1706 modeli
Project A compact case for the SanDisk Extreme Portable SSD (SDSSDE61) that holds the SSD, USB-C cable, and USB-A adapter. Cable and adapter fit comfortably in the case while the SSD has a snug fit and will not slide out accidentally. The…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This HDD / SSD Caddy Is fully funtional. It clicks in perfectly. It also shows the lights of the drive status. Compatibility It works on a HP Proliant DL360 G7 Server (Tested) but should also work on any HP Servers that use the same Caddy…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
The TerraPi EVO is a dual SSD case for the Raspberry Pi, that uses the 2.5″ sata SSD drives as the case, placing the Pi board between the disks. It comes only in dual SSD drive configuration. It utilizes the USB 3.0 port to connect a…
Wydruk około 2,50 €–3,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Put all your spare disk drives in one place. Use this to organize a spare parts pile or line up your cold spares for your NAS. Fits 8x 3.5" disk drives and 3x 2.5" disk drives. Print settings: WARNING: Large print across entire build…
Wydruk około 17,35 €–21,20 € nettoWstępna wycena jednego wariantu
Adapter for the 4,1 and 5,1 Mac pro (2009-2010) to fit smaller HDD or SSD on the mount meant for bigger HDD. It will only work with SATA drives, because that's what the computer uses. The 4 small printed bolts are not strictly necessary…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Horizontal 1U Rackmount for ZimaBoard with support for between zero and two, 7mm high SSD. If installing 2 x 7mm this will take the overall height over the 1U height (44.5mm) to around 51mm. The rack mounting holes are designed for M6…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do you have a dead SSD and an unshatterable ego? Then look no further, print this, superglue the two sides together, and attach it to your bag, purse, keys or anything you desire! Originally created cause I thought M.2 SSDs kinda looked…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please note this design should be considered a BETA , I'm still making some tweaks for the following: Improve all hangers to make latching less stiff Improvements to PCIe hanger. Modular 3U Rackmount for ZimaBoards , to be co-located with…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This storage box can take up standard 2.5" HDDs, SSDs, SODIMM RAM and regular ram. The print is pretty tolerant, use whatever settings you see fit. I recommend between .3 to .4mm layer height and a layer thickness of about .4 to .5mm.…
Wydruk około 3,13 €–3,82 € nettoWstępna wycena jednego wariantu
A very simple SSD enclosure, I used it to chuck 8 disks into a server chassis without any hassle. It holds 10 SSDs of 7mm (¼") thickness. Print with 10% gyroid/grid infill, no support.
Wydruk około 7,92 €–9,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To fix the frame with the 2.5" drive, use the original screws that are used to fix the 3.5" drive to the cabinet. K upevnění rámečku s 2,5" diskem použijte originální šrouby které se používají k upevnění 3,5" disku do skříně.
Wydruk około 0,84 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a housing for: Wemos D1 Mini / ESP8266 ESP-12 0,96" OLED Display I2C SSD1306 CO2: Senseair S8 as well as MH-Z19 is fitting I've soldered a BMP280 and a SHT21 for temperature and humidity together Used DuPont cables Many…
Wydruk około 1,53 €–1,86 € nettoWstępna wycena jednego wariantu
Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution Keep your external hard drives and SSDs organized and protected with this custom-designed storage organizer. Built to securely hold a variety of drive…
Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu
Ve škole máme spoustu stoletých OptiPlexů. V rámci upgradu jsem je vybavil novými SSD disky, ale nechtěl jsem disky mít jen tak na volno v původních šachtách. Protože se továrně vyráběné rámečky prodávají za (pro školství)…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This holder is designed to hold multiple external HDD & SSD. It is stackable for compact footprint on desk. Max size of SSD & HDD holded : 123 x 83 x 21mm Print parameters : PLA or PETG Noze 0.4 with 3 perimeters for separators (for clip…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
This simple case enables you to bring a second life to old 2.5 inch hard drives from old laptops or other devices This adapter is sized to fit the Anker USB 3.0 to SATA Adapter available on Amazon The enclosure features small retention…
Wydruk około 5,00 €–6,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple little print that I found very useful for keeping the USB adapter and cable organised/together with the SSD. I printed this in Overture TPU. It prints in under 20 minutes in TPU. It prints in under 10 mins in PLA/PETG.…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Enclosure for RPI3B+ with X850 V3.1 SSD. Part list 4x M3x30mm
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Support de disque dur 3.5 ou 2.5 ou SSD avec trous de fixation externes filetés pour vis 6 x 32 et supports etiquettes à l'avant. ------------------------------------------------------------------------------- 3.5 or 2.5 HDD or SSD holder…
Wydruk około 3,44 €–4,21 € nettoWstępna wycena jednego wariantu
This is a simple mount for your RC car's shock absorbers so that you can easily change the oil. ----- Dies ist eine einfache Halterung für die Stossdämpfer deines RC Autos, damit du den Ölwechsel ganz einfach erledigen kannst.
