16 504 modeli
I created this suspended hand artwork using bridges for the strings. You don't need any supports. It prints in 0.2mm layer height and wall generator set to Arachne in Bambu Studio. In Cura or PrusaSlicer you need to select Print Thin…
Wydruk około 6,17 €–7,54 € nettoWstępna wycena jednego wariantu
Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…
Wydruk około 2,99 €–3,65 € nettoWstępna wycena jednego wariantu
This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
Diametre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N° 1 Pack N° 2 Pack N° 4 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Version 2 Available 💊 Ultimate Weekly Pill Organizer & Dispenser (Gravity Cascade System) 💊 Looking for a smart, functional, and stylish way to manage your daily supplements and medications? This Weekly Pill Organizer features an…
Wydruk około 4,51 €–5,51 € nettoWstępna wycena jednego wariantu
Print-in-place tape dispenser. Almost takes no more place than the tape-roll itself, so it can fit in your pocket. No supports required. Tested with PLA and PETG, may also be printable in ABS and any other rigid materials. The design…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This artistic desktop ornament features a floating skull within, thanks to the ingenious use of bridges enabled by 3D printing technology. For optimal results, it is recommended to print the piece with a layer height of 0.2 mm and with…
Wydruk około 13,66 €–16,69 € nettoWstępna wycena jednego wariantu
UPDATES 02/03/2024: STEP files added The idea of this print is to have plantes suspended in the edges of the aquarium, having only the roots sumerged in the water. The model has 2 pieces, the ring that is fixed by pressure on the edge of…
Wydruk około 7,24 €–8,85 € nettoWstępna wycena jednego wariantu
Diametre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N°1 Pack N° 3 Pack N° 4 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
I was inspired by the 50mm Tape Dispenser Cutter. But it didn't work to my liking I drew it to my liking.
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
Holds 10 rolls of bags and has screw holes to be wall mounted, or use two sided tape/Command Strips to attach. Bag rolls are about 30mm in diameter and 61mm wide, so this dispenser might work with others. Initially designed without the…
Wydruk około 8,50 €–10,39 € nettoWstępna wycena jednego wariantu
Battery dispenser for IKEA Skadis Board. Holds up to 11 AA & 11 AAA batteries. There is also version only for AA batteries .
Wydruk około 2,69 €–3,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 27-Aug-2024 I've got feedback about Clearance is too big for some printers. So I reuploaded new stl file with tighter tolerance. I also upload Original Fusion 360 File for customization and tolerance adjust. Just need to modify…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
UPDATED STL FILES An actually useful remix of the classic toilet paper holder. This one can actually be used to dispense the paper. A fantastic gift to give to your friends. Printed from black PETG. I use an epoxy glue to connect the…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE Featured on the @Prusa Blog: Prusament PLA ColorMix feature https://blog.prusa3d.com/prusament-pla-colormix-print-45-color-shades-using-just-five-filament-spools-and-more_137835/ Added .gcode and .3mf files for ColorMix. Thanks,…
Wydruk około 6,16 €–7,53 € nettoWstępna wycena jednego wariantu
Wanted a single piece print for the can dispenser, and just placing the parts together in prusaslicer was leaving wall lines in the part where the connectors were, so reworked it in fusion to make each side be a single part with no…
Wydruk około 5,66 €–6,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Unser Quark ist immer alt geworden, da es keinen richtigen Deckel gibt. Ich habe einen simplen slide-on Deckel entworfen. Sollte dieser nicht passen, schau mal hier vorbei (Neuere Version):…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Diamètre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N° 2 Pack N° 3 Pack N° 4 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Easy to print. No supports needed. Simply load flossers as seen in picture, insert twister, snap on base. Designed to work with Meijer brand interdental flossups . Also works with Aim brand precision floss picks (thanks @Lacemaker!). Will…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
This newer model has a smoother design to it and is a replicated speed cube. The cube is slightly more difficult than the original design (Rubik's Cube by Anton Granata) to print and build. This design also requires a very small amount of…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Works with both Prusa SL1 and SL1S Speed printer. The Prusa SL1/S Speed Drip Adapter holds the build platform at an angle to allow excess resin dripping of the platform and model. The fixture is rigid and frees up both hands to release…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With thse Spell Slot Trackers you have the number of open spell slots for your caster always in sight. One d6 dice per spell slot level is used to keep track of the number of open slots. This version "Half Caster" has dice slots for spell…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
Diametre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N° 1 Pack N° 2 Pack N° 3 Pack N° 4 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
This is a simple, elegant wall mounted rack for storing table tennis balls. The balls are held securely and won't be dislodged by wind if, like ours you have them stored on a verandah, but they are easy to remove and replace one at a…
Wydruk około 7,46 €–9,12 € nettoWstępna wycena jednego wariantu
