Wyniki wyszukiwania: sony

Sortowanie

1459 modeli

P
Printablesbooshong

Sony E-Mount 1.25" Telescope Adapter

Single-piece adapter for mounting a Sony E-Mount camera to a 1.25" tube. Thanks to this model/designer for the e-mount geometry. Designed for and tested with a Sony a6000 and Celestron NexStar 5SE, but should work with most E-Mount…

Pobrania
794
Polubienia
82
Ocena
4,67
P
PrintablesWithSebs

Eyecup Sony Camera for Sony A7RIV And other A7 models.

Viewfinder, Eyecup for camera model Sony A7R IV. Not sure if model will fit other versions of the Sony A7 series. When printing with PLA I used scaling of 101% in Cura.

Pobrania
431
Polubienia
48
Ocena
4,6
P
PrintablesBertware

Sony MDR-ZX770BN headphones hinge fix

The rotating joint/hinge on my Sony MDR-ZX770BN Bluetooth headphones broke on both sides. This piece attaches on both sides of the ear-cup hinge, encapsulates the existing, broken axle and puts a new one on top. Installation: Move the…

Pobrania
340
Polubienia
16
Ocena
5
P
Printablesoltas

Feder für Sony Objektivdeckel, spring for sony lens cap

Ich habe die Ferdern für 55 und 72mm Objektivdeckel entworfen. der Remix von Martin stellt eine Version für 49mm Objektivdeckel bereit I designed the springs for 55 and 72mm lens caps. Martin's remix provides a version for 49mm lens caps.

Pobrania
339
Polubienia
71
Ocena
5
P
PrintablesMarcus_3D

SONY TV remote wall mount

We had a problem - our 1 y.o. daughter still was "stealing" a TV remote and switching the channels - in the "best" moments of course :-) We hope this little print will help us. Download -> Share -> Print -> Rate -> Donate -> Enjoy ->…

Pobrania
326
Polubienia
15
Ocena
4,67
P
PrintablesRen

Sony Gold Wireless Headset Headband v2

First, some explanation. It's been over a year since I released the original model and because it's been kinda popular and I improved the design, I'm uploading it too. This one is designed for PETG, the original is for PLA. I originally…

Pobrania
244
Polubienia
14
Ocena
5
P
PrintablesOneKaidou

Hot Shoe Cover - Sony ILCE-7RM3

This is a hot shoe cover optimized for the Multi-Interface Shoe that is being used on the Sony ILCE-7RM3 camera. Its probably also fits on any other of their cameras as well though. This model is designed to be printed standing upright…

Pobrania
205
Polubienia
16
Ocena
4,8

sony pulse 3d wireless headset holder

Sony Pulse 3D Wireless Headset holder Print on "it's back" with 10% gyroid/grid infill and grid support from build plate only. This headset module couples with the adapater biltema (or the vanilla adapter ) so You need to print this…

Pobrania
153
Polubienia
1
Ocena
0

SONY WH-1000XM5 wall mount

The wall mont is attached with two screws. The holes each have a diameter of 5 millimeters Print settings: PLA 0,4 mm nozzle 0,15 mm layer need supports

Pobrania
150
Polubienia
22
Ocena
5
P
PrintablesThomak7

Sony NP-FZ100 Belt battery case

Belt holder for sony battery. It is equipped with a fuse, it is very tight. Printable version without supports it is possible to overcome the fuse by force. Version for printing with supports, the fuse must be unlocked before removing the…

Pobrania
129
Polubienia
11
Ocena
5
P
Printablescnaynik

Sony WH-1000XM3 spacer ring upgrade

The original design did not fit. I adjusted the dimensions and divided it into two parts to make it easier to print. The individual parts must be glued together. No Supports required.

