Wyniki wyszukiwania: ssupd

Sortowanie

57 modeli

P
Printablesm1che1

SSUPD Meshlicious Fan Mount 92mm

The SSUPD Meshlicious fan mount is inspired from chaosmage project. I have optimized the holder to be more stable and is not blocking any airflow. With this fan mount you could improve the VRM and mainboard cooling. Fits perfectly for…

Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu

Pobrania
1075
Polubienia
46
Ocena
5
P
PrintablesNooneNos

SSUPD Meshlicious Power Button Switch Guard

A simple switch guard for the power button to prevent it from being pressed unintentionally. It can be attached and removed easily and is held in place by the pressure from the USB A port. The USB C part of the print fits loosely into its…

Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu

Pobrania
170
Polubienia
14
Ocena
0
P
PrintablesMalax

SSUPD Meshroom S Feet (Multiple Heights)

Feet for SSUPD's Meshroom S PC case. Improves ventilation and allows usage of standard (non-angled) DisplayPort cables. Uses existing holes in the case that are located below the rubber feet the case ships with. You have to remove those…

Pobrania
556
Polubienia
24
Ocena
5
P
PrintablesBadNoodle

SSUPD Meshlicious 45mm Riser

The riser works with the stock Meshlicious rubber feet. No supports should be needed as long as you print with the feet facing up. I printed this on an extended ender 3, if you have a smaller printer, you may need to split the model in…

Pobrania
436
Polubienia
40
Ocena
5
P
PrintablesRGI

SSUPD meshlicious clip

SSUPD meshlicious clip

Pobrania
418
Polubienia
27
Ocena
5
P
PrintablesEddieCoast

SSUPD Meshlicious Side Panel Extension

I've you've ever decided to commit to a small-form-factor (SFF) PC build but then later decide actually, no? Then this is the part for you. When assembled on the motherboard side, this side panel will give you another 27mm of height…

Pobrania
353
Polubienia
24
Ocena
0
P
PrintablesEddieCoast

SSUPD Meshlicious Front Panel Extension

The Meshlicious is a great ITX case, in no small part because it supports a 280mm radiator mounted to the front panel. Unfortunately, mounting a radiator and fans inside the front panel makes the inside really cramped, and I found it…

Pobrania
339
Polubienia
25
Ocena
5
P
Printablest3chguy

SSUPD Meshroom display output bracket DP + DP + HDMI

Uses 1 ADT-Link A7-A8Q HDMI 2.1 15cm Extension and 2 ADT-Link P7A-P8T-BL DisplayPort 1.4 15cm Extensions. Onshape Link

Pobrania
302
Polubienia
23
Ocena
5
P
Printablesrsdesign

SSUPD Meshlicious rear GPU cable bracket for extension cables

UPDATE 26.01.2022: Different combination of cable types are now added. The following options are now available: DP Vertical / DP Horizontal HDMI Vertical / DP Horizontal HDMI Vertical / HDMI Horizontal DP Vertical / HDMI Horizontal…

Pobrania
287
Polubienia
20
Ocena
5
P
Printablesap_3

SSUPD Meshroom S front extender

This is a front extension panel for the Meshroom S which uses the native case hardware (no clips needed). I used ASA to make sure it would survive the heat of the case, but other materials may be suitable. I found several options for…

Pobrania
282
Polubienia
18
Ocena
0
P
Printablesivtue

SSUPD Meshroom D 25mm Tall Feet

This are 25mm tall feet for the SSUPD Meshroom D. These are ~18mm taller than the original so your GPU can get more airflow for lower temperatures. Note: these do not fit the Meshroom S. Printed in PLA with a 0.6mm nozzle and 0.3mm layer…

Pobrania
266
Polubienia
13
Ocena
5
P
PrintablesSasquatch

SSUPD Meshroom S Case Feet

Meshroom S Case Feet Upgrade Kit – These feet raise your case by 20mm to optimize airflow and create space for HDMI/Display cables. Installation is easy using the Phillips head screws included with your case. The feet seamlessly integrate…

Pobrania
241
Polubienia
7
Ocena
0
P
Printablesm1che1

SSUPD Meshlicious ADT Link Cables Bracket (DP and HDMI)

This bracket is designed for the SSUPD Meshlicious, to provide a more comfortable access to the video output ports. We have optimized the bracket for ADT Link DisplayPort and HDMI cable. You could use the bracket with the following ADT…

Pobrania
236
Polubienia
18
Ocena
0
P
Printablesrsdesign

SSUPD Meshlicious Fan Holder 92mm with better Airflow

I modded the fan holder for the SSUPD Meshlicious from chaosmage. I didn’t like that the cut out for the fan was blocking some airflow and also added some ramps to assist the stability of the part. Fits great and im still able to route…

