115 modeli
This is a cold shoe to SmallRig 1/4" adapter , designed to let you securely attach any cold shoe accessory (like microphones, lights, or monitors) to your SmallRig rig or other equipment with a 1/4” screw mount. The design is compact,…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Minimum settings for fastest print !Very fragile! 0.3 layer height 2 walls 2 top&bottom layers 10%infill (i used Cross Hatch)
This is a tool less replacement adapter of the SSD caddy of the Atomos Ninja V. No screws or tools are needed in order to use your SSD with your Atomos. Also included is the clip (you have to print two of them) for the Smallrig 2209 cage…
Scan of a Smallrig Sony ZVE10 Camera Cage for reengineering Important: The 3D Print Resolution Version is for this camera handle : https://www.printables.com/model/1134961-smallrig-camera-handle-with-hot-shoe-adapter
This model is designed to fit the NATO rail and use a 3/8"-16 to firmly secure it to the camera cage This can be fully printed without any supports. The screw installs loosely into the camera cage first, then the handle slides in and then…
Similar to the Smallrig Mini Side Handle . Required hardware: (2) M4x18mm socket head screws (2) M4x6mm heat inserts (2) 1/4"-20x10mm thumbscrews
THIS DOES NOT FIT THE A6500 due to the larger grip. This is a sculpted handle for the Smallrig a6500 cage (fits a6000, a6300, a6400) that fits 3 fingers and allows your index finger to comfortably manipulate the power, shutter, and C1…
[EDIT 13.5.2024] added new model for even larger lenses and fingers. 3d printed Handgrip for Smallrig CCS2310 2310 cage. Tested with Sony a6400, may work with 6100 and 6300, but I haven't tested. Won't fit a6500. This is V2 version of…
I designed this clamp to reduce stress to the HDMI- and USB-connectors while using the camera connected to monitor or capture card. In addition to keeping the connectors in place, cables can be tied to the clamp body. This was designed…
Needed this model for test fitting inside of this project: iPhone 15 Pro USB Hub Purchased them here: https://amzn.to/3FvPBGA
Simplified model of a remix. Reduced file size by 125x. The original STL is 250 mb, and the new STL is 1734kb. Also included a 3mf file. I made mine with a resin printer (Elegoo Mars 3 Pro) using Elegoo's ABS Like resin Originally found…
This model can be printed without support, mirrored for the other side. I used 2 P1/4"-20 to attach it to the camera
Smallrig Camera Handle. Dies ist das Model mit einem Hot Shoe Adapter.
Printed at 45 degrees with tree supports in PETG. Like in the original model, transmitter needs a hole drilled in the enclosure and the inner part installed inside (using the 2xM3 bolts as in original seems excessive, as the inner part…
Pentax 100 SDUF is a classical imaging telescope, however, with the helical focuser that I detested. The default gear of Smallrig mini follow focus 3010 is 0.8 mode with 43 teeth, by adding the follow focus to Penatx 100 & changing its…
Light and easy to print case for 20x gobo set and a gobo template
A really strong way to mount basically anything to your Radiomaster pocket using a Smallrig magic arm. Disassemble your radio. Slide the Outer Bracket onto the module bay on the rear of the radios frame. Use an M5 bolt to secure the Inner…
As I said, mattebox doesn't come with 52mm filter thread, smallest one is 67mm I think. Anyways, it works and now I can use my lens wide open
*** Please compare your SmallRig Cage for Sony Alpha 6000 with the one in the images, there are different versions! *** I used ‘Fuzzy Skin’-Modifier in PrusaSlicer to achive a more grip surface texture. If you wanna add your own modifiers…
Needed a extra hot shoe for my Sony A6300 SmallRig, to mount my shotgun microphone and camera light. made a small tilt in to the mount to point the light more to the direction of the lens. Print as it is. I used 40% infill and 2 walls. M6…
This is a light diffuser for the SmallRig P96L RGB light. Here are the print settings: Layer height: 0.2mm Filament: White PLA Top shell layers: 1 Top shell thickness: 0mm (Change to a higher value for less light passthrough) Bottom shell…
81mm 80mm 85mm
A Scan of a Smallrig ZVE1 Cage for reengineering
I used a Smallrig ¼" screw to mount the adapter to the Handle. The top and front could-shoe-mount's are not blocked as you can see in the pictures. Version 2 have a little ‘nose’ to prevent it from twisting Just print it upside down with…
3d printed Handgrip for Smallrig CCS2310 2310 cage. Tested with Sony a6400, may work with 6100 and 6300, but I haven't tested. Won't fit a6500. Version of the grip for larger lenses This is designed to be printed using CURA with Fuzzy…
Lens support compatible with SmallRig 1784 universal lens support. The original part was too short for me.