Pobrania
111
Polubienia
23
Ocena
4,25
P
Printablesmstejska

Insert case for phone holder for Sony xperia 10 V

External dimensions 82.000, 11.000, 165.000 mm

Pobrania
88
Polubienia
2
Ocena
0
P
PrintablesPeter Farell

Sony Sports Walkman : Cassette Player

Sony Sports Walkman : Cassette Player 2 hinges. 3 walkman parts !!! Will probably need to trim down edges of hinges on lid or back. Needed to do some offsets post production and forgot to recalibrate the hinges… bit of sanding should…

Pobrania
81
Polubienia
30
Ocena
0
P
PrintablesSlemy

Volume Knob Sony GR-RX

Регулятор громкости звука системы Sony GR-RX Volume Knob Sony GR-RX If you upload .stl don't forget about tolerances

Pobrania
37
Polubienia
2
Ocena
0
P
Printablesshoyler

Sony a6600 Grip Extension with AirTag Slot

This is a slim grip extension for a Sony a6600 camera. It holds a single AirTag under the battery compartment. The AirTag on the non-door model is held-in by gravity and there is no clip or cover holding it in. The hinged door model has a…

Pobrania
28
Polubienia
1
Ocena
0
P
Printablesmstejska
Pobrania
28
Polubienia
6
Ocena
0
P
PrintablesPachuc

Sony SRS-XB23 Speaker Stand

Sony SRS-XB23 wireless speakers are famous for their high-quality sound, but their big drawback is directionality. When placed on a desk, the sound does not travel in a straight line to the ears. This stand solves this problem . When you…

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesClamikra

Camera arm for X-axis (Prusa I3MK3s+). Smallest camera with Sony video chip

I like monitoring my 3D prints with Webcams (nozzle-cam) etc. I found this tiny webcam that has despite of its small size a high quality Sony video chip built in. I chose the 1080p 30fps model with autofocus.…

Pobrania
16
Polubienia
0
Ocena
0
P
PrintablesBurns3D

15mL Conical tube adapter for Sony Cell Sorter

A tube adapter for the Sony FX500 Cell sorter. Should also fit the MA900 and SH800. Made when some of the adapters when some of them when missing. Printed on standard PLA settings for the MK3s+ printer, no supports. Print each part on the…

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesLance Hayabusa

Sony PVM and Olympus OEV Speaker Stand for Roland and Boss MA-12 Monitor

Inspired by https://www.printables.com/model/1042882-pvm-20m2mdu-speaker-mounts but for Roland and Boss MA-12 monitors. Recommend only these models as they are magnetically shielded. There are a number of Boss MA-12 variants so ensure…

Pobrania
14
Polubienia
4
Ocena
0
P
PrintablesSteveW91

Mounting Bracket for Sony SRS-ZR7

The speaker is upside down so that the buttons are still accessible.

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesLXO

Rear lens cap for Sony E-mount

Just as it sounds, it's a rear lens cap for your E-mount lenses. 12 times cheaper than buying it from Sony! Works on my lenses and with my printer but tell me if you believe i should change anything. edit: Added a double mount to be able…

Pobrania
5599
Polubienia
448
Ocena
4,78
P
PrintablesKoyo

Sony Dualshock 4 3D Scan

3D Scan of the Sony Dualshock 4 Game Controller

Pobrania
2014
Polubienia
23
Ocena
0
P
Printablesthenickdude

Microscope adapter for 4x macro photography with Sony A, E/FE, Canon EF/EF-S, RF, M, Nikon F, Z, Fuji X, Leica L, M4/3, M42 cameras

This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…

Pobrania
1957
Polubienia
270
Ocena
5
P
Printablesthenickdude

Sony E/FE lens mount

This is a printable model of the mount found on Sony E/FE lenses, which you can use to design accessories like extension tubes or custom lenses. Print at 0.1mm layer height, in PETG (recommended), PLA, or my pick, ABS. For ABS I had to…

Pobrania
1607
Polubienia
109
Ocena
5
P
Printablesa.taylor

Sony NP-FW50 battery holders

These are simple variations on the Sony NP-FW50 battery holder by RodLaird to hold different numbers of batteries. I was impressed with the simple but very secure design but had no need for 4 batteries. Anything from 1 to 6 is now covered…

Pobrania
1486
Polubienia
130
Ocena
4,86
P
Printablesearlmckay

SONY NP-FZ100 Battery Holder (1-5 slots)

I strongly recommend printing the model horizontally to give the snap lock more stability and durability. Feel free to support my work and leave a tip.