Pobrania
213
Polubienia
11
Ocena
0
P
PrintablesAqua

SSUPD Meshelicious Tophat for 140mm fan

This tophat is designed to place a 140x25mm fan on top of the case to help with the extraction of hot air. There are two prepared variants, one to print the thing in one piece (Meshelicious_Tophat_v2) and there is one that is printed in…

Pobrania
195
Polubienia
17
Ocena
0
P
PrintablesDreoni

SSUPD Meshlicious Male Case Clip

Male case clip that fit in the SSUPD Meshlicious. They are quite resistant/flexible in PETG. Just press the “wings” to fit in the slot. Used for my tool-less front expansion mod:…

Pobrania
194
Polubienia
8
Ocena
0
P
Printablesserverlicious

Custom 9x HDD Array Sled System for SSUPD Meshlicious

Refer to reddit and PM me there if you need help with this: Serverlicious: An SFF NAS with 9x HDDs for UNRAID and Plex : sffpc (reddit.com)

Pobrania
164
Polubienia
27
Ocena
0
P
PrintablesEddieSha

SSUPD Front Fan Extension

Didnt like any of the front extensions available at the time I got my case so I decided to design my own. Full part and cut parts included so you can print depending on your bed size. If I could've, I would've done a one piece print but…

Pobrania
159
Polubienia
13
Ocena
0
P
PrintablesPR

SSUPD Meshroom S V2 1.25in 32mm Front Extension

I fixed the size inaccuracies with the previous version by shortening the bottom piece by 1.651 mm and making the dove tails 1 mm wider for a better fit. Print with the pegs facing up. No supports.

Pobrania
139
Polubienia
8
Ocena
0
P
PrintablesBlackOilCoder

SSUPD Meshroom D - 120mm Side Fan Mount and 120mm slim (15mm) Top Fan Mount

This is a set of fan mounts for the SSUPD Meshroom D ITX PC case. The original case allows for the mounting of a 120mm or 140mm side exhaust fans using a series of rails. These rail span the entire width of the case and can interfere with…

Pobrania
130
Polubienia
13
Ocena
0
P
Printablesrsdesign

SSUPD Meshlicious mount for Phanteks Neon light strip

Designed a better solution to mount the Phanteks Neon light strip around an ITX board. It helps to keep the strip in line with the mainboard. Some points to keep in mind. It is offset at the bottom for the pci riser in the SSUPD…

Pobrania
98
Polubienia
11
Ocena
0
P
PrintablesEddieCoast

SSUPD Meshlicious GPU Cable Snap Panel

The Meshshshlishshshious has a small square cut out on the rear for your GPU cables. While some people have used this space to create panels for screw-on DisplayPort or HDMI adapters, I bought 90-degree adapter cables that were too long…

Pobrania
97
Polubienia
13
Ocena
0
P
PrintablesMENYA

SSUPD MESHROOM D - Power bracket (SFX only)

Installing SFX power will allow you to move the front IO ports up to allow installation of longer graphics cards. m3 - Secure with bolts about 10 to 12 mm long and four M3 nuts. A 60mm exhaust fan can be added. You can also add a 2.5" SSD…

Pobrania
97
Polubienia
5
Ocena
0
P
PrintablesProjectsupra

SSUPD Meshroom S V2 Noctua NF-A9 92mm top fan mount

SSUPD Meshroom S V2 Noctua NF-A9 92mm top fan mount & GPU bracket I made for my SFF build, I believe this will only work for the Meshroom S V2, not the V1. Works perfectly with my EVGA 3080 FTW with the metal support GPU bracket mounted.…

Pobrania
88
Polubienia
9
Ocena
0
P
PrintablesEddieSha

SSUPD Angled Feet (40mm tall)

Designed my own feet for the SSUPD Meshilicous as I wasn't a fan of the printable options from SSUPD's website or anything I could find on line. The main issue I wanted to mount a 140mm on the bottom of my case for more airflow, so I…

Pobrania
70
Polubienia
5
Ocena
0
P
PrintablesProjectsupra

SSUPD Meshroom S V2 rear GPU slot cover

SSUPD Meshroom S V2 rear GPU slot cover.