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
Modification of original Malolo's screw-less Raspberry case - “Bottom_Base_SM” with additional slot for SSD drive's PCB ! Make sure to adjust the pillars spacing to fit the holes of your PCB ! Instructions: Pop open your SSD drive and…
Wydruk około 1,99 €–2,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have a very good experience with the usage of Verbatim Vx500 external SSD connected to my Raspberries 4B (flight radar with multiple data consumers, Home Assistant), so I have decided to create a very simple holder for them. Original…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Adapter to mount Geekworm X1001 NVME SSD hat to the passively cooled Edatech ED-Pi5Case-B for the Raspberry Pi 5. The included standoffs with the X1001 won't fit, so this is an adapter. Print in PETG or another heat resistant material,…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model holds 2 8mm terrace-glassdoors in place Just a simple 90° twist and the door stays in place. The gap between the 2 panels is approximately 10mm. Minimum is 9mm. For rigidity reasons a M5 x 60mm is used. Printed with Prusament…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…
Universal 2.5" SSD/HDD to 3.5" HDD bay adapter. No screws required Supports side rails Recommended to print in PETG No supports required NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA…
Design I designed a converter for a 2.5" HDD to fit in my PS2 (with the network adapter, and the SATA mod) without it floating around. The bracket slides into place, where it holds firmly. Hardware All you'll need are some small screws to…
First of all, thank you for clicking on and maybe printing my model :D Pi 5 case, following the design of my Pi 4 case . The top and mid-frame remain unchanged. For FDM printing i recommend PLA or some other stiff fillament. !!! Official…
This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…
Needs an M2x3 or M2x4 screw for attaching the SSD to the computer. Pusa Slicer: Filament -> Cooling -> min print speed probably needs to be set to 3 or there might be defects on your printed part. Things will probably get pretty toasty in…
I couldn't find any decent reference models for a standard 2.5" Hard Disk Drive (HDD) / Solid-State Drive (SSD) that included a non-STL source file. I've created this reference model and want to share the STEP file in addition to the STL.…
Adapter to hold 2x 2.5" drives in a single 3.5" bay. Remixed from Tadziurski 's, original design here . 10/19/24- Per requests, I have added a model with the third set of mounting holes for 3.5" bays. I have also added a model with…
This is a slim compact case for a SSD1306 I2C 0.96" OLED Display Screen. The case was designed based on the measurements of this model I ordered from AliExpress. Other boards do vary slightly, and the model's clearances are very tight. A…
Display housing for SSD1306/SSH1106 1.3" OLED display and Wemos D1 Mini. There are many use cases like Octoprint Display, Tasmota or ESP Easy to name just a few - you may need to follow the respective guides and instructions online. I use…
This model was inspired by another model https://www.printables.com/model/924041-raspberry-pi-5-case-with-pineberry-hatdrive-bottom , but it's not a remix. The case was designed completely from scratch (no reverse engineering). The case…
Adapter that will let you use a standard (~100mm x 70mm x 7mm) 2.5" HDD or SSD in a modded Xbox 360 Slim (aka Xbox 360 S). Just slide the drive in, and then plug into your 360. Be sure to pay attention to the orientation of the plug.…
I would suggest PETG at 0.2 layer height.