Pobrania
1413
Polubienia
123
Ocena
4,86
P
Printablesinjectx

Sony PSP display stand

Tested with my PSP-1000 but should also work with PSP-2000 and PSP-3000 models. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.28 Infill: 20% Filament: Eryone PLA Wood Notes: Printed with 0.5…

Pobrania
1318
Polubienia
118
Ocena
4,93
P
Printablesthenickdude

Microscope adapter for 2x macro photography with Sony A, E/FE, Canon EF/EF-S, M, RF, Nikon F, Z, Fuji X, Fuji G, M4/3, Pentax M42 cameras

When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…

Pobrania
1225
Polubienia
300
Ocena
5
P
PrintablesZiemniaczenka

Sony E body cap

Use supports for mount.

Pobrania
1204
Polubienia
82
Ocena
5
P
PrintablesFloTec09

Sony WH-1000XM5 replacement hinge

This is a simple replacement hinge for the Sony WH-1000XM5 headphones, that comes in handy, when your hinge breaks. Note, that this part is for the RIGHT hinge, If your left hinge is broken, just mirror the ‘Earpiece (Meshed)’ Part before…

Pobrania
1151
Polubienia
45
Ocena
4,5
P
PrintablesKangarooneering

(Updated V3) M42 Sony E Mount Adapter

Update (12/30/22) : I've been using an updated version 3 for a few months now and I think I'm mostly satisfied with the newest version. The newest version has rotated the threads so that focus markings on lenses better line up with the…

Pobrania
1127
Polubienia
42
Ocena
4
P
PrintablesShahriyar

Replacement Hinge Swivel Part for Sony WH-1000XM4 Headphone (Left+Right)

This is a replacement part for the Sony WH-1000XM4. So Recently my favorite pair of headphones that i've had for the past 4 years, finally broke, from my research I found the hinge breaking on the Sony WH-1000XM4 Headphones is pretty…

Pobrania
996
Polubienia
47
Ocena
4,88
P
Printablesrauberdaniel

Hot Shoe / Sony Multi Interface Shoe Cover

This is a hot shoe cover optimized for the Multi-Interface Shoe that is being used on all Sony cameras. It should fit on any other camera brand as well though. I modeled it similar to the original that ships with the cameras but improved…

Pobrania
986
Polubienia
63
Ocena
5
P
PrintablesK2_Kevin

Sony 4x and 6x Camera Battery Holder NP-FW50

Holds 4 Sony Batteries, simple push-in / push-out. I tried to make this super fast release, since we all know these batteries don't last long. UPDATE: Added a 6 battery version. NOTE: Works with Sony A7,A7II and other Sony products that…

Pobrania
977
Polubienia
118
Ocena
5
P
PrintablesJoedazin

Sony WH-CH510 replacement bracket

The first model (bracket.stl) is an upload of this model : https://www.thingiverse.com/thing:5407780 The second one (bracket_mod.stl) is the modified version with a groove to insert the wires. No need to unsolder/solder the wires to…

Pobrania
952
Polubienia
26
Ocena
4,75
P
PrintablesJason Walton

Sony WH-1000XM3 Replacement Arm (Left SidE)

The plastic arms on the Sony WH-1000XM3 are prone to breaking. This is a replacement part (modeled for the left side - I haven't taken my right side apart and I'm told it is not quite a mirror image). You can watch this short video if you…