Pobrania
69
Polubienia
7
Ocena
0
P
PrintablesProjectsupra

SSUPD Meshroom S V2 rear GPU mount hdmi display port adapter

SSUPD Meshroom S V2 rear GPU mount & hdmi & display port adapter I made for my SFF build. This works perfectly with my EVGA 3080 FTW mounted in the highest position, It may interfere with longer graphics cards mounted in the lower…

Pobrania
68
Polubienia
12
Ocena
0
P
PrintablesPaul Lützner

SSUPD Meshlicious Samsung T7 Shield Dock

I needed more space but didn feel like spending money on SATA SSDs. So I bought an external one and made a Dock for my PC Case. Works really well. you could probably even use an internal USB Header and not use one from the back. It's…

Pobrania
66
Polubienia
10
Ocena
0
P
PrintablesEddieSha

SSUPD Rear Displayport/HDMI Faceplate

Rear faceplate with DP and HDMI as requested on Reddit. Category: Other

Pobrania
63
Polubienia
1
Ocena
0
P
Printablestoaster

Ssupd Meshroom IcemanCooler reservoir mount

This model allows mounting of the Iceman Cooler pump/reservoir combo onto the backside of the Ssupd Meshroom case. Unlike the ssupd marketing material, I chose to mount this onto the Horizontal PCI card slot by removing the existing…

Pobrania
60
Polubienia
8
Ocena
0
P
PrintablesuSD_cardlord

Ssupd Meshlicious SFX bracket replacement

I bought my meshlicious second hand and its SFX bracket was missing, which appears to be happening to at least one other person . Enough for me to put in the work! I did not want to miss the support of the rubber block at the bottom of…

Pobrania
56
Polubienia
4
Ocena
5

Ssupd Meshroom S - Iceman reservoir holding-bracket

Just recently I created this bracket per customer request. It was not very complicated however and only took an hour and a few test prints, so I might as well share it here. Feel free to use it for your own project, if you own a 3D…

Pobrania
47
Polubienia
5
Ocena
0
P
PrintablesZoo42

SSUPD Riser cable cover for Meshlicious

Didn't like the red bar on the riser cable, so I made a cover for it. It's a nice tight fit.

Pobrania
43
Polubienia
6
Ocena
0
P
PrintablesMENYA

SSUPD MESHROOM D - Foot (front power button)

This is a MESHROOM D foot that is higher than the original foot to improve air circulation and allows you to move the power button on the back to the front. There is a genuine power button type and a 12mm power button type.

Pobrania
43
Polubienia
1
Ocena
0
P
PrintablesEddieSha

SSUPD Meshilicious - Displayport and HDMI Feet

Front and Rear Feet for SSUPD Meshilicious that holds (2) Displayport adapters and (1) HDMI Adapter

Pobrania
40
Polubienia
4
Ocena
0
P
Printablesrsdesign

NCASE Lian Li SSUPD side panel clips extended 0.1 - 1mm

Requested remix for sidepanel adjustment to fit some higher cooler / pumpblocks in the SSUPD Meshilicious. NOT TESTED from my side. Category: Replacement Parts

Pobrania
40
Polubienia
3
Ocena
0
P
Printablest3chguy

SSUPD Meshroom 4090 FE Support Bracket

Adds a lot more rigidity and makes me far more comfortable moving my meshroom around Slim fan can fit atop Onshape Link

Pobrania
39
Polubienia
8
Ocena
0
P
PrintablesEric Chan

SSUPD Power Button Guard

Remix of NooneNos' guard with accessibility for USB-A adapters.

Pobrania
38
Polubienia
1
Ocena
0
P
PrintablesEddieSha

SSUPD Meshilicious - Dual 60mm Top Fan mount (3 slot GPU mode)

Did like the solutions available for one large slim fan that just sits on the spine that separate the case. Came up with this mount for (2) 60mm fans that sits above the motherboard side. Secured in place with one screw.

Pobrania
34
Polubienia
4
Ocena
0
P
PrintablesPiotr

SSUPD Meshroom S PC case feets (15, 20, 25, 45, 50, 55 and 60mm height)

SSUPD Meshroom S feets in 15, 20, 25, 45, 50, 55 and 60mm. Should also work well with NCase M2 and M3. Needed hardware (multiply by the number of feets) 1x M3x5x4 heatset 1x M3 bolt of 6, 8 or 10mm length (OPTIONAL) 1x M3 shim/washer,…

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesEddieSha

SSUPD GPU Fan Mounts

120mm GPU side fan mounts for the SSUPD Meshilicious Category: Other

Pobrania
32
Polubienia
9
Ocena
0
P
PrintablesM3 ro

SSUPD Meshlicious 45mm Riser with LED

Updated the original Model with a Lid to add an LED-Strip. Printed 5mm with transparent Filament. Layer Height: 0.2 Set a pause to change Filament at Layer 95 and 120

