2535 modeli
I made a remix to fit my ESP-WROOM-32D because the ESP won't fit with the original case. I also changed the fittings a little bit so that it can be easy reopened.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Print both the lid and the body. The ESP32-C6-DEVKIT-M-1 can be pressed in and should be held in by friction. The tolerances are designed for this purpose. I printed it on my Ender 3 with Prusament PLA Galaxy Black and 0.2mm Layer Height…
Wydruk około 0,95 €–1,17 € nettoWstępna wycena jednego wariantu
Make sure the cam is mounted securely before using to the avoid risk of tearing the flatflex. Contrary to other designs the grabbing teeth have a tiny angle to them, they get thicker in the middle. This allows for slight off-center usage…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
The housing was made for the AI-Thinker ESP32 Audio Kit V2.2 A405 (but should fit for the other variants of the V2.2 kit too). SD slot, USB connectors, audio jacks, both MICs, the LEDs and all pushbuttons are accessible. The RESET and…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Quick print to house ESP32 D1 Mini. Snaps together with cutouts for USB, LEDs and a paper-clip hole for reset.
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This tiny housing for the seed studio xiao esp32 s3 sense is TINY! I didn't find a mounting option I liked, so I made my own. Features: Magnetic base: Use a 14mm round magnet to attach the foot anywhere on your printer SD card is easily…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Another housing for the ESP32 development board with a 240*320 pixel display. Suitable for these two boards: ESP32-2432S028R https://de.aliexpress.com/item/1005007774435209.html ESP32-2432S028 2xUSB…
Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu
I made this model looking at what others have made but adjusting to my needs, (didnt remix any other model in this, made all from scratch). I needed a strong and secure casing for my ESP32Cam with USB module, that would acomodate the…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
I took the great design of Ornoterms and replaced the holes with easy snap fits.
Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu
This 3D enclosure is designed to securely house the Seed Studio XIAO ESP32S3 Sense, providing both protection and easy access to key components. The compact case ensures a snug fit while leaving essential ports and sensors exposed for…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an enclosure to mount an ESP32-CAM on X-Axis stepper motor. LONG CAM CABLE NEEDED! (I used ov2640 with 75mm cable). Inspired by similar mounts for pi cams and customized for ESP32-CAM and Prusa Mini. Case is the same in both…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Camera Mount for MK4(S) suitable for Part of MK4 "x-end-motor-R2.stl2" No support
Wydruk około 0,53 €–0,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I havce modified the Rames The Generic XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera) mount to be compatable with Michal Fanta 's Articulated arm.
Wydruk około 0,40 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…
Wydruk około 3,67 €–4,48 € nettoWstępna wycena jednego wariantu
BerHerJohLin's ESP32-CAM-MB is a nice, modular design - but currently only for the Pipersberg G4 RF1 c. Only the part which attaches to the gas meter needs to be replaced. In this case, it was replaced with a part for the Elster BK-G4 MT…
Wydruk około 7,56 €–9,24 € nettoWstępna wycena jednego wariantu
case for ESP32-DevKitC V4 (ESP32-WROOM-32D) and rf 433mhz Superheterodyne modules (regular modules have components that can interfere with those mounts) requires: 2x m3 nuts 2x m3*8 screws some supports required for main body possible…
Wydruk około 2,33 €–2,84 € nettoWstępna wycena jednego wariantu
I wanted to make a small case that protected the Xiao while also making things look a little cleaner. This is the smallest possible case I'm personally able to design and it snaps together pretty easily (though it is a tight fit). I…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ESP32CAM module holder for tilt and pan servos. This is a replacementfor the top portion of the clasic tilt-pan module.
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
ESP32-CAM Case with Articulated Mount: Securely holds the ESP32-CAM in various positions with a flexible, articulated mount for easy adjustments. Designed with precision cutouts for USB port.
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
printed at 99% scaled size to create tight fit on the ESP32-CAM Opening the provided ESP32CamCaseV2pt2.3mf file with PrusaSlicer will enable you to view the negative volume modifiers I used, and allow you to create your own gcode for…
Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu
Connection Box for Wago 221-420 to Breadboard – Sensor Integration This enclosure provides a clean and robust interface for routing multiple sensors via three Wago 221-420 (10-slot) connectors into a 400-pin breadboard (84 × 55 × 8.3 mm)…
Wydruk około 5,44 €–6,65 € nettoWstępna wycena jednego wariantu
This is an ESP32-CAM case that mounts to the top of the inside glass of a 3D printing enclosure and prints without supports. This case fits Version #1 of the MCU board as described by detailed JohnyHV HERE . It may fit version #2 but I…
Wydruk około 2,67 €–3,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi! I use a simple IR-Remote to control some of my smart-home devices and automations using home assistant. I built this little IR-Receiver using an ESP32 (CH340) USB-C Board and a KY-022 IR-Receiver. Both very inexpensive components. I…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
Files Top Base Base with antenna Photos: Grey Print = No Antenna Black Print = Antenna Printing This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input…
Wydruk około 1,86 €–2,28 € nettoWstępna wycena jednego wariantu
Simple case for AI on the edge watermeter using ESP32Cam. See documentation . I fixed the baseplate with double-sided tape on top of the watermeter.