Pobrania
882
Polubienia
74
Ocena
4,6
P
PrintablesStale

Replacement Side Cover for Sony WH-XB900N

Replacement part that I designed to save my headphones. Other replacement parts were either out of stock or too expensive so I made my own. Assembly Fold the ear cup in and remove the 2 black screws near the swivel joint. Separate the…

Pobrania
879
Polubienia
45
Ocena
5
P
PrintablesAxnarc

Sony WH-CH720N Repair

This is a replacement "wishbone" to hold the speaker as the top part of mine broke, this model is a bit sloppy but works well. There is a steel C clip on the original part you will need it to hold this to the headband same as the…

Pobrania
873
Polubienia
30
Ocena
4
P
PrintablesNICKSH

Sony NP-FZ100 battery case

Sony NP-FZ100 battery case would be nice if you could post some photos after printing

Pobrania
834
Polubienia
71
Ocena
4,25
P
PrintablesDave

Hot shoe cover for Sony

I lost the hot shoe cover for my camera (Sony A58) so I designed a new one. Should print in under 10min with default settings.

Pobrania
825
Polubienia
48
Ocena
5
P
Printablescolinhalebrown

Canon EF Lens to Sony E-Mount Body

Adapts Canon EF/ EF-S lenses to Sony E-Mount bodies. That is all, no lock, no frills.

Pobrania
821
Polubienia
28
Ocena
0
P
Printablesauc7us

Sony WH-H910N, MDR1000X, WH-1000XM2 Replacement

Tested it on my headphones, a tight fit but will surely work. I have added working height adjustment brackets too.

Pobrania
787
Polubienia
47
Ocena
4,8
P
PrintablesGreg M

Sony WH-1000XM5 arm repair

One of the arms on my Sony WH-1000XM5 headphones snapped. This print clamps over the arm, using 3 M3 nuts, and 3 M3 8mm cap screws to hold it together. The arm on mine broke with conveniently ragged edges, so alignment was very easy. I…

Pobrania
766
Polubienia
42
Ocena
5
P
PrintablesVVeasel
Pobrania
706
Polubienia
43
Ocena
5
P
PrintablesStrankler

Sony E-Mount NEX Lens Back-cover

Back cover for Sony E-Mount Lenses. Since my collection of vintage lenses, which I mount with adapters to my Sony alpha 7, grows rapidly, I needed a solution how to protect them from dust. Of course buying some would have been possible,…

Pobrania
698
Polubienia
82
Ocena
5
P
PrintablesJan

Lenshood Generator (SONY)

Don't look at the stl too much. The stl ist just an example, with the included Fusion 360 file you can create whatever lens hood you want! Adjust the "Change parameters" to your needs. To get the right fitting to your lens you may need to…

Pobrania
696
Polubienia
78
Ocena
5
P
Printablesdhananjaipai

Sony WH-1000XM3 Side panel replacement fix

Sony headphones are the best for all things audio, noise cancellation, and battery - but the sliders have been a pain! After my side panels broke, I had been keeping them forced close and tight with Cellotape. Since I got my 3D printer…

Pobrania
688
Polubienia
39
Ocena
5
P
PrintablesWidget

Sony A7CII / A7CR grip

Grip is mounted with a standard ¼" screw. It has a hole for a stabilising pin. Optional Arca-Swiss plate component included (import as one object into Prusa slicer to have it integrated). Printing Prints easily laying flat. Just add some…

Pobrania
663
Polubienia
77
Ocena
5
P
PrintablesEddoWagt

Sony A-Mount Rear Lens Cap

This is lens cap is a remix from one on thingiverse, rescaled a bit to fit better. I also added an indicator to match with the red dot on the lens. The position of that is not perfect, but it does the job. The cap fits perfectly, while…

Pobrania
645
Polubienia
52
Ocena
5
P
Printables3D NINJAS

Smallrig Sony ZVE10 Cage Camera Scan

Scan of a Smallrig Sony ZVE10 Camera Cage for reengineering Important: The 3D Print Resolution Version is for this camera handle : https://www.printables.com/model/1134961-smallrig-camera-handle-with-hot-shoe-adapter