This is a hard case for storing the SmallRig P96L RGB light. I printed this with: Filament: Overture PETG Bed temp: 80C Nozzle temp: 240C Infill: 10% Layer height: .2mm Print with the flat sides down. I did not use any support or bed…
For anyone with my VERY specific use case. If you happen to use: Sony ZV-1 camera, SmallRig Cage and dummy battery you might got annoyed that there is no way to protect battery door without filing camera body or disassembling the door…
The stock mount that comes on a Smallrig CVG2320 is too big for the GoPro Light Mod and off-center for some reason. This fixes those two issues. Simple to print, basic settings should work fine. Uses the screws that came with the cage:…
Small Rig Magic Arm cable clips designed to tidy up and manage your cables. Designed to clip onto an 11.8mm tube of the Small Rig KBUM2732 Adjustable Friction Power Articulating Magic Arm.
Adapter to fill the gap when using a Sandisk Extreme SSD. There are two versions of this drive from what I know though. I tried to modify another file that was for adapting the T7, but since this has a weird angle, I ended up having to…
This is a light former for the SmallRig RM75 LED pocket-light, that restricts the emitted light to be a little more focused. The case sits perfectly snug and has a little ridge that snaps at the rear part of the light. There is no rattle.…
This holds a Tentacle Sync E inside the stich line making it invisible when shooting 360. I was tired of using velcro, and Habr had made a very nice case , so I moved the shoe where it needed to be and added small bump stops to make it…
This is a redesign of the “PRO FLASH MOUNT” for the GOODMAN ZONE, which now fits a SMALLRIGH Cold Shoe 1241 properly, and also still has the bubble level. The Sides have also been shortened a bit, so that you can pass bungee cord from the…
This is a handle that we designed to use at CES for verticle video content! You will need an M4 threaded insert, a soldiering iron to insert it, and two ¼-20 machine screws. We would not recommend printing this in PLA, only ABS or PETG.…
Based on Smallrig cheese plate 1681 by Mikhail Shulman Fixed minor geometry at one corner that i feel somewhat asymmetrical 1mm fillet on the sides
This shockmount was created to fit the Boya mini shotgun mic and similars, and interface with the Small Rig mini top handle. It interacts with the coldshoe lock for easy and safe removal. It is a modification of my other design…
I've made an insert for the Falcam f38 plate & CSS hub mounted on the Smallrig Grip for an Nikon Zf camera. It fills the open space on the Smallrig grip so the mounting plates sits level against the camera. It also makes positioning…
A left hand grip you can mount on the smallrig L-bracket for the sony a7iii. Provides a symmetrical grip on the camera.
You can fit Apple Airtag in the SmallRig L-Bracket for Sony A7C (3089) with this model.
Designed it for Smallrig phone holder
Another camera clip holder as the existing ones did not fit my old backpack and smallrig plate on the camera. The camera easily slides in from the side and can be released quickly. It holds onto the plastic clip of the chest strap and is…
Shields the USB-cable from impact and movement which may damage the fragile USB-C connector on the BMPCC 4K electronics board. Only suitable for angled USB connectors. The XLR connector is sadly covered, but the AC connector is still…
Attach to the Smallrig 2791B cage by using the M3 threaded holes on the front of the cage (note that phone mount slider must be shifted by one hole to the left). The lower hole on the clamp requires one M3×5×4 heat set insert (see photo…
A grid for the video light SmallRig RM75. It includes metal washers that will attach to the RM75’s magnets to hold it in place. The top controls of the RM75 remain fully accessible. Also, the thread on the bottom side remains accessible.…
I wanted to mount a screen on my Skadis. But I couldn't find any reliable 3D printed swivel solution (I need the screen to be adjustable). Instead of trying to come up with a 3D design, I opted for a reasonably priced Ball Joint module…
GoPro mount for Canon R5C smallrig cage to use GoPro as Gyro logger for stabilizing footage in software like Gyroflow. compatible cage: https://www.smallrig.com/smallrig-black-mamba-camera-cage-for-canon-eos-r5-c-3890.html Printed in PETG…
This adapter will allow you to mount your Nanlite light modifiers on SmallRig RC COB lights such as the RC60B or the RC100B. Features Sturdy design optimized for FDM printing Minimal mount distance offset Lock ring with trapezoidal…
Hi, I got a Smallrig Selection tripod, which already seemed sturdy enough for using with the OG star tracker. But I was worried, that the default ¼" stationary part wouldn't be enough, because had problems with the 3d printed threads…
Vesa mount spacer with a perpendicular post for SMALLRIG clamp
Ein einfaches Gridfinity Modell für die Sony A7IV mit Aussparung für die Smallrig Verlängerung sowie einem Peak-Design Clip Das Modell wurde auf Ebene 2 farbig gedruckt, kann aber je nach Filament Auswahl auch einfach gedruckt werden.
