Sennheiser G2/G3/G4 Lavalier Hardmount Slotted wide holes
A small adaption to the
Wydruk około 1,28 €–1,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 99
- Polubienia
- 17
- Ocena
- 0
301 modeli
A small adaption to the
Wydruk około 1,28 €–1,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is: Christmas Decoration - Slotted 2 Piece Christmas Tree. Fast and easy 1 color print. You can adjust the scale as desired, but be mindful not to make it too thin. When adjusting the thickness , be sure to set the Negative Part…
This print is to allow hanging brushes etc on the honeycomb storage wall .
I found K2_Kevin's Pencil, Pen, Marker Holder for Honeycomb Hex Wall . I liked it but I didn't want my pens falling over (I'm like that, don't judge me ROFL). So made it solid and put in some hex channels to put the pens in. It came…
Added a slot to the rear notched vent to provide relief for the filament tube. While running PET-CF the filament broke due to a tight bend in the tube. This modification helps prevent filament breakage, especially with brittle materials,…
This knob fits a 6mm potentiometer with a slotted actuator. Why yet another design? This design uses grip fins and a rib to prevent slipping and has a nice press fit that is tolerant to variations in print quality. I also include Step and…
This model takes the original K9 head and slots a hole to fit standard Dummy 13 accessories in the “mouth”. Prints without supports. Print flat on the “top” of the head (i.e. the side with the ears). The 3MF is laid out correctly.
Just a bracket that I made for a shelf in my closet. Can be printed on the edge at 45° to help with strength. Should be able to scale to your needs. Holes are d=5mm Edit: Added a 20mm version to be used with 2020 aluminium extrusion,…
This is a set of square and rectangular bases, with and without slots, compatible with Warhammer Fantasy miniatures from the 1980s to early 2000s. The bases are solid, so the thickness of the top and sides of the base should be set in the…
200mm x 200mm sieves slotted sieves ranging from 1mm to 5mm Frame to hold sieves can be found here: https://www.printables.com/model/996803-200mm-sieve-frame/files
200mm x 200mm slotted sieve. Slotted sieves ranging from 6mm to 10mm. Frame to hold sieves can be found here: https://www.printables.com/model/996803-200mm-sieve-frame/files
Variations of a clamp with different widths that can be pushed onto a DIN rail. The clamp has slots to attach various things to it. This should be printed twice to attach an power suppply to a DIN rail.
More Remix Notes: This is of course based off of the very cool: SE3D Elegoo Centauri Carbon Toolhead Cover UPDATE: Please consider downloading this other, latest remix, it is what I was going for initially and the fan mounting is SO MUCH…
I was looking for a filament guide much like what @clivebradshaw had created. However, I wanted mine to be slotted to restrict movement along the Y-axis, but still have enough range along the X-axis to feed the extruder. My slot idea is…
Źródło oznaczyło ten model jako treść 18+.
A collection of Headless Slotted screws according to ISO 724 , ranging in sizes from M2 to M12, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75 mm, 80…
Slice with a colour change at 1.00mm so the numbers are easier to read. Marked in 1 degree incrments. The slots make it easier to see the angle when measuring a physical object that is shorter than the radius of the protractor. Also, you…
An FDM printed spatula for use on FEP film on SLA printers. v1 Print instructions Intended to be printed in PETG at 0.1mm layer height on smooth PEI.
This is a simple wall mount adapter designed for Adafruit's 2020 Aluminum Extrusion. Designed in Autodesk's Fusion 360. I'm using the extrusion to hang a few of my hats on my wall. STL of the extrusion profile is included for TinkerCAD…
This 3D-printable cable tray is designed for effective cable management in DIY CNC electronics enclosures, workbenches, or general wiring setups. It features a compact design and easy-access slots for organized cable routing. Features: ✅…
As above, made a mod to the normal z-belt cover for the Voron 2.4 so you can run wires down into the electronics compartment. Great for hiding things like wiring from case lighting or a camera. Included mirrored .stls so you can use on…
Print Settings: Printer: Prusa MK2S+ Filament: PETG or PLA Tested with PETG Layer Hight: 0.3 Infill: 5%-10% Rectilinear Exterior Perimeters: 2 Brim: No Heated Bed: Recommended Supports: No Approximated Filament Usage: 11.79m Approximated…
Instead of paying $25 for “Pro” slotted cups from Click & Grow, designed my own replacement to use with ¼" wicking cord. The design has both a 1pc and 2pc design. I started with the 2pc design so it would be easier to feed the wicking…
Are you ready to experience the next level of gaming convenience? Introducing the phenomenal Wall Mount Bracket Remix for the Nintendo Switch! Brace yourself for a description that will make your heart race, your palms sweat, and your…
Rear riser with all venting modeling removed. Added a passthrough slot for the PTFE tube. I printed with tree (slim) support on plate only.