Pobrania
600
Polubienia
23
Ocena
0
P
PrintablesRod Laird

Sony NP-FZ100 battery holder

The NP-FZ100 battery is used in the Sony A9 and A7-RIII. I had previously designed a battery for the A7-RII's batteries - something that was really needed given the rate you go through them. Now with the additional A7-RIII body (and…

Pobrania
590
Polubienia
51
Ocena
3,67
P
PrintablesJP

Rear lens cap for Sony E-mount (No Text)

A remix of LXO's model without text on either side. Printing without text will leave a nicer finish on my printer.

Pobrania
569
Polubienia
35
Ocena
5
P
PrintablesBMdesign

Lens Cap Holders for Canon, Nikon and Sony DSLRs

The newest version of my Lens Cap Holders. Now with more supported filter diameters. The following diameters are supported: Canon: 49mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon: 52mm/55mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon (extended):…

Pobrania
544
Polubienia
128
Ocena
5
P
Printablestwothingies

Headphone stand - PS5 Sony Pulse 3D

We made a custom wall hanger for the Sony Pulse 3D headset! It allows you to hang your headset vertically, keeping it safe and out of the way when not in use. Designed with 3d-printing in mind, our support is very sturdy and easy to…

Pobrania
541
Polubienia
75
Ocena
5

Gridfinity Sony E-mount Lens holder

I couldn't find any custom divider bins for holding my Sony E-mount lenses. So, I remixed the 2x4 bin to a simple base holder for a quick grab and go. I recommend printing this with minimum 10% sparse infill and gyroid pattern . Thank…

Pobrania
538
Polubienia
84
Ocena
5
P
PrintablesBlueShell3D

8 Inch Sony PVM and BVM Stand

Print as shown in the picture. PETG is recommended with 4or5 perimeters and 25% infill. Use 100% for the small ledge at the very back (or top as positioned in your slicer). We can only confirm compatibility with our own BVM-8045QD.…

Pobrania
523
Polubienia
58
Ocena
5
P
PrintablesRod Laird

Sony NP-FW50 battery holder

Sony's A7 cameras chew up batteries like candy. They all the the NP-FW50 batteries which are small and light - but you need to carry quite a lot of them around on a day's shoot. This is a simple holder for 4 batteries. You can insert the…

Pobrania
520
Polubienia
65
Ocena
5
P
Printablesthenickdude

Extension tube set for Sony E/FE for macro photography

This set of extension tubes enables macro photography using your existing Sony E/FE lenses on your Sony E/FE mirrorless camera. I've provided tubes in 7mm, 12mm, 24mm and 35mm lengths Since there are no electrical contacts, you won't be…

Pobrania
520
Polubienia
70
Ocena
5
P
PrintablesAphlox

Sony WF-1000xm5 CASE

I modeled it for myself. There are 2 version (with and without a loop to hook airtag etc.) I used a drop of hot glue to fix the earbuds casing to the printed case. Airtag case from the pictures is a different model (not mine.) and not…

Pobrania
508
Polubienia
34
Ocena
0
P
PrintablesPhanto

Sony WH-1000XM5 Headphones Broken Slider Fix

You will need a screw where the thread is M3 and 8mm long and an M3 nuts. You will need to push the wires through the gap in the print and the make sure the thicker part (bottom) is clamping onto the bearing and the slimmer part is…

Pobrania
507
Polubienia
33
Ocena
5
P
PrintablesXimple Printing

Thumb rest for sony A7C

I recently upgraded my camera from Sony A7M2 to Sony A7C. As much as I love small form factor cameras, the ergonomic of A7C is not ideal for my hands. I have seem people using thumb rest for Leica & Fuji cameras and I have always though…