The Cloud Gateway Max gets hot! Do not print in PLA!
I could not find the right adapter. That's why I designed this for my "be quiet" case. I tried to keep it as simple as possible. It should work for other 3.5 "bays of course. Print instructions Category: Computer Print Settings Printer…
I have a lot of M.2 SSD drives that I use for different projects and purposes, but I always struggled to find a good way to store them safely and conveniently. Most of the storage solutions I found online were either too bulky, too…
Made this hard drive case to compliment my Orange Pi 3 LTS case. The cable I use with this is a Startech SATA to USB 3.0 adapter. While not a rugged case. It's more or less designed to add a little bit of protection while this Pi and HDD…
SSD Stackers (as well as the old "Dual SSD Stackers") are meant to allow you to stack and mount two or more 2.5" drives (SSD or HDD) together, and then be mounted in desktop computer cases that have mounting holes for only a single drive…
Very basic adapter to mount two 2.5" SSD drives in a common 5.25" drive bay. You can use the modifier mesh to remove top and bottom surfaces in those areas and save both time and filament. It uses M3 screws and nuts. Print Settings…
The only thing worse that the subscription model, are overpriced accessories that should have been included! I made this for myself, as I will only use it with a 2280. So, if you're are only going to use a 2280 too, have at it. Includes a…
This is my second case for RPI4 (previous: https://www.thingiverse.com/thing:4715068 ) Now I used 40x40x10 fan, or can be used 40x40x20 fan. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Doesn't Matter…
The case is designed for 2.5" SSDs according to the dimensions below: The case preserves access to the mounting holes : Printing is done without supports and in the orientation below : Assembly is done without screws or glue but by…
MSI does not include the bracket for the secondary NVME SSD slot in the box with the laptop, you have to contact their RMA service for them to send you the bracket ! So that is what I did, and this model is as close of a replica as I…
I changed the Original Parts to fix some “issues” and create a new housing for my Octoprint Monitor ;) Changes: -rounded the houding edges for a smoother look -create a bezel for a 0.96" OLED -make the bezel rotatable for “Tate Mode”…
This is a hybrid between 2 prints I had found on Thingiverse that had ups and downs. The first one fit perfectly, but the front looked horrendous. The second didn't fit well, but looked great. I mixed them and used that to make a cleaner…
This is only my third 3D print. I made the adjustments using TinkerCAD. I used PETG filament and an Anycubic Kobra S1 printer.
M.2 ssd Adapter Set sizes 2230 to 2242, 2230 to 2260, 2230 to 2280, 2242 to 2280, 2260 to 2280
Made a project box for the ESP32 WROOM (although most ESP32 boards have the same form factor), with a lid for the 0.96" OLED screen. It houses multiple access points for wiring, and a small 10mm slot for the touch sensors. I use a folded…
3D Printable Caddies that you can use to adapt the 3 ½" storage bays of a 45Drives Storinator (AV15, Q30, S45 or XL60) or 45Drives Homelab HL15 server to accommodate a standard 2 ½" 7mm SSD or 2 ½" 15mm SSD. You'll want to use these M3 x…
Inspired by a model at thingiverse (https://www.thingiverse.com/thing:3544454) But needed something to be laser cut. Designed to enclose the drives, which is why the ends are not symmetrical. You will (obviously) need two identical parts…
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SC93301 or MCP-220-00075-0B HDD Status LED's are functional with additional 2mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" I have a pair of…
SSD HDD caddy mounting for HP EliteDesk ProDesk. Just add M3x8 screws and you are all good to go.