A special shockmount for Boya and Rode mini shotgun mics, to mount in the Smallrig mini top handle ARRI 3/8 connection. The Idea is to lower the profile of the camera by putting the mic at the same high of the top handle. It was inspired…
can be printed as is w/o supports.
NOTE: New version here: https://www.printables.com/model/967009 Shields the USB-cable from impact and movement which may damage the fragile USB-C connector on the BMPCC 4K electronics board. Only suitable for angled USB connectors. Print…
Bolt to keep the Smallrig cage for the 6K/6K Pro cage aligned to the 6K Full Frame. This is not for full support to hold down a rail or anything like that. I just didn't like the wobble it had without some support. I also wanted it low…
Together with Alexander Schwartz , we designed an adapter to mount the Logitech Brio Stream webcam to the SmallRig Teleprompter TP10 (SKU 3374) Here is the tinkercad source in case you want to modify it.
The adapter foot has two slots for M3x8 screws to provide a lock against sliding (as an original hot shoe has).
This simple holder will let you mount Airtag to Sony A6700 camera when using dedicated Smallrig baseplate. To mount it you need to open the lever on your baseplate and slid two tabs into dedicated spaces starting with the "inside" tab…
Without the riser, the cage's cold shoe mount blocks the DJI receiver's aux cable output. With the riser, there's plenty of room for the aux cable to clear the cold shoe.
This update fixes alignment for the compact V-mount rig. I also shortened the side cheese plate adapter.
Smallrig 99 V Mount Battery Tray holder for VB99 Pro VMount battery pack
I bought this Clamp, Ball-mount, arm thing from Smallrig. Unfortunately the protective pads inside the clamp are made of hard plastic shich slips on metal surfaces. So the clamp would never hold tight enough when mounted to anything that…
Replacement end cap for Preston DM-1X motor to accommodate a Smallrig “Universal Spring Cable Clamp” (MD2418), for cable strain relief. Hole is sized for a ¼-20 heat-set insert. Use original screws to fix the end cap back on the motor.…
To improve comfort when using SmallRig 1889 with a handgrip I created an attachment that covers side rail. Fits perfectly with Rumpf3D's handgrip ( https://www.thingiverse.com/thing:4201859 ). It's a snag fit design so you don't need to…
This is a case designed for the SmallRig P96 video LED light and includes a compartment for storing the type C charging cable. Also includes a recessed area inside to accommodate the stepless knob.
This is a spacer for using thin 4 x 5.65 cinema filters in a conventional matte box. Normal filters are 4mm thick, but thin ones like Formatt-Hitech's Superslim are 2mm thick. This 2mm spacer stacks with a 2mm filter so it doesn't move…
I've been on the hunt for an arm to attach to my Skadis wall to hold a light for my mini painting for a while. Managed to find a great mount but it needed a little modification to fit my wall, so I lazily slapped it together on my…
I recently received a smallrig cage for my Blackmagic 4K, it was second-hand and the seller hadn't included the fixing screws. The screws themselves were easy enough to get but this plate is custom to smallrig and seems difficult to get.…
Just a quick edit to expand the original gridfinity A6700 holder modeled by josef.stehlik. Doesn't fit snug on purpose in case you have attachments on the side.
Print with the large holes oriented vertically for the best strength. I printed mine in pla with a 0.2mm quality profile and no supports.
Print in the orientation of clips flat on the print bed. I've included a step file to allow for easy modifications.
Print in the orientation of clips being at the top. This makes overhang minimal (just the clip itself), meaning no need for supports. I've included a step file to allow for easy modifications.
A Gridfinity Shadowbox for a Fujifilm X-T4 with attached SmallRig L-Grip. I Printed it with PLA and default settings. Fitment is with a little bit of play, however tight enough that it still stays in place. This module incl. the fits…
Created a little wall mount for my Smallrig Magic Arm with a standard 1/4"-20 thread. The mounting holes are designed for 4.0 x 40mm countersunk wood screws.