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I use Plumbus for my Raspberry Pi camera, so I wanted the same system for ESP32 as well You have to glue both parts together, one goes to ESP32 case by Michal Fanta and second is adapter for Plumbus
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just made a wider bore in the frontpart (10.2mm) for a 120° Wideangle Camera. All other parts remain the same. Camera: https://de.aliexpress.com/item/1005007291555550.html
Wydruk około 0,66 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used this camera box: https://www.prusaprinters.org/cs/prints/110323-esp32-cam-housing Bolts and nuts M5/20 Prusa Orange + Prusa Black
Wydruk około 0,54 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A arm mount to hold the cheap PBB8-0147 powerbank found at your local Five Below or on Ebay. Oh, and the ESP32 itself! Intended for the LucidVR VRGloves to power the unit without adding extra weight on the hand and wrist. Designed to…
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
Inspired by rPI camera mount projects, this one mounts an esp32Cam and usb socket, dimmable led under the X-axis motor. Wiring back to Rpi 5v power bus and gpio controller relay for OctoPi controlled light switch via Enclosure plugin.…
Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu
I designed a case how I needed it for my setup. The ESP32-CAM fit very tight on all side in the case. There are shims on the front and back cover so no movements are possible in any direction. The back pins are also completely inside the…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This is a basic box to mount an ESP32 Max v1.0 Development board (Arduino UNO Clone) with a single channel 5V relay and a BMP280 temperature sensor (should work w/BME280 as well) to interface with a garage door opener utilizing a…
Wydruk około 4,15 €–5,08 € nettoWstępna wycena jednego wariantu
Motivation I wanted to securely mount my Olimex ESP32-POE-ISO-EA and its WiFi/Bluetooth antenna to my Strong FS AV Rack so I could use it as an ESPHome Bluetooth Proxy for the Home Assistant SVS Subwoofer Integration . Solution Design and…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my ambient monitoring station box for my PRUSA MK4. The project is based on the Adafruit Feather ESP32 with BME sensor (P/N 5303) that will measure the outside ambient temperature, pressure and humidity. Inside the enclosure is…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
luego de quemas mi placa e no quise desecharla, asique decidí darle un uso decorativosp32
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
I used PLA with 0.20mm structural on prusa. When inserting device, put USB-C in first while ensuring it is aligned with the opening's center. The device is very fragile, so don't pull it out by the screen or the screen can come off!
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Seeed Studio ESP32C6 + HiLetgo MAX98357 + CQRobot Speaker Case Dimensions: Speaker - https://mans.io/item/cqrobot/cqrlb4o3w-b Amplifier - https://www.adafruit.com/product/3006 ESP32C6 - https://www.espboards.dev/esp32/xiao-esp32c6/ No…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recently purchased a Mini excersise bike and decided to upgrade the trip counter to display a basic count and broadcast the count to a Python server to remotely calculate the distance and speed as well as being able to log results and…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
We keep a Sofirn SP32A near a door and I thought it’d be nice to have a snug little wall mount for it. First time modeling anything in Fusion 360 and went through a few iterations for a nice hold, no supports, and a touch of styling.…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ENG you will need 2 types of Double-Sided Tape, I use 3M VHB 4910 12mm Deli-E30407 Double-Sided Tape with the "E30407" you need to tape the "triangle" to de esp32cam board and cam with the "3M VHB 4910" you tape the esp32cam to the "body"…
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
Used the stl-files for this enclosure for a viewe 7" touchscreen from instructables and modified them - no wallhook and a thinner backplate (3mm). - LINK For the software I used this esphome repositoriy for the integration of display to…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ESP32 & SEN65 Enclosure (Modular Case) A very simple and functional case for the Sensirion SEN6x series (specifically tested with the SEN65 ), designed using the original manufacturer retainer and foam models. Original Sensirion retainer…
Wydruk około 3,14 €–3,83 € nettoWstępna wycena jednego wariantu
Has cutouts for illumination LED and camera, as well as buttons on the side for the two buttons on-board.
ESP32-WROOM-32 Box (USB-C) A small box with snap-fit removable lid for the ESP32-WROOM-32 development board. Pins are still accessible from the underside via two slots. Please note this is for the 28mm x 52mm (approx.) PCB, this is the…
If you want to support my work, just buy me a coffee: paypal.me/predypavlovic Case for ESP32 dev board No screws required Ventilation openings Can be mounted without unplugging the circuit board Includes housing with and without pin…
OpenSCAD sedigned case for the esp32 development board. Thanks to Sergio Vilches for the rounded corners!