Pobrania
498
Polubienia
46
Ocena
5
P
PrintablesZiemniaczenka

Sony E to Canon EF adapter with lens lock

I added alternative lever that uses M2x5mm (or longer cut to size) screw as a locking pin, it may scratch your lenses but is stronger and more reliable. To secure the screw in the lever you can use some leftover plastic from…

Pobrania
493
Polubienia
52
Ocena
5
P
Printableshrishib

Sony NP-FZ100 Battery Holder

This is 4x holder for the Sony NP-FZ100 battery. There is also a 2X version in the files. The lid attaches to the holder with 3x3mm magnets. Also attached are the Fusion 360 files. If the fit is too snug, please modify the current offset…

Pobrania
489
Polubienia
95
Ocena
5
P
PrintablesAnatoly SL

Sony camera hot-shoe cover

No support required, quick print. It has cutout at the end to keep the multi-interface safe.

Pobrania
480
Polubienia
70
Ocena
4,78

Sony Xperia Z (C6602/C6603) Cover / Case

Sony Xperia Z (C6602/C6603) Cover / Case Wide corners and near perfect fit. Has slightly overlapping face so the phone screen never touches surface when up-side-down.

Pobrania
480
Polubienia
26
Ocena
0
P
PrintablesMidPoint

Sony NP-FZ100 Battery Holder

Very practical battery holder for 2 NP-FZ100 batteries + 2 SD cards and 2 Micro-SD cards. I got the idea from the Sony Facebook Group, but the creator removed the file from thingiverse and it is nowhere found again. As i found the Design…

Pobrania
475
Polubienia
55
Ocena
4,83
P
PrintablesThatSilkyGoose

Sony NP-FZ100 Expanded Battery Holder

------------------- Sept 2026 Update ----------------------- Following some helpful feedback, the original models have been marked as "DEPRECATED". The updated versions have an improved fit, and should hold the batteries more securely…

Pobrania
475
Polubienia
33
Ocena
2,5
P
PrintablesMcray4

Hinged SD Card Box with CF Express Type A for Sony

I remixed a great hinged box and changed 2 slot sizes for my Sony camera's CF Express type A cards

Pobrania
469
Polubienia
27
Ocena
5
P
PrintablesJHB95

Sony E-Mount body cap

Bought a used camera, and it did not come with the cap for the camera body. I wanted it to have both the alignment marker, and to clip to the camera. I have remixed another cap before, but decided I wanted to make my own model from…

Pobrania
449
Polubienia
20
Ocena
4,75
P
PrintablesBoaztheostrich

Kodak Funsaver Sony E mount Lens

This is a modification of Volzotan's excellent model but for Kodak Funsaver 11mm Lenses. I would highly suggest checking out Volzotan's video on his process: I would also suggest checking out this video by George Moua on how to remove the…

Pobrania
449
Polubienia
50
Ocena
5
P
PrintablesLaire

Gridfinity Sony A6400 (α6400 / ILCE-6400) Holder (Various versions)

You will find different versions in different heights. I have only printed the 6U versions. If you have wishes for other versions, write me a PM or a comment.

Pobrania
448
Polubienia
72
Ocena
5
P
Printablesmkosiedowski

Ikea Skadis - Sony TV remote holder

A simple holder for Ikea Skadis pegboard suited for Sony Bravia TV remote control

Pobrania
443
Polubienia
41
Ocena
5
P
PrintablesVasilii

Sony PlayStation 5 DualSense USB Cable Guard

This is a USB cable guard for Sony PlayStation 5 DualSense that clips onto the controller. It is designed to hold original PlayStation 5 USB Type C cable firmly when it's connected to the DualSense. This removes strain from USB port and…

Pobrania
443
Polubienia
67
Ocena
4,75
P
PrintablesMaCo_3dprinting

Sony WH-CH720N Left Hinge Repair piece

This was a briliant model of the hinge for the Sony WH-CH720N, but it was only a model of the right hinge so I just mirrored the model to make a left one as well. Kudos to the maker of the original model please go like and download his…