Well, this thing allows you to attach relatively cheap Smallrig 2987 directly to HEJNE. It has enough thickness to allow pressing on the release button. You put two M6 hex-head bolts in it, then attach the adapter to 2987 via either…
I have a wall I keep my regularly used video equipment on. So I created this holder for my new Smallrig light. Can be screwed into the wall. Or use the Multiboard compatible version (download multiconnect connectors from David D. )
Simple second mountpoint for the Sony A6000 + SmallRig 1661 (could work on other A6xxx models but not able to test) Prined in PLA-CF (other materials should work fine) 0.15mm layer height Organic supports (needed for the screw hole) For…
This model is for smallricage Iphone 13 Max . I made this just for have a place in my house to easy find my things. I try to fix so i have all my hobby things in one place in my house. My MakerCorner.
GoPro mount for Smallrig Z-Cam F6 cage to use GoPro as Gyro logger for stabilizing footage in software like Gyroflow. Two models are included, one with 0° angle, the other with a 25° degrees tilt downward. I use the tilted version to see…
This is a replacement pad for a Smallrig crab clamp with 1.4Inch and 3.8Inch Thread: 2058 designed to print with TPU 95a. Its a bit trickier than PLA and needs drying and tests for temperature. My settings with a Bambu a1 were as follows:…
Battery Charger Stand NP-F550 F750 F 950 FM50 FM500 Battery charger Gridfinity stand. Added Hull Line Remover Space Print with PLA, PETG any speed, I added Hull line remove Space
I really enjoy the Killswitch case for my Steam Deck, and found myself using the mounting system to strap batteries to it for long flights. However, my batteries are mini cinema batteries with existing VMount mounting systems, and I…
I don't know about you, but unlocking tilt axis on tribex was traumatic for me multiple times. This simple handle friction fits on the stock handle to give you better leverage and, most importantly, prevent your fingers from colliding…
Smallrig Desview Teleprompter Gridfinity Storage (3x1 Grid) Sideways Stand
A protective cap to fit on a Bowens-adjacent proprietary mount for SmallRig COB lights. Tested on an RC 100C but will likely fit all SmallRig brand COB lights.
This is a very niche model for attaching the Kiev88 top prism to the OG RED Komodo with SmallRig Cage (3046). I honestly doubt anyone would ever need these two in this combination. But I did, so if you do too, I've got you covered. I…
So After I bought a tripod with an arcaswiss mount, I was annoyed since my zve10 didn't have an arcaswiss mount allowing to be attached on portrait, so I remixed this thing to be screwed on the cage's sides uses 2 1/4x10 screws
(Update 5/24/26 - An insert for a 1/4" - 20 nut has been added to the adapter mounting hole) A bracket for mounting a SmallRig NP-F battery adaptor (Or any battery adaptor with a 1/4"-20 screw) to a SmallRig BMPCC 4K cage. There are two…
Made for SMALLRIG Counterweight Kit, the Adapter fits this kit on the the SMALLRIG Cage
Givi tank bag mount to dove tail camera mount This model allows mounting your camera equipment on a motorcycle tank, having it in reach for immediate use! During my motorcycle trip in North America, I saw some bears on the road! It was a…
Description This is an ultra-compact cold shoe adapter designed specifically for SmallRig camera cages and accessories . The design prioritises minimum size, clean mounting, and secure screw retention , making it ideal for tight camera…
Makes the SMALLRIG 3061 (ArcaSwiss for DJI RS) compatible with Zhiyun Weebil 3s (and maybe also others). simply remove the teeth row on the smallrig plate and replace it with this thing.
Ein 3x1 Gridfinity Organizer für die ND Filter von SMALLRIG für die DJI Osmo Action 6
[EN] Professional light modifier for SmallRig RF 10C. Uses concentric rings to block side spill and focus the beam forward. Solid Design: Printed as a single block. No fragile meshes. Cross-Braced: Internal structural cross ensures rings…
used to make the cage fit a bit better
This 3D-printed spacer washer is designed to solve a common mounting issue with the SmallRig Universal Quick Release Mount Plate Kit and similar Arca-style accessories: the included or standard 1/4"-20 screws are often too long, causing…
My tripod came without a thumbscrew to fasten the handle to the pan/tilt head, so I modeled this part to work with an M6-1.0x30mm screw that fits the tripod threads.
Overview This is a dedicated holder for the SmallRig 4087 Dual Battery Charger, designed to house two Sony NP-FZ100 (or NP-F970) batteries. The design features hexagonal cutouts on the sides to save material and maintain a "cohesive"…
Simple adapter to connect a SmallRig crab clamp to a Panavise base. For assembly you will need one 1/4-20 x 2-1/2" bolt and 2-3 washers.
SUPPORTS ARE A NEED Velcro is attached/glued to the back of the holder and can be easily attached to your backpack.