ESP32 Devkit V1 Case w/ Snap-on lid with button detents and cutouts for USB, LEDs and pin access. This case is thick enough so that the pins are completely shielded inside the case, though accessible for connection. IF you want a version…
Basic case for USB-C version of the ESP32 2432S028 2.8" module, also known as Cheap Yellow Display (CYD) / CYD2USB.
ESP32 C3 Super mini 3D MODEL - .STEP - .f3z
This case is intended for the Articulated arm mounted on the Original Prusa printer.
I was inspired to design this ESP32 D1 Mini case after writing a blog about using the ESP32 D1 Mini and ESPresense to incorporate room-specific presence detection in my Home Automation . After using someone else's design, I thought it'd…
A basic case for ESP32 Super Mini boards. Lid clicks in place quite firmly. With optional pass-through for wires. Most Super Mini boards have 18x23 mm dimension, some are slightly longer. 23mm and 24mm are available here, use the OpenSCAD…
I got inspired by https://www.printables.com/model/286528-cam-case-for-esp-32-wifi-cam Unfortunately, the files that come with it are unusable and thus I started to design my own. The whole assembly is a tight fit to ensure a good…
A Minecraft Ore Lamp powered by a USB-C ESP32 D1 Mini and a WS2812B LED Ring , running WLED for full RGB lighting control. Bill of Materials The lamp was designed to perfectly fit the following components: USB-C ESP32 D1 Mini from…
This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…
🎉🎉 PARTS KITS ARE NOW AVAILABLE HERE 🎉🎉 Build your own universal smart remote! This project turns a simple ESP32 and tactile buttons into a powerful, battery-powered remote for Home Assistant — perfect for media control, lights, scenes…
The original had some odd open space so I closed that up. It should snap fit but if not a little piece of tape or a dab of glue will do. This is my favorite case for ESP32's that don't have anything connected to the pins.
ESP32 2.8inch Touch IPS CYD LCD Screen Case I recently purchase this screen from Ali Express. It has a very unimaginative name "ESP32-2432S028R" which makes it hard to find. For that reason it is also known as the Cheap Yellow Display CYD…
This case fits the Teyleten Robot ESP32-S3 Development Kit sold by Amazon… https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details This development kit has two USB-C connectors without the pins soldered to the board.…
Housing for ESP32 Cam modul (Tinker board) Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0,2 Infill: 100% Notes: After printing you can use female breadboard connectors with the plastic…
Case for ESP-WROOM-32 ESP32. The lid snaps on without any screws or glue and has openings for pressing the buttons with a paperclip. The base is deep enough to keep the headers on the board, although I de-soldered mine. There is an…
This is designed to hold an ESP32 with pin headers soldered on and allow you to use dupont connectors with it. As the filenames imply, this was built with the ESP32-WROOM-32D in mind, specifically the one from HiLetGo. The main components…
Update 1: Small optimizations to the casing Added a small groove for lifting the lid Added some space inside on the back for potential cables Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini…
Please comment, rate, and post a make! Update 2/1/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with an…
I'm using these esp32-devkit boards as ESPresense sensors: https://www.amazon.co.uk/gp/product/B08LGNV6V6 I just wanted a box I could put them in so I didn't have bare electronics around the house, and I couldn't be bothered ordering some…
I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…
ESP32 DEVKIT V1 BOARD 30 PIN: STEP F3D PARAMETRIC MODEL: USB C OR MICRO USB B WITH PIN OR WITHOUT PIN
WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the PETG versions of the case) which has…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO ESP32C3, an Arduino & CircuitPython capable RISC-V board with Wi-Fi, Bluetooth and USB-C that comes with an antenna and costs $4.99. The product page for this device can be…
Remix of the enclosure designed by @mdkendall for the ESP32 Cheap Yellow Display (ESP32-2432S028R) found on Aliexpress & similar sites. Model adjusted for the USB-C board version, which does have slight variations of the connector…
This 3D model of the ESP32 WROOM-32 development board is slightly enlarged for better 3D print quality, capturing key details like the ESP32 module, pins, surface-mount components, USB Type-C connector, reset/boot buttons, and mounting…
Modified stair climbing rover to carry a robotic arm. Mounting is in the lower frame, servos are rotated 90°, covers and frame have cutouts for the robotic arm. The ESP32 CAM with external antenna is mounted in the top cover, through…
Updates 13/07/2024 - Added bottom with holes 05/10/2023 - Added filet to the case ---------------------------------------------------------------------------------------------------------------- Case for Seeed XIAO ESP32-S3. Used STEP…
Ein einfaches Schutzgehäuse für den Esp 32 mit dem Vorteil das die Pinout Belegung noch ablesbar ist.