Ergonomic Solder Paste or Flux syrynge extrudes dispenser extruder Simple but effective and comfortable to use, large surface area touching the plam of your hand Easy to print Print instructions print oriented with flat surface to bed (…
Wydruk około 1,83 €–2,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Specs Holds bag rolls up to 35mm diameter, 65mm wide. ✅ AmazonBasics ✅ Frisco … and many others! Print tips 🧩 2 parts: Main body and “pin”. Print separately for cleanest finish. ⮑ Print body left side down. Print pin upside down. ✨…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
This is a remix of the Rugged Box Parametric by Whitey. This box is designed to hold 100 .38 Caliber, or .38 Special rounds in two removeable trays. The center rib on the box base corresponds to the slots on the bottom of the ammo trays.…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Print, assemble, screw into overhead space. Slide roll in and down once the holders are in the roll. Pull up then out to remove empty core. Print instructions Print
Wydruk około 11,35 €–13,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Diametre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N° 1 Pack N° 2 Pack N° 3 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
This is a dispenser for tampons. Made for diameters up to ca. 20mm and a length of 55mm, e.g. “o.b. comfort super plus”. Holds around 15 - 20 pieces. Ideally the pieces roll down the slope. Sometimes they can get stuck. A little shaking…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
I got a new Nespresso machine (Vertuo) for my birthday. I have decided to rint my own dispenser for the pods. I wanted something useful and easy to print. The model comes with 2 parts: Bottom and Cover. Those parts can be fit on a Prusa…
Wydruk około 4,54 €–5,55 € nettoWstępna wycena jednego wariantu
Simple, "classic" speedway motorcycle wall decoration. The gcodes are for 0.6mm nozzle. Stl/3mf may be added later.
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
I couldn't find a “key” that had both parts on it, so I sketched this one up
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Just a tea dispenser with 70mm x 80mm x 110mm measurements. It prints best with the hollow side up and some support structures for the front side. You can stack them or put them together, since there is a notch that goes into the next…
Wydruk około 7,99 €–9,76 € nettoWstępna wycena jednego wariantu
I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
An in-line splitter box for any standard Neutrik D series type connector. Insert whatever Neutrik D type connector you require, wire up however you want and away you go! Hours of audio fun. Print instructions Supplied Print file is PLA.…
Wydruk około 2,69 €–3,29 € nettoWstępna wycena jednego wariantu
This model is a modified version of the model on SketchFab by TheKnightDuck. My goal was to experiment with overhangs and try to minimize supports by changing angles in the model. I used Blender with proportional editing and sculpting. I…
Wydruk około 3,95 €–4,82 € nettoWstępna wycena jednego wariantu
This wallmount allows you to place your LEGO Speedchampions Car's in an 45° degree angle off the wall. It will fit all cars which have the basepart as you see in one of the pictures, like these: Lamborghini Countach #76908, Koenigsegg…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Something special - a small amazing shiny star that has fallen right from the sky. A small thank you to all of our supporters and the people who downloaded our models. We reached lately 100 000 downloads which is just so amazing for us!…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
The dispenser is printed with Prusa's clear PLA and an 0.6 mm Nozzle. I recommend supports and a layer-height of 0.30 mm
Wydruk około 7,87 €–9,62 € nettoWstępna wycena jednego wariantu
Do you still have a stock MK3S or MK3S+ and need a bit more speed out of it for day-to-day stuff? This is the answer. This is my 0.32 layer height profile for 0.4 nozzles with every tweak I could come up with and I also included my custom…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
I created that shooting patch dispenser to replace the standard paper patch dispenser while they get wet and don't work very well after a while. In case the lid is not holding as expected, a small tesafilm strap can be used to secure body…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Diametre 9 cm - Epaisseur 2 mm - Soyez prudents en les decollant du lit, certaines parties sont assez fines Diameter 9 cm - Thickness 2 mm - Be careful when taking them off the bed, some parts are quite thin Pack N° 1 Pack N° 2 Pack N° 3…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
About I'd been rolling around ideas on how to design a SideKick for the 4 nozzles on each side of the Core One INDX design. I started working before release by using various photos and video stills to guesstimate certain measurements. As…
Wydruk około 4,07 €–4,98 € nettoWstępna wycena jednego wariantu
A dispenser for twelve standard 608 bearings compatible with the IKEA Skadis perforated board system. When printing, it is recommended to use a gyroidal infill and lower print speeds to maintain maximum precision, so that the bearings do…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
Took the base of the Nutella Candy Dispenser from Sui77 and removed the threads, I then added new threads and raised them up to fit a regular mouth mason jar. I have also added a wide mouth version. 0.2mm layer height, 20%infill, 2 walls.…
Wydruk około 11,25 €–13,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The other models are really neath, but I wanted a 6 speed gear and something to put it on my keys for my car. So here you go, I remixed the other models in something I can use better.