Pobrania
442
Polubienia
13
Ocena
5
P
PrintablesRagingRoosevelt

Headband hinge pivot fix for Sony WH-1000XM5 headphones

This part provides an encapsulating brace for the pivot hinge for the Sony WH-1000XM5 noise canceling headphones. The brace is tight enough around the bottom part to keep the joint together while remaining loose enough around the pivot to…

Pobrania
441
Polubienia
22
Ocena
4,75
P
PrintablesSteven La

Sony Hot Shoe Cover

Printed vertically on a BambuLab P1S without supports or brim at 0.08mm layers. Vertical gives the best surface finish, but printing it horizontally with Arachne perimeters can work too. If you have a bedslinger, consider adding a brim.

Pobrania
441
Polubienia
37
Ocena
4,75
P
PrintablesZiemniaczenka

Sony E to M39 adapter

Use supports for E-mount Thread clearance is 0,1mm. Flange focal distance = 28.8 mm. So far tested only with industar-61 from FED camera.

Pobrania
437
Polubienia
24
Ocena
5
P
PrintablesAlex Fiel

Sony E-Mount Wigglegram Lens

Example Photos : alexfiel.com/wiggle After stumbling across some of Kirby Gladstein's photography , I wanted to see if I could recreate the effect with my Sony a6300 mirrorless camera! I used Autodesk Fusion 360 to design the parts and…

Pobrania
434
Polubienia
71
Ocena
5
P
PrintablesBroknP

Case for Sony WF-1000XM4

Remixed the model of pianoplant to either include no hole in the top (original) or 3 more remixes that should be easier to print (for example with TPU) since they have simple overhangs. Original without the hole in the top Modified with…

Pobrania
427
Polubienia
25
Ocena
5
P
Printablesathome128

Sony NP-F Battery Solderless Batteryplate

This 3D print lets you make your own NP-F battery plates without any soldering! The design uses bananaplugs usually found in model trains (German: 2,6mm Querlochstecker) and can be assabled into a stury battery plate with customizable…

Pobrania
418
Polubienia
33
Ocena
0
P
PrintablesDaniel H

Sony Memory Stick Pro Duo Adapter

Place a Sony Memory Stick Pro Duo into the recess label side up, then carefully slide into a Memory Stick device. Remember that it's likely an original Memory Stick device can't take the largest capacity >2GB Pro Duo cards.

Pobrania
414
Polubienia
13
Ocena
5
P
PrintablesZiemniaczenka

Sony E rear lens cap

Compared to original - changed branding, increased grip, chamfered sharp corner

Pobrania
411
Polubienia
36
Ocena
5
P
PrintablesVasilii

Sony PlayStation DualShock 4 USB Cable Guard

This is a USB cable guard for Sony PlayStation Dualshock 4 that clips onto the controller. It is designed to hold original PlayStation 4 microUSB cable firmly when it's connected to Dualshock 4. This removes strain from microUSB port and…

Pobrania
399
Polubienia
59
Ocena
5

Joycon Stick Drift Protector for any pro controller XBOX SONY Nintendo

design to prevent joy stick from being crushed when traveling or placed into a pack.

Pobrania
392
Polubienia
29
Ocena
3,25
P
PrintablesJono L

Sony Remote Holder

Designed for Sony Smart TV Remote. Has 2 countersunk screw holes for plasterboard screws.