You shoul use a 4 M3x10 screws to secure a screen to the case.
Model of the commonly used ESP32-S3 devkit to be used when designing cases, devices, etc.
This is a small protective case for the following Sunton board: ESP32-2432S028 Note: You'll need 2x M3*4 bolts to attach the PCB to the casing. If you are looking for additional electronics projects, checkout the following page:…
I needed a small case for this particular ESP32-C3 board offered with integrated OLED display on AliExpress. I use it as a cheap, tiny display with ESPHome and Home Assistant to present small amounts of sensor data directly at the…
Remix of the ESP32 Cam case by mojocorp . I really like their design, however I wanted the following. Printable without supports Room for Dupont connectors Tripod mounting hole Increased rear rim thickness The shape of the original looks…
This is a simple case for the Seeed Studio XIAO-ESP32-S3. It has an option with an extra plank that you can stick the external antenna onto. The lid snaps on without any screws or glue. This is an initial model for basically the device…
I couldn't find a ready made case for the type of ESP32 I had ordered, so I made my own. This fits a 38 pin version of the ESP32-Wroom-32D with built-in antenna, labelled DevKitc V4. There are two versions of the body: a thick version…
Case with Snap-on lid. Lid has detents for buttons. Case has cutouts for USB, LEDs and pins will stick out of back of case. If you want a version of this case where the pins are fully shelled/enclosed - see:…
Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and…
I created a small case for my ESP32 / NRF24L01+ setup running the awesome OpenDTU software to monitor my Hoymiles inverter. The case was created to just fit the components I had available. It has space for a 46 mm x 59 mm circuit board…
This case can be used to store or actively use ESP32 DEVKITV1 or ESP32 WROOM The bottom holes are to push the ESP32 Board out of the socket. Also ,the top can be mesh for better heat dissipation. NOTE : For the version with buttons use…
ESP32 Wroom Box Close with snap clips (press fit) Please be sure about the ESP32 board size: 26x52mm Different manufacturers have different board sizes. BENEFITS: Fast to print Easy to use Small & Strong Designed for FDM Printing Smooth…
ESP32 CAM CASE - it can be used for 3Dprinter time lapse https://www.aliexpress.com/item/1005001322358029.html?spm=a2g0o.order_list.0.0.21ef1802HnQU5g Material : any Supports : no Layers : minimum 2 for cam firmware can be used this…
ESP32-WROOM-32U Based WiFi Repeater Utilizes the ESP32-WROOM-32U module for powerful WiFi repeating capabilities. Enhanced signal strength with an external antenna (IPEX connector) for optimal performance. Firmware based on ESP32 NAT…
Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…
Simplistic case for esp32 (devkit c). It has a snug fit for the esp, pin and usb breakout and lets you easy remove the esp board. The case itself is meant to be glued together. The purpose was mainly for my private projects, but I wanted…
I took the previous model and updated it for the newer USB-C connection and made room for an antenna on the case.
The ESP32-CAM enables you to build a complete webcamera and is available from under five bucks! Here's some great info from someone on youtube https://www.youtube.com/watch?v=MicAM_A0_lU There are a bunch of ESP32-CAM cases available…
I loved the original design, but I wanted a holder for the little touch pen that came with my USB-C CYD. Here's the result! Requires 2-4 M3x6 screws. Socket-head fit flush, but others will still work. I'll add an adjustable 2020 extrusion…
I got myself some ESP32 to use as a bluetooth proxy in Home Assistant and needed a case for them. The ones I found online were not really what I was looking for or weren't for the board version I got. So I designed a case myself. It is a…
Made a project box for the ESP32 WROOM (although most ESP32 boards have the same form factor), with a lid for the 0.96" OLED screen. It houses multiple access points for wiring, and a small 10mm slot for the touch sensors. I use a folded…
Just a simple gridfinity bin for storing ESP-WROOM-32 devboards. You can download the STL if you just want to print it easily, or the negative stamp if you want to replace the base gridfinity bin with a different version (like one without…
Designed this case with a snap-fit lid to fit a 38 pin ESP32 breakout board, you'll find these all over aliexpress/ebay/amazon, etc. The case has symmetrical cutouts to access the terminals on either side, so you can mount the board in…
Snap-fit closure for ESP32 board, with pins available for prototyping purposes. This remix of the existing model removes the material between the pins inside the box. Printed beautifully using Inland PLA+ with a 0.5mm nozzle at a 0.28…
This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…
Fits the AZDelivery ESP32 Cam Module Board. There's a good chance other branded boards also fit. Snap fit enclosure Enclosure has holes for the ESP32 cam board pins to hold it in place Use some glue or double sided tape to attach the…