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
V2 - jetzt Online Wenn Sie auf der Suche nach einer modernen und praktischen Wandhalterung für Ihr Specialized Ladegerät SBC-C07 sind, dann ist die Halterung die perfekte Lösung für Sie. Die Wandhalterung bietet eine sichere und stabile…
Wydruk około 24,11 €–29,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This speedboat floats upright with no change of infill and the hull is optimized for speed. This boat is also really stable when it is not moving or moving slowly because how how the hull is designed. This model does require support. The…
Wydruk około 2,59 €–3,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was pleasantly surprised that a light touch of my thumb released just one card at a time. The spring seems to work. It holds 1 - 10 cards. It only took one design iteration to get the spring to work correctly. I know, I should have put…
Wydruk około 2,94 €–3,60 € nettoWstępna wycena jednego wariantu
I needed a container like the fish store uses that can hang on the side of my tank. This will be useful for acclimating new fish as well as a place to hold fish while performing certain tanks maintenance tasks.
Wydruk około 9,48 €–11,59 € nettoWstępna wycena jednego wariantu
Un clip et deux versions de crochets pour suspendre des balais, des pelles, … bref du rangement / one clip and two versions of hooks for hanging brooms, shovels, ... more and more storage
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
This is a remix, the original model was made for ~35mm nozzles and didn't fit my 32mm ones, so I decided to create my own version of it. The diameter of the tip is 31.4mm and it increases to 32.2mm , it friction fits very nicely any 32mm…
Wydruk około 3,65 €–4,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a IQOS Heets Spender to organize the heets in a more beautiful way. I made a base and an extension to get more heets in one spender and print it with my Prusa. There are 2 versions. One with pentagon holes, one without. I tried…
Wydruk około 2,22 €–2,72 € nettoWstępna wycena jednego wariantu
I just needed a way of storing my Isopropyl cleaning wipes. I looked around on Thingiverse did not find anything that matched what I wanted, so I quickly made some measurements and created this storage box / Dispenser. The Swabs Measure…
Wydruk około 3,44 €–4,21 € nettoWstępna wycena jednego wariantu
With this ReFill System you can store your filaments that are without the stands on the side!
Wydruk około 7,40 €–9,04 € nettoWstępna wycena jednego wariantu
This is as close as possible to the original Speedybee VRX cover, the only difference being that is actually fits the HDZero Goggles :-) The pictures show slightly earlier version of the cover. I've moved the USB port 1mm to the side so…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
“Gyro the Dodo - Ultimaker Special” is an awesome test print originally developed by an artist named Virtox to show off the capabilities of Ultimaker printers. After building my MMU3 and ordering some BVOH for soluble supports, I was…
Wydruk około 22,14 €–27,06 € nettoWstępna wycena jednego wariantu
Výdejní věž na dlaždice hry Karak upravená tak, aby pasovala do mých insertů. Pojme všechny dlaždice včetně rozšíření Regent. Víko lze zvolit: jednobarevné bez draka jednobarevné s drakem dvobarevné s podbarveným drakem (stáhněte upravený…
Wydruk około 1,36 €–1,67 € nettoWstępna wycena jednego wariantu
Greenhouse with special Carrots Mini greenhouse: A special money gift idea. The base is 150 mm long with a width of 120 mm, the total height to the roof is 130 mm. I built this little greenhouse for my girlfriend's birthday because she…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This print is a remix of a frog sculpture I found here: https://www.myminifactory.com/object/3d-print-frog-sculpture-3d-scan-59240 I scaled the original by 50%, and created an opening in the inside to hold a postage stamp roll, with an…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
Simple cover for your Prusa SL1S Speed tank protecting resin and display from damage. Fits between tank screws, without removing them. The cover is easy to keep clean and protects the resin from UV-light is printed in a black filament.…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello there! As I was upgrading my manufacturer sound system in my BMW E46 I noticed the original speaker covers killed a lot of the sound. After some research speaker covers with honeycomb design turned out as a good choice, as its…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
“Years ago" Inspired by all kind of clever solutions at the time, I designed a dispenser for 330ml cans which printed in only 4 pieces on my BIG 3D printer (~450mm x 450mm x450mm) which rests in piece ;-( Luckily the local brewery decided…
Wydruk około 4,07 €–4,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For those of you who place solder paste on a PCB by hand using a solder paste syringe, this tool provides additional control and consistency to the application process. Parts Printed: Syringe Holder [A] Syringe Plunger [B] Knob [C] 1ml…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Also doubles as a great way to suspend clippings in your tank :) 0.2mm layer height, 3 perimeters, no infill. ASA/ABS or PETG recommended.