This is a remix of Penobscot's outstanding iPhone mount design. I added v-slots to the mount and v-posts to the back of the phone holder to allow for rigid assembly. With supports, I was able to print a great looking 2-piece assembly with…
This T-Nut is of the perfect size for your ENDER 3 TIP: Make sure your print bed is well leveled or the print may fail and create a noodle. Note: You need a 5M Nut to be slotted into this print. Happy Printing;D
A Hadley remix for the secondary holder - The secondary bolt and washer are added via a slot without any need to consider the mirror - so you can glue the mirror in place any time you like. There is also no chance of backing out the…
Offcenterness of the original, was a bit of a thorn in my eye. So I removed it. This way it can be printed without support. First version, I only took out the front. But most of the other inserts I used were sticking out a bit. In version…
This is a 3 piece slotted blank panel for server racks. It is 19 inches long when all parts are together. It is split into three pieces to allow printing on a wide variety of bed sizes. HOW TO PRINT: Layer Height: 0.2 mm Supports: No…
I've remixed brett ‘s HSW brush holder design to accommodate larger tools with slotted handles, which the original size couldn't hold. I'm a big fan of his work, and I hope that my modifications will be useful to others in the 3D printing…
Silica Gel Desiccant Box for Sunlu S2 Filament Dryer [Slotted Holes Remix]
These screws are inspired by DIN 964 slotted raised countersunk head screws. The longer screws have partial threads. My inproved thread design has an accuracy of 2.5µm and should fit without tolerances. Please print with low layer height,…
Width, depth and lip height are parameterized to an extent. The width of the hex post is also parameterized if you need a tighter fit. Designed to be mounted using 2 HSW empty inserts Be sure to hit like and post your makes!
This is a lightweight(under 15 grams) PTFE disconnect which uses (2) 6mmx3mm rare earth magnets(some measure 2.7 mm thick while others measure 3mm thick - measure your magnets - two designs are available below)and (2) PC4M10 neumatic…
I remixed this nut in order to only have a 5.0mm DIA hole which is then tapped to M6 thread to have a 100% plastic part. If you already have a tap kit available, and don't want any steel in your part, this could be a better option than…
I wanted an M4 version of the spider without captured nuts. I am not a fan of capturing hardware in models unless I really have to. I created this spider from scratch in Fusion360 (not just a simple mesh adjust) and added M4 metric holes.…
A tool designed specifically for installation and removal of any threaded MultiPoint with Slots for MultiBoard. This includes a Snap-mounted holder which fits the tool nicely and allows neat storage of the tool on your MultiBoard. Print…
I designed this to replace a worn-out cardboard crayon box, at my wife's request. It's internally ribbed to keep each crayon in its own slot as opposed to falling over into adjacent slots. The crayons around our house fit loosely enough,…
I got tired of throwing out the last little bit of food at the bottom of the bag because I couldn't sift it out from the crumbs. Volume is 1 Cup with a line at the half cup mark for easy measuring. I've made options for a German Shepherd…
I tried using PREMIUMTEA's excellent remix of Gizzle's mount but discovered that my DIN Rail is not U-shaped, but slotted creating top and bottom channels that require a longer bracket slot. Since I had 10 METERS of the stuff, I figured I…
Summary says it all! File Details Fusion 360 file has parameters for the tube size and slot size STEP file also provided because why not ¯\_(ツ)_/¯ Prints just fine with 0.3mm layer height since it's not going to be seen anyway Happy…
New and Improved Double-Slotted Toothpaste Tube Squeezer tool to flatten out the tube!! This is a GAME CHANGER!! Having two slots allows you to tuck the tail of tube away and use the double-Slotted Toothpaste squeezer to get the best…
Update 15 Sep 2022: Matt C. has fixed some mesh errors in the original print and allowed me to add his fixed stl to this file. His original fix is here if you want to like that too. Thanks Matt! A door for Fantasy Flight's lovely Imperial…
Printed in PETG flat on face at .2 layer height. Printed and tested on an old Marquee sign, and they work great. (Make sure you print in something weather and heat resistant. ABS or ASA would probably work better, but PETG seems to be…
This is a 120mm fan grill with slotted design. The mesh is offset from the fan blades to prevent unwanted noise. You could try to print the four recessed corners without support material if your bridging is good enough. Otherwise, using…
This is a demonstration model of a mechanical seven segment numeric display. Background and full build instructions are available at: https://keveney.com/posts/slotted-mechanical-seven-segment-display/
Drip tray for DeLonghi Dedica with extra drainage slots.