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesScHAmPi

SSUPD Meshlicious I/O bracket 2 x DisplayPort + Drain

Inspired by the many other designs available on thingiverse. Mostly based mine off of SSUPD Meshlicious rear GPU cable bracket for extension cables by fanatic789 . Thanks bud! I redrew it from scratch myself because I needed to add the…

Pobrania
30
Polubienia
4
Ocena
0
P
PrintablesEddieSha

SSUPD Rear Displayport Faceplate

Saw all the different IO mounts for the SSUPD Meshilicious and want something just slight different. Originally design it with (3) DisplayPort opening but due to the GPU support bracket that comes with the case I couldn't get the third…

Pobrania
28
Polubienia
1
Ocena
0
P
Printablesantimongo

SSUPD Meshroom S V2 Sandwich Display Bracket (High GPU Position)

Uses the adapter's panel mount screws to secure the bracket to the case. Will flex slightly when installing/removing, but stiff enough. Printed well with basic PLA, just had to slow down the first layer for all the details. F3D Archives…

Pobrania
22
Polubienia
4
Ocena
0
P
PrintablesLuci

SSUPD Meshlicious bracket for EK-AF passthrough port.

This bracket allows you to fit an EKWB EK-AF passthrough at the top of your SSUPD Meshlicious PC case to use as a fill/bleed port. The port is recessed and does not interfere with the lid of the case. This version fits the case with the…

Pobrania
22
Polubienia
2
Ocena
0
P
Printablesuzsbou

SSUPD Meshroom D Better Bottom

I hated the bottom of my SSUPD Meshroom D case as well as the look of my GPU. I stripped the shroud off the GPU and designed this mod for the bottom of the case to replace the fans of GPU as well as provide more structure to the bottom of…

Pobrania
19
Polubienia
3
Ocena
0
P
Printablesbigrjsuto

SSUPD Meshroom V2 Bracket for Additional 3.5" Drives

There are holes for 4 different locations to place 3.5" drives in different configurations of the SSUPD Meshroom V2. The two upper locations are not mentioned in the manual. One of these upper locations cannot easily be used due to a…

Pobrania
19
Polubienia
4
Ocena
0
P
PrintablesEddieSha

SSUPD Meshroom S V2 5090 Astral Mount/Support Bracket & Case Feet

A simple and sturdy mount using existing holes in the SSUPD Meshroom S V2 to more securely hold an Asus 5090 Astral in the case. The PCIE extender is mounted but using lower mounting points, with the 10mm standoffs and is a slightly angle…

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesTandou Chelik

SSUPD Meshroom S V2 Riser Stand / With 92mm Fan support

I have modofied the model made by BadNoodle that now matches 1 to 1 to Meshroom S V2. Cheers.

Pobrania
10
Polubienia
2
Ocena
0
P
Printableszgolas

SSUPD Magnetic Top Bracket

This bracket isn't particularly sturdy, but its flexibility allows you to test various fan positions to find optimal performance before creating a more customized design. Only tested with the SSUPD Meshroom S V2 so unsure if it works for…

Pobrania
7
Polubienia
3
Ocena
0
P
Printablesprestia

SSUPD Meshroom S V2 front extender

I needed a small extension to access my SATA ports. The best one I could find on Printables was 1.651 mm too tall and had near-useless dovetails. I fixed both of those issues. Simply print this piece and combine with Meshroom S 35mm…

Pobrania
3
Polubienia
1
Ocena
0
P
Printables

SSUPD Meshelicious Tophat for 140mm fan

This tophat is designed to place a 140x25mm fan on top of the case to help with the extraction of hot air. There are two prepared variants, one to print the thing in one piece (Meshelicious_Tophat_v2) and there is one that is printed in…

P
Printables

SSUPD Rear Displayport/HDMI Faceplate

Rear faceplate with DP and HDMI as requested on Reddit. Category: Other

P
Printables

SSUPD Front Fan Extension

Didnt like any of the front extensions available at the time I got my case so I decided to design my own. Full part and cut parts included so you can print depending on your bed size. If I could've, I would've done a one piece print but…

P
Printables

SSUPD Angled Feet (40mm tall)

Designed my own feet for the SSUPD Meshilicous as I wasn't a fan of the printable options from SSUPD's website or anything I could find on line. The main issue I wanted to mount a 140mm on the bottom of my case for more airflow, so I…

P
Printables

SSUPD Meshroom S Case Feet

Meshroom S Case Feet Upgrade Kit – These feet raise your case by 20mm to optimize airflow and create space for HDMI/Display cables. Installation is easy using the Phillips head screws included with your case. The feet seamlessly integrate…