Wydruk około 6,88 €–8,41 € nettoWstępna wycena jednego wariantu
This is a 3D Printable model of a Fallout 4 Mini Nuke which has provision for a Bluetooth speaker and RGB lighting in a translucent top that can be used as a nightlight or just as a display piece. Re-Mix Notes The Fallout 4 Mini Nuke…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
!!! To avoid scratching the frame, it is best to line the center with something soft (old handlebar tape, bicycle inner tube). !!! Maximum pipe width 40mm, height depends on the screws used (you can print) Sample link:…
Wydruk około 1,38 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Protective case for PWM Fan Speed Control module as it can be purchased by DONKGER on Amazon (and probably on other platforms too :) ) I provide the FreeCAD project file, in case you want to make changes to the design. Print Settings…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a special winter edition of the shopping cart coins. This is your ticket to use your shopping cart. You can keep the chip on your keychain, inside your pocket or in your car :) Or even better, you can hang the chips on your…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Speaker icon to mark an object.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Spell AoE (Area of Effect) Damage Marker for Tabletop RPG Games on a Standard Square Grid. This Model includes multiple areas in one object, so you don't have to carry 5 to 8 AoE-Markers around. It has also different heights for different…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
A simple and effective dispenser for laundry or dishwasher pods. Mounted to the wall with two screws or 3M Command strips. Supports on for the overhang in the mouth of the dispenser. I printed in PLA at 0.3mm Layer height, 2 Perimeters, 3…
Wydruk około 8,40 €–10,27 € nettoWstępna wycena jednego wariantu
I design this model for my girlfriend She wanted a pads dispenser to make more elegant than just letting the box of pad in the bathroom. The cap snap in the box, i have print both of them in PLA I have pretty big hand but the hole is well…
Wydruk około 3,52 €–4,31 € nettoWstępna wycena jednego wariantu
This a first subset of my new RC car project. I'm trying to replicate as much as possible a European medium compact car at 1/12 scale (in the likes of a Peugeot 3008). Usually, these cars don't have a double wishbone suspension so I had…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
This is a speed square I designed. It has measurement increments of ¼" with numbers every inch. It also has angle measurements every 15 degreed and labeled on one side. Edit: Model can be printed vertically for better clarity on numbers…
Wydruk około 5,27 €–6,44 € nettoWstępna wycena jednego wariantu
I recomand scale 77% x 77% x 70% 17.3.2022 - Release version 1.0 29.3.2022 - Updated version - bigger pipe and better stop
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I bought some shifters which use the I-Spec B mounting interface, but I don't have the accompanying brakes. Part of this was an experiment to see if 3DP plastic could repeatably stretch over the bar & still adequately clamp. This would…
Wydruk około 3,77 €–4,60 € nettoWstępna wycena jednego wariantu
Works really great to aim the tweeters at the users ear level. Beware: Takes a little shuffling to fit onto the build plate, but it does fit in to the standard Prusa i3 MK3/s build volume.
Wydruk około 17,90 €–21,88 € nettoWstępna wycena jednego wariantu
spent primer catcher with side pipe for garden hose / tube with 12mm inner diameter. just klick in place. tube direct to a bucket or use adapter and drill a hole in water bottle cap for easy dispensing. modded the catcher and made also a…
Wydruk około 4,84 €–5,91 € nettoWstępna wycena jednego wariantu
This tape dispenser is designed for a maximum width of tape rolls of 20mm. The inner diameter of the roll should ideally be about 26mm to keep the roll from coming off on its own and to still allow for easy installation of the tape roll…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
Für den Seifenspender wird noch eine handelsübliche Seifenpumpe benötigt die aufgeschraubt wird. Die obere Abdeckung habe ich mit Sekundenkleber besfestigt.