I didn't want captured nuts as it requires pausing the print partway through. I plan to make several of these so it helps to save time during the printing process. Other spiders with slots exist, but only for the metric remixes. This one…
I saw the mesh wasn't quite right so I've tried to fix it. Prints upsidedown, May require a few supports for the details sticking out the door
Clean, easy to print top glass riser tested on both P1P and P1S. Added vented slots and a mount in the left inside corner that I use for a camera, can be about anything I expet. Amazon.com : YI Home Security Camera, 1080p 2.4G WiFi IP…
What is this? A double-slotted RAM Mount for a Size B 1" ball, for attaching to multiple accessories that use M5-threaded holes and adjust their position via the slots. Attaching The slots are for M5 bolts. Use M5 bolts to attach your…
I could not find a good free model of a phone mount cubby insert for my Ford Maverick so I designed my own using the 3-D scan data uploaded by https://www.printables.com/@jalcober_222386 . Print face down using PETG or other high…
Added an open slot to Gazorpa's very handy Super Strong Ceiling Hook. Obviously, not as strong as the original but it works for my intended use of mounting a spring on a cheap screen door. Print Settings Printer Brand: Creality Printer:…
There was recently a promotion at a discount store for a set of Parkway screwdrivers. To make sure they find their place on my Ikea Skadis wall, I created these two holders, which provide enough space for the slotted screwdrivers and…
Up to 4 Belts. Easily slot belts in and out. Hangs on a clothes rack with belts facing forward for easy access.
Pad to adapt my Liftmaster 2.5 Ton Low Profile Jack to the frame rails on my Nissan 350z https://www.amazon.com/dp/B07KPN94VM Print Settings Rafts: No Supports: Yes **Infill:** 100 Filament: Overture PETG Red Category: Tools
A small slotted scoop for removing failed print parts from a resin vat. Scoop is 42mm across the front. The front edge is angled to help lift material away from the FEP sheet. Slots are somewhat less than 1.5mm across.
I was looking for an increased printer cover for my K1 and decided on the slotted version from Joe Cooper. After printing the parts with ABS, I noticed a lot of warping on the contact surface of the parts. As a result, the outer edges…
A door for Fantasy Flight's Imperial Assault board game, set in the Star Wars universe. You can slide the game's cardboard door token in this model's slot and use it in your game. There is also a multi-part version that allows one to…
Fully 3d printed stylin' and profilin' glasses. Offer zero UV protection so try to not stare directly into the sun while wearing these. For aesthetics only. Print Settings Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.2 Infill:…
I printed with one plate on a1 mini by just cutting in half then printing. Worked well. 3mf print profile and photo included.
I made this to be a now playing vinyl stand for my records, but it can be used for whatever you want to display. It is sturdy. It is printed in 2 parts that slot together to make the stand. I printed mine with multiple color changes to…
This lamp (a mix of laser cutting and 3D printed parts) started as an idea one day when playing with a scad script to create slot patterns in 1/8" wood with my laser cutter. I liked how the slotted wood allowed slits of light to shine…
After playing with the single slotted mission holders (which are excellent), I took a few minutes to mock up a double slotted holder for when we want to send two leaders on a mission. Works great, easy to print.
My carriage back was a bit warped after a blob of death so I wanted to print a new one in ASA but avoid rewiring my whole printer. There were a few options available but I wanted one that preserved the overall shape in the areas that…
This mod replaces the mounting holes with a mounting slot for added flexibility in placement on a DIN rail. Intended to be used with standard M3 hardware and the DIN clip from here .
I needed a modern soap dish for our shower. It has large slots to easily drain water. The feet and body print separately so you don' need any print supports. I used CA glue to glue the feet to the body.
A stubby nozzle for the Dewalt DCBL777 & DCBL772 Flexvolt 60v leaf blower. Great for drying a car or cleaning out tight spaces. Print as oriented with at least 3 walls for strength. No supports needed. Also available with a round opening…
Remix of slotted filament guide and clip with PRUSA inlay
This is a remix of the very cool breadboard storage inlay by Svensson2584. I had a few ideas how to improve it, i didn't like the idea to cut up the male slot pieces on the breadboards, so i made a version with slots for them. There is…
I modified the file in PrusaSlicer, so I could attack the tool bag in the down tube of my bike.