Update 2026-03-25: Migrated files to FreeCAD 1.1.0 Stable. This adapter allows you to convert a 3.5" drive bay into a triple 2.5" SSDs/HDDs drive caddy. Unlike bolted adapter designs, you can easily replace individual drives without…
This mod will void your SSD's warranty but makes using them for recording much more convenient. Assembly requires two original screws and three additional M3x8 ones for the lid.
I created this case for a Pi 4 (with POE HAT), a 2.5' Hard Drive and a SATA to USB adapter. There is a slot on the IO side of the case that can be used to store the excess cable for the SATA to USB adapter which makes this case slightly…
This is an adaptation of the m.2 ssd adapter by janek0809. I took their existing Fusion 360 file and edited it to fit an m.2 2230 ssd to a 2280 slot. I also filleted a bunch of sharp corners. The nice thing about this design is that it…
This case is designed to hold a Raspberry Pi-5 and a standard 2.5” (7mm thick) SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card. It’s a clip together design that requires no screws. The Pi and…
This case is designed to hold a Raspberry Pi-5 and two standard 2.5” (7mm thick) SATA SSD’s. It is based on my Raspberry Pi-5 SSD Case that was originally designed for a single SSD. The two SSD’s are mounted on top of each other, with…
My 2nd design for my Raspberry Pi 5's (with the official Active Cooler), designed on my Pi 5 using Freecad / LibreCAD. This design keeps the micro-SD card safe inside the case boundaries and provides enough ventilation to keep the temps…
This case is designed to hold a Pi-4 and a standard 2.5” SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card. I’ve previously created a headless version that allows for the PoE+ Hat. The Pi and SSD…
After 5 years of testing and many modifications, this is likely the final version. (I was wrong, I found that a little extra rigidity helped when using on a dell/hp slot or rail mounting system, v8 helps with that) We have fixed all…
EDITED: 11/1/2022 - I added a one piece bottom - BOTTOMasONEpieceREVISED-STL0 . I have not tested this personally as I don't have a printer big enough to fit it. If you print it, let me know how it goes and I might be able to adjust it if…
Description This design was inspired by Szmalus' excellent design: https://www.thingiverse.com/thing:3850735 However, it didnt feature a fan mount and the SSDs were needed as a structural element of the case. Since I often need to swap…
We designed this to allow for drive expansion on our data recovery server. It has fit all standard optical bays we have tested it in and allows you to fit an extra 2.5" from the bottom or 3.5" drive from the sides. If you find any…
This is a tool less replacement adapter of the SSD caddy of the Atomos Ninja V. No screws or tools are needed in order to use your SSD with your Atomos. Also included is the clip (you have to print two of them) for the Smallrig 2209 cage…
M.2 adapter 2230 to 2280 simple and fast print
SSD tray to replace the original UACC-SSD-Tray
I've noticed that Corsair only includes two SSD mounts in their Corsair 4000D Airflow case but offers four spots to mount them. Since I have some additional drives laying around and need those four slots, I jumped into CAD and copied the…
The possibility of adding modules as desired 9 mm for SSD 12 mm 2.5" standard drive VER 2: https://www.thingiverse.com/thing:2768186 Print instructions Category: Organization Print Settings Printer: Vertex K8400 Rafts: No Supports: No…
2.5" inch HDD/SSD holder for Synology DiskStation NAS It is suitable for both 7mm and 9.5mm height disks Equivalent to Synology Disk Holder (Type C) I have made it for my DS118, but in theory it should be also suitable for the following…
Este es un adaptador de discos duros de 3,5 pulgadas a 2,5 o a SSD. He diseñado este adaptador con todos los soportes posibles para tornillos. Es adaptable a todas las cajas que vengan con huecos para HDD grandes. En el extremo de los…
10-Zoll-Rack-Frontplatte für 2 Raspberry Pi 4 und SSDs Überblick: Diese maßgefertigte 10-Zoll-Rack-Frontplatte ist speziell für die Montage von zwei Raspberry Pi 4 entwickelt. Sie ermöglicht eine ordentliche Integration der Raspberry Pi…
2.5" HDD and SSD Holder – 5 Slot Organizer 💾✨ Keep your 2.5" HDDs and SSDs neatly organized with this practical 5-slot holder ! Perfect for tech enthusiasts and professionals alike, this holder ensures your drives stay secure and easy to…
I wanted to use a low profile PCI slot to mount a 2.5" SSD in a 2U case for my Unraid server but I didn't see any manufactured nor any available to print out. So, I designed my own. I've not yet got to install it as I'll have to make time…
Modified version of the original model that is now stackable
I recently bought Samsung T5 SSD external drive for video editing. It really annoys me to have this thing laying on my table so I designed simple holder to clip the drive on top of my laptop lid. This version is designed for 9 mm thick…
Just a quick enclosure I made for this Inland SSD I wanted to put in an ITX case and take up a little bit less room. Not sure what other SSDs it would work with. Maybe someone will find use for it.