Pobrania
370
Polubienia
48
Ocena
5
P
Printablesenricom79

SONY NP-FZ100 Battery cover

I've printed vertical ('sony' face on the plate) with support only for the top retention overhang, the small guides on both internal borders can be printed without any support. I tested it with 0.1 layer and with 0.2 layer, 20% infill;…

Pobrania
369
Polubienia
31
Ocena
4,75
P
Printableskrypto elia

Sony A7 Camera with Lens Detailed 3D Model

Discover the intricacies of the Sony A7 with my meticulously detailed 3D model, perfect for enthusiasts, designers, and educators. This high-fidelity model includes every detail of the camera body and lens, capturing the essence of the…

Pobrania
369
Polubienia
15
Ocena
0
P
Printables490 MFG

Sony A7 III Body Gridfinity 2x4 holder bin

Very simple 2x4 gridfinity bin to store a Sony A7 III body for quick and easy retrieval from storage. Bin also includes a nice box on the bottom of the camera to allow you to leave a Tripod mount attached. Prints quite nicely in PLA, I…

Pobrania
366
Polubienia
33
Ocena
0
P
PrintablesEfeler_Gibi

Improved Sony E-Mount body to Nikon F-Mount Lens Adapter

The original design wasn't adjustable, you couldn't fine-tune it by sanding or adding a shim. Sanding the mount side would cause the lens to get loose. Improvement List: 1- I split the adapter into two parts that screw together. This…

Pobrania
366
Polubienia
42
Ocena
5
P
Printableskicsikrumpli

Ikea pegboard Sony headphone holder

Hang your headphones on Ikea pegboard. Prints without supports, hooks onto pegboard. Modelled for Sony WH-1000XM4.

Pobrania
361
Polubienia
46
Ocena
5
P
Printablesagilellama

Gridfinity Sony PSP 1000 Stand

This design holds a Sony PSP 1000.

Pobrania
361
Polubienia
46
Ocena
5
P
Printablestaeraeyttaejae

Sony Minidisc Walkman display stand

Stand fits MZ-R700 that is a bit top-heavy with alkaline AA inserted, as well as slimmer MZ-N910. Probably fits a range of walkmans - post a comment if your model fits well!

Pobrania
357
Polubienia
41
Ocena
4,88
P
PrintablesSilver99

Sony A6000 eyecup

This eyecup replacement include small flap which covers partly proximity sensor. This proximity sensor is too sensitive on SONY A6000 causing switching from rear LCD to eyefinder too soon.

Pobrania
356
Polubienia
36
Ocena
5
P
PrintablesEdgar_DT11

Battery cover for sony tv remote controler

Living with children is hard not only for fathers, but also for material things.... After surviving a few drops to the floor, the battery cover on my TV remote broke. I could not leave the remote with the batteries exposed while my…

Pobrania
353
Polubienia
27
Ocena
5
P
PrintablesRen

Sony Gold Wireless Headset Headband

edit: There is an improved version designed for PETG now. If you own the headset, you probably already know the original headband is very prone to cracking. There is already rudimentary replacement part out there but I wanted nice,…

Pobrania
350
Polubienia
25
Ocena
5
P
PrintablesChance Shultz

SONY PLAYSTATION PULSE ELITE CHARGING DOCK MOUNT/SHOE

This is just a plate so you can attach your ps pulse elite to your desk or anywhere. I also made a v2 with screw hole.

Pobrania
349
Polubienia
19
Ocena
5
P
Printablesgreylivesign

Sony XM5 Headphone Mount for Fractal North

https://www.printables.com/model/503765-sony-wh-1000xm5-hanger This is a remix of the above model. I added 3 hangers that hook into the slots of the front panel for the Fractal North. I have not tested with the XL north case. Headphones…

Pobrania
348
Polubienia
43
Ocena
5
P
PrintablesNatalie T

Lens Reversing Ring for Sony E-Mount for every lens size

Need to take some macro shots, but don't want to get a dedicated macro lens? Try out a reversing ring. Currently, 30.5mm-127mm lens filter threads are supported (nearly every size), although the larger rings might not fit on your specific…

Pobrania
347
Polubienia
56
Ocena
5
P
Printablesanonimowy891

Sony ZV E10 Rig

Before you buy alloy rig just check cheap version, for sure it is for you :P

Pobrania
345
Polubienia
47
Ocena
5