M5 Dowel (Remixed) for Magic Arm/Articulated Arm Hanger This M5 dowel is a remix specifically designed for use with Magic Arm/Articulated arm hanger . I modified the original design to be a slotted shape instead of a circle, which…
The Prusa button competition reminded me I had some broken buttons that needed replacing so made this with a gap in the bar so you can push onto the existing thread without needing to replace it.
The complete set of Stemfie3D slotted symmetric braces. get.stemfie.org x.com/stemfie3d
This was the original, really. It's a non-slotted version of the FEP scraper/spatula/putty knife I use. Some people may want the extra body for scraping build plates like a 500lb gorilla :)
This is a bracket to attach a USA license plate to cars that use two screws to mount the bracket by the center. This will work for screws spaced as little as 7inch up to 10 and 3/4 inch.
a remix with slot (1.8mm) with minimal support needed.
Instead of screwing right through the top hole, screw in the screw first (I recommend a replacement M3x10/12) and leave a gap for the slot in the shute. the screw at the bottom aswell as the top slot, It holds in place pretty well.
This is the scraper I now print for vat cleaning. It is slotted for catching floaties in the resin so you don't damage your FEP. Not really ideal for the bed, but it can be used for it in a pinch. Model superceded by fully unlabelled…
This is a system to mount things using screws on slotted mdf boards. Print instructions Screw_holder2.stl: Normal fit, gap 11 mm, internal slot front 30 mm, internal slot back 31 mm Screw_holder_loose.stl: Loose fit, 1 mm less from the…
Gridfinity generic tray with 6 slots with finger cutout 2x4x0.5. Good for storing small tools like tweezers, screwdrivers or even small knippers and pliers.
Slotted lid raiser for k1/k1c corner piece for feeding filament from the side
A simple wall mounted driver organizer with hidden mounting hardware.
Simple plug that mimics a screw for devices that hang with a slot in the back. Not sure how much weight it can hold due to being printed vertically, but it seems pretty strong since it's short. Hung my outdoor wireless thermometer instead…
wanted some slots for the rear Betweener so remixed and added slots
Creality K1 Right Rear Slotted Lid Riser with Opening for Bowden Tube opening.
FreeCAD source codes are parametric.
Slotted Lid for a Wide-Mouth Mason Jar Insert. Fits into the lid ring in place of the regulkar sealing lid. Allows for standard-sized tickets to be inserted, while keeping jar closed from anyone reaching in (or folded pieces of paper,…
This module is 1x3 sections big and fits seamlessly along the other modules. Print rightside up with no supports. The two bigger slots are meant for phones up to 13 mm thickness. The other slots can be used for cards/notes/paper
Modified GuilianoM's double fan skirt to match my Doomcube build, which uses the Slotted skirts.
Slight variation for the amazing case by @Stanley_97458 to fit my personal needs. Removed XT60 ports Added port for a barrel plug (input) Replaced 2mm front terminal ports with a barrel plug Added slotted ventilation holes Added cutouts…
Slotted fan cover design for a 40mm x 40mm fan, commonly found as a cooling fan on 3D Printers (ex. Ender 3 Pro). Features slots arrayed horizontally for an aesthetic look; 1.5mm thick struts spaced 3mm apart. Slots are sunken in on one…
Summary FlexLinks were developed for quick turn-around proof-of-concept prototyping of compliant mechanisms by the BYU Compliant Mechanism Research Group. Combined with commercially available toys, custom compliant components can be used…
Added a slot for US currency, and maybe others. Remixed from https://www.thingiverse.com/thing:3198221 where you can find the rest of the model. Category: Models
This is the adjustable sliding slotted fastener mount thing for a Tushy Classic/Basic 2.0 bidet. There should be two, but if you're missing one, you can use this to keep things from sliding around.
Slotted Planter Size : ~ D150x130 Happy printing! Please check also my other designs. If you would like to support new product development or obtain commercial license for my designs, you can do it here: https://patreon.com/TychoDesign
USE VERSION 2 Slot is larger - the original screw will now fit . Support only needed “build plate only” Holes and slots have printed fine without supports. Version 2 was printed on a Bambu P1S. Only the slanted side slot needed a little…
Shortened the original model and made the rack mounts slotted to allow some wiggle room.