Wydruk około 8,67 €–10,60 € nettoWstępna wycena jednego wariantu
If your MEC 600Jr Mark V is mounted to an Inline Fabrication Quick Change plate, you've probably noticed that the spent primer catch tray that comes with the MEC does not fit properly because the rear-right mounting screw that comes with…
Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu
Here's my design of a Master Spool for the Filament by Spectrum refil . Drawn in Fusion 360 Print instructions ¤ No support. ¤ Use .3mf or .gcode for presliced settings. ¤ Print in Prusament PETG Signal White ¤ Print in Prusament PETG Jet…
Wydruk około 8,97 €–10,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE - 22 November 2020 Added a set of new caps for Aux Jack mods. There is a flat cap with Aux Jack. Additionally, there are caps with the 3/4" stub with just the jack, the jack + 2 circuit holes, and the jack + 4 circuit holes. There…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hoth Snow Speeder ATMOS Cooler Badge. + Solo Hoth Snow Speeder. USE AtmosSnow for Cooler badge.
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
Praktischer Spender Für Wattestäbchen / Q-Tipps
Wydruk około 5,96 €–7,29 € nettoWstępna wycena jednego wariantu
speed increases 20mm/s every 5mm
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
VFA (Vertical Fine Artifacts) test models for a wide range of Prusa Core One printing speeds from 40 to 350 mm/s. There are notches 5 mm apart at the edge of the models, marking speed changes in 10 mm/s increments. To observe VFAs, you…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
What? This is a printable solution for laying out the components for your Overnight Sensation crossover board, as well as wiring them up. Unlike other designs, this one uses terminal blocks for the connections, and features clearly…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena jednego wariantu
These herringbone spur gears fit the National Geographic Professional 2 Pound Rock Tumbler Kit , which is known for being much too fast compared to other popular tumblers on the market. This gear reduction slows the speed from about 80-85…
Wydruk około 3,16 €–3,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Other versions: 27.03.2022: ClipOn Handle for SL1/S Speed Platform V3 29.07.2021: ClipOn Handle for SL1/S Speed Platform Handling the build platform full of resin can be messy or unsafe if it is dropped - worse if dropped into the tank or…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This suspended jack-o-lantern comes with a slot in the back so you can insert a 1.5in diameter tea light inside so that you have that classic night time look! simply slide the tea light in and gently place the cover over the opening.…
Wydruk około 22,92 €–28,02 € nettoWstępna wycena jednego wariantu
Note: Non-Magnetic Version Also Available Note: Non-Magnetic Version Also Available Valentine twists on my minimalist magnetic incense holder. Perfect for a little home decor. Easily swap the incense stick and align the incense stick back…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
This one is designed to be printed with tree supports and the results are fantastic on my MK4. I printed mine in Overture Professional PLA (Electric Blue) and it's nearly flawless. The dispensing window works well. There's also a pair or…
Wydruk około 3,00 €–3,66 € nettoWstępna wycena jednego wariantu
Little Green Army Women : Explosive Ordnance Disposal (EOD) Specialists
Wydruk około 2,56 €–3,12 € nettoWstępna wycena jednego wariantu
Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.
Wydruk około 6,77 €–8,27 € nettoWstępna wycena jednego wariantu
Here's a magnetic paperclip dispenser inspired by those sold by maped. I use an 10mm magnet. If you print it at more than 0.10mm you'll need some support. That's why there are 2 g code files, 1 with supports and 1 without. Print detail :…
Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu
Hi, I'm an amateur “bastlíř”. I'm the proud owner of a 3d printer i3 MK3S+ and I want to find out the limits of this printer and how else than 3dbenches. I want to share this experience with you. For each version I always write its pros…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
![Cupid's Arrow Incense Holder And Tray (Magnetic & Non-Magnetic) [Valentine Special]](https://media.printables.com/media/prints/1180061/images/8896176_a49f4f86-d3f5-4666-ab53-246b6d039e68_32f973bf-ae84-4c08-950f-d852de9c1a1f/mid-shot.jpg)