Simple design of the famous SSD1306 0,96" OLED display for your assemblies.
This is a small SSD mounting adapter for my Synology DS218+. Theoretically this should also work for other "slot"-type drive cages. Note that the latch is missing the little pin on the front. Original source for the adapter plate:…
I wanted a sweet little home for my external SSD connected to my 2024 Mac Mini, therefore I've made myself a little Dock I'd like to share. For better Reference, the Dock is shared in this video of mine (german language): The SSD is fixed…
case for the SSD1306 OLED display. after inserting the display, heat and press the 4 pins to lock it, or glue it use supports only from the print bed for the screw holes post a make!
Made in accordance with the blueprint specs. 7mm tall drives are usually SSD, while 9, 12 and 15mm are HDDs.
This is a custom HDD caddy for the original Xbox. Transferring files over FTP is capped at 10MB/s, which can be painfully slow. I wanted a faster way to move files by taking the drive out and connecting it directly to my PC. The problem…
2x1 size gridfinity bin with cutouts for M.2 drives up to size 2280. Height is 3 units
Modelled and printed an SSD case. My cable has a very wide connector, so the SSD has to be screwed to the case. Print Settings Printer: Sovol SV01 Rafts: No Supports: No Resolution: 0.3mm Infill: 100% Filament: Xingtong Zhi Lian PLA White…
A reference model to use
Super silent case for Raspberry Pi 4 with mount for HDD(SSD). Case is cooled by 12V old power supply from pc fan 80x80x25 mm. Fan is connected to 5V Raspberry out that cause fan is super silent. Practically no noise from fan. Temperature…
SanDisk SSD drive mounting gadget with 25mm Mini Suction Cups, you need to purchase the Mini Suction cups from Amazon or anywhere else that has the same dimensions here is the link where I got mine AMAZON - print with support. - 15%…
Samsung T7 Shield SSD Drive Bracket 20mm clear or 50mm made for my mini studio Apple stand with filter ( upload in future ).
odd→ssd bay can use original front pannel
Harddisk adapter for 2.5" to 3.5" Adapter has screw holes in same place as 3.5" harddrive
These 3D-printed computer hard drive adapters serve as a bridge between different-sized hard drives and the standard 3.5-inch hard drive bays commonly found in desktop computer cases and hot-swap/tray systems. Here's a breakdown of the…
Enclosure for a 2.5" hard drive without need for screws. It is designed to hold the hard drive only with friction, so the accuracy is relatively important (or you can add pieces of paper to make it secure). -Added .step file -Added…
SSD Drive Cage for 4 2,5-Inch SSD drives. The foot has the same hole pattern as standard SSDs and can be mounted the same as drives would be. Printing: Printed on a Prusa MINI with PCTG, but can be printed in other materials too.…
