablesdick

Skadis T-Nut mount for Molex Hand Crimp Tool

This is a mount for holding a Molex Hand Crimp Tool on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports are…

Wydruk około 1,51 €–1,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
30
Polubienia
5
Ocena
0
P
Printablesmaxwxyz

Sewing Thread and PFAFF Bobbin Holder for IKEA Skadis

Sewing Thread and Bobbin Pin Holder for IKEA Skadis Adjusted to fit larger diameter but shorter bobbins used in PFAFF sewing machines, compatible with Pfaff 1469 1471 1472 1473 1475 1475CD 1520 Select 3.0 1069 6250 6270 Creative 2134

Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesMnemorath

Benchy mount for Skadis w/ Swatch holder

I couldn't find a good Benchy mount for Skadis that I could have a Swatch Card with, so I made one by combining a few designs. I liked the card design of Filament Swatch Remix by Yimir especially since it includes an editable file that I…

Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu

Pobrania
26
Polubienia
1
Ocena
0
P
Printablesannki

Ikea Skadis Decoration Pride & Bi Rainbow

For Ikeas Skadis here is a small decorative Pin/Insert in a rainbow form, either the pride flag or the bisexual flag or any other three striped flag. Because I don’t have access to multiple colors of filament or a printer to use multiple…

Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu

Pobrania
23
Polubienia
15
Ocena
0
P
PrintablesW&H

Ikea skadis big dice (d6) holder

Big d6 dice holder for Ikea Skadis. Max length and width of dice: 27 mm. Supports: Yes, for Skadis attachment Filament: In my case Prusament PLA Vanilla white

Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu

Pobrania
21
Polubienia
6
Ocena
0
P
Printablestino14270

support outillage skadis Ikea

support skadis pour ranger tous plein de petit matériel

Wydruk około 6,30 €–7,69 € nettoWstępna wycena jednego wariantu

Pobrania
21
Polubienia
4
Ocena
0
P
PrintablesFatality

Skadis Duro (Aldi) Magnetschiene

Skadis Duro (Aldi) Magnetschiene

Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesMiquel

Ikea Skadis Three Bottle Holder (2x 37 mm/100 ml/AK + 1x 33mm/60ml/AK)

Strong bottle holder for Ikea's Skadis peg system. Holds three bottles: 2x of 37 mm diameter (like AK's 100 ml bottles). 1x of 33 mm diameter (like AK's 60 ml bottles). Uses six pegs for better strength. How to print: Print on the side…

Wydruk około 4,03 €–4,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
18
Polubienia
3
Ocena
5
P
PrintablesGrogg3D

Curver "Ready to Collect" Bin Mount for Ikea Skadis Board [2 variants]

The Curver (brand) "Ready to Collect" bin comes with a mount plate but it's for screw mounting to a wall or other vertical surface This is my Ikea Skadis version of the same mount. It has reinforced Skadis mount hooks (my 5x5mm versions)…

Wydruk około 3,24 €–3,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
18
Polubienia
2
Ocena
0
P
Printablesc.dunjr

Sparx Screwdriver Skadis Holder

Skadis holder for the screwdriver that comes with the Sparx skate sharpener Uses the T-clip system by Line Arc Line

Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu

Pobrania
17
Polubienia
3
Ocena
0
P
Printablesdick

Skadis T-Nut ring with 18mm inner diameter

This is a horizontal ring with an inner diameter of 18mm for mounting on the IKEA Skadis board. The included freecad file should be parametric enough to create any other sizes required. I use it to secure the end of a digital caliper, to…

Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
17
Polubienia
5
Ocena
0
P
PrintablesMilan Stehlík

Skadis Ikea - MADMONQ holder

Tisk z PLA, 0,2mm, podpěry organické jen na tiskovém plátu.

Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
4
Ocena
0
P
PrintablesF3DX

SKADIS - KRANZLE

KRANZLE Logo: Printed face down on the build plate, I used supports for the hooks. Note: I printed it with an MMU3, but you can change the colors manually. Supports nozzle: Robabuse 0.42 Vario-jet support 0.42

Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
14
Polubienia
7
Ocena
0
P
PrintablesMath

Bosch Ratcheting Screwdriver mount for Skadis

Remix for a Bosch Ratcheting Screwdriver (Bit-Ratschenschraubendreher) with 12 bits that attaches to the IKEA Skadis. The through-hole is 10mm in diameter and the body of the mount was stretched in order to accommodate the 40mm diameter…

Wydruk około 0,82 €–1,01 € nettoWstępna wycena jednego wariantu

Pobrania
13
Polubienia
3
Ocena
0
P
PrintablesThePes76

Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesPeter

Short dart Skadis mount 12x5

instructions: separate objects → set upright → print with organic supports on the skadis hooks only. 15% infill.

Wydruk około 13,04 €–15,94 € nettoWstępna wycena jednego wariantu

Pobrania
10
Polubienia
12
Ocena
0
P
PrintablesHenklem

Sriracha Sauce Mount for Skadis Board

This mount for an IKEA Skadis board was designed to make Sriracha sauce quickly accessible. Support structures are needed in between the two rings but nowhere else.

Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu

Pobrania
5
Polubienia
4
Ocena
0
P
Printables3dPeter

Polar H10 - Skadis - dual half

I've made a second shelf so you can store two sensors. Printed on the back side not using supports supports. PETG E-sun

Wydruk około 4,37 €–5,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesPrintuin

Skadis Mount Collection

First part of my skadis collection. Mainly mounts for printer tools. I will upload more over time. Comment if you have optimization ideas or change requests. The files for the kitchen roll holder are here . Most created by myself, but…

Pobrania
43 120
Polubienia
15 803
Ocena
4,81
P
PrintablesJohination

IKEA Skadis

Remix mit Bohrlöcher für Wandmontage

Pobrania
33 283
Polubienia
4567
Ocena
4,76
P
PrintablesLine Arc Line

Skadis T-Clip System

I have been fascinated recently by the ways that the 3D printing community has devised to attach printed parts to IKEA Skadis board. Skadis slots enable 3D-printed parts to attach much more securely and reliably than the holes in regular…

Pobrania
25 751
Polubienia
3476
Ocena
4,99
P
Printablessdgsean

Ikea Skadis Shelf / Tray

Different sized shelves / trays for your Ikea Skadis wall. 1 Extra Long or 2 Extra small shelves will fully span a 36cm wide panel. (The Extra Long may be beyond most printer beds). To get the 2 Extra Smalls to span the distance, you'll…

Pobrania
19 685
Polubienia
3659
Ocena
4,9
P
Printables6d6178

Skadis T-Nuts Mounting System for Ikea Skadis Pegboards

These are T-Nuts for IKEA SKÅDIS pegboards that make installing accessories on your pegboard much easier . You no longer have to design custom mounting hooks into your part. All you need is holes and alignment guides. The T-Nuts come in…

Pobrania
16 191
Polubienia
3552
Ocena
4,93
P
PrintablesLine Arc Line

Parametric SKADIS Board Generator

I saw a few models on here for printable SKADIS pegboard and I love the idea. However, many of the models were dimensioned wrong for my printer or intended purpose. I decided to make a simple to edit, parametric file for generating…

Pobrania
14 485
Polubienia
2824
Ocena
4,96
P
PrintablesKim-Janosch

Skadis/ SKÅDIS universal peg

UNIVERSAL PEG FOR IKEA SKÅDIS – one peg for my whole organizer system This peg is the mounting system for all my SKÅDIS holders and organizers. The holders are designed around it, so they print without supports and their entire back sits…

Pobrania
14 079
Polubienia
1098
Ocena
4,86
P
PrintablesKilian

IKEA SKÅDIS / SKADIS Hooks

These are hooks for the IKEA SKÅDIS boards. Unlike others I have seen these are made to snap in to the board and won't come loose or wiggle around. I am making models with different hook lengths available here, from 10 mm to 50 mm in 5 mm…

Pobrania
12 892
Polubienia
2335
Ocena
4,89
P
PrintablesJonasTae

IKEA Skadis Wall Mount

Screw: diameter: up to 6mm length: 30mm or more

Pobrania
12 456
Polubienia
3013
Ocena
4,96
P
PrintablesJonas Pedrotti

Skadis Tool Mount Collection

This is a collection of tool holders, where the focus lies on quick access. Almost all prints can be printed without supports. I will add more tool mounts in the future and update them here. Latest Update: 10.08.21 A few models are…

Pobrania
12 408
Polubienia
2789
Ocena
4,78
P
PrintablesClay2F

IKEA Skadis

EN: Since I wanted to construct various holders and test them before printing, I created the hole pattern of the Skadis walls from Ikea as a step file. DE: Da ich mir diverse Halter konstruieren und vor dem Druck prüfen wollte, habe ich…

Pobrania
12 122
Polubienia
1671
Ocena
4,91
P
PrintablesFabber

IKEA Skadis Hook

Description A hook designed for the IKEA skadis pegboard. Perfect for keys, face masks and other small things to hang up. You can scale the width of the hook up or down to get a tighter or looser fit with the pegboard. Parameter: 0.2 mm…

Pobrania
10 727
Polubienia
1454
Ocena
4,88
P
Printablesgimpelginster

Modular Skadis Container System (S)

These are some small skadis containers in different lengths. One container is one solid part. Neither do they require any separate hooks nor supports while printing. If you need some more space, you could print the Modular Skadis…

Pobrania
10 422
Polubienia
3827
Ocena
4,93
P
Printablessdgsean

Ikea Skadis Bin

Different sized bins for your Ikea Skadis wall in Small, Medium and Long. The small closely resembles the size of the stock bin from Ikea, the Medium and Long are roughly 2x and 3x wide, respectively. I printed mine with a 0.6mm nozzle…

Pobrania
10 155
Polubienia
1853
Ocena
4,91
P
Printablesalecs.form

Filament Spool Holder for IKEA SKADIS

This set of holders for filament spools can be mounted to the popular IKEA SKADIS pegboard. In order to hold one spool there are always a left and a right part which belong together. By selecting the appropiate distance (=holes) between…

Pobrania
10 046
Polubienia
5234
Ocena
4,84
P
PrintablesPavel

IKEA SKADIS hook collection - kolekce háčků

Collection of hooks for IKEA SKADIS board - slightly reinforced thickness and tight fit. Hooks from 15 to 65mm Kolekce háčků pro IKEA SKADIS desku - lehce zesílené a pevně padnoucí. Háčky délky 15-65 mm Print instructions No supports…

Pobrania
8680
Polubienia
1118
Ocena
4,63
P
PrintablesSoarpix

IKEA skadis/SKÅDIS accessories PACK

IKEA skadis/SKÅDIS accessories PACK This is my skådis accessories, hooks and holders. I use dual pegs because I want the hooks and holders to sit firmly on the pegboard and don't move around when I take a tool. I have separated the peg…

Pobrania
8466
Polubienia
2185
Ocena
